Our Company, Pcatt Pte Ltd was founded in 1996. It is incorporated
in Singapore. We are a chemical manufacturing / trading office with
plant both locally and in China. We are also represented in most of
the South East Asia country, namely Thailand, Philippines,
Indonesia, Malaysia, Taiwan.
We also represent several manufacturers from US and Japan dealing in
clean room products for use in the electronic industry. The trend is for
customers to reduce their number of supplier and since we have been
servicing most of the customer for a long time,
About Pcatt Pte Ltd
Wiper Rolls Singapore
Cleanroll Singapore
Cleanroll Wipes
Foaming Stone
Solder paste Singapore
Solder Paste and Bar
Solder Dross Converter
Solvent Cleaners Singapore
Cleanpen Solvent pen
Content…. Solder Saver Machine
Rubber Squeegee Material
Clean Roll Stencil Wipe
Polyimide Tape Manufacturers
Polyimide Tape Suppliers
Gold Pen Base
Production Indirect Material
Clean room Products Singapore
Soldering Material and Chemical
Wiper Rolls
CleanRoll Wipes have been developed
to support the high standards necessary
in the electronics industry. This wipe is
effective in cleaning under stencils
between prints because of its super
absorbency;
extremely low shredding and particle generation, purity and resistance to
tearing. This specially blended non-woven structure wipes are soft and
tough and will not scratch surfaces when used wet or dry.
CleanRoll Stencil Wipe
We offer a comprehensive range of
under stencil wipe that are made of
high absorptive material with
superior capillary action and
cleaning properties. These wipe are
low in lint and resist tearing and
shredding.
Polymide Tape
Carbide diamond cut geometry for
general purpose routing of
multilayer PWB’s. Excellent for
internal slotting or external
fabrication. Medium cut design is
optimized for a combination of production speed, edge finish,
and tool life. A more aggressive geometry than our Series 24.
Gold Pen Base
TNEWNINAL makes it easy for you to
electroplate safely and quickly with our
new PEN PLATING SYSTEM. Using
disposable pens, the NEWNINAL
PLATING SYSTEM is perfect for
ELECTRONIC PARTS, PCBS,
OPTICAL FRAMES, JEWELRY, ORNAMENTS, ACCESSORIES,
SMALL PARTS and any item that requires a new finish.
CleanWipeCleanWipe are pre cut flat
dry wipe for all-purpose
cleaning application. The
strong, super absorbent
CleanWipe are low in lint,
resist tearing and shredding.
CleanWipe traps dirt,
grease, solder paste, flux
residue and
other contaminate particles. Available in standard
size of 4 and 9 inches square and pack in 300
pieces/bag.
PCATT PTE LTD
Address:- 27 Woodlands Industrial Park
E1 #04-11 Hiang Kie Industrial Building Singapore 757718
Tel :+65 67607548/67663825
Fax :+65 64651961
Email :[email protected] / [email protected]
Top Related