46 cm 1.8 cm13.5
40.5cm35.5cm
21.5cm
10 cm
4.5 cm18.5 cm
32.5cm
26 cm
53 cm
35 cm
18 cm
16 cm
58 cm
50 cm
38 cm
19 cm
10 cm
Concern 1: (1) Fix the base framework to ensure thatthe camera enclosure is wellattached to the base;(2) Add an “L” end in the baseframework to keep the camera enclosure from sliding when Installed(3) Determine what is the optimal size for this base framework
Concern 2: the strength of the mobile part, both materialand the connector with other part
Concern 3: add the steal cableto the upper bar of the gondola system
Concern 4: the upper bar must be removable to give access tothe interior enclosure
Concern 5: to eliminate the sharp edges
Concern 6: to replace the boltswith a rugged type of weld (not a priority though)
Concern 7: because of item (4)we need to lengthen the main bar in a couple inches (the case does not need to be completely open to give access to the interior enclosure.)
Concern 8: connector and power?
Concern 9: material and strength
Concern 10: waterproof ethernet connector
How many power we need, and where we can get, and through which way
A diagram to show the basic set-up for the whole camera system in the tower:(1) Safety part(2) Reference for camera(3) Camera system
Data download?
Other sensor?
Time schedule?
Top Related