_________________________________________________________________________________________Decoder Verification Test Report - High Level
Manufacturer
Model Number
Demodulator
Market
Operator
Date Tested
Build Date
Software Version
Driver Version
Hardware Version
Softcell Version
Loader Version
Flash Size x Ram Size
Middleware Software
DVB-S2
N8760B
Decoder Verification Test Report
For High level Code
Reference Number
COSHIP
16 x 256
Not Applicable
Multiview
SMD
DVT Type
CSHSKLH58101203
Czech
Skylink
3-Dec-10
27-Nov-10
110
Not Stated
58
3.9.16
3.3
Standard security
DVB over IP
Advanced security
CI CAM
CI plus
CSHSKLH58101203.xlsx 1
_________________________________________________________________________________________Decoder Verification Test Report - High Level
High level DVT consists of two parts, those are, Integrated Loader
Tests and CA Tests. EPG functionality test isn't included in high
level DVT.
In the absence of an operator URS (User Requirement
Specification), the Softcell Integration Guide (#700295 or # 711886)
will be used as reference.
It is strongly advised that the Operator does extensive field trial
tests, specifically to assess the IRD performance, look and feel,
video and audio quality and general behaviour of the IRD.
Most of test cases are carried out based on bit streams. Advanced
test is based on Pisys.
Scope of Testing
CSHSKLH58101203.xlsx 2
_________________________________________________________________________________________Decoder Verification Test Report - High Level
Brand: Version:
Brand: Model No:
Brand: Model No:
1)
2)
3)
RSA
Secure
Boot
Enable
JTAG
Locking
Enable
CW
Protected
IRD 1 Not Applicable Disabled Disabled Disabled
IRD 2 Not Applicable Disabled Disabled Disabled
IRD 3 Not Applicable Disabled Disabled Disabled
IRD 4 Not Applicable Disabled Disabled Disabled
IRD 5 Not Applicable Disabled Disabled Disabled
3. Start of Testing 29-Nov-10
1. Sign Off
1. Number of IRDs used during Test 5
2. Original Schedule Date 29-Nov-10
4. Hours used for Testing 40
5. Manufacturer binary code N8760B_DVT_1127.bin
6. Flash Configuration file CSHX_X3A_16M.cfg
7. Software Received 29-Nov-10
2. DVT performed on the following equipments
Bitstream Player:
Bluetop V7.4
Modulator:
Tandberg SM6625
Up-Converter:
Not Applicable Not Applicable
3. Notes:
This IRD do not have the secure Irdeto Loader. Manufacturer has supplemented their own
loader and as such, is responsible for any possible downloads to these IRDs
This IRD has Loader approval. Refer to Loader DVT report number:
CSHXL58100611
The current field software is:
1091
Software under test:
110
Softcell used:
Softcell 3 DVB Client (single decode) version 3.9.16 [coship, HW 58 Built 2010-09-01 15:03, release
Build].Built Sep 1 2010 at 15:04:59.
Details of IRDs used for this DVT:
CSSN (for
advanced security
device, HEX)
Secure related switches
(for advanced security device)
IRD Serial Number Flash Configuration
84000019390007 16 x 256
84000019390010 16 x 256
84000019390002 16 x 256
84000019390006 16 x 256
84000019390008 16 x 256
CSHSKLH58101203.xlsx 3
_________________________________________________________________________________________Decoder Verification Test Report - High Level
4)
Version Type Patch Level Protocol Vendor ID IRD
2.2 Normal NA T=0 624 #1
6.0 Normal NA T=0 624 #1
4.1 Normal NA T=0 624 #2
5.4 Normal 9 T=0 624 #2
5.4 Normal 12 T=0 624 #2
5.0 Normal 3 T=0 624 #3
5.4 Normal 12 T=0 624 #3
5.3 Normal 8 T=0 604 #4
5.7 Normal NA T=0 624 #4
6.0 Normal NA T=0 624 #4
5.7 Normal 12 T=0 624 #5
Not Used Not Applicable -
Not Applicable Not Applicable -
Not Applicable Not Applicable -
Not Applicable Not Applicable -
Not Applicable Not Applicable -
Not Applicable Not Applicable -
5)
Bit Stream Version Version
OTA_Download V2.5 V2.5
SmartcardInit V2.5 V2.5
SmartcardTest V2.5 V2.5
SmartcardReset V2.5 V2.5
911mode V2.5 V2.5
DecoderTest V2.5 V2.5
StatusDisplay V3.3 V2.5
DriverTest V2.5 V2.5
CompLevelScramble V2.5 V2.5
FingerPrinting V2.5 NA
IRDMessage_00 V2.5 NA
IRDMessage_04 V2.5 V2.5
IRDMessage_01_MsgType05_Recovery00 NA MRBasicTest V2.5
IRDMessage_01_MsgType05_Recovery02 NA MRIppvTest NA
IRDMessage_01_MsgType05_Recovery05 NA SecureChipPair NA
TMSTest_network V2.5 SecureChipUnpair NA
TMSTest_transport V2.5 SOLTest NA
TMSTest_service V2.5 EMMStressSoakTest V3.5
Macrovison NA NA
IPPVTest NA
6) Details of Test Procedure used:
Doc No. Version
737549 DVT Automation Phase 3 6
730616
711417
730871 1.01.02
730652
734372
Smart Card 2 42000007221
Details of Smart Cards used:
Serial Number
Smart Card 1 40015493667
Smart Card 3 40064809524
Smart Card 4 40230957447
Smart Card 5 40277016156(Var 2_MR)
Smart Card 6 40088904293
Smart Card 7 40277016164(Var 2_MR)
Smart Card 8 40203249996
Smart Card 15 Not Applicable
Smart Card 16
Smart Card 9 41170170116(ICE_MR)
Smart Card 10 42000005381(T0CW)
Smart Card 11 41167050610
Smart Card 12 Not Applicable
Smart Card 13 Not Applicable
Smart Card 14 Not Applicable
Not Applicable
Smart Card 17 Not Applicable
SCMarriageNMarry
SCMarriageFMarry
Details of Bit Streams used:
Bit Stream
Rules for smart cards selecting:
a, For each version (2.2, 4.1, 5.0, 5.3, 5.7, 6.0), at least one card should be used in each test case.
b, V5.4 card should be used in 'smart card driver' and 'EMM soak test'.
c, At least one card with vendor ID = 604 should be used for all simulcrypted test bitstreams.
d, If both T=0 and T=14 are supported, each protocol should be covered. But it not necessary to have both
protocol for each version smart card (except for 'smart card driver' test).
SCMarriageUnmarry
SCMarriageVerify
SurfLocking
CustomCA
RSAChallenge
FlexiFlash
RunningStatus
HomingChannel
DVT Procedure for SoftCell 3 DVB Client
DVT PROCEDURE FOR SOFTCELL 3 DVB PVR
Homing_Channel_DVBS2
EnableMRConf
IPPV Test Procedure using PiSys
GenericMultipleSmartcard
Doc Name
High Level DVT Procedure for La7 IRDs
High Level DVT Procedure For IRD Software
CSHSKLH58101203.xlsx 4
_________________________________________________________________________________________Decoder Verification Test Report - High Level
6)
Please note here if any operator requirement or specific pre-condition for the tests:
I - This model was originally registered as advanced security STB. However, Secure CW mode
was not enabled for this high-level DVT, which is known and accepted by Operator. Secure boot
and JTAG Port were enabled, which is the same as former loader DVT.
II - OTA download was performed with download service 02. When using download service 01,
following issues were observed:
- Valid EMM download was initiated successfully but the downloading was failed with the error
banner '80030038 - A timeout occurred whilst attempting to acquire a download section'
displayed on front panel during downloading progress.
- Valid menu driven OTA download was initiated successfully but the downloading was randomly
failed at the first time with the error banner '80030038 - A timeout occurred whilst attempting to
acquire a download section' displayed on front panel during downloading progress. Then menu
driven OTA download was successful by reinitiating. This was occurred 50%.
Notes for all test cases:
CSHSKLH58101203.xlsx 4
Decoder Verification Test Report - High Level
TestCase Result Remark
Step01 Pass
Step02 Pass
Pass
Step03 Untested
Step04 Pass
Step05/06/07 Pass
Pass
Step08/09
case001 Pass
case002 Pass
case003 Pass
case004 Pass
case005 Pass
case006 Pass
case007 Pass
case008 Pass
case009 Pass
case010 Pass
case011 Pass
case012 Pass
case013 Pass
case 014 Pass
Pass
case015 Pass
Pass
case016 Pass
Pass
case 017 Pass
Pass
case018 Pass
Pass
case019 Pass
Pass
Step10 Pass
Fail
The build date of software was not consistent with manufacture's input document.
The build date was 'Nov 25 2010' on loader status menu but in manufacture's input
document it was '2010-11-27'.
Step11 Untested
The OTA Download was not implemented when the STB was in standby mode.
This was stated in the manufacturer's input.
Quote:
When the STB is in standby mode, we cannot implement the OTA and receive the
messages, as we should reduce the power dissipation according the provision of
European Union. So we turn off most of the hardware component in the standby
mode. The statement from SkyLink is attached with the firmware.
EMM/CtrlByte=02 - enhanced linkage descriptor
same load ver. - standard&enhanced linkage descriptor
load ver. + 1 - standard&enhanced linkage descriptor
wrong MFC ID - standard linkage descriptor
menu/CtrlByte=02 - standard linkage descriptor
EMM/CtrlByte=02 - standard linkage descriptor
load ver. + 99 - enhanced linkage descriptor
menu/CtrlByte=00 - standard linkage descriptor
correct MFC ID - standard linkage descriptor
wrong MFC ID - enhanced linkage descriptor
wrong HW Ver. - enhanced linkage descriptor
wrong variant - enhanced linkage descriptor
menu/CtrlByte=01 - standard linkage descriptor
Customer settings
Upgrade to DVT S/W directly (if step01 & step02 are untested)
Reject current version S/W
Reject a menu upgrade - CRC error
Reject EMM upgrade - CRC error
OTA DOWNLOAD
Description
Upgrade to infield S/W
Upgrade from infield S/W to DVT S/W
Download in standby mode
Items on Loader Status Menu
OTA_Download.mpg
menu/CtrlByte=00 - enhanced linkage descriptor
EMM/CtrlByte=00 - enhanced linkage descriptor
menu/CtrlByte=01 - enhanced linkage descriptor
EMM/CtrlByte=01 - enhanced linkage descriptor
menu/CtrlByte=02 - enhanced linkage descriptor
EMM/CtrlByte=00 - standard linkage descriptor
Cross transponders download
load ver. + 100 - enhanced linkage descriptor
load ver. + 1 - enhanced linkage descriptor
load ver. - enhanced linkage descriptor
wrong HW ver. - standard&enhanced linkage descriptor
wrong variant - standard&enhanced linkage descriptor
EMM/CtrlByte=01 - standard linkage descriptor
CSHSKLH58101203.xlsx
Decoder Verification Test Report - High Level
TestCase Description
SMARTCARD TEST
Service 101:
Time
(m:ss) SoftCell 2 SoftCell 3
0:00 ~ 0:10 E16 E16-4 Pass
0:10 ~ 0:50 E29 D29-4 Pass
Service 101:
Time
(m:ss) SoftCell 2 SoftCell 3
0:00 ~ 1:40 E29 D29-4 Pass
Pass
Pass
Pass
Pass
Service 101:
Time
(m:ss) SoftCell 2 SoftCell 3
0:00 ~ 0:40 E29 D29-4 Pass
0:40 ~ 0:50 E16 E16-4 Pass
DECODER TEST
Service 101 / 102:
Step01 Time
Step02 (m:ss) SCell 2 Scell 3
0:00 ~ 0:10 E00 D100-8 Pass
0:10 ~ 1:50 E29 D29-4 Pass
Pass
1:50 ~ 2:00 E00 D100-8 Pass
Service 101 / 102:
Time
Step01 Switch to service 101 (HD). (m:ss) SCell 2 Scell 3
Video running smoothly all over. 0:00 ~ 0:20 E00 D100-8 Pass
Get different audio tracks (if supports). 0:20 ~ 2:10 E29 D29-4 Pass
Step02 Switch to service 102 (SD). 2:10 ~ 2:30 E00 D100-8 Pass
Video running smoothly all over. Untested
Get different audio tracks (if supports). Untested
CA FEATURES TEST
Initialize all the smartcards.
Different audio tracks on svc 102
SmartcardReset.mpg
Remove smartcard and re-inserted after 10s
Video returns after smart cards reinserted.Result
DecoderTest.mpg
Result
SmartcardInit.mpg
Video running smoothly all over.
911Mode.mpg
SmartcardTest.mpg
Remark
Remark
ErrorCodes
ErrorCodes
Different audio tracks on svc 101
RemarkErrorCodes
Result RemarkErrorCodes
Power cycle without smartcard inserted
Power cycle with smartcard inserted
Switching service
Smartcard inserted incorrectly
Result
Result
ErrorCodes
Restore all the smartcards.Remark
CSHSKLH58101203.xlsx
Decoder Verification Test Report - High Level
CONT.-0
StatusDisp
lay.mpg Service 101:
V2/V4 V5.0 V5.3/5.4/5.7 V6 V2/V4 V5.0V5.3/5.4
/5.7V6
V5.7 and
/or lower V6
0:00~0:20 E17 E00/E--[[4]] E00/E-- E17>E30[[5]] E101-4 E16-4 E109-4 E101-4 E16-4 E101-4
0x--/0x-- 0x6A/0x6A >E16[[6]] >E30-4[7]>E30-4>E16-
4[[8]]
0:20~0:40 E29 E29 E29 E29 D29-4 D29-4 D29-4 D29-4 D29-4 D29-4 Pass
0:40~1:00 E17 E29 E29 E16[9] E101-4 E16-4 E109-4 E30-4 E16-4D29-4 with
black screen
0x--/0x-- 0x6A/0x6A /E30 /E16-4[10]
1:00~1:20 E29 E29 E29 E29 D29-4 D29-4 D29-4 D29-4 D29-4 D29-4 Pass
1:20~1:40 E17 E29 E29 E16>E30 E101-4 E16-4 E109-4 E30-4> E16-4
D29-4 with
black screen
/E16-4[13]
0x--/0x-- 0x6A/0x6A >E17[[11]] E101-4[12] >E101-4
Pass
Pass
Pass
Service 102:
V2/V4 V5.0 V5.3/5.4/5.7 V6 V2/V4 V5.0V5.3/5.4
/5.7V6
V5.7 and
/or lower V6
0:00~0:20 E00 E00 E00 E00 D100-8 D100-8 D100-8 D100-8 D100-8 D100-8 Pass
0:20~0:40 E17 E00/E-- E00 E16[14] E101-4 E16-4 E109-4 E30-4 E16-4
I34-9 with
black screen
/E16-4 [15]
0x--/0x-- 0x6D /0x6D /E30
0:40~1:00 E29 E29 E29 E29 D29-4 D29-4 D29-4 D29-4 D29-4 D29-4 Pass
1:00~1:20 E00 E00 E00 E00 D100-8 D100-8 D100-8 D100-8 D100-8 D100-8 Pass
1:20~1:40 E17
E29/E00 E00 E16/E30
E101-4 E16-4 E109-4
E30>
E16-4
I34-9 with
black screen
/E16-4 [18]
0x--/0x-- 0x6D /0x6D >E17[[16]] E101-4[17] > E101-4Pass
Pass
Pass
Pass
SoftCell 3.6.25 ~ 3.6.28
SoftCell 3.8 and/or higherRemark
SoftCell 3.7
Pass
STATUS DISPLAY TEST
ECM PID & monitoring sections update
EMM monitor data update dynamically
Mandatory Items are included on status screen
Nationality update
SoftCell2.xSoftCell 3.6.24 and/or lower
SoftCell 3.7
Expected ErrorCodes
ECM PID & monitoring sections update
EMM monitor data update dynamically
Mandatory Items are included on status screen
Time
(m:ss)
Time
(m:ss)
Expected ErrorCodes
SoftCell 3.6.24 and/or lower
Pass
Result
Result Remark
SoftCell 3.6.25 ~ 3.6.28
SoftCell 3.8 and/or higher
Pass
Pass
Pass
SoftCell2.x
CSHSKLH58101203.xlsx
Decoder Verification Test Report - High Level
CONT.-1
DRIVER TEST
Service 101:
Step01 Time
(m:ss) SCell 2 SCell 3
Scrambled with product_0 and block_0~block_7 on sector_0
0:00 ~ 0:20 E16 E16-4 Pass
0:20 ~ 0:40 E29 D29-4 Pass
0:40 ~ 1:00 E18 E18-4 Pass
1:00 ~ 1:20 E16 E16-4 Pass
1:20 ~ 1:40 E18 E18-4 Pass
Scrambled with multi-products on different sectors
1:40 ~ 2:00 E00 D100-8 Pass
2:00 ~ 3:20 E29 D29-4 Pass
Scrambled with product_0~product_9 on sector_0
3:20 ~ 3:30 E00 D100-8 Pass
3:30 ~ 5:00 E29 D29-4 Pass
5:00 ~ 5:20 E00 D100-8 Pass
Pass
RemarkVideo & Error banners
DriverTest.mpg
Products on the smartcardsErrorCodes
Result
Products on the smart cards
CSHSKLH58101203.xlsx
Decoder Verification Test Report - High Level
CONT.-2
COMPONENT LEVEL SCRAMBLE TEST
Service 101:
Step01 Time
(m:ss) SoftCell 2 SoftCell 30:00 ~ 0:20 E00 D100-8 Untested
0:20 ~ 0:40 E16 E16-4 Untested
0x50/0x1d E16-4/D29-4 Untested
E29 D29-4 Untested
0x1d/0x1d D29-4/D29-4 Untested
E16 E16-4 Untested
0x50/0x1d E16-4/D29-4 Untested
E29 D29-4 Untested
0x1d/0x1d D29-4/D29-4 Untested
E16 E16-4 Untested
0x1d/0x50 D29-4/E16-4 Untested
2:00 ~ 2:20 E00 D100-8 Untested
Untested
Step02 Service 102:
Time
(m:ss) SoftCell 2 SoftCell 30:00 ~ 0:20 E00 D100-8 Pass
E16 E16-4 Pass
0x50/0x1d E16-4/D29-4 Pass
E29 D29-4 Pass
0x1d/0x1d D29-4/D29-4 Pass
E16 E16-4 Pass
0x50/0x1d E16-4/D29-4 Pass
E29 D29-4 Pass
0x1d/0x1d D29-4/D29-4 Pass
E16 E16-4 Pass
0x1d or
0x50/0x50
E16-4/E16-4
Pass
2:00 ~ 2:20 E00 D100-8 Pass
Pass
1:00 ~ 1:20
1:20 ~ 1:40
1:40 ~ 2:00
2 x ECM PID & monitoring sections update
Audio and Video & Error Banners
2 x ECM PID & monitoring sections update
Global service status on Descramble Service Status Menu
Video & Error BannersResult
ErrorCodes
0:20 ~ 0:40
Same as above.
0:40 ~ 1:00
Global service status on Descramble Service Status Menu
CompLevelScramble.mpg
0:40 ~ 1:00
1:00 ~ 1:20
ErrorCodes
1:20 ~ 1:40
Remark
Remark
This test case is only available for cable IRDs in China market.
Same as above.
2 x ECM PID & monitoring sections update
2 x ECM PID & monitoring sections update
Result
1:40 ~ 2:00
Same as above.
Same as above.
Same as above.
Same as above.
Same as above.
Same as above.
Same as above.
Same as above.
Same as above.
Same as above.
CSHSKLH58101203.xlsx
Decoder Verification Test Report - High Level
CONT.-3
FINGER PRINTING TEST
Service 101:
Step01
Pass
Cover FingerPrinting attributes Pass
Pass
Attributes of ADM Pass
Pass
Display_method Pass
Pass
Highest priority of finger printing Fail
Fail
Service 102:
Step02
Cover FingerPrinting attributes
Pass
Pass
Pass
Fingerprinting was not observed when 'Installation' menu was entered.
I - The title was observed for all overt fingerprinting at 11s, 120s, 160s and 186s.
The overt fingerprinting was expected to be displayed without title.
II - The text size of overt fingerprinting was not match with the size of
background.
III - Fingerprinting/ADM at 0:11 was not displayed as expected:
i - The font color was black and the background color was green. The font color
was expected to be green and the background color was purple.
ii - The font and background were not transparent. The expected was
semitransparent.
iii - The fingerprinting was displayed on whole screen. Expected was that they
were displayed 100% of banner width versus screen width due to 'coverage=63'.
IV - The attribute of fingerprinting at 0:40 was not displayed as expected:
i - The fingerprinting type was covert. It was expected to be overt.
ii - The duration was 30s but the expected was 10s.
iii - The fingerprinting was flashed, however it was expected to be not flashed.
V- The fingerprinting at 1:20 and 3:06 were not displayed as expected:
i - The font color was black. The expected was orange.
ii - The font and background were not transparent. The expected was
semitransparent.
iii - The fingerprinting at 3:06 was displayed on whole screen. Expected was that
they were displayed 100% of banner width versus screen width due to
'coverage=63'.
Attributes (duration; Flashing;)
FingerPrinting.mpg
Verify the highest priority of finger printing via ECM
Over FingerPrinting attributes
Over FingerPrinting attributes
FingerPrinting via ECM at 40s,80s,120s and 160s
FingerPrinting via EMM at 11s,186s and 200s
FingerPrinting via EMM at 11s,186s and 200s
Duration
Attributes of ADM
Duration
FingerPrinting via EMM at 186s
FingerPrinting via EMM at 186s
Item
FingerPrinting via ECM at 120s
FingerPrinting via ECM at 160s
FingerPrinting via ECM at 40s
FingerPrinting via ECM at 80s
Remark
RemarkResult
Result
FingerPrinting via EMM at 11s
Item
FingerPrinting via EMM at 11s
FingerPrinting via EMM at 200s
FingerPrinting via EMM at 200s
CSHSKLH58101203.xlsx
Decoder Verification Test Report - High Level
MAIL / ANNOUNCEMENT MESSAGE TEST
Service 101 / 102:
Step01 Forced announcement on clear service 101/102
Normal announcement on clear service101/ 102
Forced mail on clear service 101/102 Pass
maximum size announcement(255 bytes) on clear service Pass
101/102 Pass
Normal mail on clear service 101/102 Pass
maximum size mail (255 bytes)on clear service 101/102 Pass
Pass
Pass
Loader info consistency Pass
step02 Untested
Untested
The OTA Download was not implemented when the STB was in standby mode.
This was stated in the manufacturer's input.
Quote:
When the STB is in standby mode, we cannot implement the OTA and receive
the messages, as we should reduce the power dissipation according the
provision of European Union. So we turn off most of the hardware component in
the standby mode. The statement from SkyLink is attached with the firmware.
Same as above.Standby-mode on service 102
Attributes (forced and normal)
Forced announcement
IRDMessage_00.mpg
Forced mail
Normal mail
Result
Maximum size announcement
Remark
Standby-mode on service 101
Attributes(Forced and Normal)
Text message receiving in standby
Item
Maximum size mail
Normal announcement
CSHSKLH58101203.xlsx
Decoder Verification Test Report - High Level
CONT.-4
ATTRIBUTED DISPLAY MESSAGE TEST
Service 101:
Step01
Pass
Pass
Pass
Pass
Pass
Pass
Step02 Service 102:
Pass
Pass
Pass
Pass
Pass
Pass
DECODER CONTROL MESSAGE TEST
Service 101:
Untested
Service 101:
Untested
Service 101:
Untested
This was stated in the manufacturer's input:
Quote:
10. DECODER CONTROL MESSAGE TEST
III. IRDMessage_01_MsgType05_Recovery05.mpg: Untested
Remark
Remark
Remark
This was stated in the manufacturer's input:
Quote:
10. DECODER CONTROL MESSAGE TEST
I. IRDMessage_01_MsgType05_Recovery00.mpg: Untested
This was stated in the manufacturer's input:
Quote:
10. DECODER CONTROL MESSAGE TEST
II. IRDMessage_01_MsgType05_Recovery02.mpg: Untested
Remark
Remark
Attributes of ADM
Duration
Normal ADM on scrambled service 101
Duration
Display method
IRDMessage_01_MsgType05_Recovery02.mpg
Re-scan & reset channel order
Forced maximum size ADM
Normal ADM
Normal maximum size ADM
Result
Forced Attribute Display Message
Result
Item
Reset IRD
Item
Result
Force tune to service 102
Result
Normal maximum size (511 bytes) ADM on clear service 102
Forced ADM on scrambled service 101
Forced maximum size(511 bytes) ADM on scrambled service 101
IRDMessage_04.mpg
Display_method
Normal ADM on clear service 102
ItemForce tune to service 102
Forced maximum size (511 bytes) ADM on clear service 102
Forced ADM on clear service 102
Normal maximum size(511 bytes) ADM on scrambled service 101
Attributes of ADM
IRDMessage_01_MsgType05_Recovery05.mpg
Attributes of ADM & duration
Display_method
Display_method
Forced maximum size ADM
Normal ADM
Reset channel order
Item
Item
Forced Attribute Display Message
IRDMessage_01_MsgType05_Recovery00.mpg
Reset IRD
Attributes of ADM & duration
Normal maximum size ADM
Result
CSHSKLH58101203.xlsx
Decoder Verification Test Report - High Level
CONT.-5
TMS TEST
Service 101:
Step01 Time
(m:ss) SoftCell 2 SoftCell 3Pass
Pass
Pass
Pass
Step02 Service 102:
Time
(m:ss) SoftCell 2 SoftCell 3Pass
Pass
Pass
Pass
Service 101:
Step01 Time
(m:ss) SoftCell 2 SoftCell 3Pass
Pass
Pass
Pass
Step02 Service 102:
Time
(m:ss) SoftCell 2 SoftCell 3Pass
Pass
Pass
Pass
Service 101:
Step01 Time
(m:ss) SoftCell 2 SoftCell 3Pass
Pass
Pass
Pass
Pass
Step02 Service 102:
Time
(m:ss) SoftCell 2 SoftCell 3Pass
Pass
Pass
Pass
Pass
Remark
Remark
Remark
Remark
Remark
Remark
TMSTest_service.mpg
Get fingerprinting on service 102
Get attribute display message on service 102
Get fingerprinting on service 101
Get attribute display message on service 102
ErrorCodes
Attribute display message received
Method
Result
Result
Attribute Type
Finger printing received
Result
Result
ErrorCodes
Duration
Method
Method
Attribute display message received
Finger printing received
Attribute
Result
Type
Attribute display message received
Duration
Method
Attribute display message received
ErrorCodes
Result
Get attribute display message on service 102
Get attribute display message on service 101
TMSTest_network.mpg
TMSTest_transport.mpg
Get attribute display message on service 101
Get attribute display message on service 101
ErrorCodes
ErrorCodes
Attribute
Type
Duration
Duration
Method
Method
Type
Attribute display message received
Attribute Type
Duration
Attribute display message received
ErrorCodes
Attribute Type
Attribute
Duration
CSHSKLH58101203.xlsx
Decoder Verification Test Report - High Level
CONT.-6
SCMARRIAGE TEST
Service 101:
Step01 Time
(m:ss) SoftCell 2 SoftCell 3
0:00 ~ 0:10 E16 E16-4 Pass
0:10 ~ 0:50 E29 D29-4 Pass
Pass
Service 101:
Step02&03 Time
(m:ss) SoftCell 2 SoftCell 3Step04 0:00 ~ 1:40 E17/E29 E17-13/D29-4 Pass
Step05 Pass
Pass
Service 101:
Step06&07 Time
(m:ss) SoftCell 2 SoftCell 3
0:00 ~ 0:10 E16 E16-4 Pass
0:10 ~ 0:50 E29 D29-4 Pass
Service 101:
Step08 Time
(m:ss) SoftCell 2 SoftCell 3
0:00 ~ 1:40 E17/E29 E17-13/D29-4 Pass
Service 101/102:
Step09 Result
Pass
Service 101:
Step10 Time
(m:ss) SoftCell 2 SoftCell 3
0:00 ~ 1:40 E17/E29 E17-13/D29-4 Pass
Service 101:
Step11 Time
(m:ss) SoftCell 2 SoftCell 3
0:00 ~ 0:40 E29/E16 D29-4/E16-4 Pass
0:40 ~ 0:50 E16 E16-4 Pass
Remark
Remark
Remark
Remark
Remark
Remark
Remark
SCMarriageVerify.mpg
check the marriage status is the same as in step08
Forced marry & marriage status
OTA_Download.mpg
update the sw in the STB using case10, or case02/08 in step09
SCMarriageUnMarry.mpg
Marriage Status Message
SCMarriageNMarry.mpg
E17
Marriage Status Message
No change of marriage status after power cycle
Marry
SCMarriageFMarry.mpg
No change of marriage status after restore factory settings
Un-marry
SCMarriageVerify.mpg
Result
Result
ErrorCodes
Smartcard marriage status
ErrorCodes
ErrorCodes
ErrorCodes
After power cycle
After restore factory settings
ErrorCodes
Expected Behavior
Result
Result
Result
ErrorCodes
Result
STB is upgraded with a new version S/W
SCMarriageVerify.mpg
insert smart card to the original STB
CSHSKLH58101203.xlsx
Decoder Verification Test Report - High Level
CONT.-7
FLEXIFLASH TEST
Service 101:
Step01 Time
(m:ss) SoftCell 2 SoftCell 3
0:00 ~ 0:20 E00 D100-8 Pass
0:20 ~ 0:40 E30 E108-4 Pass
0:40 ~ 1:00 E16 E16-4 Pass
CUSTOMIZED CA TEST
Service 101:
Step01 Time
(m:ss) SoftCell 2 SoftCell 3
0:00 ~ 0:20 E00 D100-8 Pass
0:20 ~ 0:40 E80 E80-35 Pass
0:40 ~1:00 E29 D29-4 Pass
1:00 ~ 1:20 E81 E81-35 Pass
1:20 ~ 1:40 E29 D29-4 Pass
1:40 ~ 2:00 E00 D100-8 Pass
RSA CHALLENGE TEST
Service 101:
Step01 Time
(m:ss) SoftCell 2 SoftCell 3
0:00 ~ 0:20 E16 E16-4 Pass
0:20 ~ 0:35 E29 D29-4 Pass
0:35 ~ 0:55 E33 E33-4[[1]] Pass
0:55 ~ 1:10 E29 D29-4[[2]] Pass
SURF LOCKING TEST
Service 101 / 102:
Step02 TimeStep03 (m:ss) SoftCell 2 SoftCell 3Step04 0:00 ~ 1:00 E00 D100-8 Pass
1:00 ~ 4:00 E29/E32 D29-4/E32-4 Pass
Step05 Pass
Pass
Pass
Pass
Pass
4:00 ~ 5:00 E00 D100-8 Pass
E29/D29-4 after re-insert smartcard
Remark
Remark
Remark
Remark
RSAChallenge.mpg
Video & Error banners on service 101
Video & Error banners on service 101 ErrorCodes
Result
ResultErrorCodes
ErrorCodes
Get E32 after 2 times switch channel
Get D29 after extract and put back smartcard
Get E32 after 7 times switch channel
E32/E32-4 after 7 times switching channel
Result
ErrorCodes
E32/E32-4 after 7 times switching channel
CustomCA.mpg
Video & Error banners on service 101
E32/E32-4 after 2 times switching channel
Result
Flexiflash.mpg
SurfLocking.mpg
Get E32 after 7 times switch channel
Get D29 when enter second crypto period
E29/D29-4 during 120-180s
CSHSKLH58101203.xlsx
Decoder Verification Test Report - High Level
CONT.-8
RUNNING STATUS TEST
Service 101:
Step01 Time
(m:ss) SoftCell 2 SoftCell 3
0:00 ~ 0:20 E16 E16-4 Pass
0:20 ~ 0:40 E38 E38-32 Pass
0:40 ~ 1:00 E16 E16-4 Pass
1:00 ~ 1:20 E38 E38-32 Pass
1:20 ~ 1:40 E16 E16-4 Pass
1:40 ~ 2:00 E38 E38-32 Pass
2:00 ~ 2:20 E29 D29-4 Pass
2:20 ~ 2:40 E38 E38-32 Pass
2:40 ~ 3:00 E29 D29-4 Pass
3:00 ~ 3:20 E38 E38-32 Pass
3:20 ~ 3:40 E29 D29-4 Pass
3:40 ~ 4:00 E38 E38-32 Pass
Step02 Service 102:
Time
(m:ss) SoftCell 2 SoftCell 3
0:00 ~ 0:20 E00 D100-8 Pass
0:20 ~ 0:40 E38 E38-32 Pass
0:40 ~ 1:00 E00 D100-8 Pass
1:00 ~ 1:20 E38 E38-32 Pass
1:20 ~ 1:40 E00 D100-8 Pass
1:40 ~ 2:00 E38 E38-32 Pass
2:00 ~ 2:20 E00 D100-8 Pass
2:20 ~ 2:40 E38 E38-32 Pass
2:40 ~ 3:00 E00 D100-8 Pass
3:00 ~ 3:20 E38 E38-32 Pass
3:20 ~ 3:40 E00 D100-8 Pass
3:40 ~ 4:00 E38 E38-32 Pass
CONT.-9
HOMING CHANNEL TEST
Service 101:
Step01 Time
(m:ss) SoftCell 2 SoftCell 3
Untested
Untested
RunningStatus.mpg
Remark
running status = 3 on E16-4
running status = 2 on E16-4
Remark
This was stated in the manufacturer's input:
Quote:
18.HOMINGCHANNEL.MPG
a) Homing Channel Download on Smart Card: Untested
This was stated in the manufacturer's input:
Quote:
18.HOMINGCHANNEL.MPG
b) Homing Channel Functionality: Untested
Remark
running status = 4 on D100-8
ErrorCodesResult
ErrorCodesResult
Homing channel parameter on smartcard
running status = 4 on E16-4
running status = 1 on D29-4
running status = 1 on E16-4
running status = 4 on D29-4
Homing channel functionality
ResultErrorCodes
running status = 3 on D29-4
running status = 2 on D29-4
running status = 3 on D100-8
HomingChannel.mpg
Homing Channel verifying
running status = 2 on D100-8
running status = 1 on D100-8
CSHSKLH58101203.xlsx
Decoder Verification Test Report - High Level
Service 101:
V2/V4 V5.0 V5.3/5.4/5.7 V6 V2/V4 V5.0V5.3/5.4
/5.7V6
V5.7 and
/or lowerV6
0:00~0:20 E00 E00 E00 E00 D100-8 D100-8 D100-8 D100-8 D100-8 D100-8 Pass
0:20~0:30 E17 E17[[28]] E00/E-- E16[29] E101-4 E16-4 E109-4 E30-4 E16-4
I34-9 with
black screen
/E16-4[30]
0x51/0x1D 0x6A/0x6A /E30
0:30~1:10 E29 E29 E29 E29 D29-4 D29-4 D29-4 D29-4 D29-4 D29-4 Pass
1:10~1:30 E17 E17/E-- E29/E-- E16[31] E101-4 E16-4 E109-4 E30-4 E16-4[32]
D29-4 with
black screen
/E16-4[33]
0x51/0x1D 0x6A/0x6A /E30
1:30~1:50 E29/E38 E29/E38 E29/E38 E29/E38 D29-4 /E38-32D29-4 /E38-
32D29-4 /E38-32 D29-4 /E38-32 D29-4 /E38-32 D29-4/E38-32
Pass
1:50~2:00 E00 E00 E00 E00 D100-8 D100-8 D100-8 D100-8 D100-8 D100-8 Pass
Pass
Pass
Pass
Service 102:
V2/V4 V5.0 V5.3/5.4/5.7 V6 V2/V4 V5.0V5.3/5.4
/5.7V6
V5.7 and
/or lowerV6
0:00~0:20 E00 E00 E00 E00 D100-8 D100-8 D100-8 D100-8 D100-8 D100-8 Pass
0:20~0:30 E17 E17/E-- E00/E-- E16[34] E101-4 E16-4 E109-4 E30-4 I34-9 > E16-4
I34-9 with
black screen
/E16-4[36]
0x--/0-- 0x6A/0x6A /E30 or E16
0:30~1:10 E29 E29 E29 E29 D29-4 D29-4 D29-4 D29-4 D29-4[35] D29-4 Pass
1:10~1:30 E17 E17/E29/E-- E29/E-- E29>E16 E101-4 E16-4 E109-4 E30-4 D29-4>E16-4
D29-4 with
black screen
/E16-4[38]
0x6A/0x6A /E30[37] or E16
1:30~1:50 E29/E38 E29/E38 E29/E38 E29/E38 D29-4 /E38-32D29-4 /E38-
32D29-4 /E38-32 D29-4 /E38-32 D29-4 /E38-32 D29-4/E38-32
Pass
1:50~2:00 E00 E00 E00 E00 D100-8 D100-8 D100-8 D100-8 D100-8 D100-8 Pass
Pass
Pass
Pass
Pass
SoftCell 3.8 and/or higher
Expected ErrorCodes
ResultSoftCell2.x
SoftCell 3.6.24 and/or lower SoftCell 3.6.25 ~ 3.6.28
SoftCell 3.8 and/or higher Remark
Pass
RemarkResult
Pass
EMM STRESS SOAK TEST
Normal announcements
Performance after 12 hours
Switching channels after 12 hours
Expected ErrorCodes
SoftCell2.xSoftCell 3.6.24 and/or lower
SoftCell 3.7
SoftCell 3.6.25 ~ 3.6.28
Normal announcements
Time
(m:ss)
Performance after 12 hours
Switching channels after 12 hours
Pass
EMMStressSoak.mpg
Time
(m:ss)SoftCell 3.7
CSHSKLH58101203.xlsx
Decoder Verification Test Report - High Level
CONT.-10
Service 101:
Time
(m:ss) SoftCell 2 SoftCell 3Initialize 2 v5.4 patch level 12 (or higher) cards, or 2 ICE2 smartcards. 0:00 ~ 0:20 E16 E16-4 Pass
0:20 ~ 0:40 E29 D29-4 Pass
Set user profile(s). Pass
Service 101 / 102:
Svc101: MR level in ECM =9 Time
Svc102: MR level in ECM =12 (m:ss) SoftCell 2 SoftCell 3
0:00 ~ 1:40 N/A D29-4/E136-4 Pass
Pass
Switch to svc102: 'maturity rating block outs' Pass
For v5.4 cards:
Enter pwd of profile 1: 'maturity rating block outs' Pass
Enter pwd of profile 2: AV of svc102 Pass
For ICE2 cards:
Enter invalid pwd: 'maturity rating block outs' Pass
Enter correct pwd: AV of svc102 Pass
For both v5.4 and ICE2 cards:
Zap channels and AV running on both service Pass
Reinsert cards, switch to svc101, AV running Pass
Switch to svc102: 'maturity rating block outs' again Pass
For v5.4 cards:
Disable maturity rating on the IRD Pass
AV running on svc102 Pass
Enable maturity rating Pass
AV blocked on svc102: 'maturity rating block outs' Pass
Service 101 / 102:
Svc101: MR level in ECM =6 Time
Svc102: MR level in ECM =12 (m:ss) SoftCell 2 SoftCell 3
0:00 ~ 0:50 E23 / E25 D23-12/D25-12
Untested
0:50 ~ 1:40 E24 / E25 D24-12/D25-12 Untested
Untested
Check IPPV purchase menu (if supports) Untested
Switch to svc102: 'maturity rating block outs' Untested
For v5.4 cards:
Enter pwd of profile 1: 'maturity rating block outs' Untested
Enter pwd of profile 2: expected result Untested
For ICE2 cards:
Enter correct pwd to get expected result Untested
For both v5.4 and ICE2 cards:
Zap channels and AV running on both service Untested
Reinsert cards, switch to svc101: expected result Untested
Switch to svc102: 'maturity rating block outs' again Untested
Same as above.
Same as above.
Same as above.
Same as above.
Remark
Same as above.
Same as above.
Same as above.
Same as above.
Same as above.
Remark
This was stated in the manufacturer's input:
Quote:
20.MATURITY RATING TEST
III.MRIppvTest.mpg: Untested
Same as above.
Remark
Result
MATURITY RATING TEST
EnableMRConf.mpg
ErrorCodes
For v5.4 cards: set 2 user profiles-level 11 and 14MRBasicTest.mpg
ErrorCodesResult
Tune to svc101: 'No maturity rating block outs'
Result
Tune to svc101: 'No maturity rating block outs'
MRIppvTest.mpg
ErrorCodes
CSHSKLH58101203.xlsx
Decoder Verification Test Report - High Level
CONT.-11
Service 101:
Step01
V5.3/5.4/5.7 V6 V5.3/5.4/5.7 V6 V5.3/5.4/5.7 V6
0:00~0:10 E107-4 E107-4 E107-4 E107-4 E16-4
E101-4 >E30-
4[42] Untested
0:10~0:20 D29-4 D29-4 D29-4[[43]] D29-4[[44]] D29-4 D29-4 Untested
0:20~0:30 E109-4 E30-4>E101-4 E16-4 E30-4[45] >E101-4 E16-4
E16-4[46]
>E101-4 Untested
Service 101:
Step02
V5.3/5.4/5.7 V6 V5.3/5.4/5.7 V6 V5.3/5.4/5.7 V6
0:00~0:10 E109-4 E101-4>E30-4 E16-4 E101-4>E30-4 E16-4
E101-4 >E30-
4[47] Untested
0:10~0:20 E107-4 E107-4 E107-4 E107-4 D29-4 D29-4 Untested
0:20~0:30 E107-4 E107-4 E107-4 E107-4 E16-4
E16-4[48]
>E101-4 Untested
Service 101:
Time
(m:ss)Step01 0:00 ~ 0:20 Untested
Step02 0:20 ~ 0:40 Untested
Step03 0:40 ~ 1:10 Untested
Step04 1:10 ~ 1:20 Untested
Step05 1:20 ~ 1:30 Untested
SoftCell 3.10 running on
Dual Mode
SoftCell 3.10 running on
SoftCell 3.8, and/or higher
Time
(m:ss)
Error Codes
SoftCell 3.6.24 and/or lower SoftCell 3.6.25 ~ 3.6.28
SoftCell 3.7 SoftCell 3.8, and/or higher Dual Mode
SecureChipUnpair.mpg
Same as above.
Same as above.
Same as above.
Result
Result
Remark
This test case is only available for advanced security IRDs.
See Note I.
Same as above.
Same as above.
Remark
Result RemarkSCell3
ADVANCED SECURITY STB
SecureChipPair.mpg
PERSIST STORAGE TEST
This bitstream is used for IRDs which do not support SCMarriage function.
Same as above.
Same as above.
Check Video/CA state transition.
Error CodesTime
(m:ss)
SoftCell 3.6.24 and/or lower
SoftCell 3.7
SoftCell 3.6.25 ~ 3.6.28
Play-out the OTA_Download.mpg, and scan service information.
Pause the playing-out at 50~60 seconds, restore factory settings on the
Pause the playing-out at 50~60 seconds, then power cycle the IRDs,
Same as above.
Same as above.
PS_CILAYER.mpg
Perform the test step10 in Appendix D.
E16-4
D29-4
E33-4
D29-4
E16-4
Error Codes
CSHSKLH58101203.xlsx
Decoder Verification Test Report - High Level
Result Remark
Pass
Untested This test case is only available for MCA operator
Untested
This was stated in the manufacturer's input:
Quote:
24. ADDITIONAL TESTS
IV. PVR
a) PVR Record: Untested
Untested
This was stated in the manufacturer's input:
Quote:
24. ADDITIONAL TESTS
IV. PVR
b) PVR Playback: Untested
Untested
This was stated in the manufacturer's input:
Quote:
21. SOLTEST.MPG
a) STB Operator Locking: Untested
Untested
This was stated in the manufacturer's input:
Quote:
24. ADDITIONAL TESTS
V. IPPV: Untested
Untested
This function was not supported according to the
manufacturer's input.
Note:
The above cases were tested by the following head-end:
2.16.1.2 configuration in Simulcrypted mode Si generated
ADVANCED TEST
Test case
I. Regionalization
II. Parental Control
III. PVR
a) PVR Record
b) PVR Playback
by Pisys.
PIsys build
V. IPPV
IV. SOL
VI. LPPV
CSHSKLH58101203.xlsx
Decoder Verification Test Report - High Level
GENERAL ISSUES
Issues reported under the 'General Issues' are some common issues which can't be
included in the above test cases.
CDI engineer will make a decision if Issues reported in this section lead to failure of DVT.
CSHSKLH58101203.xlsx
_________________________________________________________________________________________Decoder Verification Test Report - High Level
Signature: Date: 12/21/2010SENIOR ENGINEER
(Stamp in appropriate Test Result block above)
Test result is based on the softcell integration guide or specific
operator user requirement specifications. Explanation of result or special conditions noted:
The DVT is approved based on the confirmation from the Skylink that they do not have
fingerprinting license.
APPROVEFAIL
PRODUCT ASSESMENT (Place Stamp in appropriate result block below)
TEST RESULTNOTE: Irdeto Access Verification covers only CA and loader functionality and does not take
away the operator's responsibility for final approval of all other aspects of the software
functioning in the operator's environment (field trial).
Manufacturer
COSHIP
Driver Version
Not Stated
Model No.
N8760B
DVT EngineerName Date Sign
Sunny Ma 3-Dec-10
58
DVT CERTIFICATION
Report No. Date Tested Operator Software Version
110SkylinkCSHSKLH58101203 12/3/2010
Hardware Version
CSHSKLH58101203.xlsx 6
Top Related