On
lin
e d
ata
sh
ee
t
C20S-120104A11, C20E-120304A11C2000 Standard
SAFETY LIGHT CURTAINS
ABCDEF
HIJKLMNOPQRST
C20S-120104A11, C20E-120304A11 | C2000 StandardSAFETY LIGHT CURTAINS
Ordering information
System part Type Part no.
Sender C20S-120104A11 1016596
Receiver C20E-120304A11 1016597
1.) Concerns installation as a replacement part for previous type 2 device in machine: Regarding Machinery Directive2006/42/EC, Article 1, Paragraph (2a) this type 2 device may only be used as a replacement part for identical PL d / SIL2devices within the EU if the machine was put into circulation before 2015-05-10. Keep this note with your machine documen-tation. If the machine is sold on, this note and the information it contains must be passed on to every subsequent buyer. 2.)Concerns installation on new machines: Due to the amendment to the EN/IEC 61496-1 standard, this type 2 device may onlybe installed on new machines up to PL c / SIL1 as of 2015-05-10.
Other models and accessories www.sick.com/C2000_Standard
Detailed technical data
Features
Resolution 40 mm
Protective field height 1,200 mm
Scanning range 0 m ... 6 m
Response time ≤ 34 ms
Synchronization Optical synchronisation
Safety-related parameters
Type Type 2 (IEC 61496-1)
Safety integrity level SIL1 (IEC 61508)SILCL1 (EN 62061)
Category Category 2 (EN ISO 13849)
Test rate (internal test) 13 /s (EN ISO 13849) 1)
Maximum demand rate ≤ 8 min⁻¹ (EN ISO 13849) 2)
Performance level PL c (EN ISO 13849)
PFHD (mean probability of a dangerous fail-ure per hour)
2.2 x 10-8 (EN ISO 13849)
TM (mission time) 20 years (EN ISO 13849)
Safe state in the event of a fault At least one OSSD is in the OFF state.
1) Internal test. The test rate may not be exceeded if an external test is performed.2) Between two requirements on a safety-related response of the device, at least 100 internal or external tests must be carried out.
Functions
Functions Delivery status
External device monitoring (EDM) ✔ Activated
Beam coding ✔ Uncoded
2 OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK Online data sheet | 2018-06-16 10:36:15
Subject to change without notice
C20S-120104A11, C20E-120304A11 | C2000 StandardSAFETY LIGHT CURTAINS
Interfaces
System connection
Connection type Male connector M12, 8-pin
Permitted cable length ≤ 15 m 1)
Conductor cross-section 0.25 mm²
Configuration method Hard wired
Display elements 7-segment display
Status display LEDs
Fieldbus, industrial network
Integration via Flexi Soft safety controller CANopen, DeviceNet™, EtherCAT®, EtherNet/IP™, Modbus TCP, PROFIBUS DP, PROFINET 2)
1) The length of the connecting cable is limited, because wire resistance max. 4 Ohm.2) For additional information on Flexi Soft -> www.sick.com/Flexi_Soft.
Electrical data
Sender Receiver
Protection class III (EN 50178)
Output signal switching devices (OSSDs)
Type of output 2 PNP semiconductors, short-circuit protect-ed, cross-circuit monitored 1)
ON state, switching voltage HIGH 24 V DC (VS – 2.25 V DC ... VS)
OFF state, switching voltage LOW ≤ 3.5 V DC
Current-carrying capacity per OSSD ≤ 500 mA
1) Applies to the voltage range between –30 V and +30 V.
Mechanical data
Housing cross-section 34 mm x 29 mm
Ambient data
Enclosure rating IP65 (EN 60529)
Ambient operating temperature 0 °C ... +55 °C
Storage temperature –25 °C ... +70 °C
Air humidity 15 % ... 95 %, Non-condensing
Vibration resistance 5 g, 10 Hz ... 55 Hz (IEC 68-2-6)
Shock resistance 10 g, 16 ms (EN 60068-2-29)
Other information
Wave length 950 nm
Classifications
ECl@ss 5.0 27272704
ECl@ss 5.1.4 27272704
ECl@ss 6.0 27272704
ECl@ss 6.2 27272704
ECl@ss 7.0 27272704
2018-06-16 10:36:15 | Online data sheet
Subject to change without notice
OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK 3
ABCDEF
HIJKLMNOPQRST
C20S-120104A11, C20E-120304A11 | C2000 StandardSAFETY LIGHT CURTAINS
ECl@ss 8.0 27272704
ECl@ss 8.1 27272704
ECl@ss 9.0 27272704
ETIM 5.0 EC002549
ETIM 6.0 EC002549
UNSPSC 16.0901 46171620
Dimensional drawing (Dimensions in mm (inch))
Protective field heights 150 mm to 1200 mm
14(0.55)
6(0.24)
2.2
(0.0
9) 10.5
(0.41)
1(0
.04
)
3.5
(0.1
4)
5
1
2
4
6
7
3
8(0.31)
9.6(0.38)
34(1.34)
19.3(0.76)
14.7(0.58)
L4
L3
L2
L5
8.4
(0.3
3)
36.4(1.43)
36(1.43)
34
.3(1
.35
)
62
(2
.44
)
51
.5 (2
.03
)
Ø 8.4(0.33)
2.3(0.09)
28.5(1.12)
L1
S1
L6
16.5(0.65)
43
.8(1
.72
)2
1(0
.83
)
Sender with swivel mount, small housing (receiver mirror image)① Mounting clamp② M8 hexagon screw, DIN 933 with DIN 9021 washer (not included with delivery)③ Center of light beam offset④ Adjustment⑤ Sliding nut groove for side mounting⑥ Protective field height⑦ Male connector M12, 8-pin
4 OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK Online data sheet | 2018-06-16 10:36:15
Subject to change without notice
C20S-120104A11, C20E-120304A11 | C2000 StandardSAFETY LIGHT CURTAINS
Connection diagramC2000 Standard to UE10-3OS safety relay
C2000S C2000R
Sel1
+24V
Sel2
EDM
OSSD1
OSSD2
GND
Shield
Sel1
+24V
Sel2
n.c.
Test
n.c.
GND
Shield
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
BN
GN
GY
BU
WH
BN
GN
GY
YE
PK
BU
WH
0 V
E117802/00/2014-06-18
+24 V DC
UE10-3OS
B1 Y1B3 13 23 33 411)
B2 Y2B4 14 24 34 42
Recommended accessoriesOther models and accessories www.sick.com/C2000_Standard
Brief description Type Part no.
Device protection (mechanical)
2 pieces, Snap-on front screen protection set (protects sensors from damage by flyingsparks and welding beads), mounting hardware included
Additional front screen 2022411
2018-06-16 10:36:15 | Online data sheet
Subject to change without notice
OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK 5
ABCDEF
HIJKLMNOPQRST
C20S-120104A11, C20E-120304A11 | C2000 StandardSAFETY LIGHT CURTAINS
Brief description Type Part no.
Terminal and alignment brackets
4 pieces, Mounting kit 6, side bracket, rotatable, Zinc diecast BEF-1SHABAZN4 2019506
4 pieces, Mounting kit 1, rotatable, swivel mount, Plastic BEF-2SMKEAKU4 2019649
Plug connectors and cables
Head A: female connector, M12, 8-pin, straightHead B: Flying leadsCable: PUR, halogen-free, shielded, 5 m
DOL-127SG05ME25KM0 6020354
Head A: female connector, M12, 8-pin, straightHead B: Flying leadsCable: PUR, halogen-free, shielded, 10 m
DOL-127SG10ME25KM0 6020352
Head A: female connector, M12, 8-pin, straightHead B: -Cable: unshielded
DOS-1208-G 6028422
Alignment aids
Laser alignment aid for various sensors, laser class 2 (IEC 60825). Do not look intothe beam!
AR60 1015741
Adapter AR60 for housing cross-section 34 mm x 29 mm AR60 adapter, 34x29 4032462
Adapter AR60 for housing cross-section 34 mm x 29 mm in PU3H device column AR60 adapter,34x29, PU3H
4056730
Test and monitoring tools
40 mm diameter Test rod 40 mm 2022604
6 OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK Online data sheet | 2018-06-16 10:36:15
Subject to change without notice
Onlin
e da
ta s
heet
SICK AG | Waldkirch | Germany | www.sick.com
SICK At A GlAnCeSICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applica-tions. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment.
We have extensive experience in a wide range of industries and understand their processes and require-ments. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner.
Comprehensive services complete our offering: SICK lifetime Services provide support throughout the ma-chine life cycle and ensure safety and productivity.
For us, that is “Sensor Intelligence.”
WOrldWIde preSenCe:Contacts and other locations – www.sick.com
Top Related