Air
Tools
& C
om
pressors
68OUTLETS NATIONWIDE
Air Tools & Compressors
Air
To
ols
& C
om
presso
rs 83-84 84-85
Air Accessories & Fittings
86
Direct Drive Compressors
87
Air Hose
85
88-90
Quick-find Index
Air Tools & CompressorsIn addition to a comprehensive range
of air tool accessories, hose and
fittings, we offer two distinctively
different classes of Air Power Tools -
andHeavy Industrial Duty Industrial
Heavy Industrial Duty DieGrinders
73-74
Industrial Duty DieGrinders
78
Heavy Industrial DutyImpact Wrenches
72-73
Industrial Duty ImpactWrenches
Industrial Duty ImpactWrench Kits
Industrial Duty RatchetWrench & Kit
Heavy Industrial DutyNeedle Scaler
75 76 77 77
Industrial Duty Hammers Industrial DutyScrewdrivers
78 79 80
Industrial Duty Drills
79
Industrial Duty AngleGrinders
74 75
75
75
8080
69 AVAILABLE FROM SELECTED
DISTRIBUTORS NATIONWIDE
Heavy Industrial DutyAngle Grinders
Heavy Industrial DutyDrills
Heavy Industrial DutyNailer
Heavy Industrial DutyRiveters
81
Industrial Duty Sanders &Polishers
82
Airbrush Kits
83
Staples & Nails
81
Duty
MAT-AIR
. Both ranges offer the
professional or serious DIYer a reliable
tool for most applications.
We supply compressors that
offer years of reliable service for most
applications. The range includes direct
drive compressors for DIY use and belt
drive compressors right up to
10hp/300litre for professional use.
91
Air
To
ols
& C
om
presso
rs
70Air Line Set Up/Information
Free Air Delivery - as available from compressor to drive air tools.
Litres/minute delivered by the compressor x 0.65 (65% efficiency).
This will give Free Air Delivery (FAD).
This can now be related to required air for air tools (each one different).
How do we calculate it?
�An inherent property of compressed air is that it always contains moisture. Much of this moisture can beremoved by using an air filter with a water trap. However, a small amount of water will always reach thetool. Moisture is an air tool's greatest enemy as it can create corrosion which can affect performance or atworst seize the motor. In order to eliminate this threat, three to four drops of air tool oil can be added to theinlet after use and running for a few seconds will prevent corrosion and line the inside surfaces of the airmotor with oil. Use proper air tool oil only, such as Air Turbine oil or Shell Tellus S22. Normal car oils areNOT suitable for use in air tools.
Air line setup to supply air to RACO air tools in the workshop environment
Moisture in the Air Line
EXAMPLE:
Displacement volume =Free Air Delivery (FAD) = 475 x 0,65 =
475 /min309 /min
l
l
Air tool requirement =FAD requirement = 200 ÷ 0,65 =
200 /min308 /min
l
l
The nett result from the compressor would be sufficient to run the air toolproviding that the use was not continuous.
For continuous use of the air tool the nett result from the compressor
should be at least 20% higher than the tool's FAD requirement i.e. 370l/min.
This would not put unnecessary strain on the compressor motor.
AIR LINE SET UP & FREE AIR DELIVERY CALCULATION
Free Air Delivery (FAD) Calculation
Conversion Factors
Many users install the quick-coupler at the intake of the tool, this is not recommended. Ratheradd a hose whip with the coupling between the whip and air supply or leader hose.
Check air lines and couplings for leaks
Once detected repair immediately
Small leaks reduce performance
Make sure that the total consumption of the air tools used simultaneously is lower than theFree Air Delivery (FAD) of the compressor
The air lines should be kept as short as possible, if a long line is unavoidable make use of a
�
�
�
�
�
larger diameter hose
Use 90 psi while running the tool
Higher pressure and unclean air will shorten the tool's life span because of faster wear andmay create a hazardous condition
Drain the air tank daily. Water in the air line will damage the tool
Clean the air inlet filter screen weekly
Use an in-line lubricator with SAE #10 oil
�
�
�
�
�
AIR
Drop Line
Main Line
Filter
Regulator
Lubricator
N.B. Never install aquick coupler here
Hose Whip
Drain Drain
Quick-coupler
Leader Hose
Pitch angle ofMain Line withflow direction
Water LegDrain withReservoir
Air
To
ols
& C
om
presso
rs
IMPACT WRENCH FEATURES
Rocking Dog Hammer System
Pin Clutch Hammer System
Twin Hammer System
Two Hammer System
Rocking Dog Hammer System
Pin Clutch Hammer System
Two Hammer System
�
�
�
�
�
�
�
�
�
�
�
�
�
Single-hammer action type impact wrenchesdeliver an excellent torque to weight ratio.
Simple to maintain.
Positive trigger action for speed variation.
Recommended for servicing applications inautomotive garages and repair centres.
Fast tightening and loosening with strong, fast air motor.
The well balanced, low vibration impact mechanism andnegligible torque reaction ensures low operator fatigue.
Light-weight.
Designed for heavy industry applications and high speedprocess lines.
Flexible - each tool has a wide torque range to suit manyapplications.
Ideal for truck engine work and general heavy maintenance.
Double hammer type impact wrenches offer well-balancedfastening and loosening performance with minimal torquereaction. This ensures longer life of impact clutch.
Great flexibility - each tool has a wide torque range to suit manyapplications.
Ideal for general industry, automotive repair and body-shopapplications.
�
�
�
�
Twin hammer impacts ensure balanced torque.
More power than pin clutch systems.
Easy operation, low-cost maintenance, superior performance.
More sensitive to air pressure regulation than other tools.
AIR
71 Impact Wrench Features AVAILABLE FROM SELECTED
DISTRIBUTORS NATIONWIDE
Air
To
ols
& C
om
presso
rs
72Impact Wrenches
HEAVY INDUSTRIAL DUTY AIR TOOLS
AAIR
�
�
�
�
�
Twin hammer impactleads to well balancedtorque
More power per poundthan pin clutch systems
Easy operation with lowmaintenance costs andexcellent performance
Sensitive to air pressureregulation
Ideal for work ontransport vehicles andgeneral heavymaintenance in heavyindustrial applications
HEAVY INDUSTRIAL DUTY, 13mm IMPACT WRENCH
(PSI)
(Bar)
Model
Square Drive
Capacity - Bolt Size
Free Speed
Max. Torque (Nm / ft-lb)
Overall Length
Air Inlet (PT)
Air Hose (ID)
Average AirConsumption
Nett Weight (kg)
(CFM)
(LPM)
Work AirPressure
RAC7205
13mm
16mm
7000 RPM
541/400
185mm
1/4" BSP
10mm
Compressor HP (min.)
See Product Code
Packing
12
340
2,5
90
6,3
5,5
AIR2150
Each
Twin Hammer System
�
�
�
�
�
Twin hammer impactleads to well balancedtorque
More power per poundthan pin clutch systems
Easy operation with lowmaintenance costs andexcellent performance
Sensitive to air pressureregulation
Ideal for work ontransport vehicles andgeneral heavymaintenance in heavyindustrial applications
AIR
HEAVY INDUSTRIAL DUTY, 20mm IMPACT WRENCH
Twin Hammer System
(PSI)
(Bar)
Model
Square Drive
Capacity - Bolt Size
Free Speed
Overall Length
Air Inlet (PT)
Air Hose (ID)
Max. Torque (Nm / ft-lb)
Average AirConsumption
Nett Weight (kg)
(CFM)
(LPM)
Work AirPressure
RAC7210
20mm
25mm
6500 RPM
1015/750
228mm
1/4" BSP
10mm
Compressor HP (min.)
See Product Code
Packing
14
396
4,55
90
6,3
5,5
AIR2150
Each
AIR
HEAVY INDUSTRIAL DUTY, 25mm IMPACT WRENCH
(PSI)
(Bar)
Model
Square Drive
Capacity - Bolt Size
Free Speed
Overall Length
Air Inlet (PT)
Air Hose (ID)
Max. Torque (Nm / ft-lb)
Average AirConsumption
Nett Weight (kg)
(CFM)
(LPM)
Work AirPressure
RAC7220
25mm
45mm
4000 RPM
2167/1800
381mm
1/2" BSP
13mm
Compressor HP (min.)
See Product Code
Packing
23,5
665
9,3
90 - 114
4,3 - 8,0
10
AIR2200
Each
�
�
�
�
�
Twin hammer impactleads to well balancedtorque
More power per poundthan pin clutch systems
Easy operation with lowmaintenance costs andexcellent performance
Sensitive to air pressureregulation
Ideal for work ontransport vehicles andgeneral heavymaintenance in heavyindustrial applications
Twin Hammer System
Specifications
Specifications
Specifications
Air
To
ols
& C
om
presso
rs
73 Impact Wrenches/Die Grinder AVAILABLE FROM SELECTED
DISTRIBUTORS NATIONWIDE
HEAVY INDUSTRIAL DUTY AIR TOOLS
AAIR
�
�
�
�
�
Twin hammer impact leads to well balanced torque
More power per pound than pin clutch systems
Easy operation with low maintenance costs and excellent performance
Sensitive to air pressure regulation
Ideal for work on transport vehicles and general heavy maintenance in heavy industrialapplications
HEAVY INDUSTRIAL DUTY, 25mm IMPACT WRENCH - 150MM ANVIL
(PSI)
(Bar)
Model
Square Drive
Capacity - Bolt Size
Free Speed
Max. Torque (Nm / ft-lb)
Overall Length
Air Inlet (PT)
Air Hose (ID)
Average AirConsumption
Nett Weight (kg)
(CFM)
(LPM)
Work AirPressure
RAC7200
25mm
45mm
3500 RPM
2440/1600
300/450mm
1/2" BSP
13mm
Compressor HP (min.)
See Product Code
Packing
25
708
9,3
90
6,3
10
AIR2200
Each
�
�
�
�
�
Twin hammer impact leads to well balanced torque
More power per pound than pin clutch systems
Easy operation with low maintenance costs and excellent performance
Sensitive to air pressure regulation
Ideal for work on transport vehicles and general heavy maintenance in heavy industrialapplications
AIR
HEAVY INDUSTRIAL DUTY, 25mm IMPACT WRENCH - 150MM ANVIL
(PSI)
(Bar)
Model
Square Drive
Capacity - Bolt Size
Free Speed
Overall Length
Air Inlet (PT)
Air Hose (ID)
Max. Torque (Nm / ft-lb)
Average AirConsumption
Nett Weight (kg)
(CFM)
(LPM)
Work AirPressure
RAC7215
25mm
45mm
3500 RPM
2440/1600
300/450mm
1/2" BSP
13mm
Compressor HP (min.)
See Product Code
Packing
25
708
10,6
90
6,3
10
AIR2200
Each
AIR
HEAVY INDUSTRIAL DUTY, 6mm MINI DIE GRINDER
�
�
�
�
Aluminium alloy housing is rugged yetlightweight
Lock off throttle to prevent accidental start up
Rear exhaust directs air away from theworkpiece
Designed for prolonged use in heavyindustrial applications
Twin Hammer System
Twin Hammer System
(PSI)
(Bar)
Model
Capacity / Disc Diameter
Overall Length
Free Speed
Air Inlet (PT)
Air Hose (ID)
Average AirConsumption
Nett Weight (kg)
(CFM)
(LPM)
Work AirPressure
RAC7320
6mm
194mm
18000 RPM
1/4" BSP
10mm Compressor HP (min.)
See Product Code
Packing
4
560
0,78
90
6,2
3
AIR2050/70/90
Each
Specifications
Specifications
Specifications
Air
To
ols
& C
om
presso
rs
74Die/Angle Grinders
HEAVY INDUSTRIAL DUTY AIR TOOLS
AAIR
HEAVY INDUSTRIAL DUTY, 6mm EXTRA LONG DIE GRINDER
�
�
�
�
Aluminium alloy housing is rugged yet lightweight
Lock off throttle to prevent accidental start up
Rear exhaust directs air away from the workpiece
Designed for prolonged use in heavy industrialapplications
�
�
�
�
�
Aluminium alloy housing is rugged yet lightweight
Heavy duty spiral bevel gearing in angled head for long tool life and low vibration
Fitted with lever type throttle
Removable side handle allows for increased maneuverability
Suitable for weld preparation and smoothing, rust removal, deburring andblending of steel, cast iron and aluminium
AIR
HEAVY INDUSTRIAL DUTY, 100mm ANGLE GRINDER
(PSI)
(Bar)
Model
Capacity / Disc Diameter
Spindle Thread
Overall Length
Free Speed
Air Inlet (PT)
Air Hose (ID)
Average AirConsumption
Nett Weight (kg)
(CFM)
(LPM)
Work AirPressure
RAC7350
100mm
3/8 UNF
246mm
13600 RPM
1/4" BSP
10mm
Compressor HP (min.)
See Product Code
Packing
9
255
1,3
90
6,3
5,5
AIR2150
Each
AIR
HEAVY INDUSTRIAL DUTY, 180mm ANGLE GRINDER
�
�
�
�
�
Aluminium alloy housing is rugged yet lightweight
Heavy duty spiral bevel gearing in angled head for long tool life and low vibration
Fitted with lever type throttle
Removable side handle allows for increased maneuverability
Suitable for weld preparation and smoothing, rust removal, deburring and blending of steel,cast iron and aluminium
(PSI)
(Bar)
Model
Capacity / Disc Diameter
Spindle Thread
Overall Length
Free Speed
Air Inlet (PT)
Air Hose (ID)
Average AirConsumption
Nett Weight (kg)
(CFM)
(LPM)
Work AirPressure
RAC7390
180mm
M14 x 2
300mm
7600 RPM
3/8" BSP
13mm
Compressor HP (min.)
See Product Code
Packing
25
635
2,9
90
6,3
10
AIR2200
Each
Specifications
Specifications
(PSI)
(Bar)
Model
Capacity / Disc Diameter
Overall Length
Free Speed
Air Inlet (PT)
Air Hose (ID)
Average AirConsumption
Nett Weight (kg)
(CFM)
(LPM)
Work AirPressure
RAC7325
6mm
338mm
18000 RPM
1/4" BSP
10mm Compressor HP (min.)
See Product Code
Packing
20
560
1,36
90
6,3
3
AIR2050/70/90
Each
Specifications
Air
To
ols
& C
om
presso
rs
75 Drill/Nailer/Riveter/Scaler AVAILABLE FROM SELECTED
DISTRIBUTORS NATIONWIDE
AIR
HEAVY INDUSTRIALDUTY NEEDLE SCALER
HEAVY INDUSTRIAL DUTY AIR TOOLS
AIR
HEAVY INDUSTRIAL DUTY, 13mm REVERSIBLE DRILL
�
�
�
�
�
Powerful air motor resists stalls andconserves energy
Triple idler planetary gearing forsmooth operation andextended tool life
Teasing throttleprovides precisecontrol
Handle exhaustreduces noiseand directs airaway from the workpiece
Designed for prolonged use in heavy industrial applications,engine work, auto body shops etc.
�
�
�
�
Aluminium alloy housing isrugged yet lightweight
Positive trigger action
Slim magazine foraccessibility into tightspaces and improvedvisibility of the workpiece
Ideal for installing panels,assembling crates,palettes and boxes andmany other applications
�
�
For nails please see page 81
Nails from 20mm to 50mm availablein boxes of 2500
�
�
�
Specially profiled 3 piece jaw set made from highgrade tool steel
Comfortable, extra long lever mechanismfacilitates ease of use
Employing the croken mandrel vacuumabsorption system which reduces airconsumption and allows for maximum efficiencyon downward riveting
(PSI)
(Bar)
Average AirConsumption
Nett Weight (kg)
(CFM)
(LPM)
Work AirPressure
Compressor HP (min.)
See Product Code
Packing
10
283
1,8
90
6,3
RAC7409
13mm
228mm
500 RPM
1/4" BSP
10mm
Model
Capacity / Size
Overall Length
Free Speed
Air Inlet (PT)
Air Hose (ID) 5,5
AIR2150
Each
AIR
HEAVY INDUSTRIAL DUTYNAILER
(PSI)
(Bar)
Average AirConsumption
Nett Weight (kg)
(CFM)
(LPM)
Work AirPressure
Compressor HP (min.)
See Product Code
Packing
RAC8015N
T20 - T50
280mm
245mm
1/4"BSP
10mm
Model
Capacity / Size
Overall Length
Overall Height
Air Inlet (PT)
Air Hose (ID) 5,5
AIR2150
Each
AIR
HEAVY INDUSTRIALDUTY RIVETER
(PSI)
(Bar)
Average AirConsumption
Nett Weight (kg)
(CFM)
(LPM)
Work AirPressure
Compressor HP (min.)
See Product Code
Packing
0,11
3,14
2,4
90
6,3
RAC7438
2,4 - 7,3mm
1420kg
18mm
317mm
1/4" BSP
10mm
Model
Capacity / Size
Traction Power
Stroke Length
Overall Length
Air Inlet (PT)
Air Hose (ID)
5,5
AIR2000/20/30
Each
0,9
25,7
1,5
90
6,3
(PSI)
(Bar)
Average AirConsumption
Nett Weight (kg)
(CFM)
(LPM)
Work AirPressure
Compressor HP (min.)
See Product Code
Packing
10
283
5,9
90
6,3
RAC8402
3mm Needle
2200
508mm
1/4" BSP
10mm
Model
Capacity / Size
Blows Per Min.
Overall Length
Air Inlet (PT)
Air Hose (ID) 5,5
AIR2150
Each
�
�
�
Positive triggercontrol
Powerful strikeaction
Used for rapiddescaling of metal
Specifications
Specifications
Specifications
Specifications
Air
To
ols
& C
om
presso
rs
INDUSTRIAL DUTY AIR TOOLS
AAIR
INDUSTRIAL DUTY, 13mm IMPACT WRENCH
�
�
�
�
�
Rocking dog hammer systemwrench delivers an excellenttorque to weight ratio
Simple to maintain
Positive action trigger for speedvariation
Available with regular anvil
Recommended for servicingapplications in automotive garagesand repair centres
�
�
�
�
�
�
�
Pin clutch develops up to 320ft-lbs of torque utility
Fast tightening and loosening withstrong, fast air motor
The well balanced, low vibrationimpact mechanism and negligibletorque reaction ensures lowoperator fatigue
Lightweight
Designed for industrialapplications and high speedprocess lines
Flexible - Each tool has a widetorque range to suit manyapplications
Ideal for truck engine work andgeneral heavy maintenance
RACO AIRRACO AIR
Rocking DogHammerSystem
AIR
INDUSTRIAL DUTY, 13mm IMPACT WRENCH
AIR
INDUSTRIAL DUTY, 20mm IMPACT WRENCH
�
�
�
�
�
�
Pin clutch develops up to 700ft-lbs oftorque utility
Fast tightening and loosening withstrong, fast air motor
Lightweight and wellbalanced, low vibrationimpact mechanismand negligibletorque reactionensures low operatorfatigue
Designed for heavy industrialapplications and high speed processlines
Flexible - each tool has a wide torquerange to suit many applications
Ideal for truck engine work and generalheavy maintenance
Pin ClutchHammerSystem
Pin ClutchHammerSystem
(PSI)
(Bar)
Model
Square Drive
Capacity - Bolt Size
Free Speed
Max. Torque (Nm / ft-lb)
Overall Length
Air Inlet (PT)
Air Hose (ID)
Average AirConsumption
Nett Weight (kg)
(CFM)
(LPM)
Work AirPressure
RAC7420
13mm
16
7000
311/230
178
1/4" BSP
10mm
Compressor HP (min.)
See Product Code
Packing
4
113
2,4
90
6,3
3
AIR2050/70/90
Each
(PSI)
(Bar)
Model
Square Drive
Capacity - Bolt Size
Free Speed
Max. Torque (Nm / ft-lb)
Overall Length
Air Inlet (PT)
Air Hose (ID)
Average AirConsumption
Nett Weight (kg)
(CFM)
(LPM)
Work AirPressure
RAC7421
13mm
16
7000
432/320
178
1/4" BSP
10mm
Compressor HP (min.)
See Product Code
Packing
4
113
2,4
90
6,3
3
AIR2050/70/90
Each
(PSI)
(Bar)
Model
Square Drive
Capacity - Bolt Size
Free Speed
Max. Torque (Nm / ft-lb)
Overall Length
Air Inlet (PT)
Air Hose (ID)
Average AirConsumption
Nett Weight (kg)
(CFM)
(LPM)
Work AirPressure
RAC7425
20mm
25
4800
941/700
241
1/4" BSP
10mm
Compressor HP (min.)
See Product Code
Packing
7
198
4,8
90
6,3
3
AIR2050/70/90
Each
Specifications
Specifications
Specifications
76Impact Wrenches
Air
To
ols
& C
om
presso
rs
INDUSTRIAL DUTY AIR TOOLS
AAIR
INDUSTRIAL DUTY, 13mm IMPACT WRENCH KIT (17 PIECE)
RACO AIRRACO AIR
�
�
Recommended for servicing applicationsin automotive garages and repair centres
Same specifications as RIC7420
Contents:
RAC742013mm Impact Wrench
10 Sockets: 9,10, 11, 13, 15, 17,19, 21, 22, 24mm
1 x 125mm Extension Bar
1 x Oil Bottle
1 x Hex Wrench
1 x Nipple
1 x Mini Oiler
1 x Plastic Case
Model
RAC7430
Size
17 Piece
Contents:
RAC742113mm Impact Wrench
10 Sockets: 9,10, 11, 13, 15, 17,19, 21, 22, 24mm
1 x 125mm Extension Bar
1 x Oil Bottle
1 x Hex Wrench
1 x Nipple
1 x Mini Oiler
1 x Plastic Case
�
�
Ideal for truck engine work and general heavymaintenance
Same specifications as RIC7421
� Same specifications as RIC7452
Model
RAC7431
Size
17 Piece
Model
RAC7451
Size
16 Piece
Specifications
(PSI)
(Bar)
Model
Size
Maximum Torque (Nm/ft-lb)
Overall Length mm
Free Speed
Air Inlet (PT)
Air Hose (ID)
RPM
Average AirConsumption
Nett Weight (kg)
(CFM)
(LPM)
Work AirPressure
RAC7452
13mm
68/50
254
160
1/4" BSP
10mm
3,9
110
Compressor HP (min.)
See Product Code
Packing
1,1
90
6,3
1,5
AIR2050/70/90
Each
AIR
INDUSTRIAL DUTY, 13mm IMPACT WRENCH KIT (17 PIECE)
Rocking DogHammerSystem
Pin ClutchHammerSystem
AIR
INDUSTRIAL DUTY, 13mmRATCHET WRENCH
AIR
INDUSTRIAL DUTY, 13mmRATCHET WRENCH KIT
�
�
�
�
�
�
Recommended for servicing applications in automotive garages and repaircentres
Compact head design allows greater flexibility in tight areas
East-to-grip reverse lever for simple directional change
Hardened gears allow greater durability over other economically pricedratchets
Applications: Removing and installing spark plugs, radiators, water pumpsand exhaust systems
Ultimate torque by hand
Contents:
RAC745213mm Impact Wrench
7 Sockets: 9,10, 11, 13, 14, 17,19mm
1 x 6mm x 74mm "L" ExtensionBar
1 x Adaptor
1 x Oil Bottle
1 x Plastic Case
77 Impact/Ratchet Wrenches/Kits AVAILABLE FROM SELECTED
DISTRIBUTORS NATIONWIDE
Air
To
ols
& C
om
presso
rs
INDUSTRIAL DUTY AIR TOOLS
AIR
INDUSTRIAL DUTY, 6mm MINI DIEGRINDER
RACO AIRRACO AIR
�
�
�
Aluminium alloy housing is rugged yetlightweight
Lock off throttle to prevent accidental start up
Rear exhaust directs air away from theworkpiece
(PSI)
(Bar)
Model
Capacity / Disc Diameter
Overall Length
Free Speed
Air Inlet (PT)
Air Hose (ID)
Average AirConsumption
Nett Weight (kg)
(CFM)
(LPM)
Work AirPressure
RAC7435
6
160
25000
1/4" BSP
10mm Compressor HP (min.)
See Product Code
Packing
6,5
184
0,4
90
6,3
3
AIR2050/70/90
Each
Specifications
AIR
INDUSTRIAL DUTY, 6mm EXTRA LONGDIE GRINDER
(PSI)
(Bar)
Model
Capacity / Disc Diameter
Overall Length
Free Speed
Air Inlet (PT)
Air Hose (ID)
Average AirConsumption
Nett Weight (kg)
(CFM)
(LPM)
Work AirPressure
RAC7436
6
260
25000
1/4" BSP
10mm Compressor HP (min.)
See Product Code
Packing
6,5
184
0,6
90
6,3
3
AIR2050/70/90
Each
Specifications
�
�
�
�
Aluminium alloy housing is rugged yet lightweight
Spiral bevel gearing in angled head for longtool life and low vibration
Removable dead handleallows access to work inrestricted areas
Suitable for weldpreparation and smoothing,rust removal, deburring andblending of steel, cast ironand aluminium
AIR
INDUSTRIAL DUTY, 100mm ANGLE GRINDER
(PSI)
(Bar)
Model
Capacity / Disc Dia. mm
Spindle Thread
Overall Length
Free Speed
Air Inlet (PT)
Air Hose (ID)
Average AirConsumption
Nett Weight (kg)
(CFM)
(LPM)
Work AirPressure
RAC7400
100
3/8 UNF
230
11000
1/4" BSP
10mm
Compressor HP (min.)
See Product Code
Packing
7,5
212
1,8
90
6,3
3
AIR2050/70/90
Each
Specifications
(PSI)
(Bar)
Model
Capacity / Disc Dia. mm
Spindle Thread
Overall Length
Free Speed
Air Inlet (PT)
Air Hose (ID)
Average AirConsumption
Nett Weight (kg)
(CFM)
(LPM)
Work AirPressure
RAC7405
180
Spline
343
7000
3/8" BSP
13mm
Compressor HP (min.)
See Product Code
Packing
16,5
467
3,2
90
6,3
7,5
AIR2180
Each
Specifications
AIR
INDUSTRIAL DUTY, 180mm ANGLE GRINDER
�
�
�
Aluminium alloy housing is ruggedyet lightweight
Lock off throttle to prevent accidentalstart up
Rear exhaust directs air away fromthe work piece
�
�
�
�
�
Aluminium alloy housing is rugged yet lightweight
Spiral bevel gearing in angled head for long tool life and low vibration
Removable dead handle allows access to work in restricted areas
Suitable for weld preparation and smoothing, rustremoval, de-burring and
blending of steel, cast iron andaluminium
78Die/Angle Grinders
Air
To
ols
& C
om
presso
rs
79 Drills/Hammers AVAILABLE FROM SELECTED
DISTRIBUTORS NATIONWIDE
�
�
�
�
�
Powerful air motor resists stallsand conserves energy
Triple idler planetary gearing forsmooth operation and extendedtool life
Teasing throttle provides precisecontrol
Handle exhaust reduces noise anddirects air away from theworkpiece
Suitable for all industrialapplications, engine work, autobody shops etc.
INDUSTRIAL DUTY AIR TOOLS
AAIR
INDUSTRIAL DUTY, 10mm DRILL
RACO AIRRACO AIR
(PSI)
(Bar)
Model
Capacity
Spindle Thread
Free Speed RPM
Overall Length mm
Air Inlet (PT)
Air Hose (ID)
Average AirConsumption
Nett Weight (kg)
(CFM)
(LPM)
Work AirPressure
RAC7407
10mm
3/8" x 24
1800
165
1/4" BSP
10mm
Compressor HP (min.)
See Product Code
Packing
6
170
1,13
90
6,3
3
AIR2050/70/90
Each
Specifications
AIR
INDUSTRIAL DUTY, 10mm REVERSIBLE DRILL
AIR
INDUSTRIAL DUTY, 13mm REVERSIBLE DRILL
�
�
�
�
�
�
Powerful air motor resists stallsand conserves energy
Fully reversible action
Triple idler planetary gearing forsmooth operation and extendedtool life
Teasing throttle provides precisecontrol
Handle exhaust reduces noiseand directs air away from theworkpiece
Suitable for all industrialapplications, engine work, autobody shops etc.
(PSI)
(Bar)
Model
Capacity
Spindle Thread
Free Speed RPM
Overall Length mm
Air Inlet (PT)
Air Hose (ID)
Average AirConsumption
Nett Weight (kg)
(CFM)
(LPM)
Work AirPressure
RAC7410
10mm
3/8" x 24
1800
165
1/4" BSP
10mm
Compressor HP (min.)
See Product Code
Packing
Specifications
�
�
�
�
�
�
Powerful air motor resistsstalls and conserves energy
Fully reversible action
Triple idler planetary gearingfor smooth operation andextended tool life
Teasing throttle providesprecise control
Handle exhaust reduces noiseand directs air away from theworkpiece
Suitable for all industrialapplications, engine work,auto body shops etc.
(PSI)
(Bar)
Model
Capacity
Spindle Thread
Free Speed RPM
Overall Length mm
Air Inlet (PT)
Air Hose (ID)
Average AirConsumption
Nett Weight (kg)
(CFM)
(LPM)
Work AirPressure
RAC7415
13mm
3/8" x 24
400
180
1/4" BSP
10mm
Compressor HP (min.)
See Product Code
Packing
8
226
1.82
90
6,3
3
AIR2050/70/90
Each
Specifications
Specifications
(PSI)
(Bar)
Average AirConsumption
Nett Weight (kg)
(CFM)
(LPM)
Work AirPressure
Compressor HP (min.)
See Product Code
Packing
Model
Chisel Shank (Round)
Bore Diameter (ID) in./mm
Piston Stroke Length mm
Blow Per Min (RPM)
Overall Length mm
Air Inlet (PT)
Air Hose (ID)
150mmAIR
HAMMER
190mmAIR
HAMMER
250mmAIR
HAMMER
RAC2010
0.401
3/4” 19.05
41
4500
133
1/4” BSP
10mm
10
283
1.4
90
6.3
5,5
AIR2150
Each
RAC2020
0.401
3/4” 19.05
66
3000
178
10
283
1.6
90
6.3
5,5
AIR2150
Each
1/4” BSP
10mm
RAC2030
0.401
3/4” 19.05
92
2200
216
10
283
2.04
90
6.3
5,5
AIR2150
Each
1/4” BSP
10mm
AIR
INDUSTRIAL DUTY HAMMERS
�
�
�
�
Powerful air motorresists stalls andconserves energy
Teasing throttleprovides precisecontrol
Handle exhaustreduces noise anddirects air away fromthe workpiece
Suitable for allindustrial applications,engine work, autobody shops etc.
6
170
1,13
90
6,3
3
AIR2050/70/90
Each
Air
To
ols
& C
om
presso
rs
80Screwdriver, Caulking Gun & Riveters
INDUSTRIAL DUTY AIR TOOLS
AAIR
INDUSTRIAL DUTY, CLUTCH TYPE SCREWDRIVER
RACO AIRRACO AIR
�
�
�
�
Cushion-clutch type is used in this series
There is little friction and very little torquebuild up
Vibration is minimised tothe operator andworkpiece
Smoothoperation andincreasedclutch life
�
�
�
�
Uses standard 310ml caulking cartridges
Metal frame
Rubber plunger
Non-drip
AIR
INDUSTRIAL DUTY CAULKING GUN
�
�
Specially profiled three-piece jaw
Comfortable extra long lever mechanism
AIR
INDUSTRIAL DUTY,2,4 - 4,8mm RIVETER Specifications
Model
Capacity
Traction Power Kg
Stroke Length mm
Overall Length mm
Air Inlet (PT)
Air Hose (ID)
RAC7433
2,4 - 4,8mm
720
14
230
1/4" BSP
10mm
Specifications
MaxTorque
(in-lbs)
(kgs-cm)
Model
Hex Shank Size
Bit Capacity mm
Free Speed RPM
Overall Length mm
Air Inlet (PT)
Air Hose (ID)
RAC7449
6,35mm
6
1800
45 - 45
52 - 130
178
1/4" BSP
10mm
(PSI)
(Bar)
Average AirConsumption
Nett Weight (kg)
(CFM)
(LPM)
Work AirPressure
Compressor HP (min.)
See Product Code
Packing
4
113
1,14
90
6,3
3
AIR2050/70/90
Each
RAC7406
50 x 213
305
1/4" BSP
6mm
Model
Cartridge Size mm
Overall Length mm
Air Inlet (PT)
Air Hose (ID)
(PSI)
(Bar)
Average AirConsumption
Nett Weight (kg)
(CFM)
(LPM)
Work AirPressure
Compressor HP (min.)
See Product Code
Packing
6
56
1,1
90
6,3
2
AIR2000/20/30
Each
Specifications
(PSI)
(Bar)
Average AirConsumption
Nett Weight (kg)
(CFM)
(LPM)
Work AirPressure
Compressor HP (min.)
See Product Code
Packing
0,03
0,85
1,5
90
6,3
2
Each
AIR2000/20/30
AIR
INDUSTRIAL DUTY, 2,4 - 4,8mm RIVETERKIT (85 PIECE)
Model
RAC7439
Size
85 Piece
�
�
�
Specially profiled three-piece jaw
Comfortable extra long lever mechanism
Blow moulded case
Contents:
RAC7433 (Specifications asabove)
1 x Air Riveter 2,4 - 4,8mm
1 x Joint Nut
1 x Air Hose Joint 1/4"
1 x Air Hose Joint 5/16"
10 x Rivet 4,8mm
10 x Rivet 4,0mm
10 x Rivet 3,2mm
10 x Rivet 2,4mm
1 x Mini Oiler
1 x Blow Case
1 x Jaw Case
1 x Jaw Case Joint
1 x Jaw
1 x Jaw Pusher
1 x Return Spring A
1 x Return Spring B
1 x Valve Pusher Spring
1 x Jaw Pusher Spring
1 x Nose Piece 4,8mm
1 x Nose Piece 4,0mm
1 x Nose Piece 3,2mm
1 x Nose Piece 2,4mm
1 x Frame Brass Joint
1 x Spanner Gauge
1 x Spanner
Air
To
ols
& C
om
presso
rs
INDUSTRIAL DUTY AIR TOOLS
AAIR
INDUSTRIAL DUTY, 10-22mm STAPLER
RACO AIRRACO AIR
�
�
�
�
Aluminium alloy housing isrugged yet lightweight
Positive trigger action
Slim magazine foraccessibility into tightspaces and improvedvisibility of the workpiece
Ideal for installing panels,mouldings, cabinets andfurniture manufacture
Part No.RAC8430RAC8445RAC8454RAC8464RAC8469
Size10mm13mm16mm19mm22mm
Staples - 20 Gauge with11,2mm Crown(for RAC8405)
Packed in Boxes of 5000
Part No.RAC8435RAC8440RAC8459
Size10mm13mm16mm
Staples - 22 Gauge with9,1mm Crown(for RAC8410N)
Packed in Boxes of 10000
Part No.RAC8080RAC8085RAC8090RAC8095RAC8400
Ref.F15F20F25F30F32
Nails - 18 Gauge (for RAC8010)
Packed in Boxes of 2500
Size15mm20mm25mm30mm32mm
Nails - 16 Gauge (for RAC8015N)
Part No.RAC8030RAC8035RAC8040RAC8045RAC8060RAC8465
Ref.T20T25T32T38T45T50
Packed in Boxes of 2500
Size20mm25mm32mm38mm45mm50mm
�
�
�
�
Aluminium alloy housingis rugged yet lightweight
Positive trigger action
Slim magazine foraccessibility into tightspaces and improvedvisibility of theworkpiece
Ideal for installingpanels, assemblingcrates, palettes andboxes and many otherapplications
AIR
INDUSTRIAL DUTY, 4-16mm STAPLER
AIR
INDUSTRIAL DUTY NAILER
AIR
STAPLES
�
�
�
�
Aluminium alloy housingis rugged yet lightweight
Positive trigger action
Slim magazine foraccessibility into tightspaces and improvedvisibility of the workpiece
Ideal for installing panels,mouldings, cabinets andfurniture manufacture
Model
Size
Crown
Air Inlet (PT)
Air Hose (ID)
Length mm
Height mm
Nett Weight (kg)
RAC8405
10 - 22mm
11,2mm (20 Gauge)
1/4" BSP
10mm
250
170
1,1
(PSI)
(Bar)
Work AirPressure
Compressor HP (min.)
See Product Code
Packing
90
6,3
2
AIR2000/20/30
Each
Specifications
Model
Size
Crown
Air Inlet (PT)
Air Hose (ID)
Length mm
Height mm
Nett Weight (kg)
RAC8410N
4 - 16mm
9,1mm (22 Gauge)
1/4" BSP
10mm
225
145
0,9
Specifications
Model
Size
Crown
Air Inlet (PT)
Air Hose (ID)
Length mm
Height mm
Nett Weight (kg)
RAC8010
F10 - F30
18 Gauge
1/4" BSP
10mm
245
185
1,1
Specifications
AIR
NAILS
(PSI)
(Bar)
Work AirPressure
Compressor HP (min.)
See Product Code
Packing
90
6,3
2
AIR2000/20/30
Each
(PSI)
(Bar)
Work AirPressure
Compressor HP (min.)
See Product Code
Packing
90
6,3
2
AIR2000/20/30
Each
81 Staplers/Nailer, Staples/Nails AVAILABLE FROM SELECTED
DISTRIBUTORS NATIONWIDE
Air
To
ols
& C
om
presso
rs
�
�
�
�
Powerful air motor
Teasing throttle providesprecise control
Accepts stick on orvelcro style 150mm Øsanding pads
Suitable for panel beatingshops, furnituremanufacturers and a host of industrialapplications
�
�
�
�
Powerful air motor
Teasing throttle providesprecise control
Extra strong sandpapergrips
Suitable for furnituremanufacturers and a hostof industrial applications
�
�
�
�
�
Powerful air motor
Flexible PVC, 180mm Ø polished headaccepts standard fleece pads
Teasing throttle provides precisecontrol
Handle exhaust reduces noise anddirects air away from the workpiece
Suitable for panel beating shops,furniture manufacturers and a host ofindustrial applications
INDUSTRIAL DUTY AIR TOOLS
AAIR
INDUSTRIAL DUTY DUAL ACTION SANDER
RACO AIRRACO AIR
AIR
INDUSTRIAL DUTY ORBITAL SANDER
AIR
INDUSTRIAL DUTY, 180mm VERTICAL POLISHER
Model
Sandpaper
Spindle Thread
Free Speed RPM
Overall Size mm
Air Inlet (PT)
Air Hose (ID)
RAC7440
152mm Ø
5/16" - 24NF
10000
254
1/4" BSP
10mm
Specifications
(PSI)
(Bar)
Average AirConsumption
Nett Weight (kg)
(CFM)
(LPM)
Work AirPressure
Compressor HP (min.)
See Product Code
Packing
7
198
1,8
90
6,3
3
AIR2050/70/90
Each
Model
Sandpaper
Free Speed RPM
Overall Size mm
Air Inlet (PT)
Air Hose (ID)
RAC7445
93 x 176mm
8000
187
1/4"
10mm
BSP
Specifications
(PSI)
(Bar)
Average AirConsumption
Nett Weight (kg)
(CFM)
(LPM)
Work AirPressure
Compressor HP (min.)
See Product Code
Packing
7
198
1,9
90
6,3
3
AIR2050/70/90
Each
Model
Buffer Size
Spindle Thread
Free Speed RPM
Overall Size mm
Air Inlet (PT)
Air Hose (ID)
RAC7450
180mm Ø
5/8" - 11 UNC
2000
190
1/4" BSP
10mm
Specifications
(PSI)
(Bar)
Average AirConsumption
Nett Weight (kg)
(CFM)
(LPM)
Work AirPressure
Compressor HP (min.)
See Product Code
Packing
9
255
1,86
90
6,3
5,5
AIR2150
Each
82Sanders/Polisher
Air
To
ols
& C
om
presso
rs
� Suitable for generalartwork, drawingsand art student use
Specifications
� Suitable for any artwork suchas photo-retouching, finedrawings, illustrations, precisecrafts, hobbyists and plasticmodels
Part No.
MTS4585
Size
7oz
AIR
GENERAL AIRBRUSH KIT
Model
Body Length mm
Nozzle mm
Control
Spray
Metal Cup
RAC1002
143
0.35
Push-Button
Adjustable
5cc
Glass Jars
PVC Air Hose mm
Metal Hanger
Spanner
Operating Air Pressure
22cc, 60cc
1860
1 Piece
1 Piece
0,7 - 2,5 kg/cm²
AIR
STANDARD AIRBRUSH KIT
Model
Body Length mm
Nozzle mm
Control
RAC1013
93 x 228
3
Push-Button
Spray
Metal Cup
Spanner
Operating Air Pressure
Adjustable
2cc, 5cc, 13cc
1 Piece
0.7 - 25 kg/cm²
Specifications
TOUCH-UP SPRAY GUNGRAVITY FEED
�
�
�
�
Gravity feed spray gun with a 0.4litre paint tank
Pressure 60 - 100PSI
Air consumption from 100 – 200L/min 3.5 - 7 CFM
Nozzle size 1,8mm
SPRAY GUN - GRAVITY FEED
Part No.
MTS4592
Size
0,4 Litre
Part No.
MTS4587
Size
1 Litre
�
�
�
�
1litre Capacity
50 - 80 PSI
Nozzle size 1,7mm
Air consumption from 200 -340 L/min 7 - 12 CFM
HIGH PRESSURE SPRAY GUNPROFESSIONAL
�
�
�
�
A low pressure spray gun forgeneral use
Max pressure 20 - 40 psi
Nozzle size 1,5 mm
Air consumption 0.2 cfm 5.7 l/min
LOW PRESSURE SPRAY GUN
Part No.
MTS4594
Size
1 Litre
�
�
�
�
Gravity feed spray gun for small touch upapplications
Hobbyist use
Bowl size 200 ml
Maximum pressure - 1.6 bar
83 Airbrushes/Spray Guns AVAILABLE FROM SELECTED
DISTRIBUTORS NATIONWIDE
Air
To
ols
& C
om
presso
rs
�
�
�
�
�
�
�
All general purpose spray gun accessorykit comprising the following;
High pressure, quality spray gun
Body washing gun
Tyre inflating gun with accurate gauge
Air duster gun
5 metre recoil hose which fits allaccessories
Supplied with 3 x spare 1/4" nozzles
�
�
�
�
A high pressure spray gun forgeneral use
Pressure 50 – 80 psi
Nozzle size 1.5 mm
Air consumption from 100 – 200L/min 7 – 12 cfm
Part No.
MTS4593
Size
1 Litre
Part No.
MTS4591
Size
5 Piece
�
�
�
�
�
�
Portable spray painting unit
Kit comprises tank, hose,gauge and spray gun
Tank capacity 10 litres of paint
Tank is pressurised from thecompressor to aid paint delivery
Equipped with safety valveoperatingat 5 bar to prevent overpressurisation
Leak proof tank lid has 4 wingclampsto ensure effective seal
Specifications
Model
Free Type
Standard Nozzle mm
Capacity of Tank Litres
Air Inlet (NPS)
AIR Hose (NPS)
10
283
11
30-50
2,1-3,5
Each
5,5
AIR2150
RAC1180
Pressure
1
10
1/4” BSP
10mm
CFM
LPM
Net Weight Kg
Work Air Pressure PSI
Packing
Compressor HP (min.)
See Product Code
Work Air Pressure BAR
Average AirConsumption
HIGH PRESSURE SPRAY GUN HIGH PRESSURE AIR KIT
AIR
PAINT TANK + SPRAY GUN
�
�
�
�
Screw coupling
1 litre capacity
Pressure 4-8 Bar
Suitable for all types of liquid
Part No.
HON8050
Size
1 Litre
PARAFFIN SPRAY GUN
�
�
A single action airtool which delivers a direct jet
of compressed air
Ideal for clearing debris anddust from the workpiece
AIR DUSTER GUN
Part No.
MTS2430
Pressure
4-8 Bar
84Spray Guns/Air Accessories
Air
To
ols
& C
om
presso
rs
�
�
�
�
Accurate gauge marked inPSI, kg/cm² and kPa withprotective rubber shroud
Deflating button
Valve clip
400mm hose
TYRE INFLATING GUN
Part No.
MTS6400
Pressure
0-12 Bar
Code No.
RAC7490
RAC7491
Size
3/8" BSP
1/4 BSP
�
�
�
�
5 piece solid brass fittings
3 x male connectors 1/4" BSP
1 x female connector 1/4" BSP
1 x quick coupler
BRASS QUICK-FIT AIR COUPLER SET
Part No.
HON0838
Size
5 Piece
AIR
MINI OILERS
�
�
Used as an in-line oiler for air tools
Fits directly to the tool
�
�
�
�
�
�
Used for cleaning carburettor jets,fuel lines, brake pipes
Gun has an infinitely variable air flow withfingertip control
Suitable for dispensing of some low viscosityfluids
High velocity 100mm nozzle, cranked for easy access
High impact resistant body
Body threaded 1/4” BSP to accept a quick coupler ifrequired
Part No.
SYK027600
BLOW GUN - 027600
Code Size
RIC1430 60 PSI
TYRE PRESSURE DIAL GAUGE - 660740
�
�
An easy to read, shockprotected dual scale gauge forcars and light commercialvehicles
Manufactured in accordancewith BS 4613
Code Size
Length : 90mm
Diameter : 62mm
Scale : 0-3.5 bar
SYK660740
�
�
�
�
�
�
�
With Zinc Alloy angle chuck
Super accurate, gearless operationelements for accuracy within ±2%
With bleeder, check valve installed tohold pressure until bleeder button ispushed
50mm dial with indicator 60 psi
Shock resistant
Metal housing with chrome platedbrass stem
Easy to read and carry
GAUGE - TYRE DIAL PRECISION - RT7/131B
�
�
�
�
�
Reinforced rubber hose
Complete with fittings on both ends
Operating temperature -40°C - +80°C
Maximum pressure 20 BAR
Fittings: 2 x ANI 0860 quick couplers
1 x ANI1530 threaded nipple 1/4” BSP female
1 x ANI1537 threaded nipple ¼” BSP male
AIR
COMPRESSOR AIR HOSE + FITTINGSRUBBER AIR
COMPRESSOR AIR HOSERUBBER
�
�
�
�
Reinforced rubber hose
Complete with fittings on both ends
Operating temperature -40°C -+80°C
Maximum pressure 20 BAR
Code No.
DAR1140
DAR1145
DAR1150
Size
6mm x 10m
8mm x 10m
10mm x 10m
Code No.
DAR1100
DAR1110
Packing
100m Roll
100m Roll
Size
6mm
8mm
Code No.
DAR1115
DAR1120
Packing
100m Roll
60m Roll
Size
10mm
13mm
85 Air Accessories/Air Hose AVAILABLE FROM SELECTED
DISTRIBUTORS NATIONWIDE
Air
To
ols
& C
om
presso
rs
86Air Accessories & Fittings
PART No.
Tail Piece Male Thread 1/4" BSP x 6mm 10/E
1/4" BSP x 8mm 10/E
1/4" BSP x 10mm 10/E
3/8" BSP x 6mm 10/E
3/8" BSP x 9mm 10/E
Tail Piece Male Thread
Tail Piece Male Thread
Tail Piece Male Thread
Tail Piece Male Thread
DESCRIPTION/SIZE
ANI0560
ANI0565
ANI0566
ANI0580
ANI0585
DESCRIPTION/SIZEPART No.
Universal Quick Coupler 1/4" Female 17/C
Universal Quick Coupler 3/8" Female 17/D
BSP
BSP
ANI0600
ANI0605
DESCRIPTION/SIZEPART No.
Universal Quick Coupler 1/4" Male 17/A
Universal Quick Coupler 3/8" Male 17/B
BSP
BSP
ANI06 0
ANI06 5
2
2
PART No.
Universal Quick Coupler + Tailpiece 6mm 17E
Universal Quick Coupler + Tailpiece 8mm 17E
Universal Quick Coupler + Tailpiece 10mm 17E
DESCRIPTION/SIZE
ANI0850
ANI0860
ANI0870
PART No.
Double Nipple 1/4" BSP x 1/4" BSP Male 33/N4
DESCRIPTION/SIZE
ANI1405
PART No.
Reducer Nipple 1/2' Male-3/8" BSP Female 33/R15
Reducer Nipple 3/8" BSP Male-1/4" Female 33/R10
BSP
BSP
DESCRIPTION/SIZE
ANI1470
ANI1500
DESCRIPTION/SIZEPART No.
Threaded Nipple 1/4" BSP Female EUR/2
Threaded Nipple 3/8" BSP Female EUR/2
ANI1530
ANI1533
PART No.
Threaded Nipple 1/4" BSP Male EUR/2
Threaded Nipple 1/2" BSP Male EUR/2
Threaded Nipple 3/8" BSP Male EUR/2
DESCRIPTION/SIZE
ANI1537
ANI1540
ANI1543
DESCRIPTION/SIZEPART No.
Tailpiece Nipple 6mm EUR/3
Tailpiece Nipple 8mm EUR/3
Tailpiece Nipple 10mm EUR/3
ANI1510
ANI1515
ANI1520
PART No.
ANI1160
DESC./SIZE
Lubricator1/4" BSP M/120/2
PART No.
ANI1235
DESC./SIZE
Regulator Filter1/4"BSP M/140/2
PART No.
ANI1040
DESC./SIZE
Filter 1/4"BSP M100/2
PART No.
ANI1600
DESC./SIZE
Regulator1/4" BSP M/150/2
ANI1620
DESC./SIZE
Regulator,Filter,Lubricator 1/4"BSP
ANI1625
Regulator,Filter,Lubricator 1/2"BSP
PART No.PART No.
ANI1290
DESC./SIZE
Manometer100KPA P40D1/8" BSP0-16 Bar
ANI1295
Manometer100KPA P50D1/8" BSP0-16 Bar
PART No.
AIRS2030-004
DESC./SIZE
Regulator,Filter,3/8" BSP (L)
AIRS2030-005
Regulator,Filter,1/2" BSP (L)
FITTINGS AND ACCESSORIESTECH
Air
To
ols
& C
om
presso
rs
87 AVAILABLE FROM SELECTED
DISTRIBUTORS NATIONWIDEDirect Drive Compressors
DEFINING AIR CONSUMPTION
N=V x P
tx 60 = L/min
Q= AIR
ß
DIRECT DRIVE 24 LITRE SINGLE STAGE HOBBY COMPRESSOR
Specifications
PartNumber
Capacity(Litres)
DisplacementL/Min. CFM
FADL/Min. CFM
Volts/Phase KwHP
RPMPSIBAR Cylinder &Formation
Weight(Kg)
24 1,52,0
2850 1 261154,5
7,0195
126 8
AIR2000 220/1
� Single cylinder, single stage compressor
Lubricated coaxial compressor perfect for DIY use
Cast iron cylinder
Piston with compression rings with quick settings
Air filter fitted to head
On/Off pressure switch
Pressure reducer with gauges
Wheels and vibration-damping foot
Overload protection of electric motor with manual reset
Drain cock
�
�
�
�
�
�
�
�
�
DIRECT DRIVE 50 LITRE SINGLE STAGE HOBBY COMPRESSOR
�
�
�
�
�
�
�
�
�
�
Single cylinder, single stage compressor
Lubricated coaxial compressor perfect for DIY use
Cast iron cylinder
Piston with compression rings with quick settings
Air filter fitted to head
On/Off pressure switch
Pressure reducer with gauges
Wheels and vibration-damping foot
Overload protection of electric motor with manual reset
Drain cock
Specifications
PartNumber
Capacity(Litres)
DisplacementL/Min. CFM
FADL/Min. CFM
Volts/Phase KwHP
RPMPSIBAR Cylinder &Formation
Weight(Kg)
50 1,52,0
2850 1 351154.5
7,0195
126 8
AIR2020 220/1
�
�
�
�
�
�
�
�
Suitable for craftsmen who need a compressor for professional use
Piston compressor three cylinder 90°W placed single stage
Splash lubrication, forced ventilation, cast iron cylinder, steel valve plate andsteel valves
Overload protection of electric motor with manual reset
ON/OFF pressure Switch
Pressure reducer with two cocks
Condensate drain cock
Ball line cock
Specifications
Specifications
Specifications
PartNumber
PartNumber
PartNumber
Capacity(Litres)
Capacity(Litres)
Capacity(Litres)
DisplacementL/Min. CFM
DisplacementL/Min. CFM
DisplacementL/Min. CFM
FADL/Min. CFM
FADL/Min. CFM
FADL/Min. CFM
Volts/Phase
Volts/Phase
Volts/Phase
Kw
Kw
Kw
HP
HP
HP
RPM
RPM
RPM
PSI
PSI
PSI
BAR
BAR
BAR
Cylinder &Formation
Cylinder &Formation
Cylinder &Formation
Weight(Kg)
Weight(Kg)
Weight(Kg)
NoiseN²
NoiseN²
100
100
150
1,5
2,2
2,2
2
3
3
1050
1050
1050
2V
2V
2V
85
90
108
1
1
115
115
115
4,5
8,9
8,9
7,0
11.2
11.2
195
385
385
126
250
250
8
8
8
AIR2030
AIR2050
AIR2070
220/1
220/1
220/1
BELT DRIVE 100 LITRE SINGLE STAGE COMPRESSOR
BELT DRIVE 100 LITRE SINGLE STAGE COMPRESSOR
BELT DRIVE 150 LITRE SINGLE STAGE COMPRESSOR
�
�
�
�
�
�
�
�
Suitable for craftsmen who need a compressor for professional use
Piston compressor three cylinder 90°W placed single stage
Splash lubrication, forced ventilation, cast iron cylinder, steel valve plate andsteel valves
Overload protection of electric motor with manual reset
ON/OFF pressure Switch
Pressure reducer with two cocks
Condensate drain cock
Ball line cock
�
�
�
�
�
�
�
�
Suitable for craftsmen who need a compressor for professional use
Piston compressor three cylinder 90°W placed single stage
Splash lubrication, forced ventilation, cast iron cylinder, steel valve plate andsteel valves
Overload protection of electric motor with manual reset
ON/OFF pressure Switch
Pressure reducer with two cocks
Condensate drain cock
Ball line cock
Air
To
ols
& C
om
presso
rs
88Belt Drive Compressors
Air
To
ols
& C
om
presso
rs
89 Belt Drive Compressors AVAILABLE FROM SELECTED
DISTRIBUTORS NATIONWIDE
BELT DRIVE 200 LITRE SINGLE STAGE COMPRESSOR
BELT DRIVE 250 LITRE SINGLE STAGE COMPRESSOR
�
�
�
�
�
�
�
�
Suitable for craftsmen who need a compressor for professional use
Piston compressor three cylinder 90°W placed single stage
Splash lubrication, forced ventilation, cast iron cylinder, steel valve plate andsteel valves
Overload protection of electric motor with manual reset
ON/OFF pressure Switch
Pressure reducer with two cocks
Condensate drain cock
Ball line cock
�
�
�
�
�
�
�
�
Suitable for craftsmen who need a compressor for professional use
Piston compressor three cylinder 90°W placed single stage
Splash lubrication, forced ventilation, cast iron cylinder, steel valve plate andsteel valves
Overload protection of electric motor with manual reset
ON/OFF pressure Switch
Pressure reducer with two cocks
Condensate drain cock
Ball line cock
Specifications
PartNumber
Capacity(Litres)
DisplacementL/Min. CFM
FADL/Min. CFM
Volts/Phase KwHP RPMPSIBAR Cylinder &
FormationWeight
(Kg)Noise
N²
200 2,23 1050 2V 13011158,911.2385 250 8AIR2090 220/1
Specifications
PartNumber
Capacity(Litres)
DisplacementL/Min. CFM
FADL/Min. CFM
Volts/Phase KwHP RPMPSIBAR Cylinder &
FormationWeight
(Kg)Noise
N²
250 4,05,5 950 2V 16911151720,46740 480 8AIR2150 380/1
Air
To
ols
& C
om
presso
rs
90Belt Drive Compressors
BELT DRIVE 270 LITRE SINGLE STAGE COMPRESSOR
BELT DRIVE 300 LITRE SINGLE STAGE COMPRESSOR
�
�
�
�
�
�
�
�
Suitable for craftsmen who need a compressor for professional use
Piston compressor three cylinder 90°W placed single stage
Splash lubrication, forced ventilation, cast iron cylinder, steel valveplate and steel valves
Overload protection of electric motor with manual reset
ON/OFF pressure Switch
Pressure reducer with two cocks
Condensate drain cock
Ball line cock
�
�
�
�
�
�
�
�
Suitable for craftsmen who need a compressor for professional use
Piston compressor three cylinder 90°W placed single stage
Splash lubrication, forced ventilation, cast iron cylinder, steel valveplate and steel valves
Overload protection of electric motor with manual reset
ON/OFF pressure Switch
Pressure reducer with two cocks
Condensate drain cock
Ball line cock
Specifications
PartNumber
Capacity(Litres)
DisplacementL/Min. CFM
FADL/Min. CFM
Volts/Phase KwHP RPMPSIBAR Cylinder &
FormationWeight
(Kg)Noise
N²
270 5,57,5 950 3W 204111521,4225925 600 8AIR2180 380/3
Specifications
PartNumber
Capacity(Litres)
DisplacementL/Min. CFM
FADL/Min. CFM
Volts/Phase KwHP RPMPSIBAR Cylinder &
FormationWeight
(Kg)Noise
N²
300 7,510 830 3W 22311153236,751385 900 8AIR2200 380/3
Air
To
ols
& C
om
presso
rs
91 Compressor care AVAILABLE FROM SELECTED
DISTRIBUTORS NATIONWIDE
Nothing at all stops an air compressor faster than the owner who
doesn't read the owner's manual.
There's likely to be some simple tips inside too, that will help you
to get good longevity out of your air compressor. Simple things to
do which you would not have believed if you don't study it.
Plus, if you do not stick to the guidelines in your own compressor
user manual there's an opportunity that you'll void your warranty.
As we know, air compressors are located in houses, small
businesses, services stations and industry of all sizes. Their
usage ranges from dust cleaning to hefty industry usage. These
also play an important role within the correct operation of many
tools.
Your receiver tank collects moisture from the air that it's
compressing, particularly if you live in a humid climate or by the
coast. Most tanks have a valve to allow draining of the moisture
that accumulates and it's up to you to make certain that you drain
frequently.
Verify all of your hoses periodically because they are the veins of
the air compressor. If they turn out to be cracked or corroded they
will quickly begin to leak and place undue stress on the rest of the
compressors elements.
There should be a shutdown safety button, check this works
regularly. The purpose of this technique is to shut off your
compressor if it's heating up too much or if the engine's oil is
getting a bit too low. This check will ensure an extended life for the
compressor.
If you are running a compressor that uses oil you should check
the level on a daily basis or before use to make sure that your
machine is topped up. Changing this oil when due will make sure
the compressor functions smoothly giving your machine a longer
life.
If your heat exchangers are dirty then they cannot do their job,
which is to lessen the working temperatures of your compressor.
Air compressors are tools that take in air and then compress and
store it in a compressed form in a tank. So another tip is to check
the tank regularly for wear and tear. The tank has the capacity to
withstand all the stress the air applies within it so it is very
important to check it’s integrity to prevent accidents.
Care & Attention:
Before draining the water you should be sure to
release the valve and the air pressure from the tanks.
Check hoses regularly and change
them if you find them cracked or broken.
Clean heat exchangers frequently.
Taking Care Of Your Air CompressorFor A Longer Life
IMPORTANTDo not use this
compressorin conjunction
With anextension lead
Do not switchoff compressorat plug on wall.
xx xCheck oil weekly top up if necessaryCheck air filters and keep them clean
Change air filters regularly according to working environment
Use pressureon/off switch to
switch offcompressor.
By using ideas the above you'll ensure a long life for your
compressor
A properly maintained air compressor will work smoothly for years
to come, but only if the compressor is maintained. They are
definitely an excellent tool to have for just about any occupation,
trade or workshop.
Daily Maintenance:
Weekly Maintenance:
Viscosity Grade100 oil
Monthly Maintenance:
You should drain moisture from your air compressor's tank on a
daily basis. Bleed most of the air pressure from the tanks before
opening the drain valves, allowing all moisture to drain from the
tanks.
Clean the air intake vents, and remove any obstructions. If your air
compressor utilises an air filter, clean the air filter weekly, and
replace when necessary. Check the oil level and top up to the
manufacturer’s recommended level with .
Check the operation of the safety release valve. It should open
and relieve air pressure and re-seat properly when closed with no
leaks. Also check your electrical cords and hoses for any
damage. Do not use your compressor if your electrical cord is
damaged.
Top Related