T
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
ARC FLASH PPE PRODUCT DATA SHEETS
Table of Contents
3Phase® Lift-Front Arc Shield………………………………………………….. 3
Arc Shield for Hoods…………….…………………………………………….…… 11
AmpShield® Kits……………………………………………………………………… 21
AmpShield® Replacement Parts………………………………..….………… 48
Arc Shield Kits………….……………………………………………………………… 57
Arc Shield Replacement Parts……………………………….………………… 75
Arc Goggles & Balaclavas…………………………………….…………..…….. 84
Arc Accessories………………………………………..………….…...……….…… 91
Glossary & Material Performance Information…………………..…… 98
Product Data Sheet3Phase® Lift-Front Arc Shield Model 3P12-S
Lift-front arc flash protection shield with HT™ lens designed to be worn with shrouds. ATPV 12 calories. Hard hat not included. Available for purchase only through Paulson’s OEM customers. Contact Paulson for OEM contact information.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name 3P12-SMaterial Shield- Polycarbonate; Bracket-Nylon Color Shield- Grey; Bracket- BlueProduct Weight 1.1 lbs.Specification Meets NFPA 70E; Meets/Tested ASTM
F2178; ANSI Z87+SDescription Single lens HT™ lift-front arc flash
protection shield. Designed to be worn with shrouds. Rated 12 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 12 cal/cm2. Lift-front technology allows for enhanced breathability and communication. Toric lens design and nanoparticle grey color provide excellent field of view, enhanced color recognition, and reduced internal glare. Premium anti-fog & anti-abrasion coated. ArcVentTM system helps to ventilate and aids communication. Compatible withPaulson’s ALM™ flashlight system.
Applications 3Phase® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use a 3Phase® for electric arc welding exposures. The grey color of this 3Phase® maximizes visibility.
3
Product Data Sheet3Phase® Lift-Front Arc Shield Model 3P20-S
Lift-front arc flash protection shield with HT™ lens designed to be worn with shrouds. ATPV 20 calories. Hard hat not included. Available for purchase only through Paulson’s OEM customers. Contact Paulson for OEM contact information.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name 3P20-SMaterial Shield- Polycarbonate; Bracket-Nylon Color Shield- Grey; Bracket- BlueProduct Weight 1.1 lbs.Specification Meets NFPA 70E; Meets/Tested ASTM
F2178; ANSI Z87+SDescription Single lens HT™ lift-front arc flash
protection shield. Designed to be worn with shrouds. Rated 20 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 20 cal/cm2. Lift-front technology allows for enhanced breathability and communication. Toric lens design and nanoparticle grey color provide excellent field of view, enhanced color recognition, and reduced internal glare. Premium anti-fog & anti-abrasion coated. ArcVentTM system helps to ventilate and aids communication. Compatible withPaulson’s ALM™ flashlight system.
Applications 3Phase® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use a 3Phase® for electric arc welding exposures. The grey color of this 3Phase® maximizes visibility.
4
Product Data Sheet3Phase® Lift-Front Arc Shield Model 3P40-S
Lift-front arc flash protection shield with HT™ lens designed to be worn with shrouds. ATPV 40 calories. Hard hat not included. Available for purchase only through Paulson’s OEM customers. Contact Paulson for OEM contact information.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name 3P40-SMaterial Shield- Polycarbonate; Bracket-Nylon Color Shield- Grey; Bracket- BlueProduct Weight 1.1 lbs.Specification Meets NFPA 70E; Meets/Tested ASTM
F2178; ANSI Z87+SDescription Single lens HT™ lift-front arc flash
protection shield. Designed to be worn with shrouds. Rated 40 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 40 cal/cm2. Lift-front technology allows for enhanced breathability and communication. Toric lens design and nanoparticle grey color provide excellent field of view, enhanced color recognition, and reduced internal glare. Premium anti-fog & anti-abrasion coated. ArcVentTM system helps to ventilate and aids communication. Compatible withPaulson’s ALM™ flashlight system.
Applications 3Phase® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use a 3Phase® for electric arc welding exposures. The grey color of this 3Phase® maximizes visibility.
5
Product Data Sheet3Phase® Lift-Front Arc Shield Model 3P12-H
Lift-front arc flash protection shield with HT™ lens designed to be worn with hoods. ATPV 12 calories. Hard hat not included. Available for purchase only through Paulson’s OEM customers. Contact Paulson for OEM contact information.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name 3P12-HMaterial Shield- Polycarbonate; Bracket-Nylon Color Shield- Grey; Bracket- BlueProduct Weight 1.1 lbs.Specification Meets NFPA 70E; Meets/Tested ASTM
F2178; ANSI Z87+SDescription Single lens HT™ lift-front arc flash
protection shield. Designed to be worn with hoods. Rated 12 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 12 cal/cm2. Lift-front technology allows for enhanced breathability and communication. Toric lens design and nanoparticle grey color provide excellent field of view, enhanced color recognition, and reduced internal glare. Premium anti-fog & anti-abrasion coated. ArcVentTM system helps to ventilate and aids communication. Compatible withPaulson’s ALM™ flashlight system.
Applications 3Phase® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use a 3Phase® for electric arc welding exposures. The grey color of this 3Phase® maximizes visibility.
6
Product Data Sheet3Phase® Lift-Front Arc Shield Model 3P20-H
Lift-front arc flash protection shield with HT™ lens designed to be worn with hoods. ATPV 20 calories. Hard hat not included. Available for purchase only through Paulson’s OEM customers. Contact Paulson for OEM contact information.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name 3P20-HMaterial Shield- Polycarbonate; Bracket-Nylon Color Shield- Grey; Bracket- BlueProduct Weight 1.1 lbs.Specification Meets NFPA 70E; Meets/Tested ASTM
F2178; ANSI Z87+SDescription Single lens HT™ lift-front arc flash
protection shield. Designed to be worn with hoods. Rated 20 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 20 cal/cm2. Lift-front technology allows for enhanced breathability and communication. Toric lens design and nanoparticle grey color provide excellent field of view, enhanced color recognition, and reduced internal glare. Premium anti-fog & anti-abrasion coated. ArcVentTM system helps to ventilate and aids communication. Compatible withPaulson’s ALM™ flashlight system.
Applications 3Phase® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use a 3Phase® for electric arc welding exposures. The grey color of this 3Phase® maximizes visibility.
7
Product Data Sheet3Phase® Lift-Front Arc Shield Model 3P40-H
Lift-front arc flash protection shield with HT™ lens designed to be worn with hoods. ATPV 40 calories. Hard hat not included. Available for purchase only through Paulson’s OEM customers. Contact Paulson for OEM contact information.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name 3P40-HMaterial Shield- Polycarbonate; Bracket-Nylon Color Shield- Grey; Bracket- BlueProduct Weight 1.1 lbs.Specification Meets NFPA 70E; Meets/Tested ASTM
F2178; ANSI Z87+SDescription Single lens HT™ lift-front arc flash
protection shield. Designed to be worn with hoods. Rated 40 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 40 cal/cm2. Lift-front technology allows for enhanced breathability and communication. Toric lens design and nanoparticle grey color provide excellent field of view, enhanced color recognition, and reduced internal glare. Premium anti-fog & anti-abrasion coated. ArcVentTM system helps to ventilate and aids communication. Compatible withPaulson’s ALM™ flashlight system.
Applications 3Phase® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use a 3Phase® for electric arc welding exposures. The grey color of this 3Phase® maximizes visibility.
8
Product Data Sheet3Phase® Lift-Front Arc Shield Model 3P75-H
Lift-front arc flash protection shield with HT™ lens designed to be worn with hoods. ATPV 75 calories. Hard hat not included. Available for purchase only through Paulson’s OEM customers. Contact Paulson for OEM contact information.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name 3P75-HMaterial Shield- Polycarbonate; Bracket-Nylon Color Shield- Grey; Bracket- BlueProduct Weight 1.1 lbs.Specification Meets NFPA 70E; Meets/Tested ASTM
F2178; ANSI Z87+SDescription Dual lens HT™ lift-front arc flash
protection shield. Designed to be worn with hoods. Rated 75 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 75 cal/cm2. Lift-front technology allows for enhanced breathability and communication. Toric lens design and nanoparticle grey color provide excellent field of view, enhanced color recognition, and reduced internal glare. Premium anti-fog & anti-abrasion coated. ArcVentTM system helps to ventilate and aids communication. Compatible withPaulson’s ALM™ flashlight system.
Applications 3Phase® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use a 3Phase® for electric arc welding exposures. The grey color of this 3Phase® maximizes visibility.
9
Product Data Sheet3Phase® Lift-Front Arc Shield Model 3P100-H
Lift-front arc flash protection shield with HT™ lens designed to be worn with hoods. ATPV 100 calories. Hard hat not included. Available for purchase only through Paulson’s OEM customers. Contact Paulson for OEM contact information.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name 3P100-HMaterial Shield- Polycarbonate; Bracket-Nylon Color Shield- Grey; Bracket- BlueProduct Weight 1.1 lbs.Specification Meets NFPA 70E; Meets/Tested ASTM
F2178; ANSI Z87+SDescription Dual lens HT™ lift-front arc flash
protection shield. Designed to be worn with hoods. Rated 100 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 100 cal/cm2. Lift-front technology allows for enhanced breathability and communication. Toric lens design and nanoparticle grey color provide excellent field of view, enhanced color recognition, and reduced internal glare. Premium anti-fog & anti-abrasion coated. ArcVentTM system helps to ventilate and aids communication. Compatible withPaulson’s ALM™ flashlight system.
Applications 3Phase® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use a 3Phase® for electric arc welding exposures. The grey color of this 3Phase® maximizes visibility.
10
Product Data SheetHT™ Arc Shield for HoodsModel IM22-AFA-25V-HT
HT™ arc flash protection face shield with Velcro® pattern for hoods. ATPV 25 calories. Available for purchase only through Paulson’s OEM customers. Contact Paulson for OEM contact information.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name IM22-AFA-25V-HT
Material Shield- Polycarbonate; Attachment System- Velcro®, Adhesive, Plastic Alloy Components
Color Shield- Grey; Attachment System-Black
Product Weight 0.74 lbs.Specification Meets NFPA 70E; Meets/Tested ASTM
F2178; ANSI Z87+SDescription Single lens HT™ arc window. Injection
molded to shape. Velcro® riveted design securing three layers together (Velcro®, window, and gasket). For use with hoods. Rated 25 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 25cal/cm2. Nanoparticle grey color provides excellent field of view and enhanced color recognition. Premium anti-fog and anti-abrasion coated for a longer service life. Structurally sound while giving the product a self supporting frame.
Applications This arc window is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use this arc window for electric arc welding exposures. The grey color of this arc window maximizes visibility.
11
Product Data SheetHT™ Arc Shield for HoodsModel IM22-AFA-40V-HTS
HT™ arc flash protection face shield with Velcro® pattern for hoods. ATPV 40 calories. Available for purchase only through Paulson’s OEM customers. Contact Paulson for OEM contact information.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name IM22-AFA-40V-HTS
Material Shield- Polycarbonate; Attachment System- Velcro®, Adhesive, Plastic Alloy Components
Color Shield- Grey; Attachment System-Black
Product Weight 0.74 lbs.Specification Meets NFPA 70E; Meets/Tested ASTM
F2178; ANSI Z87+S Description Single lens HT™ arc window. Injection
molded to shape. Velcro® riveted design securing three layers together (Velcro®, window, and gasket). For use with hoods. Rated 40 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 40cal/cm2. Nanoparticle grey color provides excellent field of view and enhanced color recognition. Premium anti-fog and anti-abrasion coated for a longer service life. Structurally sound while giving the product a self supporting frame.
Applications This arc window is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use this arc window for electric arc welding exposures. The grey color of this arc window maximizes visibility.
12
Product Data SheetHT™ Arc Shield for HoodsModel IM22-AFA2-40V-HT
HT™ arc flash protection face shield with Velcro® pattern for hoods. ATPV 40 calories. Available for purchase only through Paulson’s OEM customers. Contact Paulson for OEM contact information.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name IM22-AFA2-40V-HT
Material Shield- Polycarbonate; Attachment System- Velcro®, Adhesive, Plastic Alloy Components
Color Shield- Grey; Attachment System-Black
Product Weight 0.74 lbs.Specification Meets NFPA 70E; Meets/Tested ASTM
F2178; ANSI Z87+SDescription Dual lens HT™ arc window. Injection
molded to shape. Velcro® riveted design securing three layers together (Velcro®, window, and gasket). For use with hoods. Rated 40 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 40cal/cm2. Nanoparticle grey color provides excellent field of view and enhanced color recognition. Premium anti-fog and anti-abrasion coated for a longer service life. Structurally sound while giving the product a self supporting frame.
Applications This arc window is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use this arc window for electric arc welding exposures. The grey color of this arc window maximizes visibility.
13
Product Data SheetHT™ Arc Shield for HoodsModel IM22-AFA2-75V-HT
HT™ arc flash protection face shield with Velcro® pattern for hoods. ATPV 75 calories. Available for purchase only through Paulson’s OEM customers. Contact Paulson for OEM contact information.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name IM22-AFA2-75V-HT
Material Shield- Polycarbonate; Attachment System- Velcro®, Adhesive, Plastic Alloy Components
Color Shield- Grey; Attachment System-Black
Product Weight 0.74 lbs.Specification Meets NFPA 70E; Meets/Tested ASTM
F2178; ANSI Z87+SDescription Dual lens HT™ arc window. Injection
molded to shape. Velcro® riveted design securing three layers together (Velcro®, window, and gasket). For use with hoods. Rated 75 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 75cal/cm2. Nanoparticle grey color provides excellent field of view and enhanced color recognition. Premium anti-fog and anti-abrasion coated for a longer service life. Structurally sound while giving the product a self supporting frame.
Applications This arc window is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use this arc window for electric arc welding exposures. The grey color of this arc window maximizes visibility.
14
Product Data SheetHT™ Arc Shield for HoodsModel IM22-AFA2-100V-HT
HT™ arc flash protection face shield with Velcro® pattern for hoods. ATPV 100 calories. Available for purchase only through Paulson’s OEM customers. Contact Paulson for OEM contact information.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name IM22-AFA2-100V-HT
Material Shield- Polycarbonate; Attachment System- Velcro®, Adhesive, Plastic Alloy Components
Color Shield- Grey; Attachment System-Black
Product Weight 0.74 lbs.Specification Meets NFPA 70E; Meets/Tested ASTM
F2178; ANSI Z87+SDescription Dual lens HT™ arc window. Injection
molded to shape. Velcro® riveted design securing three layers together (Velcro®, window, and gasket). For use with hoods. Rated 100 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 100cal/cm2. Nanoparticle grey color provides excellent field of view and enhanced color recognition. Premium anti-fog and anti-abrasion coated for a longer service life. Structurally sound while giving the product a self supporting frame.
Applications This arc window is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use this arc window for electric arc welding exposures. The grey color of this arc window maximizes visibility.
15
Product Data SheetArc Shield for HoodsModel IM22-AFA-25V
Arc flash protection face shield with Velcro® pattern for hoods. ATPV 25 calories. Available for purchase only through Paulson’s OEM customers. Contact Paulson for OEM contact information.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name IM22-AFA-25V
Material Shield- Polycarbonate; Attachment System- Velcro®, Adhesive, Plastic Alloy Components
Color Shield- Green; Attachment System-Black
Product Weight 0.74 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Single lens arc window. Injection molded to shape. Velcro® riveted design securing three layers together (Velcro®, window, and gasket). For use with hoods. Rated 25 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 25cal/cm2. Excellent field of view.Premium anti-fog and anti-abrasion coated for a longer service life. Structurally sound while giving the product a self supporting frame.
Applications This arc window is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use this arc window for electric arc welding exposures.
16
Product Data SheetArc Shield for HoodsModel IM22-AFA2-40V
Arc flash protection face shield with Velcro® pattern for hoods. ATPV 40 calories. Available for purchase only through Paulson’s OEM customers. Contact Paulson for OEM contact information.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name IM22-AFA-40V
Material Shield- Polycarbonate; Attachment System- Velcro®, Adhesive, Plastic Alloy Components
Color Shield- Green; Attachment System-Black
Product Weight 0.74 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Dual lens arc window. Injection molded to shape. Velcro® riveted design securing three layers together (Velcro®, window, and gasket). For use with hoods. Rated 40 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 40cal/cm2. Excellent field of view.Premium anti-fog and anti-abrasion coated for a longer service life. Structurally sound while giving the product a self supporting frame.
Applications This arc window is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use this arc window for electric arc welding exposures.
17
Product Data SheetArc Shield for HoodsModel IM22-AFA2-50V
Arc flash protection face shield with Velcro® pattern for hoods. ATPV 50 calories. Available for purchase only through Paulson’s OEM customers. Contact Paulson for OEM contact information.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name IM22-AFA-50V
Material Shield- Polycarbonate; Attachment System- Velcro®, Adhesive, Plastic Alloy Components
Color Shield- Green; Attachment System-Black
Product Weight 0.74 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Dual lens arc window. Injection molded to shape. Velcro® riveted design securing three layers together (Velcro®, window, and gasket). For use with hoods. Rated 50 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 50cal/cm2. Excellent field of view.Premium anti-fog and anti-abrasion coated for a longer service life. Structurally sound while giving the product a self supporting frame.
Applications This arc window is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use this arc window for electric arc welding exposures.
18
Product Data SheetArc Shield for HoodsModel IM22-AFA2-75V
Arc flash protection face shield with Velcro® pattern for hoods. ATPV 75 calories. Available for purchase only through Paulson’s OEM customers. Contact Paulson for OEM contact information.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name IM22-AFA-75V
Material Shield- Polycarbonate; Attachment System- Velcro®, Adhesive, Plastic Alloy Components
Color Shield- Green; Attachment System-Black
Product Weight 0.74 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Dual lens arc window. Injection molded to shape. Velcro® riveted design securing three layers together (Velcro®, window, and gasket). For use with hoods. Rated 75 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 75cal/cm2. Excellent field of view.Premium anti-fog and anti-abrasion coated for a longer service life. Structurally sound while giving the product a self supporting frame.
Applications This arc window is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use this arc window for electric arc welding exposures.
19
Product Data SheetArc Shield for HoodsModel IM22-AFA2-100V
Arc flash protection face shield with Velcro® pattern for hoods. ATPV 100 calories. Available for purchase only through Paulson’s OEM customers. Contact Paulson for OEM contact information.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name IM22-AFA-100V
Material Shield- Polycarbonate; Attachment System- Velcro®, Adhesive, Plastic Alloy Components
Color Shield- Green; Attachment System-Black
Product Weight 0.74 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Dual lens arc window. Injection molded to shape. Velcro® riveted design securing three layers together (Velcro®, window, and gasket). For use with hoods. Rated 100 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 100cal/cm2. Excellent field of view.Premium anti-fog and anti-abrasion coated for a longer service life. Structurally sound while giving the product a self supporting frame.
Applications This arc window is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use this arc window for electric arc welding exposures.
20
Product Data SheetHT™ AmpShield® Kit #1Model AMP1-12HTS-EC
Arc flash protection kit with HT™ lens, transparent ergonomic chin protector, & cap bracket for slotted caps. ATPV 12 calories. Hard hat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name AMP1-12HTS-EC
Material Shield- Polycarbonate; Bracket-Nylon
Color Shield- Grey; Bracket- BlueProduct Weight 0.70 lbs.Specification Meets NFPA 70E; Meets/Tested ASTM
F2178; ANSI Z87+SDescription HT™ arc flash protection kit for slotted
cap helmets. Includes HTTM lens with ergonomic transparent chin protector,mounting bracket, and instructions. Rated 12 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 12 cal/cm2. Nanoparticle grey color provides excellent field of view and enhanced color recognition. Excellent downward vision with transparent ergonomic chin protector. LeverLock®
attachment system for easy window replacement.
Applications AmpShield® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an AmpShield® for electric arc welding exposures. The grey color of this AmpShield® maximizes visibility.
21
Product Data SheetHT™ AmpShield® Kit #1Model AMP1-12-HTS
Arc flash protection kit with HT™ lens, small profile transparent chin protector, & cap bracket for slotted caps. ATPV 12 calories. Hard hat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name AMP1-12-HTS
Material Shield- Polycarbonate; Bracket-Nylon
Color Shield- Grey; Bracket- Blue
Product Weight 0.70 lbs.Specification Meets NFPA 70E; Meets/Tested ASTM
F2178; ANSI Z87+SDescription HT™ arc flash protection kit for slotted
cap helmets. Includes HTTM lens with small-profile transparent chin protector, mounting bracket, and instructions. Rated 12 cal/cm2
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 12 cal/cm2. Nanoparticle grey color provides excellent field of view and enhanced color recognition. Excellent downward vision with transparent chin protector. LeverLock® attachment system for easy window replacement.
Applications AmpShield® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an AmpShield® for electric arc welding exposures. The grey color of this AmpShield® maximizes visibility.
22
Product Data SheetHT™ AmpShield® Kit #1Model AMP1-12HT-EC
Arc flash protection kit with HT™ lens, transparent ergonomic chin protector, & cap bracket for slotted caps. ATPV 12 calories. Hard hat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name AMP1-12HT-EC
Material Shield- Polycarbonate; Bracket-NylonColor Shield- Grey; Bracket- BlueProduct Weight 0.70 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description HT™ arc flash protection kit for slotted cap helmets. Includes HTTM lens with transparent ergonomic chin protector,mounting bracket, and instructions. Rated 12 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 12 cal/cm2. Nanoparticle grey color provides excellent field of view and enhanced color recognition. Excellent downward vision with transparent ergonomic chin protector. Premium anti-fog and anti-abrasion coated. LeverLock® attachment system for easy window replacement.
Applications AmpShield® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an AmpShield® for electric arc welding exposures. The grey color of this AmpShield® maximizes visibility.
23
Product Data SheetHT™ AmpShield® Kit #1Model AMP1-12-HT
Arc flash protection kit with HT™ lens, transparent chin protector, & cap bracket for slotted caps. ATPV 12 calories. Hard hat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name AMP1-12-HT
Material Shield- Polycarbonate; Bracket-NylonColor Shield- Grey; Bracket- BlueProduct Weight 0.70 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description HT™ arc flash protection kit for slotted cap helmets. Includes HTTM lens with transparent chin protector, mounting bracket, and instructions. Rated 12 cal/cm2
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 12 cal/cm2. Nanoparticle grey color provides excellent field of view and enhanced color recognition. Excellent downward vision with transparent chin protector. Premium anti-fog and anti-abrasion coated. LeverLock®
attachment system for easy window replacement.
Applications AmpShield® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an AmpShield® for electric arc welding exposures. The grey color of this AmpShield® maximizes visibility.
24
Product Data SheetHT™ AmpShield® Kit #1Model AMP1-20HT-EC
Arc flash protection kit with HT™ lens, transparent ergonomic chin protector, & cap bracket for slotted caps. ATPV 20 calories. Hard hat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name AMP1-20HT-EC
Material Shield- Polycarbonate; Bracket-NylonColor Shield- Grey; Bracket- BlueProduct Weight 0.70 lbs.Specification Meets NFPA 70E; Meets/Tested ASTM
F2178; ANSI Z87+SDescription HT™ arc flash protection kit for slotted
cap helmets. Includes HTTM lens with transparent ergonomic chin protector,mounting bracket, and instructions. Rated 20 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 20 cal/cm2. Nanoparticle grey color provides excellent field of view and enhanced color recognition. Excellent downward vision with transparent ergonomic chin protector. Premium anti-fog and anti-abrasion coated. LeverLock® attachment system for easy window replacement.
Applications AmpShield® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an AmpShield® for electric arc welding exposures. The grey color of this AmpShield® maximizes visibility.
25
Product Data SheetHT™ AmpShield® Kit #1Model AMP1-20-HT
Arc flash protection kit with HT™ lens, transparent chin protector, & cap bracket for slotted caps. ATPV 20 calories. Hard hat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name AMP1-20-HT
Material Shield- Polycarbonate; Bracket-NylonColor Shield- Grey; Bracket- BlueProduct Weight 0.70 lbs.Specification Meets NFPA 70E; Meets/Tested ASTM
F2178; ANSI Z87+SDescription HT™ arc flash protection kit for slotted
cap helmets. Includes HTTM lens with transparent chin protector, mounting bracket, and instructions. Rated 20 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 20 cal/cm2. Nanoparticle grey color provides excellent field of view and enhanced color recognition. Excellent downward vision with transparent chin protector. Premium anti-fog and anti-abrasion coated. LeverLock®
attachment system for easy window replacement.
Applications AmpShield® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an AmpShield® for electric arc welding exposures. The grey color of this AmpShield® maximizes visibility.
26
Product Data SheetHT™ AmpShield® Kit #2Model AMP2-12HTS-EC
Arc flash protection kit with HT™ lens, transparent ergonomic chin protector, & cap bracket for slotted and non-slotted caps. ATPV 12 calories. Hard hat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name AMP2-12HTS-EC
Material Shield- Polycarbonate; Bracket-Nylon
Color Shield- Grey; Bracket- BlueProduct Weight 0.70 lbs.Specification Meets NFPA 70E; Meets/Tested ASTM
F2178; ANSI Z87+SDescription HT™ arc flash protection kit for slotted
and non-slotted cap helmets. Includes HTTM lens with ergonomic transparent chin protector, mounting bracket, and instructions. Rated 12 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 12 cal/cm2. Nanoparticle grey color provides excellent field of view and enhanced color recognition. Excellent downward vision with transparent ergonomic chin protector. LeverLock®
attachment system for easy window replacement.
Applications AmpShield® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an AmpShield® for electric arc welding exposures. The grey color of this AmpShield® maximizes visibility.
27
Product Data SheetHT™ AmpShield® Kit #2Model AMP2-12-HTS
Arc flash protection kit with HT™ lens, small-profile transparent chin protector, & cap bracket for slotted and non-slotted caps. ATPV 12 calories. Hard hat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name AMP2-12-HTS
Material Shield- Polycarbonate; Bracket-Nylon
Color Shield- Grey; Bracket- BlueProduct Weight 0.70 lbs.Specification Meets NFPA 70E; Meets/Tested ASTM
F2178; ANSI Z87+SDescription HT™ arc flash protection kit for slotted
and non-slotted cap helmets. Includes HTTM lens with small-profile transparent chin protector, mounting bracket, and instructions. Rated 12 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 12 cal/cm2. Nanoparticle grey color provides excellent field of view and enhanced color recognition. Excellent downward vision with transparent chin protector. LeverLock® attachment system for easy window replacement.
Applications AmpShield® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an AmpShield® for electric arc welding exposures. The grey color of this AmpShield® maximizes visibility.
28
Product Data SheetHT™ AmpShield® Kit #2 Model AMP2-12HT-EC
Arc flash protection kit with HT™ lens, transparent ergonomic chin protector, & cap bracket for slotted and non-slotted caps. ATPV 12 calories. Hard hat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name AMP2-12HT-EC
Material Shield- Polycarbonate; Bracket-NylonColor Shield- Grey; Bracket- BlueProduct Weight 0.70 lbs.Specification Meets NFPA 70E; Meets/Tested ASTM
F2178; ANSI Z87+SDescription HT™ arc flash protection kit for slotted
and non-slotted cap helmets. Includes HTTM lens with transparent ergonomic chin protector, mounting bracket, and instructions. Rated 12 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 12 cal/cm2. Nanoparticle grey color provides excellent field of view and enhanced color recognition. Excellent downward vision with transparent ergonomic chin protector. Premium anti-fog and anti-abrasion coated. LeverLock® attachment system for easy window replacement.
Applications AmpShield® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an AmpShield® for electric arc welding exposures. The grey color of this AmpShield® maximizes visibility.
29
Product Data SheetHT™ AmpShield® Kit #2 Model AMP2-12-HT
Arc flash protection kit with HT™ lens, transparent chin protector, & cap bracket for slotted and non-slotted caps. ATPV 12 calories. Hard hat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name AMP2-12-HT
Material Shield- Polycarbonate; Bracket-NylonColor Shield- Grey; Bracket- BlueProduct Weight 0.70 lbs.Specification Meets NFPA 70E; Meets/Tested ASTM
F2178; ANSI Z87+SDescription HT™ arc flash protection kit for slotted
and non-slotted cap helmets. Includes HTTM lens with transparent chin protector, mounting bracket, and instructions. Rated 12 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 12 cal/cm2. Nanoparticle grey color provides excellent field of view and enhanced color recognition. Excellent downward vision with transparent chin protector. Premium anti-fog and anti-abrasion coated. LeverLock®
attachment system for easy window replacement.
Applications AmpShield® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an AmpShield® for electric arc welding exposures. The grey color of this AmpShield® maximizes visibility.
30
Product Data SheetHT™ AmpShield® Kit #2Model AMP2-20HT-EC
Arc flash protection kit with HT™ lens, transparent ergonomic chin protector, & cap bracket for slotted and non-slotted caps. ATPV 20 calories. Hard hat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name AMP2-20HT-EC
Material Shield- Polycarbonate; Bracket-NylonColor Shield- Grey; Bracket- BlueProduct Weight 0.70 lbs.Specification Meets NFPA 70E; Meets/Tested ASTM
F2178; ANSI Z87+SDescription HT™ arc flash protection kit for slotted
and non-slotted cap helmets. Includes HTTM lens with transparent ergonomic chin protector, mounting bracket, and instructions. Rated 20 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 20cal/cm2. Nanoparticle grey color provides excellent field of view and enhanced color recognition. Excellent downward vision with transparent ergonomic chin protector. Premium anti-fog and anti-abrasion coated. LeverLock® attachment system for easy window replacement.
Applications AmpShield® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an AmpShield® for electric arc welding exposures. The grey color of this AmpShield® maximizes visibility.
31
Product Data SheetHT™ AmpShield® Kit #2Model AMP2-20-HT
Arc flash protection kit with HT™ lens, transparent chin protector, & cap bracket for slotted and non-slotted caps. ATPV 20 calories. Hard hat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name AMP2-20-HT
Material Shield- Polycarbonate; Bracket-NylonColor Shield- Grey; Bracket- BlueProduct Weight 0.70 lbs.Specification Meets NFPA 70E; Meets/Tested ASTM
F2178; ANSI Z87+SDescription HT™ arc flash protection kit for slotted
and non-slotted cap helmets. Includes HTTM lens with transparent chin protector, mounting bracket, and instructions. Rated 20 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 20cal/cm2. Nanoparticle grey color provides excellent field of view and enhanced color recognition. Excellent downward vision with transparent chin protector. Premium anti-fog and anti-abrasion coated. LeverLock®
attachment system for easy window replacement.
Applications AmpShield® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an AmpShield® for electric arc welding exposures. The grey color of this AmpShield® maximizes visibility.
32
Product Data SheetHT™ AmpShield® Kit #3Model AMP3-12HTS-EC
Arc flash protection kit with HT™ lens, transparent ergonomic chin protector, & hat bracket for full-brim helmets. ATPV 12 calories. Hard hat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name AMP3-12HTS-EC
Material Shield- Polycarbonate; Bracket-Nylon
Color Shield- Grey; Bracket- BlueProduct Weight 0.70 lbs.Specification Meets NFPA 70E; Meets/Tested ASTM
F2178; ANSI Z87+SDescription HT™ arc flash protection kit for full
brim helmets. Includes HTTM lens with transparent ergonomic chin protector,mounting bracket, and instructions. Rated 12 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 12 cal/cm2. Nanoparticle grey color provides excellent field of view and enhanced color recognition. Excellent downward vision with transparent ergonomic chin protector. LeverLock®
attachment system for easy window replacement.
Applications AmpShield® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an AmpShield® for electric arc welding exposures. The grey color of this AmpShield® maximizes visibility.
33
Product Data SheetHT™ AmpShield® Kit #3Model AMP3-12-HTS
Arc flash protection kit with HT™ lens, transparent small-profile chin protector, & hat bracket for full-brim helmets. ATPV 12 calories. Hard hat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name AMP3-12-HTS
Material Shield- Polycarbonate; Bracket-Nylon
Color Shield- Grey; Bracket- Blue
Product Weight 0.70 lbs.Specification Meets NFPA 70E; Meets/Tested ASTM
F2178; ANSI Z87+SDescription HT™ arc flash protection kit for full
brim helmets. Includes HTTM lens with transparent small-profile chin protector, mounting bracket, and instructions. Rated 12 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 12 cal/cm2. Nanoparticle grey color provides excellent field of view and enhanced color recognition. Excellent downward vision with transparent chin protector. LeverLock® attachment system for easy window replacement.
Applications AmpShield® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an AmpShield® for electric arc welding exposures. The grey color of this AmpShield® maximizes visibility.
34
Product Data SheetHT™ AmpShield® Kit #3 Model AMP3-12HT-EC
Arc flash protection kit with HT™ lens, transparent ergonomic chin protector, & hat bracket for full-brim helmets. ATPV 12 calories. Hard hat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name AMP3-12HT-EC
Material Shield- Polycarbonate; Bracket-NylonColor Shield- Grey; Bracket- BlueProduct Weight 0.70 lbs.Specification Meets NFPA 70E; Meets/Tested ASTM
F2178; ANSI Z87+SDescription HT™ arc flash protection kit for full-
brim helmets. Includes HTTM lens with transparent ergonomic chin protector,mounting bracket, and instructions. Rated 12 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 12cal/cm2. Nanoparticle grey color provides excellent field of view and enhanced color recognition. Excellent downward vision with transparent ergonomic chin protector. Premium anti-fog and anti-abrasion coated. LeverLock® attachment system for easy window replacement.
Applications AmpShield® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an AmpShield® for electric arc welding exposures. The grey color of this AmpShield® maximizes visibility.
35
Product Data SheetHT™ AmpShield® Kit #3 Model AMP3-12-HT
Arc flash protection kit with HT™ lens, transparent chin protector, & hat bracket for full-brim helmets. ATPV 12 calories. Hard hat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name AMP3-12-HT
Material Shield- Polycarbonate; Bracket-NylonColor Shield- Grey; Bracket- BlueProduct Weight 0.70 lbs.Specification Meets NFPA 70E; Meets/Tested ASTM
F2178; ANSI Z87+SDescription HT™ arc flash protection kit for full-
brim helmets. Includes HTTM lens with transparent chin protector, mounting bracket, and instructions. Rated 12 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 12cal/cm2. Nanoparticle grey color provides excellent field of view and enhanced color recognition. Excellent downward vision with transparent chin protector. Premium anti-fog and anti-abrasion coated. LeverLock®
attachment system for easy window replacement.
Applications AmpShield® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an AmpShield® for electric arc welding exposures. The grey color of this AmpShield® maximizes visibility.
36
Product Data SheetHT™ AmpShield® Kit #3Model AMP3-20HT-EC
Arc flash protection kit with HT™ lens, transparent ergonomic chin protector, & hat bracket for full-brim helmets. ATPV 20 calories. Hard hat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name AMP3-20HT-EC
Material Shield- Polycarbonate; Bracket-NylonColor Shield- Grey; Bracket- BlueProduct Weight 0.70 lbs.Specification Meets NFPA 70E; Meets/Tested ASTM
F2178; ANSI Z87+SDescription HT™ arc flash protection kit for full-
brim helmets. Includes HTTM lens with transparent ergonomic chin protector,mounting bracket, and instructions. Rated 20 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 20cal/cm2. Nanoparticle grey color provides excellent field of view and enhanced color recognition. Excellent downward vision with transparent chin protector. Premium anti-fog and anti-abrasion coated. LeverLock®
attachment system for easy window replacement.
Applications AmpShield® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an AmpShield® for electric arc welding exposures. The grey color of this AmpShield® maximizes visibility.
37
Product Data SheetHT™ AmpShield® Kit #3Model AMP3-20-HT
Arc flash protection kit with HT™ lens, transparent chin protector, & hat bracket for full-brim helmets. ATPV 20 calories. Hard hat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name AMP3-20-HT
Material Shield- Polycarbonate; Bracket-NylonColor Shield- Grey; Bracket- BlueProduct Weight 0.70 lbs.Specification Meets NFPA 70E; Meets/Tested ASTM
F2178; ANSI Z87+SDescription HT™ arc flash protection kit for full-
brim helmets. Includes HTTM lens with transparent chin protector, mounting bracket, and instructions. Rated 20 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 20cal/cm2. Nanoparticle grey color provides excellent field of view and enhanced color recognition. Excellent downward vision with transparent chin protector. Premium anti-fog and anti-abrasion coated. LeverLock®
attachment system for easy window replacement.
Applications AmpShield® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an AmpShield® for electric arc welding exposures. The grey color of this AmpShield® maximizes visibility.
38
Product Data SheetAmpShield® Kit #1Model AMP1-10
Arc flash protection kit with transparent chin protector & cap bracket for slotted caps. ATPV 10 calories. Hard hat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name AMP1-10
Material Shield- Polycarbonate; Bracket-Nylon
Color Shield- Green; Bracket- Blue
Product Weight 0.70 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Arc flash protection kit for slottedcaps. Includes lens with transparent chin protector, mounting bracket, and instructions. Rated 10 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 10cal/cm2. Excellent field of view & downward vision with transparent chin protector. Premium anti-fog and anti-abrasion coated. LeverLock®
attachment system for easy window replacement.
Applications AmpShield® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an AmpShield® for electric arc welding exposures.
39
Product Data SheetAmpShield® Kit #1Model AMP1-12
Arc flash protection kit with transparent chin protector & cap bracket for slotted caps. ATPV 12 calories. Hard hat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name AMP1-12
Material Shield- Polycarbonate; Bracket-Nylon
Color Shield- Green; Bracket- Blue
Product Weight 0.70 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Arc flash protection kit for slottedcaps. Includes lens with transparent chin protector, mounting bracket, and instructions. Rated 12 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 12cal/cm2. Excellent field of view & downward vision with transparent chin protector. Premium anti-fog and anti-abrasion coated. LeverLock®
attachment system for easy window replacement.
Applications AmpShield® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an AmpShield® for electric arc welding exposures.
40
Product Data SheetAmpShield® Kit #1Model AMP1-20
Arc flash protection kit with transparent chin protector & cap bracket for slotted caps. ATPV 20 calories. Hard hat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name AMP1-20
Material Shield- Polycarbonate; Bracket-Nylon
Color Shield- Green; Bracket- Blue
Product Weight 0.70 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Arc flash protection kit for slottedcaps. Includes lens with transparent chin protector, mounting bracket, and instructions. Rated 20 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 20cal/cm2. Excellent field of view & downward vision with transparent chin protector. Premium anti-fog and anti-abrasion coated. LeverLock®
attachment system for easy window replacement.
Applications AmpShield® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an AmpShield® for electric arc welding exposures.
41
Product Data SheetAmpShield® Kit #2 Model AMP2-10
Arc flash protection kit with transparent chin protector & cap bracket for slotted & non-slotted caps. ATPV 10 calories. Hard hat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name AMP2-10
Material Shield- Polycarbonate; Bracket-Nylon
Color Shield- Green; Bracket- Blue
Product Weight 0.70 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Arc flash protection kit for slottedcaps. Includes lens with transparent chin protector, mounting bracket, and instructions. Rated 10 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 10cal/cm2. Excellent field of view & downward vision with transparent chin protector. Premium anti-fog and anti-abrasion coated. LeverLock®
attachment system for easy window replacement.
Applications AmpShield® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an AmpShield® for electric arc welding exposures.
42
Product Data SheetAmpShield® Kit #2 Model AMP2-12
Arc flash protection kit with transparent chin protector & cap bracket for slotted & non-slotted caps. ATPV 12 calories. Hard hat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name AMP2-12
Material Shield- Polycarbonate; Bracket-Nylon
Color Shield- Green; Bracket- Blue
Product Weight 0.70 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Arc flash protection kit for slottedcaps. Includes lens with transparent chin protector, mounting bracket, and instructions. Rated 12 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 12cal/cm2. Excellent field of view & downward vision with transparent chin protector. Premium anti-fog and anti-abrasion coated. LeverLock®
attachment system for easy window replacement.
Applications AmpShield® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an AmpShield® for electric arc welding exposures.
43
Product Data SheetAmpShield® Kit #2 Model AMP2-20
Arc flash protection kit with transparent chin protector & cap bracket for slotted & non-slotted caps. ATPV 20 calories. Hard hat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name AMP2-20
Material Shield- Polycarbonate; Bracket-Nylon
Color Shield- Green; Bracket- Blue
Product Weight 0.70 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Arc flash protection kit for slottedcaps. Includes lens with transparent chin protector, mounting bracket, and instructions. Rated 20 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 20cal/cm2. Excellent field of view & downward vision with transparent chin protector. Premium anti-fog and anti-abrasion coated. LeverLock®
attachment system for easy window replacement.
Applications AmpShield® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an AmpShield® for electric arc welding exposures.
44
Product Data SheetAmpShield® Kit #3 Model AMP3-10
Arc flash protection kit with transparent chin protector & hat bracket for full-brim helmets. ATPV 10 calories. Hard hat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name AMP3-10
Material Shield- Polycarbonate; Bracket-Nylon
Color Shield- Green; Bracket- Blue
Product Weight 0.70 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Arc flash protection kit for slottedcaps. Includes lens with transparent chin protector, mounting bracket, and instructions. Rated 10 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 10cal/cm2. Excellent field of view & downward vision with transparent chin protector. Premium anti-fog and anti-abrasion coated. LeverLock®
attachment system for easy window replacement.
Applications AmpShield® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an AmpShield® for electric arc welding exposures.
45
Product Data SheetAmpShield® Kit #3 Model AMP3-12
Arc flash protection kit with transparent chin protector & hat bracket for full-brim helmets. ATPV 12 calories. Hard hat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name AMP3-12
Material Shield- Polycarbonate; Bracket-Nylon
Color Shield- Green; Bracket- Blue
Product Weight 0.70 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Arc flash protection kit for slottedcaps. Includes lens with transparent chin protector, mounting bracket, and instructions. Rated 12 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 12cal/cm2. Excellent field of view & downward vision with transparent chin protector. Premium anti-fog and anti-abrasion coated. LeverLock®
attachment system for easy window replacement.
Applications AmpShield® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an AmpShield® for electric arc welding exposures.
46
Product Data SheetAmpShield® Kit #3 Model AMP3-20
Arc flash protection kit with transparent chin protector & hat bracket for full-brim helmets. ATPV 20 calories. Hard hat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name AMP3-20
Material Shield- Polycarbonate; Bracket-Nylon
Color Shield- Green; Bracket- Blue
Product Weight 0.70 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Arc flash protection kit for slottedcaps. Includes lens with transparent chin protector, mounting bracket, and instructions. Rated 20 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 20cal/cm2. Excellent field of view & downward vision with transparent chin protector. Premium anti-fog and anti-abrasion coated. LeverLock®
attachment system for easy window replacement.
Applications AmpShield® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an AmpShield® for electric arc welding exposures.
47
Product Data SheetHT™ AmpShield® Replacement PartModel AMP-12-RW-HTS
HT™ AmpShield® arc flash protection replacement window with small-profile transparent chin protector. ATPV 12 calories.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name AMP-12-RW-HTS
Material Polycarbonate
Color Grey
Product Weight 0.55 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description HT™ AmpShield® arc flash protection replacement window. Includes HTTM
lens with small-profile transparent chin protector and instructions. Rated 12 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 12cal/cm2. Nanoparticle grey color provides excellent field of view and enhanced color recognition. Excellent downward vision with transparent chin protector.
Applications AmpShield® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an AmpShield® for electric arc welding exposures. The grey color of this AmpShield® maximizes visibility.
48
Product Data SheetHT™ AmpShield® Replacement PartModel AMP-12-RW-HT
HT™ AmpShield® arc flash protection replacement window with transparent chin protector. ATPV 12 calories.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name AMP-12-RW-HT
Material Polycarbonate
Color Grey
Product Weight 0.55 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S;
Description HT™ AmpShield® arc flash protection replacement window. Includes HTTM
lens with transparent chin protector and instructions. Rated 12 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 12cal/cm2. Nanoparticle grey color provides excellent field of view and enhanced color recognition. Excellent downward vision with transparent chin protector. Premium anti-fog and anti-abrasion coated.
Applications AmpShield® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an AmpShield® for electric arc welding exposures. The grey color of this AmpShield® maximizes visibility.
49
Product Data SheetHT™ AmpShield® Replacement PartModel AMP-20-RW-HT
HT™ AmpShield® arc flash protection replacement window with transparent chin protector. ATPV 20 calories.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name AMP-20-RW-HT
Material Polycarbonate
Color Grey
Product Weight 0.55 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description HT™ AmpShield® arc flash protection replacement window. Includes HTTM
lens with transparent chin protector and instructions. Rated 12 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 20cal/cm2. Nanoparticle grey color provides excellent field of view and enhanced color recognition. Excellent downward vision with transparent chin protector. Premium anti-fog and anti-abrasion coated.
Applications AmpShield® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an AmpShield® for electric arc welding exposures. The grey color of this AmpShield® maximizes visibility.
50
Product Data SheetHT™ AmpShield® Replacement PartModel AMP-10-RW
AmpShield® arc flash protection replacement window with transparent chin protector. ATPV 10 calories.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name AMP-10-RW
Material Polycarbonate
Color Green
Product Weight 0.55 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description AmpShield® arc flash protection replacement window. Includes lens with transparent chin protector and instructions. Rated 10 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 10cal/cm2. Excellent field of view and downward vision with transparent chin protector. Premium anti-fog and anti-abrasion coated.
Applications AmpShield® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an AmpShield® for electric arc welding exposures.
51
Product Data SheetHT™ AmpShield® Replacement PartModel AMP-12-RW
AmpShield® arc flash protection replacement window with transparent chin protector. ATPV 12 calories.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name AMP-12-RW
Material Polycarbonate
Color Green
Product Weight 0.55 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description AmpShield® arc flash protection replacement window. Includes lens with transparent chin protector and instructions. Rated 12 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 12cal/cm2. Excellent field of view and downward vision with transparent chin protector. Premium anti-fog and anti-abrasion coated.
Applications AmpShield® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an AmpShield® for electric arc welding exposures.
52
Product Data SheetHT™ AmpShield® Replacement PartModel AMP-20-RW
AmpShield® arc flash protection replacement window with transparent chin protector. ATPV 20 calories.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name AMP-20-RW
Material Polycarbonate
Color Green
Product Weight 0.55 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description AmpShield® arc flash protection replacement window. Includes lens with transparent chin protector and instructions. Rated 20 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 20cal/cm2. Excellent field of view and downward vision with transparent chin protector. Premium anti-fog and anti-abrasion coated.
Applications AmpShield® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an AmpShield® for electric arc welding exposures.
53
Product Data SheetAmpShield® Replacement PartModel AMP-CS
AmpShield® Kit #1 replacement cap bracket for slotted caps. For use with all calorie ratings.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name AMP-CS
Material Nylon
Color Blue
Product Weight 0.18 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description AmpShield® Kit #1 replacement cap bracket for slotted caps. For use with all calorie ratings.
Competitive Advantage
This product utilizes the LeverLockTM
shield mounting system for a secure fit.
Applications AmpShield® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an AmpShield® for electric arc welding exposures.
54
Product Data SheetAmpShield® Replacement PartModel AMP-CU
AmpShield® Kit #2 replacement cap bracket for slotted and non-slotted caps. For use with all calorie ratings.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name AMP-CU
Material Nylon
Color Blue
Product Weight 0.22 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description AmpShield® Kit #2 replacement cap bracket for slotted and non-slotted caps. For use with all calorie ratings.
Competitive Advantage
This product utilizes the LeverLockTM
shield mounting system for a secure fit.
Applications AmpShield® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an AmpShield® for electric arc welding exposures.
55
Product Data SheetAmpShield® Replacement PartModel AMP-CH
AmpShield® Kit #3 replacement hat bracket for full-brim helmets. For use with all calorie ratings.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name AMP-CH
Material Nylon
Color Blue
Product Weight 0.23 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description AmpShield® Kit #3 replacement cap bracket for full-brim helmets. For use with all calorie ratings.
Competitive Advantage
This product utilizes the LeverLockTM
shield mounting system for a secure fit.
Applications AmpShield® is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an AmpShield® for electric arc welding exposures.
56
Product Data SheetPremium Arc Shield Kit #1 Model AFA-SK1-PC-8
Arc flash protection kit with premium coated lens and cap bracket for slotted caps. ATPV 8 calories. Hardhat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name AFA-SK1-PC-8
Material Shield- Polycarbonate; Bracket- Nylon
Color Shield- Green; Bracket- Blue
Product Weight 0.63 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Arc flash protection kit with premium coated lens and cap bracket for slotted caps. ATPV 8 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 8 cal/cm2. Excellent field of view & an ergonomic assembly that is convenient for the worker. Premium anti-fog and anti-abrasion coated.
Applications This arc shield is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use this arc shield for electric arc welding exposures.
57
Product Data SheetPremium Arc Shield Kit #1 Model AFA-S2K1-PC-10
Arc flash protection kit with premium coated lens, chin protector, and cap bracket for slotted caps. ATPV 10 calories. Hardhat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name AFA-S2K1-PC-10
Material Shield- Polycarbonate; Bracket- Nylon
Color Shield- Green; Bracket- Blue
Product Weight 0.81 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Arc flash protection kit with premium coated lens, chin protector, and cap bracket for slotted caps. ATPV 10 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 10 cal/cm2. Excellent field of view & an ergonomic assembly that is convenient for the worker. Premium anti-fog and anti-abrasion coated.
Applications This arc shield is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use this arc shield for electric arc welding exposures.
58
Product Data SheetPremium Arc Shield Kit #1 Model AFA-S2K1-PC-12
Arc flash protection kit with premium coated lens, chin protector, and cap bracket for slotted caps. ATPV 12 calories. Hardhat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name AFA-S2K1-PC-12
Material Shield- Polycarbonate; Bracket- Nylon
Color Shield- Green; Bracket- Blue
Product Weight 0.81 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Arc flash protection kit with premium coated lens, chin protector, and cap bracket for slotted caps. ATPV 12 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 12 cal/cm2. Excellent field of view & an ergonomic assembly that is convenient for the worker. Premium anti-fog and anti-abrasion coated.
Applications This arc shield is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use this arc shield for electric arc welding exposures.
59
Product Data SheetPremium Arc Shield Kit #2 Model AFA-SK2-PC-8
Arc flash protection kit with premium coated lens and cap bracket for slotted & non-slotted caps. ATPV 8 calories. Hardhat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name AFA-SK2-PC-8
Material Shield- Polycarbonate; Bracket- Nylon
Color Shield- Green; Bracket- Blue
Product Weight 0.63 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Arc flash protection kit with premium coated lens and cap bracket for slotted & non-slotted caps. ATPV 8 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 8 cal/cm2. Excellent field of view & an ergonomic assembly that is convenient for the worker. Premium anti-fog and anti-abrasion coated.
Applications This arc shield is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use this arc shield for electric arc welding exposures.
60
Product Data SheetPremium Arc Shield Kit #2 Model AFA-S2K2-PC-10
Arc flash protection kit with premium coated lens, chin protector, and cap bracket for slotted & non-slotted caps. ATPV 10 calories. Hardhat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name AFA-S2K2-PC-10
Material Shield- Polycarbonate; Bracket- Nylon
Color Shield- Green; Bracket- Blue
Product Weight 0.81 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Arc flash protection kit with premium coated lens, chin protector, and cap bracket for slotted & non-slotted caps. ATPV 10 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 10 cal/cm2. Excellent field of view & an ergonomic assembly that is convenient for the worker. Premium anti-fog and anti-abrasion coated.
Applications This arc shield is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use this arc shield for electric arc welding exposures.
61
Product Data SheetPremium Arc Shield Kit #2 Model AFA-S2K2-PC-12
Arc flash protection kit with premium coated lens, chin protector, and cap bracket for slotted & non-slotted caps. ATPV 12 calories. Hardhat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name AFA-S2K2-PC-12
Material Shield- Polycarbonate; Bracket- Nylon
Color Shield- Green; Bracket- Blue
Product Weight 0.81 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Arc flash protection kit with premium coated lens, chin protector, and cap bracket for slotted & non-slotted caps. ATPV 12 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 12 cal/cm2. Excellent field of view & an ergonomic assembly that is convenient for the worker. Premium anti-fog and anti-abrasion coated.
Applications This arc shield is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use this arc shield for electric arc welding exposures.
62
Product Data SheetPremium Arc Shield Kit #3 Model AFA-SK3-PC-8
Arc flash protection kit with premium coated lens and hat bracket for full-brim helmets. ATPV 8 calories. Hardhat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name AFA-SK3-PC-8
Material Shield- Polycarbonate; Bracket- Nylon
Color Shield- Green; Bracket- Blue
Product Weight 0.63 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Arc flash protection kit with premium coated lens and hat bracket for full-brim helmets. ATPV 8 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 8 cal/cm2. Excellent field of view & an ergonomic assembly that is convenient for the worker. Premium anti-fog and anti-abrasion coated.
Applications This arc shield is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use this arc shield for electric arc welding exposures.
63
Product Data SheetPremium Arc Shield Kit #3 Model AFA-S2K3-PC-10
Arc flash protection kit with premium coated lens, chin protector, and hat bracket for full-brim helmets. ATPV 10 calories. Hardhat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name AFA-S2K3-PC-10
Material Shield- Polycarbonate; Bracket- Nylon
Color Shield- Green; Bracket- Blue
Product Weight 0.81 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Arc flash protection kit with premium coated lens, chin protector, and hat bracket for full-brim helmets. ATPV 10 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 10 cal/cm2. Excellent field of view & an ergonomic assembly that is convenient for the worker. Premium anti-fog and anti-abrasion coated.
Applications This arc shield is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use this arc shield for electric arc welding exposures.
64
Product Data SheetPremium Arc Shield Kit #3 Model AFA-S2K3-PC-12
Arc flash protection kit with premium coated lens, chin protector, and hat bracket for full-brim helmets. ATPV 12 calories. Hardhat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name AFA-S2K3-PC-12
Material Shield- Polycarbonate; Bracket- Nylon
Color Shield- Green; Bracket- Blue
Product Weight 0.81 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Arc flash protection kit with premium coated lens, chin protector, and hat bracket for full-brim helmets. ATPV 12 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 12 cal/cm2. Excellent field of view & an ergonomic assembly that is convenient for the worker. Premium anti-fog and anti-abrasion coated.
Applications This arc shield is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use this arc shield for electric arc welding exposures.
65
Product Data SheetStandard Arc Shield Kit #1 Model ARC-SK1-PC-8
Arc flash protection kit with standard coated lens and cap bracket for slotted caps. ATPV 8 calories. Hardhat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name ARC-SK1-PC-8
Material Shield- Polycarbonate; Bracket- Nylon
Color Shield- Green; Bracket- Blue
Product Weight 0.63 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Arc flash protection kit with standard coated lens and cap bracket for slotted caps. ATPV 8 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 8 cal/cm2. Excellent field of view & an ergonomic assembly that is convenient for the worker.
Applications This arc shield is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use this arc shield for electric arc welding exposures.
66
Product Data SheetStandard Arc Shield Kit #1 Model ARC-S2K1-PC-10
Arc flash protection kit with standard coated lens, chin protector, and cap bracket for slotted caps. ATPV 10 calories. Hardhat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name ARC-S2K1-PC-10
Material Shield- Polycarbonate; Bracket- Nylon
Color Shield- Green; Bracket- Blue
Product Weight 0.81 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Arc flash protection kit with standard coated lens, chin protector, and cap bracket for slotted caps. ATPV 10 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 10 cal/cm2. Excellent field of view & an ergonomic assembly that is convenient for the worker.
Applications This arc shield is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use this arc shield for electric arc welding exposures.
67
Product Data SheetStandard Arc Shield Kit #1 Model ARC-S2K1-PC-12
Arc flash protection kit with standard coated lens, chin protector, and cap bracket for slotted caps. ATPV 12 calories. Hardhat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name ARC-S2K1-PC-12
Material Shield- Polycarbonate; Bracket- Nylon
Color Shield- Green; Bracket- Blue
Product Weight 0.81 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Arc flash protection kit with standard coated lens, chin protector, and cap bracket for slotted caps. ATPV 12 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 12 cal/cm2. Excellent field of view & an ergonomic assembly that is convenient for the worker.
Applications This arc shield is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use this arc shield for electric arc welding exposures.
68
Product Data SheetStandard Arc Shield Kit #2 Model ARC-SK2-PC-8
Arc flash protection kit with standard coated lens and cap bracket for slotted & non-slotted caps. ATPV 8 calories. Hardhat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name ARC-SK2-PC-8
Material Shield- Polycarbonate; Bracket- Nylon
Color Shield- Green; Bracket- Blue
Product Weight 0.63 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Arc flash protection kit with standard coated lens and cap bracket for slotted & non-slotted caps. ATPV 8 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 8 cal/cm2. Excellent field of view & an ergonomic assembly that is convenient for the worker.
Applications This arc shield is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use this arc shield for electric arc welding exposures.
69
Product Data SheetStandard Arc Shield Kit #2 Model ARC-S2K2-PC-10
Arc flash protection kit with standard coated lens, chin protector, and cap bracket for slotted & non-slotted caps. ATPV 10 calories. Hardhat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name ARC-S2K2-PC-10
Material Shield- Polycarbonate; Bracket- Nylon
Color Shield- Green; Bracket- Blue
Product Weight 0.81 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Arc flash protection kit with standard coated lens, chin protector, and cap bracket for slotted & non-slotted caps. ATPV 10 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 10 cal/cm2. Excellent field of view & an ergonomic assembly that is convenient for the worker.
Applications This arc shield is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use this arc shield for electric arc welding exposures.
70
Product Data SheetStandard Arc Shield Kit #2 Model ARC-S2K2-PC-12
Arc flash protection kit with standard coated lens, chin protector, and cap bracket for slotted & non-slotted caps. ATPV 12 calories. Hardhat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name ARC-S2K2-PC-12
Material Shield- Polycarbonate; Bracket- Nylon
Color Shield- Green; Bracket- Blue
Product Weight 0.81 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Arc flash protection kit with standard coated lens, chin protector, and cap bracket for slotted & non-slotted caps. ATPV 12 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 12 cal/cm2. Excellent field of view & an ergonomic assembly that is convenient for the worker. Premium anti-fog and anti-abrasion coated.
Applications This arc shield is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use this arc shield for electric arc welding exposures.
71
Product Data SheetStandard Arc Shield Kit #3 Model ARC-SK3-PC-8
Arc flash protection kit with standard coated lens and hat bracket for full-brim helmets. ATPV 8 calories. Hardhat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name ARC-SK3-PC-8
Material Shield- Polycarbonate; Bracket- Nylon
Color Shield- Green; Bracket- Blue
Product Weight 0.63 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Arc flash protection kit with standardcoated lens and hat bracket for full-brim helmets. ATPV 8 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 8 cal/cm2. Excellent field of view & an ergonomic assembly that is convenient for the worker.
Applications This arc shield is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use this arc shield for electric arc welding exposures.
72
Product Data SheetStandard Arc Shield Kit #3 Model ARC-S2K3-PC-10
Arc flash protection kit with standard coated lens, chin protector, and hat bracket for full-brim helmets. ATPV 10 calories. Hardhat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name ARC-S2K3-PC-10
Material Shield- Polycarbonate; Bracket- Nylon
Color Shield- Green; Bracket- Blue
Product Weight 0.81 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Arc flash protection kit with standard coated lens, chin protector, and hat bracket for full-brim helmets. ATPV 10 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 10 cal/cm2. Excellent field of view & an ergonomic assembly that is convenient for the worker.
Applications This arc shield is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use this arc shield for electric arc welding exposures.
73
Product Data SheetPremium Arc Shield Kit #3 Model ARC-S2K3-PC-12
Arc flash protection kit with standard coated lens, chin protector, and hat bracket for full-brim helmets. ATPV 12 calories. Hardhat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name ARC-S2K3-PC-12
Material Shield- Polycarbonate; Bracket- Nylon
Color Shield- Green; Bracket- Blue
Product Weight 0.81 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Arc flash protection kit with standard coated lens, chin protector, and hat bracket for full-brim helmets. ATPV 12 cal/cm2.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 12 cal/cm2. Excellent field of view & an ergonomic assembly that is convenient for the worker.
Applications This arc shield is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use this arc shield for electric arc welding exposures.
74
Product Data SheetPremium Arc Shield Replacement Part Model IM22-AFA-PC-8
Premium coated arc flash protection window. ATPV 8 calories.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name IM22-AFA-PC-8
Material Polycarbonate
Color Green
Product Weight 0.44 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Premium coated arc flash protection window. ATPV 8 calories.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 8 cal/cm2. Excellent field of view & an ergonomic assembly that is convenient for the worker. Premium anti-fog and anti-abrasion coated.
Applications This arc shield is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use this arc shield for electric arc welding exposures.
75
Product Data SheetPremium Arc Shield Replacement Part Model IM23-AFA-PC-10
Premium coated arc flash protection window with chin protector. ATPV 10 calories.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name IM23-AFA-PC-10
Material Polycarbonate
Color Green
Product Weight 0.44 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Premium coated arc flash protection window with chin protector. ATPV 10 calories.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 10 cal/cm2. Excellent field of view & an ergonomic assembly that is convenient for the worker. Premium anti-fog and anti-abrasion coated.
Applications This arc shield is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use this arc shield for electric arc welding exposures.
76
Product Data SheetPremium Arc Shield Replacement Part Model IM23-AFA-PC-12
Premium coated arc flash protection window with chin protector. ATPV 12 calories.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name IM23-AFA-PC-12
Material Polycarbonate
Color Green
Product Weight 0.44 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Premium coated arc flash protection window with chin protector. ATPV 12 calories.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 12 cal/cm2. Excellent field of view & an ergonomic assembly that is convenient for the worker. Premium anti-fog and anti-abrasion coated.
Applications This arc shield is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use this arc shield for electric arc welding exposures.
77
Product Data SheetStandard Arc Shield Replacement Part Model IM22-ARC-PC-8
Standard coated arc flash protection window. ATPV 8 calories.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name IM22-ARC-PC-8
Material Polycarbonate
Color Green
Product Weight 0.44 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Standard coated arc flash protection window. ATPV 8 calories.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 8 cal/cm2. Excellent field of view & an ergonomic assembly that is convenient for the worker.
Applications This arc shield is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use this arc shield for electric arc welding exposures.
78
Product Data SheetStandard Arc Shield Replacement Part Model IM23-ARC-PC-10
Standard coated arc flash protection window with chin protector. ATPV 10 calories.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name IM23-ARC-PC-10
Material Polycarbonate
Color Green
Product Weight 0.44 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Standard coated arc flash protection window with chin protector. ATPV 10 calories.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 10 cal/cm2. Excellent field of view & an ergonomic assembly that is convenient for the worker.
Applications This arc shield is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use this arc shield for electric arc welding exposures.
79
Product Data SheetStandard Arc Shield Replacement Part Model IM23-ARC-PC-12
Standard coated arc flash protection window with chin protector. ATPV 12 calories.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name IM23-ARC-PC-12
Material Polycarbonate
Color Green
Product Weight 0.44 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Standard coated arc flash protection window with chin protector. ATPV 12 calories.
Competitive Advantage
This product maximizes the ATPV (Arc Thermal Protection Value) of 12 cal/cm2. Excellent field of view & an ergonomic assembly that is convenient for the worker.
Applications This arc shield is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use this arc shield for electric arc welding exposures.
80
Product Data SheetArc Shield Replacement Part Model CB2-HD
Replacement cap bracket for all calorie ratings of Paulson Arc Shield Kit #1 for slotted caps.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name CB2-HD
Material Nylon
Color Blue
Product Weight 0.19 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Replacement cap bracket for all calorie ratings of Paulson Arc Shield Kit #1 for slotted caps.
Competitive Advantage
This universal fitting bracket fits a wide variety of helmets with slots. Adjustable pivots allow easy adjustment of the pivot assembly. This unit is both dielectric and high temperature resistant.
Applications This bracket is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an arc shield for electric arc welding exposures.
81
Product Data SheetArc Shield Replacement Part Model CB6-HD
Replacement cap bracket for all calorie ratings of Paulson Arc Shield Kit #2 for slotted & non-slotted caps.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name CB6-HD
Material Nylon
Color Blue
Product Weight 0.22 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Replacement cap bracket for all calorie ratings of Paulson Arc Shield Kit #2 for slotted & non-slotted caps.
Competitive Advantage
This universal fitting bracket fits a wide variety of helmets with slots. Adjustable pivots allow easy adjustment of the pivot assembly. This unit is both dielectric and high temperature resistant.
Applications This bracket is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an arc shield for electric arc welding exposures.
82
Product Data SheetArc Shield Replacement Part Model HB2-HD
Replacement hat bracket for all calorie ratings of Paulson Arc Shield Kit #3 for full-brim helmets.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name HB2-HD
Material Nylon
Color Blue
Product Weight 0.22 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87+S
Description Replacement hat bracket for all calorie ratings of Paulson Arc Shield Kit #3 for full-brim helmets.
Competitive Advantage
This universal fitting bracket fits a wide variety of helmets with slots. Adjustable pivots allow easy adjustment of the pivot assembly. This unit is both dielectric and high temperature resistant.
Applications This bracket is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Do not use an arc shield for electric arc welding exposures.
83
Product Data SheetArc Goggle & Balaclava Kit Model BALA-ARC-KIT-ME
Arc flash protection goggle w/ nose shield. ATPV 38 calories. Medium energy, double layered balaclava with open face design. Hardhat not included.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name BALA-ARC-KIT-ME
Material Goggle: Lens- Polycarbonate, Frame/Strap- Silicone, Bezel- Nylon;Balaclava: 55% Carbon, 45% Kevlar
Color Goggle: Lens- Green, Frame/Strap-Black, Bezel- Blue;Balaclava: Green blend
Product Weight 0.98 lbs.Specification Goggle: ANSI Z87.1+S, ASTM F2178;
Balaclava: NFPA 70E, ASTM 1506, OSHA 29 CFR 1910.269
Description Arc flash protection goggle w/ nose shield. ATPV 38 cal/cm2. Medium energy open face design balaclava with one large eye port. Double layer Carbon/Kevlar blend fabric is to be worn tucked in to your approve arc shirt or jacket.
Competitive Advantage
The arc goggle and balaclava used in combination with an approved helmet provides an alternative to the use of beekeeper style arc hoods up to 38 cal/cm2. Soft double layer material and one large eye port make it comfortable for the wearer.
Applications This arc goggle & balaclava kit is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:http://www.paulsonmfg.com/videos.phpDo not use an arc goggle & balaclava for electric arc welding exposures.
84
Product Data SheetArc Goggle & Balaclava Kit Model BALA-ARC-KIT-HE
Arc flash protection goggle. ATPV 45 calories. High energy, triple layered balaclava with dual eye port design.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name BALA-ARC-KIT-HE
Material Goggle: Lens- Polycarbonate, Frame/Strap- Silicone;Balaclava: 100% Carbon X
Color Goggle: Lens- Green, Frame/Strap-Black;Balaclava: Black
Product Weight 0.98 lbs.Specification Goggle: ANSI Z87.1+S, ASTM F2178;
Balaclava: NFPA 70E, ASTM 1506, OSHA 29 CFR 1910.269
Description Arc flash protection goggle . ATPV 45 cal/cm2. High energy balaclava withdual eye port design and honeycomb breathing chamber. Triple layer stretch fabric is to be worn tucked in to your approve arc shirt or jacket.
Competitive Advantage
The arc goggle and balaclava used in combination with an approved helmet provides an alternative to the use of beekeeper style arc hoods up to 45 cal/cm2. Soft triple layer stretch material and honeycomb breathing chamber make it comfortable for the wearer.
Applications This arc goggle & balaclava kit is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:http://www.paulsonmfg.com/videos.phpDo not use an arc goggle & balaclava for electric arc welding exposures.
85
Product Data SheetArc Goggle Model 510-ARC-SN 12
Arc flash protection goggle w/ nose shield. ATPV 12 calories.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name 510-ARC-SN 12
Material Lens- Polycarbonate, Frame/Strap-Silicone, Bezel- Nylon
Color Lens- Green, Frame/Strap- Black, Bezel- Blue
Product Weight 0.45 lbs.
Specification ANSI Z87.1+S, ASTM F2178
Description Arc flash protection goggle w/ nose shield. ATPV 12 cal/cm2. To be worn with approved arc balaclava and helmet that meets or exceeds the hazard assessment. This goggle DOES NOT meet the NFPA 70E requirements for face protection.
Competitive Advantage
The arc goggle combined with an approved balaclava and helmet provides an alternative to the use of beekeeper style arc hoods up to 12 cal/cm2. Provides primary eye protection per ANSI Z87.1, and replaces the safety glasses requirement.
Applications This arc goggle is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:http://www.paulsonmfg.com/videos.phpDo not use an arc goggle for electric arc welding exposures.
86
Product Data SheetArc Goggle Model 510-ARC-SN 38
Arc flash protection goggle w/ nose shield. ATPV 38 calories.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name 510-ARC-SN 38
Material Lens- Polycarbonate, Frame/Strap-Silicone, Bezel- Nylon
Color Lens- Green, Frame/Strap- Black, Bezel- Blue
Product Weight 0.45 lbs.
Specification ANSI Z87.1+S, ASTM F2178
Description Arc flash protection goggle w/ nose shield. ATPV 38 cal/cm2. To be worn with approved arc balaclava and helmet that meets or exceeds the hazard assessment. This goggle DOES NOT meet the NFPA 70E requirements for face protection.
Competitive Advantage
The arc goggle combined with an approved balaclava and helmet provides an alternative to the use of beekeeper style arc hoods up to 38 cal/cm2. Provides primary eye protection per ANSI Z87.1, and replaces the safety glasses requirement.
Applications This arc goggle is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:http://www.paulsonmfg.com/videos.phpDo not use an arc goggle for electric arc welding exposures.
87
Product Data SheetArc Goggle Model 510-ARC-S 45
Arc flash protection goggle. ATPV 45 calories.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name 510-ARC-S 45
Material Lens- Polycarbonate, Frame/Strap-Silicone
Color Lens- Green, Frame/Strap- Black
Product Weight 0.45 lbs.
Specification ANSI Z87.1+S, ASTM F2178
Description Arc flash protection goggle. ATPV 45 cal/cm2. To be worn with approved arcbalaclava and helmet that meets or exceeds the hazard assessment. This goggle DOES NOT meet the NFPA 70E requirements for face protection.
Competitive Advantage
The arc goggle combined with an approved balaclava and helmet provides an alternative to the use of beekeeper style arc hoods up to 45 cal/cm2. Provides primary eye protection per ANSI Z87.1, and replaces the safety glasses requirement.
Applications This arc goggle is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:http://www.paulsonmfg.com/videos.phpDo not use an arc goggle for electric arc welding exposures.
88
Product Data SheetArc Balaclava Model ARC-BALA-ME
Medium energy, double layered balaclava with open face design.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name ARC-BALA-ME
Material 55% Carbon, 45% Kevlar
Color Green blend
Product Weight 0.53 lbs.
Specification NFPA 70E, ASTM 1506, OSHA 29 CFR 1910.269
Description Medium energy open face design balaclava with one large eye port. Double layer Carbon/Kevlar blend fabric is to be worn tucked in to your approve arc shirt or jacket.
Competitive Advantage
The arc balaclava used in combination with approved goggles and helmet provides an alternative to the use of beekeeper style arc hoods up to 38 cal/cm2. Soft double layer material and one large eye port make it comfortable for the wearer.
Applications This arc balaclava is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:http://www.paulsonmfg.com/videos.phpDo not use an arc balaclava for electric arc welding exposures.
89
Product Data SheetArc Balaclava Model ARC-BALA-HE
High energy, triple layered balaclava with dual eye port design.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product Details
Product Name ARC-BALA-HE
Material 100% Carbon X
Color Black
Product Weight 0.53 lbs.
Specification NFPA 70E, ASTM 1506, OSHA 29 CFR 1910.269
Description High energy arc balaclava with dualeye port design and honeycomb breathing chamber. Triple layer stretch fabric is to be worn tucked in to your approve arc shirt or jacket.
Competitive Advantage
The arc balaclava used in combination with approved goggles and helmet provides an alternative to the use of beekeeper style arc hoods up to 45 cal/cm2. Soft triple layer stretch material and honeycomb breathing chamber make it comfortable for the wearer.
Applications This arc balaclava is used in association with dielectric head protection and accessories to provide protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:http://www.paulsonmfg.com/videos.phpDo not use an arc balaclava for electric arc welding exposures.
90
Product Data Sheet3Phase® Accessory Model 3P-CWI
Cold weather inner lens for all calorie ratings of the 3Phase® lift-front arc shield.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name 3P-CWI
Material Polycarbonate
Color Clear
Product Weight 0.15 lbs.
Specification Meets NFPA 70E; Meets/Tested ASTM F2178; ANSI Z87.1
Description Cold weather inner lens for all calorie ratings of the 3Phase® lift-front arc shield. Features a permanent anti-fog coating.
Competitive Advantage
This product maximizes visibility by allowing for a clear view in extremely low temperature conditions. The permanent anti-fog on this inner lens is in addition to the permanent anti-fog coating already present on the 3Phase® lift-front arc shield.
Applications Used in association with dielectric protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
91
Product Data Sheet3Phase® Accessory Model 3P-FL
Streamlight® 2AAA PROPOLYMER® HAZ-LO® flashlight for use with the 3Phase® lift-front arc shield. Available for purchase only through Paulson’s OEM customers. Please contact Paulson for OEM contact information.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name 3P-FL
Material Flashlight- Thermoplastic; Lens-Polycarbonate; LED Bulb
Color Yellow/Black
Product Weight 0.12 lbs. (with batteries)
Brightness 60 lumens, 57m beam, runs 16 hours
Specification NFPA 70E
Description Streamlight® 2AAA PROPOLYMER® HAZ-LO® flashlight for use with the 3Phase® lift-front arc shield. Fits all current 3Phase® models with the 3P-ALM articulated light mount. ATPV 50 cal/cm2. Uses 2 AAA batteries.
Competitive Advantage
Intrinsically safe and water resistant.Light weight, utilizes 2 AAA batteries. Push-button tail switch for easy, one-handed operation even while wearing gloves. High-performance, anti-static thermoplastic material resistant to chemicals and solvents.
Applications Used in association with dielectric protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
92
Product Data Sheet3Phase® Accessory Model 3P-ALM
Articulated light mount designed to attach to the 3Phase® lift-front arc shield. Available for purchase only through Paulson’s OEM customers. Please contact Paulson for OEM contact information.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name 3P-ALM
Material Plastic Alloy
Color Black
Product Weight 0.025 lbs.
Specification NFPA 70E
Description Articulated light mount designed to attach to the 3Phase® lift-front arc shield. Fits all current 3Phase® models. ATPV 50 cal/cm2. Designed specifically to mount the Streamlight® 2AAA PROPOLYMER® HAZ-LO® flashlight.
Competitive Advantage
The ALM™ pivots both vertically and horizontally, and can be attached to the left, right, or both sides of the 3Phase® arc shield. Mount is attached to the inner frame of the shield, which allows the light to stay in the user’s field of vision even when the shield is lifted.
Applications ALM™ is used in association with dielectric protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
93
Product Data SheetArcVent™ Model AV-O
Octagonal ArcVent™ system measuring 4.5” in diameter. Designed to be sewn into the fabric of an arc flash hood or suit. Available for purchase only through Paulson’s OEM customers. Please contact Paulson for OEM contact information.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name AV-O
Material Flame retardant elastomer
Color Black
Product Weight 0.10 lbs.
Specification NFPA 70E
Description Octagonal ArcVent™ system measuring 4.5” in diameter. Designed to be sewn into the fabric of an arc flash hood or suit. The ArcVent™ ATPV is determined through testing with specific fabric types, up to 100 ca/cm2.
Competitive Advantage
Provides enhanced airflow with an indirect ventilation system that maximizes safety and comfort. Can be used in conjunction with a fan systemfor optimum airflow. Inexpensive cost provides for additional comfort benefits at a significant value.
Applications ArcVent™ is used in association with dielectric protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Assembled
Disassembled
94
Product Data SheetArcVent™ Model AV-H
Hexagonal ArcVent™ system measuring 4.5” in diameter. Designed to be sewn into the fabric of an arc flash hood or suit. Available for purchase only through Paulson’s OEM customers. Please contact Paulson for OEM contact information.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name AV-H
Material Flame retardant elastomer
Color Black
Product Weight 0.10 lbs.
Specification NFPA 70E
Description Hexagonal ArcVent™ system measuring 4.5” in diameter. Designed to be sewn into the fabric of an arc flash hood or suit. The ArcVent™ ATPV is determined through testing with specific fabric types, up to 100 ca/cm2.
Competitive Advantage
Provides enhanced airflow with an indirect ventilation system that maximizes safety and comfort. Can be used in conjunction with a fan systemfor optimum airflow. Inexpensive cost provides for additional comfort benefits at a significant value.
Applications ArcVent™ is used in association with dielectric protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Assembled
Disassembled
95
Product Data SheetArcVent™ Model AV-R
Rectangular ArcVent™ system measuring 3” x 6”. Designed to be sewn into the fabric of an arc flash hood or suit. Available for purchase only through Paulson’s OEM customers. Please contact Paulson for OEM contact information.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name AV-R
Material Flame retardant elastomer
Color Black
Product Weight 0.10 lbs.
Specification NFPA 70E
Description Hexagonal ArcVent™ system measuring 3” x 6”. Designed to be sewn into the fabric of an arc flash hood or suit. The ArcVent™ ATPV is determined through testing with specific fabric types, up to 100 ca/cm2.
Competitive Advantage
Provides enhanced airflow with an indirect ventilation system that maximizes safety and comfort. Can be used in conjunction with a fan systemfor optimum airflow. Inexpensive cost provides for additional comfort benefits at a significant value.
Applications ArcVent™ is used in association with dielectric protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
Assembled
Disassembled
96
Product Data SheetArc Shield Accessory Model A-ARC-BGL
Storage bag for arc shield with attached cap or hat bracket.
Paulson Manufacturing Corp.46752 Rainbow Canyon Road, Temecula, CA 92592
Phone: 951-676-2451 | Toll Free: 800-542-2451 | Fax: [email protected] | www.paulsonmfg.com
Product DetailsProduct Name A-ARC-BGL
Material Flame retardant brushed nylon
Color Black
Product Weight 0.34 lbs.
Description Storage bag for arc shield with attached cap or hat bracket. Includes Paulson logo.
Competitive Advantage
Storage bags recommended for protecting arc shields. Large enough to fit shield while attached to your preferred cap/hat bracket.
Applications The arc shield storage bag is used in association with dielectric protection from the hazards of arc flash. Arc flash is a defined hazard by NFPA-70E.
Comments See the videos on Paulson’s arc flash products at:
http://www.paulsonmfg.com/videos.php
97
Glossary
Product TerminologyAnti-FogA coating on a face shield that prevents fogging or misting in a wide range of temperatures and conditions.Bump CapA lightweight cap that does not meet the test requirements of a hard cap or hardhat.Cam-LockThe fastener on the cap/hat bracket or headgear that attaches to the face shield.Cap BracketA device that allows the mounting of a face shield to a hard cap.Chin ProtectorThe portion of a face shield that offers protection to the wearer’s chin, lower face, and neck. Cover LensA disposable pane of clear material to protect face shields and goggle lenses from damage.Cover PlateThe outer disposable cover lens for a welding helmet or goggle.Dark GreenANSI Z87.1 defines dark green as a face shield color transmitting visible light at 14%, +-4%.Die CutA fabrication process that cuts parts from sheets of plastic or other materials.DielectricA nonconductor of electrical current.
Plastics Used in Paulson Products
ABS Acrylonitrile Butadiene Styrene is a common general purpose
plastic.
Acetate Cellulose Acetate is a plastic that is available in polished optical
sheet. Products made from this material should not be used for
extremely low or high temperature applications.
HDPE High Density Polyethylene is a material used in opaque general
purpose components.
Nylon Characterized by toughness, optical quality, and resistance to
severe heat.
PETG Polyethylene Terephthalate Glycol is typically used for
packaging applications such as blister packs and bottles.
Polycarbonate Commonly referred to as Lexan®; characterized by toughness,
heat resistance, and optical quality.
Propionate Cellulose Propionate is a plastic used for injection molded
optical face shields used for high performance applications
Tritan Characterized by excellent resistance to a wide variety of
chemicals.
Product Terminology
3Phase® Paulson’s lift-front arc flash face shield.
A-TAC® Paulson’s line of structural & wildland firefighting and tactical
goggles.
ALM™ The flashlight system available as an accessory to the 3Phase®
lift-front arc shield that features an articulated light mount
designed to receive a 60-lumen Streamlight flashlight.
AmpShield® Paulson’s line of arc shields that feature premium coatings
and a transparent chin protector for excellent downward
vision.
Anti-Fog A coating on a face shield that prevents fogging or misting in a
wide range of temperatures and conditions.
98
Glossary
ArcVent™ The ventilation system featured on the 3Phase®lift-front arc
shield (front vents and side auditory vents) as well as the vent
patches designed to be sewn into arc hoods and suits.
ATPV Arc Thermal Protection Value expressed in calories/cm2. Used
to determine the appropriate arc flash PPE for the various
hazard risk categories as defined by NFPA 70E.
Balaclava A close-fitting garment covering the whole head and neck
except for parts of the face. Used in conjunction with Paulson’s
arc flash face shields.
Berry
Amendment
A statutory requirement that restricts the Department of
Defense (DoD) from using funds appropriated or otherwise
available to DoD for procurement of food, clothing, fabrics,
fibers, yarns, other made-up textiles, and hand or measuring
tools that are not grown, reprocessed, reused, or produced in
the United States. Although not directly related, all Paulson
products (except light body armor) are Berry Amendment
compliant.
Bump Cap A lightweight cap that does not meet the test requirements of a
hard cap or hardhat.
Calorie A unit of measuring energy or heat.
Cam-Lock The fastener on the cap/hat bracket or headgear that attaches
to the face shield.
Cap Bracket A device that allows the mounting of a face shield to a hard cap.
Chin Protector The portion of a face shield that offers protection to the
wearer’s chin, lower face, and neck.
Cobalt Blue A blue tint for face shields and goggles that reduces bright
yellow/orange (sodium line) of the visible light spectrum typical
of gas welding applications and furnace operations.
Cover Lens A disposable pane of clear material to protect face shields and
goggle lenses from damage.
Cover Plate The outer disposable cover lens for a welding helmet or goggle.
Dark Green ANSI Z87.1 defines dark green as a face shield color
transmitting visible light at 14%, +-4%.
99
Glossary
Die Cut A fabrication process that cuts parts from sheets of plastic or
other materials.
Dielectric A nonconductor of electrical current.
DK5 Paulson’s legacy riot face shields “Deployment Kit 5”. Field-
mount system with fabric strap attachment. Designed for PASGT
helmets only. Also available as a hard-mount system bolted to
the helmet.
DK6 Paulson’s universal riot face shields “Deployment Kit 6”. Field-
mount system with hard plastic alloy band attachment.
Designed to fit most PASGT, ACH, and MICH helmets.
DK7 Paulson’s universal tactical face shields “Deployment Kit 7”.
Field-mount system with hard plastic alloy band attachment.
Designed to fit most PASGT, ACH, and MICH helmets. Also
available with a rail-mount attachment system.
Face Shield A protective device commonly intended to shield the wearer’s
face, or portions thereof, in addition to the eyes, from certain
hazards. Face shields are secondary protectors and should be
used only with primary eye protection.
Face Shield Kit A face shield used in combination with headgear or mounting
device.
Flat Refers to the shape of the face shield. A flat face shield must
wrap around the spark guard and will not provide the fit of a
formed face shield.
Formed Refers to the shape of the face shield. A formed face shield
conforms to the shape of the spark guard or other attachments,
and is considered superior in fit, feel, and function to flat face
shields.
Hard Cap A safety helmet that has a front brim.
Hardhat A safety helmet that has a brim that extends around the
helmet.
Hat Bracket A device that allows the mounting of a face shield to a hardhat.
100
Glossary
HT™ A nanoparticle grey-tint for Paulson arc shields that allows
for highly transparent vision and enhanced color recognition
of electrical wires in the field
Injection
Molded
The method of forming objects from granular or powdered
plastics in which the materials are fed from a hopper to a
heated chamber in which it is softened, after which a ram or
screw forces the material into a mold. Pressure is maintained
until the mass has hardened sufficiently for removal from the
mold. Paulson injection molded shields feature improved
optical & physical characteristics, while the formed shape
also improves comfort & safety.
Metalized A coating on the front of a face shield that is designed to
reflect UV, IR, and reduce visible light.
Nanoparticles Inorganic material particles between 1 and 100 nanometers
(nm) in size with a surrounding interfacial layer. Their
application in Paulson shields allows the use of higher quality
polycarbonate material, resulting in higher impact value, as
well as slower degradation rate and compatibility with higher
quality protective coatings, all of which extend the service
life of the product.
Not Warranted
Shatterproof
A warning statement that applies to all face and eye
protection devices. The statement notes this potential for
any face and eye protection.
Primary
Protection
A device such as safety spectacles or goggles which may be
worn alone or in conjunction with a secondary protector.
QuickView Paulson’s line of flip-front face shields that feature a full-
coverage clear face shield with a 4” or 6” flip-front shield
available in shades 3-9, shade 5 cobalt blue, and gold-coated
Rail-Mount Refers to Paulson’s rail-mounted tactical face shields that
attach to ballistic helmets with side rail systems.
Safety/Cover
Plate
A lens that can be used interchangeably as a cover plate
and/or safety plate in welding applications.
Secondary
Protection
A device worn only in conjunction with a primary protector.
Face shields are classified as secondary protectors.
101
Glossary
Shade 5 ANSI Z87.1 defines shade 5 as a face shield color that meets
specific UV, IR, and visible light requirements. The visible
light requirement is a maximum of 3.16% and minimum of
1.18%.
Spark Guard The portion of a headgear that protects the wearer’s
forehead. Also known as a crown protector.
102
National Safety Standards Met by Paulson Products
STANDARD DEFINITION GOVERNING BODY
ANSI Z87.1 Provides minimum requirements for eye and
face protective devices in the workplace,
including selection, use and maintenance of the
devices.
American National
Standards Institute
ANSI Z87.1+ Provides minimum requirements for high
velocity impact eye and face protective devices
in the workplace, including selection, use and
maintenance of the devices.
American National
Standards Institute
ANSI
Z87.1+S
Provides minimum requirements for high
velocity impact specialty eye and face protective
devices in the workplace, including selection,
use and maintenance of the devices.
American National
Standards Institute
ASTM F2178 Standard test method for determining the arc
rating and standard specification for eye or face
protective products.
American Society for
Testing & Materials
NFPA 70E The standard for electrical safety in the
workplace.
National Fire
Protection
Association
NFPA 1951 The standard on protective ensembles for
technical rescue Incidents.
National Fire
Protection
Association
Glossary
103
NFPA 1971 Protects firefighting personnel by establishing
minimum levels of protection from thermal,
physical, environmental, and blood borne
pathogen hazards encountered during structural
and proximity firefighting operations.
National Fire
Protection
Association
NFPA 1977 The standard on protective clothing and
equipment for wildland firefighting.
National Fire
Protection
Association
NIJ 0104.02 The standard that establishes requirements and
methods of test for helmets and face shields to
be worn by law enforcement officers during civil
disturbances, riots, or other situations that pose
a threat of injury from blows to the head
National Institute of
Justice
Thermal Properties of Plastics Used
157°170°
278°
163°
265°
162°
201°
0
50
100
150
200
250
300
Heat Distortion Temperature (Fahrenheit)
104
Impact Values of Plastics Used
105
3.5
1.5
3.5
18
10
0
2
4
6
8
10
12
14
16
18
20
Acetate HDPE PETG Polycarbonate Propionate
Izod Impact Value (J/m2)
Light Transmittance Performance
85%
23%14%
2%0
10
20
30
40
50
60
70
80
90
Clear Medium Green Dark Green Shade 5
Light Transmittance (%)
106
Top Related