www.jst.umn.edu
Gloves: Chemical Compatibility
www.jst.umn.edu
Glove Comparison Chart
2http://www.ehs.berkeley.edu/hs/63-laboratory-safety/94-glove-selection-and-usage.html
Incidental contact: little or no direct contact with the hazardous material.Extended contact: handling highly contaminated materials; submerging hands in a chemical or other hazardous substance; need for physical protection from temperature extremes or sharp/piercing objects
www.jst.umn.edu
3
www.jst.umn.edu
4
www.jst.umn.edu
5
www.jst.umn.edu
6
Water based solution, organic solvents, acids and bases, halogenated hydrocarbons
www.jst.umn.edu
Glove Usage
• Wear gloves of a material known to be resistant to permeation by the substances in use.
• Look for an expiration date on individual packages of gloves.• Before use, check gloves (even new ones) for physical damage such as tears or
pinholes. Check reusable gloves for previous chemical damage.• Dispose of gloves when they show any sign of leakage or deterioration.• Select gloves of the correct size and fitting.• Some gloves, especially lightweight disposables, may be flammable: keep hands
well away from flames or other high temperature heat sources.• Replace gloves periodically, depending on the frequency of use and their
permeation and degradation characteristics relative to the substances handled.• Remove gloves before handling objects such as doorknobs, telephones, pens, and
computer keyboards.• When removing gloves, do so in a way that avoids skin contact with a possibly
contaminated glove exterior.• Always wash hands after removing gloves.• Dispose of contaminated gloves properly.• Do not attempt to re-use disposable gloves.
7http://www.dehs.umn.edu/PDFs/gloves.pdf
www.jst.umn.edu
Handling the Heat
• OSHA (U.S. Department of Labor Occupational Safety & Health Administration)– Select gloves that provide guarding and
insulation
8
Heat resistant gloves (attention: never wet the gloves
when you put the autoclaves in water;water is a heat conductor)
www.jst.umn.edu
Prevention and protection
• Read SDS and learn about the temperatures, then select appropriate PPE and employ additional controls
9
Diethyl ether
Top Related