8/18/2019 2012-03-14 Recommedation of Installation of VDT (002)
1/6
1 | © 2011 DrinkStar GmbH | 14.03.2012
INSTALLATION OF DOSING-UNIT
Beverage pipeline from the dosing-unit to the filler: 2-10 m length
(at least 2 bows at 90 , supported, strainless)
Inlet run before IDM: ≥≥≥≥ 5 times pipeline diameter
8/18/2019 2012-03-14 Recommedation of Installation of VDT (002)
2/6
2 | © 2011 DrinkStar GmbH | 14.03.2012
Beverage pipeline from the dosing-unit to the filler: 2-10 m length
at least 2 bows at 90 before filler
fixed Pipes (supported, strainless)
Inlet run before IDM: ≥ 5 times pipeline diameter
horizontal and stable building
easily accessible from all sides
option for sampling (beverage) before dosing-Unit
Compressed air (4-6 bar, oil- / water-free)
Power supply (230 V)
INSTALLATION OF DOSING-UNIT
8/18/2019 2012-03-14 Recommedation of Installation of VDT (002)
3/6
3 | © 2011 DrinkStar GmbH | 14.03.2012
Please note the installation/dismounting of the
Velcorin Dosing Unit should be effected in
agreement with our application engineer.
INSTALLATION OF DOSING-UNIT
8/18/2019 2012-03-14 Recommedation of Installation of VDT (002)
4/6
4 | © 2011 DrinkStar GmbH | 14.03.2012
INVOLVMENT OF DOSING-UNIT
IN THE FILLING PROCESS 1
Filler Mixer Dosing-Unit
8/18/2019 2012-03-14 Recommedation of Installation of VDT (002)
5/6
5 | © 2011 DrinkStar GmbH | 14.03.2012
INVOLVMENT OF DOSING-UNIT
IN THE FILLING PROCESS 2Filler Mixer Dosing-Unit
8/18/2019 2012-03-14 Recommedation of Installation of VDT (002)
6/6
6 | © 2011 DrinkStar GmbH | 14.03.2012
INVOLVMENT OF DOSING-UNITIN THE FILLING PROCESS 3
Filler Mixer Dosing-UnitFlash-pasteuriser
Top Related