Company Presentation Bode Belting GmbH
www.bodebelting.de
Your partner for conveyor and timing belts applications
Competent contact persons for customer specific solutions with over 40 years of industry knowledge.
Founded: 1969Location: Lauenburg/ Elbe (40km from Hamburg)Employees: 40Products: Timing belts and Conveyor beltsCustomers: Dealers and OEMMarkets served: Worldwide
Keywords with background
All products and services of Bode Belting GmbH are aimed at the following keywords:
Cost efficientSmart processes from order to delivery lead not only for us but also for you to higher profits.
FastnessOffer on the same day delivery within few days. Established processes in combination with fast-short changeover times to satisfy your customers.
Competent consultingAmong the specific challenges of the initial installation to detailed confection for machinery, we will help you individually, and solution-oriented.
Top-QualityWithout question, we have confidence in our quality. Nevertheless, we continiously check the core parameters and mechanicial performance of our products in our laboratory.
A brand of Bode Belting
ATLATOS® The Timing Belt
A brand of Bode Belting
The linear PU timing belt production
Five different equipped, side by side running production lines and a mobile extruder ensure short changeover times.
Production width 150 mm (450 mm) Material: PU (92° Shore A)
Carrier: Steel and Aramid
Flexible arranged cutting widthsStandard: 6 x 25, 9 x 16, 4 x 32, etc.
Metric Pitches: T5, T10, T20, AT5, AT10, AT20, HTD 5M, HTD 8M, HTD 14M, TK10, ATK10, Inch pitches: H, XH, L
Fabric: PAZ / PAR in green and black (antistatic)
A brand of Bode Belting
The Flex PU timing belt production (truly endless - no joint)
Our recently installed Flex production line offers a variety of different pitches and other parameters
Production width 150 mm
Length: min. 1.780 -max. 24.000 mmCarrier: Steel, stainless steel and Aramid
Material: PU (92° Shore A)
Metric Pitches: T10, T20, AT10, AT20 (more to follow soon)
A brand of Bode Belting
The fabrication.
Endless spiral joints
Mechanical processing
Coatings
V-guides Cleats
A brand of Bode Belting
Fingers are punched in the PU timing belts , which are then made endless by heat and pressure.
Welded finger joint connection
The fabrication.Jointing methods.
Mechanical joint
As with the welded joints, we first finger punch each end of the belt when applying a mechanical joint. Between these ends a plastic lacing is welded and also fingerpunched.
The lacing contains a mechanisme, which allows to disconnect the joint at any time. (see picture)
The fabrication.Coatings
The ATLATOS® timing belt can be coated for almost any application with different materials.
A brand of Bode Belting
10A brand of Bode Belting
The fabricationMechanical processing.
Grinding top surfaces
The coated surfaces can be grinded down to desired thicknesses. Next some applications require the coating to be roughened.
Longitudinal and transverse milling
Either in preparation to attach a V-guide rope or for special applications the ATLATOS® timing belt can be milled in both longitudinal as transverse directions.
11A brand of Bode Belting
The fabrication.V-guide ropes.
To track the ATLATOS® timing belt without using flanged pulleys, thermoplastic V-guide ropes are welded by hot air on the timing belt. Available are guide ropes of 6 till 17 mm width.
12A brand of Bode Belting
The fabrication.Cleats.
For conveying applications horizontal or vertical cleats are often welded on the ATLATOS® timing belt.
Thank you for your attention!Please also watch our video on website at
Bode Belting GmbHReeperbahn 3521481 Lauenburg
04153 55 09 5-004153 55 86 75 [email protected]
http://www.bodebelting.com/BodeBelting/Ueberuns/index.html
Top Related