Description & Drawings for Kitchen Equipments
Name of Work : Construction, Supplying, fixing and commissioning of Kitchen
Equipments(including Civil & Electrical works) at Scholars Hostel, NIIST, Trivandrum
Sl.
No.
Item Specification Quantity
1 Stainless steel-Steam Generator with one idly
steamer plus 3 vessels
Steam generator-30Kg
capacity, 30” to 32” outer
dia, Stainless steel material
with outer jacket of 6mm and
inner vessel 2mm with all
accessories like pressure
gauge, Float Valve, water
level indicator, safety valve,
drain valve, MS 25mm
square rod stand with
chimney-LPG operated in not
less than 42Kgs/min.
including SS stand
1 Each
SS Vessels50 Ltrs. Capacity,
double jacket vessels, 1.6mm
thick side wall and 2.0mm
thick bottom SS plate with lid
and tilting arrangements with
all accessories, SS Stand
3 Each
Idly/Iddiappam unit120 per
cycle, Heat resistance door
with accessories
1 Each
2 Cooking gas system Capacity of 10
cylinders(3+3) manifold
system with DBC click on
adapter, HP regulator
connector shut off valves,
unit valves with frame
connector and the ½” dia MS
pipe(16G) line, cost including
specials, welding, painting
pressure testing etc.
1 Each
3 Bulk cooking range600x600x600mm(Single
burner with cross supports)
As per drawing 2 Each
4 Bulk cooking
range1650x600x(850+150)mm(Three burner
with cross supports)
As per drawing 1 Each
5 5 container Bainmarie counter with one U/S
& 3 side covering tray
slider1800x(625+300)x850mm
As per drawing 1 Each
6 SS 3 tier trolly-950x600x 900mm As per drawing 2 Each
7 Plain pickup table with 2 under shelves, 2
OHS & 3 side
covering1200x(625+300)x(850+450+300)mm
As per drawing 1 Each
8 SS Work table with one under shelf & splash
– 1500x600x(850+150)mm
As per drawing 2 Each
9 SS Work table with sink, one U/S &
splash-1650x600x(850+150)mm
As per drawing 1 Each
10 Three sink washing unit with rear splash
& cross supports –
1650x600x(850+150)mm
As per drawing 1 Each
11 Drain table with cross supports &
Splash-1100x600x(850+150)mm
As per drawing 1 Each
12 Dosa/Chappathi plate with cross
supports-1500 x750x(850+150)mm
As per drawing 1 Each
13 Solid dish landing table with cross
supports &
splash1500x600x(850+150)mm
As per drawing 1 Each
14 Storage rack 5 tier-1800 x500x 1800mm As per drawing 1 Each
15 Granite table top with one under
shelf1500x750x(850+150)mm
As per drawing 1 Each
16 Dough Kneeder with SS boel-25Kg
capacity
As per drawing 1 Each
17 Water cooler-35 Ltrs. 1 Each
18 Wet Grinder-7 Ltr. Capacity 2 Each
19 Pot rack three tier-1200x600x 1500mm 1 Each
20 For door vertical freezer As per drawing 1 Each
21 Exhaust system(as per the instruction of
engineer in charge)
Supply exhaust blower 5HP 500
CFM static pressure 70mm water
column. Direct drive, 415 V rpm
with Dol starter and Exhaust
hood made out of 20swg sheet
with filter of SS hood size varies
3000-16500 x850 x500mm and
GI ducting(120gsm galvanized
sheet) with supports etc Cost
including Fan, accessories,
erection charges if any etc
1 Unit
22 Civil & Electrical related works for
providing and commissioning of the all
above equipments
As per the direction of Engineer
in-charge.(water & electrical lines
up to the existing sources)
LS (one
job)
Note 1 The quotation should include layout plan showing clearly the mentioned items
2 The offer shall include all related civil, electrical and plumbing works etc
3 Site will be handed over in as where as condition
4 Before doing the work, each things are approved by the engineer in-charge
Top Related