2002
Advanced Polymer Technology
Technical Symposium: Marina Fueling Systemdesign, construction, and operation
June 26, 2002
2002
Introduction
4Metallic Ducted(MD) Piping4Flexible Entry Boots for MD Series Pipe4Fittings
4Containment Sumps4Installation Guidelines
2002
Metallic Ducted Piping (MD)
4MD pipe consists of a doublestrip-wound galvanized steelliner for flexibility, andthermoplastic cover assuringwater-tightness, fire protection,and UV resistance
4APT UL/ULC listed single ordouble wall pipe containedinside the flexible MD pipe
4Received from factory withproduct pipe installed into theMD jacket and cut to length
2002
MD Piping Advantages
4 Provides added fire protection
4 Provides impact and crush resistance
4 Provides UV protection
4 Available in ½” through 2” product pipe sizes
4 MD piping will float on top of the water when empty,provides fast and easy installation
4 May be installed on fixed or floating docks
4 Can be installed on the side or under docks, in thewater & coiled for rise and fall of water levels
2002
Flexible Entry Boots (MD)
4 Made from gas and oilresistant nitrile rubber
4 Double water-tight sealoffers additional securityfrom harsh conditions ofmarina applications
4 Outside seal secures MDpipe to sump wall, whileinner and outer seal bothprovide water-tight security
2002
APT Fittings4 Three to choose from:
-Male Swivel (MS)
-Female Swivel (FS)
-Male Non-Swivel (MN)
4 Swivels Seal on 2 Viton“O” Rings
4 NPT Threads
4 Clam-Shell Mechanicalfittings
4 Strongest connectionusing no special tooling
2002
Containment Sumps
4 AST-2922-underground atthe shoreline transition4 Access Panel for inspection4 Large surface area for boot
placement4 Water-tight
4 Stainless Steel Sumpsunder the dock4 Corrosion resistant4 Additional fire protection4 Water-tight4 Manufactured per customer
specifications
2002
Installation Fixed Dock
2002
Installation Floating Dock
2002
Installation Floating Dock
2002
Warranty The seller warrants that all materials supplied by APT, Inc. will
be free from defects for a period of (5) years. Seller will repairor replace, at it’s option, components verified to havemanufacturing defects. Seller will reimburse approved laborcosts for repair or replacement of defective products. Thesystem must be installed using all APT products, must beinstalled by factory certified installers, and an APT warranty formmust be submitted. Warranty does not cover Acts of God,accidents, negligence or consequential damages arising fromany defects in the components.
THE WARRANTIES DETAILED ABOVE ARE THE ONLYWARRANTIES MADE BY SELLER AND ARE EXPRESSLY INLIEU OF ALL OTHER WARRANTIES, EXPRESSED ORIMPLIED, INCLUDING THE WARRANTIES OFMERCHANTABILITY AND FITNESS FOR PARTICULAR USE.
2002
MD Series Product Features
4 Utilizes APT UL/ULC listed product pipe
4 Provides additional fire protection4 Resists UV radiation4 Impact and crush resistant
4 Added flexibility, tighter bend radius4 Liquid-tight4 Available in sizes from ½” up to 2”
4 5 year system Warranty
2002
Questions
Top Related