Download - All Proses

Transcript

4.3 Proses

Langkah Pembinaan

BI

L

ARAHAN VISUAL

1 Command: _lineSpecify first point:Specify next point or [Undo]: <Ortho on> 4Specify next point or [Undo]: 8Specify next point or [Close/Undo]: 4Specify next point or [Close/Undo]: 8Command: PEDITSelect polyline or [Multiple]:Object selected is not a polylineDo you want to turn it into one? <Y> yEnter an option [Close/Join/Width/Edit vertex/Fit/Spline/Decurve/Ltype gen/Reverse/Undo]: jSelect objects: 1 found, 4 totalSelect objects:3 segments added to polylineEnter an option [Open/Join/Width/Edit vertex/Fit/Spline/Decurve/Ltype gen/Reverse/Undo]:

Command: _extrudeCurrent wire frame density: ISOLINES=4, Closed profiles creation mode = SolidSelect objects to extrude or [MOde]: _MO Closed profiles creation mode [SOlid/SUrface] <Solid>: _SOSelect objects to extrude or [MOde]: 1 foundSelect objects to extrude or [MOde]:Specify height of extrusion or [Direction/Path/Taper angle/Expression]: 4

2 Command: _lineSpecify first point:Specify next point or [Undo]: 15Specify next point or [Undo]: 4Specify next point or [Close/Undo]: 15Specify next point or [Close/Undo]: 4Specify next point or [Close/Undo]:Command:

Command: PEDITSelect polyline or [Multiple]:Object selected is not a polylineDo you want to turn it into one? <Y> yEnter an option [Close/Join/Width/Edit vertex/Fit/Spline/Decurve/Ltype gen/Reverse/Undo]: jSelect objects: 1 foundSelect objects: 1 found, 2 totalSelect objects: 1 found, 3 totalSelect objects: 1 found, 4 totalSelect objects:3 segments added to polylineEnter an option [Open/Join/Width/Edit vertex/Fit/Spline/Decurve/Ltype gen/Reverse/Undo]:Command: _extrudeCurrent wire frame density: ISOLINES=4, Closed profiles creation mode = SolidSelect objects to extrude or [MOde]: _MO Closed profiles creation mode [SOlid/SUrface] <Solid>: _SOSelect objects to extrude or [MOde]: 1 foundSelect objects to extrude or [MOde]:Specify height of extrusion or [Direction/Path/Taper angle/Expression] <4.0000>: 2

3 Command: _lineSpecify first point:Specify next point or [Undo]:Specify next point or [Undo]: 1Specify next point or [Close/Undo]: 8Specify next point or [Close/Undo]: 1Specify next point or [Close/Undo]:Command: _lineSpecify first point:Specify next point or [Undo]: 2Specify next point or [Undo]: 8Specify next point or [Close/Undo]:Command: _lineSpecify first point:Specify next point or [Undo]: 1Command: _moveSelect objects: 1 foundSelect objects:Specify base point or [Displacement] <Displacement>:Specify second point or <use first point as displacement>:

4 Command: _boxSpecify first corner or [Center]:Specify other corner or [Cube/Length]: lSpecify length: 2Specify width: 1Specify height or [2Point] <12.0000>: 10

5 Command: _moveSelect objects: Specify opposite corner: 0 foundSelect objects: 1 foundSelect objects:Specify base point or [Displacement] <Displacement>:Specify second point or <use first point as displacement>:

6 Command: SUBTRACTSelect solids, surfaces, and regions to subtract from ..Select objects: 1 foundSelect objects:Select solids, surfaces, and regions to subtract ..Select objects: 1 foundSelect objects:

7 Command: _polygonEnter number of sides <6>: 6Specify center of polygon or [Edge]:Enter an option [Inscribed in circle/Circumscribed about circle] <C>: cSpecify radius of circle: 0.5Command: _extrudeCurrent wire frame density: ISOLINES=4, Closed profiles creation mode = SolidSelect objects to extrude or [MOde]: _MO Closed profiles creation mode [SOlid/SUrface] <Solid>: _SOSelect objects to extrude or [MOde]: 1 foundSelect objects to extrude or [MOde]:Specify height of extrusion or [Direction/Path/Taper angle/Expression] <2.0000>: 2(Buat 2 lagi polygon – Radius : 0.75, 1)

Command: _moveSelect objects: 1 foundSelect objects:Specify base point or [Displacement] <Displacement>:Specify second point or <use first point as displacement>:

8 Command: SUBTRACTSelect solids, surfaces, and regions to subtract from ..Select objects: 1 foundSelect objects:Select solids, surfaces, and regions to subtract ..Select objects: 1 foundSelect objects:(Subtract ketiga-tiga polygon)

9 Command:_boxSpecify first corner or [Center]:Specify other corner or [Cube/Length]: lSpecify length <2.0000>: 5Specify width <1.0000>: 5Specify height or [2Point] <2.0000>: 3

Command: FILLETCurrent settings: Mode = TRIM, Radius = 0.0000Select first object or [Undo/Polyline/Radius/Trim/Multiple]:Enter fillet radius or [Expression]: 0.5Select an edge or [Chain/Loop/Radius]:1 edge(s) selected for fillet.(Repeat for 3 other edges)

10 Command: _moveSelect objects: 1 foundSelect objects:Specify base point or [Displacement] <Displacement>:Specify second point or <use first point as displacement>:

11 Command: _cylinderSpecify center point of base or [3P/2P/Ttr/Elliptical]:Specify base radius or [Diameter] <2.5000>: dSpecify diameter <5.0000>: 6Specify height or [2Point/Axis endpoint] <3.0000>: 3Command: _moveSelect objects: 1 foundSelect objects:Specify base point or [Displacement] <Displacement>:

Specify second point or <use first point as displacement>:

12 Command: _boxSpecify first corner or [Center]:Specify other corner or [Cube/Length]: LSpecify length: 0.5Specify width: 0.5Specify height or [2Point] <0.2500>: 1

13 Command: _lineSpecify first point:Specify next point or [Undo]: 0.5Specify next point or [Undo]:Specify next point or [Close/Undo]:Command: REGIONSelect objects: Specify opposite corner: 3 foundSelect objects:1 loop extracted.1 Region createdCommand: _extrudeCurrent wire frame density: ISOLINES=4, Closed profiles creation mode = SolidSelect objects to extrude or [MOde]: _MO Closed profiles creation mode [SOlid/SUrface] <Solid>: _SOSelect objects to extrude or [MOde]: 1 foundSelect objects to extrude or [MOde]:Specify height of extrusion or [Direction/Path/Taper angle/Expression] <2.0000>: 0.5

14 Command: _mirror3dSelect objects: 1 foundSelect objects:Specify first point of mirror plane (3 points) or[Object/Last/Zaxis/View/XY/YZ/ZX/3points] <3points>: Specify second point on mirror plane: Specify third point on mirror plane:Delete source objects? [Yes/No] <N>: N

15 Command: _boxSpecify first corner or [Center]:Specify other corner or [Cube/Length]: LSpecify length <0.5000>: 0.5Specify width <0.5000>: 0.5Specify height or [2Point] <0.5000>: 1Command: _moveSelect objects: 1 foundSelect objects:Specify base point or [Displacement] <Displacement>:Specify second point or <use first point as displacement>:(Move kedua-dua objek– Bil14)

Command: SUBTRACTSelect solids, surfaces, and regions to subtract from ..Select objects: 1 foundSelect objects:Select solids, surfaces, and regions to subtract ..Select objects: 1 found(Subtract kedua-dua objek– Bil14)

16 Command: _boxSpecify first corner or [Center]:Specify other corner or [Cube/Length]: LSpecify length <0.5000>: 0.5Specify width <0.5000>: 0.5Specify height or [2Point] <1.0000>: 2

17 Command: _cylinderSpecify center point of base or [3P/2P/Ttr/Elliptical]:Specify base radius or [Diameter] <0.5000>: dSpecify diameter <1.0000>: 1Specify height or [2Point/Axis endpoint] <8.0000>: 4Command:Command:Command: _cylinderSpecify center point of base or [3P/2P/Ttr/Elliptical]:Specify base radius or [Diameter] <0.5000>: dSpecify diameter <1.0000>: 0.75Specify height or [2Point/Axis endpoint] <4.0000>: 2

18 Command: _moveSelect objects: 1 foundSelect objects:Specify base point or [Displacement] <Displacement>:Specify second point or <use first point as displacement>:(Gabungkan semua objek dalam Bil 5, 16, 17)

Command: _union

Select objects: Specify opposite corner: 8 foundSelect objects:

19 Command: CYLCYLINDER (A)Specify center point of base or [3P/2P/Ttr/Elliptical]:Specify base radius or [Diameter] <0.3000>: DSpecify diameter <0.6000>: 0.4Specify height or [2Point/Axis endpoint] <0.0001>: 2.2

Command: CYLINDER (B)Specify center point of base or [3P/2P/Ttr/Elliptical]:Specify base radius or [Diameter] <0.2000>: DSpecify diameter <0.4000>: 0.6Specify height or [2Point/Axis endpoint] <2.2000>: 2.2

Command: _3drotateCurrent positive angle in UCS: ANGDIR=counterclockwise ANGBASE=0Select objects: 1 foundSelect objects:Specify base point:** ROTATE **Specify rotation angle or [Base point/Copy/Undo/Reference/eXit]:Command:

20 Command: _moveSelect objects: 1 foundSelect objects:Specify base point or [Displacement] <Displacement>:Specify second point or <use first point as displacement>:Command: SUBTRACTSelect solids, surfaces, and regions to subtract from ..Select objects: 1 foundSelect objects:Select solids, surfaces, and regions to subtract ..Select objects: 1 foundSelect objects:(Subtract Cylinder A daripada cylinder B)

21 Command: _moveSelect objects: 1 foundSelect objects:Specify base point or [Displacement] <Displacement>:Checking 820 intersections...Specify second point or <use first point as displacement>:Command: SUBTRACTSelect solids, surfaces, and regions to subtract from ..Select objects: 1 foundSelect objects:

22 Command: _moveSelect objects: 1 foundSelect objects:Specify base point or [Displacement] <Displacement>:Too many objects selected for INTERSECTSpecify second point or <use first point as displacement>:Command: SUBTRACTSelect solids, surfaces, and regions to subtract from ..Select objects: 1 foundSelect objects:Select solids, surfaces, and regions to subtract ..Select objects: 1 foundSelect objects:

23 Command: _lineSpecify first point:Checking 595 intersections...Specify next point or [Undo]: 0.5Specify next point or [Undo]: 0.1Specify next point or [Close/Undo]: 0.6Specify next point or [Close/Undo]:Specify next point or [Close/Undo]:Command: _moveSelect objects: 1 foundSelect objects:Specify base point or [Displacement] <Displacement>:Specify second point or <use first point as displacement>:Command:

24 Command: _moveSelect objects: 1 foundSelect objects: 1 found, 2 totalSelect objects:Specify base point or [Displacement] <Displacement>:Too many objects selected for INTERSECTSpecify second point or <use first point as displacement>:

25 Command: _unionSelect objects: Specify opposite corner: 32 foundSelect objects: