Radius DividerManual
Index
p3-4
p5
p6-7
Product description
Recycling
Assembly instructions|Radius Divider
Radius Divider Green Furniture Concept3
Metal sheet
Plastic glide
Metal clip
Product descriptionParts
Radius Divider Green Furniture Concept4
Radius Divider can be made to any curvature between 0-45 degrees, both concave and convex. Standardmodules are straight and convex /concave 45 degrees.
Product descriptionApperance
Color & pattern
Standard or custom colors can be chosen as well as color mixes. The Radius Divider comes with cut out holes for a see-through effect (custom patterns possible) or plain which gives a surface where a message or imagecan be applied.
Curvature
Radius Divider Green Furniture Concept5
Glides are made of PE and are sorted as plastic.
Recycling
Sheets, clips and small parts are made of steel and are sorted as metal.
Radius Divider Green Furniture Concept6
Divider metal sheet x1 Divider glides x2 Divider clip x1
Screw A x6
Assembly instructionsIOU Back
Bolt A x1
Radius Divider Green Furniture Concept7
Insert the metal sheet into the plastic glides.
Slide the clip between the metal sheets to makethe Dividers stable. The clip should be placed200 milimeters from the top.
Use screw A to attach the metal sheet to theplastic glides.
Assembly instructionsIOU Back
3 4
1 2
Use two screw A to the outermost rib on eachside to attach the metal sheet to Nova C back.The ideal distance between the metal sheetand Nova C back is 30 milimeters.
Use bolt A to tighten the clip to the metal sheets.
5
greenfc.com
Top Related