Atlas Copco Screwdrivers Securing productivity from 0.005 Nm
0.005 Nm
0.1 Nm
1 Nm
5 Nm
0.010 Nm
12 Nm
0.5 Nm
2 AT L A S C O P C O S C R E W D R I V E R S
Contents
Introducing five levels of functionality
Level 1. Torque controln LUM pneumatic screwdrivern EBL Standard electric brushless screwdrivern BCP Battery clutch screwdriver
Level 2. Batch count + Torque control n EBL Advanced electric brushless screwdriver
Level 3. Joint control + Batch count + Torque controln Tensor DL electric screwdriver n MicroTorque TM electric screwdriver
Level 4. Critical fastening + Joint control+ Batch count + Torque controln Tensor SL electric screwdrivern MicroTorqueTM electric screwdriver
Level 5. Zero fault fasteningn ToolsNet PF n ToolsTalk MT Net
Technical data, ordering numbers and accessories
Screwdriver bits
Vibration and noise emission values
4 – 5
6 – 9
10 – 13
14 – 17
18 – 21
22 – 23
24 – 37
38 – 42
43
AT L A S C O P C O S C R E W D R I V E R S 3
For every low-torque assembly need, the Atlas Copco screwdriver range range has a solution – from ultra-low torque timepiece assembly to industrial scale electronics production. The range features inno vative technology and advanced control capabilities, combined with unrivalled ergonomics.
Level 5: Zero fault fastening
You need zero fault fastening plus level 4 functionality.
Functionality
LEVEL 1
LEVEL 2
Level 4: Critical fastening
You need critical fastening plus level 3 functionality.
Level 3: Joint control
You need fastening that ensures joint integrity, plus level 2 functionality.
Level 2: Batch count
You need to know that every screw has been fastened, plus level 1 functionality.
Level 1: Torque control
You need precision fastening, cycle after cycle. Torque must be accurate and consistent.
Leve
ls
Five levels of functionality
4 AT L A S C O P C O S C R E W D R I V E R S
Functionality
LEVEL 2
LEVEL 3
LEVEL 4
LEVEL 5
AT L A S C O P C O S C R E W D R I V E R S 5
The EBL electric screwdriver is in line with Atlas Copco’s reputation. With this tool I get a significant process improvement, thanks to the improved quality of the fastening. This is a result of the better torque accuracy and consistency. The EBL will also increase productivity be-cause it is light, very easy to handle and more comfortable to use.
Mr Jesus Reyes, Project Engineer, Valeo Mexico.
6 AT L A S C O P C O S C R E W D R I V E R S
LEVEL 1 – TORQUE cONTROL
Functionality level 1g Torque control
Accurate and consistent torque control reduces customer warranty claims and production costs, improves productiv-ity and minimizes production line downtime.
Problem:Repetitive stress injuries and fatigue.Solution:Screwdrivers with fast clutch release, ergonomic design and soft, warm grips for optimum operator comfort.
Problem:High noise levels in the working environment. Solution: EBL screwdriver – quiet operation thanks to brushless motor.
Problem:Damage to plastic threads and delicate components.Solution: The Atlas Copco soft-stop feature reduces the shock levels transmitted to delicate joints during the tightening cycle.
Problem:High running costs for tools.Solution:Tools designed to last for many years with low service and maintenance costs.
For industrial assembly operations, accurate fastening and productivity go hand-in-hand. The application of accurate and consistent torque on high-volume production applications is crucial to efficient assembly.
AT L A S C O P C O S C R E W D R I V E R S 7
LUM/LTV pneumaticscrewdrivers
• From 0.025 to 15.5 Nm
• Rapid shut-off
• Low reaction impulse
• Low noise level
• Operator comfort
• Lubrication-free
• Soft stop options
• Vacuum pick up accessories for LUM 02
• ESD approved
For technical data, see pages 24 – 27
EBL standard electricbrushless screwdrivers
• From 0.05 to 4.5 Nm
• Rapid shut-off
• Brushless motor – longer lifespan
• Low noise level
• Unique non-tamper torque setting
• Lever start or push start
• Vacuum pick-up accessories
• Soft stop versions
• ESD and UL approved
For technical data, see pages 28 – 29
BCP battery clutchscrewdrivers
• From 0.8 to 12 Nm
• Ergonomic pistol-grip design
• 7 brushless models offering variable speed with a speed setting unit
• Choice of two 18 V Li-Ion batteries:
1.3 Ah Flat Pack or 2.6 Ah Big Pack
• Light in front to illuminate work piece
• Torque OK/NOK light with optional buzzer
• Battery can be mounted in two directions
• Low noise level
For technical data, see pages 30
Assembly needs:
You need precision fastening, cycle after cycle.
Torque must be accurate and consistent.
Atlas Copco screwdriver solutions:
LUM, LTV, EBL and BCP.
ESD certification guarantees against damage of electronic com-ponents by an uncontrolled electrostatic discharge (ESD) from the tools. In practice it certifies that at no point will the material of the equipment hold an electrostatic potential above 100 V for more than 2 seconds.
8 AT L A S C O P C O S C R E W D R I V E R S
LEVEL 1 – TORQUE cONTROL
AT L A S C O P C O S C R E W D R I V E R S 9
EBL screwdrivers had the function-ality we needed when we built our new LCD assembly lines. Durability, quiet operation and batch count capabilities – in combination with line control – made the screwdriver the ideal choice, making sure we never miss a screw.
Mr Marek Blaha, LCD Production Division General Manager, Sony Slovakia.
10 AT L A S C O P C O S C R E W D R I V E R S
...4 Batch OK
...3...
...2...
1...
LEVEL 2 – BATcH cOUNT
Functionality level 2g Batch count + Torque control
Eliminate the problem of missing screws with batch count functionality. Complex fasten-ing regimes with multiple screws and high-speed production can lead to missed screws and compromised quality.
Screw counting
counting?
Eliminate the problem straight out of the box with theAtlas Copco EBL advanced electric brushless screwdriver.
Get it right the first time round with batch count and line control functionality.
Problem: On fast moving assembly lines, operators can miss screws.Solution: Screw counting capability with operator feedback signal.
Problem: Operator needs to paint every screw in order to check each one is fastened.Solution: Screw counting function and line control capability. When all the screws are in place, the screwdriver sends a signal to the line and next batch arrives.
Does your production process require screw
AT L A S C O P C O S C R E W D R I V E R S 11
RE Drive
• Batch count functionality
• Tightening cycle time programming
• I/O digital signals for line control
EBL – advanced electric brushless screwdriver
• From 0.05 to 4.5 Nm
• Rapid shut-off
• Brushless motor – longer lifespan
• Low noise levels
• Unique non-tamper torque setting
• Lever start or push start
• Vacuum pick-up accessories
• Soft stop versions
• Reporting models
• ESD and UL approved
For technical data, see pages 28 – 29
Assembly needs:
You need precision fastening, cycle after cycle. Torque must be accurate and consistent. You also need batch count functionality.
Atlas Copco screwdriver solution:
EBL – advanced electric brushless screwdriver.
ESD certification guarantees against damage of electronic com-ponents by an uncontrolled electrostatic discharge (ESD) from the tools. In practice it certifies that at no point will the material of the equipment hold an electrostatic potential above 100 V for more than 2 seconds.
1 2 AT L A S C O P C O S C R E W D R I V E R S
LEVEL 2 – BATcH cOUNT
AT L A S C O P C O S C R E W D R I V E R S 13
We need to identify that operators correctly install the screws in one of our critical products. The Micro-Torque’s angle control functional-ity is amazingly precise and has helped us to reduce scrapped parts. Additionally, the robust design of the screwdriver makes it the most durable we have ever had.
Mr Sam ZhaoEquipment MaintenanceManager Schneider Electric, China.
14 AT L A S C O P C O S C R E W D R I V E R S
LEVEL 3 – JOINT cONTROL
Functionality level 3g Joint control + Batch count + Torque control
Complex assembly, requiring multiple torque settings within the same cycle sequence, can be time consuming to execute correctly.
Do it automatically with level 3 functionality – torque set-tings change sequentially, eliminating operator errors – while process control detects cross-threaded joints and angle control eliminates assembly errors.
Problem:Cross-threading of joints.Solution:Detection of cross-threading by controlling the torque level during the rundown stage of the tightening cycle.
Problem:Stripped screw in sensitive plastics.Solution: Programmable speed in the second stage of the tightening.
Problem:Wrong screw in the wrong place.Solution: By programming the angle according to the screw length the system detects if the screw is installed in the right place, and gives opera tor feedback.
Problem:Several tools required for different types of joint.Solution: Use one tool that can be programmed to handle different torque settings.
AT L A S C O P C O S C R E W D R I V E R S 15
MicroTorque ETD M-ABL Ergo electric screwdrivers
• From 0.1 to 0.8 Nm
• Lever start or push start
• Prepared for vacuum pick-up
• Angle encoder
For technical data, see pages 35 – 37
Assembly needs:
You need precision fastening, cycle after cycle. Torque must be accurate and consistent, batch count and securing the joint are also essential.
Atlas Copco screwdriver solutions:
Tensor DL and MicroTorque TM.
MicroTorque ETD M 27 ABL electric screwdrivers
• From 0.075 to 0.27 Nm
• Prepared for vacuum pick-up
• Angle encoder
MicroTorque controller
• One to eight tightening steps
• Up to 32 parameter sets
• Line control
• LED display
• Configurable display
• Compact controller
• Up to 10 tightening sequences
For technical data, see pages 35 – 37
ESD certification guarantees against damage of electronic com-ponents by an uncontrolled electrostatic discharge (ESD) from the tools. In practice it certifies that at no point will the material of the equipment hold an electrostatic potential above 100 V for more than 2 seconds.
Tensor DL electric screwdriver
• From 0.3 to 12 Nm
• Lever start or push start
• Ergonomics design
• Signal lights
• Front lights
• ESD approved
Tensor DL advanced controller
• Up to 10 parameter sets
• Tool service indicator
• LED display
• Line control
• Autoset
For technical data, see page 32
16 AT L A S C O P C O S C R E W D R I V E R S
LEVEL 3 – JOINT cONTROL
AT L A S C O P C O S C R E W D R I V E R S 17
In order to maintain our competitive-ness and achieve better assembly quality, we installed four fixtured Micro Torque screwdrivers. Working as multiple spindles within one auto-mated assembly station, we signifi-cantly increased productivity and by detecting common assembly prob-lems, we now have documentable process control.
Mr Luis Marques, Manufacturing Engineer, Visteon Portugal.
18 AT L A S C O P C O S C R E W D R I V E R S
Functionality level 4g Critical fastening + Joint control + Batch count + Torque control
For the most demanding fastening scenarios, the Atlas Copco screwdriver range offers tools for performing safety and mission-critical assembly.
LEVEL 4 – cRITIcAL FASTENING
Capable of handling multiple parameter sets sequentially, producing detailed information for tightening analysis and allowing full traceability, these transducerized tools repre-sent state-of-the-art control and precision.
Problem: Operator has to use a click wrench after tightening to check fastening is correct.Solution: Using a high-accuracy screwdriver eliminates the need to use a click wrench.
Problem: The assembly of safety-critical components needs to be operator independant.Solution: Transducerized screwdrivers deliver the highest level of accuracy and allow comprehensive data collection.
Problem: Assembling safety-critical or delicate plastic components requires the highest level of tightening accuracy.Solution: Choose an Atlas Copco transducerized screw- driver – the only type of screwdriver that can perform repeated fastening with industry- leading accuracy.
Problem: Need to increase cycle rate – automation.Solution: Use fixtured tools, controllers equipped with I/O bus and network integration.
AT L A S C O P C O S C R E W D R I V E R S 19
MicroTorque ETF MT electric screwdriver
• From 0.005 to 5 Nm
• Fixtured screwdriver
• Built-in angle encoder
• Longer durability
MicroTorque controller
• One to eight tightening steps
• Up to 16 parameter sets
• Line control
• LED display
• Configurable display
• Compact controller
• Up to 10 tightening sequences
For technical data, see page 35 – 37
Tensor SL electric screwdriver
• From 0.3 to 12 Nm
• Lever start or push start
• Ergonomic design
• Signal lights and buzzer
• Front lights
• ESD approved
Tensor SL controller
• Up to 250 parameter sets
• Tightening status storage: 5000
• Up to 99 jobs
• Cell programming
• Logic configurator
• Graph model with color display
For technical data, see page 33 – 34
Assembly needs:
You need precision fastening, cycle after cycle. Torque must be accurate and consistent, batch count and securing the joint are also essential. In addition you need to ensure critical fastening.
Atlas Copco screwdriver solutions:
Tensor SL and MicroTorqueTM ETF MT.
ESD certification guarantees against damage of electronic com-ponents by an uncontrolled electrostatic discharge (ESD) from the tools. In practice it certifies that at no point will the material of the equipment hold an electrostatic potential above 100 V for more than 2 seconds.
2 0 AT L A S C O P C O S C R E W D R I V E R S
LEVEL 4 – cRITIcAL FASTENING
AT L A S C O P C O S C R E W D R I V E R S 21
Visualization of the assembly se-quence makes work much easier, pre-vents production errors and improves product quality. We like using Atlas Copco electric screwdrivers. With Tensor tools we are always in full control of the tightening processes.
Mr Gerhard Visser, Manager, Pilot Production, Lenze Drive Systems GmbH, Aerzen, Germany
2 2 AT L A S C O P C O S C R E W D R I V E R S
Functionality level 5g Zero fault fastening
Zero fault fastening is now easily achievable thanks to Atlas Copco’s ToolsNet software. Centralized trend monitoring of production line data allows problem areas to be identified and processes to be streamlined.
ToolsTalk MT Net
Data collection software for the MT screwdriver range.
LEVEL 5 – ZERO FAULT FASTENING
Real-time data collection and analysis allows adjust-ments to be made directly to the production process. The system allows full traceability and auditing, allowing compliance with the most challenging quality control pro-grammes.
Take full control with ToolsNet
• Collect data for process improvement• Access historical data and statistics • Historical and real-time data presentation• Full process traceability
Traceability minimizes recall costs
Data can be presented historically or in real-time and shift reports are easily generated to satisfy production managers.
In the event of warranty recalls, the result database provides access to critical information which can easily minimize the extent of any recall leading to an overnight payback on your investment.
ToolsNet PF W10
Data collection software for the Tensor SL screwdriver.
AT L A S C O P C O S C R E W D R I V E R S 23
LUM Pneumatic Screwdrivers Pistol grip shut-off models
Pistol grip Balanced pistol grip Multiple air inlet
Model
TorquerangeSoftjoint Free
speedr/min
Airconsumptionat
freespeed WeightLength
mm
Airinlet
threadin
Distancecentretoside
mm OrderingNo.Nminlb l/scfm kgIb
Pistolgripmodelswithtriggerstart
LUM22 HR3 0.6 - 3 5.3 - 26.5 2200 7.5 16 0.85 1.9 186 1/4 18 8431 0269 00
LUM22 HR3-RE 0.6 - 3 5.3 - 26.5 2200 7.5 16 0.85 1.9 186 1/4 18 8431 0278 63
LUM22 HR4 0.6 - 4 5.3 - 35.4 1650 7.5 16 0.85 1.9 186 1/4 18 8431 0269 02
LUM22 HR4-RE 0.6 - 4 5.3 - 35.4 1650 7.5 16 0.85 1.9 186 1/4 18 8431 0278 65
LUM22 HR6 1.5 - 6.5 13.3 - 57.5 1150 7.5 16 0.85 1.9 186 1/4 18 8431 0269 01
LUM22 HR6-RE 1.5 - 6.5 13.3 - 57.5 1150 7.5 16 0.85 1.9 186 1/4 18 8431 0278 64
Pistolgripmodelswithtriggerandpushstart
LUM22 HR3-P 0.6 - 3 5.3 - 26.5 2200 7.5 16 0.85 1.9 186 1/4 21 8431 0269 06
LUM22 HR4-P 0.6 - 4 5.3 - 35.4 1650 7.5 16 0.85 1.9 186 1/4 21 8431 0269 08
LUM22 HR6-P 1.5 - 6.5 13.3 - 57.5 1150 7.5 16 0.85 1.9 186 1/4 21 8431 0269 07
LUM22 HR10-P 3.5 - 10 31 - 88.5 750 7.5 16 1 2.2 218 1/4 21 8431 0269 09
Balancedpistolgripmodelswithtriggerstart
LUM12 HRX1 0.6 - 1.8 5.3 - 15.9 2300 6 13 0.65 1.4 176 1/8 15 8431 0278 58
LUM12 HRX1-RE 0.6 - 1.8 5.3 - 15.9 2300 6 13 0.65 1.4 176 1/8 16 8431 0278 59
LUM12 HRX2 0.6 - 2.5 5.3 - 22.1 1650 6 13 0.65 1.4 176 1/8 16 8431 0278 56
LUM12 HRX2-RE 0.6 - 2.5 5.3 - 22.1 1650 6 13 0.65 1.4 176 1/8 16 8431 0278 57
LUM12 HRX3 0.4 - 3.5 5.3 - 31.9 1150 6 13 0.7 1.5 186 1/8 16 8431 0278 54
LUM12 HRX3-RE 0.4 - 3.5 3.5 - 31.9 1150 6 13 0.7 1.5 186 1/8 16 8431 0278 55
LUM12 HRX5 0.4 - 5 3.5 - 44.2 850 6 13 0.7 1.5 186 1/8 16 8431 0278 51
LUM12 HRX5-RE 0.4 - 5 3.5 - 44.2 850 6 13 0.7 1.5 186 1/8 16 8431 0278 53
LUM12 HRX5-170 0.4 - 5 3.5 - 44.2 170 6 13 0.7 1.5 196 1/8 16 8431 0278 47
LUM12 HRX5-350 0.4 - 5 3.5 - 44.2 350 6 13 0.7 1.5 186 1/8 16 8431 0278 48
LUM12 HRX5-350-RE 0.4 - 5 3.5 - 44.2 350 6 13 0.7 1.5 186 1/8 16 8431 0278 49
LUM12 HRX8 1.5 - 8 13.3 - 70.8 500 6 13 0.7 1.5 186 1/8 16 8431 0278 60
LUM12 HRX8-RE 1.5 - 8 13.3 - 70.8 500 6 13 0.7 1.5 186 1/8 16 8431 0278 61
LUM12 HRX8-50 1.5 - 8 13.3 - 70.8 50 6 13 0.7 1.5 196 1/8 16 8431 0280 25
LUM12 HRX8-110 1.5 - 8 13.3 - 70.8 110 6 13 0.7 1.5 196 1/8 16 8431 0280 27
LUM22 HRX2 1.2 - 2a 10.6 - 17.7 4500 9 19 0.9 2 187 1/4 18 8431 0269 29
LUM22 HRX2-3200 1.1 - 2.6a 9.7 - 23 3200 9 19 0,9 2 187 1/4 18 8431 0278 85
LUM22 HRX3 0.6 - 3a 5.3 - 26.5 2250 9 19 0.9 2 187 1/4 18 8431 0269 22
LUM22 HRX3-RE 0.6 - 3a 5.3 - 26.5 2250 9 19 0.9 2 187 1/4 18 8431 0278 70
LUM22 HRX4 0.6 - 4a 5.3 - 35.4 1650 9 19 0.9 2 187 1/4 18 8431 0269 20
LUM22 HRX6 1.5 - 6.5a 13.3 - 57.5 1100 9 19 0.95 2.1 197 1/4 18 8431 0269 21
LUM22 HRX6-RE 1.5 - 6.5a 13.3 - 57.5 1100 9 19 0.95 2.1 197 1/4 18 8431 0278 71
Balancedgripmodelswithtriggerstartandsoftstopfunction
LUM10 HRX1-SS 0.2 - 0.6 1.8 - 5.3 800 6 13 0.65 1.4 176 1/8 16 8431 0280 02
LUM12 HRX1-SS 0.6 - 1.3 5.3 - 11.5 800 6 13 0.65 1.5 176 1/8 16 8431 0280 01
Multipleairinletmodelsandair-on-topmodelswithtriggerstart
LUM12 HRF2 0.6 - 2.5 5.3 - 22.1 1650 6 13 0.65 1.4 190 1/8 16 8431 0269 31
LUM12 HRF3 0.4 - 3.6 3.5 - 31.9 1150 6 13 0.7 1.5 200 1/8 16 8431 0269 32
LUM12 HRF5 0.4 - 5 3.5 - 44.2 850 6 13 0.7 1.5 200 1/8 16 8431 0269 33
LUM12 HRF8 1.5 - 8 13.3 - 70.8 500 6 13 0.7 1.5 200 1/8 16 8431 0269 34a 1.4 - 4 Nm with spring, Ordering No. 4210 1831 00. Recommended hose size mm: LUM10/12/21 = 6, LUM22/25 = 8, LUM22 HR/HRX10 = 10
All models: Are reversible and have quick change chuck. All data at an air pressure of 6.3 bar. For operator comfort support handle recommended for high torque, see Optional Accessories.
2 4 AT L A S C O P C O S C R E W D R I V E R S
LUM Pneumatic ScrewdriversStraight shut-off models
Straight models with push start Straight models with lever start
Model
TorquerangeSoftjoint Free
speedr/min
Airconsumptionat
freespeed WeightLength
mm
Airinlet
threadin
Distancecentretoside
mmDrivetype OrderingNo.Nminlb l/scfm kgIb
Straightmodelswithpushstartandbuttonreverse
LUM 02 PR04-1800 0.03 - 0.32 0.027 - 0.29 1800 2.2 4.7 0.16 0.35 165 * 10 4 mm HM 8431 0146 02
LUM 02 PR04-1200 0.03 - 0.32 0.027 - 0.29 1200 2.2 4.7 0.16 0.35 165 * 10 4 mm HM 8431 0146 04
LUM 02 PR07-500 0.025 - 0.6 0.023 - 0.54 500 2.2 4.7 0.16 0.35 165 * 10 4 mm HM 8431 0146 06
LUM 02 PR07-350 0.025 - 0.6 0.023 - 0.54 350 2.2 4.7 0.16 0.35 165 * 10 4 mm HM 8431 0146 08
LUM 02 PR04-1800-Q 0.03 - 0.32 0.027 - 0.29 1800 2.2 4.7 0.16 0.35 165 * 10 3 mm Hex 8431 0146 12
LUM 02 PR04-1200-Q 0.03 - 0.32 0.027 - 0.29 1200 2.2 4.7 0.16 0.35 165 * 10 3 mm Hex 8431 0146 14
LUM 02 PR07-500-Q 0.025 - 0.6 0.023 - 0.54 500 2.2 4.7 0.16 0.35 165 * 10 3 mm Hex 8431 0146 16
LUM 02 PR07-350-Q 0.025 - 0.6 0.023 - 0.54 350 2.2 4.7 0.16 0.35 165 * 10 3 mm Hex 8431 0146 18
LUM10 PR03 0.1 - 1.5 0.8 - 13 300 3 6 0.4 0.9 206 1/8 15 1/4 Hex 8431 0146 05
LUM10 PR05 0.1 - 1.5 0.8 - 13 460 3 6 0.4 0.9 206 1/8 15 1/4 Hex 8431 0146 09
LUM10 PR12 0.1 - 1.1 0.8 - 10 1200 3 6 0.4 0.9 196 1/8 15 1/4 Hex 8431 0146 17
LUM10 PR21 0.1 - 0.7 0.8 - 6 2000 3 6 0.4 0.9 196 1/8 15 1/4 Hex 8431 0146 25
LUM12 PR1 0.6 - 1.6 5.3 - 14.2 1900 4.5 10 0.55 1.2 195 1/8 15 1/4 Hex 8431 0278 29
LUM12 PR2 0.4 - 2.3 3.5 - 20.4 1450 4.5 10 0.55 1.2 195 1/8 15 1/4 Hex 8431 0278 27
LUM12 PR3 0.4 - 3.2 3.5 - 28.3 1000 4.5 10 0.55 1.2 195 1/8 15 1/4 Hex 8431 0278 26
LUM12 PR4 0.4 - 4.2 3.5 - 37.2 750 4.5 10 0.55 1.2 195 1/8 15 1/4 Hex 8431 0278 25
LUM12 PR5 0.4 - 5 3.5 - 44.2 450 4.5 10 0.55 1.2 195 1/8 15 1/4 Hex 8431 0278 30
LUM22 PR2-3500 1.1 - 2.5 9.7 - 22.1 3500 7 15 0.75 1.7 211 1/4 15 1/4 Hex 8431 0278 89
LUM22 PR3 0.6 - 3.2 5.3 - 28.3 2100 7 15 0.75 1.7 211 1/4 15 1/4 Hex 8431 0269 61
LUM22 PR4 0.5 - 4.0 4.4 - 35.4 1600 7 15 0.75 1.7 211 1/4 15 1/4 Hex 8431 0269 55
LUM22 PR4-2300 0.7 - 4.5 5.9 - 38.2 2300 7 15 0.75 1.7 211 1/4 15 1/4 Hex 8431 0278 81
LUM22 PR5-350 0.4 - 5.0 3.5 - 44.2 350 7 15 0.75 1.7 211 1/4 15 1/4 Hex 8431 0269 60
LUM22 PR6 1.5 - 6.0 13.3 - 53.1 1000 7 15 0.75 1.7 211 1/4 15 1/4 Hex 8431 0269 56
LUM22 PR8-1100 1.5 - 8.0 13.3 - 70.8 1100 7 15 0.9 2.0 224 1/4 15 1/4 Hex 8431 0278 88
Straightmodelswithpushstart,buttonreverseandsoftstopfunction
LUM10 PR1-SS 0.2 - 0.6 1.8 - 5.3 460 3 6 0.4 0.9 206 1/8 15 1/4 Hex 8431 0280 06
LUM12 PR1-SS 0.6 - 1.3 5.3 - 11.5 800 4.5 10 0.55 1.2 195 1/8 15 1/4 Hex 8431 0280 05
Straightmodelswithleverstartandwithoutpushstart
LUM12 SR1 0.6 - 1.8 5.3 - 15.9 2200 6 13 0.6 1.3 217 1/8 15 1/4 Hex 8431 0278 35
LUM12 SR2 0.5 - 2.5 4.4 - 22.1 1700 6 13 0.6 1.3 217 1/8 15 1/4 Hex 8431 0278 34
LUM12 SR3 0.4 - 3.5 3.5 - 31 1200 6 13 0.6 1.3 217 1/8 15 1/4 Hex 8431 0278 33
LUM12 SR4 0.4 - 4.5 3.5 - 39.8 850 6 13 0.6 1.3 217 1/8 15 1/4 Hex 8431 0278 32
LUM22 SR3 0.6 - 3.2 5.3 - 28.3 1950 7 15 0.8 1.8 239 1/4 16 1/4 Hex 8431 0269 44
LUM22 SR4 0.6 - 4 5.3 - 35.4 1500 7 15 0.8 1.8 239 1/4 16 1/4 Hex 8431 0269 46
LUM22 SR5-300 0.4 - 5 3.5 - 44.2 300 7 15 0.8 1.8 239 1/4 16 1/4 Hex 8431 0269 51
LUM22 SR6 1.5 - 6 13.3 - 53.1 1000 7 15 0.85 1.9 239 1/4 16 1/4 Hex 8431 0269 47
TEcHNIcAL DATA / AccESSORIES
a Front end 12.5 mm (4210 3918 01) included.b Optional front end 21 mm (4210 3918 02).
Recommended hose size mm: LUM10/12/21 = 6, LUM22 = 8, LUM37 = 10
ESD approved: LUM 10/21/12/22 SR/PR
All models are reversible and have quick change chuck.
SR-models have ring reverse control.
PR-models have push button reverse.b Air inlet thread M5. Nipple and coupling included accessory for all LUM 02 models, hose size diameter 6 mm.
AT L A S C O P C O S C R E W D R I V E R S 25
Model
TorquerangeSoftjoint Free
speedr/min
Airconsumptionat
freespeed WeightLength
mm
Airinlet
threadin
Angleheadcentretoside
mm
Anglehead
heightmm OrderingNo.Nminlb l/scfm kgIb
Shut-offanglemodels
LTV009 R025-Q 0.6 - 2.5 5.3 - 22.1 1650 6 13 0.7 1.5 266 1/8 9 25 8431 0278 00
LTV009 R025-42 0.6 - 2.5 5.3 - 22.1 1650 6 13 0.7 1.5 266 1/8 9 25 8431 0278 01
LTV009 R025-6 0.6 - 2.5 5.3 - 22.1 1650 6 13 0.7 1.5 266 1/8 9 25 8431 0278 02
LTV009 R03-10 0.7 - 3 6.2 - 26.5 1400 6 13 0.7 1.5 266 1/8 9 25 8431 0278 23
LTV009 R035-Q 0.4 - 3.5 3.5 - 31 1100 6 13 0.7 1.5 266 1/8 9 25 8431 0278 03
LTV009 R035-42 0.4 - 3.5 3.5 - 31 1100 6 13 0.7 1.5 266 1/8 9 25 8431 0278 04
LTV009 R035-6 0.4 - 3.5 3.5 - 31 1100 6 13 0.7 1.5 266 1/8 9 25 8431 0278 05
LTV009 R05-Q 0.4 - 5 3.5 - 44.2 850 6 13 0.7 1.5 266 1/8 9 25 8431 0278 06
LTV009 R05-42 0.4 - 5 3.5 - 44.2 850 6 13 0.7 1.5 266 1/8 9 25 8431 0278 07
LTV009 R05-6 0.4 - 5 3.5 - 44.2 850 6 13 0.7 1.5 266 1/8 9 25 8431 0278 08
LTV009 R07-Q 1.1 - 7 9.7 - 61.9 500 6 13 0.7 1.5 266 1/8 9 25 8431 0278 09
LTV009 R07-42 1.1 - 7 9.7 - 61.9 500 6 13 0.7 1.5 266 1/8 9 25 8431 0278 10
LTV009 R07-6 1.1 - 7 9.7 - 61.9 500 6 13 0.7 1.5 266 1/8 11 28.5 8431 0278 11
LTV009 R08-6-200 1.3 - 9 11.5 - 79.6 200 6 13 0.7 1.5 266 1/8 11 28.5 8431 0278 24
LTV009 R09-Q 1.3 - 9 11.5 - 79.6 430 6 13 0.7 1.5 266 1/8 11 28.5 8431 0278 12
LTV009 R09-10 1.3 - 9 11.5 - 79.6 430 6 13 0.7 1.5 266 1/8 11 28.5 8431 0278 13
LTV009 R09-42 1.3 - 9 11.5 - 79.6 430 6 13 0.7 1.5 266 1/8 11 28.5 8431 0278 15
LTV009 R09-42M 1.3 - 9 11.5 - 79.6 430 6 13 0.7 1.5 266 1/8 11 28.5 8431 0278 16
LTV009 R09-6 1.3 - 9 11.5 - 79.6 430 6 13 0.7 1.5 266 1/8 11 28.5 8431 0278 17
LTV009 R11-Q 1.3 - 11 11.5 - 97.3 320 6 13 0.8 1.8 266 1/8 11 28.5 8431 0278 19
LTV009 R11-10 1.3 - 11 11.5 - 97.3 320 6 13 0.8 1.8 266 1/8 11 28.5 8431 0278 20
LTV009 R11-42 1.3 - 11 11.5 - 97.3 320 6 13 0.8 1.8 266 1/8 11 28.5 8431 0278 21
LTV009 R11-6 1.3 - 11 11.5 - 97.3 320 6 13 0.8 1.8 266 1/8 11 28.5 8431 0278 22
ESD approved: LTV 009. Recommended hose size mm: LTV009 = 6
All LTV 009 models are ESD approved
All models: Are reversible.
- 42 = 1/4” female hexagon drive for bits.
- 10 = 3/8” square drive.
- 6 = 1/4” square drive for sockets.
- Q = 1/4” quick change chuck.
LTV Pneumatic ScrewdriversAngle head models
Angle head
2 6 AT L A S C O P C O S C R E W D R I V E R S
Accessories – LUM/LTV
Clutch adjustment key
Included with all shut-off and slip clutch tools.
Quick change chuck
Included with all straight and pistol grip tools.
Accessories included
Designation Exhausthose Supporthandle ESDhoseTorquearms
adaptersInstallation
proposalESDapprovedpistolhandle
LUM12 HRX/HRF 4210 2052 00 4110 1355 92 8202 0501 06 – 8202 1180 67 4210 3616 04
LUM22 HR 3, 4, 6 4210 2052 00 4110 1355 92 8202 0501 10 – 8202 1180 77 4210 4337 04
LUM22 HR 10, 12 4210 2052 00 4110 1355 93 8202 0501 10 – 8202 1180 77 4210 4337 04
LUM22 HRX 3, 4, 6 4210 2052 00 4110 1355 92 8202 0501 10 – 8202 1180 77 4210 3616 04
LUM12 SR 4210 2052 00 – 8202 0501 06 4390 1735 52 8202 1180 67 –
LUM12 PR 4210 2052 00 – 8202 0501 06 4390 1735 53 8202 1180 67 –
LUM22 SR 4210 2053 00 – 8202 0501 10 4390 1735 51 8202 1180 77 –
LUM22 PR 4210 2053 00 – 8202 0501 10 4390 1735 54 8202 1180 77 –
LTV009 4210 2052 00 – 8202 0501 06 – 8202 1180 67 –
Service kits
Model OrderingNo.
LUM12 HRX, HRF 4081 0247 90
LUM22 HR/HRX 3, 4, 6, 12 4081 0281 90
LUM22 HR/HRX 10 4081 0282 90
LUM12 SR 4081 0254 90
LUM12 PR 4081 0250 90
LUM22 PR/SR 3, 4, 6, 12 4081 0284 90
LUM22 PR/SR 10 4081 0285 90
LUM10 PR 4081 0070 90
LTV009 4081 0248 90
RE-Conversion kits for LUM/LTV models
Model OrderingNo.
LUM12 HRF 4210 3624 99
LUM12 SR 4210 4137 90
LUM22 SR 4210 2057 80
LTV009 4210 4137 90
TEcHNIcAL DATA / AccESSORIES
Optional accessoriesModel OrderingNo.
Threadedclutchhouses
LUM12 PR/SR 1, 2, 3, 4 4210 4386 04
LUM12 HRX/HRF 1, 3, 5, 8 4210 4386 04
LUM22 HRX/HR 2, 3, 4, 6 4210 4386 04
LUM22 HRX/HR 10, 12 4210 4392 03
LUM22 SR/PR 3, 4, 5, 6 4210 4383 04
LUM22 SR/PR 10, 12 4210 4383 03
VacuumscrewpickupLUM02 4210 4706 80
Angleheadcovers
LTV009 R025-R07 4210 4115 00
LTV009 R08-R11 4210 4116 00
Protectivecovers
LUM22 HR 4210 3150 00
LUM22 HRX 4210 3151 00
LUM12 HRX 4210 3152 00
SuspensionyokeforLTV009 4210 4461 80
Quickchangechuckkit,extrawidediameterforeasyhandling 4210 2326 91
Angle-headforLTV009,90°hexdrivemagneticbitholder* 4210 3857 91
* Substitute for 4210 3857 XX angle heads.
Suspension yoke Quick change chuck kit Angle-head for LTV009 Vacuum screw pick-up
Exhaust hose
Included with straight and air-on-top models.
Hose nipple
Included with all tools.
AT L A S C O P C O S C R E W D R I V E R S 27
EBL Screwdrivers
EBL screwdriver
Type Model
TorqueSpeedr/min
WeightLength
mmBit
drive OrderingNo. DrivetobeusedNcmInIb kgIb
STANDARD
EBL03 0.05 - 0.3 0.4 - 2.7 870 0.3 0.7 185 Wing type 4mm 8431 0170 02
EBL Drive
EBL Drive Plus
EBL RE Drive
ST controller+ EBL Drive
EBL03-Q 0.05 - 0.3 0.4 - 2.7 870 0.3 0.7 185 1/4" Hex 8431 0170 04EBL12 0.2 - 1.2 1.8 - 10.6 910 0.5 1.1 215 1/4" Hex 8431 0170 11EBL12-1500 0.2 - 1.2 1.8 - 10.6 1500 0.5 1.1 215 1/4" Hex 8431 0170 41EBL20 0.5 - 2.0 4.5 - 18 750 0.5 1.1 215 1/4" Hex 8431 0170 16EBL21-1500 0.5 - 2.1 4.5 - 19 1500 0.8 1.8 235 1/4" Hex 8431 0170 43EBL25 1.0 - 2.5 8.8 - 22.1 930 0.8 1.8 235 1/4" Hex 8431 0170 23EBL35 1.0 - 3.5 8.8 - 31 700 0.8 1.8 235 1/4" Hex 8431 0170 33EBL25-1500 a 1.0 - 2.5 8.8 - 22.1 1500 0.8 1.8 235 1/4" Hex 8431 0170 25EBL45 a 1.0 - 4.5 8.8 - 39.8 700 0.8 1.8 235 1/4" Hex 8431 0170 40
SOFT STOP
EBL03-SS 0.05 - 0.3 0.4 - 2.7 870 0.3 0.7 185 Wing type 4mm 8431 0170 07EBL12-SS 0.2 - 1.2 1.8 - 10.6 910 0.5 1.1 215 1/4" Hex 8431 0170 15EBL20-SS 0.5 - 2.0 4.5 - 18 750 0.5 1.1 215 1/4" Hex 8431 0170 20EBL25-SS 1.0 - 2.5 8.8 - 22.1 930 0.8 1.8 235 1/4" Hex 8431 0170 28EBL35-SS 1.0 - 3.5 8.8 - 31 700 0.8 1.8 235 1/4" Hex 8431 0170 38
REPORTING
EBL03-RE 0.05 - 0.3 0.4 - 2.7 870 0.3 0.7 185 Wing type 4mm 8431 0170 55EBL03-Q-RE 0.05 - 0.3 0.4 - 2.7 870 0.3 0.7 185 1/4" Hex 8431 0170 06EBL12-RE 0.2 - 1.2 1.8 - 10.6 910 0.5 1.1 215 1/4" Hex 8431 0170 13EBL12-1500-RE 0.2 - 1.2 1.8 - 10.6 1500 0.5 1.1 215 1/4" Hex 8431 0170 18EBL20-RE 0.5 - 2.0 4.5 - 18 750 0.5 1.1 215 1/4" Hex 8431 0170 19EBL21-1500-RE 0.5 - 2.1 4.5 - 19 1500 0.8 1.8 235 1/4" Hex 8431 0170 47EBL25-RE 1.0 - 2.5 8.8 - 22.1 930 0.8 1.8 235 1/4" Hex 8431 0170 26EBL35-RE 1.0 - 3.5 8.8 - 31 700 0.8 1.8 235 1/4" Hex 8431 0170 36
SOFT STOPREPORTING
EBL03-SS-RE 0.05 - 0.3 0.4 - 2.7 870 0.3 0.7 185 Wing type 4mm 8431 0170 08EBL12-SS-RE 0.2 - 1.2 1.8 - 10.6 910 0.5 1.1 215 1/4" Hex 8431 0170 17EBL20-SS-RE 0.5 - 2.0 4.5 - 18 750 0.5 1.1 215 1/4" Hex 8431 0170 21EBL25-SS-RE 1.0 - 2.5 8.8 - 22.1 930 0.8 1.8 235 1/4" Hex 8431 0170 29EBL35-SS-RE 1.0 - 3.5 8.8 - 31 700 0.8 1.8 235 1/4" Hex 8431 0170 39
SOFT START
EBL12 ST 0.2 - 1.2 1.8 - 10.6 910 0.5 1.1 215 1/4" Hex 8431 0170 14EBL25 ST 1.0 - 2.5 8.8 - 22.1 930 0.8 1.8 235 1/4" Hex 8431 0170 24EBL35 ST 1.0 - 3.5 8.8 - 31 700 0.8 1.8 235 1/4" Hex 8431 0170 37
a EBL 45 and EBL 25-1500 to be used with EBL Drive Plus.
- All tool models, drives and cables are ESD and UL certified.
- Tool box include cable for drive connection (standard models with 5 pins cable and reporting models with 6 pins cable).
2 8 AT L A S C O P C O S C R E W D R I V E R S
Shaker tray
Consists of a rubber box. A variety of interchangeable rubber grid plates should be ordered separately. (see table below)
Accessories – EBL
Vaccum pick-up adapterNozzle blank
Grid plate
ISO standard connectors
To build your own 22 V AC network. With our components and an ordinary two core cable, min 1.5 mm2, you can quickly arrange the electric supply for a series of screw-drivers.
Screw pick-up system
Picking and positioning of screws are many times crucial for productivity in small screw assembly. The optional equipment offers a vacuum pick-up system to simplify pre-tightening preparations. The system consists of a vacuum pump, adapters for the screwdriver a shaker tray and grids for different screw dimensions.
Nozzle blanks
They must be machined to fit the specific screw to be picked up.
Vacuum pick-up adapters
Screwdrivers can be equipped with vacuum pick-up adapt-ers ready to connect to a vacuum pump. The adapters are delivered without nozzles.
Pistol grip handle(ESD approved)
Service kits
Angle head
EBL screwdriver models EBL 25 and 35 can be equipped with a 90° angle head for access in cramped quarters.
Model OrderingNo.
Vacuum pump – 220V 4220 0062 00
Vacuum pump – 115V 4220 0062 05
Vacuum pick-up adapter for EBL 03 4220 0080 30
Vacuum pick-up adapter for EBL 12/20 4220 0080 31
Vacuum pick-up adapter for EBL 21/25/35 4220 0080 33
Nozzle blank Ø 7.5 mm for EBL 03 4220 0067 03
Nozzle blank Ø 8 mm for EBL 12/20/21/25/35 4220 0070 03
Nozzle blank Ø 14 mm for EBL 12/20/21/25/35 4220 0072 03
Cable optionsModel OrderingNo.
Cable(notESDapproved)
Spiral cable, 1.3 m (5 pin) 4220 0347 00
Spiral cable, 1.3 m (6 pin) 4220 0349 00
Heavy duty, cable 2.0 m (5 pin) 4216 0132 00
Heavy duty, cable 2.0 m (6 pin) 4216 0133 00
Cable(ESDapproved)
Extension cableb 3.0 m (5 pin) 4220 0138 01
Extension cableb 3.0 m (6 pin) 4216 0115 00
b Maximum total length 8 m.
Model OrderingNo.
Male plug 4220 0095 00
2-way female socket. For wall mounting (not ESD approved) 4220 0096 00
Model OrderingNo.
EBL 21, 25, 35 4220 0051 05
EBL 12, 20 4220 0051 04
Model OrderingNo.
EBL 4216 6 0049 90Model OrderingNo.
Shaker tray 4220 0054 00
Forscrewsize,mm OrderingNo.
1.2/1.4 4220 0055 00
1.7 4220 0056 00
2.0 4220 0057 00
2.3 4220 0058 00
2.6 4220 0059 00
3.0 4220 0060 00
4.0 4220 0061 00
Model OrderingNo.
EBL screwdriver 4220 0081 02
Square drive 1/4” (06) 4210 4033 80
Hex bit drive 1/4” (42) 4210 4033 81
Hex quick change 1/4” (Q) 4210 4033 82
Adaptera (ESD approved) 4210 4609 80
Pistol grip handle
Angle head adapter
a Need to be ordered separately.
TEcHNIcAL DATA / AccESSORIES
Vacuum pump
AT L A S C O P C O S C R E W D R I V E R S 29
Accessories – BCP Battery Clutch Screwdrivers
Suspension yokeBattery cover
18 V, 2.6 Ah.
Battery cover
18 V, 1.3 Ah.
Battery
18 V, 2.6 Ah.Battery
18 V, 1.3 Ah.
Battery charger
18 V.
Support handle Colour ringsTool cover
Speed setting unit
BCP – Battery Clutch Screwdrivers
BatteryCurrent
VElectriccharge
Ah
WeightChargetime
min OrderingNo.kg Ib
Li-Ion flat pack 18 1.3 0.37 0.81 35 4211 5426 82
Li-Ion big pack 18 2.6 0.63 1.39 70 4211 5426 83
ChargerInputV/Hz
OutputV/A
Weight
OrderingNo.kg Ib
EU-contact 230V / 50Hz 18V / 1.8A 0.61 1.34 4211 5428 80
UK-contact 230V / 50Hz 18V / 1.8A 0.61 1.34 4211 5428 81
US-contact 120V / 60Hz 18V / 1.8A 0.61 1.34 4211 5428 84
Miscellaneous OrderingNo.
Speed setting unit 4211 5462 80
Support handle 4211 5421 80
Tool cover protection 4211 5415 00
Battery cover protection flat pack 4211 5601 00
Battery cover protection big pack 4211 5602 00
Suspension bail 4211 5600 00
colour ring – red 4211 5461 02
colour ring – orange 4211 5461 03
colour ring – green 4211 5461 04
colour ring – blue 4211 5461 05
colour ring – white 4211 5461 06
colour ring – purple 4211 5461 07
colour ring – grey 4211 5461 08
ModelSquaredrive
in
Torquerange TorqueftIbSpeedr/min
Weight(excl.battery)Length/Height
mm OrderingNo.Nm ftlb Min Max kg Ib
BCP–shut-offbrushlesstoolswithvariablespeed
BcP BL2-I06 1/4 0.8 2.5 0.6 1.8 500 - 1550 0.86 1.89 200/188 8431 1273 00
BcP BL6-I06 1/4 2.0 6.0 1.5 4.4 300 - 1000 0.86 1.89 200/188 8431 1273 10
BcP BL8-I06 1/4 3.0 8.0 2.2 5.9 300 - 800 0.86 1.89 200/188 8431 1273 20
BcP BL12-I06 1/4 5.0 12.0 3.7 8.8 300 - 600 0.86 1.89 200/188 8431 1273 30
BcP BL-12L-I06 1/4 3.0 12.0 2.2 8.8 150 - 440 0.86 1.89 200/188 8431 1273 40
BcP BL-2L-I06 1/4 0.8 2.5 0.6 1.8 150 - 440 0.86 1.89 200/188 8431 1273 50
BcP BL-6L-I06 1/4 1.5 6.0 1.5 4.4 150 - 440 0.86 1.89 200/188 8431 1273 60The tools are set at maximum speed at delivery.
3 0 AT L A S C O P C O S C R E W D R I V E R S
TEcHNIcAL DATA / AccESSORIES
Tensor DL Screwdrivers
Straight tool Angle head tool Pistol grip tool
Model
TorquerangeSpeedr/min
WeightLength
mmCSdistance
mm OrderingNo.Nm inIb kg Ib
Straighttoolswithleverstart
ETD DL21-04-I06 1 - 4 8.8 - 35.4 1 600 0.6 1.3 235 18 / 19.5 8433 4014 25
ETD DL21-07-I06 2.2 - 7.5 19.5 - 66 970 0.6 1.3 235 18 / 19.5 8433 4017 31
ETD DL21-10-I06 3 - 10 26.6 - 88.5 720 0.6 1.3 235 18 / 19.5 8433 4019 10
Push-to-startandfrontlights
ETD DL21-01-I06-PS 0.3 - 1.2 2.6 - 10 2 200 0.6 1.3 243 18 / 19.5 8433 4010 89
ETD DL21-04-I06-PS 1 - 4 8.8 - 35.4 1 600 0.6 1.3 242 18 / 19.5 8433 4014 91
ETD DL21-07-I06-PS 2.2 - 7.5 19.5 - 66 970 0.6 1.3 242 18 / 19.5 8433 4017 69
ETD DL21-10-I06-PS 3 - 10 26.6 - 88.5 720 0.6 1.3 242 18 / 19.5 8433 4019 25
Angleheadtoolswithlever
ETV DL21-04-I06 1 - 4 8.8 - 35.4 1 600 0.7 1.5 268 9 8433 4004 47
ETV DL21-04-I06-Qc 1 - 4 8.8 - 35.4 1 600 0.7 1.5 268 9 8433 4004 73
ETV DL21-04-06 1 - 4 8.8 - 35.4 1 600 0.7 1.5 268 9 8433 4004 91
ETV DL21-07-I06 2.2 - 7.5 19.5 - 66 970 0.7 1.5 268 9 8433 4007 66
ETV DL21-07-I06-Qc 2.2 - 7.5 19.5 - 66 970 0.7 1.5 268 9 8433 4007 79
ETV DL21-07-06 2.2 - 7.5 19.5 - 66 970 0.7 1.5 268 9 8433 4007 94
ETV DL21-20-10 5 - 20 44.2 - 180 465 0,85 1,9 285 14 8433 4008 55
ETV DL21-20-B10 5 - 20 44.2 - 180 465 0,85 1,9 285 14 8433 4008 60
ETV DL21-10-I06 3 - 12 26.6 - 106.2 610 0.7 1.5 281 11 8433 4009 34
ETV DL21-10-I06-Qc 3 - 12 26.6 - 106.2 610 0.7 1.5 281 11 8433 4009 61
ETV DL21-10-06 3 - 12 26.6 - 106.2 610 0.7 1.5 281 11 8433 4009 77
Pistolgriptoolswithleverstart
ETP DL21-04-I06 1 - 4 8.8 - 35.4 1 600 0.6 1.3 235 20 8433 4024 19
ETP DL21-07-I06 2.2 - 7.5 19.5 - 66 970 0.6 1.3 235 20 8433 4027 26
ETP DL21-10-I06 3 - 10 26.6 - 88.5 720 0.6 1.3 235 20 8433 4029 13
Pistolgrip(push-to-startandfrontlights)
ETP DL21-01-I06-PS-H 0.3 - 1.2 2.6 - 10 2 200 0.6 1.3 243 20 8433 4020 77
ETP DL21-04-I06 1 - 4 8.8 - 35.4 1 600 0.6 1.3 242 20 8433 4024 66
ETP DL21-07-I06 2.2 - 7.5 19.5 - 66 970 0.6 1.3 242 20 8433 4027 53
ETP DL21-10-I06 3 - 10 26.6 - 88.5 720 0.6 1.3 242 20 8433 4029 28
ETV = CS distance over angle head.
Tensor DL Drive – the brain of the system
The DL Drive powers the screwdriver, controls the tightening process, monitors the assembly process and guides the operator to ensure the task is performed “right first time”. The DL Drive communicates easily with external sensors and PLCs for line control functionality, and is designed to interface with accessories such as bit selectors and audible and visible alarms.
DL Drive
Model OrderingNo.
DLDrive
D303-DL Basic 8433 4850 48
D313-DL Advanced 8433 4850 33
AT L A S C O P C O S C R E W D R I V E R S 31
Carbon fibre torque arm
Pistol grip handdle
Quality Integrated Fastening accessories
Software
Bit selectors, 4 positions
RE-alarm I/O expansion box
DL Cable
ToolsTalk DS/DL software
Accessories – Tensor DL
DL spiral cable DL cable with 90° connector
Tensor DL pistol grip
Accessory cables
Model OrderingNo.
Tensor
Toolcable
3 m 4220 2604 03
5 m 4220 2604 05
10 m 4220 2604 10
15 m 4220 2604 15
Heavydutycable
3 m 4220 3265 03
5 m 4220 3265 05
10 m 4220 3265 10
15 m 4220 3265 15
Cableswith90°connector
3 m 4220 3705 03
5 m 4220 3705 05
10 m 4220 3705 10
15 m 4220 3705 15
Spiralcablestraight
5 m 4220 3240 05
Spiralcablewith90°connector
5 m 4220 3706 05
Extensioncable
3 m 4220 2795 03
5 m 4220 2795 05
10 m 4220 2795 10
ToolsTalkDS/DL OrderingNo.
Swedish 8092 1138 60
English 8092 1138 62
German 8092 1138 64
French 8092 1138 66
Spanish 8092 1138 68
Italian 8092 1138 70
a Only compatible with Bit selector.
Model OrderingNo.
Bit selector 8433 0612 08
Bit selector pad doublea 4222 0933 92
RE-Alarm 8433 0560 03
I/O expansion box 8433 0564 38
Model OrderingNo.
Pistol grip Tensor DL 4220 2743 90
Model Maxtorque Poleheightmm OrderingNo.
SM c10 - 2 Wall mount 10 753 8202 9001 00
SM c10 - 2 Wall mount 10 753 8202 9001 10
Model OrderingNo.
I/O bus cable 0.5 m 4222 0917 00
I/O bus cable 1 m 4222 0917 01
I/O bus cable 3 m 4222 0917 03
I/O bus cable 5 m 4222 0917 05
I/O bus cable 10 m 4222 0917 10
I/O bus cable 15 m 4222 0917 15
I/O Termination plug 4222 0443 00
3 2 AT L A S C O P C O S C R E W D R I V E R S
TEcHNIcAL DATA / AccESSORIES
Tensor SL Screwdrivers
Straight tool Angle head tool Pistol grip tool
Power Focus 4002 drive
RBU – hardware key
Bronze
Stand alone functionality:
• 64 parameter sets
• Autoset
• Batch count
Silver
All the functionality of the bronze plus:
• 250 parameter sets
• Integrated Ethernet
• Job functionality
• Multistage functionality
• Cell functionality
• SPC
• Fieldbus options
Model
TorquerangeSpeedr/min
WeightLength
mmCSdistancea
mm OrderingNo.Nm inIb kg Ib
Straighttoolpush-to-startandfrontlights
ETD SL21-01-I06-PS 0.3 - 1.2 2.7 - 10 3000 0.7 1.6 246 18/19.5 8433 2102 92
ETD SL21-04-I06-PS 0.8 - 4 7 - 35 1600 0.7 1.6 246 18/19.5 8433 2104 91
ETD SL21-07-I06-PS 1.5 - 7.5 13 - 66 970 0.7 1.6 246 18/19.5 8433 2107 69
ETD SL21-10-I06-PS 2.0 - 10 18 - 89 720 0.7 1.6 246 18/19.5 8433 2108 25
Angleheadleverstart
ETV SL21-04-I06 0.8 - 4 7 - 35 1600 0.75 1.7 264 9 8433 2004 47
ETV SL21-04-I06-Qc 0.8 - 4 8 - 35 1600 0.75 1.7 264 9 8433 2004 73
ETV SL21-04-06 0.8 - 4 9 - 35 1600 0.75 1.7 264 9 8433 2004 91
ETV SL21-07-I06 1.5 - 7.5 13 - 66 970 0.75 1.7 264 9 8433 2007 66
ETV SL21-07-I06-Qc 1.5 - 7.5 14 - 66 970 0.75 1.7 264 9 8433 2007 79
ETV SL21-07-06 1.5 - 7.5 15 - 66 970 0.75 1.7 264 9 8433 2007 94
ETV SL21-12-I06 2.5 - 12 22 - 106 610 0.8 1.8 267 11 8433 2008 34
ETV SL21-12-I06-Qc 2.5 - 12 23 - 106 610 0.8 1.8 267 11 8433 2008 61
ETV SL21-12-06 2.5 - 12 24 - 106 610 0.8 1.8 267 11 8433 2008 77
Pistolgrippush-to-start
ETP SL21-01-I06-PS 0.3 - 1.2 2.7 - 10 3000 0.85 1.9 246 20.5 8433 2201 16
ETP SL21-04-PS 0.8 - 4 7 - 35 1600 0.85 1.9 246 20.5 8433 2204 66
ETP SL21-07-PS 1.5 -7.5 13 - 66 970 0.85 1.9 246 20.5 8433 2207 53
ETP SL21-10-PS 2 - 10 18 - 89 720 0.85 1.9 246 20.5 8433 2208 28a) ETD = CS distance without / with handle.
All models have quick change chuck and 1/4” female hex drive for bits.
ETV = CS distance over angle head.
Model OrderingNo.
PF 4002 G-HW 8433 3100 00
PF 4002 c-HW 8433 3100 05
PF 4002 G-DN-HW 8433 3140 00
PF 4002 c-DN-HW 8433 3140 05
PF 4002 G-PB-HW 8433 3142 00
PF 4002 c-PB-HW 8433 3142 20
PF 4002 G-IB-HW 8433 3145 00
PF 4002 c-IB-HW 8433 3145 05
PF 4002 G-MB-HW 8433 3147 00
PF 4002 c-MB-HW 8433 3147 05
PF 4002 G-EIP-HW 8433 3149 00
PF 4002 c-EIP-HW 8433 3149 05
PF 4002 G-PN-HW 8433 3148 00
PF 4002 c-PN-HW 8433 3148 05
Model OrderingNo.
RBU-Bronze 8433 0010 10
RBU-Silver 8433 0015 20
RBU-Gold 8433 0020 20
Gold
All the functionality of the silver plus:
• Advanced line control (Cell Job)
• Synchronisation in a cell
AT L A S C O P C O S C R E W D R I V E R S 33
Cables
MaxiDisplay
Accessories – Tensor SL
SL Cable SL Cable with 90° connector
SL Spiral cable Stacklight
Model OrderingNo.
ToolCable
3 m 4220 3319 03
5 m 4220 3319 05
10 m 4220 3319 10
15 m 4220 3319 15
20 m 4220 3319 20
Heavydutycables
3 m 4220 3378 03
5 m 4220 3378 05
10 m 4220 3378 10
15 m 4220 3378 15
20 m 4220 3378 20
Cablewith90°connector
3 m 4220 3607 03
5 m 4220 3607 05
10 m 4220 3607 10
15 m 4220 3607 15
20 m 4220 3607 20
Spiralcablestraight
5 m 4220 3746 05
Spiralcablewith90°connector
5 m 4220 3617 05
Extensioncable
3 m 4220 2795 03
5 m 4220 2795 05
10 m 4220 2795 10
ToolsTalkPFW10 OrderingNo.
1-user license 8092 1190 01
5-user license 8092 1190 05
10-user license 8092 1190 10
Plant license 8092 1190 99
ToolsNet4000Reports OrderingNo.
05 Spindle License 8092 1410 05
10 Spindle License 8092 1410 10
25 Spindle License 8092 1410 25
Plant License 8092 1410 00
ToolsNet4000Alert OrderingNo.
05 Spindle License 8092 1411 05
10 Spindle License 8092 1411 10
25 Spindle License 8092 1411 25
Plant License 8092 1411 00
ToolsNet4000History OrderingNo.
05 Spindle License 8092 1412 05
10 Spindle License 8092 1412 10
25 Spindle License 8092 1412 25
Plant License 8092 1412 00
Quality Integrated fastening accessories
Model OrderingNo.
MaxiDisplay 19” including Operator Guidance Software 1 user License* 8435 3070 10
Operator Guidance Software 1 user License* 8092 1185 01
Stacklight ESL-04 standard 8433 0570 13
Accessory cables
Software
Model OrderingNo.
I/O bus cable 0.5 m 4222 0917 00
I/O bus cable 1 m 4222 0917 01
I/O bus cable 3 m 4222 0917 03
I/O bus cable 5 m 4222 0917 05
I/O bus cable 10 m 4222 0917 10
I/O bus cable 15 m 4222 0917 15
I/O Termination plug 4222 0443 00
3 4 AT L A S C O P C O S C R E W D R I V E R S
TEcHNIcAL DATA / AccESSORIES
MicroTorque
ETD M 80L ETD M 27 ABL ETD M 50 ABL ETF MT 100MicroTorqueTM controller
Model
TorquerangeSpeedr/min
Lengthmm
Overallwidthmm
WeightBit
drive OrderingNo.NcmInlb kglb
Fixturedtransducerized
ETF MT 5 0.5 - 5 0.04 - 0.4 600 184 20 0.4 0.90 HM 4 mm 8432 0800 10
ETF MT 10 1 - 10 0.09 - 0.9 600 184 20 0.4 0.90 HM 4 mm 8432 0800 11
ETF MT 20 2 - 20 0.18 - 1.8 800 184 20 0.4 0.90 HM 4 mm 8432 0800 12
ETF MT 50 5 - 50 0.44 - 4.4 1000 255 30 0.76 1.67 HM 4 mm 8432 0800 13
ETF MT 80 8 - 80 0.71 - 7.1 1200 274 30 1.18 2.60 HM 4 mm 8432 0800 14
ETF MT 100 10 - 100 0.88 - 8.8 1000 274 30 1.18 2.60 1/4” HEX 8432 0800 15
ETF MT 200 20 - 200 1.77 - 17.7 800 274 30 1.18 2.60 1/4” HEX 8432 0800 16
ETF MT 500 50 - 500 4.42 - 44.2 500 260 40 1.84 4.05 1/4” HEX 8432 0800 17
Hand-heldDigitork,withoutpush-to-start
ETD M 03 A 0.5 - 2.5 0.04 - 0.2 1000 132 16 0.1 0.22 Ø 2 mm 8432 0810 05
ETD M 05 A 1.5 - 5 0.13 - 0.4 750 132 16 0.1 0.22 Ø 2 mm 8432 0810 06
ETD M 10 A 3 - 10 0.27 - 0.9 750 132 16 0.1 0.22 Ø 2 mm 8432 0810 08
ETD M 20 AVB 5 - 20 0.44 - 1.8 750 146 22 0.25 0.55 HM 4 mm 8432 0810 34
ETD M 20 AcBS 5 - 20 0.44 - 1.8 750 162 22 0.25 0.55 HM 4 mm 8432 0810 31
ETD M 25 AVB 7.5 - 25 0.66 - 2.2 750 174 22 0.25 0.55 HM 4 mm 8432 0810 09
Hand-heldErgoDigitork,push-to-startconfigurable
ETD M 27 ABL 7.5 - 27 0.66 - 2.4 800 185.4 29 0.25 0.5 HM 4 mm 8432 0815 02
ETD M 40 ABL 10 - 40 0.71 - 3.6 850 225.4 36 0.52 1.1 HM 4 mm 8432 0815 05
ETD M 50 ABL 15 - 50 1.33 - 4.4 850 225.4 36 0.52 1.1 HM 4 mm 8432 0815 08
ETD M 80 ABL 16 - 80 1.42 - 7.1 850 225.4 36 0.52 1.1 HM 4 mm 8432 0815 11
Hand-heldDigitork,push-startconfigurable
ETD M 40 L 10 - 40 0.71 - 3.6 850 240 27 0.65 1.43 HM 4 mm 8432 0810 25
ETD M 50 L 15 - 50 1.33 - 4.4 850 220 27 0.65 1.43 HM 4 mm 8432 0810 10
ETD M 80 L 16 - 80 1.42 - 7.1 850 240 27 0.65 1.43 HM 4 mm 8432 0810 11
ETD M 100 L 25 - 100 2.21 - 8.8 700 240 27 0.65 1.43 1/4” HEX 8432 0810 12
ETD M 200 L 50 - 200 4.42 - 17.7 700 240 27 0.65 1.43 1/4” HEX 8432 0810 13
ETD M 250 L 75 - 250 6.62 - 23.5 600 240 27 0.65 1.43 1/4” HEX 8432 0810 24
FixturedDigitork
ETF M 05 1.5 - 5 0.13 - 0.4 800 184 20 0.4 0.90 HM 4 mm 8432 0810 15
ETF M 10 3 - 10 0.27 - 0.9 500 184 20 0.4 0.90 HM 4 mm 8432 0810 16
ETF M 20 5 - 20 0.44 - 1.8 650 184 20 0.4 0.90 HM 4 mm 8432 0810 17
ETF M 50 15 - 50 1.33 - 4.4 850 230 30 0.8 1.76 HM 4 mm 8432 0810 18
ETF M 80 16 - 80 1.42 - 7.1 850 272 30 1.2 2.64 HM 4 mm 8432 0810 19
ETF M 100 25 - 100 2.21 - 8.8 700 272 30 1.2 2.64 1/4” HEX 8432 0810 20
ETF M 200 50 - 200 4.42 - 17.7 600 272 30 1.2 2.64 1/4” HEX 8432 0810 21
ETF M 400 150 - 400 13.27 - 35.4 320 260 40 1.8 3.96 1/4” HEX 8432 0810 22
ETF M 800 300 - 800 26.55 - 70.8 300 322 45 2.6 5.73 1/4” HEX 8432 0810 23
Tool cableModel OrderingNo.
M - (AB)L tool - 2 m 8432 0830 37
MT/M/M-AXXX Tool - 2 m 8432 0830 36
M - (AB)L tool - 3.5 m 8432 0831 02
MT/M/M-AXXX Tool - 3.5 m 8432 0831 01
SoftwareModel OrderingNo.
Tools Talk MT Analysis (for graph analysis) 8432 0830 31
Tools Talk MT Analysis/Net (for graph analysis and data collection) 8432 0830 45
ETD M AXXX line: C - tool cable, V - integrated vacuum hose, B - reverse button, S - short lever, L - long lever.
NOTE: ”Complete system” (single ordering number) includes: Controller, screwdriver, tool cable, Tools Talk MT, USB communication cable and power supply.
AT L A S C O P C O S C R E W D R I V E R S 35
Accessories – MicroTorque
Vacuum pumpVacuum adapter
Blank nozzles
Controller accessories
Model OrderingNo.
combi (Remote control + program selector) 8432 0830 88
Remote control 8432 0830 08
Digital program selector 8432 0830 34
Vacuum pump, VPX 3 8432 0830 05
Vacuum pump, VPX 6 8432 0830 06
controller fixture table 8432 0830 84
controller fixture wall 8432 0830 32
Footswitch 8432 0830 07
Desktop socket (with screwdriver presence sensor) 8432 0831 89
MT Stacklight table stand 8432 0830 97
MT Stacklight wall mount 8432 0830 99
Y cable for I/O connector* 8432 0831 99
* cable suitable when two I/O accessories are required.
Shaker tray
Model Slotmm OrderingNo.
SGQLargea(110x110x35mm)
SGQ 15 1.5 8432 0830 09
SGQ 20 2 8432 0830 10
SGQ 25 2.5 8432 0830 11
SGQ 30 3 8432 0830 12
SGQ 35 3.5 8432 0830 13
SGQ 40 4 8432 0830 14
SGQ 45 4.5 8432 0830 15
SGQ 50 5 8432 0830 16
SGQ 55 5.5 8432 0830 17
SGQ 60 6 8432 0830 18
MSGSmallb(70x70x15mm)
MSG 05 0.5 8432 0830 19
MSG 06 0.6 8432 0830 20
MSG 07 0.7 8432 0830 21
MSG 08 0.8 8432 0830 22
MSG 09 0.9 8432 0830 23
MSG 10 1.0 8432 0830 24
MSG 11 1.1 8432 0830 25
MSG 12 1.2 8432 0830 26
MSG 13 1.3 8432 0830 27
MSG 14 1.4 8432 0830 28
MSG 15 1.5 8432 0830 29
a SGQ type (big version): For screws up to 30 mm lenght.
From Ø 1.5 up to Ø 6 mm.b MSG type (small version): For screws up to 10 mm lenght.
From Ø 1.5 up to Ø 6 mm.
Vacuum adapters and nozzles
Model OrderingNo.
ETD 03-25 xVx ( 36-44 mm bit /nozzle Ø 6 mm) 8432 0770 02
ETD 20-25 AcBx (44 mm bit /nozzle Ø 6 mm) 8432 0770 08
ETD 20-25 AcBx (64 mm bit /nozzle Ø 6 mm) 8432 0770 10
ETD 40-80 L (44 mm bit / nozzle Ø 6 mm) 8432 0770 13
ETD 40-80 L (64 mm bit /nozzle Ø 6 mm) 8432 0770 15
ETD 40-80 L (44 mm bit /nozzle Ø 8 mm) 8432 0770 17
ETD 40-80 L (64 mm bit /nozzle Ø 8 mm) 8432 0770 05
ETD 100-250 L (50 mm bit /nozzle Ø 6 mm) 8432 0770 20
ETD 100-250 L (70 mm bit /nozzle Ø 6 mm) 8432 0770 23
ETD 100-250 L (50 mm bit /nozzle Ø 8 mm) 8432 0770 27
ETD 100-250 L (70 mm bit /nozzle Ø 8 mm) 8432 0770 30
ETD 100-250 L (90 mm bit /nozzle Ø 8 mm) 8432 0770 25
ETF 5-80 (44 mm bit /nozzle Ø 6 mm) 8432 0770 33
ETF 5-80 (64 mm bit /nozzle Ø 6 mm) 8432 0770 35
ETF 5-80 (44 mm bit /nozzle Ø 8 mm) 8432 0770 38
ETF 5-80 (64 mm bit /nozzle Ø 8 mm) 8432 0770 40
ETF 100-200 (70 mm bit /nozzle Ø 8 mm) 8432 0770 43
ETF 400-800 (70 mm bit /nozzle Ø 10 mm) 8432 0770 45
Blank nozzle Ø 6 mm 8432 0760 02
Blank nozzle Ø 8 mm 8432 0760 00
Blank nozzle Ø 10 mm 8432 0760 06
Torque arm
Model OrderingNo.
GHP Mini 8432 0830 02
GHP Small 8432 0830 03
GHP Large 8432 0830 04
Model OrderingNo.
Handle between GHP Mini and ETF 05, 10, 20 8432 0830 90
Handle between GHP Small and ETF 50, 100, 200 8432 0830 53
Handle between GHP Large and ETF 400, 500, 800 8432 0830 54
Torque arm handles
GHP MiniGHP Small
Digital Program Selector Shaker trayRemote control
MT Stacklight table version
MT Stacklight for wall mounting
NOTE: The adapters and the handles are not included with the torque arm package, need to be ordered separately.
Torque arm adapters
Model OrderingNo.
Adapter between GHP Mini and ETF 5-20 8432 0830 70
Adapter between GHP Mini and ETD M 3-10 8432 0831 81
Adapter between GHP Mini and ETD M 20-25 AVB 8432 0830 83
Adapter between GHP Small and ETF 50-200 8432 0830 72
Adapter between GHP Small and ETD M-L 8432 0830 73
Adapter between GHP Large and ETF 400-800 8432 0830 74
Universal adapter for GHP Small (LUM, EBL, DL, SL) 8432 0831 80
3 6 AT L A S C O P C O S C R E W D R I V E R S
MicroTorque Transducer
ACTA MT 4 Stationary transducer.
Joint kit
Model
CapacityOveralllength
mm Drive OrderingNo.Ncm InIb
Manualscrewdrivertorquetransducer
MT TH 1 1.0 0.09 115 Ø 3 mm 8432 0820 10
MT TH 2 2.0 0.18 115 Ø 3 mm 8432 0820 11
MT TH 5 5.0 0.44 115 Ø 3 mm 8432 0820 12
MT TH 10 10.0 0.88 115 Ø 3 mm 8432 0820 13
MT TH 20 20.0 1.77 115 1/4" 8432 0820 14
MT TH 50 50.0 4.42 124 1/4" 8432 0820 15
MT TH 100 100.0 8.85 124 1/4" 8432 0820 16
MT TH 200 200.0 17.70 124 1/4" 8432 0820 17
Staticreactiontorquetransducer
MT TS 1 1.0 0.09 81 Ø 3 mm 8432 0820 18
MT TS 2 2.0 0.18 81 Ø 3 mm 8432 0820 19
MT TS 5 5.0 0.44 81 Ø 3 mm 8432 0820 20
MT TS 10 10.0 0.88 81 Ø 3 mm 8432 0820 21
MT TS 20 20.0 1.77 81 Ø 3 mm 8432 0820 22
MT TS 50 50.0 4.42 98 1/4" 8432 0820 23
MT TS 100 100.0 8.85 98 1/4" 8432 0820 24
MT TS 200 200.0 17.70 98 1/4" 8432 0820 25
MT TS 500 500.0 44.25 111 1/4" 8432 0820 52
In-linerotarytorquetransducer
MT TR 2 2.0 0.18 76 Ø 3 mm 8432 0820 29
MT TR 5 5.0 0.44 76 Ø 3 mm 8432 0820 30
MT TR 10 10.0 0.88 76 Ø 5 mm 8432 0820 31
MT TR 20 20.0 1.77 76 Ø 5 mm 8432 0820 32
MT TR 50 50.0 4.42 105 1/4” 8432 0820 33
MT TR 100 100.0 8.85 105 1/4” 8432 0820 34
MT TR 200 200.0 17.70 105 1/4" 8432 0820 35
MT TR 500 500.0 44.25 105 1/4" 8432 0820 36
In-linerotarytorqueandangletransducer
MT TRA 2 2.0 0.18 76 Ø 3 mm 8432 0820 41
MT TRA 5 5.0 0.44 76 Ø 3 mm 8432 0820 42
MT TRA 10 10.0 0.88 76 Ø 5 mm 8432 0820 43
MT TRA 20 20.0 1.77 76 Ø 5 mm 8432 0820 44
MT TRA 50 50.0 4.42 105 1/4” 8432 0820 45
MT TRA 100 100.0 8.85 105 1/4” 8432 0820 46
MT TRA 200 200.0 17.70 105 1/4" 8432 0820 47
MT TRA 500 500.0 44.25 105 1/4" 8432 0820 48
JointKit OrderingNo.
M1.6 for MT TS - 3H7 adapter (up to 20 Ncm) 8432 0830 79
M2 for MT TS - 1/4" adapter (up to 50 Ncm) 8432 0830 78
M2.5 for MT TS - 1/4" adapter (up to 100 Ncm) 8432 0830 77
M3.0 for MT TS - 1/4" adapter (up to 200 Ncm) 8432 0830 87
M4.0 for MT TS - 1/4" adapter (up to 300 Ncm) 8432 0830 86
M5.0 for MT TS - 1/4" adapter (up to 600 Ncm) 8432 0830 85
M6.0 for MT TS - 1/4" adapter (up to 800 Ncm) 8432 0832 67
Accessories, stationary torque transducers
Lensheadscrew BitDrive OrderingNo.
DIN7985 PH0 M1.6x4 V2A PH0 4023 0005 01
ISO14583 TX6 M2.0x10 V2A TX6 4023 0005 02
ISO14583 TX8 M2.5x10 V2A TX8 4023 0005 03
ISO14583 TX10 M3.0x10 V2A TX10 4023 0005 04
ISO14583 TX20 M4.0x12 V2A TX20 4023 0005 05
ISO14583 TX25 M5.0x12 V2A TX25 4023 0005 06
ISO14583 TX30 M6.0x12 V2A TX30 4023 0005 07
Fasteners for joint kits
Model OrderingNo.
AcTA MT 4 (programable over keypad) 8432 0820 04
ToolsTalk MT Analysis (trace analysis) 8432 0830 31
Transducer cable 8432 0830 35
RS232 cable AcTA MT 8432 0831 39
Torque analyzerFastener
TEcHNIcAL DATA / AccESSORIES
AT L A S C O P C O S C R E W D R I V E R S 37
Atlas Copco Screwdriver Bits – Hexagon Drive
Drive system: 1/4’’ Hexagon, Style C 6.3Screw profile:
Slotted bits
Application: For slotted screwsDrive: 1/4’’ Hexagon, Style C 6.3
Phillips bits
Application: For Phillips screwsDrive: 1/4’’ Hexagon, Style C 6.3
Hex bits
Application: For Hex-socket screwsDrive: 1/4’’ Hexagon, Style C 6.3
Drive system: 5/16’’ Hexagon, Style C 8 Screw profile:
Bladethickness(mm)
Bladewidthmm
Lengthmm OrderingNo.
0.7 3.4 25 4023 1400 21
0.8 3.9 25 4023 1400 22
1 5.5 25 4023 1400 26
Slotted bits
Application: For slotted screwsDrive: 3 mm Hexagon
Drive system: 3 mm Hexagon Screw profile:
Bladethickness(mm)
Bladewidthmm
Lengthmm OrderingNo.
0.3 1.8 50 4023 0004 03
0.4 2 50 4023 0004 04
0.4 2.5 50 4023 0004 05
0.5 3 50 4023 0004 06
0.5 4 50 4023 0004 07
0.5 3.5 50 4023 0004 08
0.5 4.5 50 4023 0004 09
0.8 4 50 4023 0004 10
0.8 5.5 50 4023 0004 11
PointLength
mm OrderingNo.
PH0 25 4023 1326 00
PH1 25 4023 0696 01
PH2 25 4023 0697 01
PH3 25 4023 0698 01
PointLength
mm OrderingNo.
2 25 4023 1318 00
2.5 25 4023 1319 00
3 25 4023 0819 00
4 25 4023 1320 00
5 25 4023 0820 00
6 25 4023 0821 00
7 25 4023 1430 00
8 25 4023 0905 00
Hex bits
Application: For Hex-socket screwsDrive: 5/16’’ Hexagon, Style C 8
PointLength
mm OrderingNo.
5 25 4023 1215 00
6 25 4023 1216 00
7 25 4023 1219 00
8 25 4023 1217 00
10 25 4023 1218 00
Pozidriv bits
Application: For Pozidriv screwsDrive: 1/4’’ Hexagon, Style C 6.3
PointLength
mm OrderingNo.
PZ1 25 4023 1101 11
PZ2 25 4023 1101 12
PZ3 25 4023 1101 13
TorxPlus bits
Application: For TorxPlus screwsDrive: 1/4’’ Hexagon, Style C 6.3
PointLength
mm OrderingNo.
IP6 25 4023 0001 70
IP8 25 4023 0001 74
IP10 25 4023 0001 78
Torx bits
Application: For Torx screwsDrive: 1/4’’ Hexagon, Style C 6.3
PointLength
mm OrderingNo.
TX6 25 4023 0001 60
TX8 25 4023 1329 00
TX9 25 4023 1330 00
TX10 25 4023 1321 00
TX15 25 4023 1331 00
TX20 25 4023 1322 00
TX25 25 4023 1332 00
TX27 25 4023 1333 00
TX30 25 4023 1323 00
TX40 25 4023 1334 00
3 8 AT L A S C O P C O S C R E W D R I V E R S
ScREWDRIVER BITS
Slotted bits with finder
Application: For slotted screwsDrive: 1/4’’ Hexagon, Style E 6.3
D
d
t
Outsidedia(D)mm
Bladethickness(t)mm
Bladewidth(d)mm
Lengthmm OrderingNo.
9.5 0.9 4.9 95 4023 0683 00
11.1 1 6.1 93 4023 1313 00
12.7 1.1 7.4 93 4023 0684 00
14.3 1.2 8.9 96 4023 0949 00
15.9 1.3 10 95 4023 0685 00
Phillips bits
Application: For Phillips screws Drive: 3 mm Hexagon
PointLength
mm OrderingNo.
00 50 4023 0004 00
0 50 4023 0004 01
1 50 4023 0004 02
Torx bits
Application: For Torx screwsDrive: 3 mm Hexagon
PointLength
mm OrderingNo.
T6 50 4023 0004 14
T7 50 4023 0004 15
T8 50 4023 0004 16
T10 50 4023 0004 17
Pozidriv bits
Application: For Pozidriv screwsDrive: 3 mm Hexagon
PointLength
mm OrderingNo.
PZ0 50 4023 0004 12
PZ1 50 4023 0004 13
Phillips bits
Application: For Phillips screwsDrive: 1/4’’ Hexagon, Style E 6.3
PointLength
mm OrderingNo.
PH00 50 4023 0001 51
PH00 70 4023 0001 52
PH00 90 4023 0001 53
PH0 50 4023 1325 00
PH1 50 4023 2320 21
PH1 70 4023 2327 21
PH1 89 4023 2335 21
PH1 152 5023 2360 21
PH2 50 4023 2320 22
PH2 70 4023 2327 22
PH2 89 4023 2335 22
PH2 152 4023 2360 22
PH3 50 4023 2320 23
PH3 70 4023 2327 23
PH3 89 4023 2335 23
PH3 152 4023 2360 23
Torx bits
Application: For Torx screwsDrive: 1/4’’ Hexagon, Style E 6.3
PointLength
mm OrderingNo.
TX5 50 4023 0002 16
TX5 70 4023 0002 17
TX6 50 4023 0001 61
TX6 70 4023 0001 62
TX6 90 4023 0001 63
TX7 50 4023 0002 18
TX7 70 4023 0002 19
TX8 50 4023 2220 21
TX8 89 4023 2235 21
TX9 50 4023 2220 22
TX9 89 4023 2235 22
TX10 50 4023 2220 23
TX10 89 4023 2235 23
TX15 50 4023 2220 24
TX15 89 4023 2235 24
TX20 50 4023 2220 25
TX20 89 4023 2235 25
TX25 50 4023 2220 26
TX25 89 4023 2235 26
TX27 50 4023 2220 27
TX27 89 4023 2235 27
TX30 50 4023 2220 28
TX30 89 4023 2235 28
TX40 89 4023 2235 29
Slotted bits
Application: For slotted screwsDrive: 1/4’’ Hexagon, Style E 6.3
Drive system: 1/4’’ Hexagon, Style E 6.3 Screw profile:
Bladethickness(mm)
Bladewidth(mm)
Lengthmm OrderingNo.
3.2 0.7 49 4023 2020 21
3.9 0.8 49 4023 2020 23
4.7 0.9 49 4023 2020 24
6.3 1 49 4023 2020 26
7 1.1 49 4023 2020 27
7.9 1.2 49 4023 2020 28
9.1 1.3 49 4023 2020 29
3.2 0.7 76 4023 2030 21
3.9 0.8 76 4023 2030 23
4.7 0.9 76 4023 2030 24
AT L A S C O P C O S C R E W D R I V E R S 39
Adapters
Hex bits
Application: For Hex-socket screwsDrive: 7/16’’ Hexagon, Style E 11.2
TorxPlus bits
Application: For TorxPlus screwsDrive: 1/4’’ Hexagon, Style E 6.3
PointLength
mm OrderingNo.
IP5 50 4023 0002 20
IP5 70 4023 0002 21
IP6 50 4023 0001 71
IP6 70 4023 0001 72
IP6 90 4023 0001 73
IP7 50 4023 0002 23
IP7 70 4023 0002 24
IP7 90 4023 0002 25
IP8 50 4023 0001 75
IP8 70 4023 0001 76
IP8 90 4023 0001 77
IP10 50 4023 0001 79
IP10 70 4023 0001 80
IP10 90 4023 0001 81
Pozidriv bits
Application: For Pozidriv screwsDrive: 1/4’’ Hexagon, Style E 6.3
PointLength
mm OrderingNo.
PZ0 50 4023 0001 41
PZ0 70 4023 0001 42
PZ1 50 4023 2420 21
PZ1 70 4023 2427 21
PZ1 89 4023 2435 21
PZ2 50 4023 2420 22
PZ2 70 4023 2427 22
PZ2 70 4023 2435 22
PZ3 50 4023 2420 23
PZ3 89 4023 2435 23
OrderingNo.
Adapter 4220 0105 00
PointLength
mm OrderingNo.
5 70 4023 0800 00
6 70 4023 0801 00
8 70 4023 0802 00
10 70 4023 0760 00
Bit holders
Standard type
L1 L Hf
DD1
Hs
Hexdrive
Hexfemale
Diameter(D)mm
Diameter(D1)mm
LengthLmm
LengthL1mm Magnetic OrderingNo.
1/4" 1/4" 9.5 7.9 47.8 53.8 Yes 4023 1208 00
1/4" 1/4" 9.5 7.9 47.8 104.8 Yes 4023 1209 00
Quick release type
L 1 L HfHs
D
Hexdrive
Hexfemale
Diameter(D)mm
LengthLmm
LengthL1mm Magnetic OrderingNo.
1/4" 1/4" 9.4 35.7 25.4 Yes 4023 1353 00
1/4" 1/4" 9.4 50 25.4 Yes 4023 0707 00
Drive system: 7/16’’ Hexagon, Style E 11.2 Screwprofile
Drive system: 1/4’’ Hexagon, Style E 6.3 Application: Suitable for bits with 1/4”Hexagon Drive
Drive system: 1/4’’ Hexagon, Style E 6.3 Application: For bits with Wing-Shank4 mm drive
Hex bits
Application: For Hex-socket screwsDrive: 1/4’’ Hexagon, Style E 6.3
PointLength
mm OrderingNo.
2 49 4023 1311 00
2.5 49 4023 1312 00
3 49 4023 0710 00
4 49 4023 0711 00
5 49 4023 0712 00
6 49 4023 0906 00
6.35 49 4023 0942 00
8 49 4023 1369 00
10 49 4023 1370 00
4 0 AT L A S C O P C O S C R E W D R I V E R S
ScREWDRIVER BITS
PointLength
mm OrderingNo.
TX1 40 4023 0002 52
TX2 60 4023 0002 53
TX3 60 4023 0002 54
TX4 60 4023 0001 90
TX5 60 4023 0001 91
TX6 60 4023 0001 92
TX8 60 4023 0001 93
TX10 60 4023 0001 94
PointLength
mm OrderingNo.
IP4 60 4023 0002 10
IP5 60 4023 0002 11
IP6 60 4023 0002 12
IP8 60 4023 0002 13
IP10 60 4023 0002 14
PointLength
mm OrderingNo.
PH00 40 4023 0002 56
PH0 40 4023 0002 57
PH0 60 4023 0002 03
PH1 40 4023 0002 58
PH2 40 4023 0002 59
PointLength
mm OrderingNo.
1.5 60 4023 0002 60
2 60 4023 0002 61
2.5 60 4023 0002 62
3 60 4023 0002 63
PointBladewidth
mmLength
mm OrderingNo.
0.28 1.3 60 4023 1327 01
0.30 1.7 60 4023 1327 02
0.3 2.0 60 4023 1327 03
0.3 2.5 60 4023 1327 04
PointLength
mm OrderingNo.
PZ0 60 4023 0002 03
PZ1 60 4023 0002 04
PZ2 60 4023 0002 55
Atlas Copco Screwdriver Bits – Wing-shank Drive
Drive system: 4 mm Wing-shankScrew profile:
Torx bits
Application: For Torx screwsDrive: Wing-shank 4 mm
TorxPlus bits
Application: For TorxPlus screwsDrive: Wing-shank 4 mm
Pozidriv bits
Application: For Pozidriv screwsDrive: Wing-shank 4 mm
Slotted bits
Application: For Slotted screwsDrive: Wing-shank 4 mm
Phillips bits
Application: For Phillips screwsDrive: Wing-shank 4 mm
Hex bits
Application: For Hex screwsDrive: Wing-shank 4 mm
AT L A S C O P C O S C R E W D R I V E R S 41
ScREWDRIVER BITS
Atlas Copco Screwdriver Bits – Halfmoon Drive
Drive system: 4 mm HalfmoonScrew profile:
Pozidriv bits
Application: For Pozidriv screwsDrive: Halfmoon 4 mm
Drive system: 4 mm HalfmoonApplication: Suitable for bits with 1/4’’ Hexagon drive
Adapters
Phillips bits
Application: For Phillips screwsDrive: Halfmoon 4 mm
PointLength
mm OrderingNo.
PZ0 44 4023 0002 26
PZ0 64 4023 0002 27
PZ1 44 4023 0002 28
PZ1 64 4023 0002 29
Hex bits
Application: For Hex-socket screwsDrive: Halfmoon 4 mm
PointLength
mm OrderingNo.
1.5 44 4023 0002 41
2 44 4023 0002 42
2.5 44 4023 0002 43
3 44 4023 0002 44
Model OrderingNo.
Non magnetic 4023 0002 15
Slotted bits
Application: For slotted screwsDrive: Halfmoon 4 mm
Bladewidth(mm)
Bladethicknessmm
Lengthmm OrderingNo.
2 0.3 44 4023 0002 37
2.5 0.3 44 4023 0002 38
3 0.4 44 4023 0002 39
4 0.5 44 4023 0002 40
PointLength
mm OrderingNo.
PH000 44 4023 0001 10
PH000 64 4023 0001 11
PH00 44 4023 0001 12
PH00 64 4023 0001 13
PH0 44 4023 0001 14
PH0 64 4023 0001 15
PH1 44 4023 0001 16
PH1 64 4023 0001 17
PH1 90 4023 0001 18
PH2 44 4023 0002 30
PH2 64 4023 0002 31
Hex-socket bits
Nutsetter.Application: For nuts and thread-headed screwsDrive: Halfmoon 4 mm
PointLength
mm OrderingNo.
2.3 44 4023 0002 45
2.5 44 4023 0002 46
3 44 4023 0002 47
4 44 4023 0002 48
4.5 44 4023 0002 49
5 44 4023 0002 50
5.5 44 4023 0002 51
TorxPlus bits
Application: For TorxPlus screwsDrive: Halfmoon 4 mm
PointLength
mm OrderingNo.
IP2 44 4023 0002 35
IP3 44 4023 0002 36
IP4 44 4023 0001 30
IP4 64 4023 0001 31
IP5 44 4023 0001 32
IP5 64 4023 0001 33
IP6 44 4023 0001 34
IP6 64 4023 0001 35
IP8 44 4023 0001 36
IP8 64 4023 0001 37
IP10 44 4023 0001 38
IP10 64 4023 0001 39
Torx bits
Application: For Torx screwsDrive: Halfmoon 4 mm
PointLength
mm OrderingNo.
TX1 44 4023 0002 32
TX2 44 4023 0001 06
TX3 44 4023 0001 08
TX3 64 4023 0001 09
TX4 44 4023 0001 20
TX4 64 4023 0001 21
TX5 44 4023 0001 22
TX5 64 4023 0001 23
TX6 44 4023 0001 24
TX6 64 4023 0001 25
TX8 44 4023 0001 26
TX8 64 4023 0001 27
TX10 44 4023 0001 28
TX10 64 4023 0001 29
4 2 AT L A S C O P C O S C R E W D R I V E R S
The declared values given in this table were obtained by laboratory type testing in accordance with the stated standards and are suitable for comparison with the declared values of other tools tested in accordance with the same standards. These declared values are not ad-equate for use in risk assessments and values measured in individual workplaces may be higher. The actual expo-sure values and risk of harm experienced by an individual user are unique and depend upon the way the user works, the workpiece and the workstation design, as well as upon the exposure time and the physical condition of the user.
We, Atlas Copco Tools AB, cannot be held liable for the consequences of using the declared values, instead of values reflecting the actual exposure, in an individual risk assessment in a workplace situation over which we have no control.
Power Tools may cause hand-arm vibration syndrome if their use is not adequately managed. An EU guide to managing hand-arm vibration can be found athttp://www.humanvibration.com/EU/VIBGUIDE.htm We recommend a program of health surveillance to detect early symptoms which may relate to noise or vibration exposure, so that management procedures can be modified to help prevent future impairment.All values are current as of the date of this publication.
For the latest information please visitwww.atlascopco.com/tools/ergonomics
VIBRATION AND NOISE EMISSION VALUES
Vibrationtotalvalue
Vibrationvalue
Soundpressurelevels
(3-axesvalue) (1-axisvalue) andsoundaccordingto accordingto powerlevelsa
ISO28927-2 ISO8662-1 accordingto
Validfrom2010
Validuntil2009
ISO15744
Value3-axes
Uncer-tainty
Value1-axisSound
pressureSoundpower
Model m/s2 m/s2 m/s2 dB(A) dB(A)
PneumaticscrewdriversPistolgrip
Shut-offLUM10 <2.5 <2.5 72LUM12 HRX <2.5 <2.5 74LUM12 HRF <2.5 <2.5 <70LUM22 <2.5 <2.5 78
StraightShut-offLUM02 <2.5 <2.5 71LUM10 <2.5 <2.5 <70LUM12 <2.5 <2.5 75LUM22PR <2.5 <2.5 75LUM22SR <2.5 <2.5 78
AngleShut-offLTV009 <2.5 <2.5 75
BatteryscrewdriversBcP <2.5 <2.5 <70
ElectricscrewdriversEBL <2.5 <2.5 <70ETF M/MT — — <70ETD M <2.5 <2.5 <70ETD DL <2.5 <2.5 <70ETV DL <2.5 <2.5 <70ETP DL <2.5 <2.5 <70ETD SL <2.5 <2.5 <70ETV SL <2.5 <2.5 <70ETP SL <2.5 <2.5 <70
a The uncertainty in the sound levels is 3 dB(A).
b Vibrations are not given for tools intended for fixtured applications.
AT L A S C O P C O S C R E W D R I V E R S 43
9833
177
8 21
Rec
ycla
ble
pape
r. Je
tlag
2010
:1
www.atlascopco.com
Top Related