Frame of Reference
Whether or not you are moving depends on your point-of-view.
From inside the box car, the woman in red is stationary (at rest).
From outside the box car, the woman in red is moving.
So what is it? Is she moving? Is she stationary?
Frame of Reference
Here’s a “thought experiment”
26 m/s20 m/s
Two trains travel on parallel tracks past a platform.
A B
If you are standing on the platform, how fast does each travel?
If you are on train A, how fast is train B travelling?
If you are on train A, how fast are the other passengers on train A moving relative to YOU?
Frame of Reference
General Rule:
Any measurement of position, distance, or speed must be made with respect to a reference frame.
Unless otherwise stated,the earth will be used as the reference frame.
Distance / Displacement
Distance: how far you travelled in total.
Displacement: the change in distance.
Distance is the total length (measured in meters) of travel along a path.
Displacement is the change in position (measured in meters). It depends on the starting and ending points – not the path of travel.
Distance / Displacement
Example: You walk 4 blocks North.
What is your distance? What is your displacement?
Example: You walk 4 blocks North then 7 blocks South.
What is your distance? What is your displacement?
Example: You walk 4 blocks North, then 7 blocks South, then
3 blocks North.
What is your distance? What is your displacement?
Displacement
X2X1
Displacement = ∆X = X2 – X1
Final position Initial position
Displacement ONLY depends on the end points, NOT the path taken!
Direction
• Distance does NOT have a direction.
• Displacement DOES have direction.
On a number line (or a coordinate system) you can have positive or negative displacement
x
y
Coordinate Plane
Remember this :
Scalars & Vectors
• If a quantity has only a numerical value, it is a SCALAR.
(it has magnitude)
If a quantity has both a numerical value AND a direction associated with it, it is a VECTOR.
(it has magnitude and direction)
Distance
Displacement
How fast are you going?
Speed is the distance traveled per time spent to travel. It is a Scalar whose units are m/s.
S = d / t
Instantaneous Speed – Instantaneous speed is the speed at a particular moment in time.
Savg = Δd / Δt
Average Speed – Average speed is the total distance traveled divided by the total time it took to travel. It is the average speed of travel.
Distance (a Scalar)
Distance (a Scalar)
And WHERE are you going?
Velocity is the change in position (displacement) per time spent to travel. It is a Vector whose units are m/s.
V = ∆d / ∆t
Velocity is a vector that is based on displacement, so you can change your velocity by changing your speed
OR by changing your direction.
The units for velocity are m/s
Displacement (a Vector)
Plotting Position vs. Time
The basic motion plot we will study in Physics is:
Position (or Displacement) vs Time
It looks like this:
Time (s)
Pos
ition
(m
)
The slope of a Position vs. Time plot
will give you the VELOCITY
(X2,Y2)
(X1,Y1)
Calculating Velocity from a Position vs. Time Graph
Time (s)
Pos
ition
(m
)
Straight line = constant velocityPositive slope = going away from you
Time (s)
Pos
ition
(m
)
Straight line = constant velocityNegative slope = coming back toward you
Remember: Velocity = Speed & Direction. = a Vector
In Physics, the use of a negative sign shows directionSlope tutorial
Calculating Velocity from a Position vs. Time Graph
For objects moving with constant speed, the slope of the plot can tell you much information:
Time (s)
Pos
ition
(m
)
Time (s)
Pos
ition
(m
)
Time (s)
Pos
ition
(m
)
Time (s)
Pos
ition
(m
)
Straight line = constant velocityMedium slope = medium velocity
Straight line = constant velocityLow slope = low velocity
Straight line = constant velocityHigh slope = high velocity
Straight line = constant velocityNo slope = no velocity (at rest)
Velocity animation
Time (s)
Pos
ition
(m
)
What do you think it means when . . .
Negative Position AND Negative slope
Behind you and going away from you.
In front of you and coming at you.
Behind you and going away from you.YOU
Think of this axis as Your position
Question:
Answer:
If the plot gives a linear graph, this tells you the object travelled with constant speed. If the plot gives a non-linear graph, then the speed is changing.
Time (s)
Pos
ition
(m
)
Constant speed (LINEAR GRAPH) (the slope is constant)
Increasing speed (POWER GRAPH) (the slope keeps increasing)
1. When graphically analyzing the motion of an object, start with a position vs. time graph and see what type of motion it is. Look at the slope to gain more detailed info.
2. Next step: do a velocity vs. time graph. The slope of such a graph will give you the ACCELERATION of the object.
Acceleration
- how much the velocity changes in a specified time interval.
Time (s)
Vel
ocity
(m
/s)
0 3 6 9 12 15
30
25
20
15
10
5
0
Describe what is happening to the object.
What is happening in section A?
What is happening in section B?
What is happening in section C?
A
B
C
Acceleration is the slope of the graph (on a Velocity vs. Time Graph)
Don’t confuse this with:
Velocity is the slope of the graph (on a Position vs. Time Graph)
9/19/11
Time (s)
Vel
ocity
(m
/s)
0 3 6 9 12 15
30
25
20
15
10
5
0
A
B
C
A: Object has increasing velocity (speeding up)Object has constant acceleration (straight line slope)a = (30-0)/(9-0) = 3.33 m/s2
B: Object is travelling with constant velocity.Object has no acceleration (no slope)a = (30-30)/(12-6) = 0.00 m/s2
C: Object has decreasing velocity (slowing down)Object has constant acceleration (deceleration)a = (0-30)/(15-12) = -10 m/s2
Answers
One last thing . . . .
When looking at Velocity vs. Time Graphs, if you want to calculate the object’s displacement (change in position), calculate the area under the graph. For example:
Time (s)
Vel
ocity
(m
/s)
The area under the line will give you the object’s displacement in the time interval specified.
Displacement = area under line
Displacement = ∆v * ∆t
∆t
∆v
Displacement tutorial
Acceleration
Acceleration is a VECTOR – it has magnitude and direction
Acceleration is the slope of a Velocity vs. Time graph.
Acceleration is the change of velocity in a specified time interval.
a = ∆v / ∆t where: ∆v = vfinal – vinitial
∆t = tfinal – tinitial
The symbol for Acceleration is: a
The units for Acceleration are: m/s2
OK, let’s talk a little more about acceleration . . .
• We already know that acceleration is how fast your velocity changes.
acceleration is the rate of change of velocity.
acceleration is the slope of the graph on a time vs. velocity graph
Let's see how velocity and acceleration at related for objects in motion:
1. If the object is moving away, it has positive velocity.
2. If the object is moving at you, it has negative velocity.
3. If the object is speeding up, it has positive acceleration.
4. If he object is slowing down it has negative acceleration.
What would be happening if an object has positive velocity and positive acceleration?
What would be happening if an object has negative velocity and positive acceleration?
What would happen if an object has positive velocity and negative acceleration?
What would happen if an object has negative velocity and negative acceleration?
moving away from you and increasing speed
moving at from you and increasing speed
moving away from you and decreasing speed
moving at from you and decreasing speed
We know that in our lives, a lot of forces can cause objects to accelerate or decelerate (negative
acceleration)
In the lab, you rolled a cart down an inclined plane and saw that it accelerated due to gravity. You calculated its acceleration from the plot of a time vs. velocity graph.
As the angle of inclination of the plane increases, the cart will experience greater and greater acceleration. (it
speeds up faster – the rate of change of velocity)
The greatest value of acceleration that an object can have without outside forces on it is 9.81 m/s2. This is the value that gravity will accelerate objects when they fall on
their own in a vacuum.
This is called: free fall
Free Fall
Galileo dropped two balls of different mass from the Leaning Tower of Pisa and found that both landed at the same time.
He proved that gravity accelerates all objects to the ground at the same rate.
Based on his calculations, when all objects fall freely, they accelerate at 9.81 m/s2 or about 32 ft/s2. (neglecting air resistance)
This means that for every second that an object falls freely, its velocity increases by 9.81 m/s.
time
position
time
velocity
Slope of line = a = 9.81 m/s2
Increasing velocityLinear graph = constant accelerationPower graph =
Here are the graphical representations of an object in freefall:
Freefall can also be considered to be when you throw an object straight up into the air.
Think about this: If you drop a ball, it starts out with zero velocity (at rest) and
has velocity at the end of its travel.
If you throw a ball up into the air, it starts out with velocity you give it and has zero velocity at the end of its travel.
They are the same, just opposite directions !!!!!
Analyzing Motion via Equations (solving Physics problems)
So far, we have solved motion problems by graphical means.
For example: solve the following problem:
A car travels 24m in 3s. What is its velocity?
You would have plotted this out on a time vs. position graph and found the slope of the line.
Time (s)
Po
sitio
n (
m)
24
3
slope = ∆y = (24-0) = 8m/s ∆x (3-0)
Now let’s solve it with equations we know . . . How about v = ∆x ∆ t
So, solve the following problem:
A car travels 24m in 3s. What is its velocity?
Use the GUESS Method . . .
G write your givens.
U write your unknown(s).
E write the equation you will use.
S substitute the given values into the equation.
S solve the equation (using correct units!)
(and I HIGHLY recommend drawing it also!)
given:∆x = 24m∆t = 3sv = ?
v = ∆x / ∆t
v = 24m / 3s
V = 8m/s
Analyzing Freefall via Equations (solving Physics problems)
OK, we now know that when we drop an object, it will increase its velocity as it falls.
Let’s try this freefall problem:
A ball is dropped off a cliff. It falls for 4s and accelerates at 9.81 m/s2. How fast is it going?
Now let’s take that information and apply it to find out more about it’s fall . . . How far did it travel?
Make sure you use GUESS !!!!!!
Kinematic Equations
Equations we already know:
Speed VelocityAcceleration
S = d / t v = ∆d / ∆ta = ∆v / ∆t
and: ∆v = vfinal – vinitial ∆t = tfinal – tinitial vavg = (vfinal + vinitial)
2
When we talk about objects moving with constant acceleration,
We can introduce three major equations: The Kinematic Equations.
How to solve motion problems using the Kinematic Equations
1. Read the problem.
2. Draw the problem.
3. GUESS the problem.
4. When you get to E – writing the Equation, determine which equation is a “best – fit” given the information you have and what unknown you are looking to find.
Notice that 2 of the Kinematic equations involve time and 2 involve displacement.
Let’s try a couple problems:
1. An elephant is dropped off a tall building. It falls for 7s. How fast is it going when it hits the ground below?
2. A mouse is also dropped off a tall building. It falls for 7s also. How tall is the building?
3. Based on what you know, which animal was dropped off the building first? WHY?
4. Physics Man (the ULTIMATE SUPERHERO) takes off to rescue a runaway speeding train by using the Laws of Physics. The train is 50m away and he only has 4s before the train will crash. How fast must he accelerate to save the train and all the people?
Top Related