PRADIS CLAMP B2
ANZIO FLOOR MOUNT CHANNEL B3
LUGANO FACE FIX CLAMP B4
MONACO FLOOR MOUNT CLAMP B5
EUROANCHOR DISCS & SPACERS B6 - B8
MILANO EUROPOSTS B9
EUROBRACE & MINIPOSTS B10 - B11
HANDRAILS & HANDRAIL BRACKETS B12 - B18
BRACKETS & CLAMPS B19 - B20
VIENNA HYDRAULIC HINGE & LATCH B21 - B22
POOL GATE DOOR PIVOTS B23
CABANA SLIDING BALUSTRADEBALCONY SCREEN
B24 - B25
BALUSTRADE & POOL:INDEX
CATALOGUE EFFECTIVE 1ST FEBRUARY 2017
B1
CALL: (09) 624-1180www.euroglass.co.nz
PRADIS CLAMP B2
ANZIO FLOOR MOUNT CHANNEL B3
LUGANO FACE FIX CLAMP B4
MONACO FLOOR MOUNT CLAMP B5
EUROANCHOR DISCS & SPACERS B6 - B8
MILANO EUROPOSTS B9
EUROBRACE & MINIPOSTS B10 - B11
HANDRAILS & HANDRAIL BRACKETS B12 - B18
BRACKETS & CLAMPS B19 - B20
VIENNA HYDRAULIC HINGE & LATCH B21 - B22
POOL GATE DOOR PIVOTS B23
CABANA SLIDING BALUSTRADEBALCONY SCREEN
B24 - B25
BALUSTRADE & POOL:PRADIS
Glass Cut Out Detail
B2
CALL: (09) 624-1180www.euroglass.co.nz
PRADIS Face mounted clampEZ1
AVAILABLE FINISHES• Satin anodised aluminium • Selected powdercoat, lead time applies
TECHNICAL DETAILSUsing a single fixing bolt PRADIS can be fixed to the following different substrate types;
• Concrete • Steel • Timber - lag screw and bolt through
Supporting clamp can be anotec powder-coated with 10yr warrantyPS1 available on requestPRADIS is designed to take Viridian toughened or Viridian toughened laminated safety glass Suitable for glass thickness from 12mm to 22.38mm (can be adapted to take other glass thicknesses - upon request)
Suitable for;Balustrade - Residential Occupancies A, A (other) & C3Balustrade - Commercial Occupancies C3, B, E, C1/C2 and DBalustrade - Commercial Occupancy C5, Specific design is required (Based on barrier loads from AS/NZS1170.1: 2002)Pool fencing and wind breaks
Refer to our website for glass height limits and fixing requirements
Bottom Edge of Glass
60mm
30mm diameter
BALUSTRADE & POOL:ANZIO
ANZIO Residential and Commercial Floor Mount ChannelETB
AVAILABLE FINISHES• Mill finish• Silver Pearl powdercoat • Selected powdercoat, lead time applies
TECHNICAL DETAILS1.25m, 2.5m and 5m stock lengthsFixing kits available for the following different substrate types; • Concrete
• TimberSupplied complete with clamping kits, fixing sets and cover platesSupplied with predrilled holes; 100mm in and 200mm ctcANZIO glass clamp kits are placed every 400mm ctc and no more than 200mm in from the edge of the glassBase channel and cover plate is anotec powder-coated with 10yr warrantyPS1 available on requestSuitable to be used with;Viridian 12mm, 15mm toughened safety glass or 13.5mm, 17.5mm toughened laminated safety glassRated up to a very high wind zone 1.76 kPa or less
Designed for;- Balustrade Residential Occupancies A & C3 - Balustrade Commercial Occupancies B, E, C3, C1/C2 & D (Based on barrier loads from AS/NZS1170.1)- Pool fencing- Wind breaks
Refer to our website for technical data sheets and fixing requirements
Glass Cut Out Detail
30
47
Bottom Edge of Glass
112
mm
30 mmGlass clearance
11.
5 m
m
84.5 mm
COPYRIGHT 2014This drawing and or specification is the property of Euroglass Systems Ltd - and must be returned to them on request. Unauthorised use may result in Legal Action. Its contents must not be made public, nor copied, nor used directly or indirectly in any way.
65 Carr RoadMt RoskillAucklandNew Zealand+694 624-1180
PROJECTIONTHIRD ANGLE
DRAWN IN
A1044-01-00-01
DFinish:- Date:
-
Tolerance (Unless otherwise stated)Dec place 0.00 0.1mm 0.0 0.2mm 0 0.5mmAngular 0.5
MODIFICATIONS
Sheet:
Part Name:
C-
1/04/2014 Rev-
Anzio Balustrade SystemB
Material: REV BY
1044
-01-
00-0
1
Scale (A3):
Remove all burrs & sharp edges.
REV Drawn:
Special Instructions:
ADATE
Drawing No.
1:5
1/04/2014
1 of 2See component drawings
B3
CALL: (09) 624-1180www.euroglass.co.nz
LUGANO Residential Face Fix ChannelEFC
AVAILABLE FINISHES• Mill• Silver Pearl powdercoat • Selected powdercoat, lead time applies
TECHNICAL DETAILS1.2m, 2.4m and 4.8m stock lengthsFixing kits available for the following different substrate types; • Concrete • Steel • Bolt through timber fix • Lag screw timber fixSuitable for 12mm toughened and 13.5mm laminated glassRecommended installation tools availableEnd, internal and external corner caps availableNo glass cut outs or holes requiredSupporting base channel is anotec powder-coated with 10yr warrantyPS1 available on requestSuitable to be used with;Viridian 12mm toughened or 13.5mm toughened laminated safety glassRated up to a very high wind zone 1.76 kPa or less
Designed for;Balustrade - Residential Occupancies A & C3Balustrade - Commercial Occupancy C3 (with the use of a interlinking rail) (Based on barrier loads from AS/NZS1170.1)Pool fencing protecting a fall of 1 metre or morePool fencing
Refer to our website for further details and fixing requirements
BALUSTRADE & POOL:LUGANO
Concrete fixing
B4
CALL: (09) 624-1180www.euroglass.co.nz
BALUSTRADE & POOL:MONACO
MONACO Commercial Face Fix ClampEGL
AVAILABLE FINISHES• Mill• Silver Pearl powdercoat • Selected powdercoat, lead time applies
TECHNICAL DETAILS1.2m, 2.4m and 4.8m stock lengthsSETS available for the different fixing options:• Concrete fix• Steel fix • Bolt through timber fix
Suitable for 15mm and 19mm toughened and 17.5mm and 21.5mm laminated glassRecommended installation tools availableEnd, internal and external corner caps availableGlass cut-out requiredSupporting base channel is anotec powder-coated with 10yr warrantyPS1 available on requestRated up to a ULS wind pressure of 3.0 kPa or less
Designed for;Balustrade - Residential Occupancies A & C3Balustrade - Commercial Occupancies B, E, C1, C2, D & C3 (Based on barrier loads from AS/NZS1170.1)Pool fencing protecting a fall of 1 metre or morePool fencing
Refer to our website for further details and fixing requirements
B5
CALL: (09) 624-1180www.euroglass.co.nz
Concrete fixing
Glass notch
EUBFSD50/51 Euroanchor 50mm stepped discEUBFSD50 includes 25mm thick spacer / EUBFSD51 includes 10mm thick spacer
AVAILABLE FINISHES• Satin anodised• Polished stainless steel • Satin stainless steel
TECHNICAL DETAILSManufactured in 316 grade stainless steelAnodised to over 20 µmThe substrate material can be concrete, steel or timberIncludes washer, PVC sleeve & fixing (please specify either lag screw or threaded rod)Glass fixing hole 26mm dia25mm spacer can be threaded M10 or 10.5mm through hole (specify upon order)Fixing centres as per PS1PS1 available on request
EUBFSQ Euroanchor 50mm square stepped disc
AVAILABLE FINISHES• Polished stainless steel • Satin stainless steel
TECHNICAL DETAILSManufactured in 316 grade stainless steelThe substrate material can be concrete, steel or timber Includes washer, PVC sleeve & fixing (please specify either lag screw or threaded rod)Glass fixing hole 26mm diaFixing centres as per PS1 PS1 available on request
EUBFCS Euroanchor 50mm countersunk stepped disc
AVAILABLE FINISHES• Polished stainless steel • Satin stainless steel
TECHNICAL DETAILSManufactured in 316 grade stainless steelThe substrate material can be concrete, steel or timber10mm and 25mm spacers available Includes washer, PVC sleeve & fixing (please specify either lag screw or threaded rod)Glass fixing hole 22mm dia25mm spacer threaded M10M10 x 35 countersunk hex boltFixing centres as per PS1PS1 available on request
EUBFSQD Euroanchor rectangular stepped disc
AVAILABLE FINISHES• Polished stainless steel • Satin stainless steel
TECHNICAL DETAILSManufactured in 316 grade stainless steelThe substrate material can be concrete, steel or timberDouble 25mm spacer 10.5mm through holeIncludes washer, PVC sleeve & fixing (please specify either lag screw or threaded rod)Glass fixing hole 26mm diaFixing centres as per PS1PS1 available on request
BALUSTRADE & POOL:EUROANCHOR STEPPED DISCS
B6
CALL: (09) 624-1180www.euroglass.co.nz
10
EUBFSD52 Euroanchor 50mm stepped disc with a 10mm thick stair stringer spacerEUBFSD53 Euroanchor 50mm stepped disc with a 25mm thick stair stringer spacer
AVAILABLE FINISHES• Polished stainless steel • Satin stainless steel
TECHNICAL DETAILSManufactured in 316 grade stainless steelCentre hole of the spacer is threaded and countersunk to suit M10 countersunk hex bolt3x countersunk fixing holes to suit 14G countersunk self tapping screwIncludes washer, PVC sleeve & fixings;EUBFSD52 is supplied with 3x 14G x 50mm c/snk self tapping screwsEUBFSD53 is supplied with 3x 14G x 60mm c/snk self tapping screwsGlass fixing hole 26mm diaDesigned for timber stringersFixing centres as per PS1PS1 available on request
Important Note:EUBFSD52 and EUBFSD53 Euroanchors are only suitable for residential occupancy A and internal stair barriers within detached dwellings and household units.
BALUSTRADE & POOL:EUROANCHOR STEPPED DISCS
11
0M
inim
um
14g screw3off @ PCD33
40Minimum penetration
M10x40 C/SNK S.S 316MACHINE SCREW
TIMBERFOR INTERNAL INSTALLATION ONLY
25
12 minmum glass thickness
Stepped discs @400mm crs maximum
25
mm
min
45
110
Min
imum
14g screw3off @ PCD33
40Minimum penetration
M10 S.S 316THREADED ROAD
30mm LONG
12 minimum glass thickness
Stepped discs @400mm crs maximum
25m
m m
in
45
10
EUBFSD52 Detail
EUBFSD53 Detail
B7
CALL: (09) 624-1180www.euroglass.co.nz
SP5025T and SP5025 Spacers
AVAILABLE FINISHES• Satin anodised• Polished stainless steel • Satin stainless steel
TECHNICAL DETAILSSP5025T - Threaded M10 holeSP5025 - 10.5mm dia. through hole
STSP25 and STSP10 Stair stringer spacer
AVAILABLE FINISHES• Polished stainless steel • Satin stainless steel
TECHNICAL DETAILSCentre hole is threaded and countersunk, to suit M10 countersunk hex bolt3x countersunk fixing holes to suit 14G countersunk screwsSTSP25 = 25mm thick spacer, STSP10 = 10mm thick spacerFixings sold separatelyImportant Note: STSP spacers can only be used for residential occupancy A and internal stair barriers within detached dwellings and household units.
SPC5010 Countersunk disc or Spacer
AVAILABLE FINISHES• Polished stainless steel • Satin stainless steel
TECHNICAL DETAILSDrilled and countersunkTo suit M10 countersunk hex bolt
SD50M10 Stepped disc
AVAILABLE FINISHES• Satin anodised• Polished stainless steel • Satin stainless steel
TECHNICAL DETAILSM10 threaded blind hole
SP505WB Weatherboard shim
AVAILABLE FINISHES• Satin anodised• Polished stainless steel • Satin stainless steel
TECHNICAL DETAILS8 degree angle12mm thick tapered to 5mm10.5mm dia. through hole
SPG3210/12 Gib spacers
AVAILABLE FINISHES• Plastic • Aluminium
TECHNICAL DETAILS10mm thick plastic or aluminum12mm thick plastic or aluminium
BALUSTRADE & POOL:SPACERS & STEPPED DISCS
B8
CALL: (09) 624-1180www.euroglass.co.nz
25
Ø50
Ø50
10
Ø50
12
Ø32
10 or 12
Ø50
Ø50
BALUSTRADE & POOL:MILANO EUROPOST RESIDENTIAL
MILANO POST Semi-Frameless Residential Balustrade PostsERP AVAILABLE FINISHES• Silver Pearl powdercoat• Selected powdercoat
TECHNICAL DETAILSBased on design loads from AS/NZS 1170.1 and a max uls wind pressure of 1.76 kPa (very high wind zone)Rated for Residential occupancy A and C3Suited for Viridian ‘Balustrade 100’ 10mm toughened safety glass or 11.5mm toughened laminate glassFixed at 1650mm centresMaximum height 1100mmMaximum glass overhang 500mmPS1 available on requestRefer to our website for further details
MILANO POST Semi-Frameless Commercial Balustrade Posts
AVAILABLE FINISHES• Silver Pearl powdercoat• Selected powdercoat
TECHNICAL DETAILS
TCan be used in any commercial occupancyConcrete or bolt through timber
PS1 available on requestRefer to our website for further details
500mm max.
500mm max.
500mm max.
500mm max.
B9
CALL: (09) 624-1180www.euroglass.co.nz
EB1 Eurobrace
AVAILABLE FINISHES• Polished stainless steel• Satin stainless steel
TECHNICAL DETAILSManufactured in 316 grade stainless steelSuitable for 10, 12 and 15mm glassPosts are set into concrete (Ø50mm hole) and affixed using SIKA or ROCKITE grout (to manufacturer’s specifications)26mm diameter holes in glass45mm typical clearance from ground surfaceDistance from inside face of glass and post centre is 40mmPS1 available on requestRefer our website for further details
EB2 Eurobrace, square
AVAILABLE FINISHES• Polished stainless steel• Satin stainless steel
TECHNICAL DETAILSManufactured in 316 grade stainless steelSuitable for 10, 12 and 15mm glassPosts are set into concrete (Ø50mm hole) and affixed using SIKA or ROCKITE grout (to manufacturer’s specifications)26mm diameter holes in glass45mm typical clearance from ground surfaceDistance from inside face of glass and post centre is 32mmPS1 available on requestRefer our website for further details
BALUSTRADE & POOL:EUROBRACE POSTS
B10
CALL: (09) 624-1180www.euroglass.co.nz
40 50
110
265
110
50
44
260
Glass Cut Out Detail
110
45
50
Ø26
Glass Cut Out Detail
110
45
50
Ø26
FMP250 Miniposts
AVAILABLE FINISHES• Polished stainless steel• Satin stainless steel
TECHNICAL DETAILSManufactured in 316 grade stainless steelSuitable for 12 and 15mm glassMini posts are set 85mm into concrete (Ø60mm hole) and affixed using SIKA or ROCKITE grout (to manufacturer’s specifications)26mm diameter hole in glass45mm typical clearance from ground surfaceOptional Dress Ring or Cover Plate availablePS1 available on requestRefer our website for further details
FMP350 Miniposts
AVAILABLE FINISHES• Polished stainless steel• Satin stainless steel
TECHNICAL DETAILSManufactured in 316 grade stainless steelSuitable for 12 and 15mm glass26mm diameter hole in glass45mm typical clearance from ground surfacePosts can be fastened to concrete or wooden surfaces using 2 x M10 bolts/screwsPS1 available on requestRefer our website for further details
BALUSTRADE & POOL:MINI POSTS
B11
CALL: (09) 624-1180www.euroglass.co.nz
165
17
250
Ø50
Ø26
65
45
Glass Cut Out Detail
77
Ø26
45
Glass Cut Out Detail
FMP250RING 80mm outside dia.
51mm inside dia.
FMP250COVER 125mm outside dia.
51mm inside dia.(matches FMP350 cover)
50
187
Ø90 PCD4 holes
14
Ø125
BALUSTRADE & POOL:HANDRAILS
HRC1 Roundline Interlinking Handrail2205 Duplex Stainless Steel Interlinking Handrail Capping
AVAILABLE FINISHES• Polished stainless steel• Satin stainless steel, lead time applies
TECHNICAL DETAILS5.8m stock lengthsGlass width limits can be found on page B14Easy to install using simple tools, no on site welding requiredRoundline is easily attached to the glass using a compression fit rubber moldingSuitable for 12mm, 15mm and 19mm toughened safety glass and 13.5mm and 17.5mm toughened laminated safety glassJoiners, end caps and wall mount brackets are glued together using tube lockJoiners need be located between the glass panesWall mount bracket requires a EPDM washer when penetrating cladding, weatherboards and membrane surfacesEPDM washers are sold separately (lead time applies)
Range of components;
42 dia
HRC1C90Cast 90deg Corner
HRC1SJStraight Joiner
HRC1ECEnd Cap
HRC1WAWall Anchor
HRC1VAJVertical Adjustable
Joiner
HRC1HAJHorizontal
Adjustable Joiner
B12
CALL: (09) 624-1180www.euroglass.co.nz
BALUSTRADE & POOL:HANDRAILS
HRC2 Squareline Interlinking Handrail2205 Duplex Stainless Steel Interlinking Handrail Capping
AVAILABLE FINISHES• Polished stainless steel• Satin stainless steel, lead time applies
TECHNICAL DETAILS5.8m stock lengthsGlass width limits can be found on page B14Easy to install using simple tools, no on site welding requiredSquareline is easily attached to the glass using a compression fit rubber moldingSuitable for 12mm, 15mm and 19mm toughened safety glass and 13.5mm and 17.5mm toughened laminated safety glassJoiners, end caps and wall mount brackets are glued together using tube lockJoiners need be located between the glass panesWall mount bracket requires a EPDM washer when penetrating cladding, weatherboards and membrane surfacesEPDM washers are sold separately (lead time applies)
Range of components;
40
HRC2C90Cast 90deg Corner
HRC2SJStraight Joiner
HRC2ECEnd Cap
HRC2WAWall Anchor
HRC2VAJVertical Adjustable
Joiner
HRC2HAJHorizontal
Adjustable Joiner
30
B13
CALL: (09) 624-1180www.euroglass.co.nz
BALUSTRADE & POOL:HANDRAILS
HRC1 Roundline Interlinking HandrailHRC2 Squareline Interlinking Handrail
TECHNICAL DETAILS - GLASS WIDTH LIMITS
HRC1 Roundline Interlinking Handrail
Occupancy type A other and C3; Maximum glass width 2200mm Occupancy type C1/C2 & D; Maximum glass width 1400mmOccupancy type C5; Specific design is required
HRC2 Squareline Interlinking Handrail
Occupancy type A other and C3; Maximum glass width 2100mm Occupancy type C1/C2 & D; Maximum glass width 1400mmOccupancy type C5; Specific design is required
Notes;1) These interlinking rails are designed to resist SLS design loads in the event of a single pane of glass breaking2) Interlinking rail must be supported by each pane, structural post or other building element3) Interlinking rail must be mechanically connected using joiners or welded together4) Joiners or welds need be located between the glass panes5) In the unlikely event of a glass pane breaking, the deflection of this interlinking rail under SLS design loads is restricted to span / 606) Specific design is required for occupancy type C5
B14
CALL: (09) 624-1180www.euroglass.co.nz
BALUSTRADE & POOL:HANDRAILS
HRC3 ArchlineAluminium Interlinking Handrail Capping
AVAILABLE FINISHES• Mill• Silver Pearl powdercoat • Selected powdercoat, lead time applies
TECHNICAL DETAILS5m stock lengthsGlass width limits can be found on page B16Easy to install using simple tools, no on site welding requiredSuitable for 12mm and 15mm toughened safety glass and 13.5mm and 17.5mm toughened laminated safety glassInterlinking capping is anotec powdercoated with a 10yr warrantyJoiners, end caps and wall mount brackets are supplied complete with screwsHRC3WM - wall mount bracket requires a EPDM washer when penetrating cladding, weatherboards and membrane surfaces. HRC3EPDM sold separately.
Range of components;
HRC3SJStraight Joiner Connection Detail
35
50
20
HRC3J90 HRC3EC HRC3WM HRC3SJ
HRC3J9090deg Joiner Connection Detail
HRC3WMWall Mount Bracket Connection Detail
Joiner Installation Details
B15
CALL: (09) 624-1180www.euroglass.co.nz
BALUSTRADE & POOL:HANDRAILS
HRC3 ArchlineAluminium Interlinking Handrail Capping
Glass Mounting Detail
Glass Width Limits
Occupancy type A other and C3; Maximum glass width 1850mm Occupancy type C1/C2 & D; Maximum glass width 1000mmOccupancy type C5; Specific design is required
Notes;1) This interlinking rail is designed to resist SLS design loads in the event of a single pane of glass breaking2) Interlinking rail must be supported by each pane, structural post or other building element3) Interlinking rail must be mechanically connected using joiners or welded together4) Joiners or welds need be located between the glass panes5) In the unlikely event of a glass pane breaking, the deflection of this interlinking rail under SLS design loads is restricted to span / 606) Specific design is required for occupancy type C5
B16
CALL: (09) 624-1180www.euroglass.co.nz
Medium density single
BH1 Slimline handrail & end cap
AVAILABLE FINISHES• Mill finish• Silver Pearl powdercoat• Selected powdercoat (lead time applies)
TECHNICAL DETAILSMeets AS1288-2006 for handrailing for glass balustrades that are over 1m in height and only fixed to the baseComplies with NZS4203:1992 for handrailsSuitable for 10mm and 12mm glass (specify when ordering)Can be used for both interior and exterior applicationsDesigned for easy fitting, clips directly over the glass: no welding required and can be installed after glass is fitted
EUHB50 Handrail bracket
AVAILABLE FINISHES• Polished stainless steel• Satin stainless steel
TECHNICAL DETAILS26mmØ hole in glass for EUHB50Supplied 150mm high for on-site trimming
EUHB50SQ Handrail bracket, square
AVAILABLE FINISHES• Polished stainless steel• Satin stainless steel
TECHNICAL DETAILS26mmØ hole in glassSupplied 150mm high for on-site trimming
EUHBTF50 Handrail bracket timber fix
AVAILABLE FINISHES• Polished stainless steel• Satin stainless steel
TECHNICAL DETAILSDesigned for timber fixingSupplied 150mm high for on-site trimming
EUHBTF50SQ Handrail bracket timber fix, square
AVAILABLE FINISHES• Polished stainless steel• Satin stainless steel
TECHNICAL DETAILSDesigned for timber fixingSupplied 150mm high for on-site trimming
BALUSTRADE & POOL:HANDRAILS
B17
CALL: (09) 624-1180www.euroglass.co.nz
BH2End Cap
22mm
30mm
HBGM1 Round glass mounted handrail bracket
AVAILABLE FINISHES• Polished stainless steel• Satin stainless steel• Custom finishes available upon request
TECHNICAL DETAILSMade from 2205 Duplex stainless steelCan be used with balustrades that require a load supporting interlinking rail26mmØ hole in glass
HBGM2 Square glass mounted handrail bracket
AVAILABLE FINISHES• Polished stainless steel• Satin stainless steel• Custom finishes available upon request
TECHNICAL DETAILSMade from 2205 Duplex stainless steelCan be used with balustrades that require a load supporting interlinking rail26mmØ hole in glass
HBWM1 Round wall mounted handrail bracket
AVAILABLE FINISHES• Polished stainless steel• Satin stainless steel• Custom finishes available upon request
TECHNICAL DETAILSMade from 2205 Duplex stainless steelCan be used with balustrades that require a load supporting interlinking railMounted to the wall using 3x countersunk screws (screws not included)
HBWM2 Square wall mounted handrail bracket
AVAILABLE FINISHES• Polished stainless steel• Satin stainless steel• Custom finishes available upon request
TECHNICAL DETAILSMade from 2205 Duplex stainless steelCan be used with balustrades that require a load supporting interlinking railMounted to the wall using 3x countersunk screws (screws not included)
HBFS Handrail bracket fixing straddle
AVAILABLE FINISHES• Polished stainless steel• Satin stainless steel• Custom finishes available upon request
TECHNICAL DETAILSMade from 2205 Duplex stainless steelDesigned for mounting handrail sections to the handrail bracketSupplied with M8 screw for fixing to the handrail bracketHandrail section fixing screws are not included
BALUSTRADE & POOL:HANDRAILS
B18
CALL: (09) 624-1180www.euroglass.co.nz
50dia
75
75
M8
16diaR25
50dia
75
75
M8
16diaR25
50mdia
75
75
16dia R25
M8
50mdia
75
75
16dia R25
M8
BCI/BCWM/BC90/BC135 Balustrade clamps
AVAILABLE FINISHES• Polished stainless• Satin stainless
TECHNICAL DETAILSSuitable for 12mm glass316 grade stainless steelSupplied with rubber gasket inserts
BB70/BB70SQ Balustrade brackets, wall mount
AVAILABLE FINISHES• Polished stainless• Satin stainless
TECHNICAL DETAILSSuitable for 10 and 12mm glass316 grade stainless steelRound and square options
BBD70/BBD70SQ Balustrade brackets, glass/glass
AVAILABLE FINISHES• Polished stainless• Satin stainless
TECHNICAL DETAILSSuitable for 10 and 12mm glass316 grade stainless steelRound and square options
BALUSTRADE & POOL:BRACKETS & CLAMPS
B19
CALL: (09) 624-1180www.euroglass.co.nz
BB70 BB70SQ
BBD70 BBD70SQ
33 20
Ø18 holein glass
45
��
�����
��
��
��
��������������
������� ���� ������������� ������������������������� ����������������� �����������
�������������������� ������� �������������� �������������� �������������������������
������� ������������������������������������������������������ ���� �
������ ������������
������� ��������
��������� ����� ����� ��
��������
���� ���� �
���������
����� ��
������ � ��
�������������
� ���� ���
�� ����� ������
�� ���
� ���
�� ��������
������� ���� ��
�������
����������
�����������
����������� ������������� ����
�
�
���������� ��
��
�
����� ������������������ ����������������������� ����
������ ������������ ����
���������������������������� ����
������������������������������ ����
���� ���� ��
������ ������������� �������
�������������
���
��
��
��
���
�
���
��
���
�
���
� �
���
�¡
��
��
���
��
���
�
���
� �
���
�
���
�
���
����
�������
���� ��������������������������
���� �������
�������������������������������������������������������������������������� ������������
��������������������������������������������������������������������������������������������
�������������������������������������������������������������������������
�������������������
�������� ��������
������������������������
���������
�������� ���
��� ������
��������
�����������
�������� ����
����������
����������� ������
������
�����
�����������
�����������������
�������
� �������
� �������
� ������ �� ������������ ���
�
�
�
�����������
�
�
�������������������������������������������������������
�������������������� �����
����������������������������� �����
������������������������������ �����
���������� ���
�����������������������������
������������������
���
��
��
��
���
��
���
���
���
��
���
���
���
�¡
��
��
���
���
���
��
���
���
��
��
���
��
���
����
��
��
�¡�����
��
��
���
��
¡�
��
��
��
�� ��
��
��
�����
�������
��������������
������� ���� ������������� ������������������������� ����������������� �����������
�������������������� ������� �������������� �������������� �������������������������
������� ������������������������������������������������������ ���� �
������ ������������
������� �������
�������� ����� ����� ��
��������
���� ���� �
���������
����� ��
������ � ��
�������������
� ���� ���
�� ����� ������
�� ���
� ���
�� ��������
������� ���� ��
�������
����������
�����������
����������� ������������� ����
�
�
���������� ��
��
�
����� ������������������ ����������������������� ����
������ ������������ ����
���������������������������� ����
������������������������������ ����
���� ���� ��
������ ������������� �������
�����������������
���
��
��
��
���
�
���
��
���
�
���
� �
���
�¡
��
��
���
��
���
�
���
� �
���
�
���
�
���
��
��
��
��
�������
��� ����������
��
�����
��
��
��
��������������
������� ���� ������������� ������������������������� ����������������� �����������
�������������������� ������� �������������� �������������� �������������������������
������� ������������������������������������������������������ ���� �
������ ������������
������� ��������
��������� ����� ����� ��
��������
���� ���� �
���������
����� ��
������ � ��
�������������
� ���� ���
�� ����� ������
�� ���
� ���
�� ��������
������� ���� ��
�������
����������
�����������
����������� ������������� ����
�
�
���������� ��
��
�
����� ������������������ ����������������������� ����
������ ������������ ����
���������������������������� ����
������������������������������ ����
���� ���� ��
������ ������������� �������
�������������
���
��
��
��
���
�
���
��
���
�
���
� �
���
�¡
��
��
���
��
���
�
���
� �
���
�
���
�
���
����
�������
���� ����������
BCIGlass-to-Glass
typical height
BC9090˚ Corner
BCWMWall Mount
18
BALUSTRADE & POOL:CLAMPS
BCRD6/10, BCFD6/10, BCRS8/10, BCFS8/10 Glass clamps, post or wall mount
AVAILABLE FINISHES• Polished stainless• Satin stainless
TECHNICAL DETAILSOptions for 6, 8, 10 and 12mm glass316 grade stainless steelRound and square profilesFlat back for fixing to square section and wall mounting, or round back to suit 50mm tubular post
45
47
27
Gla
ss8-
10m
m
17
Code No. Item Number Finish
BCFS8PS 8752405 Polished
BCFS8SS 8752406 Satin
COPYRIGHT 2010This drawing and or specification is the property of Euroglass Systems Ltd - and must be returned to them on request. Unauthorised use may result in Legal Action. Its contents must not be made public, nor copied, nor used directly or indirectly in any way.
316 Stainless Steel
SatinPolished 01/02/2011
01/02/2011 Balustrade Clamp Flat back
1:1 1 of 2
65 Carr RoadMt RoskillAucklandNew Zealand+694 624-1180
Part Name:
Drawing No. Sheet:
Drawn:
Date:
Scale (A4):
G.BourneMaterial:
Finish:PROJECTIONTHIRD ANGLE
DRAWN IN REV MODIFICATIONS DATE
--
--First Drawn
--A
Special Instructions:Tolerances (Unless otherwise stated)Dec place 0.00 0.1mm 0.0 0.2mm 0 0.5mmAngular 0.5
Remove all burrs & sharp edges.
Square shape 8-10mm
8752405
45
49
27
17
Gla
ss8-
10m
m
Code No. Item Number Finish
BCRS8PS 8753405 Polished
BCRS8SS 8753406 Satin
COPYRIGHT 2010This drawing and or specification is the property of Euroglass Systems Ltd - and must be returned to them on request. Unauthorised use may result in Legal Action. Its contents must not be made public, nor copied, nor used directly or indirectly in any way.
316 Stainless Steel
SatinPolished 01/02/2011
01/02/2011 Balustrade Clamp Round back
1:1 1 of 2
65 Carr RoadMt RoskillAucklandNew Zealand+694 624-1180
Part Name:
Drawing No. Sheet:
Drawn:
Date:
Scale (A4):
G.BourneMaterial:
Finish:PROJECTIONTHIRD ANGLE
DRAWN IN REV MODIFICATIONS DATE
--
--First Drawn
--A
Special Instructions:Tolerances (Unless otherwise stated)Dec place 0.00 0.1mm 0.0 0.2mm 0 0.5mmAngular 0.5
Remove all burrs & sharp edges.
Square shape 8-10mm
8753405
53
3824
14
Gla
ss6-
8mm
Code No. Item Number Finish
BCRD6PS 8751405 Polished
BCRD6SS 8751406 Satin
COPYRIGHT 2010This drawing and or specification is the property of Euroglass Systems Ltd - and must be returned to them on request. Unauthorised use may result in Legal Action. Its contents must not be made public, nor copied, nor used directly or indirectly in any way.
316 Stainless Steel
SatinPolished 01/02/2011
01/02/2011 Balustrade Clamp Round back
1:1 1 of 2
65 Carr RoadMt RoskillAucklandNew Zealand+694 624-1180
Part Name:
Drawing No. Sheet:
Drawn:
Date:
Scale (A4):
G.BourneMaterial:
Finish:PROJECTIONTHIRD ANGLE
DRAWN IN REV MODIFICATIONS DATE
--
--First Drawn
--A
Special Instructions:Tolerances (Unless otherwise stated)Dec place 0.00 0.1mm 0.0 0.2mm 0 0.5mmAngular 0.5
Remove all burrs & sharp edges.
D shape 6-8mm
8751405
49
38
24
14
Gla
ss6-
8mm
Code No. Item Number Finish
BCFD6PS 8750405 Polished
BCFD6SS 8750406 Satin
COPYRIGHT 2010This drawing and or specification is the property of Euroglass Systems Ltd - and must be returned to them on request. Unauthorised use may result in Legal Action. Its contents must not be made public, nor copied, nor used directly or indirectly in any way.
316 Stainless Steel
SatinPolished 01/02/2011
01/02/2011 Balustrade Clamp Flat back
1:1 1 of 2
65 Carr RoadMt RoskillAucklandNew Zealand+694 624-1180
Part Name:
Drawing No. Sheet:
Drawn:
Date:
Scale (A4):
G.BourneMaterial:
Finish:PROJECTIONTHIRD ANGLE
DRAWN IN REV MODIFICATIONS DATE
--
--First Drawn
--A
Special Instructions:Tolerances (Unless otherwise stated)Dec place 0.00 0.1mm 0.0 0.2mm 0 0.5mmAngular 0.5
Remove all burrs & sharp edges.
D shape 6-8mm
8750405
38
53 49
45
49
45
47
54
38
65
54
60
55
60
65
5427
25
Gla
ss10
-12m
m
Code No. Item Number Finish
BCRD10PS 8755405 Polished
BCRD10SS 8755406 Satin
COPYRIGHT 2010This drawing and or specification is the property of Euroglass Systems Ltd - and must be returned to them on request. Unauthorised use may result in Legal Action. Its contents must not be made public, nor copied, nor used directly or indirectly in any way.
316 Stainless Steel
SatinPolished 01/02/2011
01/02/2011 Balustrade Clamp Round back
1:1 1 of 2
65 Carr RoadMt RoskillAucklandNew Zealand+694 624-1180
Part Name:
Drawing No. Sheet:
Drawn:
Date:
Scale (A4):
G.BourneMaterial:
Finish:PROJECTIONTHIRD ANGLE
DRAWN IN REV MODIFICATIONS DATE
--
--First Drawn
--A
Special Instructions:Tolerances (Unless otherwise stated)Dec place 0.00 0.1mm 0.0 0.2mm 0 0.5mmAngular 0.5
Remove all burrs & sharp edges.
D shape 10-12mm
8755405
60
5426
22
Gla
ss10
-12m
m
19
Code No. Item Number Finish
BCFD10PS 8754405 Polished
BCFD10PSS 8754406 Satin
COPYRIGHT 2010This drawing and or specification is the property of Euroglass Systems Ltd - and must be returned to them on request. Unauthorised use may result in Legal Action. Its contents must not be made public, nor copied, nor used directly or indirectly in any way.
316 Stainless Steel
SatinPolished 01/02/2011
01/02/2011 Balustrade Clamp Flat back
1:1 1 of 2
65 Carr RoadMt RoskillAucklandNew Zealand+694 624-1180
Part Name:
Drawing No. Sheet:
Drawn:
Date:
Scale (A4):
G.BourneMaterial:
Finish:PROJECTIONTHIRD ANGLE
DRAWN IN REV MODIFICATIONS DATE
--
--First Drawn
--A
Special Instructions:Tolerances (Unless otherwise stated)Dec place 0.00 0.1mm 0.0 0.2mm 0 0.5mmAngular 0.5
Remove all burrs & sharp edges.
D shape 10-12mm
8754405
55
60
19
Gla
ss10
-12m
m
Code No. Item Number Finish
BCRS10PS 8757405 Polished
BCRS10SS 8757406 Satin
COPYRIGHT 2010This drawing and or specification is the property of Euroglass Systems Ltd - and must be returned to them on request. Unauthorised use may result in Legal Action. Its contents must not be made public, nor copied, nor used directly or indirectly in any way.
316 Stainless Steel
SatinPolished 02/02/2011
02/02/2011 Balustrade clamp Round back
1:1 1 of 2
65 Carr RoadMt RoskillAucklandNew Zealand+694 624-1180
Part Name:
Drawing No. Sheet:
Drawn:
Date:
Scale (A4):
G.BourneMaterial:
Finish:PROJECTIONTHIRD ANGLE
DRAWN IN REV MODIFICATIONS DATE
--
--First Drawn
--A
Special Instructions:Tolerances (Unless otherwise stated)Dec place 0.00 0.1mm 0.0 0.2mm 0 0.5mmAngular 0.5
Remove all burrs & sharp edges.
Square shape 10-12mm
8757405
55
56
31
17
Gla
ss10
-12m
m
Code No. Item Number Finish
BCFS10PS 8756405 Polished
BCFS10SS 8756406 Satin
COPYRIGHT 2010This drawing and or specification is the property of Euroglass Systems Ltd - and must be returned to them on request. Unauthorised use may result in Legal Action. Its contents must not be made public, nor copied, nor used directly or indirectly in any way.
316 Stainless Steel
SatinPolished 01/02/2011
01/02/2011 Balustrade Clamp Flat back
1:1 1 of 2
65 Carr RoadMt RoskillAucklandNew Zealand+694 624-1180
Part Name:
Drawing No. Sheet:
Drawn:
Date:
Scale (A4):
G.BourneMaterial:
Finish:PROJECTIONTHIRD ANGLE
DRAWN IN REV MODIFICATIONS DATE
--
--First Drawn
--A
Special Instructions:Tolerances (Unless otherwise stated)Dec place 0.00 0.1mm 0.0 0.2mm 0 0.5mmAngular 0.5
Remove all burrs & sharp edges.
Square shape 10-12mm
8756405
BCFD10 Flat back 10-12mm glassBCRD10 Round back 10-12mm glass
BCFS8 Flat back 8-10mm glassBCRS8 Round back 8-10mm glass
BCFS10 Flat back 10-12mm glassBCRS10 Round back 10-12mm glass
BCFD6 Flat back 6-8mm glassBCRD6 Round back 6-8mm glass
56
55
B20
CALL: (09) 624-1180www.euroglass.co.nz
BALUSTRADE & POOL:VIENNA HYDRAULIC HINGES
EH1NHO Glass to wall hydraulic hinge
AVAILABLE FINISHES• Polished stainless steel, marine grade 316
TECHNICAL DETAILS
Made from aluminium and stainless steel Hinge opening angle 100˚Self-closing from any angleAvailable as non-hold open (for pool environments) and hold open (doors)Non-hold open has an offset closed position to hold the gate or door firmly shut, preventing rattleMaximum recommended glass weight: 70kgMaximum recommended door width: 900mmStandard for 12mm glass, can be supplied for 10mm or 15mm glass on requestScrew on each pivot block adjusts hydraulic closing speed
EH1LNHO Glass to wall hydraulic hinge, offset
AVAILABLE FINISHES• Polished stainless steel, marine grade 316
TECHNICAL DETAILS
Made from aluminium and stainless steelHinge opening angle 100˚Self-closing from any angleAvailable as non-hold open (for pool environments) and hold open (doors)Non-hold open has an offset closed position to hold the gate or door firmly shut, preventing rattleMaximum recommended glass weight: 70kgMaximum recommended door width: 900mmStandard for 12mm glass, can be supplied for 10mm or 15mm glass on requestScrew on each pivot block adjusts hydraulic closing speed
EH2NHO Glass to glass hydraulic hinge
AVAILABLE FINISHES• Polished stainless steel, marine grade 316
TECHNICAL DETAILS
Made from aluminium and stainless steelHinge opening angle 100˚Self-closing from any angleAvailable as non-hold open (for pool environments) and hold open (doors)Non-hold open has an offset closed position to hold the gate or door firmly shut, preventing rattleMaximum recommended glass weight; 70kgMaximum recommended door width; 900mmStandard for 12mm glass, can be supplied for 10mm or 15mm glass on requestScrew on each pivot block adjusts hydraulic closing speed
B21
CALL: (09) 624-1180www.euroglass.co.nz
78
84
R 13
R 5
50
Glass cut-out detail
563
120
909
24
11.5
HYDRAULIC HINGEWITH "L" WALL MOUNTING PLATE
This drawing remainsthe property of
Euroglass Systems Ltd
COPYRIGHT 2010
6
563
120
90
9
24
11.5
HYDRAULIC HINGEWITH "L" WALL MOUNTING PLATE
This drawing remainsthe property of
Euroglass Systems Ltd
COPYRIGHT 2010
11.55 63
45
120
90
BALUSTRADE & POOL:VIENNA POOL GATE LATCHES(Profile & finish to complement hydraulic hinge)
EHPL1 Gate latch and strike
AVAILABLE FINISHES• Polished stainless steel, marine grade 316
TECHNICAL DETAILSDesigned for a frameless glass pool gate that closes to a post or wallSingle action, self-latching magnetic operationManufactured in aluminium and stainless steelStandard for 12mm glass, can be supplied for 10mm or 15mm glass on request
EHPL1RP Round Post Gate latch and strike
AVAILABLE FINISHES• Polished stainless steel, marine grade 316
TECHNICAL DETAILSDesigned for a frameless glass pool gate 50mm dia. post mountSingle action, self-latching magnetic operationManufactured in aluminium and stainless steelStandard for 12mm glass, can be supplied for 10mm or 15mm glass on request
Made to order only
EHPL2 Gate latch and keeper
AVAILABLE FINISHES• Polished stainless steel, marine grade 316
TECHNICAL DETAILSDesigned for a frameless glass pool gate and side panelSingle action, self-latching magnetic operationManufactured in aluminium and stainless steelStandard for 12mm glass, can be supplied for 10mm or 15mm glass on request
EHPL290 Gate latch and keeper
AVAILABLE FINISHES• Polished stainless steel, marine grade 316
TECHNICAL DETAILSDesigned for a frameless glass pool gate that closes to a side panel at 90˚Single action, self-latching magnetic operationManufactured in aluminium and stainless steelStandard for 12mm glass, can be supplied for 10mm or 15mm glass on request
B22
CALL: (09) 624-1180www.euroglass.co.nz
Ø12
Gate Panel
Ø12ø16 ø16
Glass Preparation
Glass Preparation
3333
66
5
105mm
Glass Preparation
50mm
Gate Panel
ø1666
33
150 min
Return/Post
8
Gate Panel
ø1666
33
150 min
Return/Post
5
100mm
100mm
38mm
50mm
38mm
100mm
150 min
Side ViewTop View
ø16
66
Glass Preparation
50mm
100mm
BALUSTRADE & POOL:PIVOTS
FPF790 Europool top pivot arm 90˚
AVAILABLE FINISHES• Polished stainless steel• Satin stainless steel
TECHNICAL DETAILSDesigned for mounting a glass gate to a glass balustradeUsed in conjunction with HPT20/HPT10 top patch fittings that allows them to work as a top pivot setFrameless glass mountingManufactured in 316 stainless steel
HPT20PG Top fitting to suit pool gate pivots
AVAILABLE FINISHES• Polished stainless steel• Satin stainless steel
TECHNICAL DETAILSTop patch fitting suitable for Euroglass pool gate fittings: FPF5/FPF6/FPF7 and FPF790/FPF8Adjustable pivot insertFeatures concealing cover plates
B23
CALL: (09) 624-1180www.euroglass.co.nz
106mm
30mm
FPF790Lleft hand
91mm
167mm
30mm
FPF790Rright hand
167mm
91mm
106mm
161
148
6836 37
2055 R 80
31mm
166mm52mm
ASSSEMBLY (rh)
DOORRETURN PANEL
CABANA SLIDING BALUSTRADE BALCONY SCREEN
CABANA is the overall solution for balcony glazing.The CABANA system is a practical solution for protection against wind and rain.CABANA creates the perfect out door living environment on your balcony so you can enjoy the outdoors all year round.
CABANASLIDING DOOR SYSTEMS:
FEATURESA simple dual purpose system that provides protection from falling and shelter from the weather.
Quick and easy installation.
Cylinder push locks ensure additional protection.
Can be used with multiple sliding doors for wide openings.
Additional visual effects can be achieved by using Frosted, Coloured or DigiPrinted glass.
Small gaps between sliding glass panels can be filled with no obtrusive seals.
APPLICATIONS - Out door living environments - Residential & Commercial use - For use on balconies that require shelter from the weather and protection from falling.
TECHNICAL DETAILDesigned to take the following glass thicknesses; - Balustrade infill panels; 12mm to 17.5mm - Sliding door panels; 10mm to 13.5mm
Each sliding door can take a weight up to 100kgs
CABANA sliding door system and balustrade infill panels are attached to a floor mounted structural steel frame.
FINISHESNatural satin anodised aluminium Custom powder coat colour
B24
CALL: (09) 624-1180www.euroglass.co.nz
CABANA SLIDING BALUSTRADE BALCONY SCREEN
Door Configuration
CABANASLIDING DOOR SYSTEMS:
Door Configuration
3 Doors WideDoors can be handed left or right
6 Doors WideDoors can be handed left or right
B25
CALL: (09) 624-1180www.euroglass.co.nz
Top Related