«
RDW Vehicle Technology Division
THE NETHERLANDS
(NEDERLAND)
@)COMMUNlCATION
Conceming (I):
- approval granted- approval extended
approval refusedapproyal 'NithdravlflproEiHetiofldcfinltcly diseoatimled
of a type of mechanical coupling device or component pursuant to Regulation number 55.
Approval n"mber: E4-55R-010035 Extension n"mber: 01
Approval mark:E4 55R-Ol 0035
2.
3.
4.
5.
6.
7.
1. Trade name or mark ofthe device orcomponent : STEELPRESS
Manufacturer' s name for the type ofdevice or component : BC-800
Manufacturer' s name and address : STEELPRESS Sp. z 0.0.u1.PowstancowWielkopolskich 48PL-62-031 Lubon - Poman
If applicable, name and address ofthemanufacturer's representative
Altemative supplier' s name or trademarks applied to the device orcomponent
Name and address of company or bodytaking responsibility for the conformityofproduction : STEELPRESS Sp. z 0.0.
u1.PowstancowWielkopolskich 48PL-62-031 Lubon - Poman
Submitted for approval on~
P.o. Box 777
2700 AT ZoetermeerThe Netherlands
Vehicle Approval and InformationTel. + 31 (0)7934581 43
Fax + 31 (0)79345 8043www.rdw.nl
Coupling-comp01wnt R55-01 v5.00 Page l oj3
Approval number: E4-55R-010035 Extension number: 01
8. Technica1 service responsib1e forcondueting approva1 tests : DEKRA Automobil GmbH
Automobil Test Center
Senftenberger StraBe30D-O1998 Klettwitz
.
9. Brief description
9.1. Type and class of device or component : Coup1inghead, C1assB50-X
9.2. Characteristic va1ues
Vehicle manufacturer's maximumpermissib1evehicle mass : 000 kg
Distribution of maximum permissib1evehicle mass between the ax1es
Vehicle manufacturer' s maximum
permissib1e towab1e trailer mass : ... kg
Vehicle manufacturer's maximumpermissib1estatic mass on coup1ingball : 000 kg
Maximum mass of the vehicle, withbodywork, in running order, includingco01ant,oils, fue1,to01sand sparewhee1(if supplied) but not includingdriver : ... kg
Loading condition under which thetow ball height of a mechanica1coup1ingdevice fitted to category MIvehicles is to be measured - seeparagraph 2 of annex 7, appendix I: : not applicab1e
10. Instructions for the attachment of the coup1ingdevice or component type to the vehicle andphotographs or drawings of the mounting points given by the vehicle manufacturer:see instructions for attachment and use
...
Coupling-component R55-01 v5.00 Page 2 of3
9.2.1. Primary va1ues:
I
D
I
U
I
De
I
V
I
S(kN) (tonnes) (kN) (kN) (kg)7,7 - - - 75
Alternative va1ues:
I
D
I
U
I
De
I
V
I
S(kN) (tonnes) (kN) (kN) (kg)
- -
9.3. For classA mechanica1couplingdevicesor components,includingtowingbrackets:
Approval number: E4-55R-010035
11.
'"
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
Extension number: 01
Infonnation on the fitting of any specia1reinforcing brackets or p1atesor spacingcomponents necessary for the attachment of the coup1ingdevice or component:not applicab1e
Additiona1infonnation where the use of the coupling device or component is restricted tospecial types ofvehicles - see annex 5, paragraph 3.4.:not applicable
For Class K hook type couplings, details ofthe drawbar eyes suitable for use with theparticular hook type:not applicable.
Date of test report
Number of test report
Approval rn.arkposition
Reason( s) for extension of approval
Approval
Place
Date
Signature
: 29-5-2007
: 200411338 Extension 01
. on housing
. constructive modifications
. granted/extended/refused/withdrawn (1)
The list of documents deposited with the Administration Service which has grantedapproval is annexed to this communication and may be obtained on request.
- Test report as mentioned in item 15-Instruction for attachment and use- Drawings
(1) Strike out what does not apply.
Coupling-componen~ R55-01 v5.00
;
Page3 oj 3
Top Related