DIVBREAK - breaks polyline to given segments (C) 2004, Xanadu s.r.o. http://www.xanadu.cz ------------------------------------------------DIVBREAK is a LISP utility for AutoCAD 2000, 2000i, 2002, 2004, 2005 which can break open polylines (LWPOLYLINE, SPLINE) into segments of a given length or to a given number of segments. DIVBREAK combines the BREAK and MEASURE/DIVIDE commands. DIVBREAK uses the BREAK command so new entities will be created in place of the original curve. Temporary arrow marks are drawn in break points. Use redraw or [F7][F7] to get rif of them. Tip: set _DIVBREAKMARKS to T (true) to disable the marks (arrows in break points) License: DIVBREAK is a free utility by Xanadu, do not publish it online on other than Xanadu web servers. -------------------------------------------------Contact: Xanadu s.r.o. Tylova 17, 370 01 Ceske Budejovice, Czech Republic info@xanadu.cz www.xanadu.cz www.cadforum.cz