February 23-27, 2020 • San Diego, California, USA

Abstract Deadline is July 1, 2019. Submit online at www.programmaster.org/TMS2020.

SUBMIT AN ABSTRACT BY JULY 1

Submit an abstract to:

Questions? Contact programming@tms.org

Corrosion

Coatings and Surface Engineering for Environmental Protection II This symposium will cover the following topics:

• Evaluation of corrosion performance• Variations in test results between cabinet testing vs out-door testing• Development of corrosion inhibiting coatings• Fundamental understanding of corrosion mechanism• Analytical tools used to characterize corrosion mechanisms • Challenges to control corrosion under insulation

ORGANIZERSArif Mubarok, PPG Coatings Innovation Center, USA Raul Rebak, GE Global Research, USARajeev Gupta, The University of Akron, USATushar Borkar, Cleveland State University, USA Brian Okerberg, PPG Coatings Innovation Center, USAMichael Mayo, PPG Coatings Innovation Center, USA

SYMPOSIUM SPONSORSTMS Materials Processing & Manufacturing DivisionTMS Structural Materials Division TMS Corrosion and Environmental Effects Committee