MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ISSUE FOR BID: 10.25.19
MONROE COUNTY COMMUNITY COLLEGE EAST WEST TECHNOLOGY BUILDING
1555 SOUTH RASINVILLE ROADMONROE, MI
EAST/WEST TECHNOLGY BUILDING RENOVATION | FF&E SPECIFICATIONS
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
FRONT END SPECIFICATIONS
ACCESSORIES
CHAIRS
LOUNGE
STORAGE
TABLES
WORKSTATIONS
*FINISHES SHOWN FOR REFERENCE ONLY. FINAL FINISH SELECTION AT POST BID AWARD*
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
Table of Contents
• Project Schedule
• Request for Bid Proposal
• Proposal Requirements
• Instructions to Bidders
o Confidentiality
o Proposal Award Criteria
o References
o Installation and Scheduling
• General Specification Notes
o Project Closeout
o Submittals
• Insurance Requirements
• Bid Summary Form
• Furniture Specifications
• Furniture Plans
Project Schedule
• Bid Issue Date 10/25/2019
• Bid Questions Due Date 10/31/2019: 3:00pm]
• Bid Questions Response Date 11/06/2019
• Bid Due Date 11/11/2019 :3:00pm]
• Purchase Orders Issued 12/02/2019
• Pre-installation meeting 05/01/2020
• Anticipated date of construction substantial completion 05/11/2020
• Furniture Installation 05/11/2020 - 05/22/2020
• Furniture Punchlist 05/25/2020 – 05/27/2020
• Client Move-In 06/30/2020
• Completed Punchlist Report Due 06/15/2020
*Furniture installation is based on anticipated construction completion.
Request for Bid Proposal
SEALED BIDS & (1) USB Digital copy must be received by: 11/11/2019 :3:00pm]
Address reply to (Owner): Kelly Heinzerling
Director of Purchasing and Auxiliary Services
Monroe County Community College
1555 S. Raisinville Rd., Monroe, MI 48161
734.384.4275
ADDITIONAL copy & (1) USB Digital copy must be sent to Stantec by: 11/11/2019:3:00pm]
Reply To: Bethany Janik
Interior Designer
Stantec Architecture
2338 Coolidge Hwy., Berkley MI 48072
248.336.4750
Vendor: __________________________________________________
__________________________________________________
__________________________________________________
__________________________________________________
__________________________________________________
Monroe County Community College (Owner) invites bids to provide furniture for the East/West
Technology Buildings Renovations and Additional Project (Project).
Refer to the enclosed bid package including Furniture Plans, the Specifications, form of
agreement, general conditions, and other Bid Proposal Requirements to furnish and install
furniture for the Project.
SEALED BIDS & (1) USB DIGITAL COPY ARE DUE: 11/11/2019 :3:00pm] local time to the owner at
the address of the Owner (indicated above). Proposals received after that time will not be
accepted. Bids will be opened publicly and read aloud immediately.
The furniture package will be awarded within two (2) weeks of the bid due date.
Proposal Requirements
Failure to include any of the following documents in the submitted proposal will result in
disqualification:
❑ Bid Summary Form
❑ Furniture specification and cut sheet/brochure of each item proposed
❑ References
❑ Attachments A and/or B (included)
❑ Installer Information
❑ Schedule for Process through Installation (including but not limited to: date that purchase
order must be received in order to meet schedule, length of time needing for
manufacturing, shipping dates, anticipated time needed for installation)
❑ Guarantees for Future Orders, Product Availability and Price Protection
❑ Substantial Completion Information
Instruction to Bidders
1. The Owner reserves the following rights: to accept or reject any bid; to reject all
bids; to waive any formalities or irregularities contained in a bid that do not comply
with the terms and conditions of the invitation to bid, modifications to the invitation
to bid, or specification; to select the bid and/or items that in the sole and absolute
discretion of the Owner are in their best interest whether or not the bid selected is
the lowest monetary bid received.
2. The Owner reserves the right to evaluate and award this bid by manufacture-
product group. Partial bids may not be accepted. Bidders are required to provide
a complete bid per package. Owner reserves the right to award the packages per
best value as they see fit.
3. This RFP in no manner obligates the Owner to the purchase of any products or
services described, implied, or which may be proposed, until confirmed by written
agreement, and may be withdrawn by the Owner without penalty or obligation at
any time prior to the signing of the agreement or purchase order.
4. Expenses for developing and presenting proposals are the responsibility of the
Vendor and shall not be charged to the Owner. Supporting documentation and
manuals submitted with this proposal become the property of the Owner.
5. Questions regarding the Furniture Specifications and Plans are to be directed to
Bethany Janik of Stantec via email, copying the Kelly Heinzerling. All questions must
be submitted by 10/31/2019:3:00pm]. Questions will be compiled as they are
received, and a response including answers to all questions will be emailed to all
vendors on 11/06/2019. Responses will be provided to all Vendors bidding the
project. It is each Vendor’s responsibility to review these clarifications and
incorporate into their bid accordingly. Vendors, manufacturers, installation
companies and any related parties may contact the client directly.
6. By submitting a proposal, each Vendor affirms that they have examined the
documents presented herein and satisfied itself as to the conditions under which it
will be obligated to provide new furniture, fixtures and equipment in accordance
with this RFP. Vendors are required to view drawings and specifications to insure
they are adhered to exactly when quotes are submitted. No claim for additional
compensation will be allowed due to unfamiliarity with the documents.
7. There will be no substitutions to any of the specified items (unless items can be
proven to substantially meet requirements of quality, functionality and aesthetics.
For proposed substitutes, Vendor must supply a sample of each furniture piece that
differs from the specified design basis for Owner evaluation at the time proposals
are submitted. Swatches or chips of manufacturer’s standard finish options must
also be provided. All samples shall be delivered to Kelly Heinzerling’s attention.)
8. No changes to the contract shall be made, nor invoices for extra charges,
alterations, modifications, deviations, and extra orders be recognized or paid
except upon a written change order from the Owner. The Owner will not authorize
payment for changes, alterations, modifications, deviations, etc. that are a result of
Vendor error.
9. Client will pay a deposit on applicable items only. Paperwork substantiating the
need will be required. Client will pay final invoices within [45 days] of delivery
pending any outstanding punch list issues.
10. The Owner in conjunction with Stantec reserves the right to adjust the quantities
required for this project as best meets its needs. The Owner reserves the right to
deduct TWENTY PERCENT (20%), in cost terms, from the original specification
quantities without any effect on discounts on all products or the unit prices
submitted.
11. On the Bid Summary Form, please provide the following line items: proposed
manufacturer, proposed product, model number, quantity, unit sell price, unit list
price, discount percentage, extended sell price, delivery, freight, installation, fees,
and labor.
12. Should a Vendor find discrepancies in or omissions from the specifications,
quantities, drawings, instructions and bid proposal form, or should he/she be in
doubt as to the meaning, he/she should notify Stantec, via email by date and time
indicated on the Schedule.
13. It will be the Vendor’s responsibility to verify all quantities required for the items
specified. For the purpose of a level bid Vendors must use the quantities outlined in
this RFP. If the vendor notes a discrepancy (as noted above) they are to inform
Stantec and note the discrepancy in their bid response.
14. It is the Vendor’s responsibility to note in their proposal, any detail or specification
that would void any warranty or disrupt the product’s structural integrity.
15. Vendor is required to verify all model numbers to written description. Description
shall take precedence over model numbers. Notify Stantec of any discrepancies
during verification.
16. The Vendor warrants to Owner that all materials, furniture, furnishings and
equipment furnished under this contract will be new (unless noted as relocated
from current Owner’s facilities, or as specified to be bought as used per
specifications) and that work will be of industry standard quality, free from defects
and faults, and in conformance with the contract documents and specifications.
All work not conforming to these requirements may be considered defective. If
required by Owner, the Vendor shall furnish satisfactory evidence as to the kind
and quality of materials and equipment.
17. Bids are to be held open for 120 days. The Vendor selected to provide and/or
install the furniture specified in this document shall guarantee all unit prices for
twelve (12) months from date of the Vendors proposal.
18. The Vendor shall furnish a guarantee from each manufacturer guaranteeing the
availability of specified products for ten (10) years from date of original delivery
and/or provide non-obsolence clauses.
19. The vendor shall reference the front-end specifications of the architectural contract
documents for the construction of the building or space and comply with the
general conditions detailed therein.
20.
Confidentiality
1. This RFP is both confidential and propriety to Owner and the Owner reserves the
right to recall the RFP in its entirety or in part. Vendors shall return (or destroy at
Owner’s direction) all originals and copies of the RFP upon Owner’s request. At all
times, this RFP shall be deemed to be the property of the Owner. Vendors must not,
and agree that they will not, duplicate, distribute or otherwise disseminate or make
available this document or the information contained in it to a third-party without
the prior can written consent of Owner. Notwithstanding the foregoing, Vendors
may make this document available to those employees who have a need to know
its contents in order to participate in response to this RFP, and who are informed of
confidentiality restriction.
2. Without limiting the confidentiality and non-use obligations set forth in this RFP,
Owner may require that Vendors sign a detailed confidentiality and non-disclosure
agreement either prior to or subsequent to submitting a proposal.
3. Owner shall not be obligated to return the information and materials provided by
Vendor in connection with this RFP. If Vendor wishes any information that is
submitted in response to this RFP to be considered confidential and/or proprietary,
Owner must be advised of this in writing at the time the Proposal is submitted. Any
and all material that Vendor is to be considered and treated as confidential must
be clearly marked "confidential" and/or "proprietary property of [name of Vendor]"
prior to submission. Owner shall not be obligated to maintain the confidentiality of
any materials and information (i) are already in its possession, as evidenced by
records, prior to receipt or disclosure hereunder; (ii) is or becomes public
knowledge through no fault of Owner; (iii) is disclosed to client by a third-party who,
to Owner knowledge, is not bound by any confidentiality restriction and does not
bind Owner to such restriction; or (iv) is required to be disclosed by applicable law,
rule, regulation or judicial process.
4. Suppliers must accept all of the foregoing terms and conditions without exception.
Failure to comply with these provisions may serve to disqualify your proposal, and
Client deserves the right to pursue any right or remedy in law or at equity, including,
without limitation, injunctive relief.
5. No written publication or photographs will be allowed without the written approval
of Owner and Stantec. Owner and Stantec shall not be used as a reference for
any manufacturer, vendor, contractor or dealer without the prior written approval
from Owner and Stantec.
Proposal Award Criteria
Proposals will be evaluated and award will be based on the vendor’s ability to offer
the best value (productivity improvement, service, cost), and on anticipated
quality of service for the following principal elements:
• How well the Proposal meets the Owner’s needs.
• Cost, both furniture and installation (installation includes, but is not limited to,
unpacking, assembly, and locating the furniture to the appropriate space as
specified).
• Vendor’s relevant experience and reliability.
• Vendor references.
• Delivery and installation schedule and support.
• Work statement summary demonstrating a thorough understanding of
requirements and specifications.
• Assurance that the quality and functionality of the product is the same or equal
to the products specified in the bidding documents.
NOTE: Evaluation criteria are not stated in order of preference.
Vendor proposals will be reviewed and evaluated by the Owner with the
assistance of Stantec. If there are portions of any proposal the Owner finds
unacceptable or otherwise in need of clarification or revision, the Owner reserves
the right to negotiate with any or all Vendors.
References
Vendors are to furnish a minimum of three (3) qualified references to support their
proposals. References are to be from organizations that are not part of the
vendor’s organization and that closely parallel the needs stated in this RFP.
References shall be from organizations that have successfully utilized the products
and services which the Vendor has offered in its proposal(s).
The references supplied should include the name and address of the organization,
the name(s), titles, and the telephone numbers of the persons to be contacted and
a general scope of the product or services provided including the approximate
annual aggregate dollar volume involved.
Installation and Scheduling
1. The Vendor shall install all furniture using their own installation crew or shall identify
the name of the installation company in their proposal. Include appropriate
experience and reference information and union affiliation, if applicable, for the
same.
2. Dimensions supplied in these specifications and drawings are approximate. The
Furniture Vendor shall carefully check all dimensions and other conditions affecting
the work in the field and shall be responsible for proper installation in the required
areas.
3. Installers are required to “chalk” out all workstations, files and conference room
table bases to assist the general contractor in locating walls, demountable
partitions, aisle and electrical feed locations during the framing of the space.
4. Installers must coordinate final core locations and confirm furniture is in compliance
with applicable codes prior to commencing.
5. The Vendor/Installer will be responsible for the protection of Owner’s property
during the period of installation and shall exercise care to prevent damage to the
interior and the exterior of the buildings, lawns, trees, plant material, fences, walks,
drives, roadways, signs, light poles, utilities and other improvements in and adjacent
to the area of work. Damage to Owner’s property resulting from the
Vendor/Installer’s operations shall be repaired or replaced by the Vendor/Installer
without additional cost to the Owner.
6. The Owner reserves the right to identify the damages for “Immediate Repair”
resulting from the Vendor/Installer’s operations. Such damages will be repaired
within three working days, at the Vendor/Installer’s expense. If the Vendor/installer
fails to repair such damages within the three-day period, the Owner will proceed to
have the same repaired. The Vendor/Installer shall reimburse the Owner for the
same. Payments in the amount of the Owner’s expenditures for “Immediate
Repair” will be withheld until the Vendor/Installer has repaired all damages and has
made all reimbursements to the Owner.
7. A loading dock and an elevator is not available for vendor use to move furniture.
Wall and floor protection must be utilized and is the vendor responsibility to provide.
The furniture vendor must review the existing loading dock, freight elevator, and
freight elevator usage schedule and include any special handling if required in
their bid submission.
8. Each Vendor shall provide with their proposal response a schedule showing time
required completing installation plans, shop drawings, production runs, shipping
and complete delivery in a manner that coordinates with the construction and
occupancy of the project. Awarded vendor shall be responsible for schedule
coordination throughout the project.
9. The Vendor in conjunction with the Owner and General Contractor shall provide a
written plan of installation within 30 days of being awarded the project and graph
type schedule (MS Project) which will establish a flow and milestones of installation
at the site starting with the initial deliveries through final fine tuning and punch list.
The written plan and schedule will provide a description of stages, phases, major
activities, installation crew capacities installation activities. The schedule must
include point which electrician retained by the general contractor will be required
to finalize electrical connections and installation and termination of low voltage
voice/data cabling in systems furniture.
10. The Vendor shall confirm manufactures acknowledgements of purchase orders to
ensure accuracy, count and delivery, advise of any long lead times, and provide
information and viable alternatives.
11. The Vendor will monitor the fabrication and delivery of all specified items. Every
effort shall be made to assure that schedules will be met and that specifications
are being accurately followed.
12. The Vendor must provide updates on production status, lead times and COM status
and ship dates on all furniture items to the Owner and Stantec at a minimum of
every thirty (30) days from the point of award until forty-five (45) days before
delivery at which point attendance at weekly project meetings will be required.
Additional updates are required for all occurrences that may affect production
status and ship date regardless of the point in the schedule which they occur.
13. All COM fabrics shall be purchased, or placed on reserve, within 15 Business Days of
the issuance of the Owner’s purchase order. Vendor will furnish an
acknowledgement list that all COM fabrics have been coordinated.
14. The Vendor shall notify the Owner, Stantec, the general contractor and the project
team forty-five (45) days in advance of the date installation is to commence. At
this point the Vendor and project manager from the Owner contracted installation
team will be required to attend, at a minimum, weekly project meetings at the
project site.
15. The Vendor will be required to store furniture and furnishings if shipped earlier than
required per the construction schedule until the general contractor has completed
construction. The client will not pay for any storage if items are shipped early.
16. The Vendor shall ensure that all items delivered are in accordance with the
documents and shall notify the Manufacturer in the event of any discrepancies.
17. Damaged or defective furniture shall be replaced and/or repaired at no cost to
the Owner.
18. Freight charges are to be included in Vendor’s proposal. Freight to be FOB to the
Project Location. Arrangements for all freight charges must be made with the
Owner prior to shipping. Furniture may not be drop shipped without prior written
approval by the Owner. Installers must meet all trucks onsite and unload materials.
Owner is not responsible or costs incurred to redirect trucks due to schedule
changes.
19. The Vendor is responsible for material damage and loss until the installation is
complete and accepted by the Owner. Damage attributed to the Installer shall be
corrected by the Installer. The Owner will determine acceptance or rejection of
damaged items.
20. The Owner reserves the authority to stop work on a given segment of work or item
to ensure the proper interpretation and execution of the requirements of this
specification.
21. A representative of the Vendor must be onsite at all times for the duration of the
installation.
22. The on-site work to be performed under this purchase agreement will be
completed by the date indicated on the Schedule.
23. Unless otherwise agreed by the parties in writing, the date of substantial completion
of the work is the date determined by the Owner when all of the Specifications of
Work have been completed. Failure to achieve substantial completion shall not
prevent the Owner from using or occupying all or a portion of the project
workspace or the facility being altered, nor shall this usage or occupancy
constitute substantial completion.
24. The substantial completion date may be extended upon approval of the Owner.
25. Installer requirements:
• Furnish labor, incidental materials, equipment, supplies, and supervision to
receive, inspect, assemble, place, level and clean furniture in specified
locations in the Owner’s buildings, and to perform a complete installation of
items under this agreement.
• Identify one person, who shall act as liaison with the Owner and Stantec.
This individual must have the authority to make decisions on behalf of the
Installer.
• Ensure that all items are installed level, properly aligned and true, and
located as shown on the furniture plans.
• All packaging and protective coverings must be removed and seating
inspected for damage and dirt. Vendor is required to clean or replace any
soiled fabrics or finishes found prior to occupancy of the space by Owner.
Remove from the project waste materials and rubbish resulting from his work
and including packing cartons and other debris.
• Execute final cleaning just prior to acceptance of the entire work. Remove
all protective materials; clean all surfaces of dirt, smears, finger marks,
stickers, and all other contamination and foreign or extraneous matter.
• Installer shall leave chair operation instruction cards attached to task chairs
for removal by owner.
• Use cleaning agents and solvents which will not damage material and
finishes, as recommended for the purpose by the manufacturer of the
material to be cleaned.
• Inspect, test, lubricate, and adjust all operating hardware. Repair, or
replace defective or damaged parts, components, and other items at no
cost to the Owner.
• Vendor is responsible for removing their own trash from the site daily.
Dumpsters already onsite for construction purpose may not be used by the
vendor.
• The vendor is responsible for any furniture items damaged during the
process of installation.
Project Closeout
1. Provide operating and maintenance manuals as approved by each furniture
manufacturer or fabric manufacturer – one electronic (PDF) and two (2) hard
copies must be issued to the Owner after installation as outlined below.
• Product and Manufacturer contact information
• Maintenance Manuals
• Copies of Warrantees
• Wiring Diagrams (if applicable)
• Material Safety Manuals
2. The Manufacturer(s) shall provide the Owner after installation, with written
documentation which guarantees all items against defects in materials,
manufacture and workmanship for the item. Substantial completion shall not
relieve the Manufacturer from liability for such defects, and upon notification from
the Owner, the Manufacturer shall, by repair, replacement, or otherwise, return the
item in condition satisfactory to the Owner in every respect. Usual wear and tear
and results of accidents not chargeable to the Manufacturer and are exempted
from the requirements of this guarantee. Work completed due to this guarantee
shall be done without additional cost to the Owner. The products or workmanship
of any subcontractor are to be covered in the primary Vendor’s guarantee.
3. The Owner shall conduct a final inspection of merchandise ordered to assure that
all items meet specifications, are in new and undamaged condition, are
assembled or installed properly and placed in their properly designated locations.
4. After installation is complete, Stantec will send a punchlist of any incomplete,
missing, or damaged items to the Vendor. Vendor must submit a report of items
corrected no later than one month after the date of substantial completion.
Product Training
1. The Furniture Vendor is required, as part of the scope of this RFP, to provide
instruction to Client personnel for the proper use of ergonomic tools, seating,
lighting, storage components or systems. Furniture Vendor personnel and if required,
Furniture Manufacturer personnel specifically versed in the proper use of products,
shall be present on site for no less than ten business days of accumulated time and
to be scheduled by Client as Client sees fit. The total number of presentations
and/or instruction events and the size of groups of Client personnel is to be
determined by Client
General Specification Notes
1. Pricing for any systems furniture shall include panel to panel connections, code
required electrical components as required, and all brackets and hardware. The
labor required for electrical connections of the whip to activate the electrical system
at the building power demarcation [will be provided by the general contractor].
2. Dimensions supplied in these specifications and drawings are approximate. The
Vendor shall carefully check all dimensions and other conditions affecting the work in
the field and shall be responsible for proper installation in the required areas.
3. The detail layouts will define components within each workstation, office, room or
area. Detail drawings shall take precedence over floor plan graphics. However,
handling of like products shall be taken from the floor plan graphics and confirmed
by the Vendor with the architect prior to order placement by the Vendor with the
manufacturer. Every attempt has been made to fully identify the components and
accessories required for the workstations; however, all accessories, components and
hardware to affix, fully erect and complete these configurations are to be included in
this proposal, regardless of their inclusion.
4. The furniture floor plans will dictate orientation/handling. The Vendor is to field verify
all conditions and advises Stantec and the Owner of any conflict.
5. The specification documents in conjunction with the attached plans shall indicate
the design, finish, components and quality standards required. Proprietary
components shall be the manufacturer’s product or products which meet with the
performance requirements, sizes, shapes, finishes, and colors as shown and specified.
6. Manufacturer’s nameplates shall not be exposed on any item of furniture,
component, finish or hardware provided under this RFP or any future contracts or
orders.
7. All drawers and files to be locking. All locking elements shall be keyed alike per
workstation, office or conference/training room, but each office, workstation or
conference/training room shall be keyed differently.
All general files shall be keyed differently from each other. Provide four (4) master
keys per product family and plug pullers to Client at project completion. Two (2) keys
for each lock shall be provided to Client. All lock cylinders to be keyed to one master,
for all manufactures’ products in the entire project.
All drawers, overhead bins, files, wardrobes and similar items to be provided with
locks. Leave two (2) keys in each office and/or workstation for the end-user. Locks to
be steel/chrome finish. All extra keys are to be turned over to Client.
8. Drawer and file pedestals for all new products provided for the project shall be full
depth of work surfaces which they are beneath, unless noted otherwise, and shall be
provided with full extension extra heavy-duty glides. One convenience tray should
be provided for every pedestal containing a 6” box drawer.
9. Provide all connectors, end caps, top caps and variable height connectors required
for installation. Provide filler posts at all two way and three way connections. All
connectors shall be securely installed and in alignment. Filler posts show match trim of
panels in top cap paint color.
10. Electrical raceways for all products shall be provided with all components, grounding
systems and other appurtenances and shall comply with all U.L and ASTM standards
applicable to the type of product being provided, as allowed by local electrical
codes. All such costs are to be included in the RFP proposal response.
11. Provide telecommunications panel pathway and in-feed locations capable of
accepting minimum of eighteen Cat 6E cables at 40% fill capacity.
12. Each fabric and paint are to be from one dye lot. Any exception of this must be
reviewed and approved by Stantec.
Submittals
1. After award and specification of furniture, finishes and fixtures, following Submittals
will be required from the Vendor prior to order placement:
• Submit manufacturers’ data, including color graphic representations, written
descriptions, and installation instructions for each product specified.
• Include the manufacturer’s printed instructions and current recommendations
for storage procedures, protection, and final cleaning of the finished
installation.
• Shop drawings for all custom, modular millwork or modified from standard
products shown in the specifications attached to this RFP. Like products with
different orientation or handling must be separately and fully shown in shop
drawings. Submit anchoring details for all wall hung overhead interior
furniture.
• Submit not less than two (2) sets and one (1) Revit file to Stantec indicating
completely out of all systems, office and ancillary furniture accurately
showing all components, accessories, grommets, electrical and telecom
feeds, finishes and related items. For each type of office, workstation and
specialty areas of the Project provide large scale detailed plans and
isometrics of the rooms showing all furniture, components and accessories.
• Submit three (3) samples not less than 12 inches by 12 inches of each fabric,
paint, wood and laminate and three (3) 12 inch lengths of trim finish, properly
identified with the names of the Project, Vendor, Manufacturer and
identifying the specific location and product(s) where the finish is to be
applied and pattern direction.
• Fabric samples will be cuttings from the actual bolts of fabric which will be
shipped to the respective upholsterers unless Vendor guarantees the actual
field supplied products will match the samples provided. In the case of
specially designed fabrics, the manufacturer will submit to Stantec as many
samples as required to show the range within which the final project will fall.
Fabrics outside this range will not be accepted.
All submittals and fully dimensioned shop drawings shall be complete and submitted
to Stantec for formal review within ten (10) working days of contract award. All
submittal corrections shall be made and resubmitted within five (5) working days of
initial return.
The Vendor will not commence the shipment of any item until all related samples
have been reviewed and approved by Stantec.
Insurance Requirements
1. Prior to the commencement of installation, the Vendor and their Installation
Company shall obtain the following insurance, at its own expense, to be maintained
until the completion of the Work and Final Acceptance:
Your firm must submit a copy of your E&O Liability Policies.
The requirements below are the minimums that must be met.
i. Commercial General Liability Insurance (including broad-form contractual
liability and completed operations, explosion, collapse and underground
hazards) in the amount of $1,000,000 single limit.
ii. Comprehensive Automotive Liability Insurance, including hired and non-
owned vehicles, if any, in the amount of $1,000,000 single limit.
iii. Workman's Compensation Insurance in the amount of the statutory
maximum and employer’s liability insurance in the amount of $1,000,000.
iv. See insurance requirements in exhibits for further details.
2. The Landlord, Building Manager and Owner will require certificate of insurance
indicating the job site, additional insured and evidencing all required coverage, and
must be submitted to and approved by the Building Manager and Owner five (5)
business days prior to the commencement of any work.
3. All insurance policies shall expressly require THIRTY (30) DAYS written notice to the
Building Manager and Owner of the cancellation or material alteration of such
policy, and the Certificates of Insurance should so provide.
4. Vendors must provide Certificate of Insurance. During the life of the contract, the
Vendor shall maintain the type of insurance and the insurance limits stated in
Insurance Certificate.
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
FRONT END SPECIFICATIONS
ACCESSORIES
CHAIRS
LOUNGE
STORAGE
TABLES
WORKSTATIONS
*FINISHES SHOWN FOR REFERENCE ONLY. FINAL FINISH SELECTION AT POST BID AWARD*
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE WB-1
Mfr: Watson Furniture
Series:Etch Mobile Magnetic Whiteboard
Model: WEM204660Description: Etch Mobile Magnetic Markerboard
Include: Magnetic Marker Cup (Holds Eraser)WEMS031603
Size: 46"W x 20"D x 60"H
Finishes: Accent Color: Standard Powder
Sales Rep: Julie Greenfield Email: [email protected]
x Office Phone: 248.497.2445
Total Quantity 3Rooms A101 | Open Tutoring Space: 3
x
WB 1 | MOBILE WHITEBOARDACCESSORIES
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
FRONT END SPECIFICATIONS
ACCESSORIES
CHAIRS
LOUNGE
STORAGE
TABLES
WORKSTATIONS
*FINISHES SHOWN FOR REFERENCE ONLY. FINAL FINISH SELECTION AT POST BID AWARD*
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE C-1
Mfr: Steelcase Series: Series 1 Work Chair
Model: 435A00Description: Upholstered Task Chair with Mesh
BackHard Casters Adjustable Height Lumbar, Arm Cap, Seat Height, Seat Depth, Arm Height, Arm Width, Arm Depth
Size: 23.5" - 27"W x 21" - 23.75"D x 36.5" - 41.25"H
Finishes: Seat Upholstery: Fabric Price Group 3Mesh Back: 3D Micro Knit Back: Platinum Solid Frame & Base: SeagullArm: SeagullCaster: Black
Sales Rep: Lynne Gochenour Email: [email protected]
x Cell Phone: 419.345.0078
Total Quantity 49Rooms A149 | Collaboration: 1
x A162 | Workroom: 4A158-A161 | Offices: 4 A150-A153 | Offices: 4A155-A157 | Offices: 3A103 | Elearning Office: 1 A100 | Welcome Desk & Tutoring Reception: 4A108 | Workroom: 4A109 | Office: 1A117 | Testing Reception: 3A112-A115 | Offices: 4A143 | Classroom: 1A139 | Classroom: 1B120 | Classroom: 1B115-B116 | Offices: 2B113-B114 | Classrooms: 2B134 | Office: 1B130 | Classroom: 1B123 | Office: 2B100-B102 | Classroom: 3B108 | Art Studio: 1B105 | Classroom: 1
C 1 | OFFICE CHAIRCHAIRS
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE C-2
Mfr: Steelcase Series: Move 490 Series Multi-Use Chair
Model: 490410CDescription: Multi-Use Chair w/ Upholstered Seat
Armless No CastersGlides
Size: 25.75"W x 20.25"D x 31.5"H
Finishes: Seat Upholstery: Fabric Price Group 3Frame: Platinum Metallic Back Shell: Arctic White
Sales Rep: Lynne Gochenour Email: [email protected]
x Cell Phone: 419.345.0078
Total Quantity 55Rooms A158-A161 | Offices: 9
x A150-A153 |Office: 8A155-A157 | Office: 8A112-A115 | Offices: 16A109 | Offices: 2A107 | Meeting Room: 4B134 | Office: 2B123 Office: 2B115 & B116 | Office: 4
C 2 | GUEST CHAIRCHAIRS
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE C-3
Mfr: Herman Miller Series: Setu Chair
Model: CQ51MDescription: Multipurpose Chair
Ribbon Arms5 Star Base, High Height Range Lyris 2 Suspension Seat and Back
Size: 25.125"W x 17.25"D x 37.125" - 38.375" H
Finishes: Suspension Material: Interweave 2Frame: Fog Base: Fog
Sales Rep: Marisa BoedekerEmail: [email protected]
x Phone: 248.990.8705
Total Quantity 53Rooms A154 | Workroom: 12
x A146 | Study: 7A147 | Study: 7A103 | E-Learning Office: 4A162 | Workroom: 3C105 | Small Study: 4C106 | Small Study: 4C108 | Small Study: 4C109 | Small Study: 4B135 | Conference: 4
C 3 | MULTIPURPOSE CHAIRCHAIRS
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE C-4
Mfr: Herman Miller Series: Setu Stool
Model: CQ52MDescription: Multipurpose Stool
Ribbon Arms5 Star Base, High Height Range Lyris 2 Suspension Seat and Back
Size: 25.125"W x 17.75"D x 43.375" - 51.163" H
Finishes: Suspension Material: Interweave 2Frame: Fog Base: Fog
Sales Rep: Marisa BoedekerEmail: [email protected]
x Phone: 248.990.8705
Total Quantity 27Rooms A108 | Workroom: 8
x A148 | Study: 7B133 | Open Work Area: 8B132 | Office: 4
C 4 | MULTIPURPOSE STOOLCHAIRS
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE C-5
Mfr: Steelcase
Series:Cobi 434 Series Collaborative Task Chair
Model: 434110Description: Mesh Flex Back w/ Upholstered Seat
360 Degree Swivel TiltArmlessPneum+C61atic Height AdjustablePlastic 5-Star Base Standard Cylinder
Size: 24.75"w x 23.25"d x 39"h, 15.5-20.5"sh
Finishes: Frame/Base Color: PlatinumUpholstery: Fabric Grade 3
Sales Rep: Lynne Gochenour Email: [email protected]
x Cell Phone: 419.345.0078
Total Quantity 75Rooms A101 | Open Tutoring Space: 3
x A102 | Open Computer Space: 18A105 | Media Studio: 2A106 | Media Studio: 2A120 | Testing: 2A121 | Testing: 2A123 - A132 | Testing: 10B130 | Classroom: 36
C 5 | TASK CHAIRCHAIRS
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE C-6
Mfr: Steelcase
Series:Cobi 434 Series Collaborative Task Stool
Model: 434710Description: Task Stool
Mesh flex back w/ upholstered seat360 degree swivel tiltArmlessPneumatic height adjustablePlastic 5-star base standard cylinder
Size: 24.75"W x 23.25"D x 21" - 31" H
Finishes: Frame/Base Color: PlatinumUpholstery: Fabric Grade 3
Sales Rep: Lynne Gochenour Email: [email protected]
x Cell Phone: 419.345.0078
Total Quantity 8Rooms A102 | Open Computer Space: 8
x
C 6 | TASK STOOLCHAIRS
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE C-7
Mfr: SteelcaseSeries: Move 490 Series Multi-Use Chair
Model: 490410CDescription: Multi-Use Chair w/ Upholstered Seat
Armless Casters
Size: 25.75"W x 20.25"D x 31.5" H
Finishes: Seat Upholstery: Fabric Price Group 3Frame: Platinum MetallicBack Shell: Arctic White
Sales Rep: Lynne Gochenour Email: [email protected]
x Cell Phone: 419.345.0078
Total Quantity 32Rooms A101 | Tutoring: 24
x C107 | Open Collaborative Seating: 8
C 7 | MULTI-USE CHAIRCHAIRS
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE C-8
Mfr: SitOnItSeries: Lumin Light Task Chair
Model:Description: Lumin Light Task Chair
ArmlessUpholstered Seat with Plastic BackTask with Basic MechanismSelf Locking Carpet Casters Note: Fully Assembled in a Carton
Size: 27"W x 27"D x 31.9" - 36.9" H
Finishes: Frame & Back: Standard Color Base: Silver Seat Upholstery: Fabric Grade 3
Sales Rep: Michael CirannaEmail: [email protected]
x Office Phone: 248.745.9990
Total Quantity 54Rooms B100 | Classroom: 18
B101 | Classroom: 20B136 | Classroom: 16
C 8 | CLASSROOM CHAIRCHAIRS
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE C-9
Mfr: SitOnItSeries: Lumin Stool
Model:Description: Lumin Light Task Stool
ArmlessUpholstered Seat with Plastic BackTask Stool with Basic MechanismSelf Locking Carpet Casters Note: Fully Assembled in a Carton
Size: 27"W x 27"D x 37.9" - 45.9" H/ 41.9" - 51.9"
Finishes: Frame & Back: Standard Color Base: Silver Seat Upholstery: Fabric Grade 3
Sales Rep: Michael CirannaEmail: [email protected]
x Office Phone: 248.745.9990
Total Quantity 30Rooms B100 | Classroom: 18
B101 | Classroom: 12
C 9 | CLASSROOM STOOLCHAIRS
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE C-10
Mfr: Erg InternationalSeries: Carlton Guest Chair
Model: 8710Description: Carlton 4-Leg Guest Chair
Size: 24.5"W x 22.5"D x 33.5" H
Finishes: Frame: Powder Coat Back Upholstery: COMSeat Upholstery: COM
COM Allowance: $50/YD
Sales Rep: Rick AllorEmail: [email protected] Phone: 313.258.1727
Total Quantity 6Rooms A149 | Collaboration: 2
A116 | Waiting: 4
C 10 | GUEST CHAIRCHAIRS
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE C-11
Mfr: Erg InternationalSeries: Vesper Demi Back Bar Stool
Model: 6190Description: Vester Demi Back Sled - Bar Stool
Fully Upholstered
Size: 18.5"W x 19"D x 37" H
Finishes: Seat Upholstery: Fabric Group 3Base: Powder Coat
Sales Rep: Rick AllorEmail: [email protected]
x Office Phone: 313.258.1727
Total Quantity 32Rooms A149 | Collaboration: 4
C107 | Collaborative Seating Area: 16C103 | Study Alcove: 2C104 | Study Alcove: 2C111 | Study Alcove: 2C112 | Study Alcove: 2C113 | Study Alcove: 2C114 | Study Alcove: 2
C 11 | STOOLCHAIRS
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE C-12
Mfr: EncoreSeries: Chirp Guest Chair, Wood Legs
Model: 30114Description: Chirp Guest Chair, Wood Legs
Fully Upsholstered Seat and Felt Glides
Size: 20.5"W x 23"D x 31.75" H
Finishes: Wood Base: BeechBack Upholstery: COMSeat Upholstery: COM
COM Allowance: $50/YD
Sales Rep: Michael CirannaEmail: [email protected]
x Office Phone: 248.745.9990
Total Quantity 6Rooms B132 | Office: 6
C 12 | GUEST CHAIRCHAIRS
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
FRONT END SPECIFICATIONS
ACCESSORIES
CHAIRS
LOUNGE
STORAGE
TABLES
WORKSTATIONS
*FINISHES SHOWN FOR REFERENCE ONLY. FINAL FINISH SELECTION AT POST BID AWARD*
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE L 1
Mfr: KimballSeries: Joelle Ottoman
Model: K92BWRO2018UDescription: Joelle | Behavorial Wellness Round
Ottoman with Upholstered TopDecorative Stitching
Size: 18"H, 20"DIA
Finishes: Top Fabric: COMSide Fabric: COMThread Color: STD Color
COM Allowance: $50/YD
Sales Rep: Kelli DeLaRosaEmail: [email protected]
x Office Phone: 586.651.7795
Total Quantity 11Rooms C107 | Collaborative Seating: 2
x A146 | Study: 3A147: Study: 3A148: Study: 3
L 1 | OTTOMANANCILLARY
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE L 2
Mfr: SteelcaseSeries: Brody 488 Series
Model:488WP / 488FR
Description: Brody Privacy Lounge with Footrest Personal Worksurface Privacy ScreenSide Surface
Size: Privacy Lounge: 43"W x 36"D x 42.5"HFootrest: 18" DIA x 10" H
Finishes: Lower Surround Upholstery: COMSeat Upholstery: COMScreens: Acrylic
COM Allowance: $50/YD
Sales Rep: Lynne Gochenour Email: [email protected]
x Cell Phone: 419.345.0078
Total Quantity 2Rooms B133 | Open Work Area: 2
x
L 2 | LOUNGEANCILLARY
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE L 3
Mfr: CoalesseSeries: Massaud
Model: COMCWLDescription: Maussaud Work Lounge Chair with
Tablet Arm Pivoting Tablet is Fixed at a Height of 1-7/8"
Size: 41.03"W x 33"D x 41.03" Ho Bottom of Tablet: 6.5"H
Finishes: Uphostery Grade: COMTablet Finish: STD
COM Allowance: $50/YD
Sales Rep: Allison KaulfussEmail: [email protected]
x Office Phone: 248.765.9874
Total Quantity 4Rooms C101 | Corridor: 4
x
L 3 | LOUNGEANCILLARY
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE L 4
Mfr: CoalesseSeries: Joel Lounge Chair
Model: COWK100Description: Upholstered Lounge Chair
Swivel Return Base
Size: 30.25"W x 29"D x 27.5" H
Finishes: Seat Upholstery: COMBack Upholstery: COM
COM Allowance: $75/YD
Sales Rep: Allison KaulfussEmail: [email protected]
x Office Phone: 248.765.9874
Total Quantity 2Rooms C107 | Collaborative Seating Area: 2
L 4 | LOUNGEANCILLARY
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE L 5
Mfr: ArcadiaSeries: Uptown Social Modular Sofa
Model: See BelowDescription: Uptown Social Lounge Modular Sofa
1 Lot Includes:L5A | Armless 3-Seater Sofa with 4" Arm, Left Side as seated L5B | Corner Unit L5C | Single Seat Lounge with Right Bench
L5A: Sofa, Armless | 5103-4RA
Size: 75"W x 31.75"D x 31" HFinishes: Upholstery: Grade 3
Quantity: 1L5B: Corner Unit | 5104
Size: 31"W x 31"D x 31" HFinishes: Upholstery: Grade 3
Quantity: 1
LC5:Single Seat Lounge with Right Bench | 5111-BR
Size: 50"W x 31.75"D x 31" HFinishes: Upholstery: Grade 3
Quantity: 1Standard Leg
Finish:
Sales Rep: Michael CirannaEmail: [email protected]
x Office Phone: 248.745.9990
Total Quantity 1Rooms C107 | Collaborative Seating Area: 1
L 5 | LOUNGEANCILLARY
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
FRONT END SPECIFICATIONS
ACCESSORIES
CHAIRS
LOUNGE
STORAGE
TABLES
WORKSTATIONS
*FINISHES SHOWN FOR REFERENCE ONLY. FINAL FINISH SELECTION AT POST BID AWARD*
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE S-1
Mfr: Salsbury Industries Series: 60" Wide Mobile Wire Shelving
Model: 9554MDescription: 9500M Series 60" Wid Mobile Wire
Shelving 4 Heavy Duty 5" Locking Casters Includes 4 Posts with Locking Casters 4 Adjustable Shelves
Size: 60"W x 24"D x 69"H
Finishes: Finish: Chrome
Sales Rep:Email: [email protected]
x Office Phone: 1.800.562.5377
Total Quantity 12Rooms A163 | Workshop: 12
x
S 1 | WIRE SHELVINGSTORAGE
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE S-2
Mfr: Jorgenson Lockers Series: Jorgenson Signature
Model:Description: 6 Tier Industrial Lockers
Louvered6" Legs Includes a Zephyr Electronic Locker System with Keyback (#2254) for Keypad Programming for Temporary Users Note: Purchase a control card and manager card with the lock
Size: 12"W x 18"D x 12"H (78"TH)
Finishes: Locker Finish: Dusty Gray 416
Sales Rep: Lino VelardeEmail: [email protected]
x Office Phone: 810.214.7337
Total Quantity 10Rooms A118 | Circulation: 10
S 2 | LOCKERSSTORAGE
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE S-3
Mfr: MontisaSeries: Oscar
Model: 442Description: 42" Wide Solid Filing Cabinet
4 Stacked UnitsUnit Style without a lock
Size: 42"W x 19.5"D x 53"H
Finishes: Unit Color: Astro Grey M17
Sales Rep: Lynne Mitchell Email: [email protected]
x Office Phone: 651.216.9664
Total Quantity 10Rooms A110 | Storage: 10
S 3 | LATERAL FILESSTORAGE
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE S-4
Mfr: MontisaSeries: Oscar
Model: 242LDescription: 42" Wide Solid Filing Cabinet
2 Stacked UnitsUnit Style with a Lock
Size: 42"W x 19.5"D x 26.5"H
Finishes: Unit Color: Astro Grey M17
Sales Rep: Lynne Mitchell Email: [email protected]
x Office Phone: 651.216.9664
Total Quantity 6Rooms A111 | Circulation: 3
A101 | Open Tutoring Space: 3
S 4 | LATERAL FILESSTORAGE
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
FRONT END SPECIFICATIONS
ACCESSORIES
CHAIRS
LOUNGE
STORAGE
TABLES
WORKSTATIONS
*FINISHES SHOWN FOR REFERENCE ONLY. FINAL FINISH SELECTION AT POST BID AWARD*
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE T-1
Mfr: SteelcaseSeries: Verb Chevron Table with Casters
Model:Description: Verb Chevron Classroom Table with
Locking Casters
Size: 60"W x 30"D x 28.5" H
Finishes: Laminate Top: Grade 2Plastic Edge Band Color: TBDLegs Paint Color: Platinum MetallicCaster Color: Black
Sales Rep: Lynne Gochenour Email: [email protected]
x Cell Phone: 419.345.0078
Total Quantity 19Rooms B100 | Classroom: 9
B101 | Classroom: 10
T 1 | CLASSROOM TABLETABLES
*Image for reference only
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE T-2
Mfr: SteelcaseSeries: Verb Rectangle Table
Model: VTR3060Description: Verb Rectangle Classroom Table
with Locking Casters
Size: 60"W x 30"D x 28.5" H
Finishes: Laminate Top: Grade 2Plastic Edge Band Color: TBDLegs Paint Color: Platinum MetallicCaster Color: Black
Sales Rep: Lynne Gochenour Email: [email protected]
x Cell Phone: 419.345.0078
Total Quantity 8Rooms B136 | Classroom: 8
T 2 | CLASSROOM TABLETABLES
*Image for reference only
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE T-3
Mfr: Steelcase
Series:Verb Rectangle Standing Height Table
Model: VTR3060Description: Verb Rectangle Standing Height
Table with Casters
Size: 60"W x 30"D x Adjustable Standing Height
Finishes: Laminate Top: Grade 2Plastic Edge Band Color: TBDLegs Paint Color: Platinum Metallic
Caster Color: Black
Sales Rep: Lynne Gochenour Email: [email protected]
x Cell Phone: 419.345.0078
Total Quantity 15Rooms B100 | Classroom: 9
B101 | Classroom: 6
T 3 | CLASSROOM TABLETABLES
*Image for reference only
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE T-4
Mfr: Herman MillerSeries: Everywhere Rectangle Table
Model: DT1AE3060Description: Everywhere Rectangle Seated
Height Table with GlidesLaminate Top with Metal Legs
Size: 60"W x 30"D x 28.5"H
Finishes: Laminate Top: Grade 2Plastic Edge Band Color: TBDLegs Paint Color: Platinum MetallicEdge: Eased
Sales Rep: Marisa BoedekerEmail: [email protected]
x Phone: 248.990.8705
Total Quantity 17Rooms A123-A132 | Testing: 10
A120 & A121 | Testing: 4A101 | Open Tutoring Space: 3
T 4 | MULTI-USE TABLETABLES
*Image for reference only
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE T-5
Mfr: Herman MillerSeries: Everywhere Rectangle Table
Model: DT1AE3060Description: Everywhere Rectangle Seated
Height Table with Casters Laminate Top with Metal Legs
Size: 60"W x 30"D x 28.5"H
Finishes: Laminate Top: Grade 2Plastic Edge Band Color: TBDLegs Paint Color: Platinum MetallicEdge: Eased
Sales Rep: Marisa BoedekerEmail: [email protected]
x Phone: 248.990.8705
Total Quantity 10Rooms A101 | Open Tutoring Space: 8
A105 | Media Studio: 1A106 | Media Studio: 1
T 5 | MULTI-USE TABLETABLES
*Image for reference only
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE T-6
Mfr: Herman MillerSeries: Everywhere Square Table
Model: DT1AE3636Description: Everywhere Square Seated Height
Table with Casters Laminate Top with Metal Legs
Size: 36"W x 36"D x 28.5"H
Finishes: Laminate Top: Grade 2Plastic Edge Band Color: TBDLegs Paint Color: Platinum MetallicEdge: Eased
Sales Rep: Marisa BoedekerEmail: [email protected]
x Phone: 248.990.8705
Total Quantity 2Rooms A101 | Open Tutoring Space: 2
T 6 | MULTI-USE TABLETABLES
*Image for reference only
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE T-7A
Mfr: SteelcaseSeries: Verb Media Table
Model:Description: Verb Media Rectangle Active
Learning Classroom Table with Locking Casters Power/USB included
Size: 72"W x 60"D x 28.5"H
Finishes: Laminate Top: Grade 2Plastic Edge Band Color: TBDLegs Paint Color: Platinum MetallicEdge: Eased
Sales Rep: Lynne Gochenour Email: [email protected]
x Cell Phone: 419.345.0078
Total Quantity 6Rooms B130 | Classroom: 6
T 7A | ACTIVE LEARNING TABLETABLES
*Image for reference only (No pucks or data connection needed)
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE T-7B
Mfr: Steelcase Series: Verb Media Table
Model:Description: Verb Media D Shape Table
D-Shape with Clamp on Power Desktop Outlet (2 Outlets / 2 USB)Locking Casters
Size: 60"/78"-AL x 28.5"H
Finishes: Worksurface: HPL Grade 2Plastic Edge Band Color: TBDLegs Paint Color: Platinum Metallic Edge: Eased
Sales Rep: Lynne Gochenour Email: [email protected]
x Cell Phone: 419.345.0078
Total Quantity 3Rooms B135 | Conference: 1
A103 | E-Learning Office: 1A162 | Workroom: 1
T 7B | MEDIA TABLETABLES
*Image for reference only
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE T-8
Mfr: SteelcaseSeries: Verb Media Table
Model:Description: Verb Media Pear Shaped Seated
Height Table with Casters Power/USB included *Monitors to be mounted on walls
Size: 60"W x 60"D x 28.5"H
Finishes: Worksurface: HPL Grade 2Plastic Edge Band Color: TBDLegs Paint Color: Platinum Metallic Edge: Eased
Sales Rep: Lynne Gochenour Email: [email protected]
x Cell Phone: 419.345.0078
Total Quantity 4Rooms C105 & C106| Small Study: 2
C108 & C109 | Small Study: 2
T 8 | CONFERENCE TABLETABLES
*Image for reference only
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE T-9
Mfr: EnworkSeries: Team Landing Table
Model: NEL4896Description: Team Landing Table
One Power and Data Cut OutEllora Double Sided Power Trough(PDE834AR) 8 Power/2 Circuit Breakers/4 Data Openings/4 Charging USB Clear Aluminum w/ Black Interior (2) 10' Power Cords(4) Universal Cable Gripper
NOTE: Vendor to provide shop drawings to owner and AV Consultant for location approval
Size: 96"W x 48"D x 42"H
Finishes: Outer Shell Laminate: Grade 2Inner Shell Laminate: Grade 2Edge Band: TBDEdge Detail: 3MM
Sales Rep: Rick AllorEmail: [email protected]
x Office Phone: 313.258.1727
Total Quantity 4Rooms C107 | Collaborative Seating Area: 2
A102 | Open Computer Space: 2
T 9 | LANDING TABLETABLES
*Image for reference only
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE T-10
Mfr: EnworkSeries: Team Landing Table
Model: NEL4896Description: Team Landing Table
No Power/Data
Size: 96"W x 48"D x 42"H
Finishes: Outer Shell Laminate: Grade 2Inner Shell Laminate: Grade 2Edge Band: TBDEdge Detail: 3MM
Sales Rep: Rick AllorEmail: [email protected]
x Office Phone: 313.258.1727
Total Quantity 2Rooms C107 Collaborative Seating Area: 2
T 10 | LANDING TABLETABLES
*Image for reference only
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE T-11
Mfr: EnworkSeries: Sawhorse Square Table
Model:Description: Sawhorse Square Table
No Power/Data
Size: 42"W x 42"D x 29"H
Finishes: Table Top Finish: Grade 2Base Finish: Grade 2 Edge Profile: Knife
Sales Rep: Rick AllorEmail: [email protected]
x Office Phone: 313.258.1727
Total Quantity 9Rooms A157 | Office:1
A158 | Office:1A112-A115 | Office: 4A107 | Meeting: 1C107 | Collaborative Seating Area: 2
T 11 | MEETING TABLETABLES
*Image for reference only
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE T-12
Mfr: EnworkSeries: Sawhorse Rectangle Table
Model:Description: Sawhorse Rectangle Table
Power ad Data (2) Double Sided Ellora Units (4 Power/4 Data Openings)Daisy Chained with (1) 72" Hardwire InfeedFlush Fit Door with Cable Drop Space Includes (2) 10 Foot, 20 AMP Power Cords for Double Sided Units Datacom Adapter Kit Included
Size: 48"W x 180"D x 29"H
Finishes: Table Top Finish: Grade 2 Base Finish: Sterling Metallic Edge Profile: Knife
Sales Rep: Rick AllorEmail: [email protected]
x Office Phone: 313.258.1727
Total Quantity 1Rooms A154 | Workroom: 1
T 12 | CONFERENCE TABLETABLES
*Image for reference only
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE T-13
Mfr: EnworkSeries: Sawhorse Rectangle Table
Model:Description: Sawhorse Rectangle Table
No Power/DataSawhorse leg base
Size: 48"W x 96"D x 29"H
Finishes: Table Top Finish: Grade 2 Base Finish: Sterling Metallic Edge Profile: Knife
Sales Rep: Rick AllorEmail: [email protected]
x Office Phone: 313.258.1727
Total Quantity 1Rooms B132 | Office: 1
T 13 | CONFERENCE TABLETABLES
*Image for reference only
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE T-14
Mfr: NationalSeries: Footings Collaborative Table
Model:Description: 48"x96" Footings Collaborative Soft
Rectangle Table Y-Bases with Rail - Worksurface HeightSoftened Rim(2) Round Electrical Grommets with Power and DataColumn Wire Management
Size: 48"W x 96"D x 29"H
Finishes: Table Top Finish: Grade 2 Base Finish: Sterling Metallic Edge Finish: Softened PVC Rim
Sales Rep: Lynne Gochenour Email: [email protected]
x Cell Phone: 419.345.0078
Total Quantity 2Rooms A147 | Study: 1
A146 | Study: 1
T 14 | COLLABORATIVE TABLETABLES
*Image for reference only
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE T-15
Mfr: NationalSeries: Footings Collaborative Table
Model:Description: 48"x96" Footings Collaborative Soft
Rectangle Table Y-Bases with Rail - Counter Height Softened Rim(2) Round Electrical Grommets with Power and DataColumn Wire Management
Size: 48"W x 96"D x 34.875"H
Finishes: Table Top Finish: Grade 2 Base Finish: Sterling Metallic Edge Finish: Softened PVC Rim
Sales Rep: Lynne Gochenour Email: [email protected]
x Cell Phone: 419.345.0078
Total Quantity 1Rooms A148 | Study: 1
T 15 | CONFERENCE TABLETABLES
*Image for reference only
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE T-16
Mfr: Erg InternationalSeries: Dalma
Model: DALH36SDescription: Dalma Bar Height Square Top Table
24" Square Base
Size: 36"W x 36"D x 42"H
Finishes: Table Top Finish: Std LaminateBase Finish: Sterling Metallic
Sales Rep: Rick AllorEmail: [email protected]
x Office Phone: 313.258.1727
Total Quantity 12Rooms C103-C104 | Study Alcove: 4
C111-C114 | Study Alcove: 8
T 16 | CONFERENCE TABLETABLES
*Image for reference only
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE T-17
Mfr: Erg InternationalSeries: Marlo Round Occasional Table
Model: MAR30DDescription: Marlo Round Occasional Table
Size: 30" Dia, 20"H
Finishes: Laminate: Grade 2 Base: Powder Coat
Sales Rep: Rick AllorEmail: [email protected]
x Office Phone: 313.258.1727
Total Quantity 3Rooms A116 | Waiting: 2
A149 | Collaboration: 1
T 17 | OCCASIONAL TABLETABLES
*Image for reference only
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE T-18
Mfr: Erg InternationalSeries: Hermosa Round Occasional Table
Model: HER36DDescription: Hermosa Round Occasional Table
Size: 36" Dia, 15"H
Finishes: Laminate Top: Grade 2Base: Powder Coat
Sales Rep: Rick AllorEmail: [email protected]
x Office Phone: 313.258.1727
Total Quantity 2Rooms C107 | Collaborative Seating Area: 2
T 18 | OCCASIONAL TABLETABLES
*Image for reference only
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE T-19
Mfr: TurnstoneSeries: Bivi Team Table
Model:Description: Steel/Structural Bench System with
Power/Data AccessHPL Worksurfaces 42" H Standing Height ApplicationIntegrated Foot Rail60" Wide Transaction Counter at End Bivi Table - Plus Two Depth 1: 30"Depth 2: 30"Width: 48"
8 Power/2 Circuit Breakers/4 Data Openings/4 Charging USB Clear Aluminum w/ Black Interior
Size: Refer to Drawings | 9'-7" Overall
Finishes: Laminate Top: Grade 2Base: Powder Coat Edge: Eased
Sales Rep: Lynne Gochenour Email: [email protected]
x Cell Phone: 419.345.0078
Total Quantity 3Rooms B133 | Open Work Area: 2
B132 | Office: 1
T 19 | TEAM TABLETABLES
*Image for reference only
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE T-20
Mfr: ErgotronSeries: LearnFit Sit-Stand Desk, Tall
Model: 24-481-003Description: LearnFit Sit-Stand Desk, Tall
Mobile Desk
Size: 24"W x 22"D x 34.6" - 50.8" H
Finishes: Laminate Top: STD Color Base: Silver
Sales Rep: Josh Sizemore Email: [email protected]
x Phone: 614.719.9699
Total Quantity 11Rooms A143 | Classroom: 1
A139 | Classroom: 1B105 | Classroom: 1B102 | Classroom: 1B101 | Classroom: 1B100 | Classroom: 1B108 | Art Studio: 1
B114 | Classroom: 1 B120 | Classroom: 1B130 | Classroom: 1
**Check to see if there will be a new podium in group testing
T 20 | STANDING DESKTABLES
*Image for reference only
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE T-21
Mfr: Steelcase Series: Answer Beam
Model:Description: Steel/Structural Beam with
Power/Data AccessDesktop Power/Data Module (2 Outlets/2 USB each)13.5"Hx36"W Tackable ScreensMetal Tapered Legs9" H Open Base
Size: Refer to Drawings
Finishes: Laminate Top: Grade 2 Laminate Leg Finish: Grade 2 MetalBeam Finish: Buzz2
Sales Rep: Lynne Gochenour Email: [email protected]
x Cell Phone: 419.345.0078
Total Quantity 3Rooms A102 | Open Computer Space: 3
T 21 | COMPUTER STATIONTABLES
*Image for reference only
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
FRONT END SPECIFICATIONS
ACCESSORIES
CHAIRS
LOUNGE
STORAGE
TABLES
WORKSTATIONS
*FINISHES SHOWN FOR REFERENCE ONLY. FINAL FINISH SELECTION AT POST BID AWARD*
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE WKS-1
Mfr: Steelcase Series: Currency
Model:Description: All Laminate Construction/HPL
Worksurfaces 48" Wall Mounted Overhead Bin48" Tackboard & Dash Task Light 30"x60" Desk with Full Modesty & 30" BBF24"x48" Returns with FFLaminate Bookcase
Size: 30" x 60" Desk with Full Modesty24"x48" Returns with FF36"x72" Laminate Bookcase
Finishes: Laminate Worksurface: Grade 2Laminate Surround: Grade 2Laminate Pedestal Finish: Grade 2Bookcase Finish: Grade 2Hardware: Standard
Sales Rep: Lynne Gochenour Email: [email protected]
Cell Phone: 419.345.0078
Total Quantity 18Rooms A150-A153 | Office: 4
A155-A157 | Office: 3A112-A115 | Office: 4A103 | E-Learning Office: 1A109 | Office: 1B134 | Office: 1B123 | Office: 2B115-B116 | Office: 2
WKS 1 | TYPICAL FACULTY OFFICESWORKSTATIONS
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE WKS-2
Mfr: Steelcase Series: Universal Laminate
Model:Description: Steel Structure & Supports
Laminate Storage, Full Extension Drawers with Laminate TopsHPL Worksurfaces Tapered Medtal Legs Desktop Power Data Module (2 Outlets/2 USB Each)72"W Overhead Storage
Size: 24"x72"x48" Corner Worksurface 24"x36" Worksurface Extension30"x114" Return72" W Overhead Storage
Finishes: Laminate Worksurface: Grade 2Laminate Surround: Grade 2Laminate Pedestal Finish: Grade 2Hardware: Standard
Sales Rep: Lynne Gochenour Email: [email protected] Phone: 419.345.0078
xTotal Quantity 4
Rooms A158-A161 | Office: 4
WKS 2 | IT FACULTY OFFICES WORKSTATIONS
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE WKS-3
Mfr: Steelcase Series: Universal Laminate
Model:Description: Steel Supports Under Structure
HPL Worksurfaces2 Desktop Power Data Modules (2 Outlets/2 USB each)24" D Laminate BFF and 2 DWR Lateral FileFreestanding Application
Size: 24"x72"x48" Corner Worksurface 24"x40" Worksurface Extension30"x117" Return36" W Lateral File Cabinet
Finishes: Laminate Worksurface: Grade 2Laminate Surround: Grade 2Laminate Pedestal Finish: Grade 2Hardware: Standard
Sales Rep: Lynne Gochenour Email: [email protected]
x Cell Phone: 419.345.0078
Total Quantity 4Rooms A162 | Workroom: 4
WKS 3 | IT FACULTY OFFICESWORKSTATIONS
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE WKS-4
Mfr: Steelcase Series: Universal Laminate
Model:Description:
Steel Structure & Supports Laminate Storage, Credenza with Drawers on Left and Open on Right with Laminate Tops24"x60" HPL Worksurfces HPL Worksurfaces Tapered Metal LegsDesktop Power Data Module (2 outlets/2 USB Each)
Size: 24"x60" Worksurface60"x22-11/32"x18-7/8" Credenza
Finishes: Laminate Worksurface: Grade 2Painted Metal Finish: Grade 2Laminate Pedestal Finish: Grade 2Hardware: Standard
Sales Rep: Lynne Gochenour Email: [email protected]
x Cell Phone: 419.345.0078
Total Quanity 4Rooms A108 | Workroom: 4
WKS 4 | BENCHINGWORKSTATIONS
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072
MCCC EAST/WEST TECHNOLOGY BUILDING RENOVATION AND ADDITIONAL PROJECT | FFE SPECIFICATIONS
ITEMPACKAGE
CODE WKS-5
Mfr: FormaSpace Series: Benchmarx Lan Unit
Model: FBM-C1006673-2Description:
Size: 84"W x 30"D x 36"H
Finishes: Black Semi-Gloss | BK266
Sales Rep: Andrea MullaneyEmail: [email protected]
x Office Phone: 512.520.1668
Total Quanity 4Rooms A162 | Workroom: 4
CRS WorksurfaceTotal Lock Casters HD FrameFRM ASSY HYD LEGB 2.0 SQ x 83.0 x 29.0 x 29.5BLK SEMIGLS SMCaster Total Lock 4 x 1.25 Blk, 1/2-13 x 1-1/2 stmHydraulic Complete Manual Unit - 12" (posts,pump & handle)PANDUIT WIRE MGMT 72.0 ASSYMonitor Mounts Static Monitor MountsPOWER STRIP 8-PLG HBL 2.31 x 3.0 x 24.06' cord lengthTOP PNL 1.00 x 84.0 x 30.0 CRS BLK SEMIGLS SMUNISTRUT BAR 12GA x 1.63 x 60.0 BLK SEMIGLSSMPOWER STRIP ASSY 1.5 x 76 BLK SEM SMTMONITOR RAIL 11GA x 76 x 1.62 x 1.62 BLK SEMSMTHDWE UNI ASSY KIT .375 DIA x 2.75STD SHELF 1.00 x 83.75 x 12.0 CRS BLK SEMIGLSSMGrater cup 2" sq with 4 clips, 1/2-13Worksurface grommet, right locationBOLT SH SPDR x 16GA x 2.0SQ x 78.875 BLK SEMSMTNOTE: Mount hydraulics control to right location.NOTE: Mount lower spreader at rear location.Hardware Black grommet covers 2-3/4"WELD SPDR 16GA x 2.0 SQ x 79.0L CLIPS 1-1/8X1-1/4X1-1/4, 13
WKS 5 | LAN UNITWORKSTATIONS
STANTEC ARCHITECTURE | 2338 COOLIDGE HIGHWAY, BERKLEY MI. 48072