• INSTALL TILE
• INSTALL WEDGE-IT UNDER TILE
EPS FOAM INSTALLEDUNDER YOUR TILE ROOFPROVIDES...
EPS FOAM INSTALLEDUNDER YOUR TILE ROOFPROVIDES...
Reduced Noise Pollution
Added Insulation
Lower Heating and Cooling Costs
Walkability
With Wedge-It installed, youadd comfort and value.
INSULATIONINSULATIONWEDGE-IT PROVIDES ADDED INSULATION
AND SOUND PROOFING
WEDGE-IT was invented by a roofer. The creation wasinspired by the concern of homeowners asking thequestion…”Can we walk on our roof after it isinstalled?”
WEDGE-IT, properly installedunder tile roofs can
more than doublethe load bearing
capacity ofthat roof.
In addition,WEDGE-ITprovides a substantialamount ofadded insu-
lation andsound proofing.
WEDGE-IT iseasy to install.
Just place it over thetar paper and the properly
fastened tiles will secure it.
EPS foam can with-stand heavy loadsand extreme condi-tions. The AlaskanPipeline was insulatedand stabilized withEPS.
More than 3.6 millionboard ft. of InsulfoamEPS is incorporatedin the roof, walls, fireproofing, specialshapes, and figuresfor the Las VegasMGM Grand Hotel.
EPS Foam is sodurable it is beingused here to stabilizebridge and road con-struction.
WEDGE-IT is made fromExpanded Polystyrene Foam
(EPS) the same product used to make foam cups. If you can trust 1/8” to protect
your hand from boiling coffee,imagine what WEDGE-IT will dofor the comfort in your home.
WEDGE-IT MORE THAN DOUBLES THE LOAD BEARING CAPACITY
WALKABILITYWALKABILITY
Manufactured By:Premier Industries InsulfoamLargest EPS Block Molder in the Nation35 Years in Business
Complies To Uniform Building Code
Classified UL Rated
Thoroughly Tested:Safe, Non Corrosive, Non-Toxic Environmentally Responsible, Contains no CFCHCFC or Formaldehyde
EPS Code Compliance:Meets HUD Specification , ASTM C578 ICBO 3414Foamed Plastic 84Z2
Surface Burning CharacteristicFlame Spread 20#Smoke Developed 150-300#
R-Values Type I 1# Approx. 4.35 per inch
WHAT OUR CUSTOMERS ARE SAYING
WHAT OUR CUSTOMERS ARE SAYING
Telephone: 714-903-1444Toll Free: 866-469-3343Fax: 714-593-6154
Patent PendingInsulation & Roof Tile Support
www.gowedge.comwww.gowedge.com
“We just installed new roofs with Wedge-It on 229homes in our Home Owners Association. We tooksamples of the roofing with the Wedge-It supportsunderneath and stomped across it to prove it wouldhold up. The Wedge-It came out best. The good insu-lating qualities means we will no doubt get savingson our heating and air-conditioning costs over theyears. We observed that the Wedge-It product wasvery easy to install. We feel we made the best choice and are very pleased.”– James M.
Board Member and Homeowner for HOA Fullerton, CA
“I’ve been painting for 20 years, I walk on a lot ofroofs. This is the best thing to happen to tile roofs.A homeowner would be a fool not to install Wedge-It.The first time they paint will pay for it. I just re-roofed my own home and Wedge-It is up there.”– Steve M.
Painter, Orange County, CA
“Many of my customers want a tile roof & are wor-ried about tile breakage. They are relieved to knowabout Wedge-It, it makes perfect sense to them.EPS foam has primarily two purposes, TO INSULATE& REDUCE BREAKAGE. It doesn’t take much for ahomeowner to understand that. It is a shame to not let your customer know about this innovative product.”– Scott S.
Salesman, Orange County, CA
“I installed the Wedge-It under my new roof. It hasimproved the interior comfort. Other people on theblock are jealously waiting.”– Carl D.
Homeowner, 86 Home Project, Irvine, CA
“Wedge-It was specified on a church in Springville UT.It was easy and quick to install. We’ll be using more.”– Steve Davis
Salesman, Pleasant Grove UT
Top Related