IndustrialIT800xA - System
800xA for Advant MasterSystem Version 4.0
Extended Graphic Library
Extended Graphic Library
IndustrialIT800xA - System
800xA for Advant MasterSystem Version 4.0
NOTICEThe information in this document is subject to change without notice and should not beconstrued as a commitment by ABB. ABB assumes no responsibility for any errors thatmay appear in this document.
In no event shall ABB be liable for direct, indirect, special, incidental or consequentialdamages of any nature or kind arising from the use of this document, nor shall ABB beliable for incidental or consequential damages arising from use of any software or hard-ware described in this document.
This document and parts thereof must not be reproduced or copied without written per-mission from ABB, and the contents thereof must not be imparted to a third party nor usedfor any unauthorized purpose.
The software or hardware described in this document is furnished under a license andmay be used, copied, or disclosed only in accordance with the terms of such license.
This product meets the requirements specified in EMC Directive 89/336/EEC and in LowVoltage Directive 72/23/EEC.
Copyright © 2003 - 2004 by ABB. All rights reserved. Release: October 2004Document number: 3BSE026427R4001
TRADEMARKSRegistrations and trademarks used in this document include:
Process Portal A Trademark of ABB Ltd., Switzerland.
Microsoft Registered trademark of Microsoft Corporation.
Windows Registered trademark of Microsoft Corporation.
Windows 2000 and MS-DOS Registered trademarks of Microsoft Corporation.
ActiveX and Visual Basic Registered trademarks of Microsoft Corporation.
PostScript Registered trademark of Adobe Systems Inc.
Acrobat Reader Registered trademark of Adobe Systems Inc.
Ghost Registered trademark of Symantec Corporation.
Industrial IT Trademark of ABB.
TABLE OF CONTENTS
About This BookGeneral ..............................................................................................................................9
Use of Warning, Caution, Information, and Tip Icons ....................................................11
Document Conventions ...................................................................................................12
Terminology.....................................................................................................................13
Related Documentation ...................................................................................................14
Section 1 - Extended Graphic ElementsAnalog Input, AI..............................................................................................................15
Integer Bargraph01...............................................................................................15
Integer Limit01.....................................................................................................18
Integer Percent01..................................................................................................20
Analog Output, AO..........................................................................................................22
Integer Button01...................................................................................................22
Binary Object, GENBIN .................................................................................................23
3-Valve01 .............................................................................................................23
3-Valve Long LLD01 (Left-Left-Down)..............................................................26
3-Valve Long LRD01 (Left-Right-Down) ...........................................................29
Breaker01 .............................................................................................................32
Choke Valve01 .....................................................................................................35
Damper01.............................................................................................................38
Fan01 .............................................................................................................41
Mixer01 .............................................................................................................44
Motor01 .............................................................................................................47
Pump01 .............................................................................................................50
Valve01 .............................................................................................................53
3BSE026427R4001 5
Table of Contents
Data Base Parameters, DAT(x)........................................................................................ 56
Square01 ............................................................................................................ 56
Digital Input, DI .............................................................................................................. 57
Arrow01 ............................................................................................................ 57
Breaker01 ............................................................................................................ 59
Damper01 ............................................................................................................ 61
Diamond01........................................................................................................... 63
Earth01 ............................................................................................................ 65
Fan01 ............................................................................................................ 67
IndicatorText01 .................................................................................................... 69
IndicatorText02 .................................................................................................... 71
IndicatorText03 .................................................................................................... 73
Motor01 ............................................................................................................ 75
Pump01 ............................................................................................................ 77
Reg Loop01.......................................................................................................... 79
Valve01 ............................................................................................................ 81
Digital Output, DO.......................................................................................................... 83
Diamond01........................................................................................................... 83
Reg Loop01.......................................................................................................... 85
Reg Loop02.......................................................................................................... 87
Square01 ............................................................................................................ 89
Valve01 ............................................................................................................ 91
Motor Control, MOTCON .............................................................................................. 93
Fan01 ............................................................................................................ 93
Pump01 ............................................................................................................ 96
Process Controller, PIDCON .......................................................................................... 98
Integer Limit01 .................................................................................................... 98
User Defined Object, GENUSD.................................................................................... 100
Choke Valve ....................................................................................................... 100
Pump Down 2-Way............................................................................................ 102
Pump Up 2-Way................................................................................................. 104
Valve01 .......................................................................................................... 106
6 3BSE026427R4001
Table of Contents
Valve Integer01 ..................................................................................................108
Valve Control, VALVECON..........................................................................................111
3-Valve01 ...........................................................................................................111
Damper01...........................................................................................................115
3BSE026427R4001 73BSE026427R4001 7
Table of Contents
8 3BSE026427R4001
About This Book
GeneralThis book describes the Extended Graphic Elements for 800xA for Advant Master, which enables data retrieval from the Advant Controller 400 Series to IndustrialIT 800xA Core System. 800xA for Advant Master contains built in display elements and faceplates for the standard ABB object types below listed:
– Analog Input AI
– Analog Output AO
– Binary Object GENBIN
– Data Base Parameters DAT(x)
– Digital Input DI
– Digital Output DO
– Motor Control MOTCON
– Process Controller PIDCON
– User Defined Object GENUSD
– Valve Control VALVECON
• The Control Connection Aspects (CCA) for each object type. Each CCA contains the following:
– The name, data type, access rights (read/write) and subscription update rate of each attribute.
– The name of the corresponding OPC item (object of the controller).
– A user interface to inspect the object type attribute information. It can also be used to subscribe for the current value of each attribute.
3BSE026427R4001 9
Intended User About This Book
• The graphic elements aspects of each type (close-up where relevant and a number of additional graphical presentations).
• A faceplate aspect for each type.
The Object types also include additional aspects such as an Icon aspect, an Alarm List aspect (for the instantiated object), and Trend aspect. This book is focused on describing the graphic elements and faceplates.
Intended UserThis instruction is intended for application engineers that build process graphics and make modifications to standard faceplates and graphic elements.
The reader should have experience with process control systems and Microsoft® Windows® operating systems. In general, Microsoft Windows functions are not described in this instruction.
The faceplate images in this manual are not updated to the latest versions. For example, the pin button in a faceplate is not shown.
10 3BSE026427R4001
About This Book Use of Warning, Caution, Information, and Tip Icons
Use of Warning, Caution, Information, and Tip IconsThis publication includes Warning, Caution, and Information where appropriate to point out safety related or other important information. It also includes Tip to point out useful hints to the reader. The corresponding symbols should be interpreted as follows:
Although Warning hazards are related to personal injury, and Caution hazards are associated with equipment or property damage, it should be understood that operation of damaged equipment could, under certain operational conditions, result in degraded process performance leading to personal injury or death. Therefore, comply fully with all Warning and Caution notices.
Electrical warning icon indicates the presence of a hazard which could result in electrical shock.
Warning icon indicates the presence of a hazard which could result in personal injury.
Caution icon indicates important information or warning related to the concept discussed in the text. It might indicate the presence of a hazard which could result in corruption of software or damage to equipment/property.
Information icon alerts the reader to pertinent facts and conditions.
Tip icon indicates advice on, for example, how to design your project or how to use a certain function
3BSE026427R4001 11
Document Conventions About This Book
Document ConventionsThe following conventions are used for the presentation of material:
• The words in names of screen elements (for example, the title in the title bar of a window, the label for a field of a dialog box) are initially capitalized.
• Capital letters are used for the name of a keyboard key if it is labeled on the keyboard. For example, press the ENTER key.
• Lowercase letters are used for the name of a keyboard key that is not labeled on the keyboard. For example, the space bar, comma key, and so on.
• Press CTRL+C indicates that you must hold down the CTRL key while pressing the C key (to copy a selected object in this case).
• Press ESC E C indicates that you press and release each key in sequence (to copy a selected object in this case).
• The names of push and toggle buttons are boldfaced. For example, click OK.
• The names of menus and menu items are boldfaced. For example, the File menu.
– The following convention is used for menu operations: MenuName > MenuItem > CascadedMenuItem. For example: select File > New > Type.
– The Start menu name always refers to the Start menu on the Windows Task Bar.
• System prompts/messages are shown in the Courier font, and user responses/input are in the boldfaced Courier font. For example, if you enter a value out of range, the following message is displayed:
Entered value is not valid. The value must be 0 to30.
You may be told to enter the string TIC132 in a field. The string is shown as follows in the procedure:
TIC132
Variables are shown using lowercase letters.
sequence name
12 3BSE026427R4001
About This Book Terminology
TerminologyThe following is a list of terms associated with the Extended Graphic Elements for 800xA for Advant Master for AC 400 Series, that you should be familiar with. The list contains terms and abbreviations that are unique to ABB or have a usage or definition that is different from standard industry usage..
Term Description
Graphic element A graphic aspect that has a reference to an Aspect Objects. Normally a part of a graphic display. A graphical object typically built up from several sub-elements and/or primitive elements. Some graphic elements are provided by ABB, while others may be built by the user.
Graphic element 1
Graphic element browser
A tool used to select object aware (graphic) elements in Graphics Builder.
Graphic expression Graphic expression is used to specify a data subscription and a relationship between process data and data to be displayed.
Examples of Graphic Elements provided by ABB:
81.4 M/MINValueField Bar Hscale
100.00.0
3BSE026427R4001 13
Related Documentation About This Book
Related Documentation
The following is a listing of documentation related to 800xA for Advant Master.
Graphic libraries Libraries of primitive elements, and standard graphic elements, for example faceplate element, object display and graphic element.
Faceplate Faceplates are used to monitor and control process data. A faceplate has a configuration view where you insert faceplate elements, buttons, status indicators and aspect links. The faceplate can have up to three run-time views:
reduced, normal and extended, depending on how much information the user wants.
Category Title Description
Installation IndustrialIT 800xA System Installation
This book describes the installation procedure for 800xA for Advant Master.
Configuration IndustrialIT 800xA System 800xA for Advant MasterConfiguration
This book describes how you connect AC 400 Series controllers to the Core System.
IndustrialIT 800xA System 800xA for Advant MasterGraphic Library
This book describes all the graphic elements and faceplates for AC 400 Series controllers specific object types.
Operation IndustrialIT 800xA System 800xA for Advant MasterOperation
This book describes how to operate the 800xA for Advant Master.
Term Description
14 3BSE026427R4001
Section 1 Extended Graphic Elements
Analog Input, AI
Integer Bargraph01
Presentation:
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame White SELECTED = 1 Object select frame
Invisible SELECTED = 0
2 AI Error ? Red flashing ERR = 1 and AL_UNACK = 1
Unacknowledged and I/O Error
? Yellow ERR = 1 and BLOCKED = 1
Input blocked and I/O Error
? Red ERR = 1 I/O Error
ERR = 0 Invisible
1.4.
2.3.6.7.
5.?
3BSE026427R4001 15
Analog Input, AI Section 1 Extended Graphic Elements
No Description Presentation Condition Remarks
3 Measured Value VALUE The object value
ERR = 1 Invisible - I/O Error
Red flashing AL_UNACK = 1 Unacknowledged
Yellow BLOCKED = 1 Input blocked
Red DISTURB = 1 Alarm
Green -
4 High Limit 2 HI_LIM2 Alarm High limit 2
HI_LIM2 >= RANGEMAX or EN_H2 = 0
Invisible
Filled Yellow VALUE>H2 = 1 and AL_BLK = 1
Logical colorblockedSymbol
Unfilled Yellow AL_BLK = 1 Logical colorblockedSymbol
Filled Red VALUE>H2 = 1
Unfilled Grey -
5 High Limit 1 HI_LIM1 Warning High limit 1
HI_LIM1 >= RANGEMAX or EN_H1 = 0
Invisible
Filled Yellow VALUE>H1 = 1 and AL_BLK = 1
Logical colorblockedSymbol
Unfilled Yellow AL_BLK = 1 Logical colorblockedSymbol
Filled Red VALUE>H1 = 1
Unfilled Grey -
16 3BSE026427R4001
Section 1 Extended Graphic Elements Analog Input, AI
Configuration:
No Description Presentation Condition Remarks
6 Low Limit 1 LO_LIM1 Warning Low limit 1
LO_LIM1 <= RANGEMIN or EN_L1 = 0
Invisible
Filled Yellow VALUE<L1 = 1 and AL_BLK = 1
Logical colorblockedSymbol
Unfilled Yellow AL_BLK = 1 Logical colorblockedSymbol
Filled Red VALUE<L1 = 1
Unfilled Grey -
7 Low Limit 2 LO_LIM2 Alarm Low limit 2
LO_LIM2 <= RANGEMIN or EN_L2 = 0
Invisible
Filled Yellow VALUE<L2 = 1 and AL_BLK = 1
Logical colorblockedSymbol
Unfilled Yellow AL_BLK = 1 Logical colorblockedSymbol
Filled Red VALUE<L2 = 1
Unfilled Grey -
Parameters AffectsOptions (bold is default)
Remarks
FrameStyle Raised, Sunken and Flat
FrameWidth 3, any width
Orientation Vertical, Horizontal
3BSE026427R4001 17
Analog Input, AI Section 1 Extended Graphic Elements
Integer Limit01
Presentation:
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame The object frame
Solid White SELECTED = 1 Object selected
Dotted Yellow AL_BLK = 1 Alarm blocked by operator
2 Measured Value VALUE Object value
Red / White cross VALUE is Bad No contact with Controller
Yellow BLOCKED =1 Input blocked
? ? ? Red flashing ERR = 1 andAL_UNACK = 1
Unacknowledged and I/O Error
Red flashing AL_UNACK = 1 Unacknowledged alarm
? ? ? Red ERR = 1 I/O Error
Red DISTURB = 1 Alarm
Green -
3.
2.1.
X
18 3BSE026427R4001
Section 1 Extended Graphic Elements Analog Input, AI
Configuration:
3 Limit
Yellow BLOCKED =1 Input blocked
? Red flashing ERR = 1 andAL_UNACK = 1
Unacknowledged and I/O Error
Red flashing AL_UNACK = 1 Unacknowledged alarm
? Red ERR = 1 I/O Error
H2 Red ABOVE_HI_LIM2 = 1 Above High Limit 2
H1 Red ABOVE_HI_LIM1 = 1 Above High Limit 1
L2 Red BELOW_LO_LIM2 = 1 Below Low Limit 2
L1 Red BELOW_LO_LIM1 = 1 Below Low Limit 1
Limit is Invisible
Parameters Affects Options (bold is default) Remarks
BackgroundColor 2. Measured Value & 3. Limit Black, any other color
No Description Presentation Condition Remarks
3BSE026427R4001 19
Analog Input, AI Section 1 Extended Graphic Elements
Integer Percent01
Presentation:
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame Solid White SELECTED = 1 Object select frame
Dotted Yellow AL_BLK = 1 Alarm blocked by operator
Invisible
2 Measured Value VALUE Object value
Red / White cross VALUE is Bad No contact with Controller
Yellow BLOCKED =1 Input blocked
? ? ? Red flashing ERR = 1 andAL_UNACK = 1
Unacknowledged and I/O Error
Red flashing AL_UNACK = 1 Unacknowledged alarm
? ? ? Red ERR = 1 I/O Error
Red DISTURB = 1 Alarm
Green -
1. 2.
X
20 3BSE026427R4001
Section 1 Extended Graphic Elements Analog Input, AI
Configuration:
Parameters AffectsOptions (bold is default)
Remarks
BackgroundColor 2. Measured Value Black, any other color
FrameStyle Flat, Raised and Sunken
FrameWidth 0, any width
3BSE026427R4001 21
Analog Output, AO Section 1 Extended Graphic Elements
Analog Output, AO
Integer Button01
Presentation:
Behavior:
Configuration:
No Description Presentation Condition Remarks
1 Lock Frame White SELECTED = 1 Object select frame
Invisible SELECTED = 0
2 Output Value VALUE Object value
Red flashing AL_UNACK = 1 Unacknowledged alarm
Yellow OUTP_BLK = 1 Output blocked
Red ERR = 1 Alarm
Cyan MAN = 1
Magenta MAN = 0
Parameters Affects Options (bold is default) Remarks
BackgroundColor 2. Output Value Black, any other color
FrameWidth 2, any width
2.1.
22 3BSE026427R4001
Section 1 Extended Graphic Elements Binary Object, GENBIN
Binary Object, GENBIN
3-Valve01
Presentation:
Down
Left
Right
3. Off-Symbol
Up
3. On-Symbol2.
1.
3BSE026427R4001 23
Binary Object, GENBIN Section 1 Extended Graphic Elements
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame The Object frame
Color Solid White Line SELECTED = 1 Object selected
Dotted Yellow Line ALARM_BLK = 1 Alarm blocked
2 Flags Status Indication
2.1 Alarm Indication
F Flashing Red AU_ST_00 = 1 orAU_ST_01 = 1 orAU_ST_04 = 1 orAU_ST_05 = 1 orAU_ST_06 = 1 orAU_ST_07 = 1
Unack Alarm Indication
F Red PC_ST_00 = 1 orPC_ST_01 = 1 orPC_ST_04 = 1 orPC_ST_05 = 1 orPC_ST_06 = 1 orPC_ST_07 = 1
Alarm Indication
X Yellow PC_ST_08 = 1 or PC_ST_09 = 1 orPC_ST_10 = 1 orPC_ST_11 = 1
Interlock Indication
2.2 Mode Indication ModeIndVis = 1
M Green PC_ST_20 = 1 Manual Indication
A Green PC_ST_19 = 1 Auto Indication
B Green PC_ST_21 = 1 Blocked Indication
S Green PC_ST_22 = 1 Standby Indication
2.3 Control Indication ControlIndVis = 1
R Green PC_ST_18 = 1 Remote Indication
L Green PC_ST_17 = 1 Local Indication
C Green PC_ST_16 = 1 Central Indication
24 3BSE026427R4001
Section 1 Extended Graphic Elements Binary Object, GENBIN
Configuration:
No Description Presentation Condition Remarks
3 Symbol 3D Display Object
3.1 Shape On-Symbol PC_ST_24 <> PC_ST_25 On
Off-Symbol PC_ST_24 = PC_ST_25 Off
Actuator ActuatorIndVis = 1 Actuator Indication Visible
Color Flashing Red AU_ST_00 = 1 orAU_ST_01 = 1 orAU_ST_04 = 1 orAU_ST_05 = 1 orAU_ST_06 = 1 orAU_ST_07 = 1
UnAck signal errorUnAck feedback errorUnAck alarm Hi limit2UnAck alarm HI limit1UnAck alarm Lo limit1UnAck alarm Lo limit2
Red PC_ST_00 = 1 orPC_ST_01 = 1 orPC_ST_04 = 1 orPC_ST_05 = 1 orPC_ST_06 = 1 orPC_ST_07 = 1
Signal errorAlarm feedback errorAlarm Hi limit2Alarm HI limit1Alarm Lo limit1Alarm Lo limit2
Flashing Green PC_ST_25 = 1
Green PC_ST_25 = 0
Parameters Affects Options (bold is default) Remarks
Direction 3 Symbol Up, Down, Left, Right
ActuatorIndVis 3 Symbol false, true
ControlIndVis 2 Flag false, true
ModeIndVis 2 Flag false, true
3BSE026427R4001 25
Binary Object, GENBIN Section 1 Extended Graphic Elements
3-Valve Long LLD01 (Left-Left-Down)
Presentation:
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame The Object frame
Color Solid White Line SELECTED = 1 Object selected
Dotted Yellow Line ALARM_BLK = 1 Alarm blocked
2 Flags Status Indication
2.1 Alarm Indication
F Flashing Red AU_ST_00 = 1 orAU_ST_01 = 1 orAU_ST_04 = 1 orAU_ST_05 = 1 orAU_ST_06 = 1 orAU_ST_07 = 1
Unack Alarm Indication
F Red PC_ST_00 = 1 orPC_ST_01 = 1 orPC_ST_04 = 1 orPC_ST_05 = 1 orPC_ST_06 = 1 orPC_ST_07 = 1
Alarm Indication
X Yellow PC_ST_08 = 1 or PC_ST_09 = 1 orPC_ST_10 = 1 orPC_ST_11 = 1
Interlock Indication
3. On-Symbol 3. Off-Symbol
2.
1.
26 3BSE026427R4001
Section 1 Extended Graphic Elements Binary Object, GENBIN
No Description Presentation Condition Remarks
2.2 Mode Indication ModeIndVis = 1
M Green PC_ST_20 = 1 Manual Indication
A Green PC_ST_19 = 1 Auto Indication
B Green PC_ST_21 = 1 Blocked Indication
S Green PC_ST_22 = 1 Standby Indication
2.3 Control Indication ControlIndVis = 1
Shape R Green PC_ST_18 = 1 Remote Indication
L Green PC_ST_17 = 1 Local Indication
C Green PC_ST_16 = 1 Central Indication
3 Symbol 3D Display Object
3.1 Shape On-Symbol PC_ST_24 <> PC_ST_25 On
Off-Symbol PC_ST_24 = PC_ST_25 Off
Actuator ActuatorIndVis = 1 Actuator Indication Visible
Color Flashing Red AU_ST_00 = 1 orAU_ST_01 = 1 orAU_ST_04 = 1 orAU_ST_05 = 1 orAU_ST_06 = 1 orAU_ST_07 = 1
UnAck signal errorUnAck feedback errorUnAck alarm Hi limit2UnAck alarm HI limit1UnAck alarm Lo limit1UnAck alarm Lo limit2
Red PC_ST_00 = 1 orPC_ST_01 = 1 orPC_ST_04 = 1 orPC_ST_05 = 1 orPC_ST_06 = 1 orPC_ST_07 = 1
Signal errorAlarm feedback errorAlarm Hi limit2Alarm HI limit1Alarm Lo limit1Alarm Lo limit2
Flashing Green PC_ST_25 = 1
Green PC_ST_25 = 0
3BSE026427R4001 27
Binary Object, GENBIN Section 1 Extended Graphic Elements
Configuration:
Parameters Affects Options (bold is default) Remarks
ActuatorIndVis 3 Symbol false, true
ControlIndVis 2 Flag false, true
ModeIndVis 2 Flag false, true
28 3BSE026427R4001
Section 1 Extended Graphic Elements Binary Object, GENBIN
3-Valve Long LRD01 (Left-Right-Down)
Presentation:
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame The Object frame
Color Solid White Line SELECTED = 1 Object selected
Dotted Yellow Line ALARM_BLK = 1 Alarm blocked
2 Flags Status Indication
2.1 Alarm Indication
F Flashing Red AU_ST_00 = 1 orAU_ST_01 = 1 orAU_ST_04 = 1 orAU_ST_05 = 1 orAU_ST_06 = 1 orAU_ST_07 = 1
Unack Alarm Indication
False
3. On-Symbol 3. Off-Symbol
2.
True1.
3BSE026427R4001 29
Binary Object, GENBIN Section 1 Extended Graphic Elements
No Description Presentation Condition Remarks
F Red PC_ST_00 = 1 orPC_ST_01 = 1 orPC_ST_04 = 1 orPC_ST_05 = 1 orPC_ST_06 = 1 orPC_ST_07 = 1
Alarm Indication
X Yellow PC_ST_08 = 1 or PC_ST_09 = 1 orPC_ST_10 = 1 orPC_ST_11 = 1
Interlock Indication
2.2 Mode Indication ModeIndVis = 1
M Green PC_ST_20 = 1 Manual Indication
A Green PC_ST_19 = 1 Auto Indication
B Green PC_ST_21 = 1 Blocked Indication
S Green PC_ST_22 = 1 Standby Indication
2.3 Control Indication ControlIndVis = 1
R Green PC_ST_18 = 1 Remote Indication
L Green PC_ST_17 = 1 Local Indication
C Green PC_ST_16 = 1 Central Indication
3 Symbol 3D Display Object
3.1 Shape On-Symbol PC_ST_24 <> PC_ST_25 On
Off-Symbol PC_ST_24 = PC_ST_25 Off
Actuator ActuatorIndVis = 1 Actuator Indication Visible
Color Flashing Red AU_ST_00 = 1 orAU_ST_01 = 1 orAU_ST_04 = 1 orAU_ST_05 = 1 orAU_ST_06 = 1 orAU_ST_07 = 1
UnAck signal errorUnAck feedback errorUnAck alarm Hi limit2UnAck alarm HI limit1UnAck alarm Lo limit1UnAck alarm Lo limit2
30 3BSE026427R4001
Section 1 Extended Graphic Elements Binary Object, GENBIN
Configuration:
No Description Presentation Condition Remarks
Red PC_ST_00 = 1 orPC_ST_01 = 1 orPC_ST_04 = 1 orPC_ST_05 = 1 orPC_ST_06 = 1 orPC_ST_07 = 1
Signal errorAlarm feedback errorAlarm Hi limit2Alarm HI limit1Alarm Lo limit1Alarm Lo limit2
Flashing Green PC_ST_25 = 1
Green PC_ST_25 = 0
Parameters Affects Options (bold is default) Remarks
ActuatorIndVis 3 Symbol false, true
ControlIndVis 2 Flag false, true
ModeIndVis 2 Flag false, true
3BSE026427R4001 31
Binary Object, GENBIN Section 1 Extended Graphic Elements
Breaker01
Presentation:
Horizontal1.
3. On-Symbol 3. Off-Symbol
2.Vertical
32 3BSE026427R4001
Section 1 Extended Graphic Elements Binary Object, GENBIN
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame The Object frame
Color Solid White Line SELECTED = 1 Object selected
Dotted Yellow Line ALARM_BLK = 1 Alarm blocked
2 Flags Status Indication
2.1 Alarm Indication
F Flashing Red AU_ST_00 = 1 orAU_ST_01 = 1 orAU_ST_04 = 1 orAU_ST_05 = 1 orAU_ST_06 = 1 orAU_ST_07 = 1
Unack Alarm Indication
F Red PC_ST_00 = 1 orPC_ST_01 = 1 orPC_ST_04 = 1 orPC_ST_05 = 1 orPC_ST_06 = 1 orPC_ST_07 = 1
Alarm Indication
X Yellow PC_ST_08 = 1 or PC_ST_09 = 1 orPC_ST_10 = 1 orPC_ST_11 = 1
Interlock Indication
2.2 Mode Indication ModeIndVis = 1
M Green PC_ST_20 = 1 Manual Indication
A Green PC_ST_19 = 1 Auto Indication
B Green PC_ST_21 = 1 Blocked Indication
S Green PC_ST_22 = 1 Standby Indication
2.3 Control Indication ControlIndVis = 1
R Green PC_ST_18 = 1 Remote Indication
L Green PC_ST_17 = 1 Local Indication
C Green PC_ST_16 = 1 Central Indication
3BSE026427R4001 33
Binary Object, GENBIN Section 1 Extended Graphic Elements
Configuration:
No Description Presentation Condition Remarks
3 Symbol 3D Display Object
3.1 Shape On-Symbol PC_ST_24 <> PC_ST_25 On
Off-Symbol PC_ST_24 = PC_ST_25 Off
Color Flashing Red AU_ST_00 = 1 orAU_ST_01 = 1 orAU_ST_04 = 1 orAU_ST_05 = 1 orAU_ST_06 = 1 orAU_ST_07 = 1
UnAck signal errorUnAck feedback errorUnAck alarm Hi limit2UnAck alarm HI limit1UnAck alarm Lo limit1UnAck alarm Lo limit2
Red PC_ST_00 = 1 orPC_ST_01 = 1 orPC_ST_04 = 1 orPC_ST_05 = 1 orPC_ST_06 = 1 orPC_ST_07 = 1
Signal errorAlarm feedback errorAlarm Hi limit2Alarm HI limit1Alarm Lo limit1Alarm Lo limit2
Flashing Green PC_ST_25 = 1
Green PC_ST_25 = 0
Parameters Affects Options (bold is default) Remarks
Orientation 3 Symbol Horizontal, Vertical
Dimension3D 3 Symbol false, true
ModeIndVis 2 Flag false, true
ControlIndVis 2 Flag false, true
34 3BSE026427R4001
Section 1 Extended Graphic Elements Binary Object, GENBIN
Choke Valve01
Presentation:
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame The Object frame
Color Solid White Line SELECTED = 1 Object selected
Dotted Yellow Line ALARM_BLK = 1 Alarm blocked
2 Flags Status Indication
2.1 Alarm Indication
F Flashing Red AU_ST_00 = 1 orAU_ST_01 = 1 orAU_ST_04 = 1 orAU_ST_05 = 1 orAU_ST_06 = 1 orAU_ST_07 = 1
Unack Alarm Indication
F Red PC_ST_00 = 1 orPC_ST_01 = 1 orPC_ST_04 = 1 orPC_ST_05 = 1 orPC_ST_06 = 1 orPC_ST_07 = 1
Alarm Indication
X Yellow PC_ST_08 = 1 or PC_ST_09 = 1 orPC_ST_10 = 1 orPC_ST_11 = 1
Interlock Indication
3. On-Symbol 3. Off-Symbol
2.
1.
3BSE026427R4001 35
Binary Object, GENBIN Section 1 Extended Graphic Elements
No Description Presentation Condition Remarks
2.2 Mode Indication ModeIndVis = 1
M Green PC_ST_20 = 1 Manual Indication
A Green PC_ST_19 = 1 Auto Indication
B Green PC_ST_21 = 1 Blocked Indication
S Green PC_ST_22 = 1 Standby Indication
2.3 Control Indication ControlIndVis = 1
R Green PC_ST_18 = 1 Remote Indication
L Green PC_ST_17 = 1 Local Indication
C Green PC_ST_16 = 1 Central Indication
3 Symbol 3D Display Object
3.1 Shape On-Symbol PC_ST_24 <> PC_ST_25 On
Off-Symbol PC_ST_24 = PC_ST_25 Off
Actuator ActuatorIndVis = 1 Actuator Indication Visible
Color Flashing Red AU_ST_00 = 1 orAU_ST_01 = 1 orAU_ST_04 = 1 orAU_ST_05 = 1 orAU_ST_06 = 1 orAU_ST_07 = 1
UnAck signal errorUnAck feedback errorUnAck alarm Hi limit2UnAck alarm HI limit1UnAck alarm Lo limit1UnAck alarm Lo limit2
Red PC_ST_00 = 1 orPC_ST_01 = 1 orPC_ST_04 = 1 orPC_ST_05 = 1 orPC_ST_06 = 1 orPC_ST_07 = 1
Signal errorAlarm feedback errorAlarm Hi limit2Alarm HI limit1Alarm Lo limit1Alarm Lo limit2
Flashing Green PC_ST_25 = 1
Green PC_ST_25 = 0
36 3BSE026427R4001
Section 1 Extended Graphic Elements Binary Object, GENBIN
Configuration:
Parameters Affects Options (bold is default) Remarks
VerticalPosition 3 Symbol Left, Right
ActuatorIndVis 3 Symbol false, true
ControlIndVis 2 Flag false, true
ModeIndVis 2 Flag false, true
3BSE026427R4001 37
Binary Object, GENBIN Section 1 Extended Graphic Elements
Damper01
Presentation:
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame The Object frame
Color Solid White Line SELECTED = 1 Object selected
Dotted Yellow Line ALARM_BLK = 1 Alarm blocked
2 Flags Status Indication
2.1 Alarm Indication
F Flashing Red AU_ST_00 = 1 orAU_ST_01 = 1 orAU_ST_04 = 1 orAU_ST_05 = 1 orAU_ST_06 = 1 orAU_ST_07 = 1
Unack Alarm Indication
F Red PC_ST_00 = 1 orPC_ST_01 = 1 orPC_ST_04 = 1 orPC_ST_05 = 1 orPC_ST_06 = 1 orPC_ST_07 = 1
Alarm Indication
X Yellow PC_ST_08 = 1 or PC_ST_09 = 1 orPC_ST_10 = 1 orPC_ST_11 = 1
Interlock Indication
3. On-Symbol 3. Off-Symbol
2.
1.
38 3BSE026427R4001
Section 1 Extended Graphic Elements Binary Object, GENBIN
No Description Presentation Condition Remarks
2.2 Mode Indication ModeIndVis = 1
M Green PC_ST_20 = 1 Manual Indication
A Green PC_ST_19 = 1 Auto Indication
B Green PC_ST_21 = 1 Blocked Indication
S Green PC_ST_22 = 1 Standby Indication
2.3 Control Indication ControlIndVis = 1
R Green PC_ST_18 = 1 Remote Indication
L Green PC_ST_17 = 1 Local Indication
C Green PC_ST_16 = 1 Central Indication
3 Symbol 3D Display Object
3.1 Shape On-Symbol PC_ST_24 <> PC_ST_25 On
Off-Symbol PC_ST_24 = PC_ST_25 Off
Color Flashing Red AU_ST_00 = 1 orAU_ST_01 = 1 orAU_ST_04 = 1 orAU_ST_05 = 1 orAU_ST_06 = 1 orAU_ST_07 = 1
UnAck signal errorUnAck feedback errorUnAck alarm Hi limit2UnAck alarm HI limit1UnAck alarm Lo limit1UnAck alarm Lo limit2
Red PC_ST_00 = 1 orPC_ST_01 = 1 orPC_ST_04 = 1 orPC_ST_05 = 1 orPC_ST_06 = 1 orPC_ST_07 = 1
Signal errorAlarm feedback errorAlarm Hi limit2Alarm HI limit1Alarm Lo limit1Alarm Lo limit2
Flashing Green PC_ST_25 = 1
Green PC_ST_25 = 0
3BSE026427R4001 39
Binary Object, GENBIN Section 1 Extended Graphic Elements
Configuration:
Parameters Affects Options (bold is default) Remarks
Orientation 3 Symbol Horizontal, Vertical
ControlIndVis 2 Flag false, true
ModeIndVis 2 Flag false, true
40 3BSE026427R4001
Section 1 Extended Graphic Elements Binary Object, GENBIN
Fan01
Presentation:
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame The Object frame
Color Solid White Line SELECTED = 1 Object selected
Dotted Yellow Line ALARM_BLK = 1 Alarm blocked
2 Flags Status Indication
2.1 Alarm Indication
F Flashing Red AU_ST_00 = 1 orAU_ST_01 = 1 orAU_ST_04 = 1 orAU_ST_05 = 1 orAU_ST_06 = 1 orAU_ST_07 = 1
Unack Alarm Indication
F Red PC_ST_00 = 1 orPC_ST_01 = 1 orPC_ST_04 = 1 orPC_ST_05 = 1 orPC_ST_06 = 1 orPC_ST_07 = 1
Alarm Indication
X Yellow PC_ST_08 = 1 or PC_ST_09 = 1 orPC_ST_10 = 1 orPC_ST_11 = 1
Interlock Indication
2.
3. On-Symbol 3. Off-Symbol
1.
3BSE026427R4001 41
Binary Object, GENBIN Section 1 Extended Graphic Elements
No Description Presentation Condition Remarks
2.2 Mode Indication ModeIndVis = 1
M Green PC_ST_20 = 1 Manual Indication
A Green PC_ST_19 = 1 Auto Indication
B Green PC_ST_21 = 1 Blocked Indication
S Green PC_ST_22 = 1 Standby Indication
2.3 Control Indication ControlIndVis = 1
R Green PC_ST_18 = 1 Remote Indication
L Green PC_ST_17 = 1 Local Indication
C Green PC_ST_16 = 1 Central Indication
3 Symbol 3D Display Object
3.1 Shape On-Symbol PC_ST_24 <> PC_ST_25 On
Off-Symbol PC_ST_24 = PC_ST_25 Off
Color Flashing Red AU_ST_00 = 1 orAU_ST_01 = 1 orAU_ST_04 = 1 orAU_ST_05 = 1 orAU_ST_06 = 1 orAU_ST_07 = 1
UnAck signal errorUnAck feedback errorUnAck alarm Hi limit2UnAck alarm HI limit1UnAck alarm Lo limit1UnAck alarm Lo limit2
Red PC_ST_00 = 1 orPC_ST_01 = 1 orPC_ST_04 = 1 orPC_ST_05 = 1 orPC_ST_06 = 1 orPC_ST_07 = 1
Signal errorAlarm feedback errorAlarm Hi limit2Alarm HI limit1Alarm Lo limit1Alarm Lo limit2
Flashing Green PC_ST_25 = 1
Green PC_ST_25 = 0
42 3BSE026427R4001
Section 1 Extended Graphic Elements Binary Object, GENBIN
Configuration:
Parameters Affects Options (bold is default) Remarks
Direction 1 Symbol Right, Up, Down, Left
ModeIndVis 2 Flag false, true
ControlIndVis 2 Flag false, true
3BSE026427R4001 43
Binary Object, GENBIN Section 1 Extended Graphic Elements
Mixer01
Presentation:
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame The Object frame
Color Solid White Line SELECTED = 1 Object selected
Dotted Yellow Line ALARM_BLK = 1 Alarm blocked
2 Flags Status Indication
2.1 Alarm Indication
F Flashing Red AU_ST_00 = 1 orAU_ST_01 = 1 orAU_ST_04 = 1 orAU_ST_05 = 1 orAU_ST_06 = 1 orAU_ST_07 = 1
Unack Alarm Indication
F Red PC_ST_00 = 1 orPC_ST_01 = 1 orPC_ST_04 = 1 orPC_ST_05 = 1 orPC_ST_06 = 1 orPC_ST_07 = 1
Alarm Indication
X Yellow PC_ST_08 = 1 or PC_ST_09 = 1 orPC_ST_10 = 1 orPC_ST_11 = 1
Interlock Indication
2.
3. On-Symbol 3. Off-Symbol
1.
44 3BSE026427R4001
Section 1 Extended Graphic Elements Binary Object, GENBIN
No Description Presentation Condition Remarks
2.2 Mode Indication ModeIndVis = 1
M Green PC_ST_20 = 1 Manual Indication
A Green PC_ST_19 = 1 Auto Indication
B Green PC_ST_21 = 1 Blocked Indication
S Green PC_ST_22 = 1 Standby Indication
2.3 Control Indication ControlIndVis = 1
R Green PC_ST_18 = 1 Remote Indication
L Green PC_ST_17 = 1 Local Indication
C Green PC_ST_16 = 1 Central Indication
3 Symbol 3D Display Object
3.1 Shape On-Symbol PC_ST_24 <> PC_ST_25 On
Off-Symbol PC_ST_24 = PC_ST_25 Off
Color Flashing Red AU_ST_00 = 1 orAU_ST_01 = 1 orAU_ST_04 = 1 orAU_ST_05 = 1 orAU_ST_06 = 1 orAU_ST_07 = 1
UnAck signal errorUnAck feedback errorUnAck alarm Hi limit2UnAck alarm HI limit1UnAck alarm Lo limit1UnAck alarm Lo limit2
Red PC_ST_00 = 1 orPC_ST_01 = 1 orPC_ST_04 = 1 orPC_ST_05 = 1 orPC_ST_06 = 1 orPC_ST_07 = 1
Signal errorAlarm feedback errorAlarm Hi limit2Alarm HI limit1Alarm Lo limit1Alarm Lo limit2
Flashing Green PC_ST_25 = 1
Green PC_ST_25 = 0
3BSE026427R4001 45
Binary Object, GENBIN Section 1 Extended Graphic Elements
Configuration:
Parameters Affects Options (bold is default) Remarks
ModeIndVis 2 Flag false, true
ControlIndVis 2 Flag false, true
46 3BSE026427R4001
Section 1 Extended Graphic Elements Binary Object, GENBIN
Motor01
Presentation:
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame The Object frame
Color Solid White Line SELECTED = 1 Object selected
Dotted Yellow Line ALARM_BLK = 1 Alarm blocked
2 Flags Status Indication
2.1 Alarm Indication
F Flashing Red AU_ST_00 = 1 orAU_ST_01 = 1 orAU_ST_04 = 1 orAU_ST_05 = 1 orAU_ST_06 = 1 orAU_ST_07 = 1
Unack Alarm Indication
F Red PC_ST_00 = 1 orPC_ST_01 = 1 orPC_ST_04 = 1 orPC_ST_05 = 1 orPC_ST_06 = 1 orPC_ST_07 = 1
Alarm Indication
X Yellow PC_ST_08 = 1 or PC_ST_09 = 1 orPC_ST_10 = 1 orPC_ST_11 = 1
Interlock Indication
3. On-Symbol 3. Off-Symbol
2.
1.
3BSE026427R4001 47
Binary Object, GENBIN Section 1 Extended Graphic Elements
No Description Presentation Condition Remarks
2.2 Mode Indication ModeIndVis = 1
M Green PC_ST_20 = 1 Manual Indication
A Green PC_ST_19 = 1 Auto Indication
B Green PC_ST_21 = 1 Blocked Indication
S Green PC_ST_22 = 1 Standby Indication
2.3 Control Indication ControlIndVis = 1
R Green PC_ST_18 = 1 Remote Indication
L Green PC_ST_17 = 1 Local Indication
C Green PC_ST_16 = 1 Central Indication
3 Symbol 3D Display Object
3.1 Shape On-Symbol PC_ST_24 <> PC_ST_25 On
Off-Symbol PC_ST_24 = PC_ST_25 Off
Color Flashing Red AU_ST_00 = 1 orAU_ST_01 = 1 orAU_ST_04 = 1 orAU_ST_05 = 1 orAU_ST_06 = 1 orAU_ST_07 = 1
UnAck signal errorUnAck feedback errorUnAck alarm Hi limit2UnAck alarm HI limit1UnAck alarm Lo limit1UnAck alarm Lo limit2
Red PC_ST_00 = 1 orPC_ST_01 = 1 orPC_ST_04 = 1 orPC_ST_05 = 1 orPC_ST_06 = 1 orPC_ST_07 = 1
Signal errorAlarm feedback errorAlarm Hi limit2Alarm HI limit1Alarm Lo limit1Alarm Lo limit2
Flashing Green PC_ST_25 = 1
Green PC_ST_25 = 0
48 3BSE026427R4001
Section 1 Extended Graphic Elements Binary Object, GENBIN
Configuration:
Parameters Affects Options (bold is default) Remarks
Orientation 3 Symbol Horizontal, Vertical
ControlIndVis 2 Flag false, true
ModeIndVis 2 Flag false, true
3BSE026427R4001 49
Binary Object, GENBIN Section 1 Extended Graphic Elements
Pump01
Presentation:
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame The Object frame
Color Solid White Line SELECTED = 1 Object selected
Dotted Yellow Line ALARM_BLK = 1 Alarm blocked
2 Flags Status Indication
2.1 Alarm Indication
F Flashing Red AU_ST_00 = 1 orAU_ST_01 = 1 orAU_ST_04 = 1 orAU_ST_05 = 1 orAU_ST_06 = 1 orAU_ST_07 = 1
Unack Alarm Indication
F Red PC_ST_00 = 1 orPC_ST_01 = 1 orPC_ST_04 = 1 orPC_ST_05 = 1 orPC_ST_06 = 1 orPC_ST_07 = 1
Alarm Indication
X Yellow PC_ST_08 = 1 or PC_ST_09 = 1 orPC_ST_10 = 1 orPC_ST_11 = 1
Interlock Indication
3. On-Symbol 3. Off-Symbol
2.
1.
50 3BSE026427R4001
Section 1 Extended Graphic Elements Binary Object, GENBIN
No Description Presentation Condition Remarks
2.2 Mode Indication ModeIndVis = 1
M Green PC_ST_20 = 1 Manual Indication
A Green PC_ST_19 = 1 Auto Indication
B Green PC_ST_21 = 1 Blocked Indication
S Green PC_ST_22 = 1 Standby Indication
2.3 Control Indication ControlIndVis = 1
R Green PC_ST_18 = 1 Remote Indication
L Green PC_ST_17 = 1 Local Indication
C Green PC_ST_16 = 1 Central Indication
3 Symbol 3D Display Object
3.1 Shape On-Symbol PC_ST_24 <> PC_ST_25 On
Off-Symbol PC_ST_24 = PC_ST_25 Off
Color Flashing Red AU_ST_00 = 1 orAU_ST_01 = 1 orAU_ST_04 = 1 orAU_ST_05 = 1 orAU_ST_06 = 1 orAU_ST_07 = 1
UnAck signal errorUnAck feedback errorUnAck alarm Hi limit2UnAck alarm HI limit1UnAck alarm Lo limit1UnAck alarm Lo limit2
Red PC_ST_00 = 1 orPC_ST_01 = 1 orPC_ST_04 = 1 orPC_ST_05 = 1 orPC_ST_06 = 1 orPC_ST_07 = 1
Signal errorAlarm feedback errorAlarm Hi limit2Alarm HI limit1Alarm Lo limit1Alarm Lo limit2
Flashing Green PC_ST_25 = 1
Green PC_ST_25 = 0
3BSE026427R4001 51
Binary Object, GENBIN Section 1 Extended Graphic Elements
Configuration:
Parameters Affects Options (bold is default) Remarks
Direction 1 Symbol Right, Up, Down, Left
ModeIndVis 2 Flag false, true
ControlIndVis 2 Flag false, true
52 3BSE026427R4001
Section 1 Extended Graphic Elements Binary Object, GENBIN
Valve01
Presentation:
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame The Object frame
Color Solid White Line SELECTED = 1 Object selected
Dotted Yellow Line ALARM_BLK = 1 Alarm blocked
2 Flags Status Indication
2.1 Alarm Indication
F Flashing Red AU_ST_00 = 1 orAU_ST_01 = 1 orAU_ST_04 = 1 orAU_ST_05 = 1 orAU_ST_06 = 1 orAU_ST_07 = 1
Unack Alarm Indication
F Red PC_ST_00 = 1 orPC_ST_01 = 1 orPC_ST_04 = 1 orPC_ST_05 = 1 orPC_ST_06 = 1 orPC_ST_07 = 1
Alarm Indication
X Yellow PC_ST_08 = 1 or PC_ST_09 = 1 orPC_ST_10 = 1 orPC_ST_11 = 1
Interlock Indication
3. Off-Symbol3. On-Symbol
2.
1.
3BSE026427R4001 53
Binary Object, GENBIN Section 1 Extended Graphic Elements
No Description Presentation Condition Remarks
2.2 Mode Indication ModeIndVis = 1
M Green PC_ST_20 = 1 Manual Indication
A Green PC_ST_19 = 1 Auto Indication
B Green PC_ST_21 = 1 Blocked Indication
S Green PC_ST_22 = 1 Standby Indication
2.3 Control Indication ControlIndVis = 1
R Green PC_ST_18 = 1 Remote Indication
L Green PC_ST_17 = 1 Local Indication
C Green PC_ST_16 = 1 Central Indication
3 Symbol 3D Display Object
3.1 Shape On-Symbol PC_ST_24 <> PC_ST_25 On
Off-Symbol PC_ST_24 = PC_ST_25 Off
Actuator ActuatorIndVis = 1 Actuator Indication Visible
Color Flashing Red AU_ST_00 = 1 orAU_ST_01 = 1 orAU_ST_04 = 1 orAU_ST_05 = 1 orAU_ST_06 = 1 orAU_ST_07 = 1
UnAck signal errorUnAck feedback errorUnAck alarm Hi limit2UnAck alarm HI limit1UnAck alarm Lo limit1UnAck alarm Lo limit2
Red PC_ST_00 = 1 orPC_ST_01 = 1 orPC_ST_04 = 1 orPC_ST_05 = 1 orPC_ST_06 = 1 orPC_ST_07 = 1
Signal errorAlarm feedback errorAlarm Hi limit2Alarm HI limit1Alarm Lo limit1Alarm Lo limit2
Flashing Green PC_ST_25 = 1
Green PC_ST_25 = 0
54 3BSE026427R4001
Section 1 Extended Graphic Elements Binary Object, GENBIN
Configuration:
Parameters Affects Options (bold is default) Remarks
Orientation 3 Symbol Horizontal, Vertical
ActuatorIndVis 3 Symbol false, true
ModeIndVis 2 Flag false, true
ControlIndVis 2 Flag false, true
3BSE026427R4001 55
Data Base Parameters, DAT(x) Section 1 Extended Graphic Elements
Data Base Parameters, DAT(x)
Square01
Presentation:
Behavior:
Configuration:
No Description Presentation Condition Remarks
1 Symbol 2D Display Object
1.1 Shape On-Symbol VALUE = 1 Data true
Off-Symbol VALUE = 0 Data false
1.2 Color Green VALUE = 1
2 Label Black VALUE = 1
Grey VALUE = 0
Parameters Affects Options (bold is default) Remarks
FrameWidth 1 Symbol 2, 1..4
LabelText 2 Label ““, any other character
2.
1. On-Symbol 1. Off-Symbol
56 3BSE026427R4001
Section 1 Extended Graphic Elements Digital Input, DI
Digital Input, DI
Arrow01
Presentation:
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame The Object frame
Color Solid White Line SELECTED = 1 Object selected
Dotted Yellow Line ALARM_BLK = 1 Alarm blocked
2 Symbol 2D and 3D Display Object
2.1 Shape On-Symbol (VALUE = 1 and Inverted = 0) or(VALUE = 0 andInverted = 1)
Input closed
Off-Symbol (VALUE = 0 andInverted = 0) or(VALUE = 1 andInverted = 1)
Input open
2. On-Symbol 2. On-Symbol
1.
3BSE026427R4001 57
Digital Input, DI Section 1 Extended Graphic Elements
Configuration:
No Description Presentation Condition Remarks
2.2 Color Flashing Red ALARM_UNACK= 1 Alarm unacknowledged
Yellow UPD_BLK = 1 Input blocked
Red (DISTURBANCE = 1 andDisturbanceUsed = 1 orERROR = 1
Alarm acknowledgedbut disturbance exists orInput error
Light Blue
Parameters Affects Options (bold is default) Remarks
Direction 2 Symbol Right, Left, Up, Down
DisturbanceUsed 2 Symbol false, true
Inverted 2 Symbol false, true
58 3BSE026427R4001
Section 1 Extended Graphic Elements Digital Input, DI
Breaker01
Presentation:
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame The Object frame
Color Solid White Line SELECTED = 1 Object selected
Dotted Yellow Line ALARM_BLK = 1 Alarm blocked
2 Symbol 2D and 3D Display Object
2.1 Shape On-Symbol (VALUE = 1 and Inverted = 0) or(VALUE = 0 andInverted = 1)
Input closed
Horizontal1.
2. On-Symbol 2. Off-Symbol
Vertical
3BSE026427R4001 59
Digital Input, DI Section 1 Extended Graphic Elements
Configuration:
No Description Presentation Condition Remarks
Off-Symbol (VALUE = 0 andInverted = 0) or(VALUE = 1 andInverted = 1)
Input open
2.2 Color Flashing Red ALARM_UNACK= 1 Alarm unacknowledged
Yellow UPD_BLK = 1 Input blocked
Red (DISTURBANCE = 1 andDisturbanceUsed = 1 orERROR = 1
Alarm acknowledgedbut disturbance exists orInput error
Green
Parameters Affects Options (bold is default) Remarks
Dimension3D 2 Symbol false, true
Orientation 2 Symbol Horizontal, Vertical
DisturbanceUsed 2 Symbol false, true
Inverted 2 Symbol false, true
60 3BSE026427R4001
Section 1 Extended Graphic Elements Digital Input, DI
Damper01
Presentation:
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame The Object frame
Color Solid White Line SELECTED = 1 Object selected
Dotted Yellow Line ALARM_BLK = 1 Alarm blocked
2 Symbol 3D Display Object
2.1 Shape On-Symbol (VALUE = 1 and Inverted = 0) or(VALUE = 0 andInverted = 1)
Input closed
Off-Symbol (VALUE = 0 andInverted = 0) or(VALUE = 1 andInverted = 1)
Input open
2.2 Color Flashing Red ALARM_UNACK= 1 Alarm unacknowledged
Yellow UPD_BLK = 1 Input blocked
Red (DISTURBANCE = 1 andDisturbanceUsed = 1 orERROR = 1
Alarm acknowledgedbut disturbance exists orInput error
Green
2. On-Symbol 2. Off-Symbol
1.
3BSE026427R4001 61
Digital Input, DI Section 1 Extended Graphic Elements
Configuration:
Parameters Affects Options (bold is default) Remarks
Orientation 2 Symbol Horizontal, Vertical
DisturbanceUsed 2 Symbol false, true
Inverted 2 Symbol false, true
FrameWidth 2 Frame 2, (1..4)
62 3BSE026427R4001
Section 1 Extended Graphic Elements Digital Input, DI
Diamond01
Presentation:
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame The Object frame
Color Solid White Line SELECTED = 1 Object selected
Dotted Yellow Line ALARM_BLK = 1 Alarm blocked
2 Symbol 3D Display Object
2.1 Shape Q ERROR = 1 Input error
On-Symbol (VALUE = 1 and Inverted = 0) or(VALUE = 0 andInverted = 1)
Input closed
Off-Symbol (VALUE = 0 andInverted = 0) or(VALUE = 1 andInverted = 1)
Input open
2. On-Symbol 2. Off-Symbol
1,
3BSE026427R4001 63
Digital Input, DI Section 1 Extended Graphic Elements
Configuration:
No Description Presentation Condition Remarks
2.2 Color Flashing Red ALARM_UNACK= 1 Alarm unacknowledged
Yellow UPD_BLK = 1 Input blocked
Red (DISTURBANCE = 1 andDisturbanceUsed = 1 orERROR = 1
Alarm acknowledgedbut disturbance exists orInput error
Green
Parameters Affects Options (bold is default) Remarks
DisturbanceUsed 2 Symbol false, true
Inverted 2 Symbol false, true
FrameWidth 2 Frame 2, (1..4)
64 3BSE026427R4001
Section 1 Extended Graphic Elements Digital Input, DI
Earth01
Presentation:
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame The Object frame
Color Solid White Line SELECTED = 1 Object selected
Dotted Yellow Line ALARM_BLK = 1 Alarm blocked
2 Symbol 2D Display Object
2.1 Shape On-Symbol (VALUE = 1 and Inverted = 0) or(VALUE = 0 andInverted = 1)
Input closed
Off-Symbol (VALUE = 0 andInverted = 0) or(VALUE = 1 andInverted = 1)
Input open
2.2 Color Flashing Red ALARM_UNACK= 1 Alarm unacknowledged
Yellow UPD_BLK = 1 Input blocked
Red (DISTURBANCE = 1 andDisturbanceUsed = 1 orERROR = 1
Alarm acknowledgedbut disturbance exists orInput error
Green
2. On-Symbol 2. Off-Symbol
1.
3BSE026427R4001 65
Digital Input, DI Section 1 Extended Graphic Elements
Configuration:
Parameters Affects Options (bold is default) Remarks
DisturbanceUsed 2 Symbol false, true
Inverted 2 Symbol false, true
66 3BSE026427R4001
Section 1 Extended Graphic Elements Digital Input, DI
Fan01
Presentation:
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame The Object frame
Color Solid White Line SELECTED = 1 Object selected
Dotted Yellow Line ALARM_BLK = 1 Alarm blocked
2 Symbol 23D Display Object
2.1 Shape On-Symbol (VALUE = 1 and Inverted = 0) or(VALUE = 0 andInverted = 1)
Input closed
Off-Symbol (VALUE = 0 andInverted = 0) or(VALUE = 1 andInverted = 1)
Input open
2.2 Color Flashing Red ALARM_UNACK= 1 Alarm unacknowledged
Yellow UPD_BLK = 1 Input blocked
Red (DISTURBANCE = 1 andDisturbanceUsed = 1 orERROR = 1
Alarm acknowledgedbut disturbance exists orInput error
Green
2. On-Symbol 2. Off-Symbol
1.
3BSE026427R4001 67
Digital Input, DI Section 1 Extended Graphic Elements
Configuration:
Parameters Affects Options (bold is default) Remarks
Direction 2 Symbol Right, Left, Up, Down
DisturbanceUsed 2 Symbol false, true
Inverted 2 Symbol false, true
68 3BSE026427R4001
Section 1 Extended Graphic Elements Digital Input, DI
IndicatorText01
Presentation:
Behavior:
No Description Presentation Condition Remarks
1 Symbol 2D Display Object
1.1 Shape Q SELECTED = 0 and ERROR = 1
Input error
[ Q ] SELECTED = 1 and ERROR = 1
Input error
On SELECTED = 0 and ((VALUE = 1 andInverted = 0) or(VALUE = 0 andInverted = 1))
Input closed
[ On ] SELECTED = 1 and ((VALUE = 1 andInverted = 0) or(VALUE = 0 andInverted = 1))
Input closed
Off SELECTED = 0 and ((VALUE = 0 andInverted = 0) or(VALUE = 1 andInverted = 1))
Input open
1. On-Symbol 1. Off-Symbol
3BSE026427R4001 69
Digital Input, DI Section 1 Extended Graphic Elements
Configuration:
No Description Presentation Condition Remarks
[ Off ] SELECTED = 1 and ((VALUE = 0 andInverted = 0) or(VALUE = 1 andInverted = 1))
Input open
1.2 Color
White SELECTED = 1 Object selected
Flashing Red ALARM_UNACK = 1 Alarm Unacknowledged
Yellow UPD_BLK = 1 andERROR = 1
Input Blocked andinput error
Red (DISTURBANCE = 1 andDisturbanceUsed = 1) or ERROR = 1
Alarm Acknowledgedorinput error
Yellow (VALUE = 1 andInverted = 0) or(VALUE = 0 andInverted = 1)
Input open
Magenta (VALUE = 0 andInverted = 0) or(VALUE = 1 andInverted = 1)
Input closed
Parameters Affects Options (bold is default) Remarks
DisturbanceUsed 1. Symbol false, true
Inverted 1 Symbol false, true
LabelOffText 1. Symbol “Off“, any letter
LabelOnText 1. Symbol “On“, any letter
70 3BSE026427R4001
Section 1 Extended Graphic Elements Digital Input, DI
IndicatorText02
Presentation:
Behavior:
No Description Presentation Condition Remarks
1 Symbol 2D Display Object
1.1 Label Q ERROR = 1 Input Error
Generator Not Available
(VALUE = 1 andInverted = 0) or(VALUE = 0 andInverted = 1)
Input On Label visibleLabelOnText
- (VALUE = 0 andInverted = 0) or(VALUE = 1andInverted = 1)
Input Off Label visibleLabelOffText
1. On-Label 1. Off-Label
3BSE026427R4001 71
Digital Input, DI Section 1 Extended Graphic Elements
Configuration:
No Description Presentation Condition Remarks
1.2 Color
White SELECTED = 1 Object Select
Flashing Red ERROR = 1 Input Error
Flashing Red (VALUE = 1 andInverted = 0) or(VALUE = 0 andInverted = 1)
Black (VALUE = 0 andInverted = 0) or(VALUE = 1 andInverted = 1)
Parameters Affects Options (bold is default) Remarks
Inverted 1. Symbol false, true
LabelOffText 1. Symbol “-“, any letter
LabelOnText 1. Symbol “Generator Not Available“, any letter
72 3BSE026427R4001
Section 1 Extended Graphic Elements Digital Input, DI
IndicatorText03
Presentation:
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame The Object frame
Solid White Line SELECTED = 1 Object selected
2 Symbol
2.1 Shape F (DISTURBANCE = 1 and DisturbanceUsed = 1) or ALARM_UNACK = 1
Alarm unacknowledged
B ALARM_BLK = 1 orALARM_PERIOD_BLK = 1 or REPEAT_FAIL_BLK = 1
Alarm Blocked
Invisible Else
2.2 Color Yellow flash REPEAT_FAIL_BLK = 1
Red flash ALARM_UNACK = 1 Alarm unacknowledged
Yellow ALARM_BLK = 1 orALARM_PERIOD_BLK = 1
Alarm Blocked
Red DISTURBANCE = 1 Alarm acknowledged
2. F-Symbol 2. B-Symbol
1.
3BSE026427R4001 73
Digital Input, DI Section 1 Extended Graphic Elements
Configuration:
Parameters Affects Options (bold is default) Remarks
DisturbanceUsed 2. Symbol false, true
74 3BSE026427R4001
Section 1 Extended Graphic Elements Digital Input, DI
Motor01
Presentation:
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame The Object frame
Color Solid White Line SELECTED = 1 Object selected
Dotted Yellow Line ALARM_BLK = 1 Alarm blocked
2 Symbol 3D Display Object
2.1 Shape On-Symbol (VALUE = 1 and Inverted = 0) or(VALUE = 0 andInverted = 1)
Input closed
Off-Symbol (VALUE = 0 andInverted = 0) or(VALUE = 1 andInverted = 1)
Input open
2. On-Symbol 2. Off-Symbol
1.
3BSE026427R4001 75
Digital Input, DI Section 1 Extended Graphic Elements
Configuration:
No Description Presentation Condition Remarks
2.2 Color Flashing Red ALARM_UNACK= 1 Alarm unacknowledged
Yellow UPD_BLK = 1 Input blocked
Red (DISTURBANCE = 1 andDisturbanceUsed = 1 orERROR = 1
Alarm acknowledgedbut disturbance exists orInput error
Green
Parameters Affects Options (bold is default) Remarks
DisturbanceUsed 2 Symbol false, true
Inverted 2 Symbol false, true
76 3BSE026427R4001
Section 1 Extended Graphic Elements Digital Input, DI
Pump01
Presentation:
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame The Object frame
Color Solid White Line SELECTED = 1 Object selected
Dotted Yellow Line ALARM_BLK = 1 Alarm blocked
2 Symbol 3D Display Object
2.1 Shape On-Symbol (VALUE = 1 and Inverted = 0) or(VALUE = 0 andInverted = 1)
Input closed
Off-Symbol (VALUE = 0 andInverted = 0) or(VALUE = 1 andInverted = 1)
Input open
2.2 Color Flashing Red ALARM_UNACK= 1 Alarm unacknowledged
Yellow UPD_BLK = 1 Input blocked
Red (DISTURBANCE = 1 andDisturbanceUsed = 1 orERROR = 1
Alarm acknowledgedbut disturbance exists orInput error
Green
2. On-Symbol 2. Off-Symbol
1.
3BSE026427R4001 77
Digital Input, DI Section 1 Extended Graphic Elements
Configuration:
Parameters Affects Options (bold is default) Remarks
Direction 2 Symbol Right, Left, Up, Down
DisturbanceUsed 2 Symbol false, true
Inverted 2 Symbol false, true
78 3BSE026427R4001
Section 1 Extended Graphic Elements Digital Input, DI
Reg Loop01
Presentation:
Up1.
Down
Left
Right
2. Off-Symbol2. On-Symbol
3BSE026427R4001 79
Digital Input, DI Section 1 Extended Graphic Elements
Behavior:
Configuration:
No Description Presentation Condition Remarks
1 Lock Frame The Object frame
Color Solid White Line SELECTED = 1 Object selected
Dotted Yellow Line ALARM_BLK = 1 Alarm blocked
2 Symbol 2D Display Object
2.1 Shape On-Symbol (VALUE = 1 and Inverted = 0) or(VALUE = 0 andInverted = 1)
Input closed
Off-Symbol (VALUE = 0 andInverted = 0) or(VALUE = 1 andInverted = 1)
Input open
2.2 Color Flashing Red ALARM_UNACK= 1 Alarm unacknowledged
Yellow UPD_BLK = 1 Input blocked
Red (DISTURBANCE = 1 andDisturbanceUsed = 1 orERROR = 1
Alarm acknowledgedbut disturbance exists orInput error
Green
Parameters Affects Options (bold is default) Remarks
Direction 2 Symbol Up, Down, Right, Left
DisturbanceUsed 2 Symbol false, true
Inverted 2 Symbol false, true
80 3BSE026427R4001
Section 1 Extended Graphic Elements Digital Input, DI
Valve01
Presentation:
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame The Object frame
Color Solid White Line SELECTED = 1 Object selected
Dotted Yellow Line ALARM_BLK = 1 Alarm blocked
2 Symbol 3D Display Object
2.1 Shape On-Symbol (VALUE = 1 and Inverted = 0) or(VALUE = 0 andInverted = 1)
Input closed
Off-Symbol (VALUE = 0 andInverted = 0) or(VALUE = 1 andInverted = 1)
Input open
Actuator ActuatorIndVis = True Actuator visible
2. On-Symbol 2. Off-Symbol
1.
3BSE026427R4001 81
Digital Input, DI Section 1 Extended Graphic Elements
Configuration:
No Description Presentation Condition Remarks
2.2 Color Flashing Red ALARM_UNACK= 1 Alarm unacknowledged
Yellow UPD_BLK = 1 Input blocked
Red (DISTURBANCE = 1 andDisturbanceUsed = 1 orERROR = 1
Alarm acknowledgedbut disturbance existsorInput error
Green
Parameters Affects Options (bold is default) Remarks
Orientation 2 Symbol Horizontal, Vertical
ActuatorIndVis 2 Symbol false, true
DisturbanceUsed 2 Symbol false, true
Inverted 2 Symbol false, true
FrameWidth 1 Symbol 2, 1..4
82 3BSE026427R4001
Section 1 Extended Graphic Elements Digital Output, DO
Digital Output, DO
Diamond01
Presentation:
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame The Object frame
Color Solid White Line SELECTED = 1 Object selected
2 Label
Label Character LabelText
Color Black
3 Symbol 3D Display Object
3.1 Shape On-Symbol (VALUE = 1 and Inverted = 0) or(VALUE = 0 andInverted = 1)
Pressed inOutput On
Off-Symbol (VALUE = 0 andInverted = 0) or(VALUE = 1 andInverted = 1)
Output Off
Cross MAN_MODE = 0 Auto mode
3. On-Symbol 3 Off-Symbol
2.
1.
3BSE026427R4001 83
Digital Output, DO Section 1 Extended Graphic Elements
Configuration:
No Description Presentation Condition Remarks
3.2 Color Yellow OUTP_BLK = 1 Output blocked
Flashing Red ALARM_UNACK= 1 Alarm unacknowledged
Red ERROR = 1 Output error
Cyan MAN_MODE = 1 Manual mode
Magenta MAN_MODE = 0 Auto mode
Parameters Affects Options (bold is default) Remarks
Inverted 3 Symbol false, true
FrameWidth 3 Symbol 2, 1..4
LabelText 2 Label “ “, any character
84 3BSE026427R4001
Section 1 Extended Graphic Elements Digital Output, DO
Reg Loop01
Presentation:
Up1.
Down
Left
2. Off-Symbol2. On-Symbol
Right
3BSE026427R4001 85
Digital Output, DO Section 1 Extended Graphic Elements
Behavior:
Configuration:
No Description Presentation Condition Remarks
1 Lock Frame The Object frame
Color Solid White Line SELECTED = 1 Object selected
2 Symbol 2D Display Object
2.1 Shape On-Symbol (VALUE = 1 and Inverted = 0) or(VALUE = 0 andInverted = 1)
Output closed
Off-Symbol (VALUE = 0 andInverted = 0) or(VALUE = 1 andInverted = 1)
Output open
2.2 Color Yellow OUTP_BLK = 1 Output blocked
Flashing Red ALARM_UNACK= 1 Alarm unacknowledged
Red ERROR = 1 Output error
Cyan MAN_MODE = 1 Manual mode
Magenta MAN_MODE = 0 Auto mode
Parameters Affects Options (bold is default) Remarks
Direction 2 Symbol Up, Down, Left and Right
Inverted 2. Symbol false, true
86 3BSE026427R4001
Section 1 Extended Graphic Elements Digital Output, DO
Reg Loop02
Presentation:
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame The Object frame
Color Solid White Line SELECTED = 1 Object selected
2 Symbol 2D Display Object
2.1 Shape On-Symbol (VALUE = 1 and Inverted = 0) or(VALUE = 0 andInverted = 1)
Output closed
Off-Symbol (VALUE = 0 andInverted = 0) or(VALUE = 1 andInverted = 1)
Output open
2.2 Color Yellow OUTP_BLK = 1 Output blocked
Flashing Red ALARM_UNACK= 1 Alarm unacknowledged
Red ERROR = 1 Output error
Cyan MAN_MODE = 1 Manual mode
Magenta MAN_MODE = 0 Auto mode
2. On-Symbol 2. Off-Symbol
1.
3BSE026427R4001 87
Digital Output, DO Section 1 Extended Graphic Elements
Configuration:
Parameters Affects Options (bold is default) Remarks
Inverted 2 Symbol false, true
FrameWidth 2. Symbol 2, 1..4
88 3BSE026427R4001
Section 1 Extended Graphic Elements Digital Output, DO
Square01
Presentation:
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame The Object frame
Color Solid White Line SELECTED = 1 Object selected
2 Label
Label Character LabelText
Color Black
3 Symbol 3D Display Object
3.1 Shape On-Symbol (VALUE = 1 and Inverted = 0) or(VALUE = 0 andInverted = 1)
Pressed inOutput On
Off-Symbol (VALUE = 0 andInverted = 0) or(VALUE = 1 andInverted = 1)
Output Off
Cross MAN_MODE = 0 Auto mode
3. On-Symbol 3. Off-Symbol
2.
1.
3BSE026427R4001 89
Digital Output, DO Section 1 Extended Graphic Elements
Configuration:
No Description Presentation Condition Remarks
3.2 Color Yellow OUTP_BLK = 1 Output blocked
Flashing Red ALARM_UNACK= 1 Alarm unacknowledged
Red ERROR = 1 Output error
Cyan MAN_MODE = 1 Manual mode
Magenta MAN_MODE = 0 Auto mode
Parameters Affects Options (bold is default) Remarks
Inverted 3 Symbol false, true
FrameWidth 3 Symbol 2, 1..4
LabelText 2 Label “ “, any character
90 3BSE026427R4001
Section 1 Extended Graphic Elements Digital Output, DO
Valve01
Presentation:
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame The Object frame
Color Solid White Line SELECTED = 1 Object selected
2 Symbol 3D Display Object
2.1 Shape On-Symbol (VALUE = 1 and Inverted = 0) or(VALUE = 0 andInverted = 1)
Output closed
Off-Symbol (VALUE = 0 andInverted = 0) or(VALUE = 1 andInverted = 1)
Output open
Actuator ActuatorIndVis = True Actuator visible
2.2 Color Yellow OUTP_BLK = 1 Output blocked
Flashing Red ALARM_UNACK= 1 Alarm unacknowledged
Red ERROR = 1 Output error
Cyan MAN_MODE = 1 Manual mode
Magenta MAN_MODE = 0 Auto mode
2. On-Symbol 2. Off-Symbol
1.
3BSE026427R4001 91
Digital Output, DO Section 1 Extended Graphic Elements
Configuration:
Parameters Affects Options (bold is default) Remarks
Orientation 2 Symbol Horizontal, Vertical
ActuatorIndVis 2 Symbol false, true
Inverted 2 Symbol false, true
FrameWidth 2. Symbol 2, 1..4
92 3BSE026427R4001
Section 1 Extended Graphic Elements Motor Control, MOTCON
Motor Control, MOTCON
Fan01
Presentation:
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame Solid White SELECTED = 1 Selected
Solid Yellow IND2_00 = 1 Interlock override by operator
Dotted Yellow AL_BLK = 1 Alarm blocked by operator
Invisible -
3. On-Symbol 3. Off-Symbol
2.
1.
3BSE026427R4001 93
Motor Control, MOTCON Section 1 Extended Graphic Elements
No Description Presentation Condition Remarks
2 Mode ModeIndVis= True Status Indication
M Green IND2_05 = 0 andIND2_02 = 0 andIND2_03 = 0
Manual mode
A Green flashing IND2_05 = 1 andIND2_02 = 0 andIND2_03 = 0 andIND2_06 = 0 andIND1_12 = 0
Indicates Auto StartInit Not Performed
A Green IND2_05 = 1 andIND2_02 = 0 andIND2_03 = 0
Auto mode
* Yellow IND2_02 = 1 Test mode
ModeIndVis = False Mode invisible
3 Symbol 3D Display Object
3.1 Shape On-Symbol IND1_12 = 1 or
IND1_15 = 1 Started
Off-Symbol IND1_12 = 0 and
IND1_15 = 0 Stopped
3.2 Color Grey IMPLEMENTED = 0 Implemented
Grey IND2_03 = 1 Out of service
Red flashing AU_IND = 1 Alarm unacknowledged
Red IND1_DIST = 1 Error
Green flashing IND1_15 = 1 Change of Direction in progress
Green -
94 3BSE026427R4001
Section 1 Extended Graphic Elements Motor Control, MOTCON
Configuration:
Parameters Affects Options (bold is default) Remarks
Direction 3. Symbol Right, Up, Down and Left
ModIndVis 2. Mode True, False
3BSE026427R4001 95
Motor Control, MOTCON Section 1 Extended Graphic Elements
Pump01
Presentation:
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame Solid White SELECTED = 1 Selected
Solid Yellow IND2_00 = 1 Interlock override by operator
Dotted Yellow AL_BLK = 1 Alarm blocked by operator
Invisible -
2 Mode ModeIndVis= True Status Indication
M Green IND2_05 = 0 andIND2_02 = 0 andIND2_03 = 0
Manual mode
A Green flashing IND2_05 = 1 andIND2_02 = 0 andIND2_03 = 0 andIND2_06 = 0 andIND1_12 = 0
Indicates Auto StartInit Not Performed
A Green IND2_05 = 1 andIND2_02 = 0 andIND2_03 = 0
Auto mode
* Yellow IND2_02 = 1 Test mode
ModeIndVis = False Mode invisible
3. On-Symbol 3. Off-Symbol
2.
1.
96 3BSE026427R4001
Section 1 Extended Graphic Elements Motor Control, MOTCON
Configuration:
No Description Presentation Condition Remarks
3 Symbol 3D Display Object
3.1 Shape On-Symbol IND1_12 = 1 or
IND1_15 = 1 Started
Off-Symbol IND1_12 = 0 and
IND1_15 = 0 Stopped
3.2 Color Grey IMPLEMENTED = 0 Implemented
Grey IND2_03 = 1 Out of service
Red flashing AU_IND = 1 Alarm unacknowledged
Red IND1_DIST = 1 Error
Green flashing IND1_15 = 1 Change of Direction in progress
Green -
Parameters Affects Options (bold is default) Remarks
Direction 3. Symbol Right, Up, Down and Left
ModIndVis 2. Mode True, False
3BSE026427R4001 97
Process Controller, PIDCON Section 1 Extended Graphic Elements
Process Controller, PIDCON
Integer Limit01
Presentation:
Behavior:
No Description Default Presentation Condition Remarks
1 Lock Frame
Solid White Line SELECTED = 1 Object select frame
Dotted Yellow Line ALARM_F1_BLK = 1 or ALARM_F2_BLK
Alarm blocked by Operator
? ? ? in Flashing Red TS_AI_ERROR = 1 and ALARM_UNACK 1
Alarm Unacknowledged
Flashing Red ALARM_UNACK = 1 Alarm Unacknowledged
? ? ? in Red TS_AI_ERROR = 1 Alarm Acknowledged
Red DIST = 1 Alarm Acknowledged
Green
3.
1. 2.
98 3BSE026427R4001
Section 1 Extended Graphic Elements Process Controller, PIDCON
Configuration:
3 Limit
H2 Red TS_MV_ABOVE_H2 = 1 Alarm High Limit 2
H1 Red TS_MV_ABOVE_H1 = 1 Alarm High Limit 1
L2 Red TS_MV_BELOW_L2 = 1 Alarm Low Limit 2
L1 Red TS_MV_BELOW_L1 = 1 Alarm Low Limit 1
Limit is invisible
Parameters Affects Options (bold is default) Remarks
Format 2 Value “#0.00”, any other Visual Basic Format
No Description Default Presentation Condition Remarks
3BSE026427R4001 99
User Defined Object, GENUSD Section 1 Extended Graphic Elements
User Defined Object, GENUSD
Choke Valve
Presentation:
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame The Object frame
Color Solid White Line SELECTED = 1 Object selected
Dotted Yellow Line ALARM_BLK = 1 Alarm blocked
2 Flags Status Indication
2.1 Alarm Indication
F Flashing Red AU_ST_00 = 1 orAU_ST_01 = 1
Unack Alarm Indication
F Red PC_ST_00 = 1 orPC_ST_01 = 1
Alarm Indication
X Yellow PC_ST_08 = 1 or PC_ST_09 = 1 orPC_ST_10 = 1 orPC_ST_11 = 1
Interlock Indication
2.
3. On-Symbol 3. Off-Symbol
1.
100 3BSE026427R4001
Section 1 Extended Graphic Elements User Defined Object, GENUSD
Configuration:
No Description Presentation Condition Remarks
2.2 Mode Indication ModeIndVis = 1
M Green PC_ST_20 = 1 Manual Indication
A Green PC_ST_19 = 1 Auto Indication
B Green PC_ST_21 = 1 Blocked Indication
S Green PC_ST_22 = 1 Standby Indication
2.3 Control Indication ControlIndVis = 1
M3 Green PC_ST_18 = 1 Remote Indication
M2 Green PC_ST_17 = 1 Local Indication
M1 Green PC_ST_16 = 1 Central Indication
3 Symbol 3D Display Object
3.1 Shape On-Symbol PC_ST_24 <> PC_ST_25
Off-Symbol PC_ST_24 = PC_ST_25
Actuator ActuatorIndVis = 1
3.2 Color
Flashing Red AU_ST_00 = 1 orAU_ST_01 = 1
Unack signal errorUnAck feedback error
Red PC_ST_00 = 1 orPC_ST_01 = 1
Signal errorFeedback error
Flashing Green PC_ST_25 = 1
Green PC_ST_25 = 0
Parameters Affects Options (bold is default) Remarks
VerticalPosition 3 Symbol Left, Right
ActuatorIndVis 3 Symbol false, true
ControlIndVis 2 Flag false, true
ModeIndVis 2 Flag false, true
3BSE026427R4001 101
User Defined Object, GENUSD Section 1 Extended Graphic Elements
Pump Down 2-Way
Presentation:
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame The Object frame
Color Solid White Line SELECTED = 1 Object selected
Dotted Yellow Line ALARM_BLK = 1 Alarm blocked
2 Flags Status Indication
2.1 Alarm Indication
F Flashing Red AU_ST_00 = 1 orAU_ST_01 = 1
Unack Alarm Indication
F Red PC_ST_00 = 1 orPC_ST_01 = 1
Alarm Indication
X Yellow PC_ST_08 = 1 or PC_ST_09 = 1 orPC_ST_10 = 1 orPC_ST_11 = 1
Interlock Indication
2.2 Mode Indication ModeIndVis = 1
M Green PC_ST_20 = 1 Manual Indication
A Green PC_ST_19 = 1 Auto Indication
B Green PC_ST_21 = 1 Blocked Indication
S Green PC_ST_22 = 1 Standby Indication
3. Forward-Symbol 3. Reverse-Symbol 3. Off-Symbol
2.
1.
102 3BSE026427R4001
Section 1 Extended Graphic Elements User Defined Object, GENUSD
Configuration:
No Description Presentation Condition Remarks
2.3 Control Indication ControlIndVis = 1
M3 Green PC_ST_18 = 1 Remote Indication
M2 Green PC_ST_17 = 1 Local Indication
M1 Green PC_ST_16 = 1 Central Indication
3 Symbol 3D Display Object
3.1 Shape Forward-Symbol PC_ST_24 = 1 and PC_ST_25 = 0
Reverse-Symbol PC_ST_24 = 0 and PC_ST_25 = 1
Off-Symbol PC_ST_24 = PC_ST_25
3.2 Color
Flashing Red AU_ST_00 = 1 orAU_ST_01 = 1
Unack signal errorUnAck Feedback error
Red PC_ST_00 = 1 orPC_ST_01 = 1
Signal errorFeedback error
Flashing Green PC_ST_25 = 1
Green PC_ST_25 = 0
Parameters Affects Options (bold is default) Remarks
ControlIndVis 2 Flag false, true
ModeIndVis 2 Flag false, true
3BSE026427R4001 103
User Defined Object, GENUSD Section 1 Extended Graphic Elements
Pump Up 2-Way
Presentation:
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame The Object frame
Color Solid White Line SELECTED = 1 Object selected
Dotted Yellow Line ALARM_BLK = 1 Alarm blocked
2 Flags Status Indication
2.1 Alarm Indication
F Flashing Red AU_ST_00 = 1 orAU_ST_01 = 1
Unack Alarm Indication
F Red PC_ST_00 = 1 orPC_ST_01 = 1
Alarm Indication
X Yellow PC_ST_08 = 1 or PC_ST_09 = 1 orPC_ST_10 = 1 orPC_ST_11 = 1
Interlock Indication
3. Forward-Symbol 3. Reverse-Symbol 3. Off-Symbol
2.
1.
104 3BSE026427R4001
Section 1 Extended Graphic Elements User Defined Object, GENUSD
Configuration:
No Description Presentation Condition Remarks
2.2 Mode Indication ModeIndVis = 1
M Green PC_ST_20 = 1 Manual Indication
A Green PC_ST_19 = 1 Auto Indication
B Green PC_ST_21 = 1 Blocked Indication
S Green PC_ST_22 = 1 Standby Indication
2.3 Control Indication ControlIndVis = 1
M3 Green PC_ST_18 = 1 Remote Indication
M2 Green PC_ST_17 = 1 Local Indication
M1 Green PC_ST_16 = 1 Central Indication
3 Symbol 3D Display Object
3.1 Shape Forward-Symbol PC_ST_24 = 1 and PC_ST_25 = 0
Reverse-Symbol PC_ST_24 = 0 and PC_ST_25 = 1
Off-Symbol PC_ST_24 = PC_ST_25
3.2 Color
Flashing Red AU_ST_00 = 1 orAU_ST_01 = 1
Unack signal errorUnAck Feedback error
Red PC_ST_00 = 1 orPC_ST_01 = 1
Signal errorFeedback error
Flashing Green PC_ST_25 = 1
Green PC_ST_25 = 0
Parameters Affects Options (bold is default) Remarks
ControlIndVis 2 Flag false, true
ModeIndVis 2 Flag false, true
3BSE026427R4001 105
User Defined Object, GENUSD Section 1 Extended Graphic Elements
Valve01
Presentation:
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame The Object frame
Color Solid White Line SELECTED = 1 Object selected
Dotted Yellow Line ALARM_BLK = 1 Alarm blocked
2 Flags Status Indication
2.1 Alarm Indication
F Flashing Red AU_ST_00 = 1 orAU_ST_01 = 1
Unack Alarm Indication
F Red PC_ST_00 = 1 orPC_ST_01 = 1
Alarm Indication
X Yellow PC_ST_08 = 1 or PC_ST_09 = 1 orPC_ST_10 = 1 orPC_ST_11 = 1
Interlock Indication
2.
3. On-Symbol 3. Off-Symbol
1.
106 3BSE026427R4001
Section 1 Extended Graphic Elements User Defined Object, GENUSD
Configuration:
No Description Presentation Condition Remarks
2.2 Mode Indication ModeIndVis = 1
M Green PC_ST_20 = 1 Manual Indication
A Green PC_ST_19 = 1 Auto Indication
B Green PC_ST_21 = 1 Blocked Indication
S Green PC_ST_22 = 1 Standby Indication
2.3 Control Indication ControlIndVis = 1
M3 Green PC_ST_18 = 1 Remote Indication
M2 Green PC_ST_17 = 1 Local Indication
M1 Green PC_ST_16 = 1 Central Indication
3 Symbol 3D Display Object
3.1 Shape On-Symbol PC_ST_24 <> PC_ST_25
Off-Symbol PC_ST_24 = PC_ST_25
Actuator ActuatorIndVis = 1
3.2 Color
Flashing Red AU_ST_00 = 1 orAU_ST_01 = 1
Unack signal errorUnAck feedback error
Red PC_ST_00 = 1 orPC_ST_01 = 1
Signal errorFeedback error
Flashing Green PC_ST_25 = 1
Green PC_ST_25 = 0
Parameters Affects Options (bold is default) Remarks
Orientation 3 Symbol Horizontal, Vertical
ActuatorIndVis 3 Symbol false, true
ModeIndVis 2 Flag false, true
ControlVis 2 Flag false, true
3BSE026427R4001 107
User Defined Object, GENUSD Section 1 Extended Graphic Elements
Valve Integer01
Presentation:
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame The Object frame
Color Solid White Line SELECTED = 1 Object selected
Dotted Yellow Line ALARM_BLK = 1 Alarm blocked
2 Flags Status Indication
2.1 Alarm Indication
F Flashing Red AU_ST_00 = 1 orAU_ST_01 = 1 or
Unack Alarm Indication
F Red PC_ST_00 = 1 orPC_ST_01 = 1
Alarm Indication
X Yellow PC_ST_08 = 1 or PC_ST_09 = 1 orPC_ST_10 = 1 orPC_ST_11 = 1
Interlock Indication
2.2 Mode Indication ModeIndVis = 1
M Green PC_ST_20 = 1 Manual Indication
A Green PC_ST_19 = 1 Auto Indication
B Green PC_ST_21 = 1 Blocked Indication
5.
2.
4.
3. On-Symbol 3. Off-Symbol
1.
108 3BSE026427R4001
Section 1 Extended Graphic Elements User Defined Object, GENUSD
No Description Presentation Condition Remarks
S Green PC_ST_22 = 1 Standby Indication
2.3 Control Indication ControlIndVis = 1
M3 Green PC_ST_18 = 1 Remote Indication
M2 Green PC_ST_17 = 1 Local Indication
M1 Green PC_ST_16 = 1 Central Indication
3 Symbol 3D Display Object
3.1 Shape On-Symbol PC_ST_24 <> PC_ST_25
Off-Symbol PC_ST_24 = PC_ST_25
Label Actuator ActuatorIndVis = 1
3.2 Color
Flashing Red AU_ST_00 = 1 orAU_ST_01 = 1
Unack signal errorUnAck feedback error
Red PC_ST_00 = 1 orPC_ST_01 = 1
Signal errorFeedback error
Flashing Green PC_ST_25 = 1
Green PC_ST_25 = 0
4 MV Measured Value
4.1 Color Flashing Red AU_ST_00-07 = 1 or Unacknowledged alarm
Red PC_ST_00-07 = 1 or Alarm
Green
5 Label Actuator Label
5.1 Color Flashing Red AU_ST_00-02 = 1 or
Red PC_ST_00-02 = 1 or
Green Flashing PC_ST_25 = 1
Green PC_ST_25 = 0
3BSE026427R4001 109
User Defined Object, GENUSD Section 1 Extended Graphic Elements
Configuration:
Parameters Affects Options (bold is default) Remarks
ActuatorIndVis 2 Flag false, true
ControlIndVis 2 Flag false, true
ModeIndVis 2 Flag false, true
Label 5 Label Actuator “M”, any character
UnitVisible 4 MV true, false
110 3BSE026427R4001
Section 1 Extended Graphic Elements Valve Control, VALVECON
Valve Control, VALVECON
3-Valve01
Presentation:
Down
Left
Right
2.
3. On-Symbol 3. Off-Symbol
Up1.
3BSE026427R4001 111
Valve Control, VALVECON Section 1 Extended Graphic Elements
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame Solid White SELECTED = 1 Selected
Solid Yellow IND2_00 = 1 Interlock override by operator
Dotted Yellow AL_BLK = 1 Alarm blocked by operator
Invisible -
2 Flags Status Indication
2.1 Mode Indication ModeIndVis = 1
* Yellow IND2_02 = 1 andIND2_03 = 0
Test
A Green IND2_05 = 1 andIND2_02 = 0 andIND2_03 = 0
Auto Mode
M Green IND2_05 = 0 andIND2_02 = 0 andIND2_03 = 0
Manual Mode
2.2 Control Indication PointOfControlIndVis = 0
S Green IND2_04 = 1 Sequence control
L Green IND2_01 = 1 and IND2_04 = 0
Local control
C Green IND2_01 = 0 andIND2_04 = 0
Central control
- PointOfControlIndVis = 0 Point of control is invisible
2.3 Interlock Indication InterlockIndVis = 1 and IND2_03
XA Yellow IND2_14 = 1 IA1
IND2_07 = 1 Ready to start
112 3BSE026427R4001
Section 1 Extended Graphic Elements Valve Control, VALVECON
Configuration:
No Description Presentation Condition Remarks
X Yellow IND2_08 = 1 orIND2_09 = 1 orIND2_11 = 1 or(IND2_13 = 1 andIND1_11 = 0) or(IND2_00 = 0 and(IND2_10 = 1 or(IND2_12 = 1 andIND1_11 = 0)))
IC1 orIC2 orIB2 or(IB4 &OPN = 0) or(Blkintl = 0 &(IB1 or(IB3 &OPN = 0)))
3 Symbol 3D Display Object
3.1 Shape On-Symbol IND1_11 = 1 Limit position for open
Off-Symbol IND1_11 = 0 No limit position for open
Actuator ActuatorIndVis = 1 Actuator visible
3.2 Color
Grey IMPLEMENTED = 0
Grey IND2_03 = 1 Out of service
Red Flashing IND1_09 = 1 Unacknowledged Alarm
Red IND1_08 = 1 Alarm or Error
Green flashing IND1_15 = 1 andIND1_12 = 0
Intermediate position Not open
Green flashing IND1_15 = 1 andIND1_12 = 1
Intermediate position Open
Green No intermediate position Limit position for open
Parameters Affects Options (bold is default) Remarks
Direction 3 Symbol Down, Up, Right, Left
ActuatorIndVis 3 Symbol false, true
ModeIndVis 2 Flag true, false
3BSE026427R4001 113
Valve Control, VALVECON Section 1 Extended Graphic Elements
PointOfControlIndVis 2 Flag true, false
InterlockIndVis 2 Flag false, true
Parameters Affects Options (bold is default) Remarks
114 3BSE026427R4001
Section 1 Extended Graphic Elements Valve Control, VALVECON
Damper01
Presentation:
Behavior:
No Description Presentation Condition Remarks
1 Lock Frame Solid White SELECTED = 1 Selected
Solid Yellow IND2_00 = 1 Interlock override by operator
Dotted Yellow AL_BLK = 1 Alarm blocked by operator
Invisible -
2 Flags Status Indication
2.1 Mode Indication ModeIndVis = 1
* Yellow IND2_02 = 1 andIND2_03 = 0
Test
A Green IND2_05 = 1 andIND2_02 = 0 andIND2_03 = 0
Auto Mode
M Green IND2_05 = 0 andIND2_02 = 0 andIND2_03 = 0
Manual Mode
2.2 Control Indication PointOfControlIndVis = 0
S Green IND2_04 = 1 Sequence control
L Green IND2_01 = 1 and IND2_04 = 0
Local control
3. On-Symbol 3. Off-Symbol
2.
1.
3BSE026427R4001 115
Valve Control, VALVECON Section 1 Extended Graphic Elements
No Description Presentation Condition Remarks
C Green IND2_01 = 0 andIND2_04 = 0
Central control
- PointOfControlIndVis = 0 Point of control is invisible
2.3 Interlock Indication InterlockIndVis = 1 and IND2_03 = 0
XA Yellow IND2_14 = 1 IA1
IND2_07 = 1 Ready to start
X Yellow IND2_08 = 1 orIND2_09 = 1 orIND2_11 = 1 or(IND2_13 = 1 andIND1_11 = 0) or(IND2_00 = 0 and(IND2_10 = 1 or(IND2_12 = 1 andIND1_11 = 0)))
IC1 orIC2 orIB2 or(IB4 &OPN = 0) or(Blkintl = 0 &(IB1 or(IB3 &OPN = 0)))
3 Symbol 3D Display Object
3.1 Shape On-Symbol IND1_11 = 1 Limit position for open
Off-Symbol IND1_11 = 0 No limit position for open
3.2 Color
Grey IMPLEMENTED = 0
Grey IND2_03 = 1 Out of service
Red Flashing IND1_09 = 1 Unacknowledged Alarm
Red IND1_08 = 1 Alarm or Error
Green flashing IND1_15 = 1 andIND1_12 = 0
Intermediate position Not open
Green flashing IND1_15 = 1 andIND1_12 = 1
Intermediate position Open
Green No intermediate position Limit position for open
116 3BSE026427R4001
Section 1 Extended Graphic Elements Valve Control, VALVECON
Configuration:
Parameters Affects Options (bold is default) Remarks
Orientation 3 Symbol Horizontal, Vertical
ModeIndVis 2 Flag true, false
PointOfControlIndVis 2 Flag true, false
InterlockIndVis 2 Flag false, true
3BSE026427R4001 117
Valve Control, VALVECON Section 1 Extended Graphic Elements
118 3BSE026427R4001
3BSE026427R4001. Printed in Sweden October 2004Copyright © 2003–2004 by ABB. All Rights Reserved® Registered Trademark of ABB.™ Trademark of ABB.
Automation Technology ProductsMannheim, Germanywww.abb.de/processautomationemail: marketing.control-prod-
Automation Technology Products Västerås, Swedenwww.abb.com/processautomationemail: [email protected]
Automation Technology ProductsWickliffe, Ohio, USAwww.abb.com/processautomationemail: [email protected]
http://www.abb.com/control
Top Related