Accessible Pedestrian Signal Features
New possibilities for access in the US
Janet M. BarlowJanet M. Barlow
Accessible Design for the BlindAccessible Design for the Blind
Asheville, North CarolinaAsheville, North Carolina
Old types of audible signals = loudspeakers mounted on pedestrian signal heads
4/4/2008Accessible Design for the
Blind Slide 3
Pedhead-mounted APS problems Too loud – mask vehicular sounds that Too loud – mask vehicular sounds that
blind pedestrians want to hearblind pedestrians want to hear Too loud – bother neighborsToo loud – bother neighbors Confusing – users have to know what Confusing – users have to know what
direction they’re facing to figure out direction they’re facing to figure out which street the signal is indicatingwhich street the signal is indicating
Confusing – users not sure if sound is Confusing – users not sure if sound is APS or bird (for cuckoo/chirp signals)APS or bird (for cuckoo/chirp signals)
4/4/2008Accessible Design for the
Blind Slide 4
Pushbutton-integrated Accessible Pedestrian Signals (APS)
NOT NOT
cuckoos and cuckoos and chirps from chirps from pedheads!pedheads!
4/4/2008Accessible Design for the
Blind Slide 5
Pushbutton-integrated APS
Continuous Continuous pushbutton pushbutton locator tone locator tone with rapid with rapid tick WALK tick WALK indicationindication
4/4/2008Accessible Design for the
BlindSlide 6
Sounds attached; click on photo to hear sounds
Pushbutton-integrated APS Continuous Continuous
pushbutton pushbutton locator tone locator tone followed with followed with speech walk speech walk indicationindication
4/4/2008Accessible Design for the
Blind Slide 7
Sounds attached; click on photo to hear sounds
Features Following slides explain each featureFollowing slides explain each feature
Speaker at the pushbuttonSpeaker at the pushbutton Pushbutton locator tonePushbutton locator tone Tactile arrowTactile arrow Audible and vibrotactile walk indicationsAudible and vibrotactile walk indications Locator tone and walk indication volume Locator tone and walk indication volume
adjusts in response to ambient noise adjusts in response to ambient noise levelslevels
Audible beaconing on “request” (by Audible beaconing on “request” (by holding pushbutton for over 1 second)holding pushbutton for over 1 second)
4/4/2008Accessible Design for the
Blind Slide 8
Pushbutton Locator Tone Sound comes from the pushbutton Sound comes from the pushbutton Provides information about pushbutton Provides information about pushbutton
presence and locationpresence and location 1 tone per second, each tone less than 1 tone per second, each tone less than
0.15 seconds in duration0.15 seconds in duration Volume set to be heard within 6 – 12 feet, Volume set to be heard within 6 – 12 feet,
or at the building line, whichever is lessor at the building line, whichever is less Different sounds acceptable (click, beep, Different sounds acceptable (click, beep,
etc)etc)
4/4/2008Accessible Design for the
Blind Slide 10
Tactile arrow
Raised arrow aligned with Raised arrow aligned with direction of travel on the direction of travel on the crosswalk controlled by crosswalk controlled by the pushbuttonthe pushbutton
Arrow may be on the Arrow may be on the pushbutton or on part of pushbutton or on part of the device or sign above the device or sign above the pushbuttonthe pushbutton
4/4/2008Accessible Design for the
Blind Slide 11
Recommended WALK indications A rapid tick WALK indication (sound A rapid tick WALK indication (sound
on slide 6) at locations where the on slide 6) at locations where the speakers for APS for two different speakers for APS for two different crosswalks are separated by at least crosswalks are separated by at least 10 feet10 feet
Vibrotactile WALK indication - arrow Vibrotactile WALK indication - arrow (or other surface on pushbutton unit) (or other surface on pushbutton unit) that vibrates during WALKthat vibrates during WALK
4/4/2008Accessible Design for the
Blind Slide 13
Volume adjustment
Relatively quiet unless audible Relatively quiet unless audible beaconing is calledbeaconing is called
Volume only 2-5dB over ambient Volume only 2-5dB over ambient noise levelnoise level
Audible within 6 - 12 feet of the Audible within 6 - 12 feet of the pushbutton, or the building line, pushbutton, or the building line, whichever is closerwhichever is closer
4/4/2008Accessible Design for the
Blind Slide 14
Automatic volume adjustment Volume of pushbutton locator tone and Volume of pushbutton locator tone and
audible walk indications adjusts in audible walk indications adjusts in response to ambient soundresponse to ambient sound Louder when traffic is loud or there is Louder when traffic is loud or there is
other noise at the intersectionother noise at the intersection Quiet when traffic or other sounds are Quiet when traffic or other sounds are
quieter (night)quieter (night)
4/4/2008Accessible Design for the
Blind Slide 15
APS Location is critical Provide information to the user through Provide information to the user through
proximity to the departure pointproximity to the departure point Impose less of a cognitive load on Impose less of a cognitive load on
pedestrians who are visually impairedpedestrians who are visually impaired ‘‘I have pushed the button on my right’I have pushed the button on my right’ ‘‘The WALK indication is coming from The WALK indication is coming from
my right’my right’ ‘‘That sound is for my crosswalk’That sound is for my crosswalk’
Signal can be quieter due to proximitySignal can be quieter due to proximity
4/4/2008Accessible Design for the
Blind Slide 16
Installation recommendations
Beside the landing Beside the landing of the curb rampof the curb ramp
Separated by more Separated by more than 10 feet from than 10 feet from other APS on cornerother APS on corner
MUTCD says within MUTCD says within 5 feet of crosswalk 5 feet of crosswalk line and within 10 line and within 10 feet of the curbfeet of the curb
4/4/2008Accessible Design for the
BlindSlide 17
Installation Example
Near Near departure departure pointpoint
Poles Poles separated by separated by more than 10 more than 10 feetfeet
Low sound Low sound intensitiesintensities
Vibrotactile Vibrotactile availableavailable
4/4/2008Accessible Design for the
Blind Slide 18
Pushbutton within five feet of crosswalk line extended
4/4/2008Accessible Design for the
Blind Slide 19
< 5 feet
Installation example - APS separated by 10 feet (3m)
Reachable from level landing, within 10 ft Reachable from level landing, within 10 ft of curb, within 5 feet of crosswalk linesof curb, within 5 feet of crosswalk lines
4/4/2008Accessible Design for the
Blind Slide 21
Installation example - APS aligned with crosswalk lines
4/4/2008Accessible Design for the
Blind Slide 22
IF it’s impossible to install two poles 10 feet apart (in alterations, not new construction)
Two APS may be placed on same pole, Two APS may be placed on same pole, or closer than 10 feet, BUT additional or closer than 10 feet, BUT additional features are requiredfeatures are required
Use speech message WALK indication, Use speech message WALK indication, and, to clarify message,and, to clarify message, Pushbutton information messagePushbutton information message Tactile arrowTactile arrow
4/4/2008Accessible Design for the
Blind Slide 23
Pushbutton information message
Pushbutton Pushbutton message to provide message to provide intersection intersection informationinformation
Plays when Plays when pushbutton is pushbutton is pressed for 1 pressed for 1 second or moresecond or more
4/4/2008Accessible Design for the
BlindSlide 24
Click on photo to hear message
Pushbutton information message and speech walk message example
4/4/2008Accessible Design for the
Blind Slide 25
Audible beaconing
Sound from the opposite side of the street Sound from the opposite side of the street is used to provide directional guidance is used to provide directional guidance during street crossingduring street crossing
Provided after pedestrian holds the Provided after pedestrian holds the pushbutton in for over one second to call pushbutton in for over one second to call the audible beaconingthe audible beaconing
Walk tone and the subsequent locator tone Walk tone and the subsequent locator tone increased in volume during the next signal increased in volume during the next signal cyclecycle
4/4/2008Accessible Design for the
Blind Slide 26
Additional possible feature: Crosswalk Map
Tactile map of crosswalkTactile map of crosswalk Symbols (from bottom Symbols (from bottom
of picture) for: of picture) for: down curb,down curb, bike lanebike lane 2 lanes of cars 2 lanes of cars
from leftfrom left IslandIsland rail linerail line 2 lanes of cars 2 lanes of cars
from rightfrom right up curbup curb
4/4/2008Accessible Design for the
BlindSlide 27
Thanks to: Lukas Franck of The Seeing Eye, and Lukas Franck of The Seeing Eye, and
Billie Louise Bentzen of Accessible Design Billie Louise Bentzen of Accessible Design for the Blind for photos and assistance in for the Blind for photos and assistance in developmentdevelopment
John McGaffey from Polara Engineering, John McGaffey from Polara Engineering, Roger Peterson from Prismatek, Doug Roger Peterson from Prismatek, Doug Gubbe from Novax, for photos and soundsGubbe from Novax, for photos and sounds
Doug Barlow for technical helpDoug Barlow for technical help Lois Thibault, US Access Board, for Lois Thibault, US Access Board, for
feedback and suggestionsfeedback and suggestions
4/4/2008Accessible Design for the
Blind Slide 28
For more information, contact:
Janet M. Barlow Janet M. Barlow
Accessible Design for the BlindAccessible Design for the Blind
3 Manila Street3 Manila Street
Asheville, NC 28806Asheville, NC 28806
770-317-0611770-317-0611
[email protected]@accessforblind.org
Top Related