With a base of solid experience, the latest in technological advancements and a focus on the needs of the customer, NAP Gladusurpasses its goal of providing more than just a cutting tool. We are your application engineers, engineering department, problemsolvers and partners in the drive to success.
Technology: The Competitive EdgeInteractive design...application engineering...problem solving: NAP Gladu dramatically expands your capabilities. With one of the
most sophisticated engineering departments in the industry, NAP Gladu is able to provide solutions to your most challenging toolingneeds. Our network of computer-controlled systems is capable of direct electronic feeds from off-site locations ... including yours. Thisenables us to measure tool patterns with precision for exact pattern duplication every time. When it comes to designing andmanufacturing tooling for your specific application, NAP Gladu uses its experience, knowledge and technical expertise to ensure thatyou get tooling that meets or exceeds your expectations -- guaranteed.
Service: Speed & Precision NAP Gladu offers unmatched reliability in the delivery of new and serviced tools. Customers depend on us for fast turnaround
times. What's more, they can count on NAP Gladu to do the job right the first time, every time.
Customer Focused & Technology Driven
USA 812.482.2000 • FAX 800.385.6049 • 800.634.8665 www.napgladu.com CANADA 450.460.4481 • FAX 888.660.2655 • 800.363.9117
© Copyright NAP Asset Holdings Ltd. 2013 All Rights Reserved Issue Date: 10/01/14
Table of Contents
3
Page
Ordering Instructions 4
Sharper & Tenon Heads
Additional Charges 5
Spiracut Shaper Heads 6
TH12 Reversible Tenon Head 7
Whisper Quiet Moulder Heads
Additional Charges 8
Information 9
Whisper Quiet I Moulder Head 10-11
Whisper Quiet II Moulder Head 12-13
Whisper Quiet II Insert Cutter 14
Page
Straight Cutter Heads
Additional Charges 15
Information 16-17
Mill-to-Pattern Profile Cutter Heads
Additional Charges 18
Information 19-20
Brazed Profile Router Bits
Additional Charges 21
Information 22
USA 812.482.2000 • FAX 800.385.6049 • 800.634.8665 www.napgladu.com CANADA 450.460.4481 • FAX 888.660.2655 • 800.363.9117
© Copyright NAP Asset Holdings Ltd. 2013 All Rights Reserved Issue Date: 10/01/14
TENON AND SHAPER HEADS• BORE SIZE AND STYLE
q Straight q Cone collet q Sleeve
• KEYWAY SIZE AND QUANTITYq Specify the size, quantity, and location
(i.e. staggered)
• SPECIFY TYPE OF MATERIAL BEING CUT
MOULDER HEADS• STYLE
q 4WQI, 4WQII, 6WQI or 6WQIIq 4WQI and II are 4 wing equivalentsq 6WQI and II are 6 wing equivalents
• BORE SIZE AND STYLEq Straight q Cone collet q Sleeve
• HOOK ANGLEq Soft wood 20 degreesq Hard wood 10 degrees
• SPECIFY TYPE OF MATERIAL BEING CUT
ADJUSTABLE INSERT CUTTERS• ADJUSTABILITY
q Vertical adjustment (up and down) .100”.This depth of cut is based on a 5-1/2” or6-1/2” diameter head.
• USED MOULDER HEADq If plugs are for used moulder heads,
you must specify the exact diameter.
• SPECIFY TYPE OF MATERIAL BEING CUT
STRAIGHT CUTTER HEADS• BORE AND STYLE
q Straight q Cone collet q Sleeve
• SPECIFY TYPE OF MATERIAL BEING CUT
MILL TO PATTERN CUTTER HEADS• COLLAR SIZE
q If tool runs with a rub collar or bering,you must specify its diameter.
• DIAMETERq Dimension either the large or small
diameter of the pattern.q Does the tool run in sets? If so, specify
if matching diameters are required.
• BORE SIZE AND STYLEq Straight q Cone collet q Sleeve
• KEYWAYq Specify the size, quantity and location
(i.e. staggered)
• QUANTITY IN RH OR LH ROTATIONq Specify either RH or LH rotation and how
many of each.
• MOUNTING HOLESq Quantity, size and bolt circleq If the holes are to be countersunk, specify which side
is countersunk with the top tooth face coming.
• ASSEMBLED CUTTERSq Just locating pins?q Bolted together?q Hub mounted and pinned?q Hub mounted and bolted?
• SPECIFY TYPE OF MATERIAL BEING CUT
MILL TO PATTERN ROUTER BITS• SHANK DIAMETER
q Always specify the shank diameter and the length.
• DIAMETERSq Include the dimension for the large
diameter to be held.q Include the dimension for the small
diameter to be held.
• SPECIFY TYPE OF MATERIAL BEING CUT
4
Ordering Instructions
a) All graphic illustrations are for reference only. Your actual application may vary.b) Sizes depicted in this catalog are only representative of our product line. Additional sizes available upon request.
FACECOMING
MILL TO PATTERNCUTTER HEADSKETCHES
Always make your sketchas shown with the toptooth face coming
FACECOMING
USA 812.482.2000 • FAX 800.385.6049 • 800.634.8665 www.napgladu.com CANADA 450.460.4481 • FAX 888.660.2655 • 800.363.9117
© Copyright NAP Asset Holdings Ltd. 2013 All Rights Reserved Issue Date: 10/01/14 55
Shaper & Tenon Heads
Description of Additional ChargeItems And Special Features
5/32” Thick Carbide
Bores Over 2.125 (2-1/8”)
Cone Bore
Face Shear Both Directions
Face Shear One Direction
Hubs and Trepans (up to 1 inch)
Hubs and Trepans (over 1 inch)
Keyways
Mounting Holes (qty. 1-6)
Mounting Holes (qty. 7+)
Set Screw Mounting
Shim Stock
Sleeve Bore
TC-4 (Tantung, Crobalt)
Add Hydro Bore to Heads up to 5”
Add Hydro Bore to Heads >5”
Add Grease Fitting & Release to O.D.
NP552 - High Pressure Grease Gun
NP553 - High Pressure Hose
NP554 - Hydraulic Connector
NP555 - Grease Cartridge
NOTE: Any modifications not found on this page must be by special quotation only.
ADDITIONAL CHARGES
USA 812.482.2000 • FAX 800.385.6049 • 800.634.8665 www.napgladu.com CANADA 450.460.4481 • FAX 888.660.2655 • 800.363.9117
© Copyright NAP Asset Holdings Ltd. 2013 All Rights Reserved Issue Date: 10/01/146
Spiracut Shaper Heads
APPLICATIONS• Used on both hand and automatic feed shaper operations.• Excellent tool for rip and end grain cuts.
TECHNICAL INFORMATION• Head is 2 wing effective.• Spiral tooth design for reduced cutting pressure.• 25 degree hook is standard.• Additional hook angles available upon request.• Stagger tooth design replaces two wing straight knife heads.• Specify straight or cone collet bore.
ADVANTAGES• Reduced cutting pressure and spiral teeth require less
horsepower over straight knife heads.• Less noise generated.• Minimal tear out.• Individual teeth facilitate lower total maintenance cost.
U.S. Part No. Head Diameter Number of Teeth Cutting Width
SSH 4-3 4” 18 3”
SSH 4-4 4” 24 4”
SSH 4-5 4” 30 5”
SSH 4-6 4” 36 6”
Bore sizes available in 1”, 1-1/8” and 1-1/4”. Other bores available upon request.Additional cutting widths available upon request by special quotation only.
The spiracut shaper head is C.N.C. machined from solid steel for accuracy.Spiral tooth design for reduced cutting pressure and faster feed rates.
USA 812.482.2000 • FAX 800.385.6049 • 800.634.8665 www.napgladu.com CANADA 450.460.4481 • FAX 888.660.2655 • 800.363.9117
© Copyright NAP Asset Holdings Ltd. 2013 All Rights Reserved Issue Date: 10/01/14
The TH12 Tenonhead is C.N.C.machined fromsolid steel foraccuracy. TwoTH12replacement sawsare mounted oneach side toprovide clean cutswith minimumtearout.
7
TH12 Reversible Tenon Head
NOTES: • The reversible position utilizes 1/2 or less of the total cutting width of the head. The
unused area can then be used by mounting the head in the opposite position. Only onetrim blade is needed in the non-reversible position.
• For open end sleeve mount, you must add on the price of the sleeve (see accessoriessection).
APPLICATIONS• Designed for single and double end tenon machines.• Used to cut hard and soft woods, veneers, laminated plastic,
particleboard, etc.
TECHNICAL INFORMATION• Center cutter is a one piece staggered tooth design.• Trim blades on each side incorporate a 3:1 tooth design and
are mounted to the center of cutter for concentricity.
ADVANTAGES• Head is reversible for double production life over
conventional heads.• Trim saws act as scoring saws to deliver a clean smooth
edge on the material.
U.S. Part No. Head Diameter Cutting Width
TH12-8-2 8” 2”
TH12-8.75-2 8-3/4” 2”
TH12-8-3 8” 3”
TH12-8.75-3 8-3/4” 3”
NOTE: Includes two trim saws
TH12 REPLACEMENT SAWSU.S. Part No. Head Diameter Number of Teeth
TH12-8-44 8” 44
TH12-8.75-44 8-3/4” 44
USA 812.482.2000 • FAX 800.385.6049 • 800.634.8665 www.napgladu.com CANADA 450.460.4481 • FAX 888.660.2655 • 800.363.9117
© Copyright NAP Asset Holdings Ltd. 2013 All Rights Reserved Issue Date: 10/01/148
Whisper Quiet Moulder Heads
ADDITIONAL CHARGESDescription of Additional ChargeItems And Special Features
Bores Over 2.125 (2-1/8”)
Cone Bore
Hubs and Trepans (up to 1 inch)
Hubs and Trepans (over 1 inch)
Keyways
Mounting Holes (qty. 1-6)
Mounting Holes (qty. 7+)
Set Screw Mounting
Sleeve Bore
Add Hydro Bore to Heads up to 5”
Add Hydro Bore to Heads >5”
Add Grease Fitting & Release to O.D.
NP552 - High Pressure Grease Gun
NP553 - High Pressure Hose
NP554 - Hydraulic Connector
NP555 - Grease Cartridge
NOTE: Any modifications not found on this page must be by special quotation only.
USA 812.482.2000 • FAX 800.385.6049 • 800.634.8665 www.napgladu.com CANADA 450.460.4481 • FAX 888.660.2655 • 800.363.9117
© Copyright NAP Asset Holdings Ltd. 2013 All Rights Reserved Issue Date: 10/01/14 9
Whisper Quiet Moulder Heads
APPLICATIONS• For running dimension stock in through feed or conventional
moulders.
TECHNICAL INFORMATION• Stagger tooth design on a one piece head.• Available in soft wood (20°) and hard wood (10°) hook
angles.• Additional hook angles available upon request.• Available in either a 4 wing (4WQI and 4WQII) or 6 wing
(6WQI or 6WQII) equivalent. Other wing counts quote only.
ADVANTAGES• Additional cutting widths available upon request.• Lower noise levels.• Smooth finish on material (no lines).• Stagger tooth design for deeper cuts and reduced
horsepower requirements.• Individual teeth facilitate lower total maintenance cost.• WQII slots allow for the insertion of adjustable insert cutters
for shaping and molding simultaneously.
Staggered tooth design reduces air turbulence, noise and cutting pressures on the material. Made from a one piece
solid steel body. Pictured is a Whisper Quiet II style.
USA 812.482.2000 • FAX 800.385.6049 • 800.634.8665 www.napgladu.com CANADA 450.460.4481 • FAX 888.660.2655 • 800.363.9117
© Copyright NAP Asset Holdings Ltd. 2013 All Rights Reserved Issue Date: 10/01/1410
Whisper Quiet I Moulder Head
The Whisper Quiet Moulder Head is the equivalent to a four (4)knife head. It has 8 rows of staggered teeth. Please specify thehook angle when ordering. Standard hook angle is either 20° (softwood) or 10° (hard wood).
Head Number of Cutting Width Number of CuttingDiameter Teeth per Tooth Effective Wings Width
5” 32 .500” 4 4”
5” 48 .500” 4 6”
5” 64 .500” 4 8”
5” 80 .500” 4 10”
5” 96 .500” 4 12”
5-1/2” 32 .500” 4 4”
5-1/2” 48 .500” 4 6”
5-1/2” 64 .500” 4 8”
5-1/2” 80 .500” 4 10”
5-1/2” 96 .500” 4 12”
6” 32 .500” 4 4”
6” 48 .500” 4 6”
6” 64 .500” 4 8”
6” 80 .500” 4 10”
6” 96 .500” 4 12”
6-1/2” 32 .500” 4 4”
6-1/2” 48 .500” 4 6”
6-1/2” 64 .500” 4 8”
6-1/2” 80 .500” 4 10”
6-1/2” 96 .500” 4 12”
8” 32 .500” 4 4”
8” 48 .500” 4 6”
8” 64 .500” 4 8”
8” 80 .500” 4 10”
8” 96 .500” 4 12”
Straight, Cone, or Sleeve Bore is available. Available in either 10° or 20° hook angle.
4 WING HEAD
USA 812.482.2000 • FAX 800.385.6049 • 800.634.8665 www.napgladu.com CANADA 450.460.4481 • FAX 888.660.2655 • 800.363.9117
© Copyright NAP Asset Holdings Ltd. 2013 All Rights Reserved Issue Date: 10/01/14 11
Whisper Quiet I Moulder Head
The Whisper Quiet Moulder Head is the equivalent to a six (6)knife head. It has 12 rows of staggered teeth. Please specify thehook angle when ordering. Standard hook angle is either 20° (softwood) or 10° (hard wood).
Head Number of Cutting Width Number of CuttingDiameter Teeth per Tooth Effective Wings Width
5-1/2” 72 .330” 6 4”
5-1/2” 108 .330” 6 6”
5-1/2” 144 .330” 6 8”
5-1/2” 180 .330” 6 10”
5-1/2” 216 .330” 6 12”
6” 72 .330” 6 4”
6” 108 .330” 6 6”
6” 144 .330” 6 8”
6” 180 .330” 6 10”
6” 216 .330” 6 12”
6-1/2” 72 .330” 6 4”
6-1/2” 108 .330 6 6”
6-1/2” 144 .330 6 8”
6-1/2” 180 .330” 6 10”
6-1/2” 216 .330” 6 12”
8” 72 .330” 6 4”
8” 108 .330” 6 6”
8” 144 .330” 6 8”
8” 180 .330” 6 10”
8” 216 .330” 6 12”
6 WING HEAD
USA 812.482.2000 • FAX 800.385.6049 • 800.634.8665 www.napgladu.com CANADA 450.460.4481 • FAX 888.660.2655 • 800.363.9117
© Copyright NAP Asset Holdings Ltd. 2013 All Rights Reserved Issue Date: 10/01/1412
Whisper Quiet II Moulder Head
The Whisper Quiet Moulder Head is the equivalent to a four (4)knife head. It has 8 rows of staggered teeth. Please specify thehook angle when ordering. Standard hook angle is either 20° (softwood) or 10° (hard wood). The Whisper Quiet II has 4 dovetailslots milled into the head to receive the insert cutters. To order theinsert cutters, please refer to page 14.
Head Number of Cutting Width Number of CuttingDiameter Teeth per Tooth Effective Wings Width
5” 32 .500” 4 4”
5” 48 .500” 4 6”
5” 64 .500” 4 8”
5” 80 .500” 4 10”
5” 96 .500” 4 12”
5-1/2” 32 .500” 4 4”
5-1/2” 48 .500” 4 6”
5-1/2” 64 .500” 4 8”
5-1/2” 80 .500” 4 10”
5-1/2” 96 .500” 4 12”
6” 32 .500” 4 4”
6” 48 .500” 4 6”
6” 64 .500” 4 8”
6” 80 .500” 4 10”
6” 96 .500” 4 12”
6-1/2” 32 .500” 4 4”
6-1/2” 48 .500” 4 6”
6-1/2” 64 .500” 4 8”
6-1/2” 80 .500” 4 10”
6-1/2” 96 .500” 4 12”
8” 32 .500” 4 4”
8” 48 .500” 4 6”
8” 64 .500” 4 8”
8” 80 .500” 4 10”
8” 96 .500” 4 12”
Straight, Cone, or Sleeve Bore is available. Available in either 10° or 20° hook angle.
The Whisper Quiet II allows for the insertion of specialadjustable inserts to produce plow cuts as well as profiles.
This adds versatility to the Whisper Quiet Moulder Head line.
4 WING HEAD
USA 812.482.2000 • FAX 800.385.6049 • 800.634.8665 www.napgladu.com CANADA 450.460.4481 • FAX 888.660.2655 • 800.363.9117
© Copyright NAP Asset Holdings Ltd. 2013 All Rights Reserved Issue Date: 10/01/14 13
Whisper Quiet II Moulder Head
The Whisper Quiet Moulder Head is the equivalent to a six (6)knife head. It has 12 rows of staggered teeth. Please specify thehook angle when ordering. Standard hook angle is either 20° (softwood) or 10° (hard wood). The Whisper Quiet II has 4 dovetailslots milled into the head to receive the insert cutters. To order theinsert cutters, please refer to page 14.
The Whisper Quiet II allows for the insertion of specialadjustable inserts to produce plow cuts as well as profiles.
This adds versatility to the Whisper Quiet Moulder Head line.
Head Number of Cutting Width Number of CuttingDiameter Teeth per Tooth Effective Wings Width
5-1/2” 72 .330” 6 4”
5-1/2” 108 .330” 6 6”
5-1/2” 144 .330” 6 8”
5-1/2” 180 .330” 6 10”
5-1/2” 216 .330” 6 12”
6” 72 .330” 6 4”
6” 108 .330” 6 6”
6” 144 .330” 6 8”
6” 180 .330” 6 10”
6” 216 .330” 6 12”
6-1/2” 72 .330” 6 4”
6-1/2” 108 .330” 6 6”
6-1/2” 144 .330” 6 8”
6-1/2” 180 .330” 6 10”
6-1/2” 216 .330” 6 12”
8” 72 .330” 6 4”
8” 108 .330” 6 6”
8” 144 .330” 6 8”
8” 180 .330” 6 10”
8” 216 .330” 6 12”
Straight, Cone, or Sleeve Bore is available. Available in either 10° or 20° hook angle.
6 WING HEAD
USA 812.482.2000 • FAX 800.385.6049 • 800.634.8665 www.napgladu.com CANADA 450.460.4481 • FAX 888.660.2655 • 800.363.9117
© Copyright NAP Asset Holdings Ltd. 2013 All Rights Reserved Issue Date: 10/01/1414
Whisper Quiet II Insert Cutter
TO ADJUST: 1. Loosen allen screws “A”.2. Locate serrations of “B” into serrations of “C” as desired. (Adjusts up or down in .008”
increments per serration.)3. Locate insert cutters in moulder head slot.4. Tighten allen screws “A”.
NOTE: To be used with 4 WQII or 6 WQII (pages 12 or 13).
USA 812.482.2000 • FAX 800.385.6049 • 800.634.8665 www.napgladu.com CANADA 450.460.4481 • FAX 888.660.2655 • 800.363.9117
© Copyright NAP Asset Holdings Ltd. 2013 All Rights Reserved Issue Date: 10/01/14 15
Straight Cutter Heads
ADDITIONAL CHARGESDescription of Additional ChargeItems And Special Features
5/32” Thick Carbide
Bores Over 2.125 (2-1/8”)
Cone Bore
Face Shear Both Directions
Face Shear One Direction
Hubs and Trepans (up to 1 inch)
Hubs and Trepans (over 1 inch)
Keyways
Mounting Holes (qty. 1-6)
Mounting Holes (qty. 7+)
Set Screw Mounting
Shim Stock
Sleeve Bore
TC-4 (Tantung, Crobalt)
Top Bevel Both Directions
Top Bevel One Direction
Add Hydro Bore to Heads up to 5”
Add Hydro Bore to Heads >5”
Add Grease Fitting & Release to O.D.
NP552 - High Pressure Grease Gun
NP553 - High Pressure Hose
NP554 - Hydraulic Connector
NP555 - Grease Cartridge
NOTE: Any modifications not found on this page must be by special quotation only.
USA 812.482.2000 • FAX 800.385.6049 • 800.634.8665 www.napgladu.com CANADA 450.460.4481 • FAX 888.660.2655 • 800.363.9117
© Copyright NAP Asset Holdings Ltd. 2013 All Rights Reserved Issue Date: 10/01/1416
Straight Cutter Heads
APPLICATIONS• Used on shapers, moulders, tenon machines, etc.
TECHNICAL INFORMATION• Carbide grades selected for material being cut.• Standard tools have carbide ground flush on sides.• 15 degree hook is standard.
ADVANTAGES• Additional diameter, bores and kerfs available.• Economically priced.
Available in either 3, 4, or 6 wings. Carbide is flush ground to the steel body unless tip to body is required.
LC
25 DEGREE POSITIVEHOOK ANGLE
25 DEGREE POSITIVEHOOK ANGLE
15 degree hook angle is standard on all straight cutter heads.
NOTE: See page 17 for available cutting width diameters and wing information.
15 DEGREE POSITIVEHOOK ANGLE
USA 812.482.2000 • FAX 800.385.6049 • 800.634.8665 www.napgladu.com CANADA 450.460.4481 • FAX 888.660.2655 • 800.363.9117
© Copyright NAP Asset Holdings Ltd. 2013 All Rights Reserved Issue Date: 10/01/14 17
Straight Cutter Heads
3” DIAMETERCutting Width
Wings 1.00” 1.50” 2.00” 2.50” 3.00” 3.50” 4.00”
3
4
4” DIAMETERCutting Width
Wings 1.00” 1.50” 2.00” 2.50” 3.00” 3.50” 4.00”
3
4
6
5” DIAMETERCutting Width
Wings 1.00” 1.50” 2.00” 2.50” 3.00” 3.50” 4.00”
3
4
6
6” DIAMETERCutting Width
Wings 1.00” 1.50” 2.00” 2.50” 3.00” 3.50” 4.00”
3
4
6
8” DIAMETERCutting Width
Wings 1.00” 1.50” 2.00” 2.50” 3.00” 3.50” 4.00”
3
4
6
USA 812.482.2000 • FAX 800.385.6049 • 800.634.8665 www.napgladu.com CANADA 450.460.4481 • FAX 888.660.2655 • 800.363.9117
© Copyright NAP Asset Holdings Ltd. 2013 All Rights Reserved Issue Date: 10/01/1418
Mill-to-Pattern Profile Cutter Head
ADDITIONAL CHARGESDescription of Additional ChargeItems And Special Features
5/32” Thick Carbide
Bores Over 2.125 (2-1/8”)
Cone Bore
Dual Hook Angles In One Cutter Head
Face Shear Both Directions
Face Shear One Direction
Hubs and Trepans (up to 1 inch)
Hubs and Trepans (over 1 inch)
Keyways
Mounting Holes (qty. 1-6)
Mounting Holes (qty. 7+)
Set Screw Mounting
Shim Stock
Sleeve Bore
TC-4 (Tantung, Crobalt)
NP552 - High Pressure Grease Gun
NP553 - High Pressure Hose
NP554 - Hydraulic Connector
NP555 - Grease Cartridge
Plastic Checking Templates
Steel Checking Templates
Product Description Product Material
Grinding Template Plexiglas
Grinding Template Saw Steel
NOTE: Any modifications not found on this page must be by special quotation only.
USA 812.482.2000 • FAX 800.385.6049 • 800.634.8665 www.napgladu.com CANADA 450.460.4481 • FAX 888.660.2655 • 800.363.9117
© Copyright NAP Asset Holdings Ltd. 2013 All Rights Reserved Issue Date: 10/01/14 19
Mill-to-Pattern Profile Cutter Head
APPLICATIONS• Used on shapers, moulders, tenon machines, C.N.C. routers,
router tables, etc.
TECHNICAL INFORMATION• C.N.C. machined cutter bodies.• Computer generated profiles for accuracy.
ADVANTAGES• Tool diameter, wings, bore and pattern are all designed to fit
customer requirements.• Laser cut grinding template for accuracy and repeatability of
pattern.• Multi-piece units are available to maintain critical dimensions
of the profile.
WIDTH OF PATTERN
DIAMETER
DEPTH OFPATTERN
SMALLDIAMETER
LARGE CUTTERBODYWIDTH
Pictured is an example of the width and depth of the cut. Either the large or the small diameter
is required on all MTP orders.
When ordering a MTP tool, it is important to indicate the proper rotation of the tool. You must also indicate the top or bottom of the material. A sketch of the tool in a face coming position is also required. Please note if the
tool is conventional or climb cutting.
USA 812.482.2000 • FAX 800.385.6049 • 800.634.8665 www.napgladu.com CANADA 450.460.4481 • FAX 888.660.2655 • 800.363.9117
© Copyright NAP Asset Holdings Ltd. 2013 All Rights Reserved Issue Date: 10/01/1420
Mill-to-Pattern Profile Cutter Head
Body Width 2 Wing 3 Wing 4 Wing 6 Wing
.188 - 2.00
3” to 4” TOOL DIAMETER
Body Width 2 Wing 3 Wing 4 Wing 6 Wing 8 Wing
.188 - 3.00
4.1” to 5” TOOL DIAMETER
Body Width 2 Wing 3 Wing 4 Wing 6 Wing 8 Wing 10 Wing
.188 - 6.00
5.1” to 6.5” TOOL DIAMETER
Body Width 2 Wing 3 Wing 4 Wing 6 Wing 8 Wing 10 Wing
.188 - 6.00
6.51” to 7” TOOL DIAMETER
Body Width 2 Wing 3 Wing 4 Wing 6 Wing 8 Wing 10 Wing
.188 - 6.00
7.1” to 8” TOOL DIAMETER
Body Width 2 Wing 3 Wing 4 Wing 6 Wing 8 Wing 10 Wing
.188 - 6.00
8.1” to 9” TOOL DIAMETER
Body Width 2 Wing 3 Wing 4 Wing 6 Wing 8 Wing 10 Wing
.188 - 6.00
9.1” to 10” TOOL DIAMETER
Body Width 2 Wing 3 Wing 4 Wing 6 Wing 8 Wing 10 Wing
.188 - 6.00
10.1” to 12” TOOL DIAMETER
NOTE: Other Mill-To-Pattern Profile Head sizes are available by special quote only.
USA 812.482.2000 • FAX 800.385.6049 • 800.634.8665 www.napgladu.com CANADA 450.460.4481 • FAX 888.660.2655 • 800.363.9117
© Copyright NAP Asset Holdings Ltd. 2013 All Rights Reserved Issue Date: 10/01/14 21
Brazed Profile Router Bits
ADDITIONAL CHARGESDescription of Additional ChargeItems And Special Features
Alternating Shear
Bearing, Drilled and Tapped
Bits with Boring Point
Drill Ream and Set Screw
Face Shear in One Direction or ATB
Mill A Flat on Shank of Router Bit
Multi-Piece Units (2 or more pieces)
TC-4 (Tantung, Crobalt)
If the Overall Length of the Router Bit is:
3” or less in Overall Length No Additional Charge
3.1” to 4.5” in Overall Length
4.6” or Greater in Overall Length
If the Large Diameter of the Router Bit is:
3” Large Diameter or Less No Additional Charge
3.1” Large Diameter or More Quote
NOTE: Any modifications not found on this page must be by special quotation only.
USA 812.482.2000 • FAX 800.385.6049 • 800.634.8665 www.napgladu.com CANADA 450.460.4481 • FAX 888.660.2655 • 800.363.9117
© Copyright NAP Asset Holdings Ltd. 2013 All Rights Reserved Issue Date: 10/01/1422
Brazed Profile Router Bits
Body WidthPattern Depth 0.50 0.75 1.00 1.50 2.00 2.50 3.00 3.50 4.00
0.25 - 1.25
1 & 2 FLUTE ROUTER BITS
FLUTES
Body WidthPattern Depth 0.50 0.75 1.00 1.50 2.00 2.50 3.00 3.50 4.00
0.25 - 1.25
3 FLUTE ROUTER BITS
Body WidthPattern Depth 0.50 0.75 1.00 1.50 2.00 2.50 3.00 3.50 4.00
0.25 - 1.25
4 FLUTE ROUTER BITS
DIAMETER
Body Width 1 & 2 Flute 3 & 4 Flute 2+2 Flute
.188” - 4”
ROUTER BIT DIAMETER UP TO 3”
NOTE: Other Brazed Profile Router Bit sizes are available by special quote only.
USA 812.482.2000 • FAX 800.385.6049 • 800.634.8665 www.napgladu.com CANADA 450.460.4481 • FAX 888.660.2655 • 800.363.9117
© Copyright NAP Asset Holdings Ltd. 2013 All Rights Reserved Issue Date: 10/01/14
Coast to Coast Coverage
US OPERATIONSCORPORATE HEADQUARTERSINDIANA MANUFACTURING& SERVICE CENTER1180 Wernsing RoadJasper, IN 47546Phone: 812-482-2000 / 800-457-7468Fax: 800-457-7458
CALIFORNIA SERVICE CENTER1941 S. Baker AvenueOntario, CA 91761Phone: 909-930-5990Fax: 909-930-5996
GEORGIA SERVICE CENTER1257 D. Kennestone Circle N.E.Marietta, GA 30066Phone: 770-426-1100Fax: 770-426-1994
ILLINOIS SERVICE CENTER7955 Burden Rd.Machesney Park, IL 61115Phone: 815-877-7011Fax: 815-877-7013
NORTH CAROLINA SERVICE CENTER169 Crawford RoadStatesville, NC 28625Phone: 704-872-9571Fax: 704-872-9575
OHIO SERVICE CENTER411 Geneva AvenueTallmadge, OH 44278Phone: 330-633-0599Fax: 330-633-0791
PENNSYLVANIA SERVICE CENTER11 Keystone DriveLV Business ParkLebanon, PA 17042Phone: 717-273-9301Fax: 717-274-3764
TEXAS SERVICE CENTER4647 Leston Avenue #603Dallas, TX 75247Phone: 214-637-4849Fax: 214-637-5012
WISCONSIN SERVICE CENTER3211 Industrial StreetWisconsin Rapids, WI 54495Phone: 888-221-8665Fax: 715-424-1920
CANADIAN OPERATIONSMARIEVILLE MANUFACTURING& SERVICE CENTER2115 Saint-Cesaire StreetMarieville, Quebec J3M 1E5 CANADAPhone: 800-363-9117Fax: 450-460-2655
TORONTO SERVICE CENTER222 Evans Ave.Toronto, Ontario M8Z 1J8 CANADAPhone: 416-251-2236 / 888-251-2236Fax: 416-251-7268
SAINT - GEORGES SERVICE CENTER3020 95th StreetSaint - Georges, Quebec G6A 1E2 CANADAPhone: 888-270-2248Fax: 418-228-7503
ISO 9001:2008Registered (IN & WI)Issue Date: 10/01/14
Top Related