1
Catalogue
Introduction………………………………………………………………………2
Attention……………………………………………………………………………2
Functions…………………………………………………………………………..3
Parts…………………………………………………………………………………..3
Main machine…………………………………………………………………………3
Remote control………………………………………………………………………..4
Installment Instruction…………………………………………………… 4
Packing list……………………………………………………………………………..4
Assembling………………………………………………………………………….5-8
Use Instruction…………………………………………………………………8
The operation of higher and lower………………………………………………9
Remote control mode…………………………………………………………….9-20
Panel control…………………………………………………………………………20
Maintenance………………………………………………………………………21
Normal phenomenon………………………………………………………………… 21
Trouble examination…………………………………………………………………..22
Maintenance……………………………………………………………………………22
2
Introduction
Dear customer:
Please read this manual carefully before using the machine.
Only when you are familiar with the machine and you understand the correct usage can you
use the machine on the badminton court. Avoid misoperation which could result in
damaging the shuttlecock shooter or other accidents.
Attention:
Because the machines are regularly improved, in the manual some changes are
explained. Sometimes the latest changes are not mentioned in the manual, we
apologize that there is no notice for these changes then.
Warning▲
Do not allow the minors to play with the machine.
Do not stand in front of the machine during working status to prevent people from
getting hurt.
Attention:
Please observe the following items strictly.
Warning signal▲
The next items of the manual with warning signal should be abided strictly, otherwise
there will be danger of the personal safety or could lead to a significant accident.
Forbidding signal●
The next items of the manual with forbidden signal should be abided strictly, otherwise
there will be danger of the personal safety or could lead to damage of the machine.
▲Do not disassemble or change the machine voluntarily.
▲Do not break or move the power equipment of the machine
▲Do not let the children or the minors play with the machine or power equipment.
▲Do not control the power or machine switch with barefoot or wet hands.
▲Do not use the machine in the rainy and stormy weather.
▲Do not use the machine close to volatile or flammable gas.
▲This machine sets the time delay function: 5 seconds after starting the machine
can serve ball automatically, any time do not stretch out your face in front of the
ball window to look at, otherwise it can result in a personal accident.
▲Do not touch the inner parts of the machine during working .
▲If the machine has an unusual situation, for example: big noise, strong smog and
leakage, please immediately cut the power, then contact with local service provider
or manufacturer.
▲When cleaning up interior of the machine, do not let the minors operate the
machine, in order to avoid damaging the machine or causing any danger.
●No moving during working.
●No operating when the state of the battery is insufficient when in the direct-current
power supply condition.
●Don’t put other objects than badminton balls onto or into the shuttlecock shooter.
3
●No laying aside in moist or other bad environment.
●No cleaning the surface of the machine with volatile wet cloth.
Warning▲
The products are the professional sports-goods equipment. We are not
responsible for any legal responsibility if any other people change the products for
other purpose and cause damage.
Functions
YS-8000 The latest research,patented product,intelligent remote control
1. Remote control and panel control, AC 110V/220V power system.
2. Automatic elevation adjustment.
3. 11 functions with Remote control: fixed,horizontal serving,vertical serving,punching
shot,parallel drive,smash,front netting,base lobing,full base lifting,forehand and backhand
wide and narrow-line,any points(1-20) can be stored and canceled repeatedly.
4. Ball speed range: 30-120 km / h, frequency range : 2-10 seconds.
5. Remote automatic lifting system, utmost height: 2.3 meters.
6. Ball capacity :150.
Warning▲
Do not allow minors to play with the machine.Do not stand in front of the machine
during working status to prevent people from getting hurt.
Parts
Main machine:
Li f t i mg power swi t chAC
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
OFF DC AC
DC lamp
DC socket DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
protector
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
OFF DC AC
DC lamp
DC socket DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
stock
30
10
Spin
120120
Random
Vertical
Lob ball
Horizontal
speed (K/H)
frequency
( Second)
Top spin
Back spin
Wide
Among
Narrow
Horizontal
/OFFON
Vertical
speed frequency
Horizontal
W/A/N
Pattern
Reset
AC socket
protector
Socket
Li f t i ng col umn
DC PowerInt er f ace
Over - cur r ency prot ect or
AC/DC choosi ng swi t ch
LCD show wi ndow
Power l i ght
Bal l bucket
panel cont rol
Bal l bucket
shoot i ng wi ndow Li f t i ng col umn
Mai n machi neshoot i ng wi ndow
天线
REMOTE
stock
30
10
Spin
120120
Random
Vertical
Lob ball
Horizontal
speed (K/H)
frequency
(Second)
Top spin
Back spin
Wide
Among
Narrow
REMOTE
Horizontal
/OFFON
Vertical
speed frequency
Horizontal
W/A/N
Pattern
Reset
AC socket
AC PowerInt er f ace
4
Remote control:
Ant enna
REMOTE
stock
30
10
120120
Random
Vertical
Lob ball
Horizontal
speed (K/H)
frequency
(Second)
Top spin
Back spin
Wide
Among Narrow
REMOTE
Horizontal
/OFFON
Vertical
speed frequency
Horizontal
W/A/N
Pattern
Reset
Hor i zont al ( r i ght )
Frequency adj ust i ng but t on
On/Of f Swi t ch
Power swi t ch
wi de- l i ne/mi ddl e- l i ne/nar row- l i ne (cancel )
Reset (cl ear ) but t on
Speed adj ust i ng but t on
st ock but t on
Hor i zont al ( l ef t )
Ver t i cal movi ng
random but t on
LCD showi ng wi ndow
Accessory:: power cable
充电接口
/ 输出接口
便携式电池箱
连接线连接线
充电器
Warning▲
The products are the professional sports-goods equipment. We are not
responsible for any legal responsibility if any other people change the products for
other purpose and cause damage.
1. Installment Instruction
(i). Packing list
Description Quantity Description Quantity
Main machine parts one Ball bucket one
Fuse pipe one Ac power cable one
Remote control one manual one
5
(ii).Assembling
1. Overall installation of the main machine
Basc
Mai n machi neShoot i ng wi ndow
Bal l bucket
Basc
Pul l r od
Shoot i ng wi ndowMai n machi ne
Basc
Li f t i ng col umn
321
Base st and
Bal l bucket
4 5
Pul l r od
Li f t i ng col umn
Li f t i ng col umn
1) Takes out the main machine and its accessories, then lay aside on the package above
and properly.
2) Install the machine according to the steps ①,②,③,④,⑤.
2. Installation of lifting column
Base
Li f t i ng col umn
BaseLi f t i ng col umn
Li f t i ng col umn
X st and
1) Take out the X stand and install the screw according to the chart.
2) Connect the X stand and the lifting column and lock the fixed screw.
3) Then put the base above the X stand .
6
3. Installation of lifting column and main machine
Pul l r od
Base Base
Li f t i ng col umn
Mai n machi ne
Li f t i ng col umn
Mai n machi ne
Shoot i ng wi ndow
Shoot i ng wi ndow
Inst al l i ng scr ew
Inst al l i ng scr ew
1.Confirmed that the machine be placed in the ground level.
2.Adjust the angle round the machine, make the machine steady.
3.Connect the lifting column and main machine and lock the fixed screw.
4. Installation of ball bucket and main machine
Pul l r od
Base Base
Pul l r od
Shoot i ng wi ndow
Incur red
Inst al l i ng mark
Mai n machi ne
Li f t i ng col umn
Bal l bucket
Inst al l i ng mark
Incur red socket
Bal l bucket
Shoot i ng wi ndow
Mai n machi ne
Inst al l i ng mark
Li f t i ng col umn
1.According to the installing mark,put the ball bucket above the main machine like ③. make the
alignment of installing marks and lock it
2.When installing the ball bucket,there must move and press the ball bucket to make the
alignment of installing marks▲▼ .Do not scratch the surface of the machine when the ball
bucket aim at the installing hole.
7
5. The connection of Control circuit and lifting column
Wheel wi t h brake Pl ug Socket
BaseBase
Li f t i ng col umn
Pul l r od
Li f t i ng col umn
Connecting the plug and socket and lock it.
6. Fuse pipe
Pul l r od
protector
AC socket
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket DC socket
DC lamp
AC DC OFF
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Bal l bucket
AC Socket Li f t i ng power swi t ch
Back
Fuse pi pe cover
Fuse pi pe
Li f t i ng col umn
KAMET
120
8
Top spin
Narrow
Among
Vertical
ON/OFF
Random Back spin
Horizontal Wide
frequency frequency
speed speed
Reset
REMOTE
Narrow
Among
Wide
Back spin
Top spin
( Second) frequency
( K/H) speed
Horizontal
Lob ball
Vertical
Random
panel Cont rol
R
evolving the fuse pipe cover, assemble the fuse pipe and revolve it tightly.
7. Battery of the remote control
1) Used with the 9V dry battery.
2) Softly press and take out the battery cover..
3) Make the alignment of the“+”“-” of the battery and the“+”“-”of the remote control, incline
slightly the battery and put into the battery with the finger.
4) Covers the battery cover according to the reversed direction order.
5) Turns on the remote control switch, LCD have the display.
8
21
sof t l y press and t ake out t he bat t er y cover
i ncl i ne sl i ght l y t he bat t er yand mat ch t he "+""- "
Note: When installing or replacing the battery, please carefully examine “+” “-”
polarity, cannot connect reversely, otherwise it will be possible to damage the remote
control.
Warning▲
Do not allow minors to play with the machine. Do not stand in front of
the machine during working status to prevent people from getting hurt.
Use Instruction
The place of the machine in the court.
The machine should be placed in the middle of the baseline.
Shut t l ecock shoot er
9
1. The operation of higher and lower
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket DC socket
DC lamp
AC DC OFF
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
OFF DC AC
DC lamp
DC socket DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
stock
30
10
Spin
120
120
Random
Ver tical
Lob ball
Hori zontal
speed (K/H)
fr equency
(Second)
Top s pin
Bac k s pin
Wide
Among
Na rrow
Horizontal
/ OFFON
Verti cal
speed frequency
Horizontal
W/A/N
Patt ern
Reset
AC socket
protector
protector
AC socket
Reset
Patt ern
W/A/N
Horizontal
frequency speed
Verti cal
ON/ OFF
Horizontal
Na rrow
Among
Wide
Bac k s pin
Top s pin
(Second)
fr equency
(K/H) speed
Hori zontal
Lob ball
Ver tical
Random
120120
Spin
10
30
stock
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket DC socket
DC lamp
AC DC OFF
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
protector
AC socket
Reset
Patt ern
W/A/N
Horizontal
frequency speed
Verti cal
ON / OFF
Horizontal
Na rrow
Among
Wide
Bac k s pin
Top s pin
(Second) fr equency
(K/H) speed
Hori zontal
Lob ball
Ver tical
Random
120120
Spin
10
30
stock
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp DC lamp
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
stock
30
10
Spin
120120
Random
Ver tical
Lob ball
Hori zontal
speed (K/H)
fr equency
(Second)
Top s pin
Bac k s pin
Wide
Among
Na rrow
Horizontal
/ OFFON
Verti cal
speed frequency
Horizontal
W/A/N
Patt ern
Reset
AC socket
protector
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
OFF DC AC
DC lamp
DC socket DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
stock
30
10
Spin
120
120
Random
Ver tical
Lob ball
Hori zontal
speed (K/H)
fr equency
(Second)
Top s pin
Bac k s pin
Wide
Among
Na rrow
Horizontal
/ OFFON
Verti cal
speed frequency
Horizontal
W/A/N
Patt ern
Reset
AC socket
protector
DC lamp
DC socket
stock
30
10
Spin
120120
Random
Ver tical
Lob ball
Hori zontal
speed (K/H)
fr equency (Second)
Top s pin
Bac k s pin
Wide
Among
Na rrow
Horizontal
/ OFFON
Verti cal
speed frequency
Horizontal
W/A/N
Patt ern
Reset
AC socket
protector
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
OFF DC AC
DC lamp
DC socket DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
stock
30
10
Spin
120120
Random
Ver tical
Lob ball
Hori zontal
speed (K/H)
fr equency
(Second)
Top s pin
Bac k s pin
Wide
Among
Na rrow
Horizontal
/ OFFON
Verti cal
speed frequency
Horizontal
W/A/N
Patt ern
Reset
AC socket
protector
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
OFF DC AC
DC lamp
DC socket DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
ON/ OFF
Horizontal
Na rrow
Among
Wide
Bac k s pin
Top s pin
(Second) fr equency
(K/H) speed
Hori zontal
Lob ball
Ver tical
Random
DC lamp
DC socket
120120
Spin
10
30
stock
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket DC socket
DC lamp
AC DC OFF
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
B attery
Level
OFF DC AC
DC lamp
DC socket DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp DC lamp
DC socket
protector
AC socket
Reset
Patt ern
W/A/N
Horizontal
frequency speed
Verti cal
DC lamp
DC socket
DC lamp
DC socket
Bal l bucket
Mai n machi ne
Li f t i ng col umn
Cont rol panel
Li f t i ng power swi t ch Base
Cont rol panelMai n machi ne
Li f t i ng power swi t ch
Li f t i ng col umn
Bal l bucket
Li f t i ng power swi t ch
Mai n machi neCont rol panel
Bal l bucket
Bal l bucket
Mai n machi neCont rol panel
Li f t i ng col umn
Li f t i ng power swi t ch
Li f t i ng col umn
Mai n machi ne
Bal l bucket
Cont rol panel
Li f t i ng power swi t ch
Mai n machi neCont rol panel
Li f t i ng power swi t ch
Li f t i ng col umn
Bal l bucket
Mai n machi ne
Bal l bucket
Li f t i ng power swi t ch
Li f t i ng col umn
Cont rol panel
Bal l bucket
Mai n machi ne
Li f t i ng power swi t ch
Li f t i ng col umn
Cont rol panel
From the pictures ① to ④,it is the operating steps of making the machine up with lifting
remote control.And From the picture ⑤ to ⑦,it is the operating steps of making the
machine down with lifting remote control.
2. Remote control mode
◆ Choose the power
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
DC lamp
DC socket DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
stock
Spin
Random
Vertical
Lob ball
Horizontal
speed (K/H)
frequency
(Second)
Top spin
Back spin
Wide
Among
Narrow
Horizontal
/OFFON
Vertical
speed frequency
Horizontal
W/A/N
Pattern
Reset
AC socket
protector
OFF DC AC OFF DC AC
AC DC OFFAC DC OFF
protector
AC socket
Reset
Pattern
W/A/N
Horizontal
frequency speed
Vertical
ON/OFF
Horizontal
Narrow
Among
Wide
Back spin
Top spin
(Second) frequency
(K/H) speed
Horizontal
Lob ball
Vertical
Random
Spin
stock
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket DC socket
DC lamp
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
00000
AC DC
OFF
Choosi ng AC or DC power
1. Choose the switch position“II”, ie, choose the “AC” power.then the power indication light will
be on, the ball speed of LCD display is“00”and the frequency is “0” .
2. Choose the switch position“I”,ie,choose the “DC” power.then the power indication light will
be on, the ball speed of LCD display is“00”and the frequency is “0” .
3. Choose the switch position“0”,ie,turn off the power.then the power indication light will be off.
10
◆ Turn on the remote control switch
r emot econt rolpowerswi t ch
1. Make sure well-assembling the battery.
2. Turn on the remote control switch.
◆ Start the machine
Vertical
AC DC OFFAC DC OFF
protector
8 Horizontal
speed (K/H)
frequency
(Second)
Top spin
Back spin
Wide
Among Narrow
protector
DC socket DC socket
AC socket
DC lamp
AC DC
OFF ON/OFF
120120
Random
The l i ght i s on
Choosi ng AC or DC power
1. Choose “AC” or “DC” power.
2. Softly touch the “ON/OFF” button, then will a sound ”di” and the ball speed of the LCD
display is 120 km/hr(set by factory),the ball frequency is “8” second/ball, and the main
engine begins to work, the machine is in the state of the readiness for action.
3. Softly touch again the “ON/OFF” or “Reset” button, the machine stop working.
Note: ●“Reset” is the clear button, when softly touch this button, it will clear all
the program settings(Except the self-programming)
● When starting the machine, the power light and the electric quantity light
will twinkle, which is the normal phenomenon, for the instantaneous
pressure is big at first.
● The machine have the delay-serve function, when softly touching
the“ON/OFF” button,the machine will serve the ball after 5 seconds
automatically.
◆ Adjust the ball speed
11
ON/OFF speedVertical
AC DC OFFAC DC OFF
protector
8 Horizontal
speed (K/H)
frequency
(Second)
Top spin
Back spin
Wide
Among
Narrow
protector
DC socket DC socket
AC socket
DC lamp
Li ght i s on
30-15030-150
Random
1. Softly touch the “ON/OFF” button and start the machine.
2. Softly touch the button “speed△up” “speed▽down”, then adjust the ball speed in the
range of 30 to 150 km/hr .
3. Softly touch again the “ON/OFF” or “Reset” button, the machine stop working.
◆ Adjust the ball frequency
frequency Vertical
AC DC OFFAC DC OFF
protector
Horizontal
speed (K/H)
frequency
(Second)
Top spin
Back spin
Wide
Among Narrow
protector
DC socket DC socket
AC socket
DC lamp
120120
2-12
ON/OFF Random
Li ght i s on
1.Softly touch the “ON/OFF” button and start the machine.
2.Softly touch the button “frequency△up” “frequency▽down”, then adjust the ball
frequency in the range of 2 to 12 sec/ball.
3.Softly touch again the “ON/OFF” or “Reset” button, the machine stop working.
◆ Choose the place of horizontal ball
Horizontal/OFFONBattery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
OFF DC AC
DC lamp
DC socket DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
stock
30
10
Spin
120120
Random
Vertical
Lob ball
Horizontal
speed (K/H)
frequency
(Second)
Top spin
Back spin
Wide
Among Narrow
Horizontal
/OFFON
Vertical
speed frequency
Horizontal
W/A/N
Pattern
Reset
AC socket
protector
12
1. Touch softly the “ON/OFF” button and start the machine.
2. Touch ‘Horizontal’ ◤(Left) the first time,horizontal serving ball in the middle place(set by
factory) move to left with some degree(4°-8°),see the above picture from C to B ; Touch
‘Horizontal’ ◤(Left) the second time,the position of horizontal serving ball swing to left with
some degree(4°-8°) again,see the above picture from B to A ;
Then touch ‘Horizontal’ ◥(Right) the first time,the position of horizontal serving ball will
return back and swing to right with some degree(4°-8°), see the above picture from A to B.
3. Touch repeatedly ‘Horizontal’ ◥(Right), horizontal serving ball with the same position
one by one from B to C,from C to D, from D to E .
4. This operating repeatedly can control the angle of horizontal serving ball .
5. Touch softly again the “ON/OFF” or “Reset” button, the machine stop working.
◆ Choose the place of vertical ball
protector
AC socket
Reset
Pattern
W/A/N
Horizontal
frequency speed
Vertical
ON/OFF
Horizontal
Narrow
Among
Wide
Back spin
Top spin
(Second) frequency
(K/H) speed
Horizontal
Lob ball
Vertical
Random
120120
Spin
10
30
stock
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket DC socket
DC lamp
AC DC OFF
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
ON/OFF Vertical
1. Touch softly the “ON/OFF” button and start the machine.
2. Touch ‘Vertical’ △ button the 1st time,serving ball in the position of flat stroking upward
swing at an angle (5°-10°),see the above picture from A to B; touch ‘Vertical’ △button the
2nd time, the position of vertical serving upward swing at an angle (5°-10°) again,see the
above picture from B to C; touch ‘Vertical’ △ button the 3rd
time, the position of vertical serving upward swing at an angle (5°-10°) again,see the
above picture from C to D.
3. Touch ‘Vertical’ ▽ button the 1st time,serving ball from the highest position downward
swing at an angle (5°-10°),see the above picture from D to C; touch ‘Vertical’ ▽ button the
2nd time, the position of vertical serving downward swing at an angle (5°-10°) again,see the
above picture from C to B; touch ‘Vertical’ ▽ button the 3rd time, the position of vertical
serving downward swing at an angle (5°-10°) again,see the above picture from B to A.
4. This operating repeatedly can control the angle of serving ball .
5. Touch softly again the “ON/OFF” or “Reset” button, the machine stop working.
13
◆ Choose the horizontal ball shooting
/OFFON W/A/N
protector
AC socket
Reset
Pattern
W/A/N
Horizontal
frequency speed
Vertical
ON/OFF
Horizontal
Narrow
Among
Wide
Back spin
Top spin
(Second) frequency
(K/H) speed
Horizontal
Lob ball
Vertical
Random
120120
Spin
10
30
stock
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket DC socket
DC lamp
AC DC OFF
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
1. Softly touch the “ON/OFF” button and start the machine.
2. Softly touch “W/A/N” button four times,set the horizontal ball shooting,then all the
will be full
3. Softly touch again the “ON/OFF” or “Reset” button, the machine stop working.
Note: Touch “W/A/N” button the first time, set the Wide-line ball shooting
Touch “W/A/N” button the second time, set the Among-line ball shooting
Touch “W/A/N” button three times ,set the Narrow-line ball shooting
Touch “W/A/N” button four times, set the horizontal ball shooting.
Touch “W/A/N” button five times, cancel all the functions above.
◆ Choose parallel drive serving
VerticalVertical
AC DC OFFAC DC OFF
protector
8 Horizontal
speed (K/H)
frequency
(Second)
Top spin
Back spin
Wide
Among
Narrow
protector
DC socket DC socket
AC socket
DC lamp
120120
speed/OFFON Random
Li ght i s on
1. Softly touch the “ON/OFF” button and start the machine.
2. Softly touch “Vertical” △button the first time, the machine choose parallel drive
service
3. Softly touch “speed ” △ button once, set the speed to 100-120 km/h.
14
◆ Choose punching shot serving
VerticalVertical
AC DC OFFAC DC OFF
protector
8 Horizontal
speed (K/H)
frequency
(Second)
Top spin
Back spin
Wide
Among
Narrow
protector
DC socket DC socket
AC socket
DC lamp
120120
speed/OFFON Random
Li ght i s on
1.Softly touch the “ON/OFF” button and start the machine.
2.Softly touch “Vertical” △button the second time, the machine choose parallel drive service.
3.Softly touch “speed ” △ button twice, set the speed to 90-130 km/h.
◆ Choose full base lifting serving
Mi d-net
Vertical speed/OFFON Vertical
AC DC OFFAC DC OFF
protector
8 Horizontal
speed (K/H)
frequency
(Second)
Top spin
Back spin
Wide
Among Narrow
protector
DC socket DC socket
AC socket
DC lamp
Li ght i s on
120120
Random
Posi t i on
Mai n machi neShoot i ng wi ndow
Bal l bucket
Li f t i ng power swi t ch
Li f t i ng col umn
Bal l bucket
B
Base
l i f t i ng col umn
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
OFF DC AC
DC lamp
DC socket DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
stock
30
10
Spin
120120
Random
Vertical
Lob ball
Horizontal
speed (K/H)
frequency
(Second)
Top spin
Back spin
Wide
Among
Narrow
Horizontal
/OFFON
Vertical
speed frequency
Horizontal
W/A/N
Pattern
Reset
AC socket
protector
panel cont rol
1.Adjust the position of the shuttlecock shooter like the picture A.
2. Turn on the lifting switch on base like the picture ①,② and operate with lifting remote
control,let the machine to the outmost height like the picture B.
3. Softly touch the “ON/OFF” button and start the machine.
4. Softly touch “Vertical” △ button three times, the machine choose full base lifting serving
5. Softly touch “speed ” △ button once, set the speed to 120-140 km/h.
15
Choose base lobing servin
Mi d-net
Vertical speed/OFFON Vertical
AC DC OFFAC DC OFF
protector
8 Horizontal
speed (K/H)
frequency
(Second)
Top spin
Back spin
Wide
Among Narrow
protector
DC socket DC socket
AC socket
DC lamp
Li ght i s on
120120
Random
Posi t i on
panel cont rol
protector
AC socket
Reset
Pattern
W/A/N
Horizontal
frequency speed
Vertical
ON /OFF
Horizontal
Narrow
Among
Wide
Back spin
Top spin
(Second)
frequency
(K/H) speed
Horizontal
Lob ball
Vertical
Random
120120
Spin
10
30
stock
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket DC socket
DC lamp
AC DC OFF
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
l i f t i ng col umn
Base
B
Bal l bucket
Li f t i ng col umn
Li f t i ng power swi t ch
Bal l bucket
Shoot i ng wi ndow Mai n machi ne
1.Adjust the position of the shuttlecock shooter like the picture A.
2.Turn on the lifting switch on base like the picture ①,②and operate with lifting remote
control,let the machine to the outmost height like the picture B.
3.Softly touch the “ON/OFF” button and start the machine.
4.Softly touch “Vertical” button three times, the machine choose base lobing serving
5.Softly touch “speed ” △ button once, set the speed to 150 km/h.
Note: Softly touch “Vertical” △ button once, the machine will choose parallel drive
serving; Softly touch “Vertical” △ button twice, the machine will choose parallel drive
serving; Softly touch “Vertical” △ button three times, the machine will choose full base
lifting and base lobing. Softly touch “Vertical” △ button four times, the machine will cancel
the above three functions.
16
◆ Choose the smash serving
Mi d-net
Vertical speed/OFFON Vertical
AC DC OFFAC DC OFF
protector
8 Horizontal
speed (K/H)
frequency
(Second)
Top spin
Back spin
Wide
Among
Narrow
protector
DC socket DC socket
AC socket
DC lamp
Li ght i s on
120120
Random
Posi t i on
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
stock
30
10
Spin
120
120
Random
Vertical
Lob ball
Horizontal
speed (K/H)
frequency
(Second)
Top spin
Back spin
Wide
Among
Narrow
Horizontal
/OFFON
Vertical
speed frequency
Horizontal
W/A/N
Pattern
Reset
AC socket
protector
panel cont rol
l i f t i ng col umn
Mai n machi neShoot i ng wi ndow
Bal l bucket
Li f t i ng power swi t ch
Li f t i ng col umn
Bal l bucket
B
Base
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
Battery
Level
OFF DC AC
DC lamp
DC socket DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
DC socket
DC lamp
1. Adjust the position of the shuttlecock shooter like the picture A.
2. Turn on the lifting switch on base like the picture 1,2 and operate with lifting remote
control,let the machine to the outmost height like the picture B.
3. Softly touch the “ON/OFF” button and start the machine.
4. Softly touch “Vertical” “▽” button to the lowest position, the machine choose the smash
serving
5. Softly touch “speed ” △ button once, set the speed to 150 km/h.
Warning▲
Do not allow minors to play with the machine.Do not stand in front of
the machine during working status to prevent people from getting hurt.
The 2-line function is especially interesting for training groups of badminton players. When
2 groups of badminton players are on the badminton court, each group gets one ball every
time at the same place. Without the 2-line function, the ball will be shot on different places
and also in between the two groups. With the 2-line function the trainer could exactly say
the group1 plays forehands and group2 plays backhands. Therefore this function is very
popular among badminton trainers who want to train 2 groups of players.
17
◆ Choose the forehand or backhand wide-line ball shooting.
Vertical
AC DC OFFAC DC OFF
protector
8 Horizontal
speed (K/H)
frequency
(Second)
Top spin
Back spin
Wide
Among Narrow
protector
DC socket DC socket
AC socket
DC lamp
120120
ON/OFF W/A/N Random
Li ght i s on
1. Softly touch the “ON/OFF” button and start the machine.
2. Softly touch “W/A/N” button once, set the wide-line ball shooting.
3. Softly touch again the “ON/OFF” or “Reset” button, the machine stop working.
Note: The distance of the wide-line is 4 to 5 meters, It is convenient for trainers
by single or two persons to run-training forehand and backhand by big
step at the same time.
◆ Choose the forehand or backhand Among-line ball shooting
Vertical
AC DC OFFAC DC OFF
protector
8 Horizontal
speed (K/H)
frequency
(Second)
Top spin
Back spin
Wide
Among Narrow
protector
DC socket DC socket
AC socket
DC lamp
120120
ON/OFF W/A/N Random
Li ght i s on
1.Softly touch the “ON/OFF” button and start the machine.
2.Softly touch “W/A/N” button twice, set the middle-line ball shooting.
3.Softly touch again the “ON/OFF” or “Reset” button, the machine stop working.
Note: the distance of the medium-line is 3 to 4 meters, It is convenient for trainers
by single or two persons to run-training forehand and backhand by
small scale at the same time.
18
◆ Choose the forehand or backhand narrow-line ball shooting
Vertical
AC DC OFFAC DC OFF
protector
8 Horizontal
speed (K/H)
frequency
(Second)
Top spin
Back spin
Wide
Among Narrow
protector
DC socket DC socket
AC socket
DC lamp
120120
ON/OFF W/A/N Random
Li ght i s on
1.Softly touch the “ON/OFF” button and start the machine.
2.Softly touch “W/A/N” button three times, set the narrow-line ball shooting.
3.Softly touch again the “ON/OFF” or “Reset” button, the machine stop working.
Note: the distance of the narrow-line is 2 to 3 meters, It is convenient for
trainers by single or two persons to run-training forehand and backhand by
small step at the same time.
◆ Self-programming(Set)
PatternOFF
DC AC
stock /OFFON
Horizontal
Vertical
/
1. Select AC or DC power.
2. Touch softly ‘Pattern’ button the 1st time, to select the self-programming.
3. When you select the self-programming(the lower left corner shows ‘30’,at the same
19
time there is a blinking cursor between 1 and 20). Touch softly ‘Vertical’ button move
the cursor up and down or touch softly ‘Horizontal’ button move the cursor left and
right to select the points(1-20) that you need. When the point is blinking ,in that time
you can touch the ‘Stock’ button to stock this point.. You can operate repeatedly to
store many points as a program mode.(For example, you want to set ‘2’,’4’,’8’ as a
training mode.Firstly,move the ‘Horizontal’ ◤(Left) and ◥(Right) button to ‘2’ ,then
touch the ‘stock’ button to store,so the point ’2’ has been stored. With the same way
to store point ‘4’.At last, move the ‘vertical’ ▲(Up) and▼(Down) to ‘8’,touch the
‘Stock’ button to stock this point. So the serving points are set to’2’,’4’,’8’)
4. Touch softly the “ON/OFF” button and start the machine
Touch softly “Pattern” button the 1st time,set the self-programming; touch the 2
nd time,to set
the random ball shooting; touch the 3rd
time, stop the above two functions.
◆ Self-programming(Cancel)
Pattern
/
OFF
DC AC
W/A/N ON/OFFStockVertical
Horizontal
1. Select AC or DC power.
2. Touch softly ‘Pattern’ button the 1st time, to select the self-programming.
3. Touch softly ‘Vertical’ button move the cursor up and down or touch softly ‘Horizontal’
button move the cursor left and right to select the points(1-20) that you need. When the
point is blinking ,in that time you can touch the ‘W/A/N’ button to cancel this point.. You can
operate repeatedly to cancel all points which you set.(For example, you want to cancel
‘2’,’4’,’8’ this training mode. Firstly, move the ‘Horizontal’ ◤(Left) and ◥(Right) button to
‘2’ ,then touch the ‘W/A/N’’ button to cancel this point, in that time the point ’2’ has been
cancelled. With the same way to cancel point ‘4’.At last, move the ‘vertical’ △(Up) and▽
(Down) to ‘8’,touch the ‘W/A/N’ button to cancel this point, then you need to touch the
‘stock’ button, in that time points‘ 2’,’4’,’8’ have been cancelled.
Note: The function of the ‘W/A/N’ button become cancel function when in the
self-programming mode.
Touch softly “Pattern” button the 1st time,set the self-programming; touch the 2
nd time,to set
the random ball shooting; touch the 3rd
time, stop the above two functions.
20
◆ Choose the random ball shooting
AC DC
OFF Pattern ON/OFF
Choose AC/DC power
1. Touch softly the “ON/OFF” button and start the machine
2. Touch softly ‘Pattern’ button the 2nd
time,to set the random ball shooting, different
combinations of ball speed、 fixed、 flat stroke、horizontal swing、horizontal
displacement、vertical displacement、lob、topspin、backspin、wide-line、Among-line、
Narrow-line)。Every program can be changed automatically (30 seconds/program).
3. Touch softly again the “ON/OFF” or “Reset” button, the machine stop working.
Note:1. Touch softly “Pattern” button the 1st time,set the self-programming; touch the 2
nd
time,to set the random ball shooting; touch the 3rd
time, stop the above two functions.
2. random mode 2-line(narrow line) program of random ball shooting:12 kinds
4-line(narrow line and among line) program of random ball shooting:14 kinds
6-line(narrow line,among line and wide line) program of random ball shooting:16 kinds
◆ Other functions
3. Reset function: press the button to clear all functions due to mis-operation and other
reasons.
4. Function can be switched randomly except topspin and backspin.
5. The battery electric quantity show: when all the lights are on, it means sufficient; when
part of the lights are on ,it means you must charging.
Panel control mode
Note: The panel control mode is the same as the remote control mode, no repeat
now.
Warning▲
The products are the professional sports-goods equipment. We are not
responsible for any legal responsibility if any other people change the products for
other purpose and cause damage.
21
Maintenance
1. Normal phenomenon
Note: When softly touch the function button, the LCD has the relevant show, but the
machine is not working, it means the main machine maybe did not receive the
signal, only need touching the reset button and re-operation. It is the normal
phenomenon.
The normal phenomenon as follows:
phenomenon Reason
◆After unpacking the
machine, there are few
badminton fur on the
machine and little stain on
the engine
◆It is left over by examination when ex-factory.
◆When starting the
machine, the power light
is twinkling and dark .
◆It is caused by the big pressure when suddenly starting the
machine.
◆The machine is not
working according to
the instruction of the
remote control.
◆there is interfering signal nearby.
◆the distance is far between the remote control and the
main machine.
◆please pull out the antenna.
◆The over-currency
device will protect the
machine sometimes
when starting the
machine .
◆It is caused by the big pressure when suddenly starting the
machine.
◆When touching, the
remote control has no
response .
◆the switch is not turned on .
◆no battery.
◆The battery electric quantity is low.
Warning▲
Do not allow minors to play with the machine.Do not stand in front of
the machine during working status to prevent people from getting hurt.
22
2. Trouble examination
phenomenon Reasons methods
◆The shuttlecock
shooter is not
working and the
instruction light is
not on .
◆The power plug of AC/DC is broken or not
insert firmly.
◆The over-currency device will protect the
machine.
◆The power fuse of AC/DC is burn-out.
◆The battery electric quantity is low.
◆Not choose the AC/DC correctly.
◆Change or insert firmly the
power plug of AC/DC.
◆Reset the over-currency device
◆Change the power fuse of AC/DC.
◆Charge the battery.
◆Please choose the AC/DC
correctly.
◆The shuttlecock
shooter is not
working and the
instruction light is on.
◆Not turn on the switch of panel control or
remote control.
◆Poor connection of the internal machine.
◆The control parts of the internal machine is
broken.
◆Please turn on the switch of panel
control or remote control.
◆Please contact with the
manufacturer.
◆Please contact with the
manufacturer or dealer.
◆The ball-shooting
is powerless
◆The power of AC/DC is not normal.
◆The spring of the badminton ball is not
enough .
◆The control parts of the internal machine is
broken.
◆Please examine the power of
AC/DC.
◆Please change the badminton ball.
◆Please contact with the
manufacturer or dealer.
3. Maintenance
Note: If you do not use the machine for a long time, please pay attention to these
items as follows:
▲The battery and electricity must be far away with the heat power.
▲Take out the battery of the remote control.
▲Preserve the power cable and the battery cable.
▲Turn off the switch of the remote control to avoid loosing electricity.
1. Do any cleaning or maintaining must cut the power.
2. Half wet soft cloth with detergent can be used to clean the outside dust. Do not use
volatile liquid to clean the baking paint outside part.
3. The internal machine maybe accumulate much badminton felt after long time use,
please use the gum with magic tape to stick it out or use the air blower and blower it out.
Attention:▲Before you do any cleaning or maintaining you must cut the power.
▲ Avoid water, oil and other acid material to penetrate into the machine.
Warning▲
The products are the professional sports-goods equipment. We are not
responsible for any legal responsibility if any other people change the products
for other purpose and cause damage.
Yuva Horizon Wings Limited
Unit B 2nd Floor, Season Building No.40-48 Tung On Street, Yau Ma Tei, Kowloon, Hong Kong
Telephone : (852) 2811 1502 Fax : (852) 2811 1503 E-mail: [email protected]
www.dayalssports.com
Top Related