Command: 3darray Select objects: 1 foundSelect objects: Enter the type of array [Rectangular/Polar] <R>:p Enter the number of items in the array: 3 Specify the angle to fill (+=ccw, -=cw) <360>: Rotate arrayed objects? [Yes/No] <Y>: Specify center point of array: 0,0 Specify second point on axis of rotation: 0,0,20 Command: hi HIDE Regenerating model.
Command: rotate3d Current positive angle: ANGDIR=counterclockwise ANGBASE=0Select objects: 1 foundSelect objects: Specify first point on axis or define axis by[Object/Last/View/Xaxis/Yaxis/Zaxis/2points]: y Specify a point on the Y axis <0,0,0>: Specify rotation angle or [Reference]: -150 Command: hi HIDE Regenerating model.
Command: mirror3d Select objects: 1 foundSelect objects: Specify first point of mirror plane (3 points) or[Object/Last/Zaxis/View/XY/YZ/ZX/3points] <3points>: zx Specify point on ZX plane <0,0,0>: Delete source objects? [Yes/No] <N>: Command: hi HIDE Regenerating model.
Command: -vports Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] <3>: 4 Regenerating model.
Command: -vports Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] <3>: SI Regenerating model.
Command: -vports Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] <3>: 3 Enter a configuration option [Horizontal/Vertical/Above/Below/Left/Right] <Right>: H Regenerating model.
Command: -vports Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] <3>: 3 Enter a configuration option [Horizontal/Vertical/Above/Below/Left/Right] <Right>: V Regenerating model.
Command: -vports Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] <3>: 3 Enter a configuration option [Horizontal/Vertical/Above/Below/Left/Right] <Right>: A Regenerating model.
Command: -vports Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] <3>: 3 Enter a configuration option [Horizontal/Vertical/Above/Below/Left/Right] <Right>: B Regenerating model.
Command: -vports Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] <3>: 3 Enter a configuration option [Horizontal/Vertical/Above/Below/Left/Right] <Right>: L Regenerating model.
Command: -vports Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] <3>: 3 Enter a configuration option [Horizontal/Vertical/Above/Below/Left/Right] <Right>: R Regenerating model.
Command: -vports Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] <3>: 2 Enter a configuration option [Horizontal/Vertical] <Vertical>: Regenerating model.
Command: -vports Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] <3>: 2 Enter a configuration option [Horizontal/Vertical] <Vertical>: H Regenerating model.
Command: limits Reset Model space limits:
Specify lower left corner or [ON/OFF] <0.0000,0.0000>: Specify upper right corner <420.0000,297.0000>: 120,80
Command: m MOVE
Select objects: 1 found
Select objects: Specify base point or displacement: 40,40 Specify second point of displacement or <use first point as displacement>: 40,80
Command: ti TILEMODEEnter new value for TILEMODE <1>: 0 Regenerating layout.Command: limits Reset Paper space limits:Specify lower left corner or [ON/OFF] <0.0000,0.0000>: Specify upper right corner <420.0000,297.0000>: 210,297 Command: Z ZOOMSpecify corner of window, enter a scale factor (nX or nXP), or[All/Center/Dynamic/Extents/Previous/Scale/Window] <real time>: A Regenerating layout.Command: mview Specify corner of viewport or [ON/OFF/Fit/Hideplot/Lock/Object/Polygonal/Restore/2/3/4] <Fit>: R Enter viewport configuration name or [?] <*Active>: Specify first corner or [Fit] <Fit>: 20,10 Specify opposite corner: 200,287 Regenerating model.
Command: mspace Command: vplayer Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]: N Enter name(s) of new layers frozen in all viewports: corp,sectiune,hasuri,axe-princ,axe-sus,axe-st Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]:
Command: ti TILEMODEEnter new value for TILEMODE <0>: 1 Regenerating model.Command: -vports Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] <3>: SI Regenerating model.
Command: change Select objects: 40,0 1 foundSelect objects: Specify change point or [Properties]: P Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]: LA Enter new layer name <0>: corp Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]:
Command: section Select objects: 40,40 1 foundSelect objects: Specify first point on Section plane by [Object/Zaxis/View/XY/YZ/ZX/3points] <3points>: ZX Specify a point on the ZX-plane <0,0,0>: 0,60 Command: -layer Current layer: "0"
Enter an option
[?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: OFF Enter name list of layer(s) to turn off: corp Enter an option
[?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]:
Command: ucs Current ucs name: *WORLD*
Enter an option [New/Move/orthoGraphic/Prev/Restore/Save/Del/Apply/?/World] <World>: N Specify origin of new UCS or [ZAxis/3point/OBject/Face/View/X/Y/Z] <0,0,0>: OB Select object to align UCS: 0,60
Command: change Select objects: 0,0 1 found
Select objects:
Specify change point or [Properties]: P Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]: LA Enter new layer name <0>: sectiune Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]:
Command: -layer Current layer: "0"
Enter an option
[?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: LW Enter lineweight (0.0mm - 2.11mm): 0.8 Enter name list of layers(s) for lineweight 0.80mm <0>: sectiune Enter an option
[?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: SEnter layer name to make current <0>: sectiune Enter an option
[?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]:
Command: -layer Current layer: "sectiune"
Enter an option
[?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: S Enter layer name to make current <sectiune>: hasuri Enter an option
[?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]:
Command: -bhatch Current hatch pattern: ANGLE
Specify internal point or [Properties/Select/Remove islands/Advanced]: P Enter a pattern name or [?/Solid/User defined] <ANGLE>: ansi31 Specify a scale for the pattern <1.0000>: 0.5 Specify an angle for the pattern <0>: Current hatch pattern: ANSI31
Specify internal point or [Properties/Select/Remove islands/Advanced]: 4,3 Analyzing internal islands...
Current hatch pattern: ANSI31
Specify internal point or [Properties/Select/Remove islands/Advanced]: 8,25 Analyzing internal islands...
Current hatch pattern: ANSI31
Specify internal point or [Properties/Select/Remove islands/Advanced]: 6,55 Analyzing internal islands...
Current hatch pattern: ANSI31
Specify internal point or [Properties/Select/Remove islands/Advanced]: 5,76 Analyzing internal islands...
Current hatch pattern: ANSI31
Specify internal point or [Properties/Select/Remove islands/Advanced]:
Command: -layer Current layer: "hasuri"
Enter an option
[?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: S Enter layer name to make current <hasuri>: axe-princ Enter an option
[?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]:
Command: ti TILEMODE
Enter new value for TILEMODE <1>: 0 Regenerating layout.
Regenerating model.
Command: -layer Current layer: "axe-princ"
Enter an option
[?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: S Enter layer name to make current <axe-princ>: 0 Enter an option
[?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: Command: vplayer Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]: T Enter layer name(s) to thaw: sectiune,hasuri,axe-princ Enter an option [All/Select/Current] <Current>: Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]: Regenerating layout.
Regenerating model.
Command: vpoint Current view direction: VIEWDIR=-1.2000,-1.0000,1.0000
Specify a view point or [Rotate] <display compass and tripod>: 0,-1,0 Regenerating model.
Grid too dense to display
Command: z ZOOM
Specify corner of window, enter a scale factor (nX or nXP), or
[All/Center/Dynamic/Extents/Previous/Scale/Window] <real time>: S Enter a scale factor (nX or nXP): 1XP Grid too dense to display
Command: vplayer Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]: T Enter layer name(s) to thaw: corp Enter an option [All/Select/Current] <Current>:
Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]: Regenerating layout.
Regenerating model.
Grid too dense to displayCommand: vpoint Current view direction: VIEWDIR=-1.2000,-1.0000,1.0000
Specify a view point or [Rotate] <display compass and tripod>: 0,0,1 Regenerating model.
Command: _solprof Select objects: 40,40 1 found
Select objects: Display hidden profile lines on separate layer? [Yes/No] <Y>: Project profile lines onto a plane? [Yes/No] <Y>: Delete tangential edges? [Yes/No] <Y>: One solid selected.Command: vplayer Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]: F Enter layer name(s) to freeze: corp Enter an option [All/Select/Current] <Current>:
Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]: Command: vpoint Current view direction: VIEWDIR=0.0000,0.0000,1.0000
Specify a view point or [Rotate] <display compass and tripod>: -1,-1,1 Regenerating model.
Command: Grid too dense to display
vplayer
Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]: T Enter layer name(s) to thaw: corp Enter an option [All/Select/Current] <Current>:
Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]: Regenerating layout.
Regenerating model.
Grid too dense to display
Command: vpoint Current view direction: VIEWDIR=-1.2000,-1.0000,1.0000 Specify a view point or [Rotate] <display compass and tripod>: -1,0,0 Regenerating model.
Grid too dense to display
Grid too dense to display
Command: _solprof Select objects: 40,40 1 found
Select objects: Display hidden profile lines on separate layer? [Yes/No] <Y>: Project profile lines onto a plane? [Yes/No] <Y>: Delete tangential edges? [Yes/No] <Y>: One solid selected.
Command: vplayer Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]: F Enter layer name(s) to freeze: corp Enter an option [All/Select/Current] <Current>: Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]:
Command: -layer Current layer: "0"
Enter an option
[?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: ? Enter layer name(s) to list <*>: Layer name State Color Linetype Lineweight
------------------ ----------- ------------- ------------ ------------
"0" on -P 7 (white) "Continuous" Default
"axe" on -P 7 (white) "CENTER2" Default
"axe-princ" on -P 7 (white) "CENTER2" Default
"axe-st" on -P 7 (white) "CENTER2" Default
"axe-sus" on -P 7 (white) "CENTER2" Default
"corp" on -P 7 (white) "Continuous" Default
"cote" on -P 7 (white) "Continuous" Default
"Defpoints" on 7 (white) "Continuous" Default
"f-inv" on -P 7 (white) "DASHED2" 0.350 mm.
"f-viz" on -P 7 (white) "Continuous" 0.500 mm.
"hasuri" on -P 7 (white) "Continuous" Default
"l-s-viz" on -P 7 (white) "Continuous" Default
"PH-36E" on -P 7 (white) "Continuous" Default
"PH-370" on -P 7 (white) "Continuous" Default
"PV-36E" on -P 7 (white) "Continuous" Default
"PV-370" on -P 7 (white) "Continuous" Default
"sectiune" on -P 7 (white) "Continuous" 0.800 mm.
Current layer: "0"
Enter an option
[?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: LW Enter lineweight (0.0mm - 2.11mm): 0.8 Enter name list of layers(s) for lineweight 0.80mm <0>: PV-36E,PV-370 Enter an option
[?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: L Enter loaded linetype name or [?] <Continuous>: dashed2 Enter name list of layer(s) for linetype "dashed2" <0>: PH-36E,PH-370 Enter an option
[?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: Regenerating layout.
Regenerating model.
Grid too dense to display
Command: pspace
Command: -layer Current layer: "0"
Enter an option
[?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: N Enter name list for new layer(s): fer Enter an option
[?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: C Enter color name or number (1-255): blue Enter name list of layer(s) for color 5 (blue) <0>: fer Enter an option
[?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]:
Command: change
Select objects: 70,287
1 found
Select objects: 140,287
1 found, 2 total
Select objects: 70,10
1 found, 3 total
Select objects: 140,10
1 found, 4 total
Select objects:
Specify change point or [Properties]: p
Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]: la
Enter new layer name <0>: fer
Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]:
Command: change Select objects: 70,287 1 found
Select objects: 140,287 1 found, 2 total
Select objects: 70,10 1 found, 3 total
Select objects: 140,10 1 found, 4 total
Select objects: Specify change point or [Properties]: P Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]: LA Enter new layer name <0>: fer Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]:
Command: stretch Select objects to stretch by crossing-window or crossing-polygon...
Select objects: c Specify first corner: 0,20 Specify opposite corner: 210,0 2 found
Select objects: Specify base point or displacement: 0,0 Specify second point of displacement: 0,30
Command: e ERASE
Select objects: 140,40 1 found
Select objects:
Command: m MOVE
Select objects: 70,40 1 found
Select objects: Specify base point or displacement: 0,0 Specify second point of displacement or <use first point as displacement>: 0,-10
Command: stretch Select objects to stretch by crossing-window
or crossing-polygon...
Select objects: c Specify first corner: 0,143 Specify opposite corner: 125,115 1 found
Select objects: Specify base point or displacement:
0,145 Specify second point of displacement:
0,115
Command: stretch Select objects to stretch by crossing-window or crossing-polygon...
Select objects: c Specify first corner: 0,297 Specify opposite corner: 210,260 2 found
Select objects: Specify base point or displacement: 0,297 Specify second point of displacement: 0,267
Command: stretch
Select objects to stretch by crossing-window or crossing-polygon...
Select objects: c
Specify first corner: 0,180
Specify opposite corner: 210,130
2 found
Select objects:
Specify base point or displacement: 0,0
Specify second point of displacement: 0,30
Command: m MOVE
Select objects: W Specify first corner: 0,270 Specify opposite corner: 210,160 3 found
Select objects: Specify base point or displacement: 0,270 Specify second point of displacement or <use first point as displacement>: 0,250 Command: MOVE
Select objects: 20,50 1 found
Select objects: Specify base point or displacement: 0,50 Specify second point of displacement or <use first point as displacement>: 0,70
Command: -layer Current layer: "0"
Enter an option
[?/Make/Set/New/ON/OFF/Color/Ltype/
LWeight/Plot/Freeze/Thaw/LOck/Unlock]: OFF Enter name list of layer(s) to turn off: fer Enter an option
[?/Make/Set/New/ON/OFF/Color/Ltype/
LWeight/Plot/Freeze/Thaw/LOck/Unlock]:
Command: m MOVE
Select objects: c Specify first corner: 55,30 Specify opposite corner: 180,220 2 found
Select objects: Specify base point or displacement: 0,0 Specify second point of displacement or
<use first point as displacement>: 10,0
Command: -layer Current layer: "0"
Enter an option
[?/Make/Set/New/ON/OFF/Color/Ltype/
LWeight/Plot/Freeze/Thaw/LOck/Unlock]:
OFF Enter name list of layer(s) to turn off:
hasuri,fer Enter an option
[?/Make/Set/New/ON/OFF/Color/Ltype/
LWeight/Plot/Freeze/Thaw/LOck/Unlock]:
Command: l LINE Specify first point: 40,130 Specify next point or [Undo]: @5,0 Specify next point or [Undo]: Command: change Select objects: 42,130 1 found
Select objects: Specify change point or [Properties]: P Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]: LW Enter new lineweight <ByLayer>: 1 Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]: Command: _leader Specify leader start point: 42.5,130 Specify next point: @0,-7 Specify next point or [Annotation/Format/Undo] <Annotation>: Enter first line of annotation text or <options>: Enter an annotation option [Tolerance/Copy/Block/None/Mtext] <Mtext>: N
Command: explode Select objects: c Specify first corner: 35,128 Specify opposite corner: 50,120 1 found
Select objects: Command: scale
Select objects: c
Specify first corner: 35,128
Specify opposite corner: 50,120
2 found
Select objects:
Specify base point: 42.5,130
Specify scale factor or [Reference]: 1.5
Command: -block Enter block name or [?]: estsh Specify insertion base point: 45,130 Select objects: W Specify first corner: 35,132 Specify opposite corner: 50,120 3 found
Select objects: Command: ucs Current ucs name: *WORLD*
Enter an option [New/Move/orthoGraphic/Prev/Restore/Save/Del/Apply/?/World]
<World>: N Specify origin of new UCS or [ZAxis/3point/OBject/Face/View/X/Y/Z] <0,0,0>:
42.5,130 Grid too dense to display
Grid too dense to display
Command: ucsicon Enter an option [ON/OFF/All/Noorigin/ORigin] <ON>: OR
Command: -attdef Current attribute modes: Invisible=N Constant=N Verify=N Preset=N
Enter an option to change [Invisible/Constant/Verify/Preset] <done>: Enter attribute tag name: ts Enter attribute prompt: Majuscula Enter default attribute value: A Current text style: "a508" Text height: 5.0000
Specify start point of text or [Justify/Style]: -8,-8 Specify rotation angle of text <0>: Command: -block Enter block name or [?]: esh Specify insertion base point: 2.5,0 Select objects: w Specify first corner: -10,10 Specify opposite corner: 10,-15 4 found
Select objects:
Command: -insert Enter block name or [?] <estsh>: esh Specify insertion point or [Scale/X/Y/Z/Rotate/PScale/PX/PY/PZ/PRotate]: Enter X scale factor, specify opposite corner, or [Corner/XYZ] <1>: Enter Y scale factor <use X scale factor>: Specify rotation angle <0>: Enter attribute values
Majuscula <A>: A
Command: -insert Enter block name or [?] <esh>: rug Specify insertion point or [Scale/X/Y/Z/Rotate/PScale/PX/PY/PZ/PRotate]: _nea to
Enter X scale factor, specify opposite corner, or [Corner/XYZ] <1>: Enter Y scale factor <use X scale factor>: Specify rotation angle <0>:
Command: -insert Enter block name or [?] <rug>: Specify insertion point or [Scale/X/Y/Z/Rotate/PScale/PX/PY/PZ/PRotate]: nea to
Enter X scale factor, specify opposite corner, or [Corner/XYZ] <1>: Enter Y scale factor <use X scale factor>: Specify rotation angle <0>: 90 Enter attribute values
Rugozitatea <Ra>: Ra3,2
Command: -insert Enter block name or [?] <rug>: Specify insertion point or [Scale/X/Y/Z/Rotate/PScale/PX/PY/PZ/PRotate]: nea to
Enter X scale factor, specify opposite corner, or [Corner/XYZ] <1>: Enter Y scale factor <use X scale factor>: Specify rotation angle <0>: 180 Enter attribute values
Rugozitatea <Ra>: Ra12,5
Command: -attedit Edit attributes one at a time? [Yes/No] <Y>: Enter block name specification <*>: Enter attribute tag specification <*>: Enter attribute value specification <*>: Select Attributes: 1 found
Select Attributes: �1 attributes selected.
Enter an option [Value/Position/Height/
Angle/Style/Layer/Color/Next] <N>: A Specify new rotation angle <180>: 0 Enter an option [Value/Position/Height/
Angle/Style/Layer/Color/Next] <N>: P Specify new text insertion point
<no change>: @-10,-5 Enter an option [Value/Position/Height/
Angle/Style/Layer/Color/Next] <N>:
Top Related