CONTENTSPART 1 Implant Instrument06 New Bone Chip Maker with Stopper
07 Fixture & Screw Remover Kit
08 Masai Drill
09 Magnetic Lateral Appoach Drill Kit / Hydro Lift System
10 Sinus Master II
11 Split Master II
13 PRF-BOX
14 GBR-KIT
15 Bone Screw Master
PART 2 Oracle Anchor System18 Orthodontic Screw
20 ORTHOPLATE
PART 3 General Instrument22 Osteotome – Rigid / Thermos / Gaori, Split Chisel,
Ochsenbein Chisel, Sinus Lift, Sinus Lift Crestal
23 Tissue Punch & Trephine Bur & Saw Mini / Tissue Punch / Trephine Bur
24 Titanium Suction & Bone Collect Set, Photo Contrast
Root Elevator Tip Exchange Type
25 Impant Gauge / Ridge Mapping Gauge / Depth Gauge,
Venus Gauge / Apollo Gauge / Gag Gauge, Zygoma Gauge / Castro Gauge
26 Cassette, Pincette / Tissue Forcep, Mes Holder / Crown Remover / Abutment & Crown Gripper
27 Periotome, Periotome, The One Curette, Gracey Curette, Bone Curette,
Knife, Explorer / Mirror & Mirror Hand Handle, Bone Rongeur / Hemo / Towel Clamp / Tissue Nipper
28 Scaler, Excavator, Needle Holder, Scissor
29 Extraction Forcep / Root Forcep / Implant Forcep, Retractor
30 CONTACT US
PART 1
Implant InstrumentNew Bone Chip Maker with Stopper
Fixture & Screw Remover Kit
Masai Drill
Magnetic Lateral Appoach Drill Kit
Hydro Lift System
Sinus Master Kit
Split Master II
PRF-BOX
GBR-KIT
Bone Screw Master
Bone Tac Master
Mesh
Membrane Fixed Screw Set
New Bone Chip Makerwith Stopper
BCM2 New Bone Chip Maker
Bone collection greatly increased to more than 30%
BCM2-01-01
Ø3.4
BCM2-01-02
Ø3.9
BCM2-01-03
Ø4.2
BCM2-01-04
Ø5.2
BCM2-01-05
Bone Remover
BCM-01-08
Stopper-7mm
BCM-01-06
Stopper-11.5mm
BCM-01-09
Stopper-5mm
BCM-01-07
Stopper-10mm
Detail View
Component
Character of Bone Chip Maker
Direction for Use
1. Core blade attached to outer drill, makes it even more stable while drilling and more room for bone powders.
2. New BCM can be assembled stoppers, so you can make a hole as desired length.(World’s First)
3. Can collect the bone powder at the same time while drilling and save cost for bone graft.
4. Cutting Power is excellent due to blade with Z shape.
1. Join the stopper of desired size into Bone Chip Maker Tip.
2. Make a hole on the bone by Bone Chip Maker Tip.
3. Separate Tip from Hand-piece, and disassemble Bone Chip Maker Tip with Bone Remover.
4. Collect the bone out of inside of the drill with tale of the Bone Remover.
5. After Using, disinfect Bone Chip Maker Tip with Ultrasonic Clean & Autoclave
New Bone Chip Maker Tip New Remover & Stopper
BCM2
New Bone Chip Maker
2014 MCT MR.CURETTE 06
Fixture & Screw Remover Kit
FRW-01
FRK-01 SRK-01
FRD-01(3EA)
Fixture Remover Kit Screw Remover kit
Fixture Remover Kit Screw Remover Kit
1. Excellent combination of Remover and Trephine Bur
2. Trephine bur that can remove implant without bone loss.
3. One remover applicable to all sizes of implants
4. Solid durability
1. Pick certain guide for used abutment.
2. Attach the guide and hold it with guide holder.(SRG-H)
3. Use screw remover drill to make hold in the core of broken
screw in reverse way.
4. Use Tap drill to remove the broken screw in reverse way.
FSRK-01
Fixture Screw Remover Kit
2014 MCT MR.CURETTE 07
SRG-EM
SRG-ER
SRG-IO
SRG-SH
SRG-TSV 3.7/4.1
SRG-TSV 4.7
SRD-01 Drill SRT-01 Tap SRG-H
FRT-5.2/5.9
Ø5.0
FRT-5.7/6.4
Ø5.5
FRT-6.2/6.9
Ø6.0
FRT-3.7/4.4
Ø3.5
FRT-3.9/4.6
Ø3.7
FRT-4.3/5.0
Ø4.1
FRT-4.7/5.4
Ø4.5
Video / www.mrcurette.co.kr
Magnetic Drill
Component
Direction for Use
It is magnetic drill which delete maxillary bone without damage of sinus membrane.
Using Alnico Magnet which can bearable with 400˚C, magnetic of drill is not change with autoclave
temperature.
Character of Magnetic Drill – Three Kinds Safety devices
1. Blade of drill have groove in the diamond bar, safety and cutting force is excellent, and even though drill reach
sinus membrance, membrance is not damaged.
2. Masai drill are tripped against sill which made by initial drill, and even if presssed at moment of bone punching,
masai drill did not go through into the hole.
3. At the moment of bone punching, upper part of masai drill was separate from the Lower part by magnet force
and stop operate. It can perceive by hand, also can confirm through separation of gear.
Aqua Tip
1. After making hole with Masai drill use aqua tip to lift
up the membrane.
2. Engage the Aqua tip onto the hole.
3. Fill the syringe with saline water and join with hose.
4. Place the syringe into the roller and stick the hose
with Aqua tip.
5. To lift up the membrane, turn the roller.
CD-2.0
Ø2.0
CD-2.5
Ø2.5
CD-2.8
Ø2.8
CD-3.3
Ø3.3
CD-3.8
Ø3.8
CD-4.2
Ø4.2
MAS2-01-02
Ø3.3/4.21mm
MAS2-01-01
Ø2.8/3.81mm
MAS2-01-03
Ø2.8/3.82mm
MAS2-01-04
Ø3.3/4.22mm
Magnetic Drill
WSL-3.8
WSL-4.2
WSL-3.8
WSL-4.5
MAS-02-01
1mm
MAS-02-05
5mm
MAS-02-02
2mm
MAS-02-06
6mm
MAS-02-03
3mm
MAS-02-07
7mm
MAS-02-04
4mm
MAS-02-08
8mm
Stopper Aqua Tip
WID-01
Ø6.51mm
WID-02
Ø6.52mm
WMD-01
Ø6.51mm
WMD-02
Ø6.52mm
Window Magnetic Drill Initial Drill
Masai Drill II(Magnetic Sinus Artifical Intellgence Drill)
MAS2-01
Masai Drill II
2014 MCT MR.CURETTE 08
Aqua Tip
1. Maxillary sinus membrane can be easily by hydrostatic pressure.
2. Various size of aqua tip(2.8 3.0 3.3 3.5 3.8 4.0)
3. Compatible to a variety of maxillary sinus elevation drill.
4. Sanitary membrane elevation due to use of a disposable syringe.
5. Because treatment of creastal approach is possible within 3mm in residual bone, the time and cost is reduced.
6. Desired amount of bone can be easily implanter.
Hydro Lift System
Magnetic Lateral Appoach Drill Kit
Hydro Lift System
Video / www.mrcurette.co.kr
WSL-01
Hydro Lift System
WSL-01-01
WSL-01-2.8
WSL-01-3.5
WSL-01-3.0
WSL-01-3.8
WSL-01-3.3
WSL-01-4.0
WSL-01-02
WID-01
Ø6.5 1mm
WID-02
Ø6.5 2mm
WMD-01
Ø6.5 1mm
WMD-02
Ø6.5 2mm
WMD-03 RMV-01
MLA-01
2014 MCT MR.CURETTE 09
Sinus Master II
Crest Drill Stopper
1. Maxillary bone can be drilled efficiently with Sinus Master Kit.
2. After measuring the cortical bone length, steadily approach with Crest Drill with stopper until last 1mm.
3. For the last 1mm, finish with Crest Reamer with 1mm Stopper joined. Drill mainly relies on the Diamond particles.
4. Use sinus lift instruments to lift up the sinus membrane.
SMK2-01
Sinus Master II
Crest Reamer
SMK2-02-2.8
Ø2.8
SMK2-02-3.3
Ø3.3
SMK2-02-3.8
Ø3.8
SMK2-02-4.2
Ø4.2
Lateral Drill
SMK-03-6.5-1 SMK-03-6.5-2
Lateral Reamer
SMK2-03-2 SMK2-03-3
CD-2.0
Ø2.0
CD-2.5
Ø2.5
CD-2.8
Ø2.8
CD-3.3
Ø3.3
CD-3.8
Ø3.8
CD-4.2
Ø4.2
MAS-02-01
1mm
MAS-02-05
5mm
MAS-02-02
2mm
MAS-02-06
6mm
MAS-02-03
3mm
MAS-02-07
7mm
MAS-02-04
4mm
MAS-02-08
8mm
BNC-03 Bone Carrier
YSL-01 Sinus Lift 1
YSL-02 Sinus Lift 2
YSL-03 Sinus Lift 3
YSL-04 Sinus Lift 4
SLC-02 Sinus Lift Crestal 2
2014 MCT MR.CURETTE 10
PD-1.8
Ø1.8
SAW-01
Ø7
BCT-01-01 SPC-02
4mm Straight
BNC-01
SBE-2.6
Ø2.6
SAW-02
Ø10
SPC-03
4mm Curved
SBE-3.0
Ø3.0
SPC-04
6mm Straight
SPC-01 (SET)
SS-BAR
SBE-3.4
Ø3.4
SPC-05
6mm Curved
SBE-3.8
Ø3.8
SBE-4.3
Ø4.3
Pliot Drill/ Bone Expander
SAW
Split ChiselBone Carrier
Split Master IIProduct Combination forSingle Implanting and Multi Implanting
Video / www.mrcurette.co.kr
Split Master II
Direction for Use
Bone Expander1. Measure the thickness of bone where implant going to be placed.
2. Make a initial hole with Pilot Drill.
3. Expand the hole using the Bone Expander of desired size.
4. If the distance is too short to interfere with neighboring tooth,
the distance can be extended by using extension tool.
Bone Crester1. Split ridge bone lengthwise by the desired length using the saw.
2. Make it deep enough for spreader by using split chisels.
3. Put in more than 2 spreaders suitable to the length.
4. To expand the bone gradually, screw each spreaders little by little..
SSM-02
Split Master II
22mm
Spreader + Screw
2014 MCT MR.CURETTE 11
It maintains the initial fixing power of implant to increase success rate of implant
without long stretched ridge when multi-implanting with narrow bone width.
Bone Expander
Bone Crester
PD-1.8
Ø1.8
BCT-01-01
SBE-01 Bone Expander
BCT-01 Bone Crester
SBE-2.6
Ø2.6
SBE-3.0
Ø3.0
SBE-3.4
Ø3.4
SBE-3.8
Ø3.8
SBE-4.3
Ø4.3
MCT 1White
2Orange
3Red
4Blue
5Green
Apical
2.6 3.0 3.4 3.8 4.3
4mm
6mm
8mm
10mm
Length 17 17 17 17 17
Pilot Drill/ Bone Expander
Spreader + Screw
It used for single implant with narrow bone width or weak bone to expand bone or upgrade bone.
SAW-02
Ø10
Adapter A
RCW-01
Adapter 1
22mm
SAW-01
Ø7
SAW-02
Ø10
22mm
2014 MCT MR.CURETTE 12
Saw/Saw Cover Set
PRF BOX
SAW-05
Ø8
SAW-03
Ø8
SAW-06
Ø10
SAW-04
Ø10
PRF-BOX(Plate – Rich - Fibrin )
Video / www.mrcurette.co.kr
Character of PRF BOX1. Prevent from infection by not using gauze
2. Can use Growth Factor which collected by PRF BOX while Bone
Grafting. It is helpful for formation of bone.
Direction for Use1. Draw 5cc blood from patients.
2. Extract PRF Gel by centrifuge.
3. Put the yellow part of PRF Gel. And press by press board.
4. Use PRF membrane which is detached from liquid.
SAW-01
Ø7
SAW-02
Ø10
22mm32mm
45mm
PRF-01-03
Lid of Case
PRF-01-01
Press Board
PRF-01-02 PRF-01-04
Bottom Board & Case
2014 MCT MR.CURETTE 13
SAW-COVER
Saw Cover Set
PRF-BOX
GBR-KITProduct CombinationBone Screw, Bone Chip Maker, Mesh
Fixing Membrane
Block Bone
Bone Screw
Mesh
Driver Handle SDH-01
New Bone Chip Maker
Driver Shaft
Code D*L
AU-14-006 Ø1.4 X 6
AU-14-008 Ø1.4 X 8
AU-14-010 Ø1.4 X 10
AU-14-012 Ø1.4 X 12
Code D*L
AUG-16-006 Ø1.6 X 6
AUG-16-008 Ø1.6 X 8
AUG-16-010 Ø1.6 X 10
AUG-16-012 Ø1.6 X 12
Code D*L
AU-12-003 Ø1.2 X 3
AU-12-004 Ø1.2 X 4
AU-12-006 Ø1.2 X 6
Code D*L
AU-18-006 Ø1.8 X 6
AU-18-008 Ø1.8 X 8
AU-18-010 Ø1.8 X 10
AU-18-012 Ø1.8 X 12BCM2-01-01
Ø3.4
MM-13-02
30*30
BCM2-01-02
Ø3.9
MM-13-01
20*15
BCM2-01-03
Ø4.2
MM-25-01
20*15
Pilot Drill
PD-1.0
Ø1.0
PD-1.2
Ø1.2
PD-1.4
Ø1.4
PD-1.6
Ø1.6
Saw
SAW-01
Ø7
SAW-02
Ø10
SAW-05
Ø8
BCM2-01-04
Ø5.2
MM-25-02
30*30
IHA-04 IHA-05 IHA-06
use for handpiece use for handle
Plus Type
BCM-01-08
Stopper-7mm
BCM-01-06
Stopper-11.5mm
BCM-01-09
Stopper-5mm
BCM-01-07
Stopper-10mm
Hole Diameter : Ø1.3, Ø0.25
Thickness : 0.1T
2014 MCT MR.CURETTE 14
Bone Screw Master
Size of Bone Screw
Bone Tac Master
PD-1.0
Ø1.0
BT-3.5 Bone Tac 3.5mm
BT-4.5 Bone Tac 4.5mmTBM-01 Titanium Bone Tac Master
Bone Tac Case
PD-1.2
Ø1.2
IHA-04PD-1.4
Ø1.4
IHA-05PD-1.6
Ø1.6
IHA-06
use for handpiece use for handle
Code D * L Code D * L Code D * L Code D * L Code D * L
AU-12-004 Ø1.2 X 4 AU-14-004 Ø1.4 X 4 AU-16-004 Ø1.6 X 4 AU-18-004 Ø1.8 X 4 AU-20-004 Ø2.0 X 4
AU-12-006 Ø1.2 X 6 AU-14-006 Ø1.4 X 6 AU-16-006 Ø1.6 X 6 AU-18-006 Ø1.8 X 6 AU-20-006 Ø2.0 X 6
AU-12-007 Ø1.2 X 7 AU-14-007 Ø1.4 X 7 AU-16-007 Ø1.6 X 7 AU-18-007 Ø1.8 X 7 AU-20-007 Ø2.0 X 7
AU-12-008 Ø1.2 X 8 AU-14-008 Ø1.4 X 8 AU-16-008 Ø1.6 X 8 AU-18-008 Ø1.8 X 8 AU-20-008 Ø2.0 X 8
AU-12-010 Ø1.2 X 10 AU-14-010 Ø1.4 X 10 AU-16-010 Ø1.6 X 10 AU-18-010 Ø1.8 X 10 AU-20-010 Ø2.0 X 10
Pilot Drill
If can contain 21EA Bon Tac.
Driver Shaft Driver Body
MAL-01 Mallet 20mm
BDH-01 Bone Tac Holder
TBM-02
2014 MCT MR.CURETTE 15
Mesh
Membrane Fixed Screw Set
TMM-01 Titanium Mesh Master
SCI-09 Mesh Cutting Scissor
MM-13-01 15*20
MM-25-01 15*20
MM-56-01 15*20 MM-42-01 15*20
TMS-02
MM-56-02 30*30 MM-42-02 30*30
MM-13-02 30*30
MM-25-02 30*30
MM-13-03 60*30
MM-42-03 60*30MM-56-04 100*100 MM-42-04 100*100
Thickness : 0.1T
Thickness : 0.1T
MM-25-03 60*30
Hole Ø1.3
Hole Ø0.25
Hole Hex Ø1.56 Hole Hex Ø0.42
Pilot Drill Shaft
Code D*L
AU-12-003 Ø1.2 X 3
AU-12-004 Ø1.2 X 4
AU-14-004 Ø1.4 X 4
PD-1.0
Ø1.0
IHA-06IHA-04
MM-56-03 60*30
2014 MCT MR.CURETTE 16
PART 2
OracleAnchor SystemOrthodontic Screw
ORTHOPLATE
OracleAnchor System (Orthodontic Screw)
2014 MCT MR.CURETTE 18
Instrument
Driver Handle
Driver Shaft
Drill
SDH-02
TOS-01 Master Kit MSA-01 Mini SA Kit MOS-01 Mini OS Kit MOA-01 Mini OA Kit MTI-01 Mini Tiny Kit
SDH-01
IHA-09Tiny Contra Angle
IHA-03SA, OS, OA Driver Handle
IHA-10Tiny Driver Handle
IHA-02
IHA-01SA, OS, OA Contra Angle
SA, OS, OA Contra Angle Long
PD-1.0Ø1.0
PD-1.2Ø1.2
PD-1.4Ø1.4
PD-1.6Ø1.6
2014 MCT MR.CURETTE 19
ORTHOPLATEAhn’s Anchorage System
2014 MCT MR.CURETTE 20
A-P-009(B41)
AAS-01 Ahn’s Anchorage System
A-P-003(B21)
A-P-001(P11)
A-P-007(B32-L)
A-P-005(B31-L)
A-P-008(B32-R)
A-P-006(B31-R)
A-P-004(B22)
A-P-002(P12)
PART 3
General Instrument
Osteotome – Rigid / Thermos / Gaori
Split Chisel / Ochsenbein Chisel / Sinus Lift / Sinus Lift Crestal
Tissue Punch / Trephine Bur
Photo Contrast
Titanium Suction & Bone Collect Set
Root Elevator Tip Exchange Type
Gauge
Cassette / Pincette / Tissue Forcep
Mes Holder / Crown Remover / Abutment & Crown Gripper
Periotome / Periosteal Elevator / The One Curette
Gracey Curette / Bone Curette / Knife
Bone Curette / Bone Rongeur / Hemo / Towel Clamp
Scaler / Excavator / Needle Holder
Extraction Forcep / Root Forcep / Implant Forcep
Character
Best Safety with Double Stopper
Handle to Minimize Malleting
Size-Distinguishable Color Code
Osteotome - Rigid
Rigid 01 Rigid 02 Rigid 03 Rigid 04 Rigid 05
OSR-01 OSR-02 OSR-03 OSR-04 OSR-05
2.5 3.0 3.5 4.0 4.5
Osteotome - Thermos
Thermos 01 Thermos 02 Thermos 03 Thermos 04 Thermos 05
OST-01 OST-02 OST-03 OST-04 OST-05
2.2 ~ 2.7 2.7 ~ 3.2 3.2 ~ 3.7 3.7 ~ 4.2 4.2 ~ 4.7
Osteotome - Gaori
Gaori 01 Gaori 02 Gaori 03 Gaori 04 Gaori 05
OSG-01 OSG-02 OSG-03 OSG-04 OSG-04
2.5 3.0 3.5 4.0 4.5
Split Chisel
Osteotome – Rigid / Thermos / Gaori
Sinus Lift
0.5mm thickness used to widen narrow area in surgery. Ochsenbein Chisel CO3 is a product to incorporate former separate up and
Down into one with which up and down can be used simultaneously
Ochsenbein Chisel
Sinus Lift Crestal
SPC-02 4mm StraightOBC-CO1 Ochsenbein Chisel(UP)
OBC-CO2 Ochsenbein Chisel(DOWN)
OBC-CO3 Ochsenbein Chisel(UNIVERSAL)
OSR-SET Osteotome Rigid Set
SPC-01 Split Chisel Set
YSL SET Sinus Lift Set
OST-SET Osteotome Theroms Set OSG-SET Osteotome Gaori Set
SPC-03 4mm Curved
SPC-04 6mm Straight
SPC-05 6mm Curved
YSL-01 Sinus Lift 1
YSL-02 Sinus Lift 2
YSL-03 Sinus Lift 3
YSL-04 Sinus Lift 4
YSL-05 Sinus Lift 5
SLC-02 Sinus Lift Crestal 2
SLC-03 Sinus Lift Crestal 3
45°
90°
SLC-04 Sinus Lift Crestal 4
2014 MCT MR.CURETTE 22
Tissue Punch Trephine Bur (Long Type) Saw
Tissue Punch
Trephine Bur
Fixture Remover Trephine Bur
Tissue Punch (Special Type)
Trephine Bur (Long Type)
Tissue Punch / Trephine Bur
2014 MCT MR.CURETTE 23
FRT-5.2/5.9
Fixture Size Ø5.0
FRT-5.7/6.4
Fixture Size Ø5.5
FRT-6.2/6.9
Fixture Size Ø6.0
FRT-3.7/4.4
Fixture Size Ø3.5
FRT-3.9/4.6
Fixture Size Ø3.7
FRT-4.3/5.0
Fixture Size Ø4.1
FRT-4.7/5.4
Fixture Size Ø4.5
TAT-02 Tissue Punch & Trephine Bur & Saw Mini SAW-01
Ø7
TIP-3.5
Ø3.5
TPB-03
Ø3.0
TPL-03
Ø3.0
TPB-04
Ø4.0
TPL-04
Ø4.0
TPB-05
Ø5.0
TPL-05
Ø5.0
TPL-05
Ø5.0
TPB-06
Ø6.0
TPL-06
Ø6.0
TPL-06
Ø6.0
TPB-07
Ø7.0
TPL-07
Ø7.0
TPL-07
Ø7.0
TPB-08
Ø8.0
TPL-08
Ø8.0
TPL-08
Ø8.0
TIP-4.0
Ø4.0
TIP-4.0
Ø4.0
TTI-4.0
Ø4.0
TIP-4.5
Ø4.5
TIP-4.5
Ø4.5
TIP-5.0
Ø5.0
TIP-5.0
Ø5.0
TTI-5.0
Ø5.0
TIP-5.5
Ø5.5
TIP-5.5
Ø5.5
SAW-02
Ø10
Titanium Suction & Bone Collect Set
Photo Contrast
Root Elevator Tip Exchange Type
Adapter for Disposable Suction
Titanium Suction Set
1. All Components can be sterllized.
2. It is processed by titanium to prevent static electricity and not to distrub healing up of implants.
3. This is a light suction line easy for long-term surgery.
Titanium Bone Collector Set
1. It can solve suction and bone collecting at one shot.
2. It is disinfect bone collector net, not a disposable bone collector net.
SUT-01
BOS-01 Bone Scraper(Straight)
TBC-02 Bone Collector Net
TBC-02 Bone Collector Net
Titanium Suction & Bone Collector Set
Components:Titanium Suction Tip 2EA,Titanium Bone Collector Tip,Bone Collector Net,Suction line, Adapters.
1. The Silicone Handle of whirlpool Type prevents the fatipue which is caused by long time use.
2. It is very ecnomical by tip exchange type.
3. Set Composition : Tip 3EA + Silicone Handle + Wrench
It makes the photo background black uniformly to improve picturequality.
<Straight Tip>
<10˚ Curved Tip>
< 20˚ Curved Tip>
Wrench
RET-SET Root Elevator Set(Straight Tip,10˚ Curved Tip,20˚ Curved Tip,Silicone Handle,Wrench)
2014 MCT MR.CURETTE 24
PTC-01
Photo Contrast 1
PTC-02
Photo Contrast 2
PTC-03
Photo Contrast 3
Impant Gauge / Ridge Mapping Gauge / Depth Gauge
Venus Gauge / Apollo Gauge / Gag Gauge
Zygoma Gauge / Castro Gauge
Implant Gauge
Gauge to measure interval and length of implants.
Ridge Mapping Gauge
It can measure bone thickness without tissue incision.
Venus Gauge / Apollo Gauge
It is used to measure tooth length of edentulos patients.
Accurate measurement is possible with anxiety non-provoking round end.
Zygoma Gauge
It can measure the between left and right face from the center.
Castro Gauge
Venus Gauge / Apollo Gauge
It is used to measure tooth length of edentulos patients.
Accurate measurement is possible with anxiety non-provoking round end.
Gag Gauge
Depth Gauge
GAU-03 Implant Gauge
DSG-01 Depth Gauge 1
DSG-02 Depth Gauge 2
GAU-06 Zygoma Gauge
GAU-01
Venus Gauge
GAU-02
Apollo Gauge
GAU-09
Gag GaugeIn case of edentulos patients, by the difference in length Between A and B can
determine the thickness of block Arch and tooth size.
GAU-04 Ridge Mapping Gauge
It can be conveniently read since the scaleMark is located in the back side.
GAU-10 Castro Gauge (Curved-Large)
GAU-08 Castro Gauge (Curved)
GAU-07 Castro Gauge (Straight)
2014 MCT MR.CURETTE 25
Cassette
It is conveniently opened and closed.
It is fixed firmly regardless of shape.
It is not be rusted.
CST-07
Cassette No.7
CST-09
Cassette No.9
CST-05
Cassette No.5
CST-03
Cassette No.3
Mes Holder / Crown Remover / Abutment & Crown Gripper
Mes Holder
It is rotatable, provides comfortable wrist feeling and available for any shape-cut.
It is very easy to mount knife blade since it is processed by precision machine and end
part Of have convenient graduated ruler.
Crown Remover
Remover Tip exchange type which is very economical.
It can use vertical and horizontal, and is very convenient.
Abutment & Crown Gripper
MEH-01 Mes Holder(Straight)
MEH-02 Mes Holder(Curved)
MEH-03 Mes Holder(Stick) ACG-01 Abutment & Crown Gripper
CRO-01 Crown Remover Set
Exchangeable tip
2014 MCT MR.CURETTE 26
Pincette / Tissue Forcep
PIN-01
GeneralPincette
PIN-02
WidePincette
PIN-03
LockingPincette A
PIN-04
LockingPincette B
TIF-01
Double LockTissue Forcep
TIF-02
EdsonTissue Forcep
12cm
TIF-03
EdsonTissue Forcep
12cm(No Tooth)
TIF-04
EdsonTissue Forcep
16cm
Periotome
Bone Curette
Explorer / Mirror & Mirror Hand Handle
The One Curette
Periosteal Elevator
Knife
Bone Rongeur / Hemo / Towel Clamp
Gracey Curette
PET-01 Periotome 1
TOC-01 The One Curette
GC10 1-2 Gracey Curette10 1-2
TOC-02 The One Curette(Mini Type)
PET-02 Periotome 2 PEE-02 Periosteal Elevator P24G
PEE-04 Periosteal Elevator PrichardPET-03 Periotome 3
PET-04 Periotome 4 PEE-03 Periosteal Elevator Molt9
PEE-05 Periosteal Elevator SeldinPET-05 Periotome 5
BOC-01 Bone Curette CM2-4
KIF-01 Kirkland Knife 15k/16k
KIF-02 Gingivectomy Knife GF7
KIF-04 Gingivectomy Knife GF10
KIF-06 Buck 3/4
BOR-01
Double Action Bone Rongeur
KIF-03 Gingivectomy Knife GF9
KIF-05 Gingivectomy Knife GF11
KIF-07 Orban
BOC-02 Bone Curette CM8
BOC-03 Bone Curette CM9
EXP-01 Explorer D5W
EXP-03 Exprobe
EXP-02 Explorer 23
BOC-04 Bone Curette Curved 4
BOC-05 Bone Curette Curved 5
BOC-06 Bone Curette Curved 6
PEE-01 PEE-01 Periosteal Elevator Buser
Previously, specific curette was requried for a position of each tooth. But ‘The One Curette’ developed with the angle can be used to all kinds of teeth. Only one curette can be applied to every tooth. in particular, Its handle is beautiful and graceful by adapting the korean traditional lattice strip pattern.
GC10 3-4 Gracey Curette10 3-4 GC10 5-6 Gracey Curette10 5-6
GC10 7-8 Gracey Curette10 7-8 GC10 9-10 Gracey Curette10 9-10
GC10 11-12 Gracey Curette10 11-12 GC10 13-14 Gracey Curette10 13-14
HMS-01
Hemo10cm(Curved)
HMS-02
Hemo12cm(Curved)
HMS-03
Hemo12cm(Straight)
HMS-04
Hemo14cm(Curved)
BOR-03
Mini Bone Rongeur
EXP-04 Probe
MIR-HD2MIR-01+Ø6 Handle
MIR-HD2MIR-01+Ø10 Handle TWC-02
Towel Clamp 12cm
2014 MCT MR.CURETTE 27
Scaler
Needle Holder
Scissor
Excavator
SCA-01 Scaler H5/33
SCA-03 Scaler J30/33
SCA-05 Scaler J34/35
SCA-07 Scaler GF5
SCA-09 Scaler 15/30
SCA-02 Scaler H6/H7 EXC-01 Excavator 17
SCA-04 Scaler J31/32 EXC-03 Excavator 17S
EXC-02 Excavator 17L
EXC-05 Excavator 32L
EXC-06 Excavator 33L
SCA-06 Scaler OD1/33 EXC-04 Excavator 18
SCA-08 Scaler GF6 EXC-07 Excavator 63~64
SCA-10 Scaler 15/33
NTC-05 Castro Needle Holder T/C 14cm NTC-06 Castro Needle Holder T/C 18cm
EXC-08 Excavator 65~66
SNH-TC15
S-Curved Needle Holder T/C 15cm
SCI-01
Iris Scissor
SCI-02/03
Dean Scissor14/17cm
SCI-04
Golmanfox Scissor
SCI-05/06
La Grange Scissor 11/14cm
SCI-07/08
S-Curved Scissor 14/17cm
STC-01
Iris Scissor
STC-02/03
Dean Scissor 14cm/17cm
STC-04
Golmanfox Scissor T/C
STC-05
Castro Scissor T/C 14cm
NTC-01
Needle Holder T/C 12cm
NTC-02
Needle Holder T/C 14cm
NTC-03
Needle Holder T/C 16cm
NTC-04
Needle Holder T/C 18cm
DNH-TC14
Dental Needle Holder T/C 14cm
DNH-TC16
Dental Needle Holder T/C 16cm
NDH-01/02/03
Needle Holder 12/14/16cm
2014 MCT MR.CURETTE 28
Extraction Forcep / Root Forcep / Implant Forcep
Root Elevator / Root Picker
Retractor
RTR-ARA Anterior Retractor A
ANW-01 Angle Wider MGG-01 Mouth Gag 14cm RTR-MDS/MDL Middle Doof(S/L) RTR-LBDS/LBDM/LBDL Langenbeck Down(S/M/L) RTR-LBUS/LBUM/LBUL Langenbeck UP(S/M/L)
RTR-ARB Anterior Retractor B RTR-GL Goliath Retractor RTR-AN Army Navy RTR-MS MinesotaRTR-LP12/14/16 Loop Retractor(12/14/16cm)
EXF-P01
Palm Extraction Forcep(1)
RET-02
RET-12RET-01
RET-03
RET-13
RET-04
RET-14
RET-05
RET-15
RET-06
RET-16
RET-07
RET-17
RET-08
RET-18
RET-09 RET-10
RTP-02 RTP-01 RTP-03RET-11
EXF-L01
Lower Incisors(151A)
EXF-P02
Palm Extraction Forcep(5)
EXF-L02
Lower Premolars(13)
EXF-U01
Upper Incisors(150)
EXF-L03
Lower Third Molars(79)
EXF-U02
Upper Incisors(150)
EXF-L04
Lower Molars(17)
EXF-U03
Upper Third Molars(67A)
EXR-01
Root Forcep 1
EXF-U04
Upper Left Molars(53L)
EXR-02
Root Forcep 2
EXF-U05
Upper Right Molars(53R)
EXR-03
Root Forcep 3
IMF-01
Implant Forcep
EXR-04
Root Forcep(Straight)
2014 MCT MR.CURETTE 29
Top Related