HELLO, MY NAME IS…
• Neo Endian, call me Neo
• My assistant is SK.
•These slides can be downloaded at bit.ly/DIY3Dvideo
SOFTWARE USED
• MediaInfo (freeware, video and audio info)
• Lightworks (Lite edition, Video editing software)
• KMPlayer (freeware, Video player)
• 3D Combine (Trial edition, Video compositor)
LESSON FOR TODAY
• Intro to 3D video
• Team formation
• How to Film Footage
• Lightworks Tutorial
• Break/Brainstorm
• Filming
• Advanced Tutorial
• Edit and submission
FILMING 3D
• 2 Identical Cameras
• About 3-4cm apart
“1-in-30” Rule
• Stereo base lens separation should be 1/30th distance from nearestobject in scene.
HOW TO FILM 3D
1. Turn on both cameras (set to film)
2. Press both record buttons at same time
3. Clap in front of the camera (synch cue)
4. Film footage
5. Stop both record buttons at same time
6. Turn off cameras (save battery!)
LIGHTWORKS TUTORIAL
How to make a basic stereoscopic video
1. Import Videos
2. Splitscreen VFX
3. Syncing both feeds (Mark, Park and Trim)
4. Export
5. Playback with KMPlayer (Anaglyph)
• There is another way to create 3D videos (covered in Advanced tutorial)
FILM SCHEDULE
Team 1 Team 2 Team 3 Team 4
30 min Filming Adv tut Rehearsal Adv tut
30 min Adv tut Filming Adv tut Rehearsal
30 min Editing Editing Filming Buffer
30 min Buffer Buffer Editing Filming
30 min Buffer Buffer Buffer Editing
ADVANCED TUTORIAL
Creating Anaglyph Videos
1. Remove Splitscreen VFX
2. Create subclips and exportI. Mark and park each grouped video/audio streamII. Make Copy of streamIII. Export the subclipIV. Repeat for other stream
3. Import into 3D CombineI. Import both streamsII. Select 3D methodIII. Preview and Export
Top Related