Folie 1AACOMA Webinar : Market & Trends in the Composites
Industry
and the impact of the COVID-19 Crisis - organized by Flanders Make
in cooperation with AVK and AMAC –
Dr. Michael Effing, AMAC; Dr. Elmar Witten, AVK
3rd December 2020 – Online Webinar
page 2 Federation of Reinforced Plastics
Introduction of the AACOMA project- by M. Effing
Trends for Composites in the Automotive industry- by M.
Effing
Lessons learned from the BMW I3 Carbon Composite Project
Cost- efficient and robust manufacturing processes
The European Composite Market- by E. Witten
by Market/ Application
by Technology
by Region
Impact of the Covid-19 Crisis and outlook of the Composites
Industry- by M. Effing
Q & A
Introduction of the AACOMA project- by M. Effing
Trends for Composites in the Automotive industry- by M.
Effing
Lessons learned from the BMW I3 Carbon Composite Project
Cost- efficient and robust manufacturing processes
The European Composite Market- by E. Witten
by Market/ Application
by Technology
by Region
Impact of the Covid-19 Crisis and outlook of the Composites
Industry- by M. Effing
Q & A
Composites At A Glance
Source: Roland Berger Study – “Series production of high-strength
composites” 2012
page 5 Federation of Reinforced Plastics
Objectives Acceleration of advanced manufacturing by making the
demonstration of advanced Composite Manufacturing in close
interactivity with Companies by
• Communication • Co-creation • Showing Proof of Concepts •
Networking • Initiating new projects
Industry4.0
Advanced Materials
Main activities
Composites- A Key Industry for High-Wage Countries Europe
Composites are a very attractive industry for many markets and
applications
© manwalk / Manfred Walker / pixelio.de
Advantages of Composites:
• The Euregio EMR is a future hot spot for lightweight
composites
• Composites are a key technology to support the economic
growth
• Composites have a high technological performance and innovation
potential
• Composites allow automated mass production
• Composites are high energy and ressource efficient
• Composites bring sustainable and high- quality work places in
Europe
© Source: Automotive Training Center
33.33
Automotive
33.33
Geben Sie zum Aktualisieren des Diagramms Daten in die Tabelle ein.
Die Daten werden automatisch im Diagramm gespeichert.
page 8 Federation of Reinforced Plastics
Introduction of the AACOMA project- by M. Effing
Trends for Composites in the Automotive industry- by M.
Effing
Lessons learned from the BMW I3 Carbon Composite Project
Cost- efficient and robust manufacturing processes
The European Composite Market- by E. Witten
by Market/ Application
by Technology
by Region
Impact of the Covid-19 Crisis and outlook of the Composites
Industry- by M. Effing
Q & A
Carbon Fiber Composites Life Modul
Aluminium Drive Modul
Complete Carbon Composite Value Chain integrated into the BMW
operation
500 composites experts recruited and transformed into Auto
experts
BMW - The Pioneer of Carbon Composites Structures for EV
BMW i3 [IAA September 2013]
BMW I3 created a Hype in the Carbon Composite Market in 2012
page 10 Federation of Reinforced Plastics
BMW - The Pioneer of Carbon Composites Structures for EV
30 % weight reduction leads to significant CO2 reductions
3000 liters lower fuel consumption during a 250,000 km life
cycle
Source: Toray, Japan Carbon Fiber Manufacturers Association (JCMA),
AMAC, MC Kinsey
CO2 – Emission reduction
Total: 1380 kg Total: 970 kg (-30%)
Source BMW i3
400
95
310.1
164.9
1380
970
29.71%
Ziehen Sie zum Ändern der Größe des Diagrammdatenbereichs die
untere rechte Ecke des Bereichs.
page 11 Federation of Reinforced Plastics
34 Carbon Composites Components
15 monolithic RTM Parts
BMW Life Module in Carbon Composites
Source: BMW
Issues: • Waste – 1000 tons/ year in Carbon Fiber • Cost •
Reproduceability/ QC • Recycling- Carbon Fiber recycled in
nonwovens and engineered plastics
page 12 Federation of Reinforced Plastics
Lightweight is not the number 1 target anymore, due to E-mobility
and Autonomous Driving, but still important
Cost-efficient materials
Cost-efficient processes
Lessons Learned from the BMW I3 Carbon Project
Source: BMW
Thermoplastics are in favour
Mass Production Requires Further Innovation and Cost
Reduction
Source: Roland Berger Study – “Series production of high-strength
composites”
30-40%
28
Trends: The 4 Most Promising Manufacturing Technologies
Hybrid Thermoplastic Composites
High Speed RTM
Hybrid Thermoplastic Composites (HTC)
High-Speed RTM
Source: Hexion
Source: BMW
High-Performance SMC
Source: Menzolit
Source: MAN
Tubes and Pressure Vessels
Source: R. Schmitt and A. Witte / Proceedings in Manufacturing
Systems
Source: Airborne - Pipes for Oil & Gas with Thermoplastic
Composites
Source: PLASTIC OMNIUM- Composite Pressure Vessel for Fuel Cell
Electric Vehicles
page 19 Federation of Reinforced Plastics
Introduction of the AACOMA project- by M. Effing
Trends for Composites in the Automotive industry- by M.
Effing
Lessons learned from the BMW I3 Carbon Composite Project
Cost- efficient and robust manufacturing processes
The European Composite Market- by E. Witten
by Market/ Application
by Technology
by Region
Impact of the Covid-19 Crisis and outlook of the Composites
Industry- by M. Effing
Q & A
Founded in 1924
Members along the entire value-added chain in the area of
reinforced plastics
~ 230 (inter)national member companies (1/5 non German); 7 Dutch
companies
> 1700 personal contacts inside the companies
Founding-Member of „Composites Germany“
Board Member of EuCIA
Board Member of GKV
GRP Production Europe (kt)
GRP Production Europe (kt)
GRP Production Europe (kt)
GRP Production Europe - Applications
GRP Production Europe (kt) - Processes
2016 2017 2018 2019 2020 SMC (kt) 198 202 204 205 174
BMC (kt) 76 78 81 82 70
SMC/BMC (kt) 274 280 285 287 244
Hand lay-up (kt) 140 140 140 139 121
Spray-up (kt) 97 98 99 98 88
Open mould (kt) 237 238 239 237 209
RTM (kt) 141 146 148 148 131
Sheets (kt) 89 93 96 94 85
Pultrusion (kt) 50 53 55 56 50
Continuous processing (kt) 139 146 151 150 135
Filament winding (kt) 80 78 79 78 70
Centrifugal casting (kt) 68 67 69 68 60
Pipes and Tanks (kt) 148 145 148 146 130
GMT/LFT (kt) 140 145 152 156 132
Others (kt) 17 18 18 17 15
Total Market (kt) 1.096 1.118 1.141 1.141 996
page 27 Federation of Reinforced Plastics
GRP Production Europe (2020) - Market Segments
page 28 Federation of Reinforced Plastics
Market Development GMT/LFT
GRP Production Europe – Market Segments
2020 = estimated; Base-Value: 2007=100
page 30 Federation of Reinforced Plastics
Composites Index (2/2020) – Process-Technology
GRP Production Europe – Development (kt)
* Eastern Europe = Poland, the Czech Republic, Hungary, Rumania,
Serbia, Croatia, Macedonia , Latvia, Lithuania, Slovakia, Slovenia
2020 = estimated
page 32 Federation of Reinforced Plastics
GRP Production Europe – Development (Market Share)
* Eastern Europe = Poland, the Czech Republic, Hungary, Rumania,
Serbia, Croatia, Macedonia , Latvia, Lithuania, Slovakia, Slovenia
2020 = estimated
page 33 Federation of Reinforced Plastics
GRP Production Europe (2020) - Market Segments
https://www.solico.nl/composite-news/composite-whale-tail
Introduction of the AACOMA project- by M. Effing
Trends for Composites in the Automotive industry- by M.
Effing
Lessons learned from the BMW I3 Carbon Composite Project
Cost- efficient and robust manufacturing processes
The European Composite Market- by E. Witten
by Market/ Application
by Technology
by Region
Impact of the Covid-19 Crisis and outlook of the Composites
Industry- by M. Effing
Q & A
COVID 19 Impact by Region
Volume 2020 vs 2019 Recovery by
Europe - 10 % 2022
China + 3 % 2020
USA - 15 % 2022
COVID 19 Impact by Market
Recovery by
Building and Infrastructure
page 38 Federation of Reinforced Plastics
Volume 2020 vs 2019 Recovery by Thermoplastics
- 10 % 2022
COVID 19 impact for Sales & Business Development
Pre COVID-19 After COVID-19
(Level of Importance) (Level of Importance)
Trade shows • Top 3 Globally • Regional/Smaller
Phone
The Euregio EMR is a future hot-spot for Composites
The AACOMA project is initiating cross-border cooperation
Trends: The automotive market is needs urgently robust cost-
efficient composites manufacturing processes
Aerospace was impacted the most followed by Automotive
Recovery: The last quarter 2020 is already looking promising
Our day-to-day life in sales and business development will be
different after the COVID Crisis
Outlook
Introduction of the AACOMA project- by M. Effing
Trends for Composites in the Automotive industry- by M.
Effing
Lessons learned from the BMW I3 Carbon Composite Project
Cost- efficient and robust manufacturing processes
The European Composite Market- by E. Witten
by Market/ Application
by Technology
by Region
Impact of the Covid-19 Crisis and outlook of the Composites
Industry- by M. Effing
Q & A
Q&A Session: Market, Trends & Impact of COVID-19
page 43 Federation of Reinforced Plastics
Thanks a lot for your attention - let´s stay in contact -
Dr. Michael Effing
[email protected] Dr. Elmar Witten
[email protected]
AVK – Federation of Reinforced Plastics Am Hauptbahnhof 10 60329
Frankfurt am Main/ Germany Tel: +49 (0)69 271077-0
www.avk-tv.de
AMAC GmbH Finkenhag 1b 52074 Aachen/ Germany Tel: +49 (0)241 912
9022
Agenda
Agenda
Agenda
BMW Life Module in Carbon Composites
Lessons Learned from the BMW I3 Carbon Project
Mass Production Requires Further Innovation and Cost
Reduction
Trends: The 4 Most Promising Manufacturing Technologies
Hybrid Thermoplastic Composites (HTC)
GRP Production Europe (2020) - Market Segments
Market Development GMT/LFT
Composites Index (2/2020) – Process-Technology
GRP Production Europe – Development (Market Share)
GRP Production Europe (2020) - Market Segments
Agenda
Slide Number 37
Slide Number 38
Outlook
Agenda
Q&A Session: Market, Trends & Impact of COVID-19