Thank you for purchasing your Furniture from Bedz King.
Every effort has been made to ensure your Furniture isof the finest quality. If you have any questions, please donot hesitate to contact us at [email protected]
Bunk Bed Twin over Full Mission
Bedz King BK - 301
page 1 of 11 (JAN/2015)
page 2 of 11 (JAN/2015)
READ THESE INSTRUCTIONS CAREFULLY BEFOREATTEMPTING TO ASSEMBLE THIS BED
SAFETY WARNINGS AND GENERAL NOTES
Follow the information on the warning labels on the upper bunk bedstructure and on the carton. Do not remove warning label from the bed.
Always use the recommended size mattress or mattress support, or both,to help prevent the likelihood of entrapment or falls.
The top surfaces of the mattress must be at least 5" below the upper edge ofthe guardrails.
Do not allow children under 6 years of age to use the upper bunk.
Prohibit more than one person on the upper bunk.
Periodically check and ensure that the guardrails, ladder and other componentsare in their proper position, free from damage, and that all connectors are tight.
Do not allow horseplay on or under the bed. Always prohibit jumping onthe bed.
Always use the ladder for entering and leaving the upper bunk.
Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
Use of a night-light may provide added safety for a child using the upper bunk.
If the bunk bed will be placed next to the wall, the guardrail that runs the fulllength of the bed should be placed against the wall to prevent entrapmentbetween the bed and the wall.
Always use guardrails on both long sides of the upper bunk.
The use of a water or sleep floatation mattress is prohibited.
Keep these instructions for future reference.
We recommend assembling your bunk bed on the shipping carton to protectyour floor or carpet. Be certain all staples are out of the box before beginningassembly on the shipping carton.
Strangulation Hazard Never attach or hang items to any part of thebunk bed that are not designed for use with the bed for example, but not limitedto hooks, belts, and jump ropes.
page 3 of 11 (JAN/2015)
C515x90
04
A103,5x30
84
B51/4"
24
G8 01
B71/4"x110
24
A53,5x16
18
D13 02
space blockG4 02B16 14
B87,0x50
13
D22 02
7,0x110
C6 5810x50
37
08
27
12
09
40
41
12
27
13
08
26
46
09
05
22
22
16 1844
44
44
44
44
04
1815
12
1619
45
26
21
21
15
05
03
WARNING
DO NOT REMOVE THISLABEL
To help prevent serious or fatal injuries
from entrapment or falls:Use only mattress which is 74!-75! long and
37-3w8!ide on upper bunk.
1/2!1/2Ensure thickness of mattress and foundation
combined does not exceed 9! and mattress is
at least 5! below upper edge of guardrails.
Never allow a child under 6 years on upper bunk.
Use guardrails on both sides of upper bunk.
Prohibit horseplay on or under bed(s).
Prohibit more than one person on upper bunk.
Use ladder for entering and leaving upper bunk.
STRANGULATION HAZARD - Never attach or hang
items to any part of the bunk bed that are not designed
for use with the bed,for example, but not limited to
hooks, belts, and jump ropes.
48
48
47
47
WARNING
DO NOT REMOVE THIS LABEL
To help prevent serious or fatal injuries from entrapment or falls:- Never allow a child under 6 years on upper bunk.- Use only ma�ress which is 74" - 75" long and37 1/2" - 38 1/2" wide on upper bunk.- Ensure thickness of ma�ress and founda�oncombined does not exceed 9" and ma�ress is at least 5" below upper edge of guardrails.
- Use guardrails on both sides of upper bunk- Prohibit horseplay on or under bed (s).- Prohibit more than one person on upper bunk.- Use ladder for entering and leaving upper bunk.- STRANGULATION HAZARD - Never attach or hangitems to any part the bunk bed that are not designedfor use with the bed for example, but not limited to hooks, belts and jump ropes.
Testing performed at one or more of the following independent testing locations:
Diversified Testing Laboratories Inc336 West Front StreetP.O. Box 4004Burlington, NC 27215
Armstrong Forensic Laboratory330 Loch'n Green TrailArlington, TX 76012
Date Testing Location RegulationJanuary - April 2014 Armstrong 15 U.S.C. § 1278aSeptember 2014 Armstrong 16 CFR 1303March 2014 Diversified ASTM F 1427-13March 2014 Diversified 16 CFR 1213 and 16 CFR 1513
Custodian of Test Records:Manager of Compliance and TestingBedz King LLC816 111th StreetArlington, TX 76011
Manufactured by:Bedz King LLC816 111th StreetArlington, TX 76011
Pursuant to the Consumer Product Safety Improvement Act (CPSIA) Sec. 102 the manufacturer certifies compliance with the Consumer Product Safety Commission (CPSC) regulations listed below.
**** Product Information ****
BK 301 (Mission)BUNK BED -
Date of Manufacture:
**** Safety Testing Information ****
Made in Brazil
Children's Product Certificates avaliable at www.bedzking.com/certificates
01
C6C6
C6
C6
16 -2x
44 -5x
C6
C6
12 -3x
C6
C6
13
C6C6
C6C6
5-2x1
B16+G8
B7+G8
B5
B5
G8+B16
G8+B7
G8
B16
27
09
08
27
09
08
B5
B5G8+B16
G8+B7
B7+G8
B16+G8
B5
02
C6C6
C6
C6C6
C6
26
C6C6
C6
C6C6
C6
2x 2x
27
C6 - 54x
B7 - 04x B16 - 04x B5 - 04xG8 - 01x
page 4 of 11 (JAN/2015)
03
page 5 of 11 (JAN/2015)
G8+B7G8+B7
G8+B7
G8+B7
B7+G8
B7+G8
B5B5
B5B5
B5B5
G8
B7
B7
12
12
09
08
27
08
09
27
04 C5
C5
C5
C5
C5
A5A5 D13
A5A5A5
A5
D13
B7 - 08x B5 - 08xG8 - 01x
A5 - 08x D13 - 02x C5 - 04x
B5
B5
4746
A10
G4
46
47
05
page 6 of 11 (JAN/2015)
06
A10A10
A10A10
A10A10
A10A10
A10
A5
A5
A5A537
22
22
A10 - 08x A5 - 04x
G4 - 02xA10 - 28x
A10A10
A10A10
A10 A10A10
A10A10
A10A10
A10
G4
G4
47
47
46
(12x)
07
page 7 of 11 (JAN/2015)
08
B5
G8+B7G8+B7
G8+B16
G8+B16
G8
B7
B7
B16+G8
B7+G8B7+G8
G8+B8
G8+B8
G8+B8
B5B5
B5
13
16
16
12
15
15
19
B7 - 08x B16 - 06x B5 - 08xG8 - 01x B8 - 03x
26
03
05
05
04
G8+B16
B7+G8
G8+B7
B16+G8
G8+B7
G8+B16
B7+G8
B16+G8
B5
B5
B5
B5
B5
G8
B7
G8
B16
26
WARNINGDO NOT REMOVE THIS LABEL
To help prevent serious or fatal injuries
from entrapment or falls:
Use only mattress which is 74!-75!long and
37-38 !wide on upper bunk.
1/2!1/2
Ensure thickness of mattress and foundation
combined does not exceed 9!and mattress is
at least 5!below upper edge of guardrails.
Never allow a child under 6 years on upper bunk. Use guardrails on both sides of upper bunk.
Prohibit horseplay on or under bed(s).
Prohibit more than one person on upper bunk.
Use ladder for entering and leaving upper bunk.
STRANGULATION HAZARD - Never attach or hang
items to any part of the bunk bed that are not designed
for use with the bed,for example, but not limited to
hooks, belts, and jump ropes.
Bedz King LLC.
816 111th Street
Arlington. Texas 76011
USAItem#: PO
Month/year of Mfg.:
B7 - 04x B16 - 04x B5 - 04xG8 - 01x
G8+B7G8+B7
G8+B16
G8+B16
B5
B5
B8
B8
G8
16
16
19
13
B8
09
page 8 of 11 (JAN/2015)
10
C6
A10A10
A10
A10
A10
A10
A10
A10
A10
A10
A10
A10
A10
A10
21
21
18
18
C6
C6
C6
C6
C6 - 04x
A10 - 14x
page 9 of 11 (JAN/2015)
12
A10
A10
A10 - 06x
A10
A10
A10
A10
11
G4 - 02xA10 - 28x
A10
G4
45
48
4845
45
(12x)
G4
G4
A10A10
A10A10
A10A10
A10A10
A10A10
A10A10
A1048
48
4
13
44
40
41
44
44
44
44
A5 - 04x G8 - 01xB8 - 10x D22 - 02x
B8
B8
G8+B8
B8+G8
G8+B8
B8+G8
G8+B8
B8+G8
G8+B8
B8+G8
A5A5
D22
A5
A5D22
D22
A5
A5
A5
A5 - 02x
13
page 10 of 11 (JAN/2015)
page 11 of 11 (JAN/2015)
BEDDING SPECIFICATION
- Always use the recommended size mattress or mattress support or both, to helpprevent the likelihood of entrapment or falls.- All Bedz King bunk beds are supplied with a complete slat kit, so there is no needfor a foundation or bunkie board.
BED MATTRESS SPECIFICATIONS
Upper Bunk: Only use a mattress that is 74" - 75" long and 37 1/2" - 38 1/2" wide on the upper bunk.- Ensure thickness of mattress and foundation combined does not exceed 9".
Lower Bunk: Only use a mattress that is 74" - 75" long and 53 1/2" - 54 1/2" wide on the lower bunk.
REPLACEMENT PARTS
- Replacement parts, including additional guardrails may be obtained by contactingBedz King LLC at [email protected] Guard rails are not available for the lower bunk. This bunk bed is not designed or certified to have guard rails installed on the lower bunk.
ASSEMBLY TIPS
- Power tools are not recommended for assembling your furniture.- Give yourself plenty of room to work.- Due to the size of this bunkbed, it must be assembled within the space it will occupy.- The assembly will require at least two people to complete.- Make sure all the fasteners are tight.- Take your time and read the instructions carefully.
Top Related