Download - AL4RPV50 Cable + Connectors

Transcript
  • AL4RPVAL4RPV--5050 AL4RPV50,HELIAXPlenumRatedAirDielectricCoaxialCable,corrugatedaluminum,1/2in,offwhitePVCjacket

    l ThisproductispartoftheCommScopeWiredforWirelessSolution

    Construction Materials JacketMaterial PVCDielectricMaterial PEsplineFlexibility StandardInnerConductorMaterial CoppercladaluminumwireJacketColor OffwhiteOuterConductorMaterial Corrugatedaluminum

    Dimensions NominalSize 1/2inCableWeight 0.21kg/m | 0.14lb/ftDiameterOverJacket 15.926mm | 0.627inInnerConductorOD 4.5720mm | 0.1800inOuterConductorOD 14.046mm | 0.553in

    Electrical Specifications CableImpedance 50ohm2ohmCapacitance 76.0pF/m | 23.0pF/ftdcResistance,InnerConductor 1.570ohms/km | 0.480ohms/kftdcResistance,OuterConductor 1.570ohms/km | 0.480ohms/kftdcTestVoltage 4000VInductance 0.190H/m | 0.058H/ftInsulationResistance 100000MohmskmJacketSparkTestVoltage(rms) 5000VOperatingFrequencyBand 16000MHzPeakPower 40.0kWPowerAttenuation 2.325PulseReflection 0.5%Velocity 86.5%

    Environmental Specifications InstallationTemperature 5Cto+60C(+23Fto+140F)OperatingTemperature 20Cto+85C(4Fto+185F)StorageTemperature 20Cto+85C(4Fto+185F)

    General Specifications Brand HELIAX

    Mechanical Specifications BendingMoment 6.8Nm | 5.0ftlb

    Product SpecificationsProduct Specifications

    2013CommScope, Inc. All rights reserved. All trademarks identified by 2013CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.or are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013

    Page 1 of 16Page 1 of 16 July 29, 2013July 29, 2013

  • FireRetardancyTestMethod NFPA262/CATVP/CMPFlatPlateCrushStrength 1.4kg/mm | 80.0lb/inMinimumBendRadius,MultipleBends 127.00mm | 5.00inMinimumBendRadius,SingleBend 64.00mm | 2.50inNumberofBends,minimum 15TensileStrength 79kg | 175lb

    Note PerformanceNote Valuestypical,unlessotherwisestated

    Standard Conditions Attenuation,AmbientTemperature 20C | 68FAveragePower,AmbientTemperature 40C | 104FAveragePower,InnerConductorTemperature100C | 212F

    Return Loss/VSWRFrequencyBand VSWR ReturnLoss(dB)806960MHz 1.25 19.0017002200MHz 1.25 19.00

    Product SpecificationsProduct SpecificationsAL4RPVAL4RPV--5050

    2013CommScope, Inc. All rights reserved. All trademarks identified by 2013CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.or are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013

    Page 2 of 16Page 2 of 16 July 29, 2013July 29, 2013

  • AttenuationFrequency(MHz) Attenuation(dB/100m) Attenuation(dB/100ft) AveragePower(kW)0.5 0.152 0.046 40.001 0.216 0.066 35.371.5 0.264 0.081 28.842 0.306 0.093 24.9510 0.691 0.211 11.0420 0.985 0.3 7.7530 1.213 0.37 6.2950 1.581 0.482 4.8388 2.126 0.648 3.59100 2.274 0.693 3.35108 2.368 0.722 3.22150 2.821 0.86 2.70174 3.054 0.931 2.50200 3.292 1.003 2.32300 4.104 1.251 1.86400 4.808 1.466 1.59450 5.134 1.565 1.49500 5.445 1.659 1.40512 5.517 1.682 1.38600 6.032 1.839 1.26700 6.583 2.007 1.16800 7.105 2.166 1.07824 7.227 2.203 1.06894 7.574 2.308 1.01960 7.892 2.405 0.971000 8.081 2.463 0.941250 9.207 2.806 0.831500 10.256 3.126 0.741700 11.053 3.369 0.691800 11.439 3.487 0.672000 12.192 3.716 0.632100 12.559 3.828 0.612200 12.92 3.938 0.592300 13.276 4.046 0.572500 13.975 4.259 0.552700 14.656 4.467 0.523000 15.649 4.77 0.493400 16.928 5.159 0.453700 17.859 5.443 0.434000 18.768 5.72 0.415000 21.671 6.605 0.356000 24.42 7.443 0.31

    *Valuestypical,guaranteedwithin5%

    Regulatory Compliance/CertificationsAgency ClassificationRoHS2011/65/EU CompliantISO9001:2008 Designed,manufacturedand/ordistributedunderthisqualitymanagementsystemETLCertification CATVP/CMP

    Product SpecificationsProduct SpecificationsAL4RPVAL4RPV--5050

    2013CommScope, Inc. All rights reserved. All trademarks identified by 2013CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.or are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013

    Page 3 of 16Page 3 of 16 July 29, 2013July 29, 2013

  • Product SpecificationsProduct SpecificationsAL4RPVAL4RPV--5050

    2013CommScope, Inc. All rights reserved. All trademarks identified by 2013CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.or are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013

    Page 4 of 16Page 4 of 16 July 29, 2013July 29, 2013

  • L4TDFL4TDF--PSAPSA 716DINFemalePositiveStopfor1/2inAL4RPV50,LDF450Acable

    General Specifications Interface 716DINFemaleBodyStyle StraightBrand HELIAX | PositiveStopHarmonizedSystem(HS)Code 854420(Coaxialcableandothercoaxialelectricconductors)MountingAngle Straight

    Electrical Specifications ConnectorImpedance 50ohmOperatingFrequencyBand 08800MHzCableImpedance 50ohm3rdOrderIMD,typical 120dBm@910MHz3rdOrderIMDTestMethod Two+43dBmcarriersRFOperatingVoltage,maximum(vrms)1415.00VdcTestVoltage 4000VOuterContactResistance,maximum 1.50mOhmInnerContactResistance,maximum 0.80mOhmInsulationResistance,minimum 5000MOhmAveragePower 1.1kW@900MHzPeakPower,maximum 40.00kWInsertionLoss,typical 0.05dBShieldingEffectiveness 110dB

    Product SpecificationsProduct Specifications

    2013CommScope, Inc. All rights reserved. All trademarks identified by 2013CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.or are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013

    Page 5 of 16Page 5 of 16 July 29, 2013July 29, 2013

  • Outline Drawing

    Mechanical Specifications OuterContactAttachmentMethod RingflareInnerContactAttachmentMethod CaptivatedOuterContactPlating TrimetalInnerContactPlating SilverAttachmentDurability 25cyclesInterfaceDurability 50cyclesInterfaceDurabilityMethod IEC611694:9.5ConnectorRetentionTensileForce 890N | 200lbfConnectorRetentionTorque 5.42Nm | 48.00inlbInsertionForce 200.17N | 45.00lbfInsertionForceMethod IEC611691:15.2.4

    Dimensions NominalSize 1/2inDiameter 74.98mm | 2.95inLength 28.84mm | 1.14inWeight 109.17g | 0.24lb

    Environmental Specifications OperatingTemperature 55Cto+85C(67Fto+185F)StorageTemperature 55Cto+85C(67Fto+185F)ImmersionDepth 1mImmersionTestMating UnmatedImmersionTestMethod IEC60529:2001,IP68

    Product SpecificationsProduct SpecificationsL4TDFL4TDF--PSAPSA

    2013CommScope, Inc. All rights reserved. All trademarks identified by 2013CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.or are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013

    Page 6 of 16Page 6 of 16 July 29, 2013July 29, 2013

  • WaterJettingTestMating UnmatedWaterJettingTestMethod IEC60529:2001,IP66MoistureResistanceTestMethod MILSTD202F,Method106FMechanicalShockTestMethod MILSTD202,Method213,TestConditionIThermalShockTestMethod MILSTD202F,Method107G,TestConditionA1,LowTemperature55CVibrationTestMethod IEC6006826CorrosionTestMethod MILSTD1344A,Method1001.1,TestConditionA

    Return Loss/VSWRFrequencyBand VSWR ReturnLoss(dB)451000MHz 1.02 39.0010002200MHz 1.02 39.0022103000MHz 1.04 34.0030105000MHz 1.08 28.00

    Regulatory Compliance/CertificationsAgency ClassificationRoHS2011/65/EU CompliantbyExemptionChinaRoHSSJ/T113642006 AboveMaximumConcentrationValue(MCV)ISO9001:2008 Designed,manufacturedand/ordistributedunderthisqualitymanagementsystem

    * FootnotesImmersionDepth Immersionatspecifieddepthfor24hours

    InsertionLoss,typical 0.05freq(GHz)(notapplicableforellipticalwaveguide)

    Product SpecificationsProduct SpecificationsL4TDFL4TDF--PSAPSA

    2013CommScope, Inc. All rights reserved. All trademarks identified by 2013CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.or are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013

    Page 7 of 16Page 7 of 16 July 29, 2013July 29, 2013

  • L4TDML4TDM--PSAPSA 716DINMalePositiveStopfor1/2inAL4RPV50,LDF450Acable

    General Specifications Interface 716DINMaleBodyStyle StraightBrand HELIAX | PositiveStopHarmonizedSystem(HS)Code 854420(Coaxialcableandothercoaxialelectricconductors)MountingAngle Straight

    Electrical Specifications ConnectorImpedance 50ohmOperatingFrequencyBand 08800MHzCableImpedance 50ohm3rdOrderIMD,typical 120dBm@910MHz3rdOrderIMDTestMethod Two+43dBmcarriersRFOperatingVoltage,maximum(vrms)1415.00VdcTestVoltage 4000VOuterContactResistance,maximum 1.50mOhmInnerContactResistance,maximum 0.80mOhmInsulationResistance,minimum 5000MOhmAveragePower 1.1kW@900MHzPeakPower,maximum 40.00kWInsertionLoss,typical 0.05dBShieldingEffectiveness 110dB

    Product SpecificationsProduct Specifications

    2013CommScope, Inc. All rights reserved. All trademarks identified by 2013CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.or are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013

    Page 8 of 16Page 8 of 16 July 29, 2013July 29, 2013

  • Outline Drawing

    Mechanical Specifications OuterContactAttachmentMethod RingflareInnerContactAttachmentMethod CaptivatedOuterContactPlating TrimetalInnerContactPlating SilverAttachmentDurability 25cyclesInterfaceDurability 500cyclesInterfaceDurabilityMethod IEC611694:9.5ConnectorRetentionTensileForce 890N | 200lbfConnectorRetentionTorque 5.42Nm | 48.00inlbInsertionForce 200.17N | 45.00lbfInsertionForceMethod IEC611691:15.2.4CouplingNutProofTorque 25.00Nm | 221.27inlbCouplingNutRetentionForce 1000.00N | 224.81lbfCouplingNutRetentionForceMethod MILC39012C3.25,4.6.22

    Dimensions NominalSize 1/2inDiameter 34.60mm | 1.36inLength 68.67mm | 2.70inWeight 120.09g | 0.26lb

    Environmental Specifications OperatingTemperature 55Cto+85C(67Fto+185F)StorageTemperature 55Cto+85C(67Fto+185F)

    Product SpecificationsProduct SpecificationsL4TDML4TDM--PSAPSA

    2013CommScope, Inc. All rights reserved. All trademarks identified by 2013CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.or are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013

    Page 9 of 16Page 9 of 16 July 29, 2013July 29, 2013

  • ImmersionDepth 1mImmersionTestMating UnmatedImmersionTestMethod IEC60529:2001,IP68WaterJettingTestMating UnmatedWaterJettingTestMethod IEC60529:2001,IP66MoistureResistanceTestMethod MILSTD202F,Method106FMechanicalShockTestMethod MILSTD202,Method213,TestConditionIThermalShockTestMethod MILSTD202F,Method107G,TestConditionA1,LowTemperature55CVibrationTestMethod IEC6006826CorrosionTestMethod MILSTD1344A,Method1001.1,TestConditionA

    Return Loss/VSWRFrequencyBand VSWR ReturnLoss(dB)451000MHz 1.02 39.0010102200MHz 1.03 37.0022003000MHz 1.05 33.0030104000MHz 1.07 29.0040106000MHz 1.11 26.0060108000MHz 1.15 23.00

    Regulatory Compliance/CertificationsAgency ClassificationRoHS2011/65/EU CompliantbyExemptionChinaRoHSSJ/T113642006 AboveMaximumConcentrationValue(MCV)ISO9001:2008 Designed,manufacturedand/ordistributedunderthisqualitymanagementsystem

    * FootnotesImmersionDepth Immersionatspecifieddepthfor24hours

    InsertionLoss,typical 0.05freq(GHz)(notapplicableforellipticalwaveguide)

    Product SpecificationsProduct SpecificationsL4TDML4TDM--PSAPSA

    2013CommScope, Inc. All rights reserved. All trademarks identified by 2013CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.or are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013

    Page 10 of 16Page 10 of 16 July 29, 2013July 29, 2013

  • L4TNFL4TNF--PSAPSA TypeNFemalePositiveStopfor1/2inAL4RPV50,LDF450Acable

    General Specifications Interface NFemaleBodyStyle StraightBrand HELIAX | PositiveStopHarmonizedSystem(HS)Code 854420(Coaxialcableandothercoaxialelectricconductors)MountingAngle Straight

    Electrical Specifications ConnectorImpedance 50ohmOperatingFrequencyBand 08800MHzCableImpedance 50ohm3rdOrderIMD,typical 116dBm@910MHz3rdOrderIMDTestMethod Two+43dBmcarriersRFOperatingVoltage,maximum(vrms)707.00VdcTestVoltage 2000VOuterContactResistance,maximum 0.30mOhmInnerContactResistance,maximum 2.00mOhmInsulationResistance,minimum 5000MOhmAveragePower 0.6kW@900MHzPeakPower,maximum 10.00kWInsertionLoss,typical 0.05dBShieldingEffectiveness 130dB

    Product SpecificationsProduct Specifications

    2013CommScope, Inc. All rights reserved. All trademarks identified by 2013CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.or are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013

    Page 11 of 16Page 11 of 16 July 29, 2013July 29, 2013

  • Outline Drawing

    Mechanical Specifications OuterContactAttachmentMethod RingflareInnerContactAttachmentMethod CaptivatedOuterContactPlating TrimetalInnerContactPlating SilverAttachmentDurability 25cyclesInterfaceDurability 500cyclesInterfaceDurabilityMethod IEC6116916:9.5ConnectorRetentionTensileForce 890N | 200lbfConnectorRetentionTorque 5.42Nm | 48.00inlbInsertionForce 66.72N | 15.00lbfInsertionForceMethod MILC39012C3.12,4.6.9

    Dimensions NominalSize 1/2inDiameter 22.35mm | 0.88inLength 73.65mm | 2.90inWeight 88.46g | 0.20lb

    Environmental Specifications OperatingTemperature 55Cto+85C(67Fto+185F)StorageTemperature 55Cto+85C(67Fto+185F)ImmersionDepth 1mImmersionTestMating UnmatedImmersionTestMethod IEC60529:2001,IP68

    Product SpecificationsProduct SpecificationsL4TNFL4TNF--PSAPSA

    2013CommScope, Inc. All rights reserved. All trademarks identified by 2013CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.or are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013

    Page 12 of 16Page 12 of 16 July 29, 2013July 29, 2013

  • WaterJettingTestMating UnmatedWaterJettingTestMethod IEC60529:2001,IP66MoistureResistanceTestMethod MILSTD202F,Method106FMechanicalShockTestMethod MILSTD202,Method213,TestConditionIThermalShockTestMethod MILSTD202F,Method107G,TestConditionA1,LowTemperature55CVibrationTestMethod IEC6006826CorrosionTestMethod MILSTD1344A,Method1001.1,TestConditionA

    Return Loss/VSWRFrequencyBand VSWR ReturnLoss(dB)501000MHz 1.02 39.0010102200MHz 1.03 37.0022103000MHz 1.05 33.0030104000MHz 1.07 29.0040106000MHz 1.12 25.00

    Regulatory Compliance/CertificationsAgency ClassificationRoHS2011/65/EU CompliantbyExemptionChinaRoHSSJ/T113642006 AboveMaximumConcentrationValue(MCV)ISO9001:2008 Designed,manufacturedand/ordistributedunderthisqualitymanagementsystem

    * FootnotesImmersionDepth Immersionatspecifieddepthfor24hours

    InsertionLoss,typical 0.05freq(GHz)(notapplicableforellipticalwaveguide)

    Product SpecificationsProduct SpecificationsL4TNFL4TNF--PSAPSA

    2013CommScope, Inc. All rights reserved. All trademarks identified by 2013CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.or are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013

    Page 13 of 16Page 13 of 16 July 29, 2013July 29, 2013

  • L4TNML4TNM--PSAPSA TypeNMalePositiveStopfor1/2inAL4RPV50,LDF450Acable

    l ThisproductispartoftheCommScopeWiredforWirelessSolution

    General Specifications Interface NMaleBodyStyle StraightBrand HELIAX | PositiveStopHarmonizedSystem(HS)Code 854420(Coaxialcableandothercoaxialelectricconductors)MountingAngle Straight

    Electrical Specifications ConnectorImpedance 50ohmOperatingFrequencyBand 08800MHzCableImpedance 50ohm3rdOrderIMD,typical 116dBm@910MHz3rdOrderIMDTestMethod Two+43dBmcarriersRFOperatingVoltage,maximum(vrms)707.00VdcTestVoltage 2000VOuterContactResistance,maximum 0.30mOhmInnerContactResistance,maximum 2.00mOhmInsulationResistance,minimum 5000MOhmAveragePower 0.6kW@900MHzPeakPower,maximum 10.00kWInsertionLoss,typical 0.05dBShieldingEffectiveness 130dB

    Product SpecificationsProduct Specifications

    2013CommScope, Inc. All rights reserved. All trademarks identified by 2013CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.or are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013

    Page 14 of 16Page 14 of 16 July 29, 2013July 29, 2013

  • Outline Drawing

    Mechanical Specifications OuterContactAttachmentMethod RingflareInnerContactAttachmentMethod CaptivatedOuterContactPlating TrimetalInnerContactPlating SilverAttachmentDurability 25cyclesInterfaceDurability 500cyclesInterfaceDurabilityMethod IEC6116916:9.5ConnectorRetentionTensileForce 890N | 200lbfConnectorRetentionTorque 5.42Nm | 48.00inlbInsertionForce 66.72N | 15.00lbfInsertionForceMethod MILC39012C3.12,4.6.9CouplingNutProofTorque 176.26Nm | 1560.00inlbCouplingNutRetentionForce 444.82N | 100.00lbfCouplingNutRetentionForceMethod MILC39012C3.25,4.6.22

    Dimensions NominalSize 1/2inDiameter 22.35mm | 0.88inLength 76.70mm | 3.02inWeight 94.71g | 0.21lb

    Environmental Specifications OperatingTemperature 55Cto+85C(67Fto+185F)StorageTemperature 55Cto+85C(67Fto+185F)

    Product SpecificationsProduct SpecificationsL4TNML4TNM--PSAPSA

    2013CommScope, Inc. All rights reserved. All trademarks identified by 2013CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.or are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013

    Page 15 of 16Page 15 of 16 July 29, 2013July 29, 2013

  • ImmersionDepth 1mImmersionTestMating UnmatedImmersionTestMethod IEC60529:2001,IP68WaterJettingTestMating UnmatedWaterJettingTestMethod IEC60529:2001,IP66MoistureResistanceTestMethod MILSTD202F,Method106FMechanicalShockTestMethod MILSTD202,Method213,TestConditionIThermalShockTestMethod MILSTD202F,Method107G,TestConditionA1,LowTemperature55CVibrationTestMethod IEC6006826CorrosionTestMethod MILSTD1344A,Method1001.1,TestConditionA

    Return Loss/VSWRFrequencyBand VSWR ReturnLoss(dB)451000MHz 1.02 39.0010102200MHz 1.03 37.0022103000MHz 1.05 33.0030104000MHz 1.09 27.0040106000MHz 1.25 19.0060108000MHz 1.33 17.00

    Regulatory Compliance/CertificationsAgency ClassificationRoHS2011/65/EU CompliantbyExemptionChinaRoHSSJ/T113642006 AboveMaximumConcentrationValue(MCV)ISO9001:2008 Designed,manufacturedand/ordistributedunderthisqualitymanagementsystem

    * FootnotesImmersionDepth Immersionatspecifieddepthfor24hours

    InsertionLoss,typical 0.05freq(GHz)(notapplicableforellipticalwaveguide)

    Product SpecificationsProduct SpecificationsL4TNML4TNM--PSAPSA

    2013CommScope, Inc. All rights reserved. All trademarks identified by 2013CommScope, Inc. All rights reserved. All trademarks identified by or are registered trademarks, respectively, of CommScope.or are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013

    Page 16 of 16Page 16 of 16 July 29, 2013July 29, 2013