8/20/2019 Ford Aerostar 1996 Owners Manual
1/347
8/20/2019 Ford Aerostar 1996 Owners Manual
2/347
8/20/2019 Ford Aerostar 1996 Owners Manual
3/347
Table of Contents
Introduction .................................................... 1
Instrumentation .............................................. 7
Audio .............................................................. 21
Controls and Features ................................ 59
Seating and Safety Restraints .................. 97Starting ......................................................... 153
Driving ......................................................... 163
Roadside Emergencies .............................. 199
Maintenance and Care ............................. 229
Capacities and Specifications ................. 293
Reporting Safety Defects
(U.S. Only) .................................................. 301Customer Assistance ................................. 303
Accessories .................................................. 315
Quick Index ................................................ 327
Index ............................................................. 335
Service Station Information .................... 356
8/20/2019 Ford Aerostar 1996 Owners Manual
4/347
1
Introduction
Ford’s Commitment to You
At Ford Motor Company, excellence is thecontinuous commitment to achieve the bestresult possible. It is dedication to learning whatyou want, determination to develop the rightconcept, and execution of that concept with care,precision, and attention to detail. In short,excellence means being the standard by whichothers are judged.
Our Guiding Principles
Quality comes first. For your satisfaction, thequality of our products and services must beour number one priority.
You are the focus of everything we do. Ourwork must be done with you in mind,providing better products and services thanour competition.
Continuous improvement is essential to oursuccess. We must strive for excellence ineverything we do: in our products — in theirsafety and value — and in our services, ourhuman relations, our competitiveness, and
our profitability.Employee involvement is our way of life.
We are a team. We must treat one anotherwith trust and respect.
Dealers and suppliers are our partners. Wemust maintain mutually beneficialrelationships with dealers, suppliers, and ourother business associates.
8/20/2019 Ford Aerostar 1996 Owners Manual
5/347
2
Integrity is never compromised. Our conductworldwide must be pursued in a manner that
is socially responsible and commands respectfor its integrity and for its positivecontributions to society.
NOTES and WARNINGS
NOTES give you additional information aboutthe subject matter you are referencing.
WARNINGS remind you to be especially carefulin those areas where carelessness can causedamage to your vehicle or personal injury toyourself, your passengers or other people. Pleaseread all WARNINGS carefully.
RWARNING
Finding Information in This Guide
After you have read this guide once, you willprobably return to it when you have a specificquestion or need additional information. To helpyou find specific information quickly, you canuse the Quick Index, Table of Contents, or theIndex.
The Quick Index at the end of the bookprovides a page number following each itemwhich indicates where detailed information can be found.
To use the Index, turn to the back of the bookand search in the alphabetical listing for theword that best describes the information youneed. If the word you chose is not listed, thinkof other related words and look them up. Wehave designed the Index so that you can findinformation under a technical term.
8/20/2019 Ford Aerostar 1996 Owners Manual
6/347
3
Canadian Owners — French Version
French Owner Guides can be obtained from your
dealer or by writing to Ford Motor Company of Canada, Limited, Service Publications, P.O. Box1580, Station B, Mississauga, Ontario L4Y 4G3.
Your Maintenance Schedule andRecord Booklet
The Maintenance Schedule booklet lists theservices that are most important for keepingyour vehicle in good condition. A record log is
also provided to help you keep track of allservices performed.
About the Warranties
Your vehicle is covered by three types of warranties: Basic Vehicle Warranty, ExtendedWarranties on certain parts, and EmissionsWarranties.
Read your Warranty Information Booklet carefully
to find out about your vehicle’s warranties andyour basic rights and responsibilities.
If you lose your Warranty Information Booklet, youcan get a new one free of charge. Contact anyFord or Lincoln-Mercury dealer, or refer to theaddresses and phone numbers on the first pageof this Owner’s Guide.
Ford Extended Service Plan
M o r e P r ot ect i o n f o r Yo u r V eh i c l e
You can get more protection for your new car orlight truck by purchasing a Ford ExtendedService Plan (Ford ESP). Ford ESP is the onlyextended service program with the Ford nameon it and the only service contract backed byFord Motor Company.
8/20/2019 Ford Aerostar 1996 Owners Manual
7/347
4
Ford ESP is an optional service contract, backedand administered by Ford. It provides:
protection against repair costs after yourBumper to Bumper Warranty expires;
and
other benefits during the warranty period(such as: reimbursement for rentals; coveragefor certain maintenance and wear items).
You may purchase Ford ESP from anyparticipating Ford Motor Company dealer. There
are several Ford ESP plans available in varioustime-and-mileage combinations. Each plan can betailored to fit your own driving needs, includingreimbursement benefits for towing and rental.(In Hawaii, rules vary. See your dealer fordetails.)
When you purchase Ford ESP, you receivepeace-of-mind protection throughout the UnitedStates and Canada, provided by a network of
more than 5,100 participating Ford MotorCompany dealers.
NOTE: Repairs performed outside the UnitedStates and Canada are not eligible forESP coverage.
This information is subject to change. Ask yourdealer for complete details about Ford ESPcoverage.
8/20/2019 Ford Aerostar 1996 Owners Manual
8/347
5
Special Notice
NOTICE TO OWNERS OFE-4WD VEHICLES
As with other vehicles of this type, failure tooperate this vehicle correctly may result in lossof control or an accident. Be sure to read thespecial driving instructions in the sectionElectronic 4-Wheel Drive (E-4WD) in this book.
Federal Highway AdministrationRegulation
Regulations such as those issued by the FederalHighway Administration or issued pursuant tothe Occupational Safety and Health Act (OSHA),and/or state and local laws and regulations mayrequire additional equipment for the way youintend to use the vehicle. It is the responsibilityof the registered owner to determine theapplicability of such laws and regulations toyour intended use for the vehicle, and to
arrange for the installation of requiredequipment. Your Ford dealer has informationabout the availability of many items of equipment which may be ordered for yourvehicle.
Breaking Your Vehicle In
Your new vehicle goes through an adjustment or break-in period during the first 1,000 miles(1,600 km) that you drive it. During the break-inperiod, you need to pay careful attention to howyou drive your vehicle.
Avoid sudden stops. Because your vehiclehas new brake linings, you should take thesesteps:
— Watch traffic carefully so that you cananticipate when to stop.
8/20/2019 Ford Aerostar 1996 Owners Manual
9/347
6
— Begin braking well in advance.
— Apply the brakes gradually.
The break-in period for new brake liningslasts for 100 miles (160 km) of city driving or1,000 miles (1,600 km) of highway driving.
Wheel lug nuts must be retightened to propertorque specifications at 500 miles/800 km of new vehicle operation. Proper torquespecifications are provided in the RoadsideEmergencies chapter. Also retighten to propertorque specifications at 500 miles/800 kmafter any wheel change or any other time thewheel lug nuts have been loosened.
Use only the type of engine oil that Fordrecommends. See Engine oil recommendationsin the Index. Do not use special “break-in”oils.
Things to Know About UsingThis Guide
Congratulations on the purchase of your newvehicle. This guide has information about theequipment and the options for your new vehicle.You may not have bought all of the optionsavailable to you. If you do not know whichinformation applies to your vehicle, talk to yourdealer.
This guide describes equipment and givesspecifications for equipment that was in effectwhen this guide was approved for printing. Fordmay discontinue models or change specificationsor design without any notice and withoutincurring obligation.
8/20/2019 Ford Aerostar 1996 Owners Manual
10/347
7
Instrumentation
The instrument panel (dashboard) on yourvehicle is divided into several different sections.The illustrations on the following pages showthe major parts of the instrument panel that aredescribed in this chapter. Some items shownmay not be on all vehicles.
In your vehicle, the warning lights and gaugesare grouped together on the instrument panel.We call this grouping a cluster. Your vehicle hasa mechanical cluster.
8/20/2019 Ford Aerostar 1996 Owners Manual
11/347
8 A e r o s t a r m e c h a n i c a l c l u s t e r
8/20/2019 Ford Aerostar 1996 Owners Manual
12/347
9
The Mechanical Cluster
The following warning lights and gauges are on
the mechanical cluster. All of the warning lightsand gauges alert you to possible problems withyour vehicle. Some of the lights listed areoptional. The following sections detail what eachof these indicators means.
Brake System Warning Light
The warning light for the brakes can show twothings — that the parking brake is not fullyreleased, or that the brake fluid level is low inthe master cylinder reservoir. If the fluid level islow, the brake system should be checked byyour dealer or a qualified service technician.
This light illuminates when you turn the ignitionkey to START to verify that the indicator bulb isworking. If the light stays on or illuminates afteryou have released the parking brake fully, havethe hydraulic brake system serviced.
RWARNING
The BRAKE light indicates that the brakesmay not be working properly. Have thebrakes checked immediately.
Brake warning light symbol
8/20/2019 Ford Aerostar 1996 Owners Manual
13/347
10
Rear Anti-Lock (ABS) Brake Warning Light
To check the rear ABS brake warning light, turn
the ignition key to the ON position. The rearABS brake warning light should glowmomentarily.
NOTE: If it does not glow momentarily, haveyour vehicle’s electrical system checkedimmediately.
NOTE: If the rear ABS brake warning lightbegins to flash in a repeating flashsequence, check the rear anti-lock
brake system continuous power fuseand brake lights for proper operation.
Rear anti-lock warning light symbol
RWARNING
If the anti-lock brake system warninglight remains on or comes on whiledriving, have the braking system checkedby a qualified service technician as soonas possible.
NOTE: If a fault occurs in the anti-lock
system, and the brake warning light isnot lit, the anti-lock system is disabledbut normal brake function remainsoperational.
8/20/2019 Ford Aerostar 1996 Owners Manual
14/347
11
Safety Belt Warning Light and Chime
This warning light and chime remind you to
fasten your safety belt. One of the following willtake place:
If the safety belt is not buckled when the keyis turned to the ON position, the light comeson for 1 to 2 minutes and the chime soundsfor 4 to 8 seconds.
If the safety belt is buckled while the light ison and the chime is sounding, both the lightand chime turn off.
If the safety belt is buckled before theignition is turned to the ON position, neitherthe light nor the chime will come on.
Safety belt warning light
Door Ajar Light and Chime
This light illuminates along with an audiblechime if one of the doors is not completely shutwhen you turn the ignition to the ON position.
Door ajar light
8/20/2019 Ford Aerostar 1996 Owners Manual
15/347
12
Check Engine Warning Light
This light illuminates when the engine’s
Emission Control System requires service. It willalso illuminate when the ignition key is in theON position and the engine is off.
Check engine warning light
Electronic 4-Wheel Drive Warning Light(If equipped)
The Electronic 4-Wheel Drive Warning Lightilluminates when the Electronic 4-Wheel Drivesystem is not working properly. This lightilluminates briefly when you turn the ignitionkey to the ON position, but should turn off
when the engine starts. If the light does notilluminate when you turn the ignition to the ONposition, or if it illuminates and stays on whenyou are driving, have your vehicle serviced assoon as possible.
The 4WD light will go off after a few secondsand stay off if all systems are operatingcorrectly. If a problem is detected, the 4WDwarning light will flash a certain number of times indicating the location of the problem. Theflashing will continue until the problem iscorrected. Each time the ignition key is turnedon, the controller will detect the problem andflash the signal. The 4WD system remains safe tooperate and the vehicle should be returned forservice.
8/20/2019 Ford Aerostar 1996 Owners Manual
16/347
13
Electronic 4-wheel drive warning light
Charging System Light
This light indicates that your battery is not beingcharged and that you need to have the electricalsystem checked.
Charging system light
This light illuminates every time you turn theignition to the ON or START position (engineoff). The light should go off when the enginestarts and the alternator begins to charge.
If the light stays on or illuminates when theengine is running, have the electrical systemchecked as soon as possible.
Supplemental Air Bag Readiness Light andTone Generator
This light illuminates for six seconds when theignition is turned to the ON position. If the lightfails to illuminate, continues to flash, remains on,or if a series of five beeps is heard, have thesystem serviced as soon as possible.
8/20/2019 Ford Aerostar 1996 Owners Manual
17/347
14
Supplemental air bag readiness light
High Beam Light
This light illuminates when the headlamps areturned to high beam or when you flash thelights.
High beam indicator light
Chime for Headlamps On
This chime sounds if the driver or passengerdoor is open when the parking lamps orheadlamps are on. The chime sounds until youclose the door, turn off the lamps or turn theignition to the ON position.
NOTE: The chime will not sound when theautolamp has activated the shutoffdelay.
Ignition Key Buzzer or ChimeThe buzzer or chime will sound if you open thedriver’s door while the key is in the ignition andin the OFF, LOCK, or ACCESSORY position.Never leave your vehicle unattended with thekey in the ignition.
8/20/2019 Ford Aerostar 1996 Owners Manual
18/347
15
Battery Voltage Gauge (Voltmeter)
This gauge shows you the battery voltage when
the ignition key is in the ON position.If you are running electrical accessories (whenthe engine is off, or idling at a low speed), thepointer may move toward the lower end of thenormal band. If it stays outside the normal bandarea, have your vehicle’s electrical systemchecked as soon as it is safely possible.
If the battery is operating under cold weatherconditions, the pointer may indicate in the upper
range of the NORMAL band while the battery ischarging. If you are running electrical accessorieswith the engine off or idling at a low speed, orthe battery is not fully charged, the pointer maymove toward the lower end of the NORMAL band.
If it stays outside the NORMAL band, have yourvehicle’s electrical system checked as soon as itis safely possible.
Battery voltage gauge
8/20/2019 Ford Aerostar 1996 Owners Manual
19/347
16
Engine Oil Pressure Gauge
This gauge indicates the engine’s oil pressure,
not the oil level. However, if your engine’s oillevel is low, it could affect the oil pressure. Withthe engine running, the pointer should moveinto the NORMAL band. If the pointer drops below the NORMAL band while the engine isrunning, you have lost oil pressure andcontinued operation will cause severe enginedamage.
If you lose engine oil pressure:
1. Pull off the road as soon as safely possible.
2. Shut off the engine immediately or severeengine damage could result.
3. Check the engine’s oil level, following theinstructions on checking and adding engineoil. Refer to Engine oil in the Index. If youdo not follow these instructions, you orothers could be injured. To assure anaccurate reading, your vehicle should be onlevel ground.
4. If the level is low, add only as much oil asnecessary before you start the engine again.Do not overfill. Do not operate the engine if the pointer is below the NORMAL band,regardless of the oil level. Contact yournearest dealer for further service actions.
Engine oil pressure gauge
8/20/2019 Ford Aerostar 1996 Owners Manual
20/347
17
Fuel Gauge
The fuel gauge displays approximately how
much fuel is in the fuel tank only when theignition switch is ON.
For a proper fuel gauge indication after addingfuel, the ignition switch should be in the OFFposition while the vehicle is being refueled.
The fuel gauge indicator may vary slightly whilethe vehicle is in motion. This is the result of fuelmovement within the tank. An accurate readingmay be obtained with the vehicle on smooth,
level ground.
Fuel gauge
Engine Coolant Temperature GaugeThis gauge indicates the temperature of theengine coolant, not the coolant level. If thecoolant is not at its proper level or mixture, thegauge indication will not be accurate.
The pointer moves from the C (cold) mark intothe NORMAL band as the engine coolant warmsup. It is acceptable for the pointer to fluctuatewithin the NORMAL band under normal driving
conditions. Under certain driving conditions,such as heavy stop and go traffic or driving uphills in hot weather, the pointer may move tothe top of the NORMAL band.
If, under any circumstances, the pointer movesabove the NORMAL band, the engine isoverheating and continued operation may causeengine damage.
8/20/2019 Ford Aerostar 1996 Owners Manual
21/347
18
If your engine overheats:
1. Pull off the road as soon as it is safely
possible.2. Turn off the engine.
3. Let the engine cool. DO NOT REMOVECOOLANT SYSTEM FILL CAP UNTILTHE ENGINE IS COOL.
4. Check the coolant level following theinstructions on checking and adding coolantto your engine. Refer to Engine coolant in the
Index. If you do not follow theseinstructions, you or others could be injured.
Engine coolant temperature gauge
Speedometer
The speedometer tells you how many miles(kilometers) per hour your vehicle is moving.
Your vehicle contains a speedometer whichreceives its input from the Anti-Lock brakesensor. The speedometer is also used to provide
a speed signal for correct operation of thevehicle’s Powertrain Control Module (PCM),electronic transmission, and speed control (if soequipped). Because of this, it is veryIMPORTANT to change the speedometer’sinternal conversion constant if the size of thetires on the vehicle is changed. Changing theconversion constant to the proper value when
8/20/2019 Ford Aerostar 1996 Owners Manual
22/347
19
the tires are changed will also ensure that thespeedometer retains the original factory-setaccuracy.
NOTE: The conversion constant can only bechanged six times once the vehicleleaves the factory. Your Ford dealershipservice personnel can change theconversion constant.
Some vehicles are equipped with a vehicle speed(mph/km/h) limiting device that is containedwithin the Powertrain Control Module (PCM).The purpose of this device is to maintain peakvehicle speed below a specified limit. (Vehiclespeed limits may vary based on enginedisplacement.)
If you are experiencing an “engine cut-out”condition at high speeds, it may be the result of this limiting device. It is a normal condition andcan be avoided by reducing vehicle/enginespeed.
Speedometer
8/20/2019 Ford Aerostar 1996 Owners Manual
23/347
20
Odometer/Trip Odometer
The Liquid Crystal Display (LCD) odometer is a
combination trip odometer and total odometer.The total odometer is normally displayed. To seethe trip odometer, press and release the SELECTcontrol on the upper right side of thespeedometer. To zero out the trip odometer,press and release the RESET control on theupper left side of the speedometer while the tripodometer is displayed. If the trip odometer isdisplayed, press and release the SELECT controlto return the display to the total odometer value.
8/20/2019 Ford Aerostar 1996 Owners Manual
24/347
2 1
C o m p a
c t D i s c R a d i o
8/20/2019 Ford Aerostar 1996 Owners Manual
25/347
22
Compact Disc Radio
The Compact Disc Radio combines the Electronic
Stereo Radio with the Ford Compact Disc Player.
Using the Controls on Your New Radio/CDPlayer
Most of the features of this unit work for bothradio and CD operation. Also, some of the knobsand buttons control several different functions,so be sure to read all of the operatinginstructions carefully.
H o w t o t u r n t h e r a di o o n a nd o f f
Press the “POWER” button to turn the radio on.Press it again to turn it off.
H o w t o a dj u st t h e v ol u m e
Press the (/) end of the “VOL” button toincrease/decrease the volume. Bars illuminate inthe display to show the relative volume level.
NOTE: If the volume level is set above acertain listening level when theignition switch is turned off, when theignition switch is turned back on, thevolume will come back to a “nominal”listening level. However, if the radiopower is turned off, the volume willremain in the position it was set atwhen radio power was switched off.
Sel ect i ng the AM or FM frequency band
Push the “AM/FM” button to select the desiredfrequency band. When in the radio mode,pushing the button more than once will alternate between AM, FM1 and FM2. These functions areused with the station memory buttons describedunder How to tune radio stations.
8/20/2019 Ford Aerostar 1996 Owners Manual
26/347
23
H o w t o t u n e r a di o st a t i o ns
There are four ways for you to tune in a
particular station. You can manually locate thestation using the “SCAN/TUNE” button,“SEEK” the station, “SCAN” to the station orselect the station by using the memory buttons,which you can set to any desired frequency.These four methods are described below.
Using the “SCAN/TUNE” button to manuallytune
You can change the frequency up or downone increment at a time (FM changes inincrements of 200kHz; AM changes inincrements of 10kHz) by first pressing the“SCAN/TUNE” button twice (display shows“TUNE”), then — within approximately fiveseconds —pressing and releasing either thetop (a) or bottom (b) half of the “SEEK” button. To change frequencies quickly, pressand hold down either the top or bottom half
of the “SEEK” button. While you aremanually tuning, the display will show a blinking “M.”
Manual tuning adjusts your radio to anyallowable broadcast frequency, whether ornot a station is present on that frequency.(See All About Radio Frequencies in thissection.)
8/20/2019 Ford Aerostar 1996 Owners Manual
27/347
24
Using the “SEEK” function
This feature on your radio allows you to
automatically select listenable stations up ordown the frequency band. Press the top (a)half of the “SEEK” button to select the nextlistenable station up the frequency band.Press the bottom (b) half of the button toselect the next listenable station down thefrequency band. By pressing and holding the button, listenable stations can be passed overto reach the desired station.
Using the “SCAN/TUNE” button to scanradio stations
Pressing the “SCAN/TUNE” button onceenters the scan mode (display will indicate“SCN”). Pushing the top (a) half of the“SEEK” button will begin the scan mode upthe frequency band, stopping on eachlistenable station for approximately fiveseconds. Pushing the bottom (b) half of the
“SEEK” button will begin the scan modedown the frequency band, again stopping oneach listenable station for approximately fiveseconds.
To stop the scan mode on the presentlysampled station, press the “SCAN/TUNE” button again.
8/20/2019 Ford Aerostar 1996 Owners Manual
28/347
25
Setting the Station Memory Preset buttons
Your radio is equipped with 5 station
memory buttons. These buttons can be usedto select up to 5 preset AM stations and 10FM stations (5 in FM1 and 5 in FM2). Followthe easy steps below to set these buttons tothe desired frequencies.
1. Select a band, then select a frequency.
2. Press one of the memory preset buttons andhold the button until the sound returns. Thatstation is now held in memory on that
button.3. Follow the two steps above for each station
memory preset button you want to set.
NOTE: If the vehicle’s battery is disconnected,the clock and station memory presetbuttons (if programmed in auto mode)will need to be reset.
Using the Automatic Memory Load feature
You can activate the Auto Memory Loadfeature by pressing and holding the “AUTOPRESET” button for approximately threeseconds. Auto Memory Load sets all memory buttons in AM, FM1 and FM2 sequentially byseeking out the first five strong stations forthe respective band and storing them inmemory buttons 1-5. (FM2 will store thesecond set of strong stations from the FM band.)
With Auto Memory Store, you can continuallyset strong stations into your memory buttonswithout losing your existing memory presets,which is especially helpful while traveling. Yourradio will automatically set your memory buttons to the strong local stations so you don’thave to continually manually tune to existingstations.
8/20/2019 Ford Aerostar 1996 Owners Manual
29/347
26
Activate Auto Memory Store by pushing the“AUTO PRESET” button once. Your radio willset the first five strong stations of the band you
are in (AM, FM1 or FM2) into the memory buttons. The display will show “AUTO,” thenrun through the frequencies, stoppingmomentarily on the stations being set into thememory buttons. The radio is now in the“AUTO” mode and the display will show“AUTO” each time a preset is activated.
NOTE: If there are fewer than five strongstations in the frequency band, the
remaining unfilled buttons will storethe last strong station detected on theband.
After all stations have been filled, the radio will begin playing the station stored on memory button 1.
To deactivate the Auto Memory Store mode andreturn to the manually-set memory button
stations (or those stations set using AutoMemory Load), simply push the “AUTOPRESET” button. Display will show “AUTO”then “OFF.” The next time Auto Memory Storeis activated on that band, the radio will store thenext set of five strong stations.
8/20/2019 Ford Aerostar 1996 Owners Manual
30/347
27
U s i n g th e “A U D I O” b utt o n t o a dj u st th e tone balance and speaker output
Increasing or decreasing bass responsePush the “AUDIO” button repeatedly untilthe display reads “BASS.” Push the “+” sideof the “VOL” button to increase bass (more“lows”), and push the “-” side to decrease bass (less “lows”).
Increasing or decreasing treble response
Push the “AUDIO” button repeatedly until
the display reads “TREB.” Push the “+” sideof the “VOL” button to increase treble (more“highs”), and push the “-” side to decreasetreble (less “highs”).
Adjusting speaker balance
Balance control allows you to adjust thesound distribution between the right and leftspeakers. Push the “AUDIO” button
repeatedly until the display reads “BAL.”Push the “+” side of the “VOL” button toshift the sound to the right speakers, andpush the “-” side to shift the sound to theleft speakers.
Adjusting speaker fader
Fade control allows you to adjust the sounddistribution between the front and rearspeakers. Push the “AUDIO” buttonrepeatedly until the display reads “FADE.”Push the “+” side of the “VOL” button toshift the sound to the front speakers, andpush the “-” side to shift the sound to therear speakers.
8/20/2019 Ford Aerostar 1996 Owners Manual
31/347
28
NOTE: Illuminated bars in the display showrelative levels of bass and treble andpositions of speaker balance and fader
functions after adjustments are made,then revert to volume level set.
Clock operati on
When in the radio mode, push the “CLOCK” button to switch from radio frequency to clock.Only the clock numerals will be displayed in theclock mode — there is no AM/PM indication.When in the clock mode, the time will be
displayed until the button is pushed again.However, if you retune the radio while it is inthe clock mode, the new radio frequency will bedisplayed for approximately ten seconds andthen change back to clock display.
When in the CD mode, push the “CLOCK” button to change the display from elapsed timemode to track number mode to clock mode. If the CD track selection is changed when you are
in the clock or elapsed time mode, the new tracknumber will be displayed for approximately tenseconds and then revert back to the previousmode.
The clock can also be viewed with the ignitionoff. Push the “CLOCK” button and the time will be displayed momentarily.
To set the clock, simultaneously press the“CLOCK” button and either the bottom (b) half
of the “SEEK” button to set hours, or the top(a) half of the “SEEK” button to set minutes.
8/20/2019 Ford Aerostar 1996 Owners Manual
32/347
29
Using the Controls on Your New CompactDisc Player
Your new Ford Compact Disc Player is capableof playing 12 cm or 8 cm discs, without anadapter. The player operates when the power ison and a disc is inserted (label side up). Handlethe disc by its edge only. (Be sure to read andfollow all of the care and cleaning instructionsunder How To Take Care of and Clean Your CDPlayer and Discs.)
NOTE: If after you insert a disc, the disc isejected and “ERROR” begins scrolling
in the display, remove the disc andreinsert it right side up (label side up).
The digital display on your CD player willeither show the track (selection) number or theelapsed time. (The display mode can be selected by pressing the “CLOCK” button.) Indicators forplay (a), stop (X) and compression on (“C”)are also in the display. (These features aredescribed later.)
Once a disc is inserted, operation of the CDplayer will override that of the radio.
NOTE: The volume, bass, treble, balance andfader controls on the radio are alsoused with the CD player. Refer toearlier operating instructions aboutthese controls.
H o w to i n ser t a d i sc a n d b egi n p l a y
Insert one disc, label side up into the discopening. When inserted, the disc automaticallyloads into the unit and play starts at the beginning of the first track (selection).
When the disc reaches the end, the disc playerautomatically returns to the beginning of thedisc and resumes playing.
8/20/2019 Ford Aerostar 1996 Owners Manual
33/347
30
NOTE: Once a disc is inserted, the discopening is secured to prevent theaccidental insertion of a second disc.
NOTE: The CD player has heat protectioncircuitry to protect the laser diode. Ifthe temperature of the player reaches167˚F (75˚C), the heat detection circuitwill shut off the player and “TOOHOT” will scroll in the display forapproximately five seconds (radio willresume playing). When the temperaturereturns to normal operating range, the
CD player will again be operational.H o w to sto p a nd r esta r t th e CD p l a y er
When a disc is loaded, the unit automaticallyenters the play mode and the play indicator (a)illuminates. To stop temporarily, press the“PLAY/STOP” button or the “AM/FM” button.The stop indicator (X) in the display illuminatesand operation returns to the radio mode. Toresume CD play, press the “PLAY/STOP” button once again.
NOTE: If the ignition key is turned OFFduring play and then is set to the ONor ACCESSORY position, the CDplayer will resume playing in the modeit was in when ignition was turned off.
U sing t he “SEEK” feature
The “SEEK” feature allows you to quickly find aparticular selection on the disc.
Press the bottom (b) half of the “SEEK” buttononce to repeat the current playing selection.Press the top (a) half of the “SEEK” button toadvance to the next selection.
8/20/2019 Ford Aerostar 1996 Owners Manual
34/347
31
Pressing and holding the bottom (b) or top (a)half of the “SEEK” button will scroll backwardand forward respectively through the tracks.
H o w to fa st fo r w a r d o r r ev er se y ou r C D player
To quickly search for a particular point in aselection, press the “FF” button (to fast forward)or the “REV” button (to reverse). While either button is pressed, the disc goes forward or backward at two different speeds depending onhow long the button is held down. (Pressing
either button for more than three seconds willspeed up the process.) Release the button at thedesired point (found by watching the elapsedplaying time in the display or by listening to thesound during fast forward or reverse). Whenyou have reached the beginning of track 1, theCD player will begin playing.
When you have reached the end of the disc bykeeping the fast forward button pressed, thedisplay will show “END” and the player will gointo pause mode. Push the “PLAY/STOP” button to begin playing the first track of thedisc, press the “REV” button to back up fromthe end of the disc, or use the “SEEK” functionto locate a desired track.
U si ng t he “SCAN ” functi on
Press the “SCAN/TUNE” button to enter thescan mode. Once in the scan mode, press the top
(a) or bottom (b) half of the “SEEK” button toscan forward or reverse, respectively. The CDplayer will begin scanning the disc, stopping oneach listenable track for approximately eightseconds. This continues until you press the“SCAN/TUNE” button a second time. While inthe scan mode, the display shows the currentsampled track number.
8/20/2019 Ford Aerostar 1996 Owners Manual
35/347
32
Speci al featur es of your CD play er
Compression
The compression feature will bring soft andloud passages closer together for a moreconsistent listening level.
To turn the compression on, press the“COMP” button. When on, the compressionindicator (“C”) will appear in the display.Press the button again to turn off.
Automatic Disc Storage
If the disc is ejected from the CD player butis not removed from the disc opening withinapproximately 10 seconds, the player willautomatically reload the disc for storage,unless the disc is automatically ejected due toa “focus error” (disc inserted upside down).In this case, the disc will not be automaticallyreloaded.
H o w to ej ect th e d i sc Push the “EJECT” button to stop play, eject thedisc and resume radio operation of your audiosystem.
NOTE: You can eject the disc while the radiopower and/or ignition is on or off.
How To Take Care of and Clean Your CDPlayer and Discs
To ensure the continued performance of yourFord Compact Disc Player, carefully read thefollowing precautions:
Always handle the disc by its edge. Nevertouch the playing surface.
8/20/2019 Ford Aerostar 1996 Owners Manual
36/347
33
Before playing, inspect the disc for anycontamination. If needed, clean the disc withan approved disc cleaner, such as the
Discwasher
Compact Disc Cleaner or theAllsop 3 Compact Disc Cleaner, by wipingfrom the center out to the edges. Do not usea circular motion to clean.
Do not clean discs with solvents such as benzine, thinner, commercially availablecleaners or antistatic spray intended foranalog records.
Do not expose the disc to direct sunlight orheat sources such as defroster and floorheating ducts. Do not leave any discs in aparked car in direct sunlight where there may be a considerable rise in temperature ordamage may result.
After playing, store the disc in its case.
If a disc has already been inserted, do not tryto insert another disc. Doing so may damage
the disc player.
Do not insert anything other than a disc intothe disc player.
NOTE: The use of optical instruments withthis product will increase eye hazard asthe laser beam used in this compactdisc player is harmful to the eyes. Donot attempt to disassemble the case.
Refer servicing to qualified personnelonly.
8/20/2019 Ford Aerostar 1996 Owners Manual
37/347
34
Common Operating Conditions of YourCD Player
The following information is designed to helpyou recognize typical situations that could bemistakenly interpreted as mechanicalmalfunctions of the disc player.
A disc is already loaded.
The disc is inserted with the label surfacedownward.
The disc is dusty or defective.
The player’s internal temperature is above140˚F (60˚C). Allow the player to cool off before operating.
Different manufacturers of compact discs mayproduce discs with different dimensions ortolerances, some of which may not be withinindustry standards or in accordance with theCD format. Because of this, a new disc that isfree of dust and scratches could be defective
and may not play on your Ford CompactDisc Player.
If play does not begin once the disc has beeninserted:
The radio is not on.
The unit is in the stop mode.
Moisture may have condensed on the lenseswithin the unit. If this occurs, remove the
disc and wait approximately an hour until themoisture evaporates.
If the sound skips:
Badly scratched discs or extremely roughroads will cause the sound to skip. Skippingwill not damage the disc player or scratch thediscs.
8/20/2019 Ford Aerostar 1996 Owners Manual
38/347
3 5
H i g h - L e
v e l A u d i o S y s t e m
8/20/2019 Ford Aerostar 1996 Owners Manual
39/347
36
Using the Controls on Your New Radio
H o w t o t u r n t h e r a di o o n a nd o f f
Press the “POWER” button to turn the radio on.Press it again to turn it off.
H o w t o a dj u st t h e v ol u m e
Press the (/) side of the “VOL” button toincrease/decrease the volume. Bars illuminate inthe display to show the relative volume level.
NOTE: If the volume level is set above a
certain listening level when theignition switch is turned off, when theignition switch is turned back on, thevolume will come back to a “nominal”listening level. However, if the radiopower is turned off, the volume willremain in the position it was set atwhen radio power was switched off.
Sel ect i ng the AM or FM frequency band
Push the “AM/FM” button to select the desiredfrequency band. When in the radio mode,pushing the button more than once will alternate between AM, FM1 and FM2. These functions areused with the station memory buttons describedunder How to Tune Radio Stations.
8/20/2019 Ford Aerostar 1996 Owners Manual
40/347
37
H o w t o t u n e r a di o st a t i o ns
There are four ways for you to tune in aparticular station. You can manually locate thestation using the “SCAN/TUNE” button,“SEEK” the station, “SCAN” to the station orselect the station by using the memory buttons,which you can set to any desired frequency.These four methods are described below.
Using the “TUNE” function (Stereo Radio)
You can change the frequency up or downone increment at a time (FM changes in
increments of 200 kHz; AM changes inincrements of 10 kHz) by first pressing the“SCAN/TUNE” button twice (display shows“TUNE”), then — within approximately fiveseconds —pressing and releasing either theright a or left b side of the “SEEK” button.To change frequencies quickly, press andhold down either the right or left side of the“SEEK” button.
Manual tuning adjusts your radio to anyallowable broadcast frequency, whether ornot a station is present on that frequency.(See All About Radio Frequencies in thissection.)
Using the “SEEK” function
This feature on your radio allows you toautomatically select listenable stations up or
down the frequency band. Press the right(a) side of the “SEEK” button to select thenext listenable station up the frequency band.Press the left (b) side of the button to selectthe next listenable station down thefrequency band. By holding the button down,listenable stations can be passed over to reachthe desired station.
8/20/2019 Ford Aerostar 1996 Owners Manual
41/347
38
Using the “SCAN” function
Pressing the “SCAN/TUNE” button onceenters the scan mode (display will indicate“SCN”). Pushing the right (a) side of the“SEEK” button will begin the scan mode upthe frequency band, stopping on eachlistenable station for approximately afive-second sampling. Pushing the left (b)side of the “SEEK” button will begin the scanmode down the frequency band, againstopping on each listenable station forapproximately a five-second sampling.
To stop the scan mode on the presentlysampled station, press the “SCAN/TUNE” button again.
Setting the Station Memory Preset buttons
Your radio is equipped with 5 stationmemory buttons. These buttons can be usedto select up to 5 preset AM stations and 10FM stations (5 in FM1 and 5 in FM2).
Follow the easy steps below to set these buttonsto the desired frequencies:
1. Select a band, then select a frequency.
2. Press one of the memory buttons and holdthe button until the sound returns. Thatstation is now held in memory on that button.
3. Follow the two steps above for each stationmemory preset button you want to set.
NOTE: If the vehicle’s battery is disconnected,the station memory preset buttons (ifprogrammed in auto mode) will needto be reset.
8/20/2019 Ford Aerostar 1996 Owners Manual
42/347
39
Using the Automatic Memory Load feature
You can activate the Auto Memory Loadfeature by pressing and holding the “AUTOPRESET” button for approximately threeseconds. Auto Memory Load sets all memory buttons in AM, FM1 and FM2 sequentially byseeking out the first five strong stations forthe respective band and storing them inmemory buttons 1-5. (FM2 will store thesecond set of strong stations from the FM band.)
With Auto Memory Store, you can continuallyset strong stations into your memory buttonswithout losing your existing memory presets,which is especially helpful while traveling. Yourradio will automatically set your memory buttons to the strong local stations so you don’thave to continually manually tune to existingstations.
Activate Auto Memory Store by pushing the“AUTO PRESET” button once. Your radio will
set the first five strong stations of the band youare in (AM, FM1 or FM2) into the memory buttons. The display will show “AUTO,” thenrun through the frequencies, stoppingmomentarily on the stations being set into thememory buttons. The radio is now in the“AUTO” mode and the display will show“AUTO” each time a preset is activated.
NOTE: If there are fewer than five strong
stations in the frequency band, theremaining unfilled buttons will storethe last strong station detected on theband.
After all stations have been filled, the radio will begin playing the station stored on memory button 1.
8/20/2019 Ford Aerostar 1996 Owners Manual
43/347
40
To deactivate the Auto Memory Store mode andreturn to the manually-set memory buttonstations (or those stations set using Auto
Memory Load), simply push the “AUTOPRESET” button. Display will show “AUTO”then “OFF.” The next time Auto Memory Storeis activated on that band, the radio will store thenext set of five strong stations.
Adjusting the tone balance and speaker o u tp u t o f y o u r r a d i o
Increasing or decreasing bass response
Push the “AUDIO” button repeatedly untilthe display reads “BASS.” Push the “+” sideof the “VOL” button to increase bass (more“lows”), and push the “-” side to decrease bass (less “lows”).
Increasing or decreasing treble response
Push the “AUDIO” button repeatedly untilthe display reads “TREB.” Push the “+” side
of the “VOL” button to increase treble (more“highs”), and push the “-” side to decreasetreble (less “highs”).
Adjusting speaker balance
Balance control allows you to adjust thesound distribution between the right and leftspeakers. Push the “AUDIO” buttonrepeatedly until the display reads “BAL.”Push the “+” side of the “VOL” button toshift the sound to the right speakers, andpush the “-” side to shift the sound to theleft speakers.
8/20/2019 Ford Aerostar 1996 Owners Manual
44/347
41
Adjusting speaker fader
Fade control allows you to adjust the sounddistribution between the front and rearspeakers. Push the “AUDIO” buttonrepeatedly until the display reads “FADE.”Push the “+” side of the “VOL” button toshift the sound to the front speakers, andpush the “-” side to shift the sound to therear speakers.
NOTE: Illuminated bars in the display showrelative levels of bass and treble andpositions of speaker balance and fader
functions after adjustments are made,then revert to volume level set.
Using the Controls of Your Cassette TapePlayer (If equipped)
H o w t o i n s e r t a t a p e
Your cassette tape player is equipped withpower loading. Once you insert a tape and push
slightly (with the open edge to the right), theloading mechanism draws the tape the rest of the way in and play will begin after amomentary tape tightening process. Displayindicates “M” (for metal/CrO
2) while tape is
playing.
NOTE: A cassette tape can be loaded with theignition on whether or not the radiopower is on.
8/20/2019 Ford Aerostar 1996 Owners Manual
45/347
42
H o w to l o ca te a d esi r ed tr a ck o n t h e ta p e
There are four ways to quickly locate a desiredselection on the tape. You can use the fastforward, rewind, “SEEK” or “SCAN” function.Following are brief descriptions of each.
Fast forwarding the tape
To fast forward the tape, press the “FF” button. The radio will automatically beginplaying until fast forward is manuallystopped. At the end of the tape, the directionautomatically reverses and plays the other
side of the tape.
Rewinding the tape
To rewind the tape, press the “REW” button.
The radio will automatically begin playinguntil rewind is manually stopped or the beginning of the tape is reached.
Using the “SEEK” function with your cassette
tape player
While in the tape mode, push the right aside of the “SEEK” button to seek forward tothe next selection on the tape. Push the left
b side to seek the previous tape selection.
NOTE: If you want to restart a currentlyplaying tape selection, press the leftbside of the “SEEK” button after
approximately three seconds into thecurrent selection.
8/20/2019 Ford Aerostar 1996 Owners Manual
46/347
43
Whirling sprockets in the displayl indicatethe direction of tape travel.
Using the “SCAN” function with your
cassette tape player
Press the “SCAN/TUNE” button to enter thescan mode (display indicates “SCN”).Pushing the right a side of the “SEEK” button will begin the forward scan mode onthe tape currently playing, stopping on eachtape selection for approximately aneight-second sampling.
Pushing the left b side of the “SEEK” button will begin the reverse scan mode,stopping on each previous tape selection forapproximately an eight-second sampling.While scanning, the display indicates whirlingsprockets plus an “S”m.
To stop the scan mode on the presentlysampled tape selection, press the“SCAN/TUNE” button again.
How to change the side of the tape beingplayed
The alternate track of the tape can be selectedanytime by pressing the “PLAY/PROG” button.
H o w to ej ect th e ta p e
To stop the tape and eject the cassette, press the
“EJCT” button. The radio will resume playing if the radio power is on. The tape cartridge can beejected with radio power (and/or ignition) on oroff.
8/20/2019 Ford Aerostar 1996 Owners Manual
47/347
44
H o w t o st o r e t h e t a p e
Press the “AM/FM” button to stop the tapeplayer and resume radio play. The cassette will
be stored in the tape player and the X symbolin the display will be lit until you push the“PLAY PROG” button to resume tape play. Fastforward and fast rewind can be used while thetape is in storage mode without interruptingradio play.
U s i n g th e D o l b y B noise reduction feature
NOTE: Noise reduction system manufactured
under license from Dolby LabsLicensing Corporation. “Dolby” anddouble-D symbol are trademarks ofDolby Laboratories LicensingCorporation.
Push thek button to activate. When on, thek symbol above the button will be lit.
Clock Operation
H o w to v i ew th e cl o ck m o de Press the “CLOCK” button to alternate thefrequency and time in the display. In the clockmode, pressing any radio function willautomatically display the radio frequency forapproximately ten seconds before changing backto the clock mode.
H o w to set th e cl o ck
1. Turn the radio on.2. Press and hold in the “CLOCK” button.
Press the “SEEK” button left (b) to advancethe hours and right (a) to advance theminutes.
NOTE: The clock displays 12-hour time withno AM/PM indications.
8/20/2019 Ford Aerostar 1996 Owners Manual
48/347
45
NOTE: On the High-Level Audio System, theclock can be set with the radio poweron or off.
Tape err or messages
Your cassette tape player is equipped todiagnose certain problems you may experience.Error codes are as follows:
Error 0 — Communication error between theradio controller and the tape controller. Thecassette player will eject the tape. Insert the tapeagain. If the same error code appears, turn theignition off, then back on again and insert thetape.
Error 1 — Possible problem cartridge. Thecassette tape player will eject the tape. Insert thetape again. If the same error code appears in thedisplay, try a different cartridge.
Error 2 — Tape eject or load failure. Yourcassette tape player will go into the pause mode.Push “EJCT” to eject the tape. If the tape doesn’t
eject, refer the problem to qualified personnel forservice.
Tips on Caring for the Cassette Player andTapes
In order to keep your cassette tape playerperforming the way it was meant to, read andfollow these simple precautions:
Using a Ford or equivalent cassette cleaningcartridge to clean the tape player head after10-12 hours of play will help maintain the best playback sound and proper tapeoperation.
Only cassettes that are 90 minutes long orless should be used. Tapes longer than 90minutes are thinner and subject to breakageor may jam the tape player mechanism.
8/20/2019 Ford Aerostar 1996 Owners Manual
49/347
46
Protect cassettes from exposure to directsunlight, high humidity and extreme heat orcold. If they are exposed to extremeconditions, allow them to reach a moderatetemperature before playing.
If a tape is loose inside the cassette, tighten it before playing by putting your finger or apencil into one of the holes and turning thehub until the tape is tight.
Loose labels on cassette tapes can becomelodged in the mechanism. Remove any looselabel material before inserting cassette.
Do not leave a tape in the cassette tapeplayer. High heat in the vehicle can cause thecassette to warp.
8/20/2019 Ford Aerostar 1996 Owners Manual
50/347
4 7
E l e c t r o n i
c S t e r e o R a d i o
8/20/2019 Ford Aerostar 1996 Owners Manual
51/347
4 8
E l e c t r o n i
c S t e r e o R a d i o w i t h C a s s e t t e
El t i St d St
8/20/2019 Ford Aerostar 1996 Owners Manual
52/347
49
Electronic Stereo and StereoCassette Radios
Using the Controls on Your New RadioHow to t une radio stat i ons (St ereo Radio)
There are three ways for you to tune in to aparticular station. You can manually locate thestation by using the “TUNE” button, “SEEK” thestation or select the station by using the memorypreset buttons, which you can set to any desiredfrequency.
How to t une radio st ati ons (St ereo Casset te Radio)
There are five ways for you to tune in to aparticular station. You can manually locate thestation by using the “Tune” button, AutomaticMusic Search (“AMS”), “SEEK” the station,“SCAN” to the station or select the station byusing the memory preset buttons, which you canset to any desired frequency.
Using the “TUNE” function (Stereo Radio)
You can change the frequency up or downone increment at a time by pressing andreleasing either the right (+) or left () sideof the “TUNE” button. To change frequenciesquickly, press and hold down either the rightor left side of the “TUNE” button.
Manual tuning adjusts your radio to anyallowable broadcast frequency, whether ornot a station is present on that frequency.(See All About Radio Frequencies in thissection.)
U i th “AMS” f ti t ll t
8/20/2019 Ford Aerostar 1996 Owners Manual
53/347
50
Using the “AMS” function to manually tuneyour radio (Stereo Cassette Radio)
You can change the frequency up or down
one increment at a time by first pressing the“AMS” button (display shows “TUNE”) thenwithin approximately five seconds pressingand releasing either the right (a) or left (b)side of the “SEEK” button. To changefrequencies quickly, press and hold downeither the right or left side of the “SEEK” button.
Using the “SEEK” function
Press the right (a) side of the “SEEK” button to select the next listenable station upthe frequency band. Press the left (b) side of the button to select the next listenable stationdown the frequency band. By holding the button down, listenable stations can bepassed over to reach the desired station.
Using the “SCAN” function (Stereo Cassette
Radio)Press the “SCAN” button to enter the scanmode. The radio will begin scanning up thefrequency band, stopping on each listenablestation for approximately a five-secondsampling. This continues until you press the“SCAN” button a second time.
Setting the Station Memory Preset buttons
Your radio is equipped with 5 stationmemory buttons. These buttons can be usedto select up to 5 preset AM stations and 10FM stations (5 in FM1 and 5 in FM2). Followthe easy steps below to set these buttons tothe desired frequencies.
1 Select a band then select a frequency
8/20/2019 Ford Aerostar 1996 Owners Manual
54/347
51
1. Select a band, then select a frequency.
2. Press one of the memory preset buttons andhold the button until the sound returns. That
station is now held in memory on that button.
3. Follow the two steps above for each stationmemory preset button you want to set.
NOTE: If the vehicle’s battery is disconnected,the clock and station memory presetbuttons (if programmed in auto mode)will need to be reset.
Using the Controls of Your Cassette TapePlayer (If equipped)
H o w t o i n s e r t a t a p e
Insert a cassette (with the open edge to theright) firmly into the tape door opening, makingsure the cassette is completely in and “seated.”
NOTE: A cassette tape can be loaded with theignition on whether or not the radio
power is on.H o w to l o ca te a d esi r ed tr a ck o n t h e ta p e
Using the Automatic Music Search (“AMS”)
Press and hold the “AMS” button (“AMS”will appear in the display). Then, push theleft (h) button to rewind to the beginningof the current selection or press the right(g) button to fast forward to the beginning
of the next selection.How to change the side of the tape being
played
The alternate track (other side) of the tapecan be selected at any time by pushing bothfast-wind buttons (h andg) at thesame time.
H o w to ej ect th e ta p e
8/20/2019 Ford Aerostar 1996 Owners Manual
55/347
52
H o w to ej ect th e ta p e
To stop the tape and eject the cassette, press the“i” button. The radio will resume playing.
U s i n g th e D o l b y B noise reduction feature
Push thek button to activate. Push again todeactivate.
NOTE: Noise reduction system manufacturedunder license from Dolby LabsLicensing Corporation. “Dolby” anddouble-D symbol are trademarks ofDolby Laboratories LicensingCorporation.
H o w to v i ew th e cl o ck m o de
Press the “CLOCK” button to alternate thefrequency and time in the display. In the clockmode, pressing any radio function willautomatically display the radio frequency forapproximately ten seconds before changing backto the clock mode.
H o w to set th e cl o ck
1. Turn the radio on.
2. Press and hold in the “CLOCK” button.Press the “SEEK” button left (b) to advancethe hours and right (a) to advance theminutes.
NOTE: The clock displays 12-hour time with
no AM/PM indications.
Tips on Caring for the Cassette Player and
8/20/2019 Ford Aerostar 1996 Owners Manual
56/347
53
ps o Ca g o t e Cassette aye a dTapes
In order to keep your cassette tape player
performing the way it was meant to, read andfollow these simple precautions:
Using a Ford or equivalent cassette cleaningcartridge to clean the tape player head after10-12 hours of play will help maintain the best playback sound and proper tapeoperation.
Only cassettes that are 90 minutes long or
less should be used. Tapes longer than 90minutes are thinner and subject to breakageor may jam the tape player mechanism.
Protect cassettes from exposure to directsunlight, high humidity and extreme heat orcold. If they are exposed to extremeconditions, allow them to reach a moderatetemperature before playing.
If a tape is loose inside the cassette, tighten it before playing by putting your finger or apencil into one of the holes and turning thehub until the tape is tight.
Loose labels on cassette tapes can becomelodged in the mechanism. Remove any looselabel material before inserting a cassette.
Do not leave a tape in the cassette tapeplayer when not in use. High heat in the
vehicle can cause the cassette to warp.
Rear Seat Radio Controls
8/20/2019 Ford Aerostar 1996 Owners Manual
57/347
54
Rear Seat Radio Controls
Using the Rear Seat Radio Controls
Rear seat radio controls are available on someAerostar models.
The rear seat radio controls are located behindthe driver on the left hand side of the vehicle.These controls duplicate several radio functionsof the radio and allow the use of headphones inthe vehicle.
Rear seat radio controls
H o w to tu r n th e r ea r s ea t r a di o co n tr o l s o n and off
Press memory preset buttons “1” and “3”simultaneously on the face of your radio to turnthe rear seat radio controls on. A headphonessymbol (j) will appear in the display when therear seat controls are on. Press “1” and “3”
simultaneously again to turn the rear seat radiocontrols off.
H o w t o a dj u st t h e v ol u m e
Press the right (+) side of the “VOLUME” rockerswitch to increase volume; and push the left ()side to decrease the volume of the rear speakers.
NOTE: Rear seat control volume can be set no
8/20/2019 Ford Aerostar 1996 Owners Manual
58/347
55
higher than current radio setting unlessspeakers are turned off. See note underHow t o t urn t he speakers on and of f .
Sett ing t he AM or FM frequency band
Push the “BAND” button to change thefrequency band.
Using t he “M EM ORY” butt on
Push the “MEMORY” button to access thestation you have set into memory button 1 onthe face of the radio. Successively pushing this
button will access, numerically, all stations setinto the Station Memory Preset buttons (1through 5).
H o w to tu r n th e sp ea k er s o n a n d o ff
When the rear seat controls are on, push the“SPKRS ON-OFF” button to turn all speakersoff. Push again to turn all speakers on.
NOTE: Turning the ignition off then on again
will not turn the speakers back on, ifpreviously turned off by the “SPKRSON-OFF” button on the rear seatcontrols.
U sing t he “SEEK” f uncti on
Press the right (a) side of the “SEEK” rockerswitch to seek to the next radio station. Press theleft (b) side of the “SEEK” rocker switch toseek to the previous radio station.
NOTE: When using the rear seat controls witha High-Level Audio System, the“SEEK” function on the rear seatcontrols will also function withcassettes, seeking the next (“SEEK a”)or previous (“b SEEK”) selection onthe tape.
U si ng headphones w i t h t he rear seat
8/20/2019 Ford Aerostar 1996 Owners Manual
59/347
56
controls
Two 3.5 mm headphone jacks have been
provided on the rear seat controls. Plugheadphone(s) into the provided jack(s) tooperate.
Common Radio ReceptionConditions
Several conditions prevent FM reception from being completely clear and noise-free, such asthe following:
1. Distance/Strength
The strength of the FM signal is directly relatedto the distance the signal must travel. Thelistenable range of an average FM signal isapproximately 25 miles (40 kilometers). Beyondthis distance, the radio is operating in a fringearea and the signal becomes weaker.
NOTE: Always make sure your antenna(whether you have a power antenna ora manually adjustable antenna) is fullyextended to its maximum length forproper reception. If your antenna is notfully extended, you may experiencesignal loss while traveling in fringereception areas.
2. Terrain
The terrain (hilly, mountainous, tall buildings) of the area over which the signal travels mayprevent the FM signal from being noise-free.
If there is a building or large structure betweenthe antenna and station, some of the signal“bends” around the building, but certain spotsreceive almost no signal. Moving out of the
“shadow” of the structure will allow the stationt t t l
8/20/2019 Ford Aerostar 1996 Owners Manual
60/347
57
to return to normal.
When the radio waves are reflected off objects or
structures, the reflected signal cancels the normalsignal, causing the antenna to pick up noise anddistortion. Cancellation effects are mostprominent in metropolitan areas, but also can become quite severe in hilly terrain anddepressed roadways.
To minimize these conditions, a stereo/mono blend circuit has been incorporated into thissystem. This feature automatically switches a
weak stereo signal to a clearer monaural signal,which improves the quality of reception.
Several sources of static are normal conditionson AM frequencies. These can be caused bypower lines, electric fences, traffic lights andthunderstorms.
Another reception phenomenon is Strong SignalCapture and Overload. This can occur when
listening to a weak station and when passinganother broadcast tower. The close station maycapture the more distant station, although thedisplayed frequency does not change. Whilepassing the tower, the station may switch backand forth a few times before returning to theoriginal station.
When several broadcast towers are present(common in metropolitan areas), several stationsmay overload the receiver, resulting inconsiderable station changing, mixing anddistortion.
Automatic gain control circuitry for both AMand FM bands has been incorporated into thissystem to reduce strong signal capture andoverload.
All About Radio Frequencies
8/20/2019 Ford Aerostar 1996 Owners Manual
61/347
58
The Federal Communications Commission (FCC)and the Canadian Radio Telecommunications
Commission (CRTC) establish the frequenciesthat AM and FM radio stations may use fortheir broadcasts. The allowable frequencies are,AM: 530, 540...1600, 1610 kHz in 10 kHz steps;FM: 87.9, 88.1...107.7, 107.9 MHz in 0.2 MHzsteps.
Not all frequencies will be assigned to a givenarea. This radio will tune to each of thesefrequencies using manual tune and no finetuning is necessary as radio stations may not use
other frequencies.Some FM radio stations advertise a“rounded-off” frequency which is not thefrequency they actually broadcast on. Forexample, a radio station that is assigned afrequency of 98.7 MHz may call itself “Radio 99”even though 99.0 MHz is not an allowable FM broadcast frequency.
Important Warranty and ServiceInformationWarranty
Your sound system is warranted for three yearsor 36,000 miles (60,000 kilometers), whichevercomes first. Consult your vehicle warranty booklet for further information. Ask your dealerfor a copy of this limited warranty.
Service
At Ford, we stand behind our audio systemswith a comprehensive service and repairprogram. If anything should go wrong withyour Ford audio system, return to your dealerfor service. There is a nationwide network of qualified Ford authorized repair centers to assistyou.
Controls and Features
8/20/2019 Ford Aerostar 1996 Owners Manual
62/347
59
Controls and Features
The main controls for the climate control system,clock, and radio are on the instrument panel.
6 0
I n s t
8/20/2019 Ford Aerostar 1996 Owners Manual
63/347
t r u m e n
t p a n e l a n d c o n t r o l s
NOTE: Any cleaner or polish that increases thegloss (shine) of the upper part of the
8/20/2019 Ford Aerostar 1996 Owners Manual
64/347
61
g pp pinstrument panel should be avoided.The dull finish in this area is to help
protect the driver from undesirablewindshield reflection.
The Climate Control Systems
Your vehicle is equipped with a controlassembly designed to handle either acombination A/C-Heater System or aHeater-Only System.
If your vehicle has a factory installed auxiliary
system, the front control will be equipped with arear fan control switch. If it is a factory installedauxiliary system with rear A/C and/or rearheater functions, an auxiliary fan speed controlswitch is installed in the rear of the vehicle.
Instrument Panel Registers
There are four registers in the instrument panel.Each of these registers contains a louver
assembly which can be manually adjusted todirect airflow up, down, left and right. Anillustration of the register locations follows.
Instrument panel registers
Air Conditioner and Heater (If equipped)
The control for your air conditioner and heater
8/20/2019 Ford Aerostar 1996 Owners Manual
65/347
62
The control for your air conditioner and heatersystem is located near the center of theinstrument panel and operates only when theignition key is turned to the ON position. Yourair conditioner and heater heats or cools yourvehicle interior depending on the function andthe temperature you select. The right knob is theSELECT knob which allows you to select heatingor cooling and determine where the air will bedirected. The TEMP knob setting determines thetemperature of the air that flows into thevehicle.
Climate control knobs
To turn your air conditioner and heater systemon, rotate the SELECT knob to any positionexcept OFF. This will turn the fan on and allowsairflow into the vehicle.
Temperat ure sel ecti on
The TEMP knob is the rotating knob located at
the center of the control with tapered red and blue bands surrounding most of the knob. Thewide red part of the band (full right) is the heatarea. The wide blue area (full left) is the coolingtemperature area. Any position selected betweenfull right and full left will give a temperature between the two extremes except in MAX A/C.
Fan speed adjustment
The left knob or upper left knob with the x is
8/20/2019 Ford Aerostar 1996 Owners Manual
66/347
63
The left knob or upper left knob with the x isthe fan speed knob. Rotate the x knob to the
right to increase fan speed and increase theamount of air entering the vehicle. Four fanspeed positions are available.
Funct i on sel ecti on
Use VENT to bring outside air through theinstrument panel registers. You can heat the airin this position by rotating the center knob intothe red area. The air cannot be cooled below theoutside temperature regardless of the TEMP
knob setting.Select NORM A/C to get refrigerated outside airthrough the instrument panel registers. TheNORM A/C position is used for cooling exceptwhen it is extremely hot or fast cooling of thevehicle is needed. Select MAX A/C for fastcooling and return to NORM A/C when you arecomfortable.
The MAX A/C position rapidly produces cool
air to provide faster cooling of your vehicle. Thisis possible because cooler air is drawn frominside the passenger area and cooled againinstead of using warmer outside air. Use of inside air makes the fan sound louder and isnormal when using MAX A/C. You cannotadjust the air temperature when operating inMAX A/C. If the airflow is too cold, selectNORM A/C and adjust the air temperature asdesired.
Airflow will be to the floor when FLR isselected. The air cannot be cooled in the FLRposition but can be heated by rotating the TEMPknob into the red area.
Select MIX to direct air to the floor andwindshield defrosters at the same time. If the
t id t t i b t 50˚F (9˚C)
8/20/2019 Ford Aerostar 1996 Owners Manual
67/347
64
outside temperature is about 50 F (9 C) orwarmer, the air will also be dehumidified to
remove moisture. This feature will help preventfogging in humid weather. The air can be cooledor heated.
SelectV to obtain maximum airflow to thewindshield. Rotate the TEMP knob into the redarea for the air temperature required to defrost.When the outside temperature is about 50˚F(9˚C) or warmer, the air will be dehumidified toremove moisture. Rotate the x knob on the left
to increase the airflow.Oper ating Tips
The following tips help you get the mostsatisfaction from your air conditioner and heatersystem:
In humid weather, selectV before startingyour engine. This helps prevent windshieldfogging. After a few minutes of operation,
you may select another airflow position.To prevent humidity buildup inside your
vehicle, always drive with the air conditionerand heater system turned on.
Do not put objects under the front seats thatinterfere with the flow of air to the back seatarea.
Remove any snow, ice, or leaves from the air
intake area at the bottom of the windshield.For maximum heating, rotate the function
selector knob to FLR, the temperature controlknob to the red (warm) range, and the fanknob to HI.
Standard Heater
The control for your heater system is located
8/20/2019 Ford Aerostar 1996 Owners Manual
68/347
65
y ynear the center of the instrument panel and
operates only when the ignition key is turned tothe ON position. The heater heats and/orventilates your vehicle interior depending on thefunction and temperature you select. The rightknob is the SELECT knob which allows you toselect heating or ventilation and determinewhere the air will be directed. The TEMP knobsetting determines the temperature of the airthat flows into the vehicle.
Climate control knobs (heater only)
To turn the heater system on, rotate the SELECTknob to any position except OFF. This turns onthe fan and allows airflow into the vehicle
8/20/2019 Ford Aerostar 1996 Owners Manual
69/347
66
the fan and allows airflow into the vehicle.
Temperat ure sel ecti on
The TEMP knob is the rotating knob located atthe center of the control with tapered red and blue bands surrounding most of the knob. Thewide red part of the band (full right) is the heatarea. The wide blue area (full left) is the coolarea. Any position selected between full rightand full left will give a temperature between thetwo extremes. The cool temperature you selectwill not be cooler than the outside temperature.
Fan speed adjustment
The left knob or upper left knob with the x isthe fan speed knob. Rotate the x knob to theright to increase fan speed and increase theamount of air entering the vehicle. Four fanspeed positions are available.
Funct i on sel ecti on
Use VENT to bring outside air through theinstrument panel registers. You can heat the airin this position by rotating the TEMP knob intothe red area. The air cannot be cooled below theoutside temperature regardless of the TEMPknob setting.
Airflow will be to the floor when FLR isselected. The air can be heated by rotating thetemperature knob into the red area.
Select MIX to get air to the floor and windshielddefrosters at the same time.
SelectV to obtain maximum airflow to thewindshield. Rotate the TEMP knob into the redarea for the air temperature required to defrost.Rotate the x knob to increase or decrease theairflow.
Oper ating Tips
The following tips will help you to get the mosti f i f h
8/20/2019 Ford Aerostar 1996 Owners Manual
70/347
67
satisfaction from your heater system.
In humid weather, selectV before startingyour engine. This will help to preventwindshield fogging. After a few minutes, youmay select another airflow position.
To prevent humidity buildup inside yourvehicle, always drive with the heater systemturned on.
Do not put objects under the front seats thatinterfere with the flow of air to the back seatarea.
Remove any snow, ice, or leaves from the airintake area at the bottom of the windshield.
For maximum heating, rotate the functionselector knob to FLR, the temperature controlknob to the red (warm) range, and the fan blower knob to HI.
Auxiliary Heater and AirConditioner (If equipped)
If your vehicle is equipped with a factoryinstalled auxiliary unit (heater or heater/airconditioner), the front control assembly willinclude separate switches for FRONT and REARfan control. Fan speed for front and rear systemscan be set as desired by adjusting these switches.
8/20/2019 Ford Aerostar 1996 Owners Manual
71/347
68
Front control assembly with rear blower knob
In addition, an auxiliary unit fan switch islocated on the left side of the vehicle in linewith the second row of seats.
To control the auxiliary unit fan speed with thisswitch, the rear fan switch on the front controlmust first be set at the REAR CONT (control)position.
Rear mounted auxiliary fan switch
Rear Window Defroster(If equipped)
8/20/2019 Ford Aerostar 1996 Owners Manual
72/347
69
The defroster for the rear window clears frost,
fog, or thin ice from both the inside and outsideof the rear window.
The control switch is located on the instrumentpanel to the right of the steering column.
Rear window defroster switch
To defrost the rear window:
1. Clear any snow or ice from the rearwindow.
2. Get in your vehicle and start the engine.
3. Press the switch. The indicator light will turnon.
The defroster turns off automatically afterapproximately 10 minutes. If the window is notclear, turn on the defroster again. It will also
automatically shut off any time the engine isshut off.
NOTE: Never use sharp instruments orwindow cleaners with abrasives toclean the inside of your rear window.
f d d h h
8/20/2019 Ford Aerostar 1996 Owners Manual
73/347
70
If you do, you may damage the heating
elements that are bonded to the insideof the rear window and cause damageto the rear window defroster.
Rear Window Wiper andWasher (If equipped)
The rear window wiper control switch is locatedon the instrument panel to the right of thesteering column.
To wash and wipe the rear window:
1. Push the top of the switch to turn on thewipers.
2. Push and hold the WASH control switch fora constant spray.
3. Release to the outer position. The spray willstop and the wipers will remain running.
4. Push the top of the switch to stop thewipers.
Rear window wiper/washer control button
The Interior and Exterior Lights
Turning On the Exterior Lights
8/20/2019 Ford Aerostar 1996 Owners Manual
74/347
71
To turn on your headlamps, parking lamps,
marker lamps, license plate lamps and taillamps, use the headlamp switch to the left of thesteering column.
Master lighting switch
Daytime Running Light System
(Canadian vehicles only)
The Da time Running Light (DRL) s stem turns
8/20/2019 Ford Aerostar 1996 Owners Manual
75/347
72
The Daytime Running Light (DRL) system turns
the high beam headlamps on, with a reducedlight output, when:
The headlamp system is in the OFF position,and
The vehicle is running, and
The vehicle has a fully released parking brake.
NOTE: You may notice that the lights flickerwhen the vehicle is turned on or off.This is a normal condition.
RWARNING
The Daytime Running Light (DRL) systemwill not illuminate the tail lamps andparking lamps. Turn on your headlampsat dusk. Failure to do so may result in acollision.
Instrument Panel Illumination
The instrument panel lights can be turned on bypulling the headlamp switch toward you toeither the first or outer position. You can brighten or dim the instrument panel lights byrotating the headlamp switch knob.
High-mount Brakelamp
The high-mount brakelamp is located above therear window on liftgate models, and on the roof above the rear doors on dual rear door models.
8/20/2019 Ford Aerostar 1996 Owners Manual
76/347
73
High-mount brakelamp
Illuminated Entry System (If equipped)
If your vehicle is equipped with this option, theinterior courtesy lamps and dome lamp willlight when either outside front door handle israised. They will turn off automatically afterapproximately 25 seconds or when the ignitionkey is turned to ON or ACC.
Radio
For information about the radio in your vehicle,refer to the Electronic Sound Systems chapter inthis Owner Guide.
Clock Controls on ElectronicRadios
The electronic radios have a built-in clock For
8/20/2019 Ford Aerostar 1996 Owners Manual
77/347
74
The electronic radios have a built in clock. For
complete operating instructions, refer to theElectronic Sound Systems chapter in this OwnerGuide.
Ignition
Understanding the Positions of the Ignition
The positions of the key in the ignition lock cylinder.
ACCESSORY allows some of your vehicle’selectrical accessories such as the radio and thewindshield wipers to operate while the engine is
not running.
LOCK locks the steering wheel and gearshiftlever.
LOCK is the only position that allows you toremove the key. The LOCK feature helps toprotect your vehicle from theft.
If your key is stuck in the LOCK position andwill not turn, move your steering wheel left or
right until the key turns freely.OFF allows you to shut off the engine and allaccessories without locking the steering wheel orthe automatic transmission gearshift lever.
ON allows you to test your vehicle’s warninglights (except the brake system warning light) to
make sure they work before you start theengine. The key returns to the ON position oncethe engine is started and remains in this positionwhile the engine runs.
8/20/2019 Ford Aerostar 1996 Owners Manual
78/347
75
g
START cranks the engine. Release the key oncethe engine starts so that you do not damage thestarter. The key should return to ON when yourelease it. The START position also allows youto test the brake warning light.
The Turn Signal Lever
You can use the turn signal lever on the left sideof the steering column to:
operate the turn signals and cornering lamps
turn the high beams on/off
flash the lamps
turn the windshield wipers and washeron/off
Turn Signals
Turn signal operation
If the turn indicator light in the instrumentpanel does not illuminate or remains on (doesn’tflash) when you signal a turn, the turn signalingsystem is malfunctioning. Have this condition
corrected as soon as possible, but make sure thatyou use the accepted hand signals in themeantime.
High Beams and Flashing the Lamps
8/20/2019 Ford Aerostar 1996 Owners Manual
79/347
76
High Beams and Flashing the Lamps
Headlamp high beam and flash-to-pass operation
Windshield Wipers and Washer
To turn on the windshield wipers, the ignitionkey must be turned to the ON or ACC position.
Interval wiper on turn signal lever — wiper and washeroperation
To set the interval wipers, rotate the knob at theend of the turn signal lever toward or awayfrom the instrument panel to the intervaloperation you desire.
To clean the windshield, push in the end of thewiper knob. For a constant spray, keep the knobpushed in. After you release the knob, thewipers operate for two to three cycles before
8/20/2019 Ford Aerostar 1996 Owners Manual
80/347
77
turning off (if wipers were off) or returning tothe selected setting.
NOTE: The addition of bug shields to thefront of the vehicle (e.g., shields) mayadversely affect the windshield washersystem from delivering fluid to thewindshield. Devices such as shields arenot recommended for your Fordvehicle.
Do not try to clean the windshield when thewasher fluid container is empty or activate thewashers at any time for more than 15 secondscontinuously. This could damage the washerpump system.
RWARNING
Always warm up the windshield with thedefroster before you use the washer fluid.
In freezing weather, the washer solutionmay freeze on the windshield and obscureyour vision.
For information about refilling the washer fluidor replacing your windshield wiper blades, seeWindshield washer fluid and Wipers in the Index.
Gearshift Lever
The gearshift lever on your Aerostar is mounted
on the steering column. On the end of thegearshift lever is the OVERDRIVE OFF button.For additional information about the gearshiftlever and the OVERDRIVE OFF button, see theDriving chapter.
8/20/2019 Ford Aerostar 1996 Owners Manual
81/347
78
Overdrive off button
OVERDRIVE OFF Light on Gearshift
LeverThis light indicates the operating range of thetransmission. The word OFF illuminates on thelever when the OVERDRIVE OFF button isdepressed.
Hazard Flasher Switch
The hazard flasher switch is located on the topof the steering column. For more information,
refer to Hazard Flasher in the Roadside Emergencieschapter.
Hazard flasher
Tilt Steering (If equipped)
RWARNING
Never adjust the steering wheel when the
8/20/2019 Ford Aerostar 1996 Owners Manual
82/347
79
Never adjust the steering wheel when thevehicle is moving.
Turn signal and tilt steering release lever
To change the position of the steering wheel,pull the release lever on the column toward you.Tip the steering wheel to the desired position.Release the lever to lock the steering wheel in
place.Be sure the steering wheel locks in a notch. It isnot infinitely adjustable. Do not adjust thesteering wheel while the vehicle is in motion.
Speed Control (If equipped)
8/20/2019 Ford Aerostar 1996 Owners Manual
83/347
80
Speed control switches on the steering wheel
To Turn Speed Control Off
Press OFF
OR
Turn off the vehicle ignition.
Once speed control is switched off, thepreviously programmed set speed will be erased.
To Turn Speed Control OnPress ON
To Set A Speed
Press the SET ACCEL. For speed control tooperate, the spee
Top Related