TORX PLUS® Drive
The TORX PLUS® Drive was designed to enhance assembly line
performance. Manufacturers all over the world have realized
significant improvements and cost savings by switching to the TORX
PLUS® Drive.
TORX PLUS® Drive SolutionsThe straight, vertical sidewalls of the TORX PLUS® Drive System
virtually eliminate camout. Also, the TORX PLUS® recess completely
encloses the driver tip, reducing tool slippage as well as costly and
unsightly damage to the fastener and surrounding surfaces.
The elliptically-based geometric configuration of the TORX PLUS®
Drive System maximizes engagement between driver and fastener.
It spreads driving forces over the surface area, extending tool life.
TORX PLUS® Drive is the only drive system designed to ensure
optimum torque transmission and, ultimately, required clamp
load. With a true 0° drive angle , the TORX PLUS® system virtually
eliminates the radial forces that can cause stress on fastener
recesses. Ergonomic studies demonstrate that the TORX PLUS®
Drive System can reduce fatigue and muscular stress during the
manual assembly of fasteners. That’s because little or no end load
is required to keep the driver engaged in the recess.
AUTOSERT® Feature
The AUTOSERT® Feature is the high productivity answer to high rpm
engagement on the assembly line. The patented feature is a TORX
PLUS® Drive exclusive. Compound angle guide ramps, used at each
lobe, allow for higher rpm engagement. It’s the perfect solution for
automated, robotic and other assembly situations where the driver
bit is continuously rotating. The AUTOSERT® feature even helps in
manual assembly, creating a self-centering and engaging action.
www.acument-global.com
Aerospace/Defence Asia PacificContact details
CopyrightAll text, graphics and the selection and arrangement thereof, are the property of Acument Intellectual Properties, LLC and are ©2007 Acument Intellectual Properties, LLC. Allrights reserved.Trademarks: ACU®, ACUMENT®, ACUPOINT®, AGGRE-GATOR®, AUTOSERT®, BI-FLEX®, CAMCAR®, CAMGRIP®, CAMTAINERS®, CAMTRONIC®, CONFLEX®, CREST CUP®, DRIL-FLEX®, DRILIT®, ELCO®, FAB-LOK®, FLEX TECHNOLOGY®,FLO-SEAL®, HANGERMATE®, MAG-FORM®, MICROTECH®, NACRO™, OPTIA®, Our technology. Your success®, PANELMATE®, PUSHTITE®, SPEED FASTENING®, STALGARD®, STRUX®, TORX®, TORX PLUS®, ULTRACON®, and VENT-ALL® are trademarks or registered trademarks of Acument Intellectual Properties, LLC in the United States or other countries.AVBOLT®, AVDEL®, AVDELOK®, AVEX®, HEMLOK®, MAXLOK®, and MONOBOLT® are registered trademarks of Avdel UK Limited in the United Kingdom or other countries.Delta-PT®, Duro-PT® and PT® are registered trademarks of EJOT Verbindungstechnik GmbH & Co, KG.FASTITE®, PLASTITE®, REMFORM®, TAPTITE®, and TAPTITE 2000® are trademarks licensed by Research Engineering & Manufacturing Inc.DACROMET® is the registered trademark of Metal Coatings International Inc.PHILLIPS® is the registered trademark of Phillips Screw Company.MAThread® is the registered trademark of MAThread Inc.M-CUT® is the registered trademark of M-Cut Systems GmbH & Co. KG GMBH & CO.NYLOK® is the registered trademark of Nylok Corporation.MicroTorque™ is the trademark of Dynaroll Corporation.
Colin CampbellAsia Pacific Sales & Field Application Manager Aerospace/Defence t: (+61 3) 976 6426 ; (+61 403) 388 692e: [email protected]
Phua Cheng Siong Asia Pacific Technology Director t: (+65) 6372 5647e: [email protected]
Lim Say Yan Singapore & Malaysia Sales Representativet: (+65) 9691 6151 e: [email protected]
Business Profile
Acument Global Technologies is among the world’s largest
producers of engineered mechanical fastening products and
solutions with manufacturing and distribution facilities in 16
countries, strategically positioned to support more than 150
customers globally.
Acument supplies its products to customers in the Aerospace,
Electronics, Automotive, Transport, Commercial and Construction
industries. Its businesses have a long heritage in the industry
and some can trace their origins back to the 19th century.
Acument Asia Pacific’s Aerospace business operations
is lead out of its Australian operations and supported by its
global footprint of manufacturing, distribution, engineering,
quality and sales support resources that can be leveraged on to
meet customer requirements. The Australian operation has more
than 40 years of experience as a leading supplier of quality parts,
tools and engineering services.
Acument Global Locations36 Manufacturing and 18 Distribution Centers. Expanding in India, China & Central and Eastern Europe
Products
The Aerospace business segment has a long history supporting the industry
with its Avdel® & Cherry Aerospace® fasteners and installation system solutions.
Over the years the organization has expanded its product and service range
offering positioning itself as a preferred supplier.
Its global presence and strong engineering capabilities enable it to differentiate
itself in terms of its capability to supply:
> High quality, innovative and difficult to find products
> Strong design engineering and testing services
> Local & regional tooling repairs
> On-site technical support and staff training for products and tools
> Inventory and supply management
The Asia Pacific aerospace segment is able to supply a wide range of aerospace
grade fastening products and installation tools representing leading aerospace
companies such as:
List of Products, Customers & Services provided
A summary of our product ranges, key customers and service offering
Fasteners & Tools
Rivets, Screws, Nuts, Washers, Nutserts, Oddies,
Avdelok’s, Cable ties, Adhesives, Lubricants,
Studs, Stand offs, Nutplates, Ball Lock pins,
Lanyards, Struts, Latches, Composite fasteners,
Jo Bolt tooling, Hole preparation equipment, Drill
Bits HSS Cobalt, countersinks, screw driver tips,
Cold expansion consumables and tooling, Air
tools, Rivet Guns, Air Drills, Squeezers, Sanders,
Grinders, Routers, Impact wrenches, Torque
wrenches, Roller ratchets, Sealant guns, Deburring
tools, Wire twisters, Helicoil kits, Tensiometers,
Propeller Protractors, Sheet metal folding
machines, Shrinking and stretching machines,
Swaging machines, Lightening hole punches and
Air powered vacuums.
Some of our Customers
Qantas
Lovitt Technologies
Hawker De Havilland
John Holland Group
BAE
Australian RAAF.NAVY.ARMY
Peerless
Jetstar
Wesco
Hawker Richardson
API
Boeing Australia and USA
Aerostaff
Virgin Airlines
Ferra Engineering
Services Offered
> Specialist procurement expertise
> Product rationalization program (through warehouse investigation)
> Warehousing & distribution options
> Kitting & JIT programs
> E procurement
> Onsite representation
> Technical assistance (Local & International)
> New Product development
> Product and tooling application training, ergonomics, automation assistance
> Maintenance & support (Tooling, Consumables
> Program management
> Cost Benefit analysis
> Product teardowns