Weight per piece (Trim cap) : 2.25 kg / 4.96 lbs
Weight total (Trim cap & Base) : 3.16 kg / 6.96 lbs
Model : FA-HTS-1201
Aluminum Siding AccessoriesH-Trim Cap and Base
1. ALUMINUM6063-T5 Aluminum extrusion 1.40 mm (0.055 in) thick recognized as the industry’s first choice for its exceptional durability.
Accessory trim and base are joined together by snap fit allowing for seamless installation without visible screws.
Installation can be made both vertically and horizontally.
2. PRIMER COATSpecially formulated primer coat ±1.2 mils (30.48 μm) thick assures optimal adhesion between aluminum and ink.
3. HD PRINTINGHigh-definition digital inkjet print ±1 mil (25.4 μm) thick of a wide range of textures with outstanding color variations.
4. Z-CLEARA protective clear coat ±1.2 mils (30.48 μm) thick is applied to provide long-term protection against fading.
Drawing by: JCC
Length : 3.65 m / 12 ft
Job # : Color : Date :
Initials :
Name :
Product : Aluminum siding H-Trim Cap and Base
Material : Aluminum 6063-T5
Tests & Certifications*. CAN/ULC S102 - Fire Resistance. CAN/ULC S114 - Fire Resistance. ASTM E84 - Fire Resistance. NFPA 285 - Fire Resistance. ASTM D6578 - Graffiti Resistance. ASTM G155 - UV Resistance. ISO 7895 / ASTM E330 - Wind Load. ISO 7895 - Impact Resistance. ASTM D3359 - Adhesion testing. Florida Building Code (FBC) compliance. LEED V4
* see website for full details
TECHNICAL DATA SHEET
44.45 mm1.750 in
16.36 mm0.644 in1
2
3
4
Date: 11/11/20Sheet size: 8.5’’ x 11’’
Weight per piece (Trim cap) : 2.23 kg / 4.92 lbs
Weight total (Trim cap & Base) : 3.14 kg / 6.92 lbs
Model : FA-JTL-1201
Drawing by: JCC
Length : 3.65 m / 12 ft
Job # : Color : Date :
Initials :
Name :
Product : Aluminum siding 1-3/4’’ J-Trim Cap + Base
Material : Aluminum 6063-T5
Tests & Certifications*. CAN/ULC S102 - Fire Resistance. CAN/ULC S114 - Fire Resistance. ASTM E84 - Fire Resistance. NFPA 285 - Fire Resistance. ASTM D6578 - Graffiti Resistance. ASTM G155 - UV Resistance. ISO 7895 / ASTM E330 - Wind Load. ISO 7895 - Impact Resistance. ASTM D3359 - Adhesion testing. Florida Building Code (FBC) compliance. LEED V4
* see website for full details
TECHNICAL DATA SHEET
44.45 mm1.750 in
16.36 mm0.644 in1
2
3
4
Aluminum Siding Accessories1-3/4’’ J-Trim Cap and Base
1. ALUMINUM6063-T5 Aluminum extrusion 1.40 mm (0.055 in) thick recognized as the industry’s first choice for its exceptional durability.
Accessory trim and base are joined together by snap fit allowing for seamless installation without visible screws.
Installation can be made both vertically and horizontally.
2. PRIMER COATSpecially formulated primer coat ±1.2 mils (30.48 μm) thick assures optimal adhesion between aluminum and ink.
3. HD PRINTINGHigh-definition digital inkjet print ±1 mil (25.4 μm) thick of a wide range of textures with outstanding color variations.
4. Z-CLEARA protective clear coat ±1.2 mils (30.48 μm) thick is applied to provide long-term protection against fading.
Date: 11/11/20Sheet size: 8.5’’ x 11’’
Weight per piece (Trim cap) : 1.93 kg / 4.25 lbs
Weight total (Trim cap & Base) : 2.83 kg / 6.25 lbs
Model : FA-JTS-1201
1. ALUMINUM6063-T5 Aluminum extrusion 1.40 mm (0.055 in) thick recognized as the industry’s first choice for its exceptional durability.
Accessory trim and base are joined together by snap fit allowing for seamless installation without visible screws.
Installation can be made both vertically and horizontally.
2. PRIMER COATSpecially formulated primer coat ±1.2 mils (30.48 μm) thick assures optimal adhesion between aluminum and ink.
3. HD PRINTINGHigh-definition digital inkjet print ±1 mil (25.4 μm) thick of a wide range of textures with outstanding color variations.
4. Z-CLEARA protective clear coat ±1.2 mils (30.48 μm) thick is applied to provide long-term protection against fading.
Drawing by: JCC
Length : 3.65 m / 12 ft
Job # : Color : Date :
Initials :
Name :
Product : Aluminum siding 1’’ J-Trim Cap and Base
Material : Aluminum 6063-T5
Tests & Certifications*. CAN/ULC S102 - Fire Resistance. CAN/ULC S114 - Fire Resistance. ASTM E84 - Fire Resistance. NFPA 285 - Fire Resistance. ASTM D6578 - Graffiti Resistance. ASTM G155 - UV Resistance. ISO 7895 / ASTM E330 - Wind Load. ISO 7895 - Impact Resistance. ASTM D3359 - Adhesion testing. Florida Building Code (FBC) compliance. LEED V4
* see website for full details
TECHNICAL DATA SHEET
1
2
3
4
28.70 mm1.130 in
16.36 mm0.644 in
Aluminum Siding Accessories1’’ J-Trim Cap and Base
Date: 11/11/20Sheet size: 8.5’’ x 11’’
Weight per piece (Trim cap) : 1.64 kg / 3.62 lbs
Weight total (Trim cap & Base) : 3.28 kg / 7.23 lbs
Model : FA-OSC-1201
1. ALUMINUM6063-T5 Aluminum extrusion 1.40 mm (0.055 in) thick recognized as the industry’s first choice for its exceptional durability.
Accessory trim and base are joined together by snap fit allowing for seamless installation without visible screws.
Installation can be made both vertically and horizontally.
2. PRIMER COATSpecially formulated primer coat ±1.2 mils (30.48 μm) thick assures optimal adhesion between aluminum and ink.
3. HD PRINTINGHigh-definition digital inkjet print ±1 mil (25.4 μm) thick of a wide range of textures with outstanding color variations.
4. Z-CLEARA protective clear coat ±1.2 mils (30.48 μm) thick is applied to provide long-term protection against fading.
Drawing by: JCC
Length : 3.65 m / 12 ft
Job # : Color : Date :
Initials :
Name :
Product : Aluminum siding Outside Corner + Base
Material : Aluminum 6063-T5
Tests & Certifications*. CAN/ULC S102 - Fire Resistance. CAN/ULC S114 - Fire Resistance. ASTM E84 - Fire Resistance. NFPA 285 - Fire Resistance. ASTM D6578 - Graffiti Resistance. ASTM G155 - UV Resistance. ISO 7895 / ASTM E330 - Wind Load. ISO 7895 - Impact Resistance. ASTM D3359 - Adhesion testing. ASTM D4060 (CS-17) - Abrasion Resistance. Florida Building Code (FBC) compliance. LEED V4
* see website for full details
TECHNICAL DATA SHEET
16.36 mm0.644 in
35.15 mm1.383 in
1
2
3
4
Aluminum Siding AccessoriesOutside Corner Cap and Base
Date: 11/11/20Sheet size: 8.5’’ x 11’’
Weight per piece : 1.16 kg / 2.56 lbs
Model : FA-SSV-1201
Drawing by: JCC
Length : 3.65 m / 12 ft
Job # : Color : Date :
Initials :
Name :
Product : Aluminum siding Starter Strip
Material : Aluminum 6063-T5
Tests & Certifications*. CAN/ULC S102 - Fire Resistance. CAN/ULC S114 - Fire Resistance. ASTM E84 - Fire Resistance. NFPA 285 - Fire Resistance. ASTM D6578 - Graffiti Resistance. ASTM G155 - UV Resistance. ISO 7895 / ASTM E330 - Wind Load. ISO 7895 - Impact Resistance. ASTM D3359 - Adhesion testing. Florida Building Code (FBC) compliance. LEED V4
* see website for full details
TECHNICAL DATA SHEET
46.48 mm1.830 in
9.86 mm0.388 in
1
2
3
4
1. ALUMINUM6063-T5 Aluminum extrusion 1.50 mm (0.060 in) thick, recognized as the industry’s first choice for its exceptional durability.
Two oblong holes 1’’ x 0.125’’, (25.4 mm x 3.175 mm), spaced 2’’ (50 mm) apart, all being repeated every 4’’ (101 mm) to allow for fast and easy screw insertion.
Works with every profile and plank width.
Installation can be made both vertically and horizontally.
2. PRIMER COATSpecially formulated primer coat ±1.2 mils (30.48 μm) thick assures optimal adhesion between aluminum and ink.
3. HD PRINTINGHigh-definition digital inkjet print ±1 mil (25.4 μm) thick of a wide range of textures with outstanding color variations.
4. Z-CLEARA protective clear coat ±1.2 mils (30.48 μm) thick is applied to provide long-term protection against fading.
Aluminum Siding AccessoriesStarter Strip
Date: 11/11/20Sheet size: 8.5’’ x 11’’
Top Related