Integrated Tote MixerSOLUTIONS FOR MIXING IN PLASTIC TOTES
W W W. D Y N A M I X I N C . C O [email protected] 604 244 3771
EMAIL MAIN
01. Features + Benefits
02. Technical Specifications
03. Quality Control + Portability
04. Solution Assurance
05. Product + Ordering Information
MIXING EXPERIENCE WITH SOLUTIONSMIXING EXPERIENCE WITH SOLUTIONS
ITM Technical Specs
ITM for Plastic Totes ITM for Stainless Steel Totes
D
L
A
d
D
L
A
d
THREADED MOUNT
COLLAPSIBLE IMPELLER
LID MOUNT
FIXED IMPELLER
Dynamix has a unique focus on Tote mixing. For this we offer our ITM line for Plastic Totes as well as Stainless Steel Totes.
Typical Configurations
If there is a mixer configuration you would prefer and do not see, please contact Dynamix.
* Also available with Electric Motors
SPEC
IFIC
ATIO
NS Motor Type Electric Air
Model ITM-7305G ITM-7305J ITM-7305K ITM-7230G ITM-7605J ITM-7605K ITM-7610K
Horsepower 0.50 0.50 1 0.5 0.5 0.5 1
Speed (rpm) 350 175 88 350 175 88 88
DIM
ENSI
ON
S Drive Unit Length A 17.5” 17.5” 17.5” 17.5” 17.5” 17.5” 17.5”
Shaft Diameter d 3/4” 3/4” 1” 3/4” 3/4” 1” 1”
Shaft Length** L 34” 34” 34” 34” 34” 34” 34”
Impeller Diameter* Single 10” 13” 13” 15” - 17” 17” - 21”
Dual 17” - 19” 17”-21”
*Shaft Length will be dependent on tank geometry*Impleller Diameter should be selected to suite the drive and application
*Dual Impeller configurations also available*Impeller types are selected according to application
ITM Series
Get a Quote Now!
Quality Mixing
Problem
The typical mixer sold for totes is just a standard mixer adapted to the tote via a bridge, clamp or hoist. These adaptations result in contamination via exposure and cross contamination;
1 EXPOSURE CONTAMINATION Common mixing apparatus adapts the mixer to the tote via an additional apparatus: Lift, Bridge, Hoist, etc. All of these methods leave the tote mouth explosed to the environment.
2 CROSS CONTAMINATION Traditional mixers are a single unit and cannot be separated in the same manner as an ITM. Therefore, they are transferred from one tank/application to the next. This method results in cross contamination. In most cases labor intensive cleaning is employed, but this still does not assure the cleanliness of the mixer shaft.
Solution
The Integrated Tote Mixer “ITM” is unique because it is designed to become part of the tote tank.
1 The ITM Mount allows the Agitator Segment to be committed to and seal your tote. This mounting eliminates any exposure to the environment during mixing, storage and application. Once an ITM encloses your product and tote it does not have to be exposed to the environment until dispensed.
The ITM Solution
Portability
Assembly and Installation
One of the most valuable benefits of the ITM is its portability. Because the ITM is highly portable you can now apply your new quality control tool (The ITM) wherever you need.
1 The mixer consists of 2 detachable segments ( A. Drive Segment B. Agitator Segment) which can be installed and removed by one person.
2 The Agitator Segment can be inserted through the 6 inch*opening and mounted fully sealing the tote.
3 The drive segment dynamically couples to the agitator segment with a twist and lock.
4 Once mounted and in operation, the impellers expand into its full diameter (up to 21”).
5 Your product can now be brought back into specification without the concern of contamination.
* Available for openings of various diameters
2 The unique ITM Dynamic Coupling allows a common Drive Segment to be applied to several products/totes (red, green, blue) without removing cleaning and inserting an agitator each time. There is no need to clean the mixer in between applications. As per above this ensures the product is not exposed to the environment, but more importantly it is not the source of cross contamination by the agitator. This can translate into cost savings in the overall mixer investment, as well as your cost of cleaning.
By assuring your mixing quality through our Solution Assurance, then enclosing this technology from the above contamination you will pay for your ITM Mixers and reduce quality issues such as returned product, dump back and improve customer relationships.
2 31 544
Solution Assurance
Your Solution Assurance
While some other mixer companies try to provide mixers
on a “one size fits all” approach, we believe it is our
responsibility to optimize your mixer according to your
process needs.
Although we stock several key mixer lines we are not an
“off the shelf” mixer company, we are a Solutions oriented
Company.
Our exacting clients credit us with aiding ancillary issues
such as energy, contamination, process cost and much
more. Our engineering staff is prepared to work with you.
We have Chemical and Mechanical Engineering experience
which will understand your product requirements in order
to properly configure a mixer for you. These solutions
will consider the chemical properties of your application
(Viscosity, Specific Gravity, etc.), Tank (Type and
Dimensions), Process (Cost and Time) and Environment in
order to provide a solution for you.
The outcome is our Solution Assurance. Based on your
description of your needs, this Assurance will indicate the
time required to bring your product back to uniformity.
Understanding Customer’s Application & Process Needs
Dynamix Engineering & Design Process
Dynamix Solution Assurance
GUARANTEED RESULTS Our unique Solution Assurance program is our commitment to offering you more than just a mixer. These are not just words at Dynamix. We back this approach up with our Solution Assurance Guarantee.
1
2
3
11
22
33
Product LineIf you don’t see exactly what you need We most likely have itIf you are concerned about performance We can configure and guarantee it Ask
Drums & Drum Mixers - MMX Series
Medium Tanks - GMX Series(5000 - 30,000 Gal.)
Totes & Tote Mixers - ITM Series Portable Mixers - DMX Series
Industrial Tanks - Nautilus Series (30,000 - 300,000 Gal.)
(250 - 550 Gal.) (400-5000 Gal.)
(50 Gal.)
(5000 - 30,000 Gal.)
Bung Mount Universal Drum Mount Drum Lid Mount
Top Related