AKR Scaffolding AK
R
AKR PRODUCT CATALOGUE - 2015
– 2 –
AKR Scaffolding AK
R
Ind
us
tria
l S
he
d f
or
AK
R S
CA
FF
OL
DIN
G F
AC
TO
RY
, R
ab
igh
In
du
str
ial
Cit
y, K
SA
.
– 3 –
It was inevitable that the Gulf Cooperation Council, and understandably its largest member
Kingdom of Saudi Arabia were on its way to a grand regeneration, to establish a portfolio of
well-diversified economic activities. Consequently, it was with the intension to participate and
contribute to the economic boom of this movement that inspired us to institute our mark and
cater to the whole Kingdom since 2007. The AKR Brand and Factory has been a synonym of
competitiveness and innovative capacity for over six years locally, and over twenty-five years of
excellence in Asia.
We have successfully pooled our complete expertise, in the field of Specialized Steel
Fabrication and our Superior Sourcing of Quality Products from around the world, to
successfully supply our Scaffolding Products and Services to the leaders of the Construction
Industry. Helping them plan, execute and handover major projects around the Kingdom timely
and with finer quality. Our driving force in this initiative is our belief that safety is paramount in
this industry and it can only be achieved by providing superior quality consistently to our
customers.
Over the years we have been able to increase our revenues and improve our economic, capital
and financial results, thanks to the policies of investment in innovation, future technologies, and
diversification in new products and services, which have characterized our business history
and played an important role in our growth. The great commercial success in recent years
would not have been possible if significant investment had not been made upstream in human
resources, technology, internal organization, as well as forming several Real, Rewarding and
Rich alliances with local entities.
Much has been achieved over the years but we remain aware that much still remains to be
done, in order to maintain the competitive position conquered and to continue building upon it.
To give further strength to this venture we have recently completed a new state of the art
manufacturing facility in the industrial city of Rabigh. It is equipped with the most modern
automation for above average efficiency and stringent quality controls.
We continue to develop our process and procedures for superior service to our customers and
build our reputation of providing quality products and services in the most economical and cost
effective manner. Providing consistent value for money to our customers while creating
economic value for our stakeholders are the real key to our success. We continue to promote a
business process environment that excels with Teamwork as well as Individual Accountability.
Thanks must go to all our employees for their continuously growing commitment and sincerity
with which they strive to tackle all challenges that the market imposes. We, as part of our
company philosophy, demand and expect nothing less from our Team.
A rightful thank-you must also go to the bodies and institutions which assist us and which are
by our side every day in the development process. We are proud of what we have achieved
thus far in this dynamic market and strive to grow and expand in bringing Saudi-made products
to you and serve you better.
A MESSAGE FROM US
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
– 4 –
MADE IN SAUDI ARABIA
In order to always maintain an excellent quality standard in our products we only use raw materials purchased from carefully selected suppliers.
The production process is subjected to systematic quality controls at every stage, the production cycles are automated and the staff is trained to ensure always the ability to use the technologically advanced machines.
All this makes AKR Factory one of the leaders in the design and production of technical elements for specialized building systems.
The company, which offers a wide range of products: Cuplock Scaffolding, Prop & Shore System, Access Frames, Formworks & Accessories. All of the modular, able to meet every requirements of the modern construction industry in line with the most evolved needs in both performance and safety terms.
OUR TECHNOLOGY
AKR Factory constantly dedicates time and large investments in order to remain in the vanguard of new technologies. The purchase and use of advanced machinery permits more automated production and control of the entire process in order to guarantee highly reliable products for our customers.
OUR MISSION
Our mission is to become a point of reference in the Kingdom for the production of equipments for the building industry.
We want to be a reliable partner for all entities, across all applicable activities be it Construction or Industrial. We can design and adapt our products to the specific market needs and offer solutions to our customers in order to provide them with a real competitive advantage.
We support the companies in the best and the fastest possible way, with qualified specialized staff able to meet any customized request.
Our aim is not just to pursue an economic profit: this as we believe“our growth and our development will proceed at the same pace of those of our business partners”.
OUR SERVICES
We consider that it is not enough to have a good product. Each work has specific difficulties, different characteristics and single necessities. So, each work deserves a unique treatment and often the ideal solution is not available to the end user. We like to help our customer to find the best solution, through our technical team, by drafting the implementation of systems, providing structure calculations, and estimating equipment quantities.
Based on experience accumulated over several years, we help our customers maximize the usefulness of our products and system.
OUR TEAM
Team spirit is one of the fundamental values of AKR FACTORY and the company's strength derives from the collaboration of all the people who work in the various departments. Every individual plays a fundamental role in the pursuit of the company objectives and, as such, it is considered, appreciated and valued.
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
– 5 –
QUALITY POLICY :-
�A�j�a�y� �K�u�m�a�r� �R�a�j� �B�h�a�t�i�a� �F�a�c�t�o�r �y� �i�s� �c�o�m�m�i�t�t�e�d� �t�o� �p�r�o�v�i�d�i�n�g� �s�u�p�e�r�i�o�r� �q�u�a�l�i�t�y� �o�f� �p�r�o�d�u�c�t�s� �a�n�d� �s�e�r �v�i�c�e�s� �t�o� �s�u�p�e�r�s�e�d�e� �t�h�e� �e�x�p�e�c�t�a�t�i�o�n�s� �o�f� �o�u�r� �c�u�s�t�o�m�e�r�s�.
�W�e� �s�t�r�i�v�e� �t�o� �a�c�h�i�e�v�e� �t�h�i�s� �g�o�a�l� �b�y�:
�I�d�e�n�t�i�f�y�i�n�g� �a�n�d� �f�u�l�f�i�l �l �i �n�g� �o�u�r� �C�u�s�t�o�m�e�r� �R�e�q�u�i�r�e�m�e�n�t�s� �w�h�i�l�e� �d�e�l�i�v�e�r�i�n�g� �o�n� �t�i�m�e� �a�n�d� �i�n� �c�o�n�f�o�r �m�a�n�c�e� �w�i�t�h� �t�h�e� �b�e�n�c�h�m�a�r�k�e�d� �s�t�a�n�d�a�r�d�s� �a�n�d� �c�o�d�e�s�,� �e�v�e�r �y� �t�i�m�e�.� � �
�E�x�t�e�n�d�i�n�g� �e�x�c�e�l�l�e�n�t� �C�u�s�t�o�m�e�r� �S�u�p�p�o�r �t� �a�n�d� �s�e�r �v�i�c�e�s� �a�t� �a�l�l� �t�i �m�e�s�.
�D�e�v�e�l�o�p�i�n�g� �e�m�p�l�o�y�e�e� �s�k�i�l�l�s� �t�h�r�o�u�g�h� �t�r�a�i�n�i�n�g�,� �m�o�t�i�v�a�t�i�o�n� �a�n�d� �e�m�p�o�w�e�r �m�e�n�t�.� �T�h�e� �c�o�m�p�a�n�y� �w�o�r�k�s� �t�o�w�a�r�d�s� �a�c�h�i�e�v�i�n�g� �T�r �u�e� �E�m�p�l�o�y�e�e� �S�a�t�i�s�f�a�c�t�i�o�n�.
�P�r�o�t�e�c�t�i�n�g� �t�h�e� �E�n�v�i�r�o�n�m�e�n�t� �w�e� �w�o�r�k� �i�n�.
�C�o�n�t�i�n�u�o�u�s�l�y� �e�x�p�l�o�r�i�n�g� �n�e�w� �o�p�p�o�r �t�u�n�i�t�i�e�s� �f�o�r� �I�n�n�o�v�a�t�i�o�n� �a�n�d� �D�e�v�e�l�o�p�m�e�n�t� �o�f� �o�u�r� �p�r�o�d�u�c�t�s�,� �m�a�n�u�f�a�c�t�u�r�i�n�g� �m�e�t�h�o�d�s� �a�n�d� �r�e�s�o�u�r�c�e�s� �u�t�i�l�i �z�a�t�i�o�n�.
�E�n�s�u�r�i�n�g� �t�h�a�t� �o�u�r� �Q�u�a�l�i�t�y� �M�a�n�a�g�e�m�e�n�t� �S�y�s�t�e�m� �i�s� �i�n� �a�c�c�o�r�d�a�n�c�e� �w�i�t�h� �I�S�O� �9�0�0�1�:�2�0�0�8� �a�n�d� �m�e�a�s�u�r�i�n�g� �i�t�s� �e�f�f�e�c�t�i�v�e�n�e�s�s� �b�y� �c�o�n�d�u�c�t�i�n�g� �r�e�g�u�l�a�r� �I�n�t�e�r �n�a�l� �A�u�d�i�t�s� �a�n�d� �i�n� �M�o�n�t�h�l�y� �a�n�d� �Q�u�a�r �t�e�r�l�y� �R�e�v�i�e�w�s�.
�T�h�e� �r�e�s�p�o�n�s�i�b�i�l�i�t�y� �a�n�d� �a�c�c�o�u�n�t�a�b�i�l�i�t�y� �o�f� �q�u�a�l�i�t�y� �i�s� �s�h�a�r�e�d� �b�y� �a�l�l� �s�t�a�f�f� �a�n�d� �m�a�n�a�g�e�m�e�n�t� �a�n�d� �i�s� �a�d�o�p�t�e�d� �a�s� �a�n� �i�n�t�e�g�r�a�l� �p�a�r �t� �o�f� �e�v�e�r �y�d�a�y� �w�o�r�k� �w�h�i�c�h� �i�s� �g�e�a�r�e�d� �t�o�w�a�r�d�s� �t�r �u�e� �v�a�l�u�e� �c�r�e�a�t�i�o�n� �f�o�r� �a�l�l� �o�u�r� �s�t�a�k�e�h�o�l�d�e�r�s�.
�G�E�N�E�R�A�L� �M�A�N�A�G�E�R
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
– 6 –
CONTENTS
• AKR LOCK SYSTEM
STANDARD (Post / Vertical) 10
LEDGER (BEARER / HORIZONTAL) 11
INTERMEDIATE TRANSOMS 11
DECKING BEAM 12
INFILL BEAM 12
UNIVERSAL JACK 13
SOCKET BASE/HEAD PLATE 13
SPIGOT BASE PLATE 14
DROP HEAD 14
CONNECTOR 14
FIXED U-HEAD 14
SPIGOT U-HEAD 15
ADJUSTABLE BASE JACK 15
ADJUSTABLE U-HEAD JACK 15
BEAM BRACKET 16
SINGLE BOARD BRACKET 16
HOP UP BRACKET 16
CANTILEVER BEAM FRAME 17
CANTILEVER FRAME 17
SYSTEM ASSEMBLY 18-19
• AKR FORM WORK SYSTEM
SOLDIER 22
CORNER STRIPPING PIECE 22
CORNER PROFILE 23
CORNER SOLDIER 23
STEEL WALLER 23
LIFTING BRACKET 24
HANDRAIL POST 24
ACCESS BRACKET 24
DOUBLE PUSH PULL PROPS 24
SINGLE PUSH PULL PROPS 24
CLIMBING SYSTEM 25
• AKR PROPS & FRAME SYSTEM
ADJUSTABLE STEEL PROP JACK 28-29
H-FRAME (ITALIAN FRAME) W/O LADDER 30
H-FRAME (ITALIAN FRAME) W/LADDER 30
OPEN END FRAME (KOREAN FRAME) 31
OPEN END FRAME (KOREAN TYPE ITALIAN FRAME) 32
BRACING 32
CROSS BRACING 33
• AKR TUBES & COUPLERS
TOE BOARD COUPLER 36
SWIVEL COUPLER 36
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
– 7 –
* These products shall be applied in
collaboration with our partner kingdom excel
CONTENTS
DOUBLE COUPLER 37
GIRDER COUPLER 37
PUTLOG COUPLER (BEARER/SINGLE) 38
SLEEVE COUPLER (END TO END) 38
SCAFFOLDING TUBE 39
• AKR FORM WORK ACCESSORIES
WING NUT 40
WATER BARRIER W/PLASTIC CAPS 40
WASHER PLATE 40
TIE ROD 40
RAPID CLAMP 41
SHUTTERING CLAMP 41
UNIVERSAL CLAMP 41
• AKR COMPONENTS
TOP CUP 42
BOTTOM CUP 42
LEDGER BLADE 42
PROP SLEEVE W/NUT 43
JACK NUT 43
FLOWER PLATE 43
SNAP LOCK PIN 44
CASTOR WHEEL 44
METAL CUTTING DISC 44
• AKR WOODEN & ALUMINUM BEAMS
HT20plus TIMBER BEAM (KAUFMANN) 47
ALUMINUM BEAM 48
• AKR TIMBER PRODUCTS
TIMBER SCAFFOLD BOARD 51
MARBOA 51
PLY WOOD 51
• AKR SAFETY TOOLS
SCAFFOLDING SPANNER 52
SCAFFOLDING HAMMER & PODGER 52
MEASURING TAPE 52
HAZARD TAPE 53
SCAFFOLDING TAGS 53
SCAFFOLDING TOOL BELT 53
SAFETY GLOVES 54
SAFETY HARNESS BELT & LANYARD 54
SAFETY HELMET 54
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
– 8 –
AKRLOCK
SYSTEM
INTRODUCTION
Based on the CUPLOCK SYSTEM, which is the world's most widely used system, used both as a General Access Scaffolding System & a Vertical Load Bearing Scaffolding System. This system's key feature is its unique circular node point which allows up to 4 horizontal (Ledgers) to be connected to a vertical (Standard) in a single fastening action-making it the fastest and safest system available. There are no loose components to be put in place. Assembling and erecting this system is 75% faster than other conventional scaffolding systems.
The comprehensive range of AKR-LOCK components allows it to be used with traditional scaffold boards. It can be used to create a huge range of access and support structures (formwork), staircase towers, and circular scaffolds, loading towers, mobile towers, and more. The range of flexible uses this system provides, along with superior safety and strength, as suppose to conventional systems, are probably the reasons for its popularity of use across all types of businesses. These include but are not limited to, Construction, Industrial, Repair &Maintenance, Refineries, Ship Building, Public Access Solutions and more.
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
– 9 –
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
– 10 –
AKR LOCK SYSTEM
CORE COMPONENTS
AKR-LOCK STANDARD (POST/VERTICAL)
A Standard is made of High Quality Steel tube with Outer Diameter of 48 mm and Wall Thickness of 3.2 mm. Moreover, it has what are, the actual locking devices for med by loose/rotat ing Top Cups allowed to be moved over the fixed Bottom Cup that is welded in position. These two cups can fit up to four Ledger Blades and be locked by a single Scaffold Hammer blow to lock the Top Cup against the 8mm Steel Pin Welded above it for securing the lock. Connector can be used to attach another Standard on top of the existing one. The two Standards are then bolted together using an M10 Bolt & Nut to secure the standards in position. This option allows a stream of Standards to be erected vertically without a break in the constant 500 mm interval where the layers of Ledgers shall be locked in.
Finish Available : Painted.
Length (Meters)
3.00
2.80
2.50
2.30
2.00
1.80
1.50
1.30
1.00
Weight (Kilo Grams)
14.480
13.350
12.100
10.780
9.080
7.440
6.940
6.500
4.900
Product Code
AKR - LS-001
AKR - LS-002
AKR - LS-003
AKR - LS-004
AKR - LS-005
AKR - LS-006
AKR - LS-007
AKR - LS-008
AKR - LS-009
Standard Sizes
All AKR-LOCK Standard's are compliant to BS 1139 & EN 10219, 2this is as their average yield strength is 320N/mm .
Top Cup(Drop Forged)
Bottom Cup
50
05
00
50
05
00
50
08
0m
m
3.0
00
m
2.000m 2.500m 3.000m
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
– 11 –
AKR LOCK SYSTEM
AKR-LOCK LEDGER
(BEARER/HORIZONTAL)
A Ledger is made of High Quality Steel
tube with Outer Diameter of 48 mm and
Wall Thickness of 3.0 mm. Moreover, it has
forged blades welded at both ends,
making assembly quick as wel l as
a l l o w i n g c o m p o n e n t s t o b e
interchangeable. These are designed to
be located in the Bottom Cups on the
Standards and are secured by locking the
Top Cup.
Finish Available : Painted.Length (Meters)
2.50
2.00
1.80
1.60
1.30
1.20
1.00
0.90
0.60
Weight (Kilo Grams)
8.480
7.040
6.300
5.600
5.600
5.600
3.520
3.260
2.260
Product Code
AKR - LS-010
AKR - LS-011
AKR - LS-012
AKR - LS-013
AKR - LS-014
AKR - LS-015
AKR - LS-016
AKR - LS-017
AKR - LS-018
Ledger Sizes
Centre to Centre of Standard
1m
9252 mmOverall Length
ACCESS COMPONENTS
AKR-LOCK INTERMEDIATE
TRANSOMS
Intermediate Transoms are designed to
provide intermediary (midway) support for
Timber Scaffold Boards by spanning
between the inner and outer ledgers. The
jaw section at each end is welded
downwards to prevent dislodgment.
Finish Available : Painted.
Length
Provides extrasupport for boardsby resting on ledger
Length (Meters)
2.50
1.80
1.60
1.30
1.20
1.00
0.90
0.60
Weight (Kilo Grams)
9.540
7.180
6.520
5.860
5.440
4.780
4.300
3.790
Product Code
AKR - LS-019
AKR - LS-020
AKR - LS-021
AKR - LS-022
AKR - LS-023
AKR - LS-024
AKR - LS-025
AKR - LS-026
Intermediate Transom Sizes
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
– 12 –
AKR LOCK SYSTEM
AKR-LOCK DECKING BEAM
The Decking Beam are designed with wide
top flange thereby reducing maintenance
costs by increasing the lifespan of the
plywood. The decking beam are available
in all the standard sizes.
AKR-LOCK INFILL BEAM
Infill beam are used to provide the transom
suppor t underneath the plywood. All
standard sizes are manufactured, as well
as any special sizes up on request. They
Have a wide top which gives more support
for the plywood.
Length (Meters)
1.70
1.50
1.20
1.10
1.00
0.50
Weight (Kilo Grams)
8.660
7.770
6.360
6.130
5.200
3.720
Product Code
AKR - LS-030
AKR - LS-031
AKR - LS-032
AKR - LS-033
AKR - LS-034
AKR - LS-035
Infill Beam Sizes
Decking Beam Sizes
Length (Meters)
2.50
1.80
1.20
Weight (Kilo Grams)
24.540
16.300
10.880
Product Code
AKR - LS-027
AKR - LS-028
AKR - LS-029
Placed betweenthe decking
beams at90 degree angle
Length
Tongue of the dropheadis inserted in the slot of the decking beam
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
– 13 –
AKR LOCK SYSTEM
Adjustable Universal Jack Sizes
Length (MM)
760
660
Weight (Kilo Grams)
2.815
2.390
Product Code
AKR - LS-036
AKR - LS-037
Socket Base/Head Plate Sizes
Thickness (MM)
5
Weight (Kilo Grams)
1.150
Product Code
AKR - LS-038
AKR-LOCK UNIVERSAL JACK
A Universal Jack is made of High Quality
Steel Tube with 38 Outer Diameter and Wall
Thickness is of 4 mm. This tube is available
in lengths of 760 mm and 660 mm. Allowing
for extension of up to 520 mm and 420 mm
respectively. It has a forged Jack Nut
screwed on which helps accommodate
variations in ground levels and to level the
structure. These are used in conjunction
with Socket Base/Head Plates and Fixed U-
Head.
Finish Available : Galvanized.
AKR-LOCK SOCKET BASE/HEAD
PLATE
A Socket Base/Head Plate is used in
conjunction with the Universal Jack. The
dimensions of the plate are 150mm x 150
mm and the thicknesses available in 5 mm.
The plate has a 86 mm steel tube with 48
O u t e r D i a m e t e r a n d 3 . 2 m m Wa l l
Thickness welded in the center, this is
drilled to allow for the insertion of securing
bolt if required. The plate is punched with
holes to accept securing bolts when used
with other supplementary components and
also for spiking to sole boards.
Finish Available : Painted.
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
– 14 –
AKR LOCK SYSTEM
AKR-LOCK SPIGOT BASE PLATE
A Spigot Base Plate is used directly in
conjunction with a Standard, providing a
dull bearing surface for load distribution.
The dimensions of the plate are 150 mm x
150 mm and the thickness is available in 5
mm. The plate has a 100 mm steel tube with
25 Outer Diameter and 2 mm Wall Thickness
welded in the center, this is drilled to allow
for the insertion of securing bolt if required.
The plate is punched with holes to accept
securing bolts when used with other
supplementary components and also for
spiking to sole boards.
Finish Available : Painted.
Spigot Base Plate Sizes
Thickness (MM)
5
Weight (Kilo Grams)
0.510
Product Code
AKR - LS-039
M-Base Plate
M-CuplockStandard
Ø25/2mm
15
0
150 150
5
25
25
Ø9mm
25
25
Drop Head Sizes
Weight (Kilo Grams)
4.900
Product Code
AKR - LS-040
105
015
010150
21
4
Area / Thickness
150mm x 170mm / 8mm
150mm x 170mm / 6mm
Weight (Kilo Grams)
4.520
2.900
Product Code
AKR - LS-042
AKR - LS-043
Fixed U-Head Sizes
150 170AKR-LOCK FIXED U-HEAD
A Fixed U-Head is used in conjunction with a Universal Jack or a Standard &Connector to provide a wider area for light, medium or heavy-duty load bearing applications. This comes with loading surface area of 150 mm x 170 mm. The U-Head plate is available in two thicknesses of 6 mm and 8 mm.
Finish Available : Painted.
Connector Sizes
Weight (Kilo Grams)
0.820
Product Code
AKR - LS-041
AKR-LOCK DROP HEAD
The quick action drop head complete
supply with nuts & bolts that design to fit the
Standard props or adaptors for cuplocks
scaffolding. The drop heads at a hummer
stroke. The wedge is specially constructed
to endure the repeated strokes of the
hummer.
AKR-LOCK CONNECTOR
A connector is made of High Quality Square
tube with dimension of 30mm x 30mm and
Wall Thickness of 3.0mm. The length of a
connector is 300mm. This is so that it can be
used as an accessory that can be used to
attach a standard on top of the existing one.
The two Standards are then bolted using an
M10 Bolt & Nut to secure the standards in
position.
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
– 15 –
AKR LOCK SYSTEM
AKR-LOCK SPIGOT U-HEAD
A Spigot U-Head is used in conjunction with a Standard or an Adjustable Prop Jack to provide a wider area for light and medium-duty load bearing applications. This comes with surface area of 150 mm x 170 mm. The U-Head plate is made of Steel Sheet with 6 mm thickness.
Finish Available : Painted.
AKR-LOCK ADJUSTABLE U-HEAD
JACK
An Adjustable U-Head Jack is essentially
combin ing a Fixed U-Head wi th a
Universal Jack. This comes with loading
surface area which is of 150mm x 170mm.
The U-Head plate is available in two
thicknesses of 6mm and 8mm. A U-Head
plate is welded to a Steel Tube with 38
Outer Diameter and Wall Thickness of
4mm. This tube is available in lengths of
760mm and 660mm. A l lowing fo r
extension of up to 520mm and 420mm
respectively. It has a forged Jack Nut
screwed on which helps accommodate
variations in the overhead lift levels.
Finish Available : Galvanized/Painted.
Spigot U-Head Sizes
Thickness (MM)
8
6
Weight (Kilo Grams)
0.620
0.510
Product Code
AKR - LS-044
AKR - LS-045
510 170
Area / Thickness
150mm x 170mm / 8mm
150mm x 170mm / 6mm
Weight (Kilo Grams)
5.780
4.870
Product Code
AKR - LS-048
AKR - LS-049
Adjustable U-Head Jack Sizes
AKR-LOCK ADJUSTABLE BASE
JACK
An Adjustable Base Jack is essentially a
combining Socket Base/Head Plate with
a Universal Jack. Where a plate, of
150mm x 150mm area and available
thicknesses of 5mm, is welded to a Steel
Tube with 38 Outer Diameter and Wall
Thickness of 4mm. This tube is available
i n l e n g t h s o f 7 6 0 m m a n d 6 6 0 m m .
Allowing for extension of up to 520mm
and 420mm respectively. It has a forged
Jack Nut screwed on which he lps
accommodate variations in ground levels
and to level the structure.
Finish Available : Galvanized/Painted.Length / Thickness
760mm / 5mm
660mm / 5mm
Weight (Kilo Grams)
3.580
3.280
Product Code
AKR - LS-046
AKR - LS-047
Adjustable Base Jack Sizes
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
– 16 –
AKR LOCK SYSTEM
AKR-LOCK BEAM BRACKET
A Beam Bracket is specially used to
eliminate the need for full height propping
under Drop Beams and i ts primary
purpose is to support the framework for
them. The bracket has two Ledger Blades
welded at an extended length of 155 mm
along a 1500 mm Steel Tube. The
positioning of the Ledger Blades are not
asymmetrical, this is so it can be used
either way up to provide additional
f lexibili ty in adjustment to propping
height.
Finish Available : Painted.
AKR-LOCK SINGLE BOARD BRACKET
A Single Board Bracket locates in the cup joint and provides support for a single board at a vertical. It replaces the inside board transom at that point. It is especially useful where scaffolds cannot be located directly adjacent to the work face.
Finish Available : Painted.
AKR-LOCK HOP UP BRACKET
The Hop Up Bracket locates in the cup
joint and is designed to increase the
overall width of the working platform. It is
manufactured in two sizes for supporting
two and three additional boards beyond
t h e i n n e r f a c e o f t h e s c a f f o l d . I t
incorporates a cup joint at the outer end to
allow the fitting of an inside ledger and a
socket to support a handrail post.
Finish Available : Painted.
15
00
M.
Beam Bracket Size
Length
1500mm
2000mm
Weight (Kilo Grams)
6.50
7.36
Product Code
AKR - LS-050
AKR - LS-051
Single Board Bracket Size
Length
1 Board (22.5 cm)
Weight (Kilo Grams)
1.25
Product Code
AKR - LS-052
Hop Up Bracket Sizes
Length
2 Boards (22.5 cm x 2)
3 Boards (22.5 cm x 3)
Weight (Kilo Grams)
5.40
6.75
Product Code
AKR - LS-053
AKR - LS-054
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
– 17 –
1.2m
L
Cantilever Frame Sizes
Length
1,000mm Depth
1,500mm Depth
Weight (Kilo Grams)
15.250
17.600
Product Code
AKR - LS-057
AKR - LS-058
Cantilever Beam Frame Sizes
Length
1,000mm Depth
1,500mm Depth
Weight (Kilo Grams)
15.250
13.700
Product Code
AKR - LS-055
AKR - LS-056
AKR LOCK SYSTEM
AKR-LOCK CANTILEVER BEAM
FRAME
A Cantilever Beam Frame is used for
supporting decking or formwork at the
edge of the slabs. The frames have blade
ends for locating the cup joints and can
accept jacks. These are available in two
designs, one that is 1000 mm deep and the
other that is 1500 mm deep.
Finish Available : Painted.
AKR-LOCK CANTILEVER FRAME
Similar to Cantilever Beam Frame a
Cantilever Frame is also used to provide
ex t ra suppor t beyond the edge o f
cons t r uc t ion , espec ia l l y s lab edge
formwork. The Cantilever Frame is locked
directly to the Standard at the locking
points. The sockets on these frames can
be used in conjunction with Universal
Jacks & Adjustable U-Head Jacks. It
provides an extension at three possible
lengths of 1,200 mm, 1,250 mm and 1,300
mm. These are available in two designs,
one that is 1000 mm deep and the other
that is 1500 mm deep.
Finish Available : Painted.
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
1.5
M. D
EE
P1
.0M
. D
EE
P
– 18 –
AKR LOCK SYSTEM ASSEMBLY
AKR - VERTICAL (STANDARDS)
Standards are manufactured from 48.3mm
OD steel tubes with different housing sets
at certain intervals. Standards are made
available in open ended version, or with
welded spigot. Standard tubes of mild
steel confirm to BS 1139 supplied painted
and galvanized finish.
AKR - BASE JACK & UNIVERSAL
JACK
The 57 kN capacity galvanized jack has an
adjustment range of over 45cm. it is
m a n u f a c t u r e d f r o m 3 8 m m o u t s i d e
diameter steel tubes with a rolled / cut
thread. The jack can be used either at top
or the bottom of the vertical (standard) so
the reasonable portion of the jack will
always remain inside the vertical for safety.
50
40
30
20
10
000.50 0.75 1.00 1.25 1.50 1.75 2.00 2.25 2.50
Unbraced Length of Standard (m)
Maximum Permissable Loading on Standard
Tubular Jack Loading Data
50
40
30
20
10
00100 200 300 400 500
Jack Extension (mm)
1. Base Jack
2. Standard
3. Ledger
4. Universal Jack
5. Adaptor
6. Drop Head
7. Decking Beam
8. Infill Beam
9. 18mm Plywood
1
3
2
4
56
7
89
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
– 19 –
Horizontals S.W.L
Ledger Size (m)
Ledger 2.5
Ledger 1.8
Ledger 1.6
Ledger 1.3
Ledger 1.2
Ledger 1
Ledger 0.9
Ledger 2.5
Central Point Load (kN)
1.71
3.40
3.52
3.70
4.80
4.80
4.80
4.80
U.D.LLoad (kN)
2.70
-
-
-
-
-
-
-
Two Equally SpacePoint Load (kN)
1.29 (each)
-
-
-
-
-
-
-
Uniformly Distributed Load
Central Point Load
Two Equally Space Point Load
1.0 m 1.3 m 1.6 m 1.8 m
1.2 m 1.8 m 2.5 m
1.8 1.8 1.8 1.8
1.0
m s
td
1.0
m s
td2
.5m
std
0.2
84
.25
m
DROPHEAD, ADAPTOR& UNIVERSAL JACK
INFILL BEAM @50 CM C/CWITH 18MM MARINE PLYWOOD
DECKING BEAMADJUSTABLE FORKHEAD WITHPRIMARY & SECONDARY TIMER
BRACING TUBE LEDGER BASE JACK STANDARD PROP JACK
CANTILEVERBEAM FRAME
1.6 1.0 1.0
1.0
m s
td2
.5m
std
0.2
84
.25
m
DROPHEAD, ADAPTOR& UNIVERSAL JACK
INFILL BEAM @50 CM C/CWITH 18MM MARINE PLYWOOD
ADJUSTABLE FORKHEAD WITHPRIMARY & SECONDARY TIMER
BRACING TUBE LEDGER BASE JACK STANDARD
1.0
m s
td2
.5m
std
PROP JACK
1.6
1.0
m s
td2
.5m
std
Decking BeamSize (m)
2.5
2.5
2.5
1.8
2.5
1.8
2.5
2.5
1.8
2.5
1.8
1.2
2.5
1.8
1.2
1.8
1.8
1.2
2.5
1.8
1.2
1.2
1.2
1.8
1.2
1.2
1.2
LedgerSize (m)
1.8
1.6
1.3
1.8
1.2
1.6
1.1
1.0
1.3
0.9
1.2
1.8
0.8
1.1
1.6
1.0
0.9
1.3
0.6
0.8
1.2
1.1
1.0
0.6
0.9
0.8
0.6
Area2(m)
4.50
4.00
3.25
3.24
3.00
2.88
2.75
2.50
2.34
2.25
2.16
2.16
2.00
1.98
1.92
1.80
1.62
1.55
1.50
1.44
1.44
1.32
1.20
1.08
1.08
0.95
0.72
Max. Slab Thickness (cm)Solid Slab Hollow Slab
27.5
32.0
41.2
41.2
45.3
47.5
50.2
56.0
60.4
63.1
66.1
66.1
72.0
72.8
75.3
80.9
90.8
94.6
98.7
103.1
103.1
113.2
125.3
140.1
140.1
158.7
214.2
34.4
40.0
51.5
51.7
56.7
59.4
62.7
70.0
75.5
78.9
82.6
82.6
90.0
91.0
94.2
101.1
113.4
118.2
123.3
128.9
128.9
141.5
156.7
175.2
175.2
198.3
267.8
GRID LOADS
3Concreate Unit Weight (Solid) = 2500 Kg/m3Concreate Unit Weight (Hollow) = 2000 Kg/m2Live Load = 200 Kg/m
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
– 20 –
AKRFORMWORK
SYSTEM
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
– 21 –
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
AKR FORM WORK SYSTEM
– 22 –
SOLDIER
Soldier system designed to cover wide range of construction and to with the high pressure exerted while pouring cocrete retaining wall, bridges & coloums. The soldier which are produced in many lenghtscan be assembled in combination to suit any heights of pouring.
CORNER STRIPPING PIECE
It is used to support the shutter from the inside face of the wall corner. It consist of an right angle bend sheet two square tube & required number of thread rod & wing nut. While assembling the plywood of the shutter is placed between the bend sheet & squire tube.
N Lock Soldier
Soldier 3.6mtr (2.8mm)
Soldier 3.0mtr (2.8mm)
Soldier 2.7mtr (2.8mm)
Soldier 1.8mtr (2.8mm)
Soldier 1.2mtr (2.8mm)
Soldier 0.9mtr (2.8mm)
Weight (Kilo Grams)
63.720
53.860
48.650
33.540
25.360
18.450
Product Code
AKR - FWS-059
AKR - FWS-060
AKR - FWS-061
AKR - FWS-062
AKR - FWS-063
AKR - FWS-064
Next Corner Stripping Piece
Next Corner Stripping 3.6mtr
Next Corner Stripping 3.0mtr
Next Corner Stripping 2.7mtr
Next Corner Stripping 1.8mtr
Next Corner Stripping 1.2mtr
Next Corner Stripping 0.9mtr
Weight (Kilo Grams)
64.000
53.000
48.000
32.800
23.650
17.300
Product Code
AKR - FWS-065
AKR - FWS-066
AKR - FWS-067
AKR - FWS-068
AKR - FWS-069
AKR - FWS-070
Soldier Specification
Corner Stripping Piece Specification
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
– 23 –
AKR FORM WORK SYSTEM
STEEL WALLER
It is a twin 100 x 50 mm channel section.
Designed to make formwork elements using standard size plywood sheets. Simply, positive connections 110kN tie load capacity.
Weight : 22kg/m
CORNER PROFILE
It is used to support the shutter at the corner. Two corner profile of different shutter are tied together using tie bar & wing nut. The aluminum beams are fitted to the profile using universal clamp. The corner profile consist of a right angled bend sheet with holes at specif ied intervals.
CORNER SOLDIER
Designed to be used in conjuction with s tandard so ld ier, they s impl i fy the construction of corners. By allowing ties to pass through in both direction, each corner soldier replace two standards soldiers. They permit the tie to be closer to the corner which in turn reduce the loading on external corner.
Steel Waller
Steel Waller 5.5mtr
Steel Waller 4.5mtr
Steel Waller 4.0mtr
Steel Waller 3.0mtr
Steel Waller 2.0mtr
Weight (Kilo Grams)
124.69
102.02
090.68
168.01
045.34
Product Code
AKR - FWS-083
AKR - FWS-084
AKR - FWS-085
AKR - FWS-086
AKR - FWS-087
Corner Profile
Corner Profile 3.6mtr
Corner Profile 3.0mtr
Corner Profile 2.7mtr
Corner Profile 1.8mtr
Corner Profile 1.2mtr
Corner Profile 0.9mtr
Weight (Kilo Grams)
27.800
23.200
20.900
13.900
09.300
06.900
Product Code
AKR - FWS-071
AKR - FWS-072
AKR - FWS-073
AKR - FWS-074
AKR - FWS-075
AKR - FWS-076
Corner Soldier
Corner Soldier 3.6mtr
Corner Soldier 3.0mtr
Corner Soldier 2.7mtr
Corner Soldier 1.8mtr
Corner Soldier 1.2mtr
Corner Soldier 0.9mtr
Weight (Kilo Grams)
73.900
62.000
56.000
38.200
25.600
19.650
Product Code
AKR - FWS-077
AKR - FWS-078
AKR - FWS-079
AKR - FWS-080
AKR - FWS-081
AKR - FWS-082
Corner Profile Specification
Corner Soldier Specification
Steel Waller Specification
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
AKR FORM WORK SYSTEM
– 24 –
HANDRAIL POST
It is used to hold the hand rails of 48.3 scaffold tube. The hand rail post is fitted in to the socket of the Access bracket and is fastened using M16 x 75mm bolt and nut.
DOUBLE PUSH PULL PROPS
It is used to support the shutter and is fitted at the back face of the steel soldier. It consist of an outer & inner pipe, sleeve, two nuts, locking pin and base adaptor.
ACCESS BRACKET
Access bracket support three standard steel plank a toe board which provide a safe working platform. The bracket has a vertical pipe for fixing the hand rail post & a horizontal channel designer to carry timber or steel plank.
LIFTING BRACKET
It is used to provide lifting position for handling by crane. Usually two bracket are provide per shutter. They are secured at the top of the solider using four M16 x 35mm bolts and nuts.
SINGLE PUSH PULL PROPS
Used to support the shutter and is fitted at the back face of the steel soldier. It consist of an outer & inner pipe, sleeve, two nuts, locking pin and base adaptor.
Single Push Pull Props (HD)
Single Push Pull Props 6mtr (3.2mm)
Single Push Pull Props 5mtr (3.2mm)
Single Push Pull Props 4mtr (3.2mm)
Single Push Pull Props 3mtr (3.2mm)
Single Push Pull Props 2mtr (3.2mm)
Weight (Kilo Grams)
27.780
21.780
19.920
16.000
12.170
Product Code
AKR - FWS-090
AKR - FWS-091
AKR - FWS-092
AKR - FWS-093
AKR - FWS-094
Double Push Pull Props (HD)
Double Push Pull Props 6/3mtr
Double Push Pull Props 4/2mtr
Weight (Kilo Grams)
43.780
32.030
Product Code
AKR - FWS-088
AKR - FWS-089
Double Push Pull Props Specificat ion
Single Push Pull Props Specificat ion
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
– 25 –
AKR FORM WORK SYSTEM
Pushpull CornerAngle
Double Pushpull Shoe
Pushpull Swivel Base Plate
Shoring BaseAdaptor
Soldier FloorBracket
Soldier ShoringBase
CLIMBING SYSTEM
Next Climbing system bracket can be used with either modular form work systems or purpose
made forms, which cover many construction applications. It allows fine adjustment of the form
panels vertically and horizontally to ensure accurate alignment of formwork surface.
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
Set Connected to Soldier
Internal Climbing Bracket Head
Recess at Concrete Wall
– 26 –
AKR PROPS
& FRAME
SYSTEM
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
– 27 –
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
– 28 –
AKR PROPS
ADJUSTABLE STEEL PROP (PROP JACK)
A n A d j u s t a b l e S t e e l P r o p i s a compression member normally used as t e m p o r a r y v e r t i c a l s u p p o r t i n construction works. A prop consists of two tubes which are telescopically displaceable within each other. The outer steel tube is of 60.30 mm Outer Diameter and the inner steel tube is of 48.30 mm outer diameter. A prop has a coarse adjustment with a pin inserted into holes in the inner tube and a means of fine adjustment using a threaded collar. Note: The forces f rom the endplate are transferred to the pin inserted in the inner tube holes and to the collar nut which transfers the forces to the outer tube thread.
The prop extension is called "fully open" if the pin is in the hole farthest away from the inner tube endplate and the collar nut is in the uppermost position. The prop extension is called "fully closed" if the pin is in the hole nearest the inner tube endplate and the collar nut is in the lowest position.
Prop Jack HD Specification
Length (Meters)
4.50 MTR
4.00 MTR
3.50 MTR
3.00 MTR
2.50 MTR
2.00 MTR
Thickness (MM)
3.20 MM
3.20 MM
3.20 MM
3.20 MM
3.20 MM
3.20 MM
Weight (Kilo Grams)
18.700
17.600
15.360
14.220
13.100
11.940
Product Code
AKR - FWS-095
AKR - FWS-096
AKR - FWS-097
AKR - FWS-098
AKR - FWS-099
AKR - FWS-100
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
– 29 –
Prop Jack LD Specification
Length (Meters)
4.00 MTR
3.50 MTR
3.00 MTR
2.50 MTR
2.00 MTR
Thickness (MM)
2.00 MM
2.00 MM
2.00 MM
2.00 MM
2.00 MM
Weight (Kilo Grams)
12.060
11.100
9.980
8.500
7.320
Product Code
AKR - FWS-101
AKR - FWS-102
AKR - FWS-103
AKR - FWS-104
AKR - FWS-105
Prop Sleeve Nut
Prop Sleeve
6 mm Pin
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
AKR PROPS
CUSTO MIZED PROPS
We manufacture Prop Jacks as per
customers specification as well.
– 30 –
AKR FRAME SYSTEM
H-Frame with Ladder (Italian Frame) Specification
Product Code
Description
Dimensions
Tube Outer Diameter
Thickness of Tube
Braces Supplied
Brace Tube Outer Diameter
Thickness of Tube
Weight of Set
AKR - FS-107
H Frame w/Ladder
L 2m x W 0.70m
48.30 mm
2 mm
2 Horizontal
1 Diagonal
25.00 mm
2 mm
14.50 Kg
H-FRAME (ITALIAN FRAME) W/O LADDER
An Italian H Frame is made with the Highest Quality Steel Tube of outer diameter 48.30 mm. There are various sizes available to accommodate the needs of customers. Each frame has four Snap Lock Pins welded on for the fixing of Horizontal & Diagonal Braces. Due to the variation of these frames available in the market. This is an item, which can be highly customized, to fit the existing of a client. This item is available in two designs, one with ladder and another without. The Frames are connected vertically by placing one on top of the other. The socket welded on each frame allows this to happen.
Finish Available : Painted.
Items which can be used with this Frame :* Base Jack or Castor Wheel* Wooden Plank* Bracing Tube* Couplers (Double Coupler/Swivel Coupler)
H-Frame without Ladder (Italian Frame) Specification
Product Code
Description
Dimensions
Tube Outer Diameter
Thickness of Tube
Braces Supplied
Brace Tube Outer Diameter
Thickness of Tube
Weight of Set
AKR - FS-106
H Frame w/o Ladder
L 2m x W 0.70m
48.30 mm
2 mm
2 Horizontal
1 Diagonal
25.00 mm
2 mm
12.30 Kg
H-FRAME (ITALIAN FRAME) W/LADDER
An Italian H Frame is made with the Highest Quality Steel Tube of outer diameter 48.30 mm. There are various sizes available to accommodate the needs of customers. Each frame has four Snap Lock Pins welded on for the fixing of Horizontal & Diagonal Braces. Due to the variation of these frames available in the market. This is an item, which can be highly customized, to fit the existing of a client. This item is available in two designs, one with ladder and another without. The Frames are connected vertically by placing one on top of the other. The socket welded on each frame allows this to happen.
Finish Available : Painted.
Items which can be used with this Frame :* Base Jack or Castor Wheel* Wooden Plank* Bracing Tube* Couplers (Double Coupler/Swivel Coupler)
Maine FrameAll the dimensions in "MM"
Maine FrameAll the dimensions in "MM"
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
AKR FRAME SYSTEM
– 31 –
OPEN END FRAME(KOREAN FRAME)
An Open End Frame is made with the highest quality steel tube of outer diameter 42.00 mm. There are var ious sizes available to accommodate the needs of customers. Each frame has four Snap Lock Pins welded on for the fixing of Horizontal & Diagonal Braces for medium duty version and Cross Braces for the light duty version. Due to the variation of these frames available in the market. This is an item, which can be highly customized, to fit the existing of a client. This item is available in two sizes. The medium duty Open End Frame is erected in the same manner as the H Frame, however the light duty Open End Frame is erected by the used of Joint Pins designed specially for this system to secure the connecting of one frame to another.
Requirements :
A scaffold must be erected, altered, and dismantled by qualified works or under the direct supervision of a qualified person. The qualified person must ensure that the erection is carried out according to acceptable practices in compliance with any drawings and the manufacturer or supplier's instructions, and that the correct components and materials are being used.
All equipment must be inspected before use to ensure that it is in good repair and suitable for the intended use.
The base must be firm and level enough to support the load of scaffolding, workers, and materials. Sills and base plates are required on any soil or unstable ground c o n d i t i o n , o r w h e r e a n y l e v e l i n g adjustment is needed. The sill must be sound, rigid, and capable of supporting the maximum loads without settlement or deformation.
Adjustable base plates must be adjusted w i t h i n t h e l i m i t s s p e c i f i e d b y t h e manufacturer or supplier.
With a rolling scaffold or free-standing tower, the platform height must not exceed three times its smallest base dimension (3 to 1 rule).
Finish Available : Painted.
Items which can be used with both of the Frame :* Base Jack or Castor Wheel* Wooden Plank* Bracing Tube* Couplers (Double Coupler/Swivel Coupler)
Open End Frame Specification
Product Code
Description
Dimensions
Tube Outer Diameter
Thickness of Tube
Braces Supplied
Brace Tube Outer Diameter
Thickness of Tube
Weight of Set
AFK - FS-109
Open End Frame (H)
1.7m x W 0.7m
42 mm
2 mm
1 Cross Brace
25.00 mm
2 mm
9 Kg
Maine FrameAll the dimensions in "MM"
Maine FrameAll the dimensions in "MM"Open End Frame Specification
Product Code
Description
Dimensions
Tube Outer Diameter
Thickness of Tube
Braces Supplied
Brace Tube Outer Diameter
Thickness of Tube
Weight of Set
AKR - FS-108
Open End Frame (H)
1.7m x W 1.2m
42 mm
2 mm
1 Cross Brace
25.00 mm
2 mm
11 Kg
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
AKR FRAME SYSTEM
– 32 –
OPEN END FRAME (KOREAN TYPE ITALIAN FRAME)
An Open End Frame is made with the highest quality steel tube of outer diameter 48.30 mm for medium duty version. There a r e v a r i o u s s i z e s a v a i l a b l e t o accommodate the needs of customers. Each frame has four Snap Lock Pins welded on for the fixing of Horizontal & Diagonal Braces for medium duty version and Cross Braces for the light duty version. Due to the variation of these frames available in the market. This is an item, which can be highly customized, to fit the existing of a client. This item is available in two sizes. The medium duty Open End Frame is erected in the same manner as the H Frame, however the light duty Open End Frame is erected by the used of Joint Pins designed specially for this system to secure the connecting of one frame to another.
Requirements :
A scaffold must be erected, altered, and dismantled by qualified works or under the direct supervision of a qualified person. The qualified person must ensure that the erection is carried out according to acceptable practices in compliance with any drawings and the manufacturer or supplier's instructions, and that the correct components and materials are being used.
All equipment must be inspected before use to ensure that it is in good repair and suitable for the intended use.
The base must be firm and level enough to support the load of scaffolding, workers, and materials. Sills and base plates are required on any soil or unstable ground c o n d i t i o n , o r w h e r e a n y l e v e l i n g adjustment is needed. The sill must be sound, rigid, and capable of supporting the maximum loads without settlement or deformation.
Adjustable base plates must be adjusted w i t h i n t h e l i m i t s s p e c i f i e d b y t h e manufacturer or supplier.
With a rolling scaffold or free-standing tower, the platform height must not exceed three times its smallest base dimension (3 to 1 rule).
Maine FrameAll the dimensions in "MM"
Bracing Specification
Thickness
2.0 mm
2.0 mm
Size
2500 mm
2865 mm
Product Code
AKR - FS-111
AKR - FS-112
* CUSTOM SIZES AVAILABLE ON CLIENT REQUEST.
Open End Frame Specification
Product Code
Description
Dimensions
Tube Outer Diameter
Thickness of Tube
Braces Supplied
Brace Tube Outer Diameter
Thickness of Tube
Weight of Set
AKR - FS-110
Open End Frame (M)
L 2m x W 0.7m
48.30 mm
2 mm
2 Horizontal
1 Diagonal
25.00 mm
2 mm
13.60 kg
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
AKR FRAME SYSTEM
– 33 –
Maine FrameAll the dimensions in "MM"
Cross Bracing Specification
Thickness
2.0 mm
2.0 mm
Size
2200 mm
1870 mm
Product Code
AKR - FS-114
AKR - FS-115
Open End Frame Specification
Product Code
Description
Dimensions
Tube Outer Diameter
Thickness of Tube
Braces Supplied
Brace Tube Outer Diameter
Thickness of Tube
Weight of Set
AKR - FS-113
Open End Frame (M)
L 2.0m x W 1.0m
48.30 mm
2 mm
2 Horizontal
1 Diagonal
25.00 mm
2 mm
14.400 kg
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
– 34 –
AKR TUBES
COUPLERSFORMWORK
ACCESSORIES& COMPONENTS
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
– 35–
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
– 36 –
AKR COUPLERS
Product Code
Manufactured by
Weight
AKR - CC-117
Drop Forging
1.050 kg
AKR - CC-118
Sheet Metal Pressing
1.02 kg
Swivel Coupler Specification
TOE BOARD COUPLER
(BOARD RETAINING
COUPLER/BRC CLAMP)
A Toe Board Coupler is used to retain
Timber Scaffold Boards of planks with
thickness ranging from 35 mm to 38 mm.
This ensures that scaffold boards are held
tightly in position as load is being applied
on it. It works by being installed on a
Intermediate Transom or Ledger under the
Timber Scaffold Boards.
Product Code
Manufactured by
Weight
AKR - CC-116
Sheet Metal Pressing
0.66 kg
Toe Board Coupler Specification
SWIVEL COUPLER (ADJUSTABLE
COUPLER/FLEXIBLE COUPLER)
A Swivel Coupler joins steel tubes with
Outer Diameter of 48 mm. Each half of the
coupler is interconnected with a swivel
pin. It is typically used with Scaffolding
Tubes to connect bracing members and
are also used for tension splicing of
scaffolds tubes. It consists of replaceable
'T' bolts, nuts and washers. This type of
coupler is available in Drop Forged and
Pressed Sheet Metal. The Drop Forged
couplers are EN74 Class A tested and
have a minimum Safe Working Load of 5.30
kN.
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
– 37 –
AKR COUPLERS
DOUBLE COUPLER
(RIGHT ANGLE COUPLER/LOAD
BEARING COUPLER/FIXED
COUPLER)
A Double Coupler joins steel tubes with
Outer Diameter of 48 mm, strictly at right
angles. It is typically used with Scaffolding
Tubes to connect bracing members, but
more especially it is the core component of
the Tube & Coupler System. It consists of
replaceable 'T' bolts, nuts and washers.
This type of coupler is available in Drop
Forged and Pressed Sheet Metal. The
Drop Forged couplers are EN74 Class A
tested and have a minimum Safe Working
Load of 6.25kN.
GIRDER COUPLER
(GRAVE LOCK COUPLER/BEAM
CLAMP)
A Girder Coupler is used for connecting a
scaffold tube to a steel wide-flange beam
(I-beam). Girder couplers are used in
pairs and connected along a single
scaffolding tube on both sides of the beam.
The tube supported is 48 mm outer
diameter and the depth of beam supported
is 43 mm (1¾"). It is available in two types
drop forged and pressed sheet metal.
Product Code
Manufactured by
Weight
AKR - CC-121
Drop Forging
1.425 kg
Girder Coupler Specification
Product Code
Manufactured by
Weight
AKR - CC-119
Drop Forging
950 GM
AKR - CC-120
Sheet Metal Pressing
0.91 kg
Double Coupler Specification
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
– 38 –
AKR COUPLERS
Product Code
Manufactured by
Weight
AKR - CC-123
Sheet Metal Pressing
1.13 kg
Sleeve Coupler Specification
PUTLOG COUPLER(BEARER/SINGLE)
A Putlog Coupler is used for fixing a
bearer (transom or putlog) to a runner
(ledger), or to connect a scaffolding tube
used only as a guardrail to a Standard. It is
not a load bearing coupler.It is available in
two types drop forged and pressed sheet
metal.
Product Code
Manufactured by
Weight
AKR - CC-122
Drop Forging
0.685 kg
Putlog Coupler Specification
SLEEVE COUPLER (END TO END)
A Sleeve Coupler is a one-piece heavy
duty coupler for rapidly fixing externally
joining two scaffolding tubes co-axially
end to end. It features a steel divider in the
center to ensure equal insertion of each
tube and unique individual one side
unlocking safety feature.
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
AKR TUBES
– 39 –
SCAFFOLDING TUBE
A Scaffolding Tube is the core component
of the conventional Tube & Coupler
scaffolding system. It is made of High
Quality Steel in compliance with EN 10219
& BS 1139. It is 6000mm in length and has
an Outer Diameter of 48 mm along with a
Wall Thickness of 3.2 mm. These tubes
can also be used to brace erected
sca f fo lds such as towers , suppor t
formwork structures and more. For this
application they need to be used with AKR-
COUPLERS. They can be purchased and
cut on site as per specific need or can be
requested to be pre-cut in the factory as
per request.
Finish Available : Galvanized/Painted.
Scaffolding Tube Specification
Type
Painted
Galvanized
Length
6000 mm
6000 mm
Product Code
AKR - ST-124
AKR - ST-125
* CUSTOM SIZE AVAILABLE ON CLIENT REQUEST.
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
TIE BAR SYSTEM WING NUT
A knock-on Wing Nut is used in conjunction with
the Waller Plates for securing the Tie Rods in
formwork applications. Wing Nuts are a typical
component of the Tie Bar System and are
suitable for both timber and steel formwork.
Finish available : Anti-Rust Plating
WATER BARRIER W/ PLASTIC CAPS
A Water Stopper is cast into the concrete wall
between two tie bars, these allow through tie
sys tems to be used in water re ta in ing
structures. Water stoppers are made from high
quality casting and have Plastic Caps at both
ends. The special feature is an additional
surrounding disc for better anchoring and
further security against penetrating water.
Finish available : Galvanized
Water Barrier W/Plastic Caps Specification
Length
116 mm
Weight (Kilo Grams)
0.5 kg
Product Code
AKR - TBS-127
Wing Nut Specification
Working Load
90 kN
Weight (Kilo Grams)
0.32
Product Code
AKR - TBS-126
– 40 –
Length
6.00 m
3.00 m
2.00 m
1.50 m
1.00 m
0.75 m
Weight (Kilo Grams)
8.82 kg
4.41 kg
2.94 kg
2.21 kg
1.47 kg
1.10 kg
Product Code
AKR - TBS-131
AKR - TBS-132
AKR - TBS-133
AKR - TBS-134
AKR - TBS-135
AKR - TBS-136
Tie Rod Specification
WASHER PLATE
A Washer Platehas a reinforced design, made
from steel. Washer Plates are of square
dimensions of 120x120mm, with an opening
hole to pass through tie rods. These are also
used with Tie Rods and Wing Nuts for both
timber and steel formwork. It is available in
various strengths determined by the thickness
of the plate.
Finish available : Galvanized
TIE ROD
A Tie Rod is a continuous threaded rod,
specifically designed and manufactured for use
as formwork tie rods for all types of concrete
structures. These are available in various cut
length sizes. It has a diameter of 15 mm.
Washer Plate Specification
Dimension
120mm x 120mm
120mm x 120mm
120mm x 120mm
Thickness
4.5 mm
6 mm
8 mm
Product Code
AKR - TBS-128
AKR - TBS-129
AKR - TBS-130
AKR FORMWORK ACCESSORIES
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
AKR FORMWORK ACCESSORIES
RAPID CLAMP
Finish available: Galvanized or Painted.
Rapid Clamp Specification
Dimension
Ø 4-10mm
Ø 7-12mm
Ø 4-10mm
Ø 7-12mm
Weight (Kilo Grams)
0.380 kg
0.490 kg
0.400 kg
0.520 kg
Finish
Painted
Painted
Galvanized
Galvanized
Made in
India
India
Italy
Italy
Product Code
AKR - FWA-137
AKR - FWA-138
AKR - FWA-139
AKR - FWA-140
SHUTTERING CLAMP
Finish available : Natural/Black
Universal Clamp Specification
Dimension
Standard
Weight (Kilo Grams)
0.48 kg
Made in
K.S.A / U.A.E
Product Code
AKR - FWA-144
UNIVERSAL CLAMP
Our Universal Clamp is manufactured from top
grade mild MS sheets in accordance with
international quality standards. These clamps
are equipped with high tensile carriage bolts.
These Universal Clamps are known for their
precision designs, high efficiency and wide
functionality.
Finish available : Galvanized
Shuttering Clamp Specification
Dimension (LxWxT)
0.70M x 2Cm x 8mm
0.80M x 2Cm x 8mm
1.00M x 2Cm x 8mm
Weight (Kilo Grams)
1.30 kg
1.50 kg
1.90 kg
Made in
K.S.A / U.A.E
K.S.A / U.A.E
K.S.A / U.A.E
Product Code
AKR - FWA-141
AKR - FWA-142
AKR - FWA-143
– 41 –
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
AKR COMPONENT
BOTTOM CUP
A Bot tom Cup is a component for
Standards
– 42 –
LEDGER BLADE
A Ledger Blade is a component for
Ledgers.
Scaffold Spanner Specification
Description
Ledger Blade (Drop Forged)
Product Code
AKR - CC-147
TOP CUP
Top Cup Specification
Feature
Forged, Casted
Product Code
AKR - CC-145
Bottom Cup Specification
Description
Bottom Cup (Sheet Pressed)
Product Code
AKR - CC-146
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
AKR COMPONENT
– 43 –
PROP SLEEVE W/ NUT
A Prop Sleeve with Nut is a component for
Props. The sleeve is made from a 60 mm
ou te r d iameter tube th readed and
punched for a slot. A casted/forged nut is
then screwed to complete the set.
Prop Sleeve with Nut Specification
Description
Prop Sleeve W/Nut (Casted)
Product Code
AKR - CC-148
JACK NUT
A Jack Nut is a component for al l
adjustable jacks.
Jack Nut Specification
Description
Jack Nut (Drop Forged)
Product Code
AKR - CC-149
FLOWER PLATE
A Flower Plate is a component for
Adjustable Props.
Flower Plate Specification
Description
Flower Plate
Product Code
AKR - ACS-150
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
AKR ACCESSORIES
– 44 –
Snap Lock Pin Specification
Description
Snap Lock Pin
Snap Lock Pin
Product Code
AKR - ACS-151
AKR - ACS-152
SNAP LOCK PIN
Size
12 mm
16 mm
ACCESSORIES CASTOR WHEEL
A Castor Wheel can be used with AKR-
LOCK SYSTEM to form a mobile scaffold
tower. The spigot of the Castor Wheel fits
at the bottom of the Standard and is
secured with a hexagonal head bolt. It is
equipped with locking device, so it can be
completely stationary while under use. It is
available in two types of wheels made of
Cast Iron or Rubber. It is also available in
two sizes 6" or 8".
Castor Wheel Specification
Description
Rubber Wheel
Cast Iron Wheel
Product Code
AKR - ACS-153
AKR - ACS-154
Size
8 inch
6 inch
METAL CUTTING DISC
Metal Cutting Discs can be used for the
cutting of various metal structures on site,
to suit the construction needs. It can cut all
types of metals, including steel, bronze,
brass, copper, aluminum and iron.
Metal Cutting Disc
Description
Cutting Disc
Product Code
AKR - CC-155
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
– 45 –
AKR WOODEN &ALUMINUM
BEAMS
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
– 46 –
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
– 47 –
HT20plus TIMBER BEAM
(KAUFMANN)
The HT20plus Timber Beams are to be
u s e d i n s u p p o r t i n g s t r u c t u r e a n d
formworks for concrete buildings. The
load is applied in the direction of the
formwork beam height. The EN 13377
standard specifies the classification, the
requirements, and verification procedures
for formwork beams in the heights H = 20.
The Institute of Structural Engineering,
Berlin, has marked the formwork Timber
Beam HT20plus with a Ü stamp according
to the Technical Approval Z 9.1-146.
An HT20plus Timber Beam is a wooden
formwork beam, glued and solid walled I-
Beams. The wood species involved are
Spruce and Fir. The glue used is Melamine
resin-based adhesive, adhesive type I EN
301- approved for gluing load-bearing
wood structural elements. The chord is
visually graded to strength class S10
according to DIN 4074. These beams are
made of finger-jointed (according to DIN
68140-1), high-grade, solid whitewood.
Due to the 3-ply solid wood webs the
HT20plus formwork beams can be cut into
and supported at any length.
Finish Available :
Water Resistant Color Stain Coated.
Calculate Values
EI MOE x moment of inertia
Echord Modulus of elasticity chord (C24)
Eweb Modulus of elasticity web (3-ply panel)
Vk Characteristic value of lateral force
Rbk Characteristic value of supporting
Mk Moment
486 kNm2
11.000 N/mm2
6.700 N/mm2
23.9 kN
47.8 kN
10.9 kNm
Size
1450 mm
1900 mm
2450 mm
2900 mm
3900 mm
4900 mm
5900 mm
7900 mm
Weight (Kilo Grams)
6.67 kg
8.75 kg
11.27 kg
13.34 kg
17.94 kg
22.54 kg
27.14 kg
36.34 kg
Product Code
AKR - AMB-156
AKR - AMB-157
AKR - AMB-158
AKR - AMB-159
AKR - AMB-160
AKR - AMB-161
AKR - AMB-162
AKR - AMB-163
HT20plus Timber Beam Sizes
L
200
mm
40
mm
80 mm
26.8 mm
Weight & Dimensions
Beam Height
Chord Height
Chord Width
Web Thickness
HT20 Plus
200 mm
40 mm
80 mm
26.6 mm
Tolerances
+/- 2.0 mm
- 1.5 %
- 1.5 %
+/- 0.5 mm
AKR BEAMS
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
– 48 –
ALUMINUM BEAM
The Aluminum Beams are also used for
supporting structures and formworks for
concrete buildings. The load is applied in
the direction of the formwork beam
height. These beams are supplied with
timber insertion of 2" by 2" suitable for
nailing of plywood. The aluminum beams
have great bending and shear resistance,
allowing more weight to be supported
across increased spans, which in turn
reduces labor cost of fixing and erecting.
The beams are made of Aluminum Alloy
6082 with T6 Hardness. The elongation for
wall thickness of 5mm or above is 10% and
for 5mm or below 8%. There are available
in two profiles, one with a thickness of
2.80 mm and the second with a thickness
of 4.00 mm.
Finish Available : Water Resistant Color
Stain Coated.
Size / Thickness
1450 mm / 4.00 mm
1900 mm / 4.00 mm
2450 mm / 4.00 mm
2900 mm / 4.00 mm
3900 mm / 4.00 mm
4900 mm / 4.00 mm
5900 mm / 4.00 mm
7900 mm / 4.00 mm
1450 mm / 2.80 mm
1900 mm / 2.80 mm
2450 mm / 2.80 mm
2900 mm / 2.80 mm
3900 mm / 2.80 mm
4900 mm / 2.80 mm
5900 mm / 2.80 mm
7900 mm / 2.80 mm
Weight (Kilo Grams)
7.47 kg
9.79 kg
12.62 kg
14.94 kg
20.06 kg
25.24 kg
30.39 kg
40.69 kg
4.57 kg
5.99 kg
7.72 kg
9.14 kg
12.29 kg
15.44 kg
18.59 kg
24.89 kg
Product Code
AKR - ABM-164
AKR - ABM-165
AKR - ABM-166
AKR - ABM-167
AKR - ABM-168
AKR - ABM-169
AKR - ABM-170
AKR - ABM-171
AKR - ABM-172
AKR - ABM-173
AKR - ABM-174
AKR - ABM-175
AKR - ABM-176
AKR - ABM-177
AKR - ABM-178
AKR - ABM-179
Aluminum Beam Sizes
2.8mm42
15
0
42
60
1- Light Section
m4 m
42
15
0
42
60
2- Heavy Section
AKR BEAMS
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
– 49 –
AKRTIMBER
PRODUCTS
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
– 50 –
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
– 51 –
AKR TIMBER PRODUCTS
MARBOA
TIMBER SCAFFOLD BOARD
A l l T i m b e r S c a f f o l d B o a r d s a r e
manufactured in compl iance to BS
2482:2009. The boards are 38 mm Thick
225 mm Wide and available in two lengths,
3900 mm and 3000 mm. The 3900 mm
boards are also banded with steel clips at
the two ends for longer life and durability.
All Timber Scaffold Boards are made from
Austrian Wood and are kiln dried.
Finish Available : Kiln Dried.
PLY WOOD 13 PLY
‘L’ Actual
225
38m
m
Timber Scaffold Board Specification
Size / Type
38mm x 225mm x 3900mm
38mm x 225mm x 3000mm
Weight (Kilo Grams)
14.00
10.815
Product Code
AKR - TP-180
AKR - TP-181
Ply Wood 13 Ply Specification
Size / Type
1.220 x 2.440
Thickness
18 mm
Product Code
AKR - TP-186
Marboa Specification
Size / Type
8 x 8
8 x 8
10 x 10
10 x 10
Size (mtr.)
3
4
3
4
Product Code
AKR - TP-182
AKR - TP-183
AKR - TP-184
AKR - TP-185
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
AKR SAFETY TOOLS
– 52 –
SCAFFOLDING SPANNER
A Scaffolding Spanner is an essential tool
to any scaffold professional. This is as
ensuring that all elements are screwed,
locked and secured as tightly as possible
is paramount.
Finish : Galvanized.
SCAFFOLDING HAMMER &
PODGER
A Scaffolding Hammer & Podgeris a
necessary and appropriate tool to work
with AKR-LOCK SYSTEM Standards.
Using ordinary hammers can damage the
scaffolding and even break the casted Top
Cups.
MEASURING TAPE
A Measuring Tape is another important
accessory for a scaffolding professional.
Measurements are very important while
erecting & bracing scaffoldings.
Finish : Rubberized.
Scaffold Spanner Specification
Feature
7/16" Standard Hex Shaped aperture
Product Code
AKR - ST-187
Scaffold Hammer Specification
Feature
7/16" Standard Hex Shaped aperture
Product Code
AKR - ST-188
Measuring Tape Specification
Feature
8 Meters
Rubberized Housing (100mm x 80mm x 40mm)
Robust Belt Clip
Magnet Tape End
Product Code
AKR - ST-189
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
AKR SAFETY TOOLS
– 53 –
Hazard Tape Specification
Feature
Black & Yellow Pattern 50mm x 33mm
Product Code
AKR - ST-190
Scaffolding Tool Belt Specification
Feature
Leather
Product Code
AKR - ST-194
Scaffolding Tag Specification
Colour
Yellow
Red
Green
Warning
Caution
Danger
OK
Product Code
AKR - ST-191
AKR - ST-192
AKR - ST-193
HAZARD TAPE
A construction site can have several third
party visitors, who are not aware of the on
goings and latest dos and don'ts of a
particular site. An effective use of Hazard
Tape on site can warn visitors and
colleagues of ongoing scaffolding erection
and to maintain a safe distance from the
area.
SCAFFOLDING TAGS
Scaffolding Tags are key to letting fellow
construction workers and potential users
of the scaffold know about its condition.
The use of these warnings can be live
saving to say the least.
SCAFFOLDING TOOL BELT
A Scaffolding Belt is another essential
accessory for safety o f o thers and
c o n v e n i e n c e o f t h e s c a f f o l d i n g
professional. It has slots for a Stabila
Level, a Scaffolding Hammer & Podger, a
Scaffolding Spanner and a Measuring
Tape.
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
AKR- SAFETY TOOLS
– 54 –
SAFETY HARNESS BELT &
LANYARD
The most important piece of equipment for
a scaffolder is the Safety Harness Belt. It is
designed to anchor a working professional
to solid structure, to guard against slips
and falls. This is a must tool to guard
against accidental deaths.
SAFETY GLOVES
A Scaffolding Hammer & Podgeris a
necessary and appropriate tool to work
with AKR-LOCK SYSTEM Standards.
Using ordinary hammers can damage the
scaffolding and even break the casted Top
Cups.
Finish : Galvanized.
SAFETY HELMET
A Safety Helmet is predominantly used on
construction sites, to protect the head from
injury by falling objects, impact with other
objects, debris, bad weather and electric
shock Inside the helmet is a suspention
that spreads the helmet's weight over the
top of the head. It also provides a space of
approximately 30 mm (1.2 inch) between
the helmet's shell and the wearer's head so
that if an object strikes the shell, the
impact is less likely to be transmitted
directly to the skull
Scaffold Spanner Specification
Feature
Cotton, Leather
Product Code
AKR - ST-195
Safety Harness Belt & Lanyard Specification
Description
Safety Helmet
Product Code
AKR - ST-197
Safety Harness Belt & Lanyard Specification
Description
Safety Harness Belt, Lanyard
Product Code
AKR - ST-196
AKR Scaffolding AK
RMANAGEMENTSYSTEMS
ISO 9001:2008 CERTIFIED COMPANY
AKR Scaffolding AK
R
OFFICE :
403-3rd Floor, Concord Plaza,
Al Thaliya Street, Rawdah District,
Jeddah 21382, P.O. Box 123834, K.S.A.
TEL. : 02-652 8060 / 02-263 2405
FAX : 02-653 4060 / 02-263 2407
MOBILE : 054 0777 786 / 050 6349 835
E-MAIL : [email protected]
www.akrscaffolding.com
AJAY KUMAR RAJ BHATIA FACTORY :
Top Related