Blind Rivets and Riveting Tools
1
Table of Contents
BULB-TITE® Rivets ............................................... 2-4
MEGA GRIP® Rivets ............................................. 5
Extra Length Metric Rivets.................................. 6
PolyGrip® Blind Rivets......................................... 7
Standard Blind Rivets.......................................... 8-9
GESIPA Portable / Power Installation Tools........ 10
GESIPA Installation Tools for BULB-TITE® Rivets ............................................ 11
Accessory Tools.................................................... 12
Riveting Tool Installation Guide......................... 13
Tools and Accessories Selection Guide ............. 14
Warranty ............................................................... 15
Head StylesDome HeadThe Dome Head blind rivet is themost widely available and com-monly used head style. The domehead flange offers good bearing surface and is suitable for many applications.
Large FlangeThe Large Flange blind rivet offers alarger bearing surface than theDome Head and is suited for joiningthin, compressible or brittle materi-als to structural members, i.e.wood/steel, plastic/steel.
Countersunk Head The Countersunk Head blind rivetis used in applications requiring aflush surface.
Material CompatibilityThe blind rivet selected should be compatible withthe materials being joined. Dissimilar materialscan cause failure due to galvanic corrosion.
SFS intec advises the use of corrosion resistantrivets made of aluminum or stainless steel. Steelrivets are available for interior applications orwhere conditions will not cause corrosion. ContactSFS intec if assistance is required.
Strength RequirementsThe joint strength required will determine the diameter and spacing of the blind rivets.
Material ThicknessEach blind rivet is engineered for a specific rangeof material thickness for which it will be effective.This range of material or work thickness is theblind rivet’s “grip range”.
Hole SizeProper hole size is important to ensure the in-tegrity of the fastened joint. The recommendedhole size and tolerances are shown in the technical data charts.
EPDM washer (optional)
BULB-TITE® Rivets
BULB-TITE rivets were first developed to solve application requirements in the Pre-Engineered Metal Building industry. Since that time, the BULB-TITE product line has been expanded to meet application requirements in a widerange of industries. The BULB-TITE rivet body folds into three separate legs forming a large blind-side head. Thislarge bearing head evenly distributes the BULB-TITE’s clamp force in soft, thin or brittle materials while providinghigh pull-through resistance. The wide grip range enables a single rivet to work in a greater variation of thicknesses.Special installation tool nosepieces are required for proper installation performance. See chart on page 13.
RV6605 – Large Flange Head (Protruding Crown)RV6603 & RV6604 – Dome Head (ProtrudingCrown)
EPDM washer (optional)EPDM washer (optional)
2
A - Head Diameter B - Body Height D - Body Diameter F - Blind Side Protrusion L - Rivet Body Length
RV6601 – Countersunk Head (82˙)RV6606 – Dome Head (Recessed Crown)
Head Style
Rivet DiaNom.
SFS intecCode
GripRange(Inches)
SFS intecPart
Number
Hole Size(Inches)Drill No. D
Max.B
Max.A L
Max.F
Ref.
Typ. Strength (lbs.)
Shear Tensile
Aluminum Rivet/Aluminum MandrelDimensions (Inches)
LargeFlangeProt. Crown
9/32” RV6605-9-6RV6605-9-6WRV6605-9-10RV6605-9-10WRV6605-9-12RV6605-9-12W
.042-.375
.042-.375
.250-.625
.250-.625
.375-.750
.375-.750
119472411947251194726119472711947281194730
.308-.3275/16
.304 .210 .720-.765 1.1101.1101.3601.3601.4851.485
1.3251.3251.5751.5751.7001.700
1500 1100
R V66 0 4 - 6 - 8 WBULB-TITE
Rivet Material0 - Aluminum
Washer for Weather ResistanceMaximum Grip (in 1/16”)Nominal Diameter (in 1/32”)Head Style 1 - Countersunk 3 & 4 - Dome (Protruding Crown) 5 - Large Flange 6 - Low Profile (Recessed Crown)
3
Head Style
CountersunkHeadRecessedCrown
Rivet DiaNom.3/16”
1/4”
SFS intecCode
RV6601-6-4RV6601-6-6RV6601-6-8RV6601-6-10RV6601-6-12
RV6601-8-4RV6601-8-6RV6601-8-8
GripRange(Inches).106-.250.187-.375.312-.500.437-.625.563-.750
.150-.250
.187-.375
.250-.500
SFS intecPart
Number12426431242644123066512426451242647
124264812426501242651
Hole Size(Inches)Drill No..209-.221
#4
.250-.2631/4”
DMax..205
.246
BMax..108w/
crown
.164
A
.340Min.
.452Min.
LMax..770.8951.0201.1451.270
.815
.9401.065
FRef..9351.0601.1851.3101.435
1.0051.1301.255
Typ. Strength (lbs.)Shear Tensile
675 450
900 550
Aluminum Rivet/Aluminum MandrelDimensions (Inches)
R V66 0 4 - 6 - 8 WBULB-TITE
Rivet Material0 - Aluminum
Washer for Weather ResistanceMaximum Grip (in 1/16”)Nominal Diameter (in 1/32”)Head Style 1 - Countersunk 3 & 4 - Dome (Protruding Crown) 5 - Large Flange 6 - Low Profile (Recessed Crown)
BULB-TITE® Rivets (continued)
Dome HeadProtrudingCrown
5/32”
3/16”
1/4”
9/32”
RV6604-5-4RV6604-5-4WRV6604-5-8RV6604-5-8W
RV6604-6-3RV6604-6-3WRV6604-6-4RV6604-6-4WRV6604-6-6RV6604-6-6WRV6604-6-8RV6604-6-8WRV6604-6-10RV6604-6-10WRV6604-6-12RV6604-6-12WRV6604-6-14RV6604-6-14WRV6604-6-16RV6604-6-16WRV6604-6-18RV6604-18W
RV6604-8-4RV6604-8-4WRV6604-8-6RV6604-8-6WRV6604-8-8RV6604-8-8WRV6604-8-10RV6604-8-10W
RV6603-9-6RV6603-9-6WRV6603-9-10RV6603-9-10WRV6603-9-12RV6603-9-12W
.067-.250
.067-.250
.250-.500
.250-.500
.050-.187
.050-.187
.062-.250
.062-.250
.187-.375
.187-.375
.312-.500
.312-.500
.437-.625
.437-.625
.563-.750
.563-.750
.687-.875
.687-.875.812-1.000.812-1.000.937-1.125.937-1.125
.062-.250
.062-.250
.125-.375
.125-.375
.250-.500
.250-.500
.375-.625
.375-.625
.032-.375
.032-.375
.250-.625
.250-.625
.375-.750
.375-.750
1194602119460311946041194605
119460611946071194608119460911946201194621119462211946231194624119462511946261194627124265212426531242654124265512426561242657
11946281194629119463011946311194632119463311946341194635
119471811947191194720119472111947221194723
.162-.167#20
.209-.221#4
.250-.2631/4
.304-.31255/16
.161
.205
.246
.304
.100
.125
.150
.190
.335-.350
.430-.455
.555-.565
.610-.620
.805
.805
.992
.992
.707
.707
.770
.770
.895
.8951.0201.0201.1451.1451.2701.2701.3751.3751.5001.5001.6251.625
.815
.815
.940
.9401.0651.0651.1901.190
1.1101.1101.3601.3601.4851.485
.925
.9251.1121.112
.844
.844
.907
.9071.0321.0321.1571.1571.2821.2821.4071.4071.5321.5321.6571.6571.7821.782
1.0051.0051.1301.1301.2551.2551.3601.360
1.3251.3251.5751.5751.7001.700
350 225
675 450
950 575
1500 1100
4
BULB-TITE® Rivets (continued)
Head Style
Rivet DiaNom.
SFS intecCode
GripRange(Inches)
SFS intecPart
Number
Hole Size(Inches)Drill No. D
Max.B
Max.A L
Max.F
Ref.
Typ. Strength (lbs.)
Shear Tensile
Aluminum Rivet/Aluminum MandrelDimensions (Inches)
DomeHeadRecesssedCrown
3/16”
1/4”
RV6606-6-3RV6606-6-3WRV6606-6-4RV6606-6-4WRV6606-6-6RV6606-6-6WRV6606-6-8RV6606-6-8WRV6606-6-10RV6606-6-10WRV6606-6-12RV6606-6-12WRV6606-6-14RV6606-6-14WRV6606-6-16RV6606-6-16WRV6606-6-18RV6606-6-18W
RV6606-8-4RV6606-8-4WRV6606-8-6RV6606-8-6WRV6606-8-8RV6606-8-8WRV6606-8-10RV6606-8-10W
.050-.187
.050-.187
.062-.250
.062-.250
.187-.375
.187-.375
.312-.500
.312-.500
.437-.625
.437-.625
.563-.750
.563-.750
.687-.875
.687-.875.812-1.000.812-1.000.937-1.125.937-1.125
.040-.250
.040-.250
.125-.375
.125-.375
.250-.500
.250-.500
.375-.625
.375-.625
124266812426691242670124268012426921242693124269412426951242697124269812427331242735124276712427681242770124277112427731242774
12427811242792124279512427961242839124284112428681242870
.209-.221#4
.250-.2631/4
.205
.246
.099
.116
.446-.492
.535-.550
.707
.707
.770
.770
.895
.8951.0201.0201.1451.1451.2701.2701.3751.3751.5001.5001.6251.625
.815
.815
.940
.9401.0651.0651.1901.190
.844
.844
.907
.9071.0321.0321.1571.1571.2821.2821.4071.4071.5321.5321.6571.6571.7821.782
1.0051.0051.1301.1301.2551.2551.3801.380
675 450
950 575
R V66 0 4 - 6 - 8 WBULB-TITE
Rivet Material0 - Aluminum
Washer for Weather ResistanceMaximum Grip (in 1/16”)Nominal Diameter (in 1/32”)Head Style 1 - Countersunk 3 & 4 - Dome (Protruding Crown) 5 - Large Flange 6 - Low Profile (Recessed Crown)
5
RV6 9 0 0 - 8 - 10 XG
Head Style1-Countersunk5-Large Flange
9-Dome
Rivet Material0-Aluminum Mandrel Material
0-Aluminum
Special Feature XG-Extended GripMaximum Grip (in 1/16”)Nominal Diameter (in 1/32”)
Aluminum Rivet/Aluminum Mandrel
The MEGA GRIP is a high strength structural blind rivet offering several advantages over conventional blind rivets. MEGA GRIP’s wide grip range enables a single MEGA GRIP to replace up to five different lengths of standard rivets. High shear strength is achieved by MEGA GRIP’s flush break self plugging mandrel. MEGA GRIPrivets are hole-filling, resulting in tighter joints and improved sealing for weather resistance. MEGA GRIP rivets areinstalled via standard rivet tools and do not require special nose tips. Steel/Steel MEGA GRIP rivets available upon special request.
Note: Above values are shown as a guide only and may vary depending upon applications. Shear and tensile strength tests were conducted in hard-ened alloy steel with a thickness equal to the fastener diameter. Strength values measured in nominal grip.
Head Style
Dome
Counter-sunk
LargeFlange
Rivet DiaNom.3/16”
1/4”
3/16”
1/4”
3/16”
1/4”
SFS intecCode
RV6900-6-4RV6900-6-7XG
RV6900-8-6RV6900-8-10XG
RV6100-6-5RV6100-6-8
RV6100-8-7RV6100-8-10XG
RV6500-6-4RV6500-6-7XG
RV6500-8-6RV6500-8-10XG
GripRange(Inches).062-.250.062-.437
.080-.375
.080-.625
.125-.312
.275-.500
.125-.437
.125-.625
.062-.250
.062-.437
.080-.375
.080-.625
SFS intecPart
Number11945601194561
11945621194567
12426241216216
12426251242626
12426311242642
12426281242630
Hole Size(Inches)Drill No..194-.204
#8
.259-.272G
.194-.204#8
.259-.272G
.194-.204#8
.259-.272G
D
.185-.188
.253-.257
.185-.188
.253-.257
.185-.188
.253-.257
BMax..088
.108
.075Ref
.095Ref
.085
.112
A
.353-.373
.480-.500
.321-.338
.424-.441
.490-.510
.749-.761
LMax..405.562
.560
.775
.477
.597
.633
.790
.405
.562
.564
.765
FRef..7551.035
1.0251.355
.9221.042
1.0781.380
.7551.035
.9531.145
Typ. Strength (lbs.)
Shear Tensile MandrelPushout
750 540 75
1300 875 150
750 540 75
1300 875 150
750 540 75
1300 875 150
Dimensions (Inches)
MEGA GRIP® Rivets
D
L
F mAx
B
A
D
L
F mAx
B
A
Dome Countersunk
6
Extra Length Metric Rivets
Aluminum Rivet/Steel Mandrel
SFS intec supplies a complete line of metric blind rivets according to DIN7337 standards in 3mm, 4mm and 5mm diameters. Standard material is Aluminum/Steel. Steel/Steel and Stainless Steel 304 and 316 alloys are available uponspecial request. All dimensions for Metric Series are given in millimeters. Additional diameters of 4.8mm, 6mm and6.4mm available on special request.
A T O D 30 180Rivet Material
Mandrel MaterialType
Rivet Length Under Flange (18.0mm) Rivet Diameter (3.0mm)Head Style
Material:A = AluminumT = Steel
Head Style:D = Dome
Type:O = Open
Head Style
Dome
Rivet DiaNom.3mm
4mm
5mm
SFS intecCode
ATO-D-30180ATO-D-30200ATO-D-30250ATO-D-30300
ATO-D-40180ATO-D-40210ATO-D-40250ATO-D-40310ATO-D-40350ATO-D-40400
ATO-D-50350ATO-D-50400ATO-D-50450ATO-D-50500ATO-D-50550ATO-D-50600ATO-D-50650ATO-D-50700ATO-D-50800
GripRange(mm)13-1515-1717-2222-25
12.5-14.514.5-16.516.5-21.521.5-2626-3030-35
25-3030-3535-4040-4545-4848-5252-5757-6262-72
SFS intecPart
Number1194509119453111945321194534
119453511945361194537119453811945391194540
119454111945421194543119454411945451194546119454711945491194550
Hole Size(mm)
Drill No.3.1
4.1
5.1
D
2.9-3.08
3.85-4.08
4.85-5.08
BMax.1.2
1.5
1.6
A
5.8-6.5
7.0-8.0
8.5-9.5
LMax.18.820.825.830.8
19.021.026.031.036.041.0
36.041.046.051.056.061.066.071.081.0
Min. Strength (lbs.)Shear Tensile
160 200
190 225
450 630
Dimensions (Inches)
7
PolyGrip® Blind Rivets
Stainless Rivet/Stainless Mandrel
D
L
B
A
PolyGrip rivets feature a wide grip range, enabling a single PolyGrip to replace up to three different lengths of standard blind rivets. PolyGrip rivets expand radially, filling the application hole, resulting in tighter joints andimproved sealing. The PolyGrip’s locked mandrel core creates a weather resistant fastener. Improved material support is provided by the PolyGrip’s larger blindside head formation. Large flange head style and Aluminim/Steel and Steel/Steel rivets are available upon request.
Aluminum Rivet/Stainless Mandrel
S S P D 32 085Rivet Material
Mandrel MaterialType
Rivet Length Under Flange (8.5mm) Rivet Diameter (3.2mm)Head Style
Material:A = AluminumS = Stainless
Head Style:D = Dome
Type:P = Polygrip
Head Style
Dome
Rivet DiaNom.1/8”
5/32”
3/16”
SFS intecCode
ASP-D-32085ASP-D-32100ASP-D-32120
ASP-D-40110ASP-D-40140ASP-D-40180
ASP-D-48110ASP-D-48160ASP-D-48180ASP-D-48260ASP-D-48310
GripRange(Inches).039-.197.059-.256.118-.315
.039-.256
.138-.375
.276-.512
.039-.256
.177-.433
.256-.512
.433-.768
.630-.945
SFS intecPart
Number119458511945861194587
119458911946101194611
11946121194613119461411946151194616
Hole Size(Inches)Drill No..130-.136#30
.161-.166#20
.193-.199#10
D
.122-.129
.151-.160
.183-.192
BMax..043
.051
.063
A
.228-.256
.276-.315
.335-.374
LMax..346.406.465
.433
.551
.709
.433
.630
.7091.0241.220
Min. Strength (lbs.)
Shear Tensile
162 236
238 377
359 510
Dimensions (Inches)
Head Style
Dome
Rivet DiaNom.1/8”
5/32”
3/16”
SFS intecCode
SSP-D-32085SSP-D-32100SSP-D-32120
SSP-D-40110SSP-D-40140SSP-D-40180
SSP-D-48110SSP-D-48160SSP-D-48180
GripRange(Inches).020-.192.059-.256.118-.315
.020-.256
.139-.354
.276-.472
.039-.236
.197-.394
.315-.472
SFS intecPart
Number119455311945551194558
119455911945801194581
119458211945831194584
Hole Size(Inches)Drill No..128-.133#30
.161-.166#20
.193-.199#10
D
.122-.129
.151-.160
.183-.192
BMax..051
.051
.052
A
.228-.256
.276-.315
.370-.374
LMax..346.406.465
.433
.551
.709
.433
.630
.709
Min. Strength (lbs.)
Shear Tensile
326 517
595 809
899 1124
Dimensions (Inches)US
Dimen.41-4342-4443-45
51-5453-5555-57
61-6463-6665-68
USDimen.41-4342-4443-45
51-5453-5655-58
62-6463-6766-6869-612612-615
8
Standard Blind Rivet
Standard blind rivets are ideally suited for metal trim applications and other light gauge installations.SFS intec provides a selection of 1/8” x 3/16” Stainless/Stainless rivets painted to match standard industry colors.Other sizes and colors available upon request.
D
L
B
A
Stainless Rivet/Stainless Mandrel
Head Style
Dome
Rivet DiaNom.1/8”
5/32”
3/16”
SFS intecCode
SSO-D-32070SSO-D-32086SSO-D-32102SSO-D-31134SSO-D-32165
SSO-D-40076SSO-D-40108SSO-D-40140
SSO-D-48083SSO-D-48114SSO-D-48146SSO-D-48178
GripRange(Inches).063-.125.126-.187.188-.250.251-.375.376-.500
.020-.125
.126-.250
.251-.375
.020-.125
.126-.250
.251-.375
.375-.500
SFS intecPart
NumberL1280L1290L1300L13201243078
124307912430931242613
L1485124309812431001243104
Hole Size(Inches)Drill No..129-.133#30
.160-.164#20
.192-.196#11
D
.122-.128
.153-.159
.183-.191
BMax..040
.050
.060
A
.238-.262
.296-.328
.356-.394
LMax..275.337.400.525.650
.300
.425
.550
.325
.450
.575
.700
Min. Strength (lbs.)Shear Tensile
420 530
650 820
950 1200
Dimensions (Inches)
A A O D 32 070Rivet Material
Mandrel MaterialType, Open
Head Style, Dome
Rivet Length Under Flange (7.0mm) Rivet Diameter (3.2mm)
Material:A = AluminumS = StainlessT = Steel
Head Style:D = DomeC = Countersunk
Type:O = Open
USDimen.424344 4648
525456
62646668
SFS intec Standard Color Painted RivetsSFS PART DESCRIPTION
L1290-001 STST43D RIVET WHITEL1290-012 STST43D RIVET BLUEL1290-014 STST43D RIVET BRIGHT WHITEL1290-020 STST43D RIVET TANL1290-040 STST43D RIVET GOLDL1290-042 STST43D RIVET BURNISHED SLATEL1290-047 STST43D RIVET GREENL1290-051 STST43D RIVET CHARCOAL GRAYL1290-109 STST43D RIVET SAND BEIGEL1290-110 STST43D RIVET BROWNL1290-232 STST43D RIVET EVERGREENL1290-248 STST43D RIVET LIGHT STONEL1290-578 STST43D RIVET OLD TOWN GRAYL1290-850 STST43D RIVET ASH GRAYL1290-890 STST43D RIVET RED
Dome Countersunk
9
120 150
190 230
260 320
120 150
190 230
260 320
Standard Blind Rivet
D
L
B
A
Aluminum Rivet/Aluminum Mandrel
Head Style
Rivet DiaNom.
SFS intecCode
GripRange(Inches)
SFS intecPart
Number
Hole Size(Inches)Drill No.
D BMax.
A LMax.
Min. Strength (lbs.)
Shear Tensile
Dimensions (Inches)
A A O D 32 070Rivet Material
Mandrel MaterialType, Open
Head Style, Dome
Rivet Length Under Flange (7.0mm) Rivet Diameter (3.2mm)
Material:A = AluminumS = StainlessT = Steel
Head Style:D = DomeC = Countersunk
Type:O = Open
USDimen.
Steel Rivet/Steel Mandrel
Head Style
Dome
Rivet DiaNom.1/8”
SFS intecCode
TTO-D-32070TTO-D-32086TTO-D-32102
GripRange(Inches).063-.125.126-.187.188-.250
SFS intecPart
NumberL0100L0120L0140
Hole Size(Inches)Drill No..129-.133#30
D
.122-.128
BMax..040
A
.238-.262
LMax..275.337.400
Min. Strength (lbs.)Shear Tensile
260 310
Dimensions (Inches)US
Dimen.424344
Other sizes available upon request.
Dome Countersunk
Dome
Countersunk
1/8”
5/32”
3/16”
1/8”
5/32”
3/16”
AAO-D-32070AAO-D-32086AAO-D-32102AAO-D-32133AAO-D-32165
AAO-D-40076AAO-D-40108AAO-D-40144AAO-D-40171
AAO-D-48083AAO-D-48114AAO-D-48146AAO-D-48178AAO-D-48210AAO-D-48241AAO-D-48273AAO-D-48305
AAO-S-32070AAO-S-32086AAO-S-32102AAO-S-32117
AAO-S-40108AAO-S-40140
AAO-S-48114
.063-.125
.126-.187
.188-.250
.313-.375
.376-.500
.020-.125
.188-.250
.251-.375
.376-.500
.020-.125
.126-.250
.251-.375
.376-.500
.501-.625
.626-.750
.751-.875
.876-1.00
.092-.125
.126-.187
.188-.250
.251-.312
.188-.250
.251-.375
.188-.250
L0500L0520L054012429221242926
L0620L066012429291242934
12429351242937L076012429391242940124294112429431242944
1242950124295112429521242953
12429541242955
1242956
.129-.133#30
.160-.164#20
.192-.196#11
.129-.133#30
.160-.164#20
.192-.196#11
.122-.128
.153-.159
.183-.191
.122-.128
.153-.159
.183-.191
.040
.050
.060
.031
.040
.050
.238-.262
.296-.328
.356-.394
.207-.233
.268-.294
.355-.361
.275
.337
.400
.525
.650
.300
.425
.550
.675
.325
.450
.575
.700
.825
.9501.0751.200
.275
.337
.400
.462
.425
.550
.450
424344 4648
52545658
62646668610612614616
42434445
5456
64
10
GESIPA® Portable/Battery Power Installation Tools
AccuBird 14.4 VOLT CORDLESS RIVETING TOOLWORK CAPACITY: See chart on page 13WEIGHT: 4.8 lbs. (2.2 kg)WORKING STROKE: .79" (20 mm)TRACTION POWER: 1,900 lbs. (8,500 N)POWER PACK: 14.4 Volt, rechargeable Li-Ion / 1.3 AhBATTERY CHARGER: 110V/60Hz, 60 minute charge time
The AccuBird and PowerBird provide power and performance on par with the best air/hydraulic rivet tools,while offering the freedom of battery powered portability. Each tool comes in a rugged steel carrying caseand includes a 12 volt battery and 110V/50Hz battery charger. Built into each tool are the nose tips along with a tip removal wrench that enables quick changeover to setup the tool for 4 diameters of blind rivets.
PowerBird 14.4 VOLT CORDLESS RIVETING TOOL
WORK CAPACITY: See chart on page 13WEIGHT: 4.8 lbs. (2.2 kg)WORKING STROKE: .79" (20 mm)TRACTION POWER: 2,900 lbs. (13,000 N)POWER PACK: 14.4 Volt, rechargeable Li-Ion / 2.6 AhBATTERY CHARGER: 110V/60Hz, 60 minute charge time
Designed for use with Aluminum BULB-TITE rivets, the tool greatly simplifies rivet removal in repair operations. The specially groundjaws cut rivet heads off cleanly without damage to the applicationmaterial.
RV 24REBULB-TITE REMOVAL TOOL
ACCESSORY TOOL
11
WORK CAPACITY: 5/32”, 3/16”, 1/4” & 9/32” BULB-TITE rivets.**Requires appropriate sized RV8840 series BULB-TITE pulling head
WEIGHT: 6.5 lbs. w/pulling head attachedLENGTH: 14” w/o pulling head, 18” w/pulling head attachedTRACTION POWER: 3,000 lbs.WORKING STROKE: Continuous reciprocating .375” per cycleFEATURES:• The RV74G is the newest refinement in GESIPA Electric Pow-
ered BULB-TITE installation tool that is designed for MetalBuilding Construction applications. This tool is suited tosidewall panel applications. Attaching the optional 74-EXT extension adapts the RV74G for installing BULB-TITES in roofing applications from a standing position.
WEIGHT: 1.5 lbs.LENGTH: 12 13/16” (Extends tool by 12”)
FEATURES:• Attachment of the 74-EXT extension unit
adapts the RV74G tool for roofing applica-tions. This ergonomic feature enables BULB-TITE rivet installation while standing.
RV 74GELECTRIC (AC) POWERED BULB-TITE TOOL
RV 74-EXTPULLING HEAD EXTENSION UNIT
BULB-TITE Pulling HeadsRV8840-X (-5,6,8,9 DIAMETER BULB-TITE RIVETS)
RV 74G with 74-EXT & RV8840 attachedWEIGHT: 8 lbs.LENGTH: 30”
WEIGHT: 0.5 lbs.LENGTH: 6 1/16”FEATURES:• RV8840 series pulling heads are designed for use with
6603, 6604, and 6605 series BULB-TITE rivets whichfeature multi-grip type mandrels
• These heads are equipped with jaws and tips for spe-cific diameter BULB-TITE rivets. The special BULB-TITE crown-swaging nose tip pivots to align the tip onto theBULB-TITE rivet’s head crown for improved bore sealing of installed rivets.
Specify the BULB-TITE rivet diameter when ordering
GESIPA® Installation Tools ForBULB-TITE® Rivets
12
GESIPA® Power Installation Tools
WORK CAPACITY: Up to1/4" ø structural blindrivets and 9/32” AlumBT
WEIGHT: 4.4 lbs.PULLING STRENGTH:
5,500 lbs. @ 90 psiWORKING STROKE:
.750 in.FEATURES:• Taurus 4 offers the
high pulling force required for many oftoday’s 1/4” diameterstructural blind rivets
Taurus 4HYDRO-PNEUMATIC POWER RIVETING TOOL
Taurus 2HYDRO-PNEUMATIC POWER RIVETING TOOL
Taurus 3HYDRO-PNEUMATIC POWER RIVETING TOOL
WORK CAPACITY: Up to 3/16" ø in all materials
WEIGHT: 3.75 lbs.PULLING STRENGTH:
2,500 lbs. @ 90 psiWORKING STROKE:
.709 in.FEATURES:• New 3-piece jaw
design increases jawlife — reducing service costs
• Integrated mandrelcollection system with grip release shutoff — conserves compressed air resources
• Padded ergonomic tool grip enhances comfort — lowers operator fatigue
WORK CAPACITY:1/8" ø in all materials
WEIGHT: 2.87 lbs.PULLING STRENGTH:
1,150 lbs. @ 90 psiWORKING STROKE:
.590 in.FEATURES:• Nose tips for each
rivet diameter arestored in tool’s base
• Same hydraulic sec-tion as the Taurus 2 ensures long tool life and re-duced maintenance
• Suspension loop retracts into tool body
FEATURES:• Taurus 3 is up to 40%
lighter than comparable tools inthis power range
• Long working strokeinstalls multi-grip rivets in a single stroke
• Reliable exhaust-air mandrel ejection with large collector and safety interlock
WORK CAPACITY: Up to1/4" ø in all materialsand 9/32” Alum BT
WEIGHT: 4.19 lbs.PULLING STRENGTH:
3,900 lbs. @ 90 psiWORKING STROKE:
.984 in.
Taurus 1HYDRO-PNEUMATIC POWER RIVETING TOOL
13
Tools and Accessories InformationRiveting Tool Installation Guide
Rivet Type
BULB-TITE
MEGA-GRIP
Extra-Length Metric
PolyGrip
Standard Blind
Material
Alum/Alum
Alum/Alum
Alum/Steel
Stainless/Stainless
Alum/Stainless
Alum/Alum
Steel/Steel
Stainless/Stainless
AccuBirdNose Tip
• 1195158• 1195159• 1195160
• Kit• Kit
• Kit • Kit• Kit
• Kit• Kit• Kit• Kit• Kit• Kit
• Kit• Kit• Kit• Kit• Kit• Kit• Kit• Kit• Kit
RivetDiameter
5/32”3/16”1/4”9/32”
3/16”1/4”
3mm4mm5mm
1/8”5/32”3/16”1/8”5/32”3/16”
1/8”5/32”3/16”1/8”5/32”3/16”1/8”5/32”3/16”
PowerBirdNose Tip
• 1195158• 1195159• 1195160• 1195161
• Kit• Kit
• Kit• Kit• Kit
• A• Kit• Kit• Kit• Kit• Kit
• A• Kit• Kit• A• Kit• Kit• Kit• Kit• Kit
RV 74GPulling Head
• 1195150• 1195151• 1195152• 1195153
Key • = Tool will install rivetKit = Nose tip included in tool kitA = Nose tip 7251583 and jaw pusher/reducer tube 7243294 required
Taurus 1Nose Tip
• Kit • Kit
• Kit
• Kit• Kit
• Kit• Kit
• Kit
• Kit
Taurus 2Nose Tip
• 1195158• 1195159
• Kit
• Kit• Kit
• Kit• Kit• Kit• Kit• Kit
• Kit• Kit
• Kit• Kit
• Kit• Kit
Taurus 3Nose Tip
• 1195158• 1195159• 1195160• 1195161
• Kit• Kit
• Kit• Kit
• Kit• Kit• Kit• Kit• Kit
• Kit• Kit
• Kit• Kit
• Kit• Kit
Taurus 4Nose Tip
• 1195159• 1195160• 1195161
• Kit• Kit
• Kit• Kit
• Kit• Kit• Kit• Kit• Kit
• Kit• Kit
• Kit• Kit
• Kit• Kit
Tool and Accessory Selection Guide
14
AC Electric Power Tools
Battery Power Tools
Pneumatic HydraulicPower Tools
Pneumatic HydraulicPower Tools
Accessory Tools
SFS intecItem Number
119514911951501195151119515211951531195154
0836102083555812228731222872119594408807541195155119515611951571195158119515911951601195161
11676501195689119569011230321246875
124704912470561274057124705812470591195158119515911951601195161
1195162
Description
RV 74G Electric (110V) BULB-TITE Rivet ToolRV8840-5 BULB-TITE Pulling Head - 5/32” Dia.RV8840-6 BULB-TITE Pulling Head - 3/16” Dia.RV8840-8 BULB-TITE Pulling Head - 1/4” Dia.RV8840-9 BULB-TITE Pulling Head - 9/32” Dia.RV 74-EXT Pulling Head Extension Unit
AccuBird (14V) Portable Rivet Tool KitPowerBird (14V) Portable Rivet Tool Kit14.4 Volt 1.3 Ah Li-Ion Battery14.4 Volt 2.6 Ah Li-Ion BatteryCharger (100V/60Hz) for 14.4 V Li-Ion12 Volt NiMH 3.2 Ah Battery12 Volt Battery Charger for NiMHBulb-tite Jaws (A/B & P/B tools)Bulb-tite Jaw Pusher - P/B ToolBulb-tite Nose Tip for 5/32” Dia.Bulb-tite Nose Tip for 3/16” Dia.Bulb-tite Nose Tip for 1/4” Dia.Bulb-tite Nose Tip for 9/32” Dia.
Taurus 1 Pneu/Hydra Rivet ToolTaurus 2 Pneu/Hydra Rivet ToolTaurus 3 Pneu/Hydra Rivet ToolTaurus 4 Pneu/Hydra Rivet ToolTaurus 1 Head Extension - 50mm
Taurus 1 Head Extension - 100mmTaurus 2 Head Extension - 50mmTaurus 2 Head Extension - 100mmTaurus 3 Head Extension - 50mmTaurus 3 & 4 Head Extension - 100mmBULB-TITE nose tip for 5/32” dia.BULB-TITE nose tip for 3/16” dia.BULB-TITE nose tip for 1/4” dia.BULB-TITE nose tip for 9/32” dia.
RV 24RE Aluminum BULB-TITE Removal Tool
Tools and Accessories Information (continued)
15
WARRANTIESRIVETSSFS intec, Inc. warrants that its rivet fasteners will be free of defects in materials and workmanship and that theyconform to applicable specifications. SFS intec’s liability on products found to be defective is exclusively limitedto replacement of defective products or at the option of SFS intec, to refund the purchase price. SFS intec, Inc. shallnever be liable for any consequential damages. This warranty is expressly in lieu of other warranties, express orimplied and whether statutory or otherwise, including any implied warranty of merchantability of fitness for a par-ticular purpose.
INSTALLATION TOOLSGESIPA® rivet installation tools are covered under a 12 month warranty from the date of purchase from SFS intec,Inc. Normal wearing parts and/or damage due to improper use are excluded from said warranty. SFS intec, Inc. shallnever be liable for any consequential damages. This warranty is expressly in lieu of other warranties, express orimplied and whether statutory or otherwise, including any implied warranty of merchantability of fitness for a par-ticular purpose.
RIVET SIZE CHARTBODY DIAMETERS
US METRIC
3/32” 2.4 mm-- 3.0 mm
1/8” 3.2 mm5/32” 4.0 mm3/16” 4.8 mm
-- 5.0 mm-- 6.0 mm
1/4” 6.4 mm9/32” --5/16” --3/8” --
Technical advice and sales service
SFS intec, Inc. FasteningSystems Spring St. & Van Reed Rd.PO Box 6326US-Wyomissing, PA 19610
800 234 4533T +1 610 376 5751F +1 610 376 [email protected]
© S
FS in
tec
2011
/ P
rin
ted
in t
he
Un
ited
Sta
tes
Su
bje
ct t
o t
ech
nic
al m
od
ific
atio
n
Top Related