A L U M I N O U SOUTDOOR LIGHTING PRODUCTS
INTRODUCTION
This catalogue has been designed to assist you in selecting an area
lighting product, which will meet your specific requirements. The diverse
selection of pole sizes and mounting bracket options offered within
this catalogue i.e. architectural, roadway traffic and tapered elliptical
brackets, should accommodate most of your lighting needs. However,
if the scope of your specifications or requirements cannot be fulfilled
with these standard products, please contact us: we can custom-design
an array of products to meet any criteria or specification.
CONTACT INFORMATION
Address: 600 Ferguson Avenue North Hamilton, Ontario L8L 4Z9
Telephone: 1-877-625-7240905-526-1771
Fax: 1-888-700-8656905-526-6161
Email: [email protected]
Website: www.aluminous.com
TERMS AND CONDITIONSMinimum Billing: $75.00
TERMS Net thirty days upon approved credit.
PRICES Written quotations are valid for sixty (60) days. All other prices are subject to change withoutnotice.
TITLE An order is not binding and processed until written approval has been received by Aluminous. Titleof goods pass onto purchaser upon receipt of approval by Aluminous or when goods are loaded fortransportation to the Ship to Address, whichever is sooner. Aluminous reserves the right to retainor resume possession until the purchase is paid for in full.
DELIVERY All materials are sold F.O.B. factory, delivery is on a prepaid and charge basis. All goods areinspected before dispatch. Any claims for loss or damage in shipment or unloading shall be filedwith the carrier by the consignee. Separate shipments of anchor bolts etc. will be subject to additional freight charges.
SHIPMENT& STORAGE Shipment of goods must be made within thirty (30) days of completion, or stocking charge of 2%
per month will be added. This applies to all orders received with a delivery request date and RUSHorders. Poles not erected immediately must be unwrapped by purchaser and stored above ground.Aluminous is not responsible for soil erosion to finish caused by improper storage.
WARRANTY All materials are carefully inspected before shipment and are guaranteed to be free of material and workmanship defects. Any product which is proven defective in material or workmanship will be repairedor replaced by Aluminous, provided that such claim is made within one year from date of shipment anddefect proven from normal use for purpose intended. Aluminous will not be deemed liable for labor costsincurred to dismantle or re-install the product and transportation cost to and from Aluminous Plant ifreplacement is deemed necessary.
RETURN OF MATERIAL Written authorization must be given by Aluminous and materials forwarded prepaid. A
credit shall be issued minus outgoing freight, cancellation charges and restocking charges if applicable.
CANCELLATION If the purchaser desires to cancel an order, Aluminous must give written acceptance of cancellation in writing. The cancellation charges shall be the cost incurred by Aluminous, but in nocase less than 10% of the value of the order.
ORDER PROCESSING APPROVED DRAWING have to be produced before the order is released for manufacturing.
HOLD ORDERS will not be processed until released by the purchaser, at which time they are subject to price review.BLANKET ORDERS are valid only for the year the order is placed. All outstanding stock will becharged to the customer one year from the initial date the order was placed and will be shipped tothe customer's designated storage area, or stocking charges apply. SUBSTITUTION: Aluminous reserves the right to substitute specifications.
BACK CHARGES Aluminous will not accept any back charges for late delivery or charges for reworking on site unlessAluminous has issued written authority.
The wind speed map shows the maximum steady wind expected within a 50-year period ofrecurrence at an elevation of 30 feet above ground. If standards are mounted above grade,please call for assistance if needs arise. Since winds are unpredictable and usually involve gustsEPA calculation allows for a 1.3 gust factor.
Aluminous Outdoor Lighting Products have been designed to withstand a specific wind load foreach lighting standard. Please note: selecting the proper size pole for a specific applicationrequires one to know the EPA of the total number of fixtures. Because of the different windvelocities in any geographical area reference should be made to the area where the pole isbeing installed. Proper selection should be made from the Canadian and U.S. Wind Speed Map.
Aluminous Outdoor Lighting Products EPA rating is in conformity with the requirements of theAASHTO Standard specifications for structural support for poles and arm brackets.
Please note: All maximum wind speeds are measured in mph (miles per hour).
W I N D S P E E D M A P
NORTH WESTTERRITORIES
YUKONTERRITORIES
ALASKA
BRITISHCOLUMBIA ALBERTA
MANITOBA
ONTARIO
QUEBEC
NEWFOUNDLAND
MEXICO
C A N A D A
U S A
SASKATCHEWAN
80100
100
70
90
90
90
70
70
70
7060
60
80
80
100
100
100
100
110
110
110
110
100
100
100
120
100
10090
90
90
90
90
90
90
80
80
80
70
70
7070
70
T A B L E O F C O N T E N T SA l u m i n o u s L i g h t i n g P r o d u c t s
ARCHITECTURAL AREA LIGHTING
Steel Poles: SRDB: Straight round steel lighting pole, direct burial: 3 & 4SRSM: Straight round steel lighting pole, surface mounted: 3,4,5 & 6RTS: Round tapered steel poleOTSP: Octagonal tapered steel poleSSQ: Straight square steel lighting pole, surface mounted: 3,4,5 & 6STS: Square tapered steel pole: 4,5 & 6
Aluminum Poles: SRAL: Straight round aluminum lighting pole, surface mountedRATP: Round aluminum tapered polesSSAL: Straight square aluminum lighting pole, surface mounted
Decorative Base Poles: Port MariaMontegoPort RoyalOld HarbourPort AntonioSante FeMandeville
Series 2000 Custom Basket UpliteDesign Poles & Arms: Basket Downlite
OceanicLakesideSanta DomingoTapered Fluted PolesStep Steel Poles - SSSP
Custom Poles & Fixtures: Pole with single fixturePole with dual fixtures and banner armsPole with fixture, banner arms and spotlightPole with single spotlightPole with dual spotlightPole with banner arms and spotlightFixture for mounting without pole
ROADWAY: Davit D PolesTapered Elliptical E Bracket PolesTruss Arm Poles
TRAFFIC: Round Tapered Aluminum Traffic Poles, Top MountedRound Tapered Aluminum Traffic Poles, for Single Member Arm (SMA)Signal Mast Arm Brackets (SMA)Traffic Signal Mast Arm
CUSTOM ARM BRACKETS: Tapered Elliptical Aluminum BracketsBradwick Arm BracketSingle Bend Colonial Braket ArmsDouble Bend Bramptom Arms
FLAG POLES: Commercial Ground Set Flagpole
ACCESSORIES: Transformer BaseBrampton Pole CapTubular & Angle Iron CrossarmBull Horn BracketTubular Tenon BracketTubular Custom BracketCustom Banner ArmsAnchor BoltsOptions & Extras
STEEL POLES
aluminous.com
SERIES SRDB 3 SPECIFICATIONSStraight Round Steel Lighting Pole: Direct Burial
aluminous.com
NOTE: Drawings are Pictorial Only
NOTES:
All poles are complete with tenon, hand hole cover and ground lug.
All base mounted poles are complete with galvanized steel anchor bolts(c/w 2 nuts, 2 washers) and base cover.
Poles are Polyester coated Standard Black or Dark Bronze. All other colours and galvanized subject to additional charges.
Material: Base Plate and AnchorBolts - 44 kpsi Min. Yield Shaft - 50 kpsi Min. Yield
Anchor Bolt Projection: 3 - 4 inchesConcrete Min. Yield: 3500 psiWelding Conforms to CSA W47.1 and W47.2
SERIES SRDB 3 SPECIFICATIONSStraight Round Steel Lighting Pole: Direct Burial
3 DIAMETER
CatalogueNumber
Tube Size(inches)
Mounting Height(Feet)
Weight(Lbs)
MaximumEPA @ 80 MPH
SRDB3-12 3 12 69 10
SRDB4-12 3 13 78 9
SRDB4-15 3 14 86 8
SRDB4-18 3 19 98 7
SERIES SRDB 4 SPECIFICATIONSStraight Round Steel Lighting Pole: Direct Burial
aluminous.com
NOTE: Drawings are Pictorial Only
NOTES:
All poles are complete with tenon, hand hole cover and ground lug.
All base mounted poles are complete with galvanized steel anchor bolts(c/w 2 nuts, 2 washers) and base cover.
Poles are Polyester coated Standard Black or Dark Bronze. All other colours and galvanized subject to additional charges.
Material: Base Plate and AnchorBolts - 44 kpsi Min. Yield Shaft - 50 kpsi Min. Yield
Anchor Bolt Projection: 3 - 4 inchesConcrete Min. Yield: 3500 psiWelding Conforms to CSA W47.1 and W47.2
SERIES SRDB 4 SPECIFICATIONSStraight Round Steel Lighting Pole: Direct Burial
4 DIAMETER
CatalogueNumber
Tube Size(inches)
Mounting Height(Feet)
Weight(Lbs)
MaximumEPA @ 80 MPH
SRDB4-10 4 10 84 14
SRDB4-12 4 12 95 12
SRDB4-15 4 15 110 10
SRDB4-18 4 18 130 9
SRDB4-20 4 20 145 7
SRDB4-24 4 24 166 6
SERIES SRSM 3 SPECIFICATIONSStraight Round Steel Lighting Pole: Surface Mounted
aluminous.com
NOTE: Drawings are Pictorial Only
NOTES:
All poles are complete with tenon, hand hole cover and ground lug.
All base mounted poles are complete with galvanized steel anchor bolts(c/w 2 nuts, 2 washers) and base cover.
Poles are Polyester coated Standard Black or Dark Bronze. All other colours and galvanized subject to additional charges.
Material: Base Plate and AnchorBolts - 44 kpsi Min. Yield Shaft - 50 kpsi Min. Yield
Anchor Bolt Projection: 3 - 4 inchesConcrete Min. Yield: 3500 psiWelding Conforms to CSA W47.1 and W47.2
SERIES SRSM 3 SPECIFICATIONSStraight Round Steel Lighting Pole: Surface Mounted
3 DIAMETER
CatalogueNumber
Tube Size(inches)
MountingHeight(Feet)
Weight(Lbs)
Anchor Bolt Dia.(inches)
BCD(inches)
MaximumEPA @ 80
MPH
SRSM3-08 3 8 41 5/8 8 12
SRSM3-10 3 10 56 5/8 8 10
SRSM3-12 3 12 69 5/8 8 9
SRSM3-15 3 15 82 5/8 8 8
SERIES SRSM 4 SPECIFICATIONSStraight Round Steel Lighting Pole: Surface Mounted
aluminous.com
NOTE: Drawings are Pictorial Only
NOTES:
All poles are complete with tenon, hand hole cover and ground lug.
All base mounted poles are complete with galvanized steel anchor bolts(c/w 2 nuts, 2 washers) and base cover.
Poles are Polyester coated Standard Black or Dark Bronze. All other colours and galvanized subject to additional charges.
Material: Base Plate and AnchorBolts - 44 kpsi Min. Yield Shaft - 50 kpsi Min. Yield
Anchor Bolt Projection: 3 - 4 inchesConcrete Min. Yield: 3500 psiWelding Conforms to CSA W47.1 and W47.2
SERIES SRSM 4 SPECIFICATIONSStraight Round Steel Lighting Pole: Surface Mounted
4 DIAMETER
CatalogueNumber
Tube Size(inches)
MountingHeight(Feet)
Weight(Lbs)
Anchor Bolt Dia.(inches)
BCD(inches)
MaximumEPA @ 80
MPH
SRSM4-08 4 8 75 3/4 8 15
SRSM4-10 4 10 84 3/4 8 12
SRSM4-12 4 12 95 3/4 8 11
SRSM4-15 4 15 112 3/4 8 10
SRSM4-18 4 18 130 3/4 8 8
SRSM4-20 4 20 142 3/4 8 7
SRSM4-24 4 24 215 1 10 5
SERIES SRSM 5 SPECIFICATIONSStraight Round Steel Lighting Pole: Surface Mounted
aluminous.com
NOTE: Drawings are Pictorial Only
NOTES:
All poles are complete with tenon, hand hole cover and ground lug.
All base mounted poles are complete with galvanized steel anchor bolts(c/w 2 nuts, 2 washers) and base cover.
Poles are Polyester coated Standard Black or Dark Bronze. All other colours and galvanized subject to additional charges.
Material: Base Plate and AnchorBolts - 44 kpsi Min. Yield Shaft - 50 kpsi Min. Yield
Anchor Bolt Projection: 3 - 4 inchesConcrete Min. Yield: 3500 psiWelding Conforms to CSA W47.1 and W47.2
SERIES SRSM 5 SPECIFICATIONSStraight Round Steel Lighting Pole: Surface Mounted
5 DIAMETER
CatalogueNumber
Tube Size(inches)
MountingHeight(Feet)
Weight(Lbs)
Anchor Bolt Dia.(inches)
BCD(inches)
MaximumEPA @ 80
MPH
SRSM5-15 5 15 105 Approx. 3/4 10 25
SRSM5-20 5 20 128 Approx. 3/4 10 20
SRSM5-25 5 25 152 Approx. 3/4 10 11
SERIES SRSM 6 SPECIFICATIONSStraight Round Steel Lighting Pole: Surface Mounted
aluminous.com
NOTE: Drawings are Pictorial Only
NOTES:
All poles are complete with tenon, hand hole cover and ground lug.
All base mounted poles are complete with galvanized steel anchor bolts(c/w 2 nuts, 2 washers) and base cover.
Poles are Polyester coated Standard Black or Dark Bronze. All other colours and galvanized subject to additional charges.
Material: Base Plate and AnchorBolts - 44 kpsi Min. Yield Shaft - 50 kpsi Min. Yield
Anchor Bolt Projection: 3 - 4 inchesConcrete Min. Yield: 3500 psiWelding Conforms to CSA W47.1 and W47.2
SERIES SRSM 6 SPECIFICATIONSStraight Round Steel Lighting Pole: Surface Mounted
6 DIAMETER
CatalogueNumber
Tube Size(inches)
MountingHeight(Feet)
Weight(Lbs)
Anchor Bolt Dia.(inches)
BCD(inches)
MaximumEPA @ 80
MPH
SRSM6-20 6 20 220 Approx. 1 14 30
SRSM6-25 6 25 430 Approx. 1 14 25
SRSM6-30 6 30 515 Approx. 1 14 15
SRSM6-35 6 35 610 Approx. 1 14 11
SRSM6-40 6 40 710 Approx. 1 14 9
SERIES RTS SPECIFICATIONSRound Tapered Steel Pole
aluminous.com
NOTE: Drawings are Pictorial Only
Polyester Finish Colourto be Specified
Finish options (Specify as)Dark Bronze
BlackGalvanized
Other colours available-specify
Specifications
SHAFT One or two piece construction fabricated from coil stock, weldable grade, hot rolled commercial quality carbon steel - - guaranteed minimum yield strength 55,000 PSI. Shaft has uniform taper or approximately .14 per foot. Wall thickness 11 GA(.120 wall) or 7Ga (.180 wall) as specified (see ordering information. Reinforcedhand hole is furnished with cover.
BASE PLATE Fabricated from structural quality hot rolled steel. Meets or exceeds minimum yieldstrength of 36,000 PSI. Base telescopes and is circumferentially welded to poleshaft.
ANCHORAGE Hot rolled steel bar - - minimum yield strength of 50,000 PSI. bolts have L bendon one end and are threaded on the other end. Bolts are galvanized and are furnished with two nuts and washers.
BASE COVER Fabricated from heavy gauge quality carbon steel. Two piece cover conceals base.(optional)
Polyester Finish Colour to be Specified
Finish options (specify as) Dark Bronze, Black, Galvanized, Other colours available-specify
SERIES RTS SPECIFICATIONSRound Tapered Steel Pole
CatalogueNumber
A Pole
Height
BShaftSize
CGauge
DBolt
Circle
EAnchorage
RTS 20-11 20 6.0 x 3.0 11 10 1 x 36 x 4
RTS 25-11 25 7.0 x 3.5 11 10 1 x 36 x 4
RTS 30-11 30 8.0 x 4.0 11 14 1 x 36 x 4
RTS 35-11 35 8.5 x 3.5 11 14 1 x 36 x 4
RTS 40-11 39 9.0 x 3.6 11 14 1x 36 x 4
RTS 40-7 39 9.0 x 3.6 7 14 1 1/4 x 42 x 4
SERIES OTSP SPECIFICATIONSO c t a g o n a l Ta p e r e d S t e e l P o l e
aluminous.com
NOTE: Drawings are Pictorial Only
BCD(Inches)
NOTES:
All poles are complete with tenon, hand hole cover and ground lug.
All base mounted poles are complete with galvanized steel anchor bolts.(c/w 2 nuts, 2 washers) and base cover.
Polyester coated Standards Black, Dark Bronze or White. All other coloursand galvanized subject to additional charges.
Material: Base Plate and Anchor Bolts - 44 kpsi Min. YieldBolts - 50 kpsi Min. YieldShaft - 50 kpsi Min. Yield
Welding Conforms to CSA W47.1 and W47.2
SERIES OTSP SPECIFICATIONSO c t a g o n a l Ta p e r e d S t e e l P o l e
CatalogueNumber
MaxEPA
Mtg. Height(Feet)
Weight(lbs)
Anchor BoltProjection
OTSP-10 18.9 10' 75 8.5" 3/4 x 24" 3"
OTSP-12 14.1 12' 83 8.5" 3/4 x 24" 3"
OTSP-15 9.1 15' 105 8.5" 3/4 x 24" 3"
OTSP-20 8.1 20' 140 8.5" 1" x 30" 3"
OTSP-24 6.5 25' 180 10" 1" x 30" 3"
OTSP-30 8 30' 245 10" 1" x 36" 4"
OTSP-35 7.5 35' 310 14" 1" x 36" 4"
OTSP-40 5 40' 390 14" 1 1/8 x 40" 4.5"
LARGER OTSP POLES ARE AVAILABLE UPON REQUEST
Anchor BoltsDia. (inches)
SERIES SSQ 4 SPECIFICATIONSStraight Square Steel Lighting Pole: Surface Mounted
aluminous.com
NOTE: Drawings are Pictorial Only
NOTES:
All poles are complete with tenon or drilled one side (please specify with detail)Additional fixture drillings are subject to additional charges
All poles are complete with top cap, hand hole cover and galvanized steel anchor bolts(c/w 2 nuts, 2 washers) and base cover.
Poles are Polyester coated Standard Black or Dark Bronze. All other colours and galvanized subject to additional charges.
* INDICATES EXTRA HEAVY-DUTY
Material: Base Plate and AnchorBolts - 44 kpsi Min. Yield Shaft - 50 kpsi Min. Yield
Anchor Bolt Projection: 3 - 4 inchesConcrete Min. Yield: 3500 psiWelding Conforms to CSA W47.1 and W47.2
SERIES SSQ 4 SPECIFICATIONSStraight Square Steel Lighting Pole: Surface Mounted
CatalogueNumber
Tube Size(inches)
MountingHeight(Feet)
Weight(Lbs)
Anchor Bolt Dia.(inches)
BCD(inches)
MaximumEPA @ 80
MPH
SSQ4-08 4 8 80 3/4 8 14
SSQ4-10 4 10 90 3/4 8 11
SSQ4-12 4 12 105 3/4 8 10
SSQ4-15 4 15 130 3/4 8 10
SSQ4-18 4 18 150 3/4 8 9
SSQ4-20 4 20 160 3/4 8 8
*SSQ4-20 4 20 170 3/4 8 8
*SSQ4-24 4 24 260 1 10 10
SERIES SSQ 5 SPECIFICATIONSStraight Square Steel Lighting Pole: Surface Mounted
aluminous.com
NOTE: Drawings are Pictorial Only
NOTES:
All poles are complete with tenon or drilled one side (please specify with detail)Additional fixture drillings are subject to additional charges
All poles are complete with top cap, hand hole cover and galvanized steel anchor bolts(c/w 2 nuts, 2 washers) and base cover.
Poles are Polyester coated Standard Black or Dark Bronze. All other colours and galvanized subject to additional charges.
* INDICATES EXTRA HEAVY-DUTY
Material: Base Plate and AnchorBolts - 44 kpsi Min. Yield Shaft - 50 kpsi Min. Yield
Anchor Bolt Projection: 3 - 4 inchesConcrete Min. Yield: 3500 psiWelding Conforms to CSA W47.1 and W47.2
SERIES SSQ 5 SPECIFICATIONSStraight Square Steel Lighting Pole: Surface Mounted
CatalogueNumber
Tube Size(inches)
MountingHeight(Feet)
Weight(Lbs)
Anchor Bolt Dia.(inches)
BCD(inches)
SSQ5-20 5 20 220 1 10 16
SSQ5-25 5 25 290 1 10 10
SSQ5-30 5 30 325 1 10 10
*SSQ5-30 5 30 423 1 10 12
MaximumEPA @ 80
MPH
SERIES SSQ 6 SPECIFICATIONSStraight Square Steel Lighting Pole: Surface Mounted
aluminous.com
NOTE: Drawings are Pictorial Only
NOTES:
All poles are complete with tenon or drilled one side (please specify with detail)Additional fixture drillings are subject to additional charges
All poles are complete with top cap, hand hole cover and galvanized steel anchor bolts(c/w 2 nuts, 2 washers) and base cover.
Poles are Polyester coated Standard Black or Dark Bronze. All other colours and galvanized subject to additional charges.
Material: Base Plate and AnchorBolts - 44 kpsi Min. Yield Shaft - 50 kpsi Min. Yield
Anchor Bolt Projection: 3 - 4 inchesConcrete Min. Yield: 3500 psiWelding Conforms to CSA W47.1 and W47.2
SERIES SSQ 6 SPECIFICATIONSStraight Square Steel Lighting Pole: Surface Mounted
CatalogueNumber
Tube Size(inches)
MountingHeight(Feet)
Weight(Lbs)
Anchor Bolt Dia.(inches)
BCD(inches)
SSQ6-20 6 20 360 1 14 16
SSQ6-24 6 25 430 1 14 12
SSQ6-30 6 30 515 1 14 10
SSQ6-35 6 35 610 1 14 10
SSQ6-40 6 40 700 1 1/8 14 10
MaximumEPA @ 80
MPH
SERIES STS SPECIFICATIONSSquare Tapered Steel Pole
aluminous.com
NOTE: Drawings are Pictorial Only
** Heavy Duty
NOTES:
All poles are complete with tenon, hand hole cover and ground lug.
All base mounted poles are complete with galvanized steel anchor bolts(c/w 2 nuts, 2 washers) and base cover.
Poles are Polyester coated Standard Black or Dark Bronze. All other colours and galvanized subject to additional charges.
Material: Base Plate and AnchorBolts - 44 kpsi Min. Yield Shaft - 50 kpsi Min. Yield
Anchor Bolt Projection: 3 - 4 inchesConcrete Min. Yield: 3500 psiWelding Conforms to CSA W47.1 and W47.2
SERIES STS SPECIFICATIONSSquare Tapered Steel Pole
STRAIGHT TAPERED SHAFT
CatalogueNumber
Base MountedTop
Mtg. Height(Feet)
Wall Thk.(Inches)
BCD(Inches)
Anchor BoltDia. (Inches)
STS-20-531-AB 5.3 - 3.1 20 0.125 11 3/4 X 30
STS-25-634-AB 6.1 - 3.4 25 0.125 13 1 X 30
STS-30-663.3-AB 6.6 - 3.3 30 0.125 12.5 1 X 36
STS-30-754-AB** 7.2 - 3.9 30 0.188 14 1 X 36
STS-35-735-AB 7.2 - 3.4 35 0.125 14 1 X 36
STS-35-735-AB** 7.2 - 3.4 35 0.188 14 1 X 36
STS-40-753-AB 7.5 - 3.1 40 0.125 15.5 1 X 36
STS-40-753-AB** 7.2 - 3.1 40 0.188 15.5 1 X 36
STS-45-853-AB 7.5 - 3.6 45 0.125 15.5 1 X 36
STS-45-853-AB** 8.5 - 3.6 45 0.188 15.5 1 1/4 X 42
ALUMINUM POLES
aluminous.com
SERIES SRAL 3 SPECIFICATIONSStraight Round Aluminum Lighting Pole: Surface Mounted
aluminous.com
NOTE: Drawings are Pictorial Only
NOTES:
All poles are complete with tenon, hand hole cover and ground lug.
All base mounted poles are complete with galvanized steel anchor bolts(c/w 2 nuts, 2 washers) and base cover.
Polyester coated Standard Black, Dark Bronze or White. All other coloursand galvanized subject to additional charges.
Material: Base Plate and AnchorBolts - 44 kpsi Min. Yield Shaft - 33 kpsi Min. Yield
Anchor Bolt Projection: 3 - 4 inchesConcrete Min. Yield: 3500 psiWelding Conforms to CSA W47.1 and W47.2
SERIES SRAL 3 SPECIFICATIONSStraight Round Aluminum Lighting Pole: Surface Mounted
3 DIAMETER
CatalogueNumber
Tube Size(inches)
MountingHeight(Feet)
Weight(Lbs)
Anchor Bolt Dia.(inches)
BCD(inches)
MaximumEPA @ 80
MPH
SRAL3-08 3 8 41 5/8 8 9
SRAL3-10 3 10 56 5/8 8 7
SRAL3-12 3 12 69 5/8 8 5
SRAL3-15 3 15 82 5/8 8 4
SERIES SRAL 4 SPECIFICATIONSStraight Round Aluminum Lighting Pole: Surface Mounted
aluminous.com
NOTE: Drawings are Pictorial Only
NOTES:
All poles are complete with tenon or drilled one side (please specify with detail).
All poles are complete with top cap, hand hole cover and galvanized steel anchor bolts(c/w 2 nuts, 2 washers) and base cover.
Poles are Polyester coated Standard Black or Dark Bronze. All other colours and galvanized subject to additional charges.
Material: Base Plate and AnchorBolts - 44 kpsi Min. Yield Shaft - 33 kpsi Min. Yield
Anchor Bolt Projection: 3 - 4 inchesConcrete Min. Yield: 3500 psiWelding Conforms to CSA W47.1 and W47.2
SERIES SRAL 4 SPECIFICATIONSStraight Round Aluminum Lighting Pole: Surface Mounted
4 DIAMETER
CatalogueNumber
Tube Size(inches)
MountingHeight(Feet)
Weight(Lbs)
Anchor Bolt Dia.(inches)
BCD(inches)
MaximumEPA @ 80
MPH
SRAL4-08 4 8 80 3/4 8 12
SRAL4-10 4 10 84 3/4 8 10
SRAL4-12 4 12 95 3/4 8 8
SRAL4-15 4 15 110 3/4 8 6.5
SRAL4-18 4 18 130 3/4 8 5
SRAL4-20 4 20 142 3/4 8 4
SERIES SRAL 5 SPECIFICATIONSStraight Round Aluminum Lighting Pole: Surface Mounted
aluminous.com
NOTE: Drawings are Pictorial Only
NOTES:
All poles are complete with tenon, hand hole cover and ground lug.
All base mounted poles are complete with galvanized steel anchor bolts(c/w 2 nuts, 2 washers) and base cover.
Polyester coated Standard Black or Dark Bronze or White. All other colours and galvanized subject to additional charges.
Material: Base Plate and AnchorBolts - 44 kpsi Min. Yield Shaft - 33 kpsi Min. Yield
Anchor Bolt Projection: 3 - 4 inchesConcrete Min. Yield: 3500 psiWelding Conforms to CSA W47.1 and W47.2
SERIES SRAL 5 SPECIFICATIONSStraight Round Aluminum Lighting Pole: Surface Mounted
5 DIAMETER
CatalogueNumber
Tube Size(inches)
MountingHeight(Feet)
Weight(Lbs)
Anchor Bolt Dia.(inches)
BCD(inches)
MaximumEPA @ 80
MPH
SRAL5-15 5 15 105 Approx. 3/4 10 8
SRAL5-20 5 20 128 Approx. 3/4 10 6.5
SRAL5-25 5 25 152 Approx. 3/4 10 5.2
SERIES SRAL 6 SPECIFICATIONSStraight Round Aluminum Lighting Pole: Surface Mounted
aluminous.com
NOTE: Drawings are Pictorial Only
NOTES:
All poles are complete with tenon, hand hole cover and ground lug.
All base mounted poles are complete with galvanized steel anchor bolts(c/w 2 nuts, 2 washers) and base cover.
Polyester coated Standard Black or Dark Bronze or White. All other colours and galvanized subject to additional charges.
Material: Base Plate and AnchorBolts - 44 kpsi Min. Yield Shaft - 33 kpsi Min. Yield
Anchor Bolt Projection: 3 - 4 inchesConcrete Min. Yield: 3500 psiWelding Conforms to CSA W47.1 and W47.2
SERIES SRAL 6 SPECIFICATIONSStraight Round Aluminum Lighting Pole: Surface Mounted
6 DIAMETER
CatalogueNumber
Tube Size(inches)
MountingHeight(Feet)
Weight(Lbs)
Anchor Bolt Dia.(inches)
BCD(inches)
MaximumEPA @ 80
MPH
SRAL6-20 6 20 200 Approx. 1 14 10
SRAL6-25 6 25 220 Approx. 1 14 6
SRAL6-30 6 30 255 Approx. 1 1/8 14 4
SERIES RATP SPECIFICATIONSRound Aluminum Tapered Poles
aluminous.com
NOTE: Drawings are Pictorial Only
MAX.
Hei
ght
40
Ask
fac
tory
for
Det
ails
ProductNumber
Height(Feet)
Taper(Inches)
Anchor Bolts(Lbs)
DB(Feet)
RATP-10-AB 10 5-3.5 3/4 x 24 3.5
RATP-12-AB 12 5-3.5 3/4 x 24 3.5
RATP-15 15 5-3.5 3/4 x 24 3.5
RATP-18 18 6-3.5 3/4 x 24 40
RATP-20 20 6-3.5 3/4 x 24 40
BSInches
BCInches
BWInches
HTInches
5 5/16 7 1/2 9 2
5 5/16 7 1/2 9 2
5 5/16 7 1/2 9 2
6 8 1/2 10 2
6 8 1/2 10 2
ANCHOR BASE DETAIL
NOTES:
OBTAIN BASE TEMPLATE DRAWING BEFORE INSTALLATION OF ANCHOR BOLTS
FOR DIRECT BURIAL, SUBSTITUTE DB FOR AB IN PRODUCT NUMBER
SERIES SSAL 4 SPECIFICATIONSStraight Square Aluminum Lighting Pole: Surface Mounted
aluminous.com
NOTE: Drawings are Pictorial Only
NOTES:
All poles are complete with tenon, hand hole cover and ground lug.
All base mounted poles are complete with galvanized steel anchor bolts(c/w 2 nuts, 2 washers) and base cover.
Polyester coated Standard Black, Dark Bronze or White. All other colours and galvanized subject to additional charges.
Material: Base Plate and AnchorBolts - 44 kpsi Min. Yield Shaft - 33 kpsi Min. Yield
Anchor Bolt Projection: 3 - 4 inchesConcrete Min. Yield: 3500 psiWelding Conforms to CSA W47.1 and W47.2
SERIES SSAL 4 SPECIFICATIONSStraight Square Aluminum Lighting Pole: Surface Mounted
CatalogueNumber
Tube Size(inches)
MountingHeight(Feet)
Weight(Lbs)
Anchor Bolt Dia.(inches)
BCD(inches)
MaximumEPA @ 80
MPH
SSAL4-8 4 8 80 3/4 8 20
SSAL4-10 4 10 84 3/4 8 14
SSAL4-12 4 12 95 3/4 8 12
SSAL4-15 4 15 110 3/4 8 8
SSAL4-18 4 18 130 3/4 8 7
SSAL4-20 4 20 143 3/4 8 7
SERIES SSAL 5 SPECIFICATIONSStraight Square Aluminum Lighting Pole: Surface Mounted
aluminous.com
NOTE: Drawings are Pictorial Only
NOTES:
All poles are complete with tenon or drilled one side (please specify with detail).
All poles are complete with top cap, hand hole cover and galvanized steel anchor bolts(c/w 2 nuts, 2 washers) and base cover.
Poles are Polyester coated Standard Black or Dark Bronze. All other colours and galvanized subject to additional charges.
Material: Base Plate and AnchorBolts - 44 kpsi Min. Yield Shaft - 33 kpsi Min. Yield
Anchor Bolt Projection: 3 - 4 inchesConcrete Min. Yield: 3500 psiWelding Conforms to CSA W47.1 and W47.2
SERIES SSAL 5 SPECIFICATIONSStraight Square Aluminum Lighting Pole: Surface Mounted
CatalogueNumber
Tube Size(inches)
MountingHeight(Feet)
Weight(Lbs)
Anchor Bolt Dia.(inches)
BCD(inches)
MaximumEPA @ 80
MPH
SSAL5-12 5 12 95 1 10 12
SSAL5-15 5 15 105 1 10 10
SSAL5-20 5 20 220 1 11 8.5
SSAL5-25 5 25 290 1 12 7
SSAL5-30 5 30 423 1 12 6
SERIES SSAL 6 SPECIFICATIONSStraight Square Aluminum Lighting Pole: Surface Mounted
aluminous.com
NOTE: Drawings are Pictorial Only
NOTES:
All poles are complete with tenon or drilled one side (please specify with detail).
All poles are complete with top cap, hand hole cover and galvanized steel anchor bolts(c/w 2 nuts, 2 washers) and base cover.
Poles are Polyester coated Standard Black or Dark Bronze. All other colours and galvanized subject to additional charges.
Material: Base Plate and AnchorBolts - 44 kpsi Min. Yield Shaft - 33 kpsi Min. Yield
Anchor Bolt Projection: 3 - 4 inchesConcrete Min. Yield: 3500 psiWelding Conforms to CSA W47.1 and W47.2
SERIES SSAL 6 SPECIFICATIONSStraight Square Aluminum Lighting Pole: Surface Mounted
CatalogueNumber
Tube Size(inches)
MountingHeight(Feet)
Weight(Lbs)
Anchor Bolt Dia.(inches)
BCD(inches)
MaximumEPA @ 80
MPH
SSAL6-20 6 20 360 1 13 12
SSAL6-25 6 25 430 1 13 10
SSAL6-30 6 30 515 1 13 8
SSAL6-35 6 35 610 1 13 5
SSAL6-40 6 40 700 1 13 4
DECORATIVE BASE POLES
aluminous.com
SERIES PORT MARIA SPECIFICATIONSStraight 3 & 4 Round Aluminum Lighting Pole: Straight or Fluted
aluminous.com
NOTE: Drawings are Pictorial Only
SERIES PORT MARIA SPECIFICATIONSStraight 3 & 4 Round Aluminum Lighting Pole: Straight or Fluted
SHAFT 4 Dia. Straight or Fluted Shaft from 6063 Alum. Alloy Tubing heat treated to produce a T6 temper and welded to base, include a Tenon Adapter for a PostTop Fixture.
DECORATIVEBASE From a Cast Aluminum construction of A386 Aluminum Alloy heat treated to a
T6 strength formed to T6. The pattern with complete detail.
LUMINAIRE Manufactured by others. Please ask for details.
ANCHORAGE Hot Rolled Steel Bar min. yield strength 50,000 psi.
FINISH Electrostatic polyester powder coated. Standard black or dark Bronze. All othercolours available upon request.
Welding Conforms to CSA W47.1 and W47.2
STRAIGHT SHAFT
CatalogueNumber
Tube size(Inches
MountingHeight (Feet)
Weight(Lbs.)
Anchor BoltDia. (Inches)
BCD(Inches)
PTMDB-4S-8 4 8 90 3/4 10
PTMDB-4S-10 4 10 94 3/4 10
PTMDB-4S-12 4 12 105 3/4 10
PTMDB-4S-15 4 15 120 3/4 10
FLUTED SHAFT
CatalogueNumber
Tube size(Inches
MountingHeight (Feet)
Weight(Lbs.)
Anchor BoltDia. (Inches)
BCD(Inches)
PTMDB-4FL-8 4 8 95 3/4 10
PTMDB-4FL-10 4 10 99 3/4 10
PTMDB-4FL-12 4 12 110 3/4 10
PTMDB-4FL-15 4 15 125 3/4 10
SERIES MONTEGO SPECIFICATIONSStraight 3 & 4 Round Aluminum Lighting Pole: Straight or Fluted
aluminous.com
NOTE: Drawings are Pictorial Only
SHAFT Can be Steel or Aluminum. Steel is produced from high grade structural tube.Aluminum 4 or 5 Dia. extruded from 6063 Aluminum Alloy heat treated to a T6 temper.
BASE COVER Chemical treated preparation, polyester powder coat finish available in StandardColour.
FINISH Electrostatic powder coated. Available in Standard or custom colour finish.
LUMINAIRE Manufactured by others. Please ask for details.
MATERIAL Base Plate and Anchor, Bolts - 44 kpsi Min. Yield, Shaft - 50 kpsi Min. Yield.
ANCHOR BOLTPROJECTION 3-4 inches, Concrete Min. Yield 3500 psi,
Welding Conforms to CSA W47.1 and W47.2
SERIES MONTEGO SPECIFICATIONSStraight 3 & 4 Round Aluminum Lighting Pole: Straight or Fluted
STRAIGHT SHAFT
CatalogueNumber
NominalHeight
Shaft(Dia.)
Size(Inches)
BCD(Inches)
Anchor BoltDia. (Inches)
MO - S - 8 8 3 12 10 3/4
MO - S - 10 10 3 12 10 3/4
MO - S - 12 12 3 12 10 3/4
MO - S - 15 15 4 12 10 3/4
MO - S - 18 18 4 12 10 3/4
MO - S - 20 20 4 12 10 3/4
FLUTED SHAFT
CatalogueNumber
NominalHeight
Shaft(Dia.)
Size(Inches)
BCD(Inches)
Anchor BoltDia. (Inches)
MO - FL - 8 8 3 12 10 3/4
MO - FL - 10 10 3 12 10 3/4
MO - FL - 12 12 3 12 10 3/4
MO - FL - 12 12 4 12 10 3/4
MO - FL - 15 15 4 12 10 3/4
MO - FL - 18 28 4 12 10 3/4
MO - FL - 20 20 4 12 10 3/4
SERIES PORT ROYAL SPECIFICATIONSStraight 3 & 4 Round Aluminum Lighting Pole: Straight or Fluted
aluminous.com
NOTE: Drawings are Pictorial Only
SERIES PORT ROYAL SPECIFICATIONSStraight 3 & 4 Round Aluminum Lighting Pole: Straight or Fluted
LUMINAIRE Manufactured by others. Please ask for details.
FINISH Chemical treated preparation, Polyester powder coat finish available in standard colour
MATERIAL Bolts - 44 kpsi Min. Yield
ANCHOR BOLTPROJECTION 3-4 inches, Concrete Min. Yield 3500 psi,
Welding Conforms to CSA W47.1 and W47.2
STRAIGHT SHAFT
CatalogueNumber
NominalHeight
WeightApprox. (Lbs.)
Base Size(Inches)
BCD(Inches)
Anchor BoltDia. (Inches)
PR - S - 8 8 68 12 1/4 10 3/4
PR - S - 10 10 83 12 1/4 10 3/4
PR - S - 12 12 95 12 1/4 10 3/4
PR - S - 14 14 105 12 1/4 10 3/4
FLUTED SHAFT
CatalogueNumber
NominalHeight
WeightApprox. (Lbs.)
Base Size(Inches)
BCD(Inches)
Anchor BoltDia. (Inches)
PR - FL - 8 8 71 12 1/4 10 3/4
PR - FL - 10 10 85 12 1/4 10 3/4
PR - FL - 12 12 98 12 1/4 10 3/4
PR - FL - 14 14 110 12 1/4 10 3/4
SERIES OLD HARBOUR SPECIFICATIONSStraight 3 & 4 Round Aluminum Lighting Pole: Straight or Fluted
aluminous.com
NOTE: Drawings are Pictorial Only
SERIES OLD HARBOUR SPECIFICATIONSStraight 3 & 4 Round Aluminum Lighting Pole: Straight or Fluted
LUMINAIRE Manufactured by others. Please ask for details.
FINISH Chemical treated preparation, Polyester powder coat finish available in standard colour
MATERIAL Bolts - 44 kpsi Min. Yield
ANCHOR BOLTPROJECTION 3-4 inches, Concrete Min. Yield 3500 psi,
Welding Conforms to CSA W47.1 and W47.2
STRAIGHT SHAFT
CatalogueNumber
NominalHeight
WeightApprox. (Lbs.)
Base Size(Inches)
BCD(Inches)
Anchor BoltDia. (Inches)
OH - S - 8 8 68 12 1/4 8 3/4
OH - S - 10 10 83 12 1/4 8 3/4
OH - S - 12 12 95 12 1/4 8 3/4
OH - S - 14 14 105 12 1/4 8 3/4
FLUTED SHAFT
CatalogueNumber
NominalHeight
WeightApprox. (Lbs.)
Base Size(Inches)
BCD(Inches)
Anchor BoltDia. (Inches)
OH - FL - 8 8 71 12 1/4 8 3/4
OH - FL - 10 10 85 12 1/4 8 3/4
OH - FL - 12 12 98 12 1/4 8 3/4
OH - FL - 14 14 110 12 1/4 8 3/4
SERIES PORT ANTONIO SPECIFICATIONSStraight 3 & 4 Round Aluminum Lighting Pole: Straight or Fluted
aluminous.com
NOTE: Drawings are Pictorial Only
SERIES PORT ANTONIO SPECIFICATIONSStraight 3 & 4 Round Aluminum Lighting Pole: Straight or Fluted
LUMINAIRE Manufactured by others. Please ask for details.
MATERIAL Bolts - 44 kpsi Min. Yield.
ANCHOR BOLTPROJECTION 3-4 inches, Concrete Min. Yield 3500 psi,
Welding Conforms to CSA W47.1 and W47.2
STRAIGHT SHAFT
CatalogueNumber
NominalHeight
WeightApprox. (Lbs.)
Base Size(Inches)
BCD(Inches)
Anchor BoltDia. (Inches)
PA - S - 8 8 78 12 10 3/4
PA - S - 10 10 92 12 10 3/4
PA - S - 12 12 105 12 10 3/4
PA - S - 14 14 115 12 10 3/4
FLUTED SHAFT
CatalogueNumber
NominalHeight
WeightApprox. (Lbs.)
Base Size(Inches)
BCD(Inches)
Anchor BoltDia. (Inches)
PA - FL - 8 8 81 12 10 3/4
PA - FL - 10 10 95 12 10 3/4
PA - FL - 12 12 107 12 10 3/4
PA - FL - 14 14 120 12 10 3/4
SERIES SANTE FE SPECIFICATIONSStraight 3 & 4 Round Aluminum Lighting Pole: Straight or Fluted
aluminous.com
NOTE: Drawings are Pictorial Only
SERIES SANTE FE SPECIFICATIONSStraight 3 & 4 Round Aluminum Lighting Pole: Straight or Fluted
LUMINAIRE Manufactured by others. Please ask for details.
FINISH Chemical treated preparation, Polyester powder coat finish available in standard colour
MATERIAL Bolts - 44 kpsi Min. Yield
ANCHOR BOLTPROJECTION 3-4 inches, Concrete Min. Yield 3500 psi,
Welding Conforms to CSA W47.1 and W47.2
STRAIGHT SHAFT
CatalogueNumber
NominalHeight
WeightApprox. (Lbs.)
Base Size(Inches)
BCD(Inches)
Anchor BoltDia. (Inches)
SF - S - 8 8 73 18 1/2 10 3/4
SF - S - 10 10 88 18 1/2 10 3/4
SF - S - 12 12 100 18 1/2 10 3/4
SF - S - 14 14 110 18 1/2 10 3/4
FLUTED SHAFT
CatalogueNumber
NominalHeight
WeightApprox. (Lbs.)
Base Size(Inches)
BCD(Inches)
Anchor BoltDia. (Inches)
SF - FL - 8 8 76 18 1/2 10 3/4
SF - FL - 10 10 90 18 1/2 10 3/4
SF - FL - 12 12 102 18 1/2 10 3/4
SF - FL - 14 14 115 18 1/2 10 3/4
SERIES MANDEVILLE SPECIFICATIONSStraight 3 & 4 Round Aluminum Lighting Pole: Straight or Fluted
aluminous.com
NOTE: Drawings are Pictorial Only
SERIES MANDEVILLE SPECIFICATIONSStraight 3 & 4 Round Aluminum Lighting Pole: Straight or Fluted
LUMINAIRE Manufactured by others. Please ask for details.
FINISH Chemical treated preparation, Polyester powder coat finish available in standard colour
MATERIAL Bolts - 44 kpsi Min. Yield
ANCHOR BOLTPROJECTION 3-4 inches, Concrete Min. Yield 3500 psi,
Welding Conforms to CSA W47.1 and W47.2
STRAIGHT SHAFT
CatalogueNumber
NominalHeight
WeightApprox. (Lbs.)
Base Size(Inches)
BCD(Inches)
Anchor BoltDia. (Inches)
MV - S - 8 8 70 11 1/2 10 3/4
MV - S - 10 10 85 11 1/2 10 3/4
MV - S - 12 12 98 11 1/2 10 3/4
MV - S - 14 14 108 11 1/2 10 3/4
FLUTED SHAFT
CatalogueNumber
NominalHeight
WeightApprox. (Lbs.)
Base Size(Inches)
BCD(Inches)
Anchor BoltDia. (Inches)
MV - FL - 8 8 74 11 1/2 10 3/4
MV - FL - 10 10 87 11 1/2 10 3/4
MV - FL - 12 12 100 11 1/2 10 3/4
MV - FL - 14 14 111 11 1/2 10 3/4
SERIES 2000Custom Design Poles and Arms
aluminous.com
SERIES 2000 SPECIFICATIONSBASKET-UPLITE
aluminous.com
NOTE: Drawings are Pictorial Only
SERIES 2000 SPECIFICATIONSBASKET-UPLITE
SHAFT Made from one piece 5 Rd. high tensile carbon steel, welded to a 6-5/8 Rd.high tensile carbon steel base. A 4 x 6 opening c/w cover and ground lug.
BASE COVER Two-piece Rd. Fabricated steel cover.
FINISH Electrostatic powder coated. Available in Standard or custom colour finish.
LUMINAIRE Manufactured by others. Please ask for details.
MATERIAL Base Plate and Anchor, Bolts - 44 kpsi Min. Yield, Shaft - 50 kpsi Min. Yield.
ANCHOR BOLTPROJECTION 3-4 inches, Concrete Min. Yield 3500 psi, Welding Conforms to CSA W47.1
and W47.2
BASKET-UPLIGHT SPECIFICATIONS
CatalogueNumber
NominalHeight
TopSection
BottomSection
Weight(Lbs.)
Anchor Bolt
Dia. (In.)
Base Size(Inches)
BCD(Inches)
BUS-10 10 5 - .188 6 5/8 - .188 210 15 10 1
BUS-12 12 5 - .188 6 5/8 - .188 260 15 10 1
BUS-16 15 5 - .188 6 5/8 - .188 290 15 10 1
BUS-18 17 5 - .188 6 5/8 - .188 310 15 10 1
SERIES 2000 SPECIFICATIONSBASKET-DOWNLITE
aluminous.com
NOTE: Drawings are Pictorial Only
SERIES 2000 SPECIFICATIONSBASKET-DOWNLITE
SHAFT One piece mechanical tubing 4 Rd. high tensile carbon steel, welded to amachine decorative joint assay., then welded to 6-5/8 Rd. high tensile steelbase.
BASE COVER Constructed from two-piece cast aluminum mechanically fastened to Base.
FINISH Chemical treated preparation, polyester powered coat finish available in standard colours.
LUMINAIRE Manufactured by others. Please ask for details.
MATERIAL Base Plate and Anchor, Bolts - 44 kpsi Min. Yield, Shaft - 50 kpsi Min. Yield.
ANCHOR BOLTPROJECTION 3-4 inches, Concrete Min. Yield 3500 psi, Welding Conforms to CSA W47.1
and W47.2
BASKET-DOWNLITE SPECIFICATIONS
BD-8 8 4 - .125 6 5/8 - .188 120 12 10 3/4
BD-10 10 4 - .125 6 5/8 - .188 130 12 10 3/4
BD-12 12 4 - .125 6 5/8 - .188 140 12 10 3/4
BD-15 15 4 - .125 6 5/8 - .188 155 12 10 3/4
BD-18 18 4 - .125 6 5/8 - .188 170 12 10 3/4
CatalogueNumber
NominalHeight
TopSection
BottomSection
Weight(Lbs.)
Anchor Bolt
Dia. (In.)
Base Size(Inches)
BCD(Inches)
SERIES 2000 SPECIFICATIONSOceanic
aluminous.com
NOTE: Drawings are Pictorial Only
SERIES 2000 SPECIFICATIONSOceanic
SHAFT 4 or 5 Dia. extruded from 6063 Alum. Alloy heat treated to produce a T6Temper. Joint is cast Alum. construction of 356 Alum. Allow heat treated to produce a T6 temper. Bottom tube is of an extruded construction 6063 Alum. Alloy heat treated to T6 temper.
BASE COVER Two-piece heavy wall Alum. construction to conceal anchor base.
FINISH Electrostatic powder coated. Available in Standard or custom colour finish.
LUMINAIRE Manufactured by others. Please ask for details.
MATERIAL Base Plate and Anchor, Bolts - 44 kpsi Min. Yield, Shaft - 33 kpsi Min. Yield.
ANCHOR BOLTPROJECTION 3-4 inches, Concrete Min. Yield 3500 psi, Welding Conforms to CSA W47.1
and W47.2
OCEANIC SPECIFICATIONS
CatalogueNumber
NominalHeight
TopSection
BottomSection
Anchor Bolt
Dia. (In.)
Base Size(Inches)
BCD(Inches)
OC - 8 8 4 - .125 6 5/8 14 10 3/4
OC -10 10 4 - .125 6 5/8 14 10 3/4
OC - 12 12 5 - .188 6 5/8 14 10 3/4
OC - 15 15 5 - .188 6 5/8 14 10 3/4
OC - 18 18 5 - .188 6 5/8 14 10 3/4
OC - 20 20 5 - .188 6 5/8 14 10 3/4
SERIES 2000 SPECIFICATIONSLakeside
aluminous.com
NOTE: Drawings are Pictorial Only
SERIES 2000 SPECIFICATIONSLakeside
LAKESIDE SPECIFICATIONS
CatalogueNumber
NominalHeight
TopSection
Base Size(Inches)
BCD(Inches)
Anchor BoltDia. (Inches)
LS - 8 8 5 - .188 10 8 3/4
LS - 10 10 5 - .188 10 8 3/4
LS - 12 12 5 - .188 10 8 3/4
LS - 15 15 5 - .188 10 8 3/4
LS - 18 18 5 - .188 10 8 3/4
SHAFT 4 or 5 Dia. extruded from 6063 Alum. Alloy heat treated to produce a T6 Temper. Include Hand Hole.
ARM Extruded aluminum construction
BASE COVER Two-piece Aluminum construction to conceal anchor base.
FINISH Electrostatic powder coated. Available in Standard or Custom Colour finish.
LUMINAIRE Manufactured by others. Please ask for details.
MATERIAL Base Plate and Anchor, Bolts - 44 kpsi Min. Yield, Shaft - 50 kpsi Min. Yield.
ANCHOR BOLTPROJECTION 3-4 inches, Concrete Min. Yield 3500 psi, Welding Conforms to CSA W47.1
and W47.2
SERIES 2000 SPECIFICATIONSSanta Domingo
aluminous.com
NOTE: Drawings are Pictorial Only
SERIES 2000 SPECIFICATIONSSanta Domingo
SANTA DOMINGO SPECIFICATIONS
CatalogueNumber
NominalHeight
Top Section(O.D.)
BottomSection
Base Size(Inches)
BCD(Inches)
Anchor BoltDia. (Inches)
SD - 8 8 4 6 5/8 15 12 3/4
SD - 10 10 4 6 5/8 15 12 3/4
SD - 12 12 4 6 5/8 15 12 3/4
SD - 15 15 4 6 5/8 15 12 3/4
SD - 18 18 5 6 5/8 15 12 3/4
SD - 20 20 5 6 5/8 15 12 1
SD - 25 25 5 6 5/8 15 12 1
SD - 30 30 5 6 5/8 15 12 1
SHAFT 4 or 5 Dia. extruded from 6063 Alum. Alloy heat treated to produce a T6 Temper. Bottom base is 6 5/8 extruded 6063 Alum. Alloy heat treated to T6 temper.
BASE COVER Two-piece heavy wall Aluminum construction to conceal anchor base.
FINISH Electrostatic powder coated. Available in Standard or Custom Colour finish.
LUMINAIRE Manufactured by others. Please ask for details.
MATERIAL Base Plate and Anchor, Bolts - 44 kpsi Min. Yield, Shaft - 33 kpsi Min. Yield.
ANCHOR BOLTPROJECTION 3-4 inches, Concrete Min. Yield 3500 psi, Welding Conforms to CSA W47.1
and W47.2
SERIES 2000 SPECIFICATIONSTapered Fluted Octagonal Pole
aluminous.com
NOTE: Drawings are Pictorial Only
SERIES 2000 SPECIFICATIONSTapered Fluted Octagonal Pole
TAPERED FLUTED OCTAGONAL SPECIFICATIONS
CatalogueNumber
NominalHeight
WeightApprox. (Lbs.)
BCD(Inches)
Anchor BoltDia. (Inches)
TFOP - 15 15 100 12 3/4
TFOP - 18 18 118 12 3/4
TFOP - 20 20 130 12 3/4
TFOP - 25 25 160 12 1
TFOP - 30 30 190 12 1
FINISH Electrostatic powder coated. Available in Standard or Custom Colour finish.
LUMINAIRE Manufactured by others. Please ask for details.
MATERIAL Bolts - 44 kpsi Min. Yield.
ANCHOR BOLTPROJECTION 3-4 inches, Concrete Min. Yield 3500 psi, Welding Conforms to CSA W47.1
and W47.2
SERIES 2000 SPECIFICATIONSStraight Step Steel Pole - SSSP
aluminous.com
NOTE: Drawings are Pictorial Only
SERIES 2000 SPECIFICATIONSStraight Step Steel Pole - SSSP
SHAFT One piece mechanical tubing high tensile carbon steel, welded to a machine decorative joint assay., then welded to bottom steel base.
BASE COVER Constructed from two-piece cast aluminum mechanically fastened to base.
FINISH Chemical treated preparation, polyester powered coat finish available in standard colours.
LUMINAIRE Manufactured by others. Please ask for details.
MATERIAL Base Plate and Anchor, Bolts - 44 kpsi Min. Yield, Shaft - 50 kpsi Min. Yield.
ANCHOR BOLTPROJECTION 3-4 inches, Concrete Min. Yield 3500 psi, Welding Conforms to CSA W47.1 and
W47.2
SSSP SPECIFICATIONS
SSSP6-8 8 4 - .188 6 5/8 - .188 95 12 10 3/4
SSSP6-10 10 4 - .188 6 5/8 - .188 110 12 10 3/4
SSSP6-12 12 4 - .188 6 5/8 - .188 130 12 10 3/4
SSSP6-15 15 4 - .188 6 5/8 - .188 150 12 10 3/4
SSSP6-18 18 4 - .188 6 5/8 - .188 170 12 10 3/4
SSSP6-20 20 5 9/16 - .250 8 5/8 - .188 380 16 14 1
SSSP6-25 25 5 9/16 - .250 8 5/8 - .188 485 16 14 1
SSSP6-30 30 5 9/16 - .250 8 5/8 - .188 505 16 14 1
CatalogueNumber
NominalHeight
TopSection
BottomSection
Weight(Lbs.)
Anchor Bolt
Dia. (In.)
Base Size(Inches)
BCD(Inches)
CUSTOM POLES AND FIXTURES
aluminous.com
CUSTOM POLES AND FIXTURESPole With Single Fixture
aluminous.com
NOTE: Drawings are Pictorial Only
If required, Transformer may be mounted in base.
Aluminous will custom designpoles and fixtures to meet
your requirements.
CUSTOM POLES AND FIXTURESPole With Dual Fixtures and Banner Arms
aluminous.com
NOTE: Drawings are Pictorial Only
If required, Transformer may be mounted in base.
Aluminous will custom designpoles and fixtures to meet
your requirements.
CUSTOM POLES AND FIXTURESPole With Fixture, Banner Arms and Spotlight
aluminous.com
NOTE: Drawings are Pictorial Only
If required, Transformer may be mounted in base.
Aluminous will custom designpoles and fixtures to meet
your requirements.
CUSTOM POLES AND FIXTURESPole With Single Spotlight
aluminous.com
NOTE: Drawings are Pictorial Only
If required, Transformer may be mounted in base.
Aluminous will custom designpoles and fixtures to meet
your requirements.
CUSTOM POLES AND FIXTURESPole with Dual Spotlight
aluminous.com
NOTE: Drawings are Pictorial Only
If required, Transformer may be mounted in base.
Aluminous will custom designpoles and fixtures to meet
your requirements.
aluminous.com
NOTE: Drawings are Pictorial Only
CUSTOM POLES AND FIXTURESPole with Banner Arms and Spotlight
Aluminous will custom designpoles and fixtures to meet
your requirements.
CUSTOM POLES AND FIXTURESFixture for Mounting Without Pole
aluminous.com
NOTE: Drawings are Pictorial Only
Customized wall brackets are available.
Aluminous will custom designpoles and fixtures to meet
your requirements.
ROADWAY
aluminous.com
DAVIT (D) POLE SPECIFICATIONSAluminum Lighting Poles Single and Twin Arm
aluminous.com
NOTE: Drawings are Pictorial Only
DAVIT (D) POLE SPECIFICATIONSAluminum Lighting Poles Single and Twin Arm
NOTES: Pole to support luminaire not exceeding 3 sq. ft. x 80 lbs.*for direct burial pole, substitute AB for DB in catalog number.
CatalogueNumber*
MountingHeight
No.of
Arms
Shaft Size Bracket SizeAnchor Base Detail DirectBurial
AD2541-AB 1 17.5 7 - 5 .156 4 5 - 2.375 .188 7.0625 10.5 11 1 x 30 2.5 4 - 6
AD2542-AB 2 17.5 7 - 5 .156 4 5 - 2.375 .188 7.0625 10.5 11 1 x 30 2.5 4 - 6
AD2561-AB 1 17.5 7 - 5 .156 6 5 - 2.375 .188 7.0625 10.5 11 1 x 30 2.5 4 - 6
AD2562-AB 2 17.5 7 - 5 .156 6 5 - 2.375 .188 7.0625 10.5 11 1 x 30 2.5 4 - 6
AD2581-AB 1 17.5 7 - 5 .156 8 5 - 2.375 .188 7.0625 10.5 11 1 x 30 2.5 4 - 6
AD2582-AB 2 17.5 7 - 5 .188 8 5 - 2.375 .188 7.0625 10.5 11 1 x 30 2.5 4 - 6
AD3041-AB 1 22.5 8 - 5 .156 4 5 - 2.375 .188 8.125 11.5 12 1 x 30 2.75 5 - 0
AD3042-AB 2 22.5 8 - 5 .156 4 5 - 2.375 .188 8.125 11.5 12 1 x 30 2.75 5 - 0
AD3061-AB 1 22.5 8 - 5 .156 6 5 - 2.375 .188 8.125 11.5 12 1 x 30 2.75 5 - 0
AD3062-AB 2 22.5 8 - 5 .156 6 5 - 2.375 .188 8.125 11.5 12 1 x 30 2.75 5 - 0
AD3081-AB 1 22.5 8 - 5 .156 8 5 - 2.375 .188 8.125 11.5 12 1 x 30 2.75 5 - 0
AD3082-AB 2 22.5 8 - 5 .188 8 5 - 2.375 .188 8.125 11.5 12 1 x 30 2.75 5 - 0
AD3541-AB 1 27.5 8 - 5 .188 4 5 - 2.375 .188 8.125 11.5 12 1 x 30 2.75 5 - 6
AD3542-AB 2 27.5 8 - 5 .188 4 5 - 2.375 .188 8.125 11.5 12 1 x 30 2.75 5 - 6
AD3561-AB 1 27.5 8 - 5 .188 6 5 - 2.375 .188 8.125 11.5 12 1 x 30 2.75 5 - 6
AD3562-AB 2 27.5 8 - 5 .250 6 5 - 2.375 .188 8.125 11.5 12 1 x 30 2.75 5 - 6
AD3581-AB 1 27.5 8 - 5 .250 8 5 - 2.375 .188 8.125 11.5 12 1 x 30 2.75 5 - 6
AD3582-AB 2 27.5 8 - 5 .250 8 5 - 2.375 .188 8.125 11.5 12 1 x 30 2.75 5 - 6
AD4041-AB 1 30 10 - 6 .188 4 6 - 2.375 .188 10.625 15 14 1 x 30 3 6 - 0
AD4042-AB 2 30 10 - 6 .188 4 6 - 2.375 .188 10.625 15 14 1 x 30 3 6 - 0
AD4061-AB 1 30 10 - 6 .188 6 6 - 2.375 .188 10.625 15 14 1 x 30 3 6 - 0
AD4062-AB 2 30 10 - 6 .188 6 6 - 2.375 .188 10.625 15 14 1 x 30 3 6 - 0
AD4081-AB 1 30 10 - 6 .188 8 6 - 2.375 .188 10.625 15 14 1 x 30 3 6 - 0
AD4082-AB 2 30 10 - 6 .188 8 6 - 2.375 .188 10.625 15 14 1 x 30 3 6 - 0
25
30
35
40
Height Taper Wall
L
FEET FEET IN. IN. IN.FEET IN. IN. IN. IN. IN. IN. FEET
H C A BC S E DA/BOLTS
Length Taper Wall
TAPERED ELLIPTICAL ARM (E) POLESAluminum Lighting Poles Single and Twin Arm
aluminous.com
NOTE: Drawings are Pictorial Only
NOTES: Pole to support luminaire not exceeding 2.5 sq. ft. x 60 lbs. or 3 sq. ft. x 50 lbs.*for direct burial pole, substitute AB for DB in catalog number.
TAPERED ELLIPTICAL ARM (E) POLESAluminum Lighting Poles Single and Twin Arm
CatalogueNumber
MountingHeight
No.of
Arms
Shaft Size Bracket SizeAnchor Base Detail DirectBurial
AE2041-AB 1 18 7 - 4.5 .156 4-0 3 - 2.375 .125 7.4375 10.5 11 1 x 30 2.5 4 - 0
AE2042-AB 2 18 7 - 4.5 .156 4-0 3 - 2.375 .125 7.4375 10.5 11 1 x 30 2.5 4 - 0
AE2061-AB 1 18 7 - 4.5 .156 6-0 3.5 - 2.375 .125 7.4375 10.5 11 1 x 30 2.5 4 - 0
AE2062-AB 2 18 7 - 4.5 .156 6-0 3.5 - 2.375 .125 7.4375 10.5 11 1 x 30 2.5 4 - 0
AE2081-AB 1 18 7 - 4.5 .156 8-0 4 - 2.375 .125 7.4375 10.5 11 1 x 30 2.5 4 - 0
AE2082-AB 2 18 7 - 4.5 .156 8-0 4 - 2.375 .125 7.4375 10.5 11 1 x 30 2.5 4 - 0
AE2541-AB 1 22 7 - 4.5 .156 4-0 3 - 2.375 .125 7.4375 10.5 11 1 x 30 2.5 4 - 6
AE2542-AB 2 22 7 - 4.5 .156 4-0 3 - 2.375 .125 7.4375 10.5 11 1 x 30 2.5 4 - 6
AE2561-AB 1 22 7 - 4.5 .156 6-0 3.5 - 2.375 .125 7.4375 10.5 11 1 x 30 2.5 4 - 6
AE2562-AB 2 22 7 - 4.5 .156 6-0 3.5 - 2.375 .125 7.4375 10.5 11 1 x 30 2.5 4 - 6
AE2581-AB 1 22 7 - 4.5 .156 8-0 4 - 2.375 .125 7.4375 10.5 11 1 x 30 2.5 4 - 6
AE2582-AB 2 22 7 - 4.5 .188 8-0 4 - 2.375 .125 7.4375 10.5 11 1 x 30 2.5 4 - 6
AE3041-AB 1 27 8 - 4.5 .156 4-0 3 - 2.375 .125 8.125 11.5 12 1 x 30 2.75 5 - 0
AE3042-AB 1 27 8 - 4.5 .156 4-0 3 - 2.375 .125 8.125 11.5 12 1 x 30 2.75 5 - 0
AE3061-AB 1 27 8 - 4.5 .156 6-0 3.5 - 2.375 .125 8.125 11.5 12 1 x 30 2.75 5 - 0
AE3062-AB 2 27 8 - 4.5 .156 6-0 3.5 - 2.375 .125 8.125 11.5 12 1 x 30 2.75 5 - 0
AE3081-AB 1 27 8 - 4.5 .156 8-0 4 - 2.375 .125 8.125 11.5 12 1 x 30 2.75 5 - 0
AE3082-AB 2 27 8 - 4.5 .188 8-0 4 - 2.375 .125 8.125 11.5 12 1 x 30 2.75 5 - 0
AE3541-AB 1 32 8 - 4.5 .188 4-0 3 - 2.375 .125 8.125 11.5 12 1 x 30 2.75 5 - 6
AE3542-AB 2 32 8 - 4.5 .188 4-0 3 - 2.375 .125 8.125 11.5 12 1 x 30 2.75 5 - 6
AE3561-AB 1 32 8 - 4.5 .188 6-0 3.5 - 2.375 .125 8.125 11.5 12 1 x 30 2.75 5 - 6
AE3562-AB 2 32 8 - 4.5 .250 6-0 3.5 - 2.375 .125 8.125 11.5 12 1 x 30 2.75 5 - 6
AE3581-AB 1 32 8 - 4.5 .188 8-0 4 - 2.375 .125 8.125 11.5 12 1 x 30 2.75 5 - 6
AE3582-AB 2 32 8 - 4.5 .250 8-0 4 - 2.375 .125 8.125 11.5 12 1 x 30 2.75 5 - 6
AE4041-AB 1 37 10 - 5.5 .188 4-0 3 - 2.375 .125 10.625 15 14 1 x 30 3 6 - 0
AE4042-AB 2 37 10 - 5.5 .188 4-0 3 - 2.375 .125 10.625 15 14 1 x 30 3 6 - 0
AE4061-AB 1 37 10 - 5.5 .188 6-0 3.5 - 2.375 .125 10.625 15 14 1 x 30 3 6 - 0
AE4062-AB 2 37 10 - 5.5 .188 6-0 3.5 - 2.375 .125 10.625 15 14 1 x 30 3 6 - 0
AE4081-AB 1 37 10 - 5.5 .188 8-0 4 - 2.375 .125 10.625 15 14 1 x 30 3 6 - 0
AE4082-AB 2 37 10 - 5.5 .188 8-0 4 - 2.375 .125 10.625 15 14 1 x 30 3 6 - 0
20
25
30
35
40
Height Taper Wall
L
FEET FEET IN. IN. IN.FEET IN. IN. IN. IN. IN. IN. FEET
H C A BC S E DA/BOLTS
Length Taper Wall
T R U S S A R M P O L E SAluminum Lighting Poles Single and Twin Arm
aluminous.com
NOTE: Drawings are Pictorial Only
T R U S S A R M P O L E SAluminum Lighting Poles Single and Twin Arm
NOTES: Pole to support luminaire not exceeding 2.5 sq. ft. x 60 lbs. or 3 sq. ft. x 50 lbs.*for direct burial pole, substitute AB for DB in catalog number.
CatalogueNumber
MountingHeight
No.of
Arms
Shaft Size Bracket SizeAnchor Base Detail DirectBurial
AT2581-AB 1 22 8 - 5.5 .156 8-0 2 .154 8.125 11.5 12 1 x 30 2.75 4 - 6
AT2582-AB 2 22 8 - 5.5 .188 8-0 2 .154 8.125 11.5 12 1 x 30 2.75 4 - 6
AT25101-AB 1 22 8 - 5.5 .156 10-0 2 .218 8.125 11.5 12 1 x 30 2.75 4 - 6
AT25102-AB 2 22 8 - 5.5 .188 10-0 2 .218 8.125 11.5 12 1 x 30 2.75 4 - 6
AT25121-AB 1 22 8 - 5.5 .188 12-0 2.5 .203 8.125 11.5 12 1 x 30 2.75 4 - 6
AT25122-AB 2 22 8 - 5.5 .188 12-0 2.5 .203 8.125 11.5 12 1 x 30 2.75 4 - 6
AT25151-AB 1 22 8 - 5.5 .188 15-0 2.5 .203 8.125 11.5 12 1 x 30 2.75 4 - 6
AT25152-AB 2 22 8 - 5.5 .250 15-0 2.5 .203 8.125 11.5 12 1 x 30 2.75 4 - 6
AT3081-AB 1 27 8 - 5.5 .188 8-0 2 .154 8.125 11.5 12 1 x 30 2.75 5 - 0
AT3082-AB 2 27 8 - 5.5 .250 8-0 2 .154 8.125 11.5 12 1 x 30 2.75 5 - 0
AT30101-AB 1 27 8 - 5.5 .188 10-0 2 .218 8.125 11.5 12 1 x 30 2.75 5 - 0
AT30102-AB 2 27 8 - 5.5 .250 10-0 2 .218 8.125 11.5 12 1 x 30 2.75 5 - 0
AT30121-AB 1 27 8 - 5.5 .188 12-0 2.5 .203 8.125 11.5 12 1 x 30 2.75 5 - 0
AT30122-AB 2 27 8 - 5.5 .250 12-0 2.5 .203 8.125 11.5 12 1 x 30 2.75 5 - 0
AT30151-AB 1 27 8 - 5.5 .188 15-0 2.5 .203 8.125 11.5 12 1 X 30 2.75 5 - 0
AT30152-AB 2 27 8 - 5.5 .250 15-0 2.5 .203 8.125 11.5 12 1 X 30 2.75 5 - 0
AT3581-AB 1 32 10 - 5.5 .188 8-0 2 .154 10.625 15 14 1 x 30 3 5 - 6
AT3582-AB 1 32 10 - 5.5 .188 8-0 2 .154 10.625 15 14 1 x 30 3 5 - 6
AT35101-AB 1 32 10 - 5.5 .188 10-0 2 .218 10.625 15 14 1 x 30 3 5 - 6
AT35102-AB 2 32 10 - 5.5 .188 10-0 2 .218 10.625 15 14 1 x 30 3 5 - 6
AT35121-AB 1 32 10 - 5.5 .188 12-0 2.5 .203 10.625 15 14 1 x 30 3 5 - 6
AT35122-AB 2 32 10 - 5.5 .250 12-0 2.5 .203 10.625 15 14 1 x 30 3 5 - 6
AT35151-AB 1 32 10 - 5.5 .188 15-0 2.5 .203 10.625 15 14 1 x 30 3 5 - 6
AT35152-AB 2 32 10 - 5.5 .250 15-0 2.5 .203 10.625 15 14 1 x 30 3 5 - 6
AT4081-AB 1 37 10 - 5.5 .188 8-0 2 .154 10.625 15 14 1.25 x 48 3 6 - 0
AT4082-AB 2 37 10 - 5.5 .250 8-0 2 .154 10.625 15 14 1.25 x 48 3 6 - 0
AT40101-AB 1 37 10 - 5.5 .188 10-0 2 .218 10.625 15 14 1.25 x 48 3 6 - 0
AT40102-AB 2 37 10 - 5.5 .250 10-0 2 .218 10.625 15 14 1.25 x 48 3 6 - 0
AT40121-AB 1 37 10 - 5.5 .188 12-0 2.5 .203 10.625 15 14 1.25 x 48 3 6 - 0
AT40122-AB 2 37 10 - 5.5 .250 12-0 2.5 .203 10.625 15 14 1.25 x 48 3 6 - 0
AT40151-AB 1 37 10 - 5.5 .188 15-0 2.5 .203 10.625 15 14 1.25 x 48 3 6 - 0
AT40152-AB 2 37 10 - 5.5 .250 15-0 2.5 .203 10.625 15 14 1.25 x 48 3 6 - 0
25
30
35
40
Height Taper Wall
L
FEET FEET IN. IN. IN.FEET IN. IN. IN. IN. IN. IN. FEET
H C A BC S E DA/BOLTS
Length Taper Wall
TRAFFIC
aluminous.com
ROUND TAPERED ALUMINUM TRAFFIC POLESFor use with Post-Top Mounted Traffic Signals
ATP6408-AB
POLE DESIGNATION:
TAPER (see chart)
TRAFFIC POLE MOUNTING HEIGHT
ANCHOR BASE
APPLICATION:For use with post-top mounted traffic signals.
EQUIPMENT:Poles are supplied complete with 2 -1/2" x 5"
handhole and cover, 3/4" x 24" anchor bolts (4),
washers, shims, cover caps and grounding lug.
FINISH:Rotary polished natural aluminum.
14
H
A
BC
S
E
aluminous.com
NOTE: Drawings are Pictorial Only
ROUND TAPERED ALUMINUM TRAFFIC POLESFor use with Post-Top Mounted Traffic Signals
NOTES: Pole to support traffic signal not exceeding 10 sq. ft. x 100 lbs.
CatalogueNumber
Height
H
FEET INCHES INCHES IN.
A BC S EAnchor Bolts
IN. IN.IN. IN.
Taper WallThickness Anchor Base Detail
ATP6408-AB 8 6 - 4.5 .188 6.75 9.5 10.25 .75 x 24 2
ATP6410-AB 10 6 - 4.5 .188 6.75 9.5 10.25 .75 X 24 2
ATP6412-AB 12 6 - 4.5 .188 6.75 9.5 10.25 .75 X 24 2
ATP6415-AB 15 6 - 4.5 .188 6.75 9.5 10.25 .75 X 24 2
ROUND TAPERED ALUMINUM TRAFFIC POLESFor use with Single Member Arm (SMA brackets)
aluminous.com
NOTE: Drawings are Pictorial Only
ROUND TAPERED ALUMINUM TRAFFIC POLESFor use with Single Member Arm (SMA brackets)
NOTES: For traffic signals up to 8 sq. ft. x 70 lbs.* Suitable for single SMA brackets up to 15 and with a second bracket at 90 up to 12
** Suitable for single SMA brackets up to 22 and with a second bracket at 90 up to 15.Also suitable for 2 SMA bracketsss up to 15 at 180 or any angle from 90 - 180.
*** Suitable for 2 SMA brackets up to 22 at any angle from 90 - 180.
CatalogueNumber
Height
H
FEET INCHES INCHES IN.
A BC S EAnchor Bolts
IN. IN.IN. IN.
Taper WallThickness Anchor Base Detail
ATP8619-AB* 19 8 - 6.625 .188 8.125 11.5 12 1 x 30 2.75
ATP10819-AB** 19 10 - 8 .188 10.625 15 14 1 x 30 3
ATP10819H-AB*** 19 10 - 8 .250 11.0625 16 16 1.25 x 48 3
SINGLE MAST ARM BRACKETS (SMA)Tape r ed A l um i n um B r a c k e t s
aluminous.com
NOTE: Drawings are Pictorial Only
See table below for dimensions H, Y, arm taper and wall thickness.
Attachment pole plates and hardware are galvanized steel.
* Attachement Fitting not included.A. customer to supply 4 x 5/8 dia.. through bolts or 1 through bolt & 4 x 5/8 dia. lag screws.B. customer to supply 4 x 5/8 dia.. through bolts.Attachment pole plates are galvanized steel.
SINGLE MAST ARM BRACKETS (SMA)Tape r ed A l um i n um B r a c k e t s
For round or octaganol pole mounting, metal or concrete
DIM.L
Dimension D - Pole Diameter (or A/F Octagonal)
4 - 4 15/16 5 - 5 15/16 6 - 6 15/16 7 - 8 8 1/16 - 10
4 ATR4SMA-45 ATR4SMA-56 ATR4SMA-67 ATR4SMA-78 ATR4SMA-81
6 ATR6SMA-45 ATR6SMA-56 ATR6SMA-67 ATR6SMA-78 ATR6SMA-81
8 ATR8SMA-45 ATR8SMA-56 ATR8SMA-67 ATR8SMA-78 ATR8SMA-81
10 ATR10SMA-56 ATR10SMA-67 ATR10SMA-78 ATR10SMA-81
12 ATR12SMA-56 ATR12SMA-67 ATR12SMA-78 ATR12SMA-81
15 ATR15SMA-56 ATR15SMA-67 ATR15SMA-78 ATR15SMA-81
18 ATR18SMA-67 ATR18SMA-78 ATR18SMA-81
20 ATR20SMA-67 ATR20SMA-78 ATR20SMA-81
22 ATR22SMA-67 ATR22SMA-78 ATR22SMA-81
For wood pole mounting
DIM.L
Pole Diameter
8 - 10 10 - 14
DIMH
AngleY
ARMTAPER
WallThickness
*AttachmentFittings
4 ATW4SMA-81 ATW4SMA-114 1 - 9 .125 25 4-2.375 dia.
6 ATW6SMA-81 ATW6SMA-114 2 - 0 .125 25 4-2.375 dia.
8 ATW8SMA-81 ATW8SMA-114 2 - 9 .125 25 4-2.375 dia.
10 ATW10SMA-81 ATW10SMA-114 2 - 0 .125 15 5-2.375 dia.
12 ATW12SMA-81 ATW12SMA-114 2 - 9 .125 15 5-2.375 dia.
15 ATW15SMA-81 ATW15SMA-114 3 - 6 .188 15 5-2.375 dia.
18 ATW18SMA-114 3 - 0 .188 10
20 ATW20SMA-114 3 - 6 .188 10
22 ATW22SMA-114 3 - 9 .188 10
6-3 dia.plus tenon
2.375 dia. x 4
A
B
TRAFFIC SIGNAL MAST ARMS(UNBRACED) 2, 4 AND 6 FEET
aluminous.com
NOTE: Drawings are Pictorial Only
CUSTOM ARM BRACKETS
aluminous.com
TAPERED ELLIPTICAL ALUMINUM BRACKET
aluminous.com
NOTE: Drawings are Pictorial Only
ProductNumber
TTaper
LLength
RRise
ALS-RE4M 3-2 3/8 4 2
ALS-RE6M 3 1/2 - 2 3/8 6 3
ALS-RE8M 4 - 2 3/8 8 4
ALS-RE10M 4 - 2 3/8 10 4
ALS-RE12M 4 - 2 3/8 12 4
SPECIFICATION FEATURES
Wind Load: Brackets are suitable for wind speed of 100 MPH WITH A 1.3 GUST FACTOR
Polished natural aluminum finish Easy installation Modern design No maintenance required
Tenon Size:2 IPS2 3/8 O.D.
Bracket to Support Luminaire Not Exceeding:2 1/2 Sq.Ft. x 60 lbs. or 3 Sq.In.Ft. x 50 lbs.
BRADWICK ARM BRACKET
aluminous.com
NOTE: Drawings are Pictorial Only
SINGLE BEND COLONIAL BRACKET ARMS
aluminous.com
NOTE: Drawings are Pictorial Only
NOTES:
1. All dimensions are in millimeters unless otherwise specified2. Bolt head, round washers and lockwashers painted to match brackets colour3. Bracket colour to be semi-gloss brown no. DCL 49-31 from
Duracoat Power Manufacturing Inc.13 Iroquois Trail, Grimsby, ONT. L3M 5E6, Tel: (905) 945-0073
4. Street light bracket to be made of aluminum5. All 5/8 round flat washer to be 1/8 thick and shall have an O.D. of 1 3/4
SINGLE BEND COLONIAL BRACKET ARMS
Quantity Description
4 3/8 x 1 1/2 Stainless Steel Bolt
4 3/8 Stainless Steel Lock Washer
4 3/8 Stainless Steel Lock Washer
2 5/8 x 8 Galvanized Machine Bolt and Nut
1 5/8 x 1 1/2 Stainless Steel Bolt
3 5/8 Stainless Steel Lock Washer
3 5/8 Stainless Steel Round Flat Washer (Note 5)
1 1/2 x 1 1/2 Stainless Steel Bolt
1 1/2 Stainless Steel Lock Washer
1 1/2 Stainless Steel Round Flat Washer
DOUBLE BEND BRAMPTON ARM
aluminous.com
NOTE: Drawings are Pictorial Only
DOUBLE BEND BRAMPTON ARM
aluminous.com
NOTE: Drawings are Pictorial Only
FLAG POLES
aluminous.com
NOTE: Other sizes available on request. Please contact oursales staff for you specific requirements.
SPECIFICATION TABLE
COMMERCIAL GROUND SET FLAGPOLE
aluminous.com
NOTE: Drawings are Pictorial Only
BSInches
(L) FT. IN IN
HeightOverall
BottomDiameter
WallThickness
PoleSections
AFP-15-53 1 .156AFP-19-53 1 .156
AFP-19-4237 1 .125AFP-24-53 24 .156
AFP-24-4237 24 .125AFP-29-53 2 .156
AFP-29-4237 2 .125AFP-34-63 34 .188 1 (or) 2AFP-34-53 34 .156 1 (or) 2AFP-38-63 38 .188 1 (or) 2AFP-40-63 40 .188
ACCESSORIES
aluminous.com
TRANSFORMER BASE SPECIFICATIONS
aluminous.com
NOTE: Drawings are Pictorial Only
PTB-30
This base features 11 to 13 top boltcircle and 13 to 15 bottom bolt circle.Stands 20 in height. Base can beordered with hinged door option or withstandard access door.
PTB-25
This base features 10 to 12 top boltcircle and 10 to 12 bottom bolt circle.Stands 20 in height. Base can beordered with hinged door option or withstandard access door.
PTB-20
This base features 10 to 12 top boltcircle and 10 to 12 bottom bolt circle.Stands 17 in height. Base can beordered with hinged door option or withstandard access door.
PTB-40
This base features 13 to 15 1/8 topbolt circle and 15 to 17 1/4 bottombolt circle. Stands 20 in height. Basecan be ordered with hinged door optionor with standard access door.
PTB-35
This base features 13 to 15 1/8 topbolt circle and 15 to 17 1/4 bottombolt circle. Stands 20 in height. Basecan be ordered with hinged door optionor with standard access door.
BRAMPTON POLE CAP
aluminous.com
NOTE: Drawings are Pictorial Only
Brampton Pole Cap is made from cast aluminum construction of A356 Aluminum alloy
designed for decorative poles with Victorian style decorative luminaires.
TUBULAR & ANGLE IRON CROSSARMS
aluminous.com
NOTE: Drawings are Pictorial Only
BULL HORN BRACKETS
aluminous.com
NOTE: Drawings are Pictorial Only
TUBULAR TENON BRACKETSTubular Crossarm Style Brackets
aluminous.com
NOTE: Drawings are Pictorial Only
TUBULAR CUSTOM BRACKETSTubular Crossarm S Style Brackets for SSQ 4/5 Poles
aluminous.com
NOTE: Drawings are Pictorial Only
STYLE All Arms 4 Square Tube.
CMC 2 @ 90CMC 2 @ 180 (shown)CMC 3 @ 90CMC 4 @ 90
TENON OPTIONReplace S With T in above styles
CUSTOM BANNER ARMS
aluminous.com
NOTE: Drawings are Pictorial Only
Specification:
Custom 3/4 Pipe Banner Armswith Ring and Optional Scrolls
ANCHOR BOLTS SPECIFICATIONS
aluminous.com
NOTE: Drawings are Pictorial Only
STRAIGHT SHAFT
Diameter Length ofMaterialLength AfterFormatting
Lengthof Thread
Length ofHook
Number ofNuts
Total WeightPer Set
1/2 14 12 2 2 1 3 lbs.
5/8 16 15 2 1/2 2 1/2 1 8 lbs.
3/4 23 1/2 20 3 3 2 14 lbs.
1 24 21 1/2 4 4 2 26 lbs
1 34 30 4 4 2 36 lbs.
1 1/8 40 36 4 4 2 72 lbs.
Material Galvanized Steel - 44 kpsi Yield
Anchor Bolt Projection: 3 -4 inches
Concrete Min. Yield: 3500 psi
All holes on base are 1/4 larger than Anchor BoltDiameter
Please call for price
Notes:
Discounts do not apply when Anchor Bolt purchased without Poles
Federal & Provincial Taxes Extra
aluminous.com
OPTIONS AND EXTRAS
The Following are list prices:
Custom Powder Finish P.O.R.
Custom Matching Wet Paint P.O.R.
Refinishing P.O.R.
Additional Drilling (per side) P.O.R.
Duplex Receptacle Provision P.O.R.
Hand Hole Cover only c/w Hardware P.O.R.
Extra Hand Hole Cut Out and Cover P.O.R.
Template P.O.R.
Pole Top Adapter P.O.R.
Steel Base Covers:
3 round P.O.R.
4 round P.O.R. 4 square P.O.R.
5 round P.O.R. 5 square P.O.R.
6 round P.O.R. 6 square P.O.R.
1. Minimum order is $75.00
2. Standard polyester finishes are Black or Dark Bronze.
3. No Discounts apply to above options and extras.
CUSTOMIZED ITEMS AVAILABLE UPON REQUEST.
Top Related