Dry Powder Fire Extinguishers
PRODUCT DESCRIPTIONNAFFCO stored pressure type dry powder extinguishers are characterised by their high performance, simple method of operation and rapid fire knock down capability. They are suitable for tackling fires involving freely burning materials, petrol, oil, gas and electrical equipment. They are ideal for vehicle & marine risks. NAFFCO ABC powder extinguishers contain high performance powder and are one of the most powerful powder extinguishers in the world.
FEATURES
Ideal Use: Houses, office, buildings, warehouses, farms, wood working area etc.Note: Not recommended for use on expensive and delicate equipment like computers, etc.
*High Fire Rating Using Special ABC Powder
Monoammonium phosphate based dry chemical agent. Capable of fighting Class A, B, C and E fires
Kitemark certied to BS EN3 Cylinders compliance to council directive
97/23/EC (PED) and Statutory instrument 1999 No.2001 is certified by BSI (0086)
Certified by BSI under marine equipment directive
High quality polyster paint Controlled discharge Brass nickel plated head valve with simple
squeeze operation Unique gauge testing system Unique colour coded handle and base
(Optional) Rechargeable and easy to service Choice of capacity from 1 to 12 Kg
MODEL NUMBERExtinguisher CapacityPropellantFire Rating
Maximum Operating PressureWorking Pressure
Test PressureTotal WeightRange of Discharge
Hose Length with NozzleDuration of Discharge
Operating TemperatureCylinder Material
NP1 NP22kg
13A 70B14 Bar
3.7kg5-7m
10-12 secN/A
1kg
8A 34B14 Bar
1.8kg4-5m
7-9 secN/A
NP33kg
21A 89B14 Bar
5.8kg6-7m
11-12 sec395mm
NP44kg
21A 113B15 Bar16.5 Bar @ 60C
-20C to +60CCRCA Steel Sheet
7.5kg7-8m
13-15 sec457mm
NP66kg
34A 183B15 Bar
10 kg6-8m
18-20 sec534mm
NP66kg
43A 233B*15 Bar
14 kg7-8m
20-22 sec534mm
NP99kg
43A 233B15 Bar
14 kg6-8m
22-24 sec524mm
NP1212kg
55A 233B15 Bar
30 Bar17.8 kg6-8m
28-30 sec617mm
1. Valve / Extn. Lever2. Safety Pin with Chain3. Valve Handle4. Pressure Gauge5. Discharge Hose6. Syphon Tube7. Hose Holder8. Discharge Nozzle9. PVC Base
Height x Diameter (in mm) 385 x 110337 x 78 420 x 132 408 x 150 520 x 150 520 x 150 515 x 185 620 x 185
95% Nitrogen + 5% Helium
Wet Chemical Fire Extinguishers
PRODUCT DESCRIPTIONNAFFCO stored pressure type wet chemical extinguishers are used for cooking oil or fat res where the pray gives almost immediate ame. Extinguishment happens while the wet chemical agent reacts with oil to form a soap like lm to seal the surface of the oil and cool it down to prevent re-ignition.
Suitable for Class A re risks.
FEATURES Water, a liquid agent only recommended for
ghting Class A Fire. Kitemark certied to BS 7937:2000 and BSEN3 Cylinders compliance to council directive
97/23/EC (PED) and Statutory instrument 1999 No.2001 is certied by BSI (0086)
Certied by BSI under marine equipment directive
High quality polyster paint
Thermoplastic internal coating to prevent corrosion
Fire mist spray to prevent grease splashing Brass nickel chrome plated head valve with
simple squeeze operation Unique gauge testing system Unique colour code handle and base (Optional) Rechargeable and easy to service Passed 35KV electrical conductivity test
1. Valve / Extn. Lever2. Discharge Hose3. Safety Pin with Chain4. Valve Handle5. Pressure Gauge6. Hose Holder7. Syphon Tube8. PVC Internal Coating9. Filter10. Discharge Nozzle11. PVC Base
Ideal Use: Commercial kitchens in connection with NAFFCO Pre-engineered Hood SystemsCaution: Dont use on electrical re
MODEL NUMBERExtinguisher CapacityPropellant
NKE 3X*NKE 2* NKE 63ltr2ltr
95% Nitrogen + 5% Helium6ltr
Fire Rating
Maximum Operating PressureWorking Pressure
Test PressureTotal WeightRange of Discharge
Hose Length with NozzleDuration of Discharge
Operating Temperature
8A 25F5F10 Bar10 Bar
11.5 Bar @ 60C11.5 Bar @ 60C30 Bar30 Bar7.2kg4.4kg1m1m
30-35 sec40-45 sec610mmN/A
0C to +60C0C to +60C
13A 75F10 Bar
11.5 Bar @ 60C30 Bar12.5kg
1m50-55 sec610mm
0C to +60CHeight x Diameter (in mm) 505 x 185420 x 110 420 x 1324*LPCB approval only
Cabinets for Fire Hose Reel, Fire Equipmentsand Breeching Inlet
PRODUCT DESCRIPTIONNAFFCO cabinets are designed to accommodate re hose reel, re ghting equipment and breeching inlet. Fire hose reel cabinets are manufactured to comply with BSEN 671-1 standard and breeching inlet cabinets are manufactured to comply to BS 5041-5 standard.
FEATURES LPCB Certied Cabinet material made of Electro
Galvanized sheet or Stainless Steel Sheet (Full stainless steel brush or mirror nish)
Locking of cabinet is either key operated or round handle cam latch
Cabinets are available either in surface mounted
or recessed mounted type Cabinet door shall be solid door or glass door
(Clear glass or wired glass) Breeching inlet cabinets are available in
horizontal or vertical version
CABINETS
6x4 Way Breeching Inlet
PRODUCT DESCRIPTIONNAFFCO breeching inlets are suitable for installation on dry risers only, in a building for re ghting purposes, tted with inlet connection at re brigade access level and outlet connection at specied points, which is normally dry but capable of being charged with water by pumping from re service appliances.
The breeching inlets are manufactured to comply to BS 5041 PART-3:1975 standard comprising of male instantaneous connections complying with BS 336:2010, drain valves complying with BS 5154, PN16 rated and non-return valves.
The breeching inlets and its ttings are suitable for a normal working pressure of 10 bar and for working temperature range from 0C to 38C.
FEATURES BSI Kitemark & LPCB certied Body material made of spheroidal graphite iron
to BS 1563:1997 Inlet connection and non-return valves material
made of copper alloy to BS 12163:1998
Each inlet connection is tted with non-return valve and of spring loaded mushroom type
Each breeching inlet is painted RED internally and externally
BILL OF MATERIAL
NDR095
Description
4 Nos. Male Instantaneous Connector Complying to BS 336
Body
Normal Working Pressure of 10 Bar150 mm Flanged Outlet
20 BarBS 4504 Part : 2 : 1974 Table : 16/21
Inlet Connection & Non-Return ValvesDrain Valve
Blank Cap for Drain ValveBlank Cap for Inlet Connector
MODEL
S. No.
Inlet Connection
12
Pressure Rating
Nominal Size
Test Pressure
Flange Drilling
345
MaterialSpheroidal Graphite Cast Iron to BS EN 1563:1997
Copper Alloy to BS EN 12163:1998Copper Alloy to BS EN 12163:1998Copper Alloy to BS EN 12163:1998
Plastic
front-coverpage 02page 03page 04Page 05page 06page 07Page 08page 09page 10page 11page 12page 13page 14page 15page 16page 17page 18page 19page 20page 21page 22page 23page 24page 25page 26page 27page 28page 29page 30page 31page 32page 33back cover
Top Related