BS 3810 ..............................................................30
BS 4361 ........................................................31, 32
BS 4620 ..............................................................30
BS 4656 ..............................................................33
BS 4894 ..............................................................26
BS 5046 ..............................................................26
BS 5276 ........................................................26, 30
BS 5346 ..............................................................27
BS 5656 ..............................................................27
BS 5864 ..............................................................27
BS 5884 ..............................................................27
BS 6172 ..............................................................27
BS 6362 ..............................................................33
BS 6404 ..............................................................27
BS 6590 ..............................................................33
BS 6785 ..............................................................28
BS 6955 ........................................................18, 32
BS 7036 ..............................................................28
BS 7371 ..............................................................28
BS 7545 ........................................................17, 32
BS 7668 ..............................................................28
BS 7801 ..............................................................28
BS 7805 ..............................................................28
BS 7854 ........................................................17, 32
BS 7855 ..............................................................28
BS 7881 ..............................................................31
BS 7935 ..............................................................28
DD CEN/TS 14940 ..............................................19
BS EN 609 ..........................................................22
BS EN 778 ..........................................................12
BS EN 1218 ........................................................23
BS EN 1807 ........................................................23
BS EN 1870 ........................................................23
BS EN 1889 ........................................................23
BS EN 2240 ........................................................14
BS EN ISO 2740 ..................................................14
BS EN 2955 ........................................................22
BS EN ISO 3059 ..................................................34
BS EN 3464 ........................................................14
BS EN 3660 ........................................................14
BS EN 3730 ........................................................14
BS EN ISO 3907 ............................................14, 32
BS EN 3987 ........................................................14
BS EN 4113 ........................................................14
BS EN 4114 ........................................................14
BS EN 4234 ........................................................14
BS EN ISO 7500 ..................................................35
BS EN ISO 8044 ..................................................35
BS EN ISO 9934 ..................................................35
BS EN 10269 ......................................................22
BS EN 10349 ......................................................14
BS EN ISO 10438 ................................................35
BS EN ISO 10441 ................................................35
BS EN 12779 ......................................................23
BS EN ISO 13503 ................................................35
BS EN ISO 13703 ................................................35
BS EN ISO 13704 ................................................35
BS EN ISO 13849 ................................................35
BS EN ISO 13850 ................................................35
BS EN ISO 14224 ................................................36
BS EN ISO 14270 ................................................36
BS EN ISO 14272 ................................................36
BS EN ISO 14273 ................................................36
BS 7188 ..............................................................28
BS 8409 ........................................................12, 32
DD CEN/TS 15606 ..............................................19
BS EN ISO 927 ..............................................12, 32
BS EN 1176 ........................................................32
BS EN 1230 ........................................................12
BS EN ISO 2692 ..................................................34
BS EN ISO 5455 ..................................................34
BS EN ISO 11810 ................................................15
BS ISO 128 .........................................................37
BS ISO 8587 .......................................................37
BS ISO 11056 .....................................................37
BS ISO 15394 .....................................................18
BS ISO 16212 .....................................................38
BS ISO 16792 .....................................................38
DD ISO/TS 16610 ................................................38
Electrotechnical
BS 822 ................................................................24
BS 842 ................................................................24
BS 4177 ..............................................................26
BS 4999 ..............................................................24
BS 5266 ..............................................................26
BS 5285 ..............................................................27
BS 5685 ..............................................................30
BS 6133 ..............................................................27
BS 6259 ..............................................................27
BS 6290 ..............................................................32
BS 7647 ..............................................................28
BS 7697 ..............................................................28
BS 7856 ..............................................................28
BS 9000 ..............................................................31
BS EN ISO 24978 ................................................16
BS EN 60059 ......................................................23
BS EN 60384 ......................................................22
BS EN 60393 ................................................22, 32
BS EN 60598 ......................................................23
BS EN 60896 ................................................22, 32
BS EN 60950 ......................................................22
BS ISO 10596 .....................................................17
BS ISO 14813 .....................................................18
BS ISO 22179 .....................................................18
BS ISO 22472 .....................................................38
BS ISO 24097 .....................................................18
BS CECC 41000 ..................................................32
PD CLC/TR 50373 ...............................................29
PD CLC/TR 50422 ...............................................29
Engineering
BS 131 ................................................................24
BS 275 ................................................................30
BS 460 ................................................................22
BS 641 ................................................................30
BS 1109 ..............................................................30
BS 1127 ..............................................................24
BS 1407 ..............................................................25
BS 1449 ..............................................................25
BS 1660 ..............................................................25
BS 1974 ..............................................................30
BS 2772 ..............................................................26
BS 3015 ........................................................17, 31
BS 3575 ..............................................................30
The following British Standards are listed orreferred to in this issue of Update Standardswith the exception of those in ‘New WorkStarted’.
Building and civil engineering
BS 41 ..................................................................24
BS 65 ..................................................................24
BS 493 ................................................................24
BS 567 ................................................................24
BS 598 ................................................................24
BS 835 ................................................................24
BS 1377 ........................................................24, 25
BS 4315 ..............................................................26
BS 4787 ..............................................................26
BS 5422 ..............................................................22
BS 5507 ..............................................................27
BS 5642 ..............................................................27
BS 5854 ..............................................................27
BS 5950 ........................................................24, 27
BS 5977 ..............................................................27
BS 6037 ..............................................................27
BS 6999 ..............................................................28
BS 8000 ..............................................................28
BS 8008 ..............................................................28
BS 8102 ..............................................................12
BS 8103 ..............................................................12
BS 8204 ..............................................................29
BS 8427 ..............................................................29
BS EN 934 ..........................................................12
BS EN ISO 11091 ................................................35
BS EN 14023 ......................................................49
BS EN ISO 15927 ................................................16
BS EN ISO 19903 ................................................36
BS EN ISO 19904 ................................................37
BS ISO 128 .........................................................37
BS ISO 1920 .......................................................16
BS ISO 14401 .....................................................18
PD CEN/TR 15894 ...............................................19
PD 6682 .............................................................19
PD 6688 .............................................................19
NA to BS EN 1993 ...............................................12
Consumer products and services
BS 308 ................................................................34
BS 870 ................................................................22
BS 1054 ..............................................................24
BS 1347 ..............................................................24
BS 2457 ..............................................................26
BS 2459 ..............................................................26
BS 3459 ..............................................................26
BS 3509 ..............................................................26
BS 4358 ..............................................................26
BS 4484 ..............................................................26
BS 4585 ........................................................12, 32
BS 4672 ..............................................................30
BS 4875 ..............................................................26
BS 5459 ..............................................................27
BS 6049 ..............................................................33
BS 6325 ..............................................................33
BS 6381 ..............................................................27
BS 6986 ..............................................................33
BS 7172 ..............................................................28
British Standards – Quick Reference Guide
4 Update Standards Jan 2010Prices may be subject to change.
BS TA 47 .............................................................21
BS 2TA 47 ...........................................................21
BS 2TA 48 ...........................................................21
BS TA 48 .............................................................21
BS 2TA 49 ...........................................................21
BS TA 49 .............................................................21
BS 2TA 50 ...........................................................21
BS TA 50 .............................................................21
BS 2TA 51 ...........................................................21
BS TA 51 .............................................................21
BS TA 52 .............................................................21
BS 2TA 52 ...........................................................21
BS TA 56 .............................................................22
BS 2TA 56 ...........................................................22
BS TA 57 .............................................................22
BS 2TA 57 ...........................................................22
BS 2TA 58 ...........................................................22
BS TA 58 .............................................................22
BS 2TA 59 ...........................................................22
BS TA 59 .............................................................22
BS 2TA 100 .........................................................22
BS 3TA 100 .........................................................22
BS AU 50 ............................................................38
BS AU 170 ..........................................................30
BS AU 206 ..........................................................38
BS AU 233 ..........................................................38
Health and environment
BS 2738 ..............................................................26
BS 5682 ..............................................................27
BS 6068 .....................................33, 34, 35, 36, 37
BS 6165 ..............................................................27
BS 6643 ..............................................................27
BS 6734 ..............................................................28
BS 6788 ..............................................................28
BS 7208 ..............................................................30
BS 7899 ..............................................................28
BS 7971 ..............................................................28
BS 8428 ..............................................................29
BS 8468 ..............................................................12
DD 180 ...............................................................29
DD CEN/TS 15674 ..............................................36
DD CEN/TS 15675 ..............................................36
BS EN ISO 140 ....................................................34
BS EN 455 ..........................................................12
BS EN 794 ..........................................................22
BS EN 1639 ........................................................14
BS EN 1640 ........................................................14
BS EN 1641 ........................................................14
BS EN 1642 ........................................................14
BS EN ISO 3822 ..................................................34
BS EN ISO 4049 ..................................................14
BS EN ISO 5667 ..................................................34
BS EN ISO 5961 ..................................................34
BS EN ISO 6222 ..................................................35
BS EN ISO 7027 ..................................................35
BS EN ISO 7886 ..................................................14
BS EN ISO 7980 ..................................................35
BS EN ISO 9963 ..................................................35
BS EN ISO 11980 ................................................15
BS EN 13501 ......................................................23
BS EN ISO 13716 ................................................35
BS 2B 30 .............................................................20
BS 3B 30 .............................................................20
BS 3B 31 .............................................................20
BS 2B 31 .............................................................20
BS 3B 32 .............................................................20
BS 2B 32 .............................................................20
BS 3B 33 .............................................................20
BS 2B 33 .............................................................20
BS L 170 .............................................................31
BS 5X 17 ............................................................31
BS HC 401 ..........................................................31
BS HC 402 ..........................................................31
BS 2HR 201 ........................................................20
BS 3HR 201 ........................................................20
BS 2HR 202 ........................................................20
BS 3HR 202 ........................................................20
BS HR 203 ..........................................................20
BS 2HR 203 ........................................................20
BS 2HR 204 ........................................................20
BS HR 204 ..........................................................20
BS 2HR 205 ........................................................20
BS HR 205 ..........................................................20
BS 2HR 206 ........................................................20
BS HR 206 ..........................................................20
BS 2HR 207 ........................................................20
BS HR 207 ..........................................................20
BS 2HR 208 ........................................................20
BS HR 208 ..........................................................20
BS SP 57 and 58 .................................................31
BS 2TA 1 .............................................................20
BS 3TA 1 .............................................................20
BS 2TA 2 .............................................................21
BS 3TA 2 .............................................................21
BS 2TA 6 .............................................................21
BS 3TA 6 .............................................................21
BS 2TA 7 .............................................................21
BS 3TA 7 .............................................................21
BS 2TA 10 ...........................................................21
BS 3TA 10 ...........................................................21
BS 2TA 11 ...........................................................21
BS 3TA 11 ...........................................................21
BS 2TA 12 ...........................................................21
BS 3TA 12 ...........................................................21
BS 3TA 13 ...........................................................21
BS 2TA 13 ...........................................................21
BS 2TA 21 ...........................................................21
BS 3TA 21 ...........................................................21
BS 2TA 28 ...........................................................21
BS 3TA 28 ...........................................................21
BS TA 38 .............................................................21
BS 2TA 38 ...........................................................21
BS 2TA 39 ...........................................................21
BS TA 39 .............................................................21
BS 2TA 40 ...........................................................21
BS TA 40 .............................................................21
BS 2TA 41 ...........................................................21
BS TA 41 .............................................................21
BS TA 42 .............................................................21
BS 2TA 42 ...........................................................21
BS 2TA 45 ...........................................................21
BS TA 45 .............................................................21
BS 2TA 46 ...........................................................21
BS TA 46 .............................................................21
BS EN ISO 14731 ................................................36
BS EN ISO 15011 ................................................15
BS EN ISO 15138 ................................................36
BS EN ISO 15156 ................................................15
BS EN 15503 ......................................................15
BS EN 15714 ......................................................16
BS EN ISO 15792 ................................................36
BS EN ISO 17776 ................................................36
BS EN ISO 21952 ................................................37
BS EN 23907 ................................................14, 32
BS EN ISO 24598 ................................................37
BS EN ISO 28139 ................................................16
BS ISO 230 .........................................................37
BS ISO 2041 .................................................17, 31
BS ISO 4190 .......................................................37
BS ISO 4229 .......................................................17
BS ISO 4395 .......................................................17
BS ISO 5468 .......................................................29
BS ISO 7637 .......................................................37
BS ISO 7919 .......................................................17
BS ISO 8178 .................................................19, 22
BS ISO 8407 .................................................17, 32
BS ISO 8820 .......................................................37
BS ISO 10643 .....................................................17
BS ISO 10770 .....................................................17
BS ISO 10816 ...............................................17, 32
BS ISO 10975 .....................................................17
BS ISO 11012 .....................................................17
BS ISO 11451 .....................................................37
BS ISO 11452 .....................................................37
BS ISO 11898 .....................................................38
BS ISO 13041 .....................................................38
BS ISO 13985 .....................................................38
BS ISO 16063 ...............................................18, 32
BS ISO 16750 .....................................................38
BS ISO 17832 .....................................................18
BS ISO 19072 .....................................................38
BS ISO 21849 .....................................................38
BS ISO 22089 .....................................................18
BS ISO 22915 .....................................................18
BS ISO 24497 .....................................................38
BS ISO 24631 ...............................................18, 19
DD ISO/TS 21220 ................................................19
DD ISO/TS 24817 ................................................38
PD 6433 .............................................................29
PD 6439 .............................................................29
PD 6510 .............................................................31
PD 8010 .............................................................30
PD ISO/TR 10809 ................................................19
BS 2B 23 .............................................................20
BS B 23 ...............................................................20
BS 2B 24 .............................................................20
BS B 24 ...............................................................20
BS 3B 25 .............................................................20
BS 2B 25 .............................................................20
BS 2B 26 .............................................................20
BS 3B 26 .............................................................20
BS 3B 27 .............................................................20
BS 2B 27 .............................................................20
BS 3B 28 .............................................................20
BS 2B 28 .............................................................20
BS 3B 29 .............................................................20
BS 2B 29 .............................................................20
Update Standards Jan 2010 Prices may be subject to change. 5
British Standards – Quick Reference Guide continued...
BS EN ISO 7784 ..................................................35
BS EN ISO 8501 ..................................................35
BS EN ISO 8504 ..................................................35
BS EN ISO 9073 ..................................................14
BS EN ISO 9117 ............................................14, 32
BS EN ISO 9706 ..................................................35
BS EN ISO 9902 ..................................................23
BS EN ISO 11111 ................................................23
BS EN ISO 11126 ................................................35
BS EN ISO 11138 ................................................15
BS EN ISO 11140 ................................................15
BS EN ISO 11357 ................................................15
BS EN ISO 11507 ................................................35
BS EN ISO 11997 ................................................35
BS EN ISO 12213 ................................................35
BS EN ISO 12944 ................................................35
BS EN 13060 ......................................................23
BS EN ISO 13479 ................................................15
BS EN 13523 ......................................................15
BS EN ISO 13803 ................................................35
BS EN 14180 ......................................................23
BS EN 14232 ................................................15, 32
BS EN ISO 14680 ................................................36
BS EN ISO 15181 ................................................36
BS EN ISO 15318 ................................................36
BS EN 15376 ......................................................23
BS EN ISO 15403 ................................................36
BS EN ISO 15528 ................................................36
BS EN 15749 ................................................16, 32
BS EN 15779 ......................................................16
BS EN ISO 16276 ................................................36
BS EN ISO 16773 ..........................................16, 36
BS EN ISO 17132 ................................................36
BS EN ISO 17872 ................................................36
BS EN 20287 ................................................12, 32
BS EN ISO 21227 ................................................37
BS EN ISO 28199 ................................................16
BS EN 29117 ................................................14, 32
DD ENV 14232 .............................................15, 32
BS ISO 2470 .................................................17, 32
BS ISO 2471 .......................................................17
BS ISO 2834 .......................................................17
BS ISO 3688 .......................................................37
BS ISO 4918 .......................................................32
BS ISO 6145 .......................................................17
BS ISO 7404 .................................................17, 32
BS ISO 10716 .....................................................37
BS ISO 11093 .....................................................37
BS ISO 11108 .....................................................37
BS ISO 12635 .....................................................18
BS ISO 13322 .....................................................38
BS ISO 13542 .....................................................38
BS ISO 15901 .....................................................38
BS ISO 17560 .....................................................29
BS ISO 20341 .....................................................29
BS ISO 23874 .....................................................38
BS ISO 26842 .....................................................19
BS ISO 28178 .....................................................19
PD ISO/TR 16268 ................................................19
PD ISO/TR 24699 ................................................19
PD 0028 .............................................................29
PD 6505 .............................................................31
PD 6631 .............................................................29
PD 6777 .............................................................29
Management systems
BS 350 ................................................................24
BS 4899 ..............................................................31
BS ISO 22514 .....................................................18
PD 6461 .............................................................29
PD 7500 .............................................................29
PD 7501 .............................................................29
PD 7502 .............................................................30
PD 7503 .............................................................30
Materials and chemicals
BS 797 ................................................................25
BS 1428 ..............................................................25
BS 2000 .................................................16, 25, 26
BS 2543 ..............................................................26
BS 2782 ........................................................15, 26
BS 2975 ..............................................................26
BS 3129 ..............................................................30
BS 3483 ........................................................12, 31
BS 3680 ..............................................................33
BS 3900 ...........................................33, 34, 35, 36
BS 4499 ..............................................................33
BS 4747 ..............................................................33
BS 5248 ..............................................................26
BS 5252 ..............................................................26
BS 5867 ..............................................................27
BS 5898 ..............................................................33
BS 6127 ........................................................17, 32
BS 6806 ..............................................................28
BS 7030 ..............................................................33
BS 7034 ........................................................33, 34
BS 7079 ..............................................................35
BS 7114 ..............................................................30
BS 7332 ..............................................................30
BS 7463 ..............................................................34
BS 7709 ..............................................................34
BS 7956 ..............................................................28
BS 5252F ............................................................29
DD 234 ...............................................................34
DD CEN/TS 15749 ........................................16, 32
BS EN ISO 287 ..............................................12, 32
BS EN ISO 787 ..............................................12, 31
BS EN ISO 801 ....................................................34
BS EN 937 ..........................................................12
BS EN 973 ..........................................................12
BS EN ISO 1402 ..................................................12
BS EN 1405 ........................................................12
BS EN 1406 ........................................................12
BS EN 1422 ........................................................23
BS EN ISO 1524 ..................................................34
BS EN ISO 1890 ..................................................14
BS EN ISO 2808 ..................................................34
BS EN ISO 2812 ..................................................34
BS EN ISO 3678 ..................................................34
BS EN ISO 4623 ..................................................34
BS EN ISO 5267 ..................................................34
BS EN ISO 7579 ..................................................14
BS EN ISO 14402 ................................................36
BS EN ISO 14505 ................................................36
BS EN ISO 14607 ................................................15
BS EN ISO 14630 ................................................15
BS EN 14662 ......................................................29
BS EN 14884 ......................................................36
BS EN 15269 ......................................................15
BS EN ISO 15535 ................................................36
BS EN 15657 ......................................................16
BS EN ISO 15841 ................................................36
BS EN ISO 16000 ................................................29
BS EN ISO 16266 ................................................36
BS EN ISO 20776 ................................................37
BS EN ISO 21427 ................................................37
BS EN ISO 21649 ................................................16
BS EN ISO 22032 ................................................37
BS EN ISO 22674 ................................................37
BS EN 29052 ......................................................37
BS ISO 6107 .......................................................37
BS ISO 7176 .......................................................37
BS ISO 7199 .......................................................17
BS ISO 11564 .....................................................38
BS ISO 11632 .....................................................38
BS ISO 11663 .....................................................18
BS ISO 13959 .....................................................18
BS ISO 14242 .....................................................18
BS ISO 15553 .....................................................38
BS ISO 15674 .....................................................18
BS ISO 15675 .....................................................18
BS ISO 20282 .....................................................38
BS ISO 25518 .....................................................19
BS ISO 26722 .....................................................19
BS ISO 28077 .....................................................38
DD ISO/TS 5658 ..................................................37
DD ISO/TS 11080 ................................................19
PD 6503 .............................................................29
Information systems
BS 2979 ..............................................................26
BS 4280 ..............................................................26
BS 4811 ..............................................................26
BS 4812 ..............................................................26
BS 5605 ..............................................................27
BS 6371 ..............................................................27
BS 7014 ..............................................................28
BS 7581 ..............................................................28
BS EN ISO/IEC 19796 ....................................16, 22
BS EN ISO 2806 ..................................................34
BS EN ISO 3166 ..................................................34
BS ISO/IEC 9281 .................................................37
BS ISO 10303 .....................................................37
BS ISO 10754 .....................................................37
BS ISO/IEC 11693 ...............................................18
BS ISO/IEC TR 14759 ..........................................38
BS ISO 15511 .....................................................18
BS ISO/IEC 24713 ...............................................19
DD ISO/TS 22224 ................................................19
PD 0006 .............................................................29
PD 0016 .............................................................29
PD 0017 .............................................................29
PD 0018 .............................................................29
PD 0023 .............................................................29
British Standards – Quick Reference Guide continued...
6 Update Standards Jan 2010Prices may be subject to change.
BS 7668 ..............................................................28
BS 7697 ..............................................................28
BS 7709 ..............................................................34
BS 7801 ..............................................................28
BS 7805 ..............................................................28
BS 7854 ........................................................17, 32
BS 7855 ..............................................................28
BS 7856 ..............................................................28
BS 7881 ..............................................................31
BS 7899 ..............................................................28
BS 7935 ..............................................................28
BS 7956 ..............................................................28
BS 7971 ..............................................................28
BS 8000 ..............................................................28
BS 8008 ..............................................................28
BS 8102 ..............................................................12
BS 8103 ..............................................................12
BS 8204 ..............................................................29
BS 8409 ........................................................12, 32
BS 8427 ..............................................................29
BS 8428 ..............................................................29
BS 8468 ..............................................................12
BS 9000 ..............................................................31
BS 5252F ............................................................29
DD 180 ...............................................................29
DD 234 ...............................................................34
DD CEN/TS 14940 ..............................................19
DD CEN/TS 15606 ..............................................19
DD CEN/TS 15674 ..............................................36
DD CEN/TS 15675 ..............................................36
DD CEN/TS 15749 ........................................16, 32
BS EN ISO 140 ....................................................34
BS EN ISO 287 ..............................................12, 32
BS EN 455 ..........................................................12
BS EN 609 ..........................................................22
BS EN 778 ..........................................................12
BS EN ISO 787 ..............................................12, 31
BS EN 794 ..........................................................22
BS EN ISO 801 ....................................................34
BS EN ISO 927 ..............................................12, 32
BS EN 934 ..........................................................12
BS EN 937 ..........................................................12
BS EN 973 ..........................................................12
BS EN ISO/IEC 19796 ....................................16, 22
BS EN 1176 ........................................................32
BS EN 1218 ........................................................23
BS EN 1230 ........................................................12
BS EN ISO 1402 ..................................................12
BS EN 1405 ........................................................12
BS EN 1406 ........................................................12
BS EN 1422 ........................................................23
BS EN ISO 1524 ..................................................34
BS EN 1639 ........................................................14
BS EN 1640 ........................................................14
BS EN 1641 ........................................................14
BS EN 1642 ........................................................14
BS EN 1807 ........................................................23
BS EN 1870 ........................................................23
BS EN 1889 ........................................................23
BS EN ISO 1890 ..................................................14
BS EN 2240 ........................................................14
BS EN ISO 2692 ..................................................34
BS EN ISO 2740 ..................................................14
BS 4894 ..............................................................26
BS 4899 ..............................................................31
BS 4999 ..............................................................24
BS 5046 ..............................................................26
BS 5248 ..............................................................26
BS 5252 ..............................................................26
BS 5266 ..............................................................26
BS 5276 ........................................................26, 30
BS 5285 ..............................................................27
BS 5346 ..............................................................27
BS 5422 ..............................................................22
BS 5459 ..............................................................27
BS 5507 ..............................................................27
BS 5605 ..............................................................27
BS 5642 ..............................................................27
BS 5656 ..............................................................27
BS 5682 ..............................................................27
BS 5685 ..............................................................30
BS 5854 ..............................................................27
BS 5864 ..............................................................27
BS 5867 ..............................................................27
BS 5884 ..............................................................27
BS 5898 ..............................................................33
BS 5950 ........................................................24, 27
BS 5977 ..............................................................27
BS 6037 ..............................................................27
BS 6049 ..............................................................33
BS 6068 .....................................33, 34, 35, 36, 37
BS 6127 ........................................................17, 32
BS 6133 ..............................................................27
BS 6165 ..............................................................27
BS 6172 ..............................................................27
BS 6259 ..............................................................27
BS 6290 ..............................................................32
BS 6325 ..............................................................33
BS 6362 ..............................................................33
BS 6371 ..............................................................27
BS 6381 ..............................................................27
BS 6404 ..............................................................27
BS 6590 ..............................................................33
BS 6643 ..............................................................27
BS 6734 ..............................................................28
BS 6785 ..............................................................28
BS 6788 ..............................................................28
BS 6806 ..............................................................28
BS 6955 ........................................................18, 32
BS 6986 ..............................................................33
BS 6999 ..............................................................28
BS 7014 ..............................................................28
BS 7030 ..............................................................33
BS 7034 ........................................................33, 34
BS 7036 ..............................................................28
BS 7079 ..............................................................35
BS 7114 ..............................................................30
BS 7172 ..............................................................28
BS 7188 ..............................................................28
BS 7208 ..............................................................30
BS 7332 ..............................................................30
BS 7371 ..............................................................28
BS 7463 ..............................................................34
BS 7545 ........................................................17, 32
BS 7581 ..............................................................28
BS 7647 ..............................................................28
Alpha-numeric sequence of BritishStandards quoted in this issue
BS 41 ..................................................................24
BS 65 ..................................................................24
BS 131 ................................................................24
BS 275 ................................................................30
BS 308 ................................................................34
BS 350 ................................................................24
BS 460 ................................................................22
BS 493 ................................................................24
BS 567 ................................................................24
BS 598 ................................................................24
BS 641 ................................................................30
BS 797 ................................................................25
BS 822 ................................................................24
BS 835 ................................................................24
BS 842 ................................................................24
BS 870 ................................................................22
BS 1054 ..............................................................24
BS 1109 ..............................................................30
BS 1127 ..............................................................24
BS 1347 ..............................................................24
BS 1377 ........................................................24, 25
BS 1407 ..............................................................25
BS 1428 ..............................................................25
BS 1449 ..............................................................25
BS 1660 ..............................................................25
BS 1974 ..............................................................30
BS 2000 .................................................16, 25, 26
BS 2457 ..............................................................26
BS 2459 ..............................................................26
BS 2543 ..............................................................26
BS 2738 ..............................................................26
BS 2772 ..............................................................26
BS 2782 ........................................................15, 26
BS 2975 ..............................................................26
BS 2979 ..............................................................26
BS 3015 ........................................................17, 31
BS 3129 ..............................................................30
BS 3459 ..............................................................26
BS 3483 ........................................................12, 31
BS 3509 ..............................................................26
BS 3575 ..............................................................30
BS 3680 ..............................................................33
BS 3810 ..............................................................30
BS 3900 ...........................................33, 34, 35, 36
BS 4177 ..............................................................26
BS 4280 ..............................................................26
BS 4315 ..............................................................26
BS 4358 ..............................................................26
BS 4361 ........................................................31, 32
BS 4484 ..............................................................26
BS 4499 ..............................................................33
BS 4585 ........................................................12, 32
BS 4620 ..............................................................30
BS 4656 ..............................................................33
BS 4672 ..............................................................30
BS 4747 ..............................................................33
BS 4787 ..............................................................26
BS 4811 ..............................................................26
BS 4812 ..............................................................26
BS 4875 ..............................................................26
Alpha-numeric sequence of British Standards
8 Update Standards Jan 2010Prices may be subject to change.
BS EN 60598 ......................................................23
BS EN 60896 ................................................22, 32
BS EN 60950 ......................................................22
DD ENV 14232 .............................................15, 32
BS ISO 128 .........................................................37
BS ISO 230 .........................................................37
BS ISO 1920 .......................................................16
BS ISO 2041 .................................................17, 31
BS ISO 2470 .................................................17, 32
BS ISO 2471 .......................................................17
BS ISO 2834 .......................................................17
BS ISO 3688 .......................................................37
BS ISO 4190 .......................................................37
BS ISO 4229 .......................................................17
BS ISO 4395 .......................................................17
BS ISO 4918 .......................................................32
BS ISO 5468 .......................................................29
BS ISO 6107 .......................................................37
BS ISO 6145 .......................................................17
BS ISO 7176 .......................................................37
BS ISO 7199 .......................................................17
BS ISO 7404 .................................................17, 32
BS ISO 7637 .......................................................37
BS ISO 7919 .......................................................17
BS ISO 8178 .................................................19, 22
BS ISO 8407 .................................................17, 32
BS ISO 8587 .......................................................37
BS ISO 8820 .......................................................37
BS ISO/IEC 9281 .................................................37
BS ISO 10303 .....................................................37
BS ISO 10596 .....................................................17
BS ISO 10643 .....................................................17
BS ISO 10716 .....................................................37
BS ISO 10754 .....................................................37
BS ISO 10770 .....................................................17
BS ISO 10816 ...............................................17, 32
BS ISO 10975 .....................................................17
BS ISO 11012 .....................................................17
BS ISO 11056 .....................................................37
BS ISO 11093 .....................................................37
BS ISO 11108 .....................................................37
BS ISO 11451 .....................................................37
BS ISO 11452 .....................................................37
BS ISO 11564 .....................................................38
BS ISO 11632 .....................................................38
BS ISO 11663 .....................................................18
BS ISO/IEC 11693 ...............................................18
BS ISO 11898 .....................................................38
BS ISO 12635 .....................................................18
BS ISO 13041 .....................................................38
BS ISO 13322 .....................................................38
BS ISO 13542 .....................................................38
BS ISO 13959 .....................................................18
BS ISO 13985 .....................................................38
BS ISO 14242 .....................................................18
BS ISO 14401 .....................................................18
BS ISO/IEC TR 14759 ..........................................38
BS ISO 14813 .....................................................18
BS ISO 15394 .....................................................18
BS ISO 15511 .....................................................18
BS ISO 15553 .....................................................38
BS ISO 15674 .....................................................18
BS ISO 15675 .....................................................18
BS EN ISO 13803 ................................................35
BS EN ISO 13849 ................................................35
BS EN ISO 13850 ................................................35
BS EN 14023 ......................................................49
BS EN 14180 ......................................................23
BS EN ISO 14224 ................................................36
BS EN 14232 ................................................15, 32
BS EN ISO 14270 ................................................36
BS EN ISO 14272 ................................................36
BS EN ISO 14273 ................................................36
BS EN ISO 14402 ................................................36
BS EN ISO 14505 ................................................36
BS EN ISO 14607 ................................................15
BS EN ISO 14630 ................................................15
BS EN 14662 ......................................................29
BS EN ISO 14680 ................................................36
BS EN ISO 14731 ................................................36
BS EN 14884 ......................................................36
BS EN ISO 15011 ................................................15
BS EN ISO 15138 ................................................36
BS EN ISO 15156 ................................................15
BS EN ISO 15181 ................................................36
BS EN 15269 ......................................................15
BS EN ISO 15318 ................................................36
BS EN 15376 ......................................................23
BS EN ISO 15403 ................................................36
BS EN 15503 ......................................................15
BS EN ISO 15528 ................................................36
BS EN ISO 15535 ................................................36
BS EN 15657 ......................................................16
BS EN 15714 ......................................................16
BS EN 15749 ................................................16, 32
BS EN 15779 ......................................................16
BS EN ISO 15792 ................................................36
BS EN ISO 15841 ................................................36
BS EN ISO 15927 ................................................16
BS EN ISO 16000 ................................................29
BS EN ISO 16266 ................................................36
BS EN ISO 16276 ................................................36
BS EN ISO 16773 ..........................................16, 36
BS EN ISO 17132 ................................................36
BS EN ISO 17776 ................................................36
BS EN ISO 17872 ................................................36
BS EN ISO 19903 ................................................36
BS EN ISO 19904 ................................................37
BS EN 20287 ................................................12, 32
BS EN ISO 20776 ................................................37
BS EN ISO 21227 ................................................37
BS EN ISO 21427 ................................................37
BS EN ISO 21649 ................................................16
BS EN ISO 21952 ................................................37
BS EN ISO 22032 ................................................37
BS EN ISO 22674 ................................................37
BS EN 23907 ................................................14, 32
BS EN ISO 24598 ................................................37
BS EN ISO 24978 ................................................16
BS EN ISO 28139 ................................................16
BS EN ISO 28199 ................................................16
BS EN 29052 ......................................................37
BS EN 29117 ................................................14, 32
BS EN 60059 ......................................................23
BS EN 60384 ......................................................22
BS EN 60393 ................................................22, 32
BS EN ISO 2806 ..................................................34
BS EN ISO 2808 ..................................................34
BS EN ISO 2812 ..................................................34
BS EN 2955 ........................................................22
BS EN ISO 3059 ..................................................34
BS EN ISO 3166 ..................................................34
BS EN 3464 ........................................................14
BS EN 3660 ........................................................14
BS EN ISO 3678 ..................................................34
BS EN 3730 ........................................................14
BS EN ISO 3822 ..................................................34
BS EN ISO 3907 ............................................14, 32
BS EN 3987 ........................................................14
BS EN ISO 4049 ..................................................14
BS EN 4113 ........................................................14
BS EN 4114 ........................................................14
BS EN 4234 ........................................................14
BS EN ISO 4623 ..................................................34
BS EN ISO 5267 ..................................................34
BS EN ISO 5455 ..................................................34
BS EN ISO 5667 ..................................................34
BS EN ISO 5961 ..................................................34
BS EN ISO 6222 ..................................................35
BS EN ISO 7027 ..................................................35
BS EN ISO 7500 ..................................................35
BS EN ISO 7579 ..................................................14
BS EN ISO 7784 ..................................................35
BS EN ISO 7886 ..................................................14
BS EN ISO 7980 ..................................................35
BS EN ISO 8044 ..................................................35
BS EN ISO 8501 ..................................................35
BS EN ISO 8504 ..................................................35
BS EN ISO 9073 ..................................................14
BS EN ISO 9117 ............................................14, 32
BS EN ISO 9706 ..................................................35
BS EN ISO 9902 ..................................................23
BS EN ISO 9934 ..................................................35
BS EN ISO 9963 ..................................................35
BS EN 10269 ......................................................22
BS EN 10349 ......................................................14
BS EN ISO 10438 ................................................35
BS EN ISO 10441 ................................................35
BS EN ISO 11091 ................................................35
BS EN ISO 11111 ................................................23
BS EN ISO 11126 ................................................35
BS EN ISO 11138 ................................................15
BS EN ISO 11140 ................................................15
BS EN ISO 11357 ................................................15
BS EN ISO 11507 ................................................35
BS EN ISO 11810 ................................................15
BS EN ISO 11980 ................................................15
BS EN ISO 11997 ................................................35
BS EN ISO 12213 ................................................35
BS EN 12779 ......................................................23
BS EN ISO 12944 ................................................35
BS EN 13060 ......................................................23
BS EN ISO 13479 ................................................15
BS EN 13501 ......................................................23
BS EN ISO 13503 ................................................35
BS EN 13523 ......................................................15
BS EN ISO 13703 ................................................35
BS EN ISO 13704 ................................................35
BS EN ISO 13716 ................................................35
Alpha-numeric sequence of British Standards continued...
10 Update Standards Jan 2010Prices may be subject to change.
BS TA 39 .............................................................21
BS TA 40 .............................................................21
BS 2TA 40 ...........................................................21
BS TA 41 .............................................................21
BS 2TA 41 ...........................................................21
BS TA 42 .............................................................21
BS 2TA 42 ...........................................................21
BS 2TA 45 ...........................................................21
BS TA 45 .............................................................21
BS 2TA 46 ...........................................................21
BS TA 46 .............................................................21
BS 2TA 47 ...........................................................21
BS TA 47 .............................................................21
BS 2TA 48 ...........................................................21
BS TA 48 .............................................................21
BS TA 49 .............................................................21
BS 2TA 49 ...........................................................21
BS TA 50 .............................................................21
BS 2TA 50 ...........................................................21
BS 2TA 51 ...........................................................21
BS TA 51 .............................................................21
BS 2TA 52 ...........................................................21
BS TA 52 .............................................................21
BS 2TA 56 ...........................................................22
BS TA 56 .............................................................22
BS 2TA 57 ...........................................................22
BS TA 57 .............................................................22
BS TA 58 .............................................................22
BS 2TA 58 ...........................................................22
BS 2TA 59 ...........................................................22
BS TA 59 .............................................................22
BS 3TA 100 .........................................................22
BS 2TA 100 .........................................................22
BS AU 50 ............................................................38
BS AU 170 ..........................................................30
BS AU 206 ..........................................................38
BS AU 233 ..........................................................38
PAS 66 ................................................................22
NA to BS EN 1993 ...............................................12
BS B 24 ...............................................................20
BS 3B 25 .............................................................20
BS 2B 25 .............................................................20
BS 3B 26 .............................................................20
BS 2B 26 .............................................................20
BS 3B 27 .............................................................20
BS 2B 27 .............................................................20
BS 3B 28 .............................................................20
BS 2B 28 .............................................................20
BS 3B 29 .............................................................20
BS 2B 29 .............................................................20
BS 3B 30 .............................................................20
BS 2B 30 .............................................................20
BS 3B 31 .............................................................20
BS 2B 31 .............................................................20
BS 2B 32 .............................................................20
BS 3B 32 .............................................................20
BS 3B 33 .............................................................20
BS 2B 33 .............................................................20
BS L 170 .............................................................31
BS 5X 17 ............................................................31
BS HC 401 ..........................................................31
BS HC 402 ..........................................................31
BS 3HR 201 ........................................................20
BS 2HR 201 ........................................................20
BS 2HR 202 ........................................................20
BS 3HR 202 ........................................................20
BS 2HR 203 ........................................................20
BS HR 203 ..........................................................20
BS 2HR 204 ........................................................20
BS HR 204 ..........................................................20
BS HR 205 ..........................................................20
BS 2HR 205 ........................................................20
BS HR 206 ..........................................................20
BS 2HR 206 ........................................................20
BS 2HR 207 ........................................................20
BS HR 207 ..........................................................20
BS HR 208 ..........................................................20
BS 2HR 208 ........................................................20
BS SP 57 and 58 .................................................31
BS 2TA 1 .............................................................20
BS 3TA 1 .............................................................20
BS 2TA 2 .............................................................21
BS 3TA 2 .............................................................21
BS 2TA 6 .............................................................21
BS 3TA 6 .............................................................21
BS 3TA 7 .............................................................21
BS 2TA 7 .............................................................21
BS 3TA 10 ...........................................................21
BS 2TA 10 ...........................................................21
BS 3TA 11 ...........................................................21
BS 2TA 11 ...........................................................21
BS 3TA 12 ...........................................................21
BS 2TA 12 ...........................................................21
BS 3TA 13 ...........................................................21
BS 2TA 13 ...........................................................21
BS 3TA 21 ...........................................................21
BS 2TA 21 ...........................................................21
BS 3TA 28 ...........................................................21
BS 2TA 28 ...........................................................21
BS 2TA 38 ...........................................................21
BS TA 38 .............................................................21
BS 2TA 39 ...........................................................21
BS ISO 15901 .....................................................38
BS ISO 16063 ...............................................18, 32
BS ISO 16212 .....................................................38
BS ISO 16750 .....................................................38
BS ISO 16792 .....................................................38
BS ISO 17560 .....................................................29
BS ISO 17832 .....................................................18
BS ISO 19072 .....................................................38
BS ISO 20282 .....................................................38
BS ISO 20341 .....................................................29
BS ISO 21849 .....................................................38
BS ISO 22089 .....................................................18
BS ISO 22179 .....................................................18
BS ISO 22472 .....................................................38
BS ISO 22514 .....................................................18
BS ISO 22915 .....................................................18
BS ISO 23874 .....................................................38
BS ISO 24097 .....................................................18
BS ISO 24497 .....................................................38
BS ISO 24631 ...............................................18, 19
BS ISO/IEC 24713 ...............................................19
BS ISO 25518 .....................................................19
BS ISO 26722 .....................................................19
BS ISO 26842 .....................................................19
BS ISO 28077 .....................................................38
BS ISO 28178 .....................................................19
BS CECC 41000 ..................................................32
DD ISO/TS 5658 ..................................................37
DD ISO/TS 11080 ................................................19
DD ISO/TS 16610 ................................................38
DD ISO/TS 21220 ................................................19
DD ISO/TS 22224 ................................................19
DD ISO/TS 24817 ................................................38
PD CEN/TR 15894 ...............................................19
PD 0006 .............................................................29
PD 0016 .............................................................29
PD 0017 .............................................................29
PD 0018 .............................................................29
PD 0023 .............................................................29
PD 0028 .............................................................29
PD 6433 .............................................................29
PD 6439 .............................................................29
PD 6461 .............................................................29
PD 6503 .............................................................29
PD 6505 .............................................................31
PD 6510 .............................................................31
PD 6631 .............................................................29
PD 6682 .............................................................19
PD 6688 .............................................................19
PD 6777 .............................................................29
PD 7500 .............................................................29
PD 7501 .............................................................29
PD 7502 .............................................................30
PD 7503 .............................................................30
PD 8010 .............................................................30
PD ISO/TR 10809 ................................................19
PD ISO/TR 16268 ................................................19
PD ISO/TR 24699 ................................................19
PD CLC/TR 50373 ...............................................29
PD CLC/TR 50422 ...............................................29
BS B 23 ...............................................................20
BS 2B 23 .............................................................20
BS 2B 24 .............................................................20
Update Standards Jan 2010 Prices may be subject to change. 11
Alpha-numeric sequence of British Standards continued...
Help Us to Help
You!
Always quote your Customer Number
Don’t know your number?
Contact Customer Services
020 8996 9001
who will be happy to check it for you
BS EN ISO 927:2009Spices and condiments. Determination ofextraneous matter and foreign matter content
supersedes BS 4585-1:1983ISBN 978 0 580 57814 4£34.00 members, £68.00 non-members
AW/7
BS EN 934-3:2009Admixtures for concrete, mortar and grout.Admixtures for masonry mortar. Definitions,requirements, conformity and marking andlabelling
supersedes BS EN 934-3:2003ISBN 978 0 580 62627 2£42.00 members, £84.00 non-members
B/517/3
BS EN 937:2009Chemicals used for treatment of water intendedfor human consumption. Chlorine
supersedes BS EN 937:1999ISBN 978 0 580 58598 2£60.00 members, £120.00 non-members
CII/59
BS EN 973:2009Chemicals used for treatment of water intendedfor human consumption. Sodium chloride forregeneration of ion exchangers
supersedes BS EN 973:2002ISBN 978 0 580 65236 3£84.00 members, £168.00 non-members
CII/59
BS EN 1230-2:2009Paper and board intended to come into contactwith foodstuffs. Sensory analysis. Off-flavour(taint)
supersedes BS EN 1230-2:2001ISBN 978 0 580 61492 7£42.00 members, £84.00 non-members
CW/47/3
BS EN ISO 1402:2009Rubber and plastics hoses and hose assemblies.Hydrostatic testing
supersedes BS EN ISO 1402:1997ISBN 978 0 580 58411 4£42.00 members, £84.00 non-members
PRI/66/-/4
BS EN 1405:2009Chemicals used for treatment of water intendedfor human consumption. Sodium alginate
supersedes BS EN 1405:1998ISBN 978 0 580 58595 1£42.00 members, £84.00 non-members
CII/59
BS EN 1406:2009Chemicals used for treatment of water intendedfor human consumption. Modified starches
supersedes BS EN 1406:1998ISBN 978 0 580 58596 8£42.00 members, £84.00 non-members
CII/59
BS 8468-3.2:2009Respiratory protective devices for use againstchemical, biological, radiological and nuclear(CBRN) agents. Air-purifying devicesincorporating a hood for escape. Specification
no current standard is supersededISBN 978 0 580 63993 7£69.00 members, £138.00 non-members
PH/4
NA to BS EN 1993-6:2007UK National Annex to Eurocode 3. Design ofsteel structures. Crane supporting structures
no current standard is supersededISBN 978 0 580 54980 9£34.00 members, £68.00 non-members
B/525/31
BS EN PUBLICATIONS
The following are British Standardimplementations of the English languageversions of European Standards (ENs).
BSI has an obligation to publish all ENsand to withdraw any conflicting BritishStandards. This has led to a series ofstandards, BS ENs, using the EN number.
Note: The date referenced in theidentifier is the date of the Europeanstandard.
BS EN ISO 287:2009Paper and board. Determination of moisturecontent of a lot. Oven-drying method
supersedes BS EN 20287:1994ISBN 978 0 580 59137 2£42.00 members, £84.00 non-members
PAI/11
BS EN 455-2:2009Medical gloves for single use. Requirements andtesting for physical properties
supersedes BS EN 455-2:2000ISBN 978 0 580 61712 6£34.00 members, £68.00 non-members
CH/205/3
BS EN 778:2009Domestic gas-fired forced convection air heatersfor space heating not exceeding a net heatinput of 70 kW, without a fan to assisttransportation of combustion air and/orcombustion products
supersedes BS EN 778:1998ISBN 978 0 580 58603 3£109.00 members, £218.00 non-members
GSE/20
BS EN ISO 787-7:2009General methods of test for pigments andextenders. Determination of residue on sieve.Water method. Manual procedure
supersedes BS 3483-B3:1982ISBN 978 0 580 63618 9£34.00 members, £68.00 non-members
STI/1
BRITISH STANDARDS
The following British Standardpublications are available fromBSI Customer Services (see ’How to order’on page 2).
The publications listed below are newand revised British Standards that weremade available last month.
An existing BSI publication bearing anumber identical to one announcedbelow is automatically withdrawn unlessstated otherwise.
In all other cases of supersession, detailsare given and a corresponding entryappears in the ’British Standardswithdrawn’ section.
BRITISH STANDARD IMPLEMENTATIONSWILL BE SUPPLIED IN PREFERENCE TOEUROPEAN OR INTERNATIONALSTANDARDS, UNLESS OTHERWISEREQUESTED.
Please order by the British Standardreference not the ISBN number.
BS 2000 series standards are also availablefrom:–Library of the Energy Institute61 New Cavendish StreetLondon W1G 7ARTel: 020 7467 7100Fax: 020 7255 1472Email: [email protected] this series, member pricing isapplicable to BSI and Energy Institutemembers.
BS 8102:2009Code of practice for protection of belowground structures against water from theground
supersedes BS 8102:1990ISBN 978 0 580 59399 4£79.00 members, £158.00 non-members
B/526
BS 8103-3:2009Structural design of low-rise buildings. Code ofpractice for timber floors and roofs for housing
supersedes BS 8103-3:1996ISBN 978 0 580 55897 9£124.00 members, £248.00 non-members
B/204/2
BS 8409:2009Fully enclosed play facilities. Code of practice
supersedes BS 8409:2002ISBN 978 0 580 65206 6£60.00 members, £120.00 non-members
SW/65/5
British Standards
12 Update Standards Jan 2010Prices may be subject to change.
BS EN 4114:2009Aerospace series. Clamps, loop (’’P’’ type) inaluminium alloy with rubber cushioning.Dimensions, masses
supersedes BS EN 4114:2001ISBN 978 0 580 59238 6£34.00 members, £68.00 non-members
ACE/69
BS EN 4234:2009Aerospace series. Clamps, worm drive.Dimensions, masses
supersedes BS EN 4234:2006ISBN 978 0 580 59240 9£34.00 members, £68.00 non-members
ACE/69
BS EN ISO 7579:2009Dyestuffs. Determination of solubility in organicsolvents. Gravimetric and photometric methods
supersedes BS EN ISO 7579:1997ISBN 978 0 580 62859 7£42.00 members, £84.00 non-members
STI/1
BS EN ISO 7886-3:2009Sterile hypodermic syringes for single use. Auto-disable syringes for fixed-dose immunization
supersedes BS EN ISO 7886-3:2005ISBN 978 0 580 67785 4£60.00 members, £120.00 non-members
CH/84
BS EN ISO 7886-4:2009Sterile hypodermic syringes for single use.Syringes with re-use prevention feature
supersedes BS EN ISO 7886-4:2006ISBN 978 0 580 67783 0£60.00 members, £120.00 non-members
CH/84
BS EN ISO 9073-5:2008Textiles. Test methods for nonwovens.Determination of resistance to mechanicalpenetration (ball burst procedure)
no current standard is supersededISBN 978 0 580 57749 9£42.00 members, £84.00 non-members
TCI/24
BS EN ISO 9117-1:2009Paints and varnishes. Drying tests.Determination of through-dry state andthrough-dry time
supersedes BS EN 29117:1992ISBN 978 0 580 59288 1£34.00 members, £68.00 non-members
STI/10
BS EN 10349:2009Steel castings. Austenitic manganese steelcastings
no current standard is supersededISBN 978 0 580 59025 2£34.00 members, £68.00 non-members
ISE/6
BS EN 3660-036:2009Aerospace series. Cable outlet accessories forcircular and rectangular electrical and opticalconnectors. Spacer pad for cable outlet, style Z.Product standard
no current standard is superseded
ISBN 978 0 580 61330 2£34.00 members, £68.00 non-members
ACE/6
BS EN 3660-037:2009Aerospace series. Cable outlet accessories forcircular and rectangular electrical and opticalconnectors. Bushing strip, elastomer, for cableoutlet, style Z. Product standard
no current standard is superseded
ISBN 978 0 580 61334 0£34.00 members, £68.00 non-members
ACE/6
BS EN 3730:2009Aerospace series. Clamps, saddle fixed andsliding version in aluminium alloy with rubbercushioning. Dimension, masses
supersedes BS EN 3730:2001
ISBN 978 0 580 67710 6£42.00 members, £84.00 non-members
ACE/6
BS EN ISO 3907:2009Hardmetals. Determination of total carbon.Gravimetric method
supersedes BS EN 23907:1993
ISBN 978 0 580 56454 3£34.00 members, £68.00 non-members
ISE/65
BS EN 3987:2009Aerospace series. Test methods for metallicmaterials. Constant amplitude force-controlledhigh cycle fatigue testing
no current standard is superseded
ISBN 978 0 580 62413 1£60.00 members, £120.00 non-members
ACE/61/-/6
BS EN ISO 4049:2009Dentistry. Polymer-based restorative materials
supersedes BS EN ISO 4049:2000
ISBN 978 0 580 59576 9£69.00 members, £138.00 non-members
CH/106/1
BS EN 4113:2009Aerospace series. Clamps, loop (“P” type) incorrosion resisting steel, passivated, with rubbercushioning. Dimensions, masses
supersedes BS EN 4113:2001
ISBN 978 0 580 59235 5£34.00 members, £68.00 non-members
ACE/69
BS EN 1639:2009Dentistry. Medical devices for dentistry.Instruments
supersedes BS EN 1639:2004ISBN 978 0 580 63624 0£42.00 members, £84.00 non-members
CH/106/4
BS EN 1640:2009Dentistry. Medical devices for dentistry.Equipment
supersedes BS EN 1640:2004ISBN 978 0 580 63626 4£42.00 members, £84.00 non-members
CH/106/4
BS EN 1641:2009Dentistry. Medical devices for dentistry.Materials
supersedes BS EN 1641:2004ISBN 978 0 580 63627 1£34.00 members, £68.00 non-members
CH/106/2
BS EN 1642:2009Dentistry. Medical devices for dentistry. Dentalimplants
supersedes BS EN 1642:2004ISBN 978 0 580 63628 8£34.00 members, £68.00 non-members
CH/106/8
BS EN ISO 1890:2009Reinforcement yarns. Determination of twist
supersedes BS EN ISO 1890:1997ISBN 978 0 580 65488 6£34.00 members, £68.00 non-members
PRI/42
BS EN 2240-001:2009Aerospace series. Lamps, incandescent.Technical specification
no current standard is supersededISBN 978 0 580 68341 1£34.00 members, £68.00 non-members
ACE/6
BS EN ISO 2740:2009Sintered metal materials, excluding hardmetals.Tensile test pieces
supersedes BS EN ISO 2740:2007ISBN 978 0 580 62212 0£34.00 members, £68.00 non-members
ISE/65
BS EN 3464:2009Aerospace series. Titanium alloy TI-P64001 (Ti-6AI-4V). Annealed. Plate. 6 mm < a ≤ 100 m
no current standard is supersededISBN 978 0 580 68932 1£34.00 members, £68.00 non-members
ACE/61/-/49
BS EN Publications continued...
14 Update Standards Jan 2010Prices may be subject to change.
BS EN ISO 15011-3:2009Health and safety in welding and alliedprocesses. Laboratory method for samplingfume and gases. Determination of ozoneemission rate during arc welding
supersedes BS EN ISO 15011-3:2002 which waswithdrawn in 2005ISBN 978 0 580 55640 1£60.00 members, £120.00 non-members
WEE/40
BS EN ISO 15156-1:2009Petroleum and natural gas industries. Materialsfor use in H2S-containing environments in oiland gas production. General principles forselection of cracking-resistant materials
supersedes BS EN ISO 15156-1:2002ISBN 978 0 580 66740 4£42.00 members, £84.00 non-members
PSE/17/-/7
BS EN ISO 15156-2:2009Petroleum and natural gas industries. Materialsfor use in H2S-containing environments in oiland gas production. Cracking-resistant carbonand low-alloy steels, and the use of cast irons
supersedes BS EN ISO 15156-2:2003ISBN 978 0 580 66741 1£84.00 members, £168.00 non-members
PSE/17/-/7
BS EN ISO 15156-3:2009Petroleum and natural gas industries. Materialsfor use in H2S-containing environments in oiland gas production. Cracking-resistant CRAs(corrosion-resistant alloys) and other alloys
supersedes BS EN ISO 15156-3:2003ISBN 978 0 580 66742 8£90.00 members, £180.00 non-members
PSE/17/-/7
BS EN 15269-7:2009Extended application of test results for fireresistance and/or smoke control for door,shutter and openable window assemblies,including their elements of building hardware.Fire resistance for steel sliding doorsets
no current standard is supersededISBN 978 0 580 56359 1£90.00 members, £180.00 non-members
FSH/22/5
BS EN 15503:2009Garden equipment. Garden blowers, vacuumsand blower/vacuums. Safety
no current standard is supersededISBN 978 0 580 56762 9£69.00 members, £138.00 non-members
AGE/20
BS EN ISO 13479:2009Polyolefin pipes for the conveyance of fluids.Determination of resistance to crackpropagation. Test method for slow crackgrowth on notched pipes
supersedes the dual numbered standardBS EN ISO 13479:1997, BS 2782-11:Method1109N:1997ISBN 978 0 580 63079 8£42.00 members, £84.00 non-members
PRI/88/4
BS EN 13523-27:2009Coil coated metals. Test methods. Resistance tohumid poultice (Cataplasm test)
no current standard is supersededISBN 978 0 580 58893 8£34.00 members, £68.00 non-members
STI/27
BS EN 14232:2009Advanced technical ceramics. Terms, definitionsand abbreviations
supersedes DD ENV 14232:2003ISBN 978 0 580 63842 8£90.00 members, £180.00 non-members
RPI/13
BS EN ISO 14607:2009Non-active surgical implants. Mammaryimplants. Particular requirements
supersedes BS EN ISO 14607:2007ISBN 978 0 580 68133 2£69.00 members, £138.00 non-members
CH/150
BS EN ISO 14630:2009Non-active surgical implants. Generalrequirements
supersedes BS EN ISO 14630:2008ISBN 978 0 580 68134 9£60.00 members, £120.00 non-members
CH/150
BS EN ISO 15011-1:2009Health and safety in welding and alliedprocesses. Laboratory method for samplingfume and gases. Determination of fumeemission rate during arc welding and collectionof fume for analysis
supersedes BS EN ISO 15011-1:2002ISBN 978 0 580 55938 9£60.00 members, £120.00 non-members
WEE/40
BS EN ISO 15011-2:2009Health and safety in welding and alliedprocesses. Laboratory method for samplingfume and gases. Determination of the emissionrates of carbon monoxide (CO), carbon dioxide(CO2), nitrogen monoxide (NO) and nitrogendioxide (NO2) during arc welding, cutting andgouging
supersedes BS EN ISO 15011-2:2003ISBN 978 0 580 55939 6£60.00 members, £120.00 non-members
WEE/40
BS EN ISO 11138-2:2009Sterilization of health care products. Biologicalindicators. Biological indicators for ethyleneoxide sterilization processes
supersedes BS EN ISO 11138-2:2006ISBN 978 0 580 65849 5£34.00 members, £68.00 non-members
LBI/35
BS EN ISO 11138-3:2009Sterilization of health care products. Biologicalindicators. Biological indicators for moist heatsterilization processes
supersedes BS EN ISO 11138-3:2006ISBN 978 0 580 65850 1£42.00 members, £84.00 non-members
LBI/35
BS EN ISO 11140-1:2009Sterilization of health care products. Chemicalindicators. General requirements
supersedes BS EN ISO 11140-1:2005ISBN 978 0 580 65847 1£69.00 members, £138.00 non-members
LBI/35
BS EN ISO 11357-1:2009Plastics. Differential scanning calorimetry (DSC).General principles
supersedes BS EN ISO 11357-1:1997ISBN 978 0 580 63088 0£69.00 members, £138.00 non-members
PRI/21
BS EN ISO 11810-1:2009Lasers and laser-related equipment. Testmethod and classification for the laserresistance of surgical drapes and/or patientprotective covers. Primary ignition andpenetration
supersedes BS EN ISO 11810-1:2005ISBN 978 0 580 65614 9£42.00 members, £84.00 non-members
CPW/172/9
BS EN ISO 11810-2:2009Lasers and laser-related equipment. Testmethod and classification for the laser-resistance of surgical drapes and/or patient-protective covers. Secondary ignition
supersedes BS EN ISO 11810-2:2007ISBN 978 0 580 65203 5£42.00 members, £84.00 non-members
CPW/172/9
BS EN ISO 11980:2009Ophthalmic optics. Contact lenses and contactlens care products. Guidance for clinicalinvestigations
supersedes BS EN ISO 11980:1998ISBN 978 0 580 55758 3£69.00 members, £138.00 non-members
CH/172/9
Update Standards Jan 2010 Prices may be subject to change. 15
To order visit
www.bsigroup.com/shop
BS EN ISO 28199-2:2009Paints and varnishes. Evaluation of properties ofcoating systems related to the applicationprocess. Colour stability, process hiding power,re-dissolving, overspray absorption, wetting,surface texture and mottling
no current standard is supersededISBN 978 0 580 59285 0£42.00 members, £84.00 non-members
STI/10
BS EN ISO 28199-3:2009Paints and varnishes. Evaluation of properties ofcoating systems related to the applicationprocess. Visual assessment of sagging,formation of bubbles, pinholing and hidingpower
no current standard is supersededISBN 978 0 580 59286 7£42.00 members, £84.00 non-members
STI/10
BS ENs IMPLEMENTED BYAMENDMENT
For the standards listed below see alsothe ’Amendments to British Standards’and ’Updated British Standards’ sectionsof this issue of Update Standards.
BS EN ISO/IEC 19796-1:2009Information technology. Learning, educationand training. Quality management, assuranceand metrics. General approach
IST/43
Implementation of European Standard EN ISO/IEC19796-1 by amendment to BS ISO/IEC 19796-1:2005
BS IMPLEMENTATIONS
BS Implementations comprise the ISO orIEC text without any national deviationand with front and back cover indicatingthe UK committee responsible.No other information will normally beadded.
Note: The date referenced in theidentifier is the date of the internationalstandard.
BS ISO 1920-8:2009Testing of concrete. Determination of thedrying shrinkage of concrete for samplesprepared in the field or in the laboratory
no current standard is supersededISBN 978 0 580 59476 2£60.00 members, £120.00 non-members
B/517/1
BS ISO 1920-9:2009Testing of concrete. Determination of creep ofconcrete cylinders in compression
no current standard is supersededISBN 978 0 580 59475 5£42.00 members, £84.00 non-members
B/517/1
BS EN ISO 15927-3:2009Hygrothermal performance of buildings.Calculation and presentation of climatic data.Calculation of a driving rain index for verticalsurfaces from hourly wind and rain data
no current standard is supersededISBN 978 0 580 56101 6£42.00 members, £84.00 non-members
B/540/8
BS EN ISO 16773-3:2009Paints and varnishes. Electrochemicalimpedance spectroscopy (EIS) on high-impedance coated specimens. Processing andanalysis of data from dummy cells
no current standard is supersededISBN 978 0 580 59287 4£42.00 members, £84.00 non-members
STI/10
BS EN ISO 16773-4:2009Paints and varnishes. Electrochemicalimpedance spectroscopy (EIS) on high-impedance coated specimens. Examples ofspectra of polymer-coated specimens
no current standard is supersededISBN 978 0 580 63955 5£60.00 members, £120.00 non-members
STI/10
BS EN ISO 21649:2009Needle-free injectors for medical use.Requirements and test methods
supersedes BS EN ISO 21649:2006ISBN 978 0 580 67782 3£69.00 members, £138.00 non-members
CH/84
BS EN ISO 24978:2009Intelligent transport systems. ITS Safety andemergency messages using any availablewireless media. Data registry procedures
no current standard is supersededISBN 978 0 580 56103 0£90.00 members, £180.00 non-members
EPL/278
BS EN ISO 28139:2009Agricultural and forestry machinery. Knapsackcombustion engine-driven mistblowers. Safetyrequirements
no current standard is supersededISBN 978 0 580 59914 9£60.00 members, £120.00 non-members
AGE/15
BS EN ISO 28199-1:2009Paints and varnishes. Evaluation of properties ofcoating systems related to the applicationprocess. Relevant vocabulary and preparation oftest panels
no current standard is supersededISBN 978 0 580 59284 3£60.00 members, £120.00 non-members
STI/10
BS EN 15657-1:2009Acoustic properties of building elements and ofbuildings. Laboratory measurement of airborneand structure borne sound from buildingequipment. Simplified cases where theequipment mobilities are much higher than thereceiver mobilities, taking whirlpool baths as anexample
no current standard is supersededISBN 978 0 580 58350 6£60.00 members, £120.00 non-members
EH/1/6
BS EN 15714-1:2009Industrial valves. Actuators. Terminology anddefinitions
no current standard is supersededISBN 978 0 580 54736 2£34.00 members, £68.00 non-members
PSE/18/5
BS EN 15714-2:2009Industrial valves. Actuators. Electric actuatorsfor industrial valves. Basic requirements
no current standard is supersededISBN 978 0 580 54840 6£60.00 members, £120.00 non-members
PSE/18/5
BS EN 15714-3:2009Industrial valves. Actuators. Pneumatic part-turnactuators for industrial valves. Basicrequirements
no current standard is supersededISBN 978 0 580 54843 7£60.00 members, £120.00 non-members
PSE/18/5
BS EN 15714-4:2009Industrial valves. Actuators. Hydraulic part-turnactuators for industrial valves. Basicrequirements
no current standard is supersededISBN 978 0 580 54844 4£60.00 members, £120.00 non-members
PSE/18/5
BS EN 15749:2009Fertilizers. Determination of sulfates contentusing three different methods
supersedes DD CEN/TS 15749:2008ISBN 978 0 580 66425 0£60.00 members, £120.00 non-members
CII/37
BS EN 15779:2009(BS 2000-578:2009)Petroleum products and fat and oil derivates.Fatty acid methyl esters (FAME) for dieselengines. Determination of polyunsaturated (≥ 4 double bonds) fatty acid methyl esters(PUFA) by gas chromatography
no current standard is supersededISBN 978 0 580 61775 1£19.50 members, £26.00 non-members
PTI/13
Available from the Institute of Petroleum, see the’British Standards’ section foreword for orderinginformation
BS EN Publications continued...
16 Update Standards Jan 2010Prices may be subject to change.
BS ISO 10596:2009Ships and marine technology. Marine wind vaneand anemometers
no current standard is supersededISBN 978 0 580 61904 5£42.00 members, £84.00 non-members
EPL/80
BS ISO 10643:2009Dimensions of accessories for cutting tools andtheir attachments
no current standard is supersededISBN 978 0 580 63769 8£42.00 members, £84.00 non-members
MTE/18
BS ISO 10770-1:2009Hydraulic fluid power. Electrically modulatedhydraulic control valves. Test methods for four-port directional flow-control valves
supersedes BS ISO 10770-1:1998ISBN 978 0 580 60277 1£69.00 members, £138.00 non-members
MCE/18/-/8
BS ISO 10816-2:2009Mechanical vibration. Evaluation of machinevibration by measurements on non-rotatingparts. Land-based steam turbines andgenerators in excess of 50 MW with normaloperating speeds of 1500 r/min, 1800 r/min,3000 r/min and 3600 r/min
supersedes BS ISO 10816-2:2001ISBN 978 0 580 65269 1£60.00 members, £120.00 non-members
GME/21/5
BS ISO 10816-4:2009Mechanical vibration. Evaluation of machinevibration by measurements on non-rotatingparts. Gas turbine sets with fluid-film bearings
supersedes BS 7854-4:1998ISBN 978 0 580 64809 0£60.00 members, £120.00 non-members
GME/21/5
BS ISO 10975:2009Tractors and machinery for agriculture. Auto-guidance systems for operator-controlledtractors and self-propelled machines. Safetyrequirements
no current standard is supersededISBN 978 0 580 64106 0£34.00 members, £68.00 non-members
AGE/6
BS ISO 11012:2009Heavy commercial vehicles and buses. Open-loop test methods for the quantification of on-centre handling. Weave test and transition test
no current standard is supersededISBN 978 0 580 64528 0£60.00 members, £120.00 non-members
AUE/15
BS ISO 7199:2009Cardiovascular implants and artificial organs.Blood-gas exchangers (oxygenators)
no current standard is superseded
ISBN 978 0 580 62452 0£42.00 members, £84.00 non-members
CH/150/2
BS ISO 7404-2:2009Methods for the petrographic analysis of coals.Methods of preparing coal samples
supersedes BS 6127-2:1982
ISBN 978 0 580 56502 1£60.00 members, £120.00 non-members
PTI/16
BS ISO 7404-3:2009Methods for the petrographic analysis of coals.Method of determining maceral groupcomposition
supersedes BS 6127-3:1995
ISBN 978 0 580 56503 8£42.00 members, £84.00 non-members
PTI/16
BS ISO 7404-5:2009Methods for the petrographic analysis of coals.Method of determining microscopically thereflectance of vitrinite
supersedes BS 6127-5:1995
ISBN 978 0 580 56505 2£60.00 members, £120.00 non-members
PTI/16
BS ISO 7919-2:2009Mechanical vibration. Evaluation of machinevibration by measurements on rotating shafts.Land-based steam turbines and generators inexcess of 50 MW with normal operating speedsof 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min
supersedes BS ISO 7919-2:2001
ISBN 978 0 580 65268 4£60.00 members, £120.00 non-members
GME/21/5
BS ISO 7919-4:2009Mechanical vibration. Evaluation of machinevibration by measurements on rotating shafts.Gas turbine sets with fluid-film bearings
supersedes BS ISO 7919-4:1996
ISBN 978 0 580 64808 3£60.00 members, £120.00 non-members
GME/21/5
BS ISO 8407:2009Corrosion of metals and alloys. Removal ofcorrosion products from corrosion testspecimens
supersedes BS 7545:1991
ISBN 978 0 580 55725 5£42.00 members, £84.00 non-members
ISE/NFE/8
BS ISO 2041:2009Mechanical vibration, shock and conditionmonitoring. Vocabulary
supersedes BS 3015:1991ISBN 978 0 580 60285 6£84.00 members, £168.00 non-members
GME/21/1
BS ISO 2470-1:2009Paper, board and pulps. Measurement of diffuseblue reflectance factor. Indoor daylightconditions (ISO brightness)
supersedes BS ISO 2470:1999ISBN 978 0 580 55161 1£42.00 members, £84.00 non-members
PAI/11
BS ISO 2470-2:2008Paper, board and pulps. Measurement of diffuseblue reflectance factor. Outdoor daylightconditions (D65 brightness)
no current standard is supersededISBN 978 0 580 58712 2£42.00 members, £84.00 non-members
PAI/11
BS ISO 2471:2008Paper and board. Determination of opacity(paper backing). Diffuse reflectance method
supersedes BS ISO 2471:1998ISBN 978 0 580 55162 8£42.00 members, £84.00 non-members
PAI/11
BS ISO 2834-3:2008Graphic technology. Laboratory preparation oftest prints. Screen printing inks
no current standard is supersededISBN 978 0 580 55011 9£42.00 members, £84.00 non-members
PAI/43
BS ISO 4229:2009Assembly tools for screws and nuts. Single-headengineer’s wrenches for lower torqueapplications. Maximum outside dimensions ofheads and test torques
no current standard is supersededISBN 978 0 580 61830 7£34.00 members, £68.00 non-members
MTE/15
BS ISO 4395:2009Fluid power systems and components. Cylinderpiston rod end types and dimensions
no current standard is supersededISBN 978 0 580 60897 1£42.00 members, £84.00 non-members
MCE/18/-/3
BS ISO 6145-5:2009Gas analysis. Preparation of calibration gasmixtures using dynamic volumetric methods.Capillary calibration devices
supersedes BS ISO 6145-5:2001ISBN 978 0 580 63653 0£60.00 members, £120.00 non-members
PTI/15
Update Standards Jan 2010 Prices may be subject to change. 17
BS ISO 22179:2009Intelligent transport systems. Full speed rangeadaptive cruise control (FSRA) systems.Performance requirements and test procedures
no current standard is supersededISBN 978 0 580 57265 4£69.00 members, £138.00 non-members
EPL/278
BS ISO 22514-1:2009Statistical methods in process management.Capability and performance. General principlesand concepts
no current standard is supersededISBN 978 0 580 54842 0£69.00 members, £138.00 non-members
SS/4
BS ISO 22915-7:2009Industrial trucks. Verification of stability.Bidirectional and multidirectional trucks
no current standard is supersededISBN 978 0 580 55393 6£60.00 members, £120.00 non-members
MHE/7
BS ISO 22915-21:2009Industrial trucks. Verification of stability. Order-picking trucks with operator position elevatingabove 1200mm
no current standard is supersededISBN 978 0 580 62103 1£42.00 members, £84.00 non-members
MHE/7
BS ISO 24097-1:2009Intelligent transport systems. Using web services(machine-machine delivery) for ITS servicedelivery. Realization of interoperable webservices
no current standard is supersededISBN 978 0 580 58431 2£84.00 members, £168.00 non-members
EPL/278
BS ISO 24631-1:2009Radiofrequency identification of animals.Evaluation of conformance of RFIDtransponders with ISO 11784 and ISO 11785(including granting and use of a manufacturercode)
no current standard is supersededISBN 978 0 580 57199 2£60.00 members, £120.00 non-members
AGE/6/1
BS ISO 24631-2:2009Radiofrequency identification of animals.Evaluation of conformance of RFID transceiverswith ISO 11784 and ISO 11785
no current standard is supersededISBN 978 0 580 57200 5£60.00 members, £120.00 non-members
AGE/6/1
BS ISO 15394:2009Packaging. Bar code and two-dimensionalsymbols for shipping, transport and receivinglabels
supersedes BS ISO 15394:2000
ISBN 978 0 580 57285 2£84.00 members, £168.00 non-members
PKW/0
BS ISO 15511:2009Information and documentation. Internationalstandard identifier for libraries and relatedorganizations (ISIL)
supersedes BS ISO 15511:2003
ISBN 978 0 580 68301 5£42.00 members, £84.00 non-members
IDT/2/7
BS ISO 15674:2009Cardiovascular implants and artificial organs.Hard-shell cardiotomy/venous reservoir systems(with/without filter) and soft venous reservoirbags
supersedes BS ISO 15674:2001
ISBN 978 0 580 62454 4£42.00 members, £84.00 non-members
CH/150/2
BS ISO 15675:2009Cardiovascular implants and artificial organs.Cardiopulmonary bypass systems. Arterial bloodline filters
supersedes BS ISO 15675:2001
ISBN 978 0 580 62455 1£42.00 members, £84.00 non-members
CH/150/2
BS ISO 16063-31:2009Methods for the calibration of vibration andshock transducers. Testing of transversevibration sensitivity
supersedes BS 6955-11:1994
ISBN 978 0 580 63215 0£60.00 members, £120.00 non-members
GME/21/2
BS ISO 17832:2009Non-parallel steel wire and cords for tyrereinforcement
no current standard is superseded
ISBN 978 0 580 59984 2£42.00 members, £84.00 non-members
ISE/71
BS ISO 22089:2009Aerospace. Hydraulic power transfer units.General specifications
no current standard is superseded
ISBN 978 0 580 62835 1£84.00 members, £168.00 non-members
ACE/69
BS ISO 11663:2009Quality of dialysis fluid for haemodialysis andrelated therapies
no current standard is supersededISBN 978 0 580 62446 9£60.00 members, £120.00 non-members
CH/150/2
BS ISO/IEC 11693-2:2009Identification cards. Optical memory cards. Co-existence of optical memory with othermachine readable technology
no current standard is supersededISBN 978 0 580 61520 7£34.00 members, £68.00 non-members
IST/17
BS ISO 12635:2008Graphic technology. Plates for offset printing.Dimensions
supersedes BS ISO 12635:1996ISBN 978 0 580 55702 6£42.00 members, £84.00 non-members
PAI/43
BS ISO 13959:2009Water for haemodialysis and related therapies
no current standard is supersededISBN 978 0 580 62457 5£60.00 members, £120.00 non-members
CH/150/2
BS ISO 14242-3:2009Implants for surgery. Wear of total hip-jointprostheses. Loading and displacementparameters for orbital bearing type weartesting machines and correspondingenvironmental conditions for test
no current standard is supersededISBN 978 0 580 57753 6£42.00 members, £84.00 non-members
CH/150/4
BS ISO 14401-1:2009Earth-moving machinery. Field of vision ofsurveillance and rear-view mirrors. Test methods
supersedes BS ISO 14401-1:2004ISBN 978 0 580 56175 7£42.00 members, £84.00 non-members
B/513/1
BS ISO 14401-2:2009Earth-moving machinery. Field of vision ofsurveillance and rear-view mirrors. Performancecriteria
supersedes BS ISO 14401-2:2004ISBN 978 0 580 56176 4£42.00 members, £84.00 non-members
B/513/1
BS ISO 14813-6:2009Intelligent transport systems. Reference modelarchitecture(s) for the ITS sector. Datapresentation in ASN.1
no current standard is supersededISBN 978 0 580 56118 4£60.00 members, £120.00 non-members
EPL/278
BS Implementations continued...
18 Update Standards Jan 2010Prices may be subject to change.
PD ISO/TR 16268:2009Surface chemical analysis. Proposed procedurefor certifying the retained areic dose in aworking reference material produced by ionimplantation
no current standard is supersededISBN 978 0 580 55764 4£60.00 members, £120.00 non-members
CII/60
PD ISO/TR 24699:2009Rubber and rubber products. Environmentalaspects. General guidelines for their inclusion instandards
no current standard is supersededISBN 978 0 580 58669 9£42.00 members, £84.00 non-members
PRI/90
DRAFTS FOR DEVELOPMENT
DD ISO/TS 11080:2009Dentistry. Essential characteristics of testmethods for the evaluation of treatmentmethods intended to improve or maintain themicrobiological quality of dental unitprocedural water
no current standard is supersededISBN 978 0 580 62945 7£21.00 members, £42.00 non-members
CH/106/4
DD CEN/TS 14940-1:2009Copper and copper alloys. Determination ofchromium content. Titrimetric method
no current standard is supersededISBN 978 0 580 58502 9£16.00 members, £32.00 non-members
NFE/34
DD CEN/TS 15606:2009Foodstuffs. Determination of acesulfame-K,aspartame, neohesperidine-dihydrochalconeand saccharin. High performance liquidchromatographic method
no current standard is supersededISBN 978 0 580 57999 8£34.00 members, £68.00 non-members
AW/-/3
DD ISO/TS 21220:2009Particulate air filters for general ventilation.Determination of filtration performance
no current standard is supersededISBN 978 0 580 67483 9£69.00 members, £138.00 non-members
MCE/21
DD ISO/TS 22224:2009Health informatics. Electronic reporting ofadverse drug reactions
no current standard is supersededISBN 978 0 580 60636 6£21.00 members, £42.00 non-members
IST/35
BS ISO 28178:2009Graphic technology. Exchange format for colourand process control data using XML or ASCIItext
no current standard is supersededISBN 978 0 580 57836 6£79.00 members, £158.00 non-members
PAI/43
BS ISOs IMPLEMENTED BYAMENDMENT
For the standards listed below see alsothe ’Amendment to British Standards’ and’Updated British Standards’ sections ofthis issue of Update Standards.
BS ISO 8178-6:2000Reciprocating internal combustion engines.Exhaust emission measurement. Report ofmeasuring results and testImplementation of International Standard ISO 8178-6 by amendment to BS EN ISO 8178-6:2001
PUBLISHED DOCUMENTS
PD 6682-1:2009Aggregates. Aggregates for concrete. Guidanceon the use of BS EN 12620
supersedes PD 6682-1:2003ISBN 978 0 580 65306 3£69.00 members, £138.00 non-members
B/502
PD 6682-6:2009Aggregates. Aggregates for unbound andhydraulically bound materials for use in civilengineering works and road construction.Guidance on the use of BS EN 13242
supersedes PD 6682-6:2003ISBN 978 0 580 65330 8£69.00 members, £138.00 non-members
B/502
PD 6688-1-4:2009Background information to the National Annexto BS EN 1991-1-4 and additional guidance
no current standard is supersededISBN 978 0 580 58273 8£84.00 members, £168.00 non-members
B/525/1
PD ISO/TR 10809-1:2009Cast irons. Materials and properties for design
no current standard is supersededISBN 978 0 580 62879 5£84.00 members, £168.00 non-members
ISE/35
PD CEN/TR 15894:2009Building hardware. Door fittings for use bychildren, elderly and disabled people indomestic and public buildings. A guide forspecifiers
no current standard is supersededISBN 978 0 580 63814 5£84.00 members, £168.00 non-members
B/538/4
BS ISO 24631-3:2009Radiofrequency identification of animals.Evaluation of performance of RFIDtransponders conforming with ISO 11784 andISO 11785
no current standard is supersededISBN 978 0 580 57201 2£69.00 members, £138.00 non-members
AGE/6/1
BS ISO 24631-4:2009Radiofrequency identification of animals.Evaluation of performance of RFID transceiversconforming with ISO 11784 and ISO 11785
no current standard is supersededISBN 978 0 580 57202 9£60.00 members, £120.00 non-members
AGE/6/1
BS ISO/IEC 24713-3:2009Information technology. Biometric profiles forinteroperability and data interchange.Biometrics-based verification and identificationof seafarers
no current standard is supersededISBN 978 0 580 56519 9£79.00 members, £158.00 non-members
IST/44
BS ISO 25518:2009Single-use rubber gloves for generalapplications. Specification
no current standard is supersededISBN 978 0 580 57105 3£42.00 members, £84.00 non-members
CH/205/3
BS ISO 26722:2009Water treatment equipment for haemodialysisapplications and related therapies
no current standard is supersededISBN 978 0 580 62459 9£69.00 members, £138.00 non-members
CH/150/2
BS ISO 26842-1:2009Adhesives. Test methods for the evaluation andselection of adhesives for indoor woodproducts. Resistance to delamination in non-severe environments
no current standard is supersededISBN 978 0 580 66901 9£42.00 members, £84.00 non-members
PRI/52
BS ISO 26842-2:2009Adhesives. Test methods for the evaluation andselection of adhesives for indoor woodproducts. Resistance to delamination in severeenvironments
no current standard is supersededISBN 978 0 580 66902 6£42.00 members, £84.00 non-members
PRI/52
Update Standards Jan 2010 Prices may be subject to change. 19
BS 2HR 203:2009Specification for nickel-chromium-titaniumheat-resisting alloy plate, sheet and strip (nickelbase, Cr 19.5, Ti 0.4)
supersedes BS HR 203:1972ISBN 978 0 580 67307 8£34.00 members, £68.00 non-members
ACE/61
BS 2HR 204:2009Specification for nickel-chromium-iron-molybdenum-cobalt-tungsten heat-resistingalloy plate, sheet and strip (nickel base, Cr 21.7,Fe 18.5, Mo9, Co 1.5, W 0.6)
supersedes BS HR 204:1972ISBN 978 0 580 67308 5£34.00 members, £68.00 non-members
ACE/61
BS 2HR 205:2009Specification for nickel-copper alloy sheet andstrip: annealed (nickel base, Cu 31)
supersedes BS HR 205:1989ISBN 978 0 580 67309 2£34.00 members, £68.00 non-members
ACE/61
BS 2HR 206:2009Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resistingalloy plate, sheet and strip (nickel base, Co 20,Cr 20, Mo 5.9, Ti 2.1, Al 0.5)
supersedes BS HR 206:1973ISBN 978 0 580 67310 8£34.00 members, £68.00 non-members
ACE/61
BS 2HR 207:2009Specification for nickel-iron-chromium-molybdenum-aluminium-titanium heat-resistingalloy plate, sheet and strip (Ni/Co 43.5, Cr 16.5,Mo 3.3, Al 1.2, Ti 1.2, Fe remainder)
supersedes BS HR 207:1973ISBN 978 0 580 67311 5£34.00 members, £68.00 non-members
ACE/61
BS 2HR 208:2009Specification for nickel-chromium-iron alloyplate, sheet and strip: annealed (nickel base, Cr 15.5, Fe 8)
supersedes BS HR 208:1989ISBN 978 0 580 67312 2£34.00 members, £68.00 non-members
ACE/61
BS 3TA 1:2009Specification for sheet and strip of commerciallypure titanium (tensile strength 290-420 MPa)
supersedes BS 2TA 1:1974ISBN 978 0 580 65381 0£34.00 members, £68.00 non-members
ACE/61/-/49
BS 3B 29:2009Specification for copper-beryllium alloy stripand foil (solution treated, cold rolled: quarterhard and precipitation treated)
supersedes BS 2B 29:2001ISBN 978 0 580 62844 3£34.00 members, £68.00 non-members
ACE/61
BS 3B 30:2009Specification for copper-beryllium alloy stripand foil (solution treated, cold rolled: half hardand precipitation treated)
supersedes BS 2B 30:2001ISBN 978 0 580 62845 0£34.00 members, £68.00 non-members
ACE/61
BS 3B 31:2009Specification for copper-beryllium alloy stripand foil (solution treated, cold rolled: full hardand precipitation treated)
supersedes BS 2B 31:2001ISBN 978 0 580 62846 7£34.00 members, £68.00 non-members
ACE/61
BS 3B 32:2009Specification for copper-beryllium alloy rods,bars and sections (solution treated andprecipitation treated)
supersedes BS 2B 32:2001ISBN 978 0 580 62847 4£34.00 members, £68.00 non-members
ACE/61
BS 3B 33:2009Specification for copper-beryllium alloy wire(solution treated and precipitation treated)
supersedes BS 2B 33:2001ISBN 978 0 580 62848 1£34.00 members, £68.00 non-members
ACE/61
BS 3HR 201:2009Specification for nickel-chromium-titanium-aluminium heat-resisting alloy plate, sheet andstrip (nickel base, Cr 19.5, Ti 2.2, Al 1.4)
supersedes BS 2HR 201:1974ISBN 978 0 580 67305 4£34.00 members, £68.00 non-members
ACE/61
BS 3HR 202:2009Specification for nickel-chromium-cobalt-titanium-aluminium heat-resisting alloy sheetand strip (nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
supersedes BS 2HR 202:1973ISBN 978 0 580 67306 1£34.00 members, £68.00 non-members
ACE/61
AEROSPACE SERIES
BS 2B 23:2009Specification for copper-aluminium-nickel-ironalloy rods, bars, sections, forging stock andforgings
supersedes BS B 23:1991ISBN 978 0 580 62838 2£34.00 members, £68.00 non-members
ACE/61
BS 2B 24:2009Specification for copper-tin-phosphorous alloyrods and sections
supersedes BS B 24:1991ISBN 978 0 580 62839 9£34.00 members, £68.00 non-members
ACE/61
BS 3B 25:2009Specification for copper-nickel-silicon alloy rods,bars, sections, forging stock and forgings (heattreated)
supersedes BS 2B 25:2001ISBN 978 0 580 62840 5£34.00 members, £68.00 non-members
ACE/61
BS 3B 26:2009Specification for copper-nickel-silicon alloy rods,bars and sections (solution treated, cold workedand precipitation treated)
supersedes BS 2B 26:2001ISBN 978 0 580 62841 2£34.00 members, £68.00 non-members
ACE/61
BS 3B 27:2009Specification for copper-zinc-aluminium-nickel-silicon alloy tube
supersedes BS 2B 27:2002ISBN 978 0 580 62842 9£34.00 members, £68.00 non-members
ACE/61
BS 3B 28:2009Specification for copper-beryllium alloy stripand foil (solution treated and precipitationtreated)
supersedes BS 2B 28:2001ISBN 978 0 580 62843 6£34.00 members, £68.00 non-members
ACE/61
Aerospace Series
20 Update Standards Jan 2010Prices may be subject to change.
Please
do not send
confirmation
of
orders placed by
telephone
as it can lead to
duplication
BS 2TA 46:2009Specification for bar and section for machiningof titanium-aluminium-molybdenum-tin-siliconalloy (tensile strength 1050-1220 MPa) (limitingruling section over 25 mm up to and including100 mm)
supersedes BS TA 46:1973ISBN 978 0 580 65369 8£34.00 members, £68.00 non-members
ACE/61/-/49
BS 2TA 47:2009Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon alloy (tensilestrength 1050-1220 MPa) (limiting ruling section100 mm)
supersedes BS TA 47:1973ISBN 978 0 580 65370 4£34.00 members, £68.00 non-members
ACE/61/-/49
BS 2TA 48:2009Specification for forgings of titanium-aluminium-molybdenum-tin-silicon-carbon alloy(tensile strength 1050-1200 MPa) (limitingruling section 100 mm)
supersedes BS TA 48:1973ISBN 978 0 580 65371 1£34.00 members, £68.00 non-members
ACE/61
BS 2TA 49:2009Specification for bar and section for machiningof titanium-aluminium-molybdenum-tin-silicon-carbon alloy (tensile strength 1000-1200 MPa)(limiting ruling section over 100 mm up to andincluding 150 mm)
supersedes BS TA 49:1973ISBN 978 0 580 65372 8£34.00 members, £68.00 non-members
ACE/61
BS 2TA 50:2009Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon alloy (tensilestrength 1000-1200 MPa) (limiting ruling sectionover 100 mm up to and including 150 mm)
supersedes BS TA 50:1973ISBN 978 0 580 65459 6£34.00 members, £68.00 non-members
ACE/61
BS 2TA 51:2009Specification for forgings of titanium-aluminium-molybdenum-tin-silicon alloy (tensilestrength 1000-1200 MPa) (limiting ruling sectionover 100 mm up to and including 150 mm)
supersedes BS TA 51:1973ISBN 978 0 580 65460 2£34.00 members, £68.00 non-members
ACE/61
BS 2TA 52:2009Specification for sheet and strip of titanium-copper alloy (tensile strength 690-920 MPa)
supersedes BS TA 52:1973ISBN 978 0 580 65461 9£34.00 members, £68.00 non-members
ACE/61
BS 3TA 28:2009Specification for forging stock and wire oftitanium-aluminium-vanadium alloy (tensilestrength 1100-1300 MPa) (limiting ruling section20 mm)
supersedes BS 2TA 28:1974ISBN 978 0 580 65390 2£34.00 members, £68.00 non-members
ACE/61/-/49
BS 2TA 38:2009Specification for bar for machining of titanium-aluminium-molybdenum-tin-silicon-carbon alloy(tensile strength 1250-1420 MPa) (limitingruling section 25 mm)
supersedes BS TA 38:1971ISBN 978 0 580 65363 6£34.00 members, £68.00 non-members
ACE/61/-/49
BS 2TA 39:2009Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon-carbon alloy(tensile strength 1250-1420 MPa) (limitingruling section 25 mm)
supersedes BS TA 39:1971ISBN 978 0 580 65364 3£34.00 members, £68.00 non-members
ACE/61/-/49
BS 2TA 40:2009Specification for bar for machining of titanium-aluminium-molybdenum-tin-silicon-carbon alloy(tensile strength 1205-1375 MPa) (limitingruling section over 25 mm up to and including75 mm)
supersedes BS TA 40:1971ISBN 978 0 580 65365 0£34.00 members, £68.00 non-members
ACE/61/-/49
BS 2TA 41:2009Specification for forging stock of titanium-aluminium-molybdenum-tin-silicon-carbon alloy(tensile strength 1205-1375 MPa) (limitingruling section over 25 mm up to and including75 mm)
supersedes BS TA 41:1971ISBN 978 0 580 65366 7£34.00 members, £68.00 non-members
ACE/61/-/49
BS 2TA 42:2009Specification for forgings of titanium-aluminium-molybdenum-tin-silicon-carbon alloy(tensile strength 1205-1375 MPa) (limitingruling section over 25 mm up to and including75 mm)
supersedes BS TA 42:1971ISBN 978 0 580 65367 4£34.00 members, £68.00 non-members
ACE/61/-/49
BS 2TA 45:2009Specification for bar and section for machiningof titanium-aluminium-molybdenum-tin-siliconalloy (tensile strength 1100-1280 MPa) (limitingruling section 25 mm)
supersedes BS TA 45:1973ISBN 978 0 580 65368 1£34.00 members, £68.00 non-members
ACE/61/-/49
BS 3TA 2:2009Specification for sheet and strip of commerciallypure titanium (tensile strength 390-540 MPa)
supersedes BS 2TA 2:1973ISBN 978 0 580 65382 7£34.00 members, £68.00 non-members
ACE/61/-/49
BS 3TA 6:2009Specification for sheet and strip of commerciallypure titanium (tensile strength 570-730 MPa)
supersedes BS 2TA 6:1973ISBN 978 0 580 65383 4£34.00 members, £68.00 non-members
ACE/61/-/49
BS 3TA 7:2009Specification for bar and section for machiningof commercially pure titanium (tensile strength540-740 MPa)
supersedes BS 2TA 7:1973ISBN 978 0 580 65384 1£34.00 members, £68.00 non-members
ACE/61/-/49
BS 3TA 10:2009Specification for sheet of titanium-aluminium-vanadium alloy (tensile strength 960-1270 MPa)
supersedes BS 2TA 10:1974ISBN 978 0 580 65385 8£34.00 members, £68.00 non-members
ACE/61/-/49
BS 3TA 11:2009Specification for bar and section for machiningof titanium-aluminium-vanadium alloy (tensilestrength 900-1160 MPa) (limiting ruling section150 mm)
supersedes BS 2TA 11:1974ISBN 978 0 580 65386 5£34.00 members, £68.00 non-members
ACE/61/-/49
BS 3TA 12:2009Specification for forging stock of titanium-aluminium-vanadium alloy (tensile strength900-1160 MPa) (limiting ruling section 150 mm)
supersedes BS 2TA 12:1974ISBN 978 0 580 65387 2£34.00 members, £68.00 non-members
ACE/61/-/49
BS 3TA 13:2009Specification for forgings of titanium-aluminium-vanadium alloy (tensile strength900-1160 MPa) (limiting ruling section 150 mm)
supersedes BS 2TA 13:1974ISBN 978 0 580 65388 9£34.00 members, £68.00 non-members
ACE/61/-/49
BS 3TA 21:2009Specification for sheet and strip of titanium-copper alloy (tensile strength 540-700 MPa)
supersedes BS 2TA 21:1973ISBN 978 0 580 65389 6£34.00 members, £68.00 non-members
ACE/61/-/49
Update Standards Jan 2010 Prices may be subject to change. 21
BS EN 60384-3:2006Fixed capacitors for use in electronicequipment. Sectional specification: Surfacemount fixed tantalum electrolytic capacitorswith manganese dioxide solid electrolyte
CORRIGENDUM 1
EPL/40X
BS EN 60393-1:2009Potentiometers for use in electronic equipment.Generic specification
CORRIGENDUM 1
EPL/40X
BS EN 60896-22:2004Stationary lead-acid batteries. Valve regulatedtypes. Requirements
CORRIGENDUM 1
PEL/21
BS EN 60950-1:2001Information technology equipment. Safety.General requirements
CORRIGENDUM 2
EPL/108
Also incorporates Corrigenda 1 and Amendment 11
BS ISO 8178-6:2000Reciprocating internal combustion engines.Exhaust emission measurement. Report ofmeasuring results and test
CORRIGENDUM 2
MCE/14/-/3
UPDATED BRITISHSTANDARDS
The following standards have beenamended and the amendments havebeen incorporated into an updatedstandard.
NOTE: Updated British Standardsmust be reordered as theamendments are not availableseparately.
BS EN 609-1:1999+A2:2009Agricultural and forestry machinery. Safety oflog splitters. Wedge splitters
AMENDMENT 2£42.00 members, £84.00 non-members
AGE/29
Also incorporates Amendment 1
BS EN 609-2:1999+A1:2009Agricultural and forestry machinery. Safety oflog splitters. Screw splitters
AMENDMENT 1£42.00 members, £84.00 non-members
AGE/29
BS EN 794-3:1998+A2:2009Lung ventilators. Particular requirements foremergency and transport ventilators
AMENDMENT 2£79.00 members, £158.00 non-members
CH/121/5
Also incorporates Amendment 1
CORRIGENDA TO BRITISHSTANDARDS
Most amendments are not issuedseparately. Those that make significantchanges to a standard are incorporatedinto the standard which is reissued (see‘Updated British Standards’). BritishStandards which have been corrected viacorrigenda are available on request, freeof charge to past purchasers of thestandard. All amendments and corrigendato date of despatch are included withinany main publication when ordered forthe first time.
The following corrigenda to BritishStandards were made available lastmonth.
BS 460:2002+A2:2007Cast iron rainwater goods. Specification
CORRIGENDUM 2
PSE/10
Also incorporates Corrigenda 1 and Amendments 1& 2
BS 870:2008Specification for external micrometers
CORRIGENDUM 2
TDW/4
Also incorporates Corrigenda 1
BS 5422:2009Method for specifying thermal insulatingmaterials for pipes, tanks, vessels, ductwork andequipment operating within the temperaturerange -40ºC to +700ºC
CORRIGENDUM 1
B/540/7
BS EN 2955:1993Aerospace series. Recycling of titanium andtitanium alloy scrap
CORRIGENDUM 1
ACE/61/-/49
BS EN 10269:1999+A1:2006Steels and nickel alloys for fasteners withspecified elevated and/or low temperatureproperties
CORRIGENDUM 4
ISE/73/2
Also incorporates Corrigenda 1, 2 & 3 andAmendment 1
BS EN ISO/IEC 19796-1:2009Information technology. Learning, educationand training. Quality management, assuranceand metrics. General approach
CORRIGENDUM 1
IST/43
BS 2TA 56:2009Specification for plate of titanium-aluminium-vanadium alloy (tensile strength 895-1150 MPa)(maximum thickness 100 mm)
supersedes BS TA 56:1974ISBN 978 0 580 65462 6£34.00 members, £68.00 non-members
ACE/61
BS 2TA 57:2009Specification for plate of titanium-aluminium-molybdenum-tin-silicon alloy (tensile strength1030-1220 MPa) (thickness over 50 mm up toand including 65 mm)
supersedes BS TA 57:1974 which remains currentISBN 978 0 580 65463 3£34.00 members, £68.00 non-members
ACE/61
BS 2TA 58:2009Specification for plate of titanium-copper alloy(tensile strength 520-640 MPa) (maximumthickness 10 mm)
supersedes BS TA 58:1974ISBN 978 0 580 65464 0£34.00 members, £68.00 non-members
ACE/61
BS 2TA 59:2009Specification for sheet of titanium-aluminium-vanadium alloy (tensile strength 920-1180 MPa)
supersedes BS TA 59:1980ISBN 978 0 580 65465 7£34.00 members, £68.00 non-members
ACE/61
BS 3TA 100:2009Procedure for inspection, testing andacceptance of wrought titanium and titaniumalloys
supersedes BS 2TA 100:1973ISBN 978 0 580 65391 9£79.00 members, £158.00 non-members
ACE/61/-/49
PUBLICLY AVAILABLESPECIFICATIONS
Publicly Available Specifications (formerlyProduct Assessment Specifications) areissued to provide an interim documentwhere there is a market need but wherea full British or European Standard hasyet to be published.
PAS 66:2009Official identification eartags for sheep andgoats. Specification
supersedes PAS 66:2005ISBN 978 0 580 67304 7£50.00 members, £50.00 non-members
Aerospace Series continued...
22 Update Standards Jan 2010Prices may be subject to change.
BS EN 13501-2:2007+A1:2009Fire classification of construction products andbuilding elements. Classification using datafrom fire resistance tests, excluding ventilationservices
AMENDMENT 1£90.00 members, £180.00 non-members
FSH/22
BS EN 13501-3:2005+A1:2009Fire classification of construction products andbuilding elements. Classification using datafrom fire resistance tests on products andelements used in building service installations:fire resisting ducts and fire dampers
AMENDMENT 1£60.00 members, £120.00 non-members
FSH/22
BS EN 13501-4:2007+A1:2009Fire classification of construction products andbuilding elements. Classification using datafrom fire resistance tests on components ofsmoke control systems
AMENDMENT 1£69.00 members, £138.00 non-members
FSH/22
BS EN 13501-5:2005+A1:2009Fire classification of construction products andbuilding elements. Classification using datafrom external fire exposure to roofs tests
AMENDMENT 1£69.00 members, £138.00 non-members
FSH/22
Also incorporates Corrigenda 1
BS EN 14180:2003+A2:2009Sterilizers for medical purposes. Lowtemperature steam and formaldehydesterilizers. Requirements and testing
AMENDMENT 2£84.00 members, £168.00 non-members
LBI/35
Also incorporates Amendment 1
BS EN 15376:2007+A1:2009Automotive fuels. Ethanol as a blendingcomponent for petrol. Requirements and testmethods
AMENDMENT 1£34.00 members, £68.00 non-members
PTI/2
BS EN 60059:1999+A1:2009IEC standard current ratings
AMENDMENT 1£34.00 members, £68.00 non-members
GEL/8
BS EN 60598-1:2008Luminaires. General requirements and tests
AMENDMENT 11£114.00 members, £228.00 non-members
CPL/34/4
BS EN ISO 9902-1:2001+A1:2009Textile machinery. Noise test code. Commonrequirements
AMENDMENT 1£60.00 members, £120.00 non-members
TCI/33
BS EN ISO 9902-2:2001+A1:2009Textile machinery. Noise test code. Spinningpreparatory and spinning machinery
AMENDMENT 1£60.00 members, £120.00 non-members
TCI/33
BS EN ISO 9902-3:2001+A1:2009Textile machinery. Noise test code. Nonwovenmachinery
AMENDMENT 1£42.00 members, £84.00 non-members
TCI/33
BS EN ISO 9902-5:2001+A1:2009Textile machinery. Noise test code. Weaving andknitting preparatory machinery
AMENDMENT 1£42.00 members, £84.00 non-members
TCI/33
BS EN ISO 9902-6:2001+A1:2009Textile machinery. Noise test code. Fabricmanufacturing machinery
AMENDMENT 1£60.00 members, £120.00 non-members
TCI/33
BS EN ISO 11111-2:2005+A1:2009Textile machinery. Safety requirements.Spinning preparatory and spinning machines
AMENDMENT 1£69.00 members, £138.00 non-members
TCI/33
BS EN 12779:2004+A1:2009Safety of woodworking machines. Chip anddust extraction systems with fixed installation.Safety related performances and safetyrequirements
AMENDMENT 1£84.00 members, £168.00 non-members
MTE/23
BS EN 13060:2004+A1:2009Small steam sterilizers
AMENDMENT 1£90.00 members, £180.00 non-members
LBI/35
Also incorporates Corrigenda 1
BS EN 13501-1:2007+A1:2009Fire classification of construction products andbuilding elements. Classification using test datafrom reaction to fire tests
AMENDMENT 1£84.00 members, £168.00 non-members
FSH/21
BS EN 1218-5:2004+A1:2009Safety of woodworking machines. Tenoningmachines. One side profiling machines withfixed table and feed rollers or fed by chain
AMENDMENT 1£84.00 members, £168.00 non-members
MTE/23
Also incorporates Corrigenda 1
BS EN 1422:1997+A1:2009Sterilizers for medical purposes. Ethylene oxidesterilizers. Requirements and test methods
AMENDMENT 1£84.00 members, £168.00 non-members
LBI/35
Also incorporates Corrigenda 1
BS EN 1807:1999+A1:2009Safety of woodworking machines. Band sawingmachines
AMENDMENT 1£90.00 members, £180.00 non-members
MTE/23
BS EN 1870-8:2001+A1:2009Safety of woodworking machines. Circularsawing machines. Single blade edging circularrip sawing machines with power driven sawunit and manual loading and/or unloading
AMENDMENT 1£84.00 members, £168.00 non-members
MTE/23
BS EN 1870-9:2000+A1:2009Safety of woodworking machines. Circularsawing machines. Double blade circular sawingmachines for cross-cutting with integrated feedand with manual loading and/or unloading
AMENDMENT 1£69.00 members, £138.00 non-members
MTE/23
BS EN 1870-10:2003+A1:2009Safety of woodworking machines. Circularsawing machines. Single blade automatic andsemi-automatic up-cutting cross-cut sawingmachines
AMENDMENT 1£79.00 members, £158.00 non-members
MTE/23
BS EN 1870-11:2003+A1:2009Safety of woodworking machines. Circularsawing machines. Semi-automatic andautomatic horizontal cross-cut sawing machineswith one saw unit (radial arm saws)
AMENDMENT 1£79.00 members, £158.00 non-members
MTE/23
Also incorporates Corrigenda 1
BS EN 1889-2:2003+A1:2009Machines for underground mines. Mobilemachines working Underground. Safety. Raillocomotives
AMENDMENT 1£84.00 members, £168.00 non-members
MRE/1
Update Standards Jan 2010 Prices may be subject to change. 23
BS 131-7:1998Notched bar tests. Specification for verificationof the test machine used for precisiondetermination of Charpy V-notch impactenergies for metals
ISE/NFE/4/4
BS 350:2004Conversion factors for units
SS/7
BS 493:1995Specification for airbricks and gratings for wallventilation
B/519/1
BS 567:1973Specification for asbestos-cement flue pipes andfittings, light quality
B/506
BS 598-112:2004Sampling and examination of bituminousmixtures for roads and other paved areas.Method for the use of road surface hardnessprobe
B/510/2
BS 822-6:2004Terminal markings for electrical machinery andapparatus. Lead colours for rotating electricalmachinery
PEL/2
BS 835:1973Specification for asbestos-cement flue pipes andfittings, heavy quality
B/506
BS 842:1965Specification for A.C. voltage-operated earth-leakage circuit breakers
PEL/23
BS 1054:1975Specification for engineers’ comparators forexternal measurement
TDW/4
BS 1127-2:1990Screwing dies and dienuts. Specification forhand- and machine-operated circular screwingdies for taper pipe threads. R series
MTE/18
BS 1347:1986Specification for architects’, engineers’ andsurveyors’ metric scale rules
TDW/4
BS 1377-1:1990Methods of test for soils for civil engineeringpurposes. General requirements and samplepreparation
B/526/3
BRITISH STANDARDSPROPOSED FORCONFIRMATION
It is BSI policy for every standard to bereviewed by the technical committeeresponsible not more than five years afterpublication, to establish whether it is stillcurrent and, if it is not, to identify and setin hand appropriate action.
Circumstances may lead to an earlierreview.
Confirmation indicates the continuingcurrency of a standard.
A note of any objections to the proposalsbelow should be sent to Debbie Stead,Head of Committee Service Centre –Operations, BSI Head Office, 389 ChiswickHigh Road, London W4 4AL or via emailto [email protected] 28 February, 2010.
BS 4999-103:2004General requirements for rotating electricalmachines. Specification for symbols
PEL/2
BRITISH STANDARDSREVIEWED ANDCONFIRMED
It is BSI policy for every standard to bereviewed by the technical committeeresponsible not more than five years afterpublication, to establish whether it is stillcurrent and, if it is not, to identify and setin hand appropriate action.
Confirmation indicates the continuingcurrency of a standard.
Where any standard in this list has beenamended since publication, confirmationincludes all amendments published todate. Reference to a particularamendment indicates that it is publishedconcurrently with the confirmation.
BS 41:1973Specification for cast iron spigot and socket flueor smoke pipes and fittings
B/506
BS 65:1991Specification for vitrified clay pipes, fittings andducts, also flexible mechanical joints for usesolely with surface water pipes and fittings
B/505
BS 131-6:1998Notched bar tests. Method for precisiondetermination of Charpy V-notch impactenergies for metals
ISE/NFE/4/4
SPECIAL ANNOUNCEMENTS
Comments can be sent by email or bypost to named contacts at:–BSI Head Office389 Chiswick High RoadLondon W4 4ALTel: 020 8996 9000
New International Work on DistributedApplications Platforms and Services (DAPS)
ISO/IEC JTC 1 members recently voted toestablish a new subcommittee, JTC 1/SC 38 toaddress standardization for interoperableDistributed Application Platforms and services.Within SC 38 there will be specific groupsaddressing:
Web Services, Service Oriented Architecture(SOAs) and Cloud Computing.
BSI are considering setting up a UK-centredgroup of experts to mirror the work of ISO/IECJTC 1/SC 38, and would like to hear fromrelevant trade associations, and any other keystakeholder bodies, who would like tonominate members to participate in this work. For further information and to registeryour interest in this activity, please contact the Programme Manager (below) by 31 January, 2010.Contact: Jean StrideEmail: [email protected]
ICT/-/1
BS 5950-1:2001Structural use of steelwork in building. Code ofpractice for design. Rolled and welded sections
BS 5950-4:1994Structural use of steelwork in building. Code ofpractice for design of composite slabs withprofiled steel sheeting
BS 5950-6:1995Structural use of steelwork in building. Code ofpractice for design of light gauge profiled steelsheeting
BS 5950-8:2003Structural use of steelwork in building. Code ofpractice for fire resistant design
BS 5950-9:1994Structural use of steelwork in building. Code ofpractice for stressed skin design
These documents have been reviewed andconfirmed without change by theUK committee B/525/31. These documents aresuperseded by the Eurocodes EN 1993 and aredue to be withdrawn in March 2010 when theEurocodes will be fully implemented.Contact: Clare PriceEmail: [email protected]
B/525/31
Special Announcements
24 Update Standards Jan 2010Prices may be subject to change.
BS 2000-50:1993Methods of test for petroleum and its products.Determination of cone penetration oflubricating grease
PTI/13
BS 2000-61:1999Methods of test for petroleum and its products.Determination of sulfur. High pressurecombustion method
PTI/13
BS 2000-76:1993Methods of test for petroleum and its products.Determination of congealing point of waxesand petrolatum
PTI/13
BS 2000-107:1993Methods of test for petroleum and its products.Determination of sulfur. Lamp combustionmethod
PTI/13
BS 2000-133:1993Methods of test for petroleum and its products.Determination of drop melting point of waxand petrolatum
PTI/13
BS 2000-137:1993Methods of test for petroleum and its products.Determination of oil content of water mixmetalworking oil dilutions
PTI/13
BS 2000-142:1993Methods of test for petroleum and its products.Determination of oxidation stability oflubricating grease. Oxygen bomb method
PTI/13
BS 2000-179:1993Methods of test for petroleum and its products.Determination of cone penetration ofpetrolatum
PTI/13
BS 2000-195:1998Methods of test for petroleum and its products.Determination of distillation characteristics ofvolatile organic liquids
PTI/13
BS 2000-213:1993Methods of test for petroleum and its products.Determination of neutralization value ofbitumen. Colour indicator titration method
PTI/13
BS 2000-223:1993Methods of test for petroleum and its products.Determination of ash of petroleum productscontaining mineral matter
PTI/13
BS 1449-1.14:1991Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specificationfor hot rolled narrow strip supplied in a rangeof conditions for heat treatment and generalengineering purposes
ISE/10
BS 1660-5:1996Machine tapers. Specification for reductionsleeves with external and internal 7/24 tapers
MTE/18
BS 1660-12:1996Machine tapers. Specification for positive driveof Morse tapers
MTE/18
BS 2000-0.1:1999Methods of test for petroleum and its products.General introduction. Specifications. IP standardthermometers
PTI/13
BS 2000-0.2:1996Methods of test for petroleum and its products.General introduction. Specifications for IPstandard reference liquids
PTI/13
BS 2000-0.4:1996Methods of test for petroleum and its products.General introduction. Barometric pressurecorrections
PTI/13
BS 2000-1:1995Methods of test for petroleum and its products.Determination of acidity, neutralization value.Colour indicator titration method
PTI/13
BS 2000-10:1995Methods of test for petroleum and its products.Determination of kerosine burningcharacteristics. 24 hour method
PTI/13
BS 2000-12:1993Methods of test for petroleum and its products.Determination of specific energy
PTI/13
BS 2000-35:1993Methods of test for petroleum and its products.Determination of open flash and fire point.Pensky-Martens method
PTI/13
BS 2000-48:1997Methods of test for petroleum and its products.Determination of oxidation characteristics oflubricating oil
PTI/13
BS 1377-2:1990Methods of test for soils for civil engineeringpurposes. Classification tests
B/526/3
BS 1377-3:1990Methods of test for soils for civil engineeringpurposes. Chemical and electro-chemical tests
B/526/3
BS 1377-4:1990Methods of test for soils for civil engineeringpurposes. Compaction-related tests
B/526/3
BS 1377-5:1990Methods of test for soils for civil engineeringpurposes. Compressibility, permeability anddurability tests
B/526/3
BS 1377-6:1990Methods of test for soils for civil engineeringpurposes. Consolidation and permeability testsin hydraulic cells and with pore pressuremeasurement
B/526/3
BS 1377-7:1990Methods of test for soils for civil engineeringpurposes. Shear strength tests (total stress)
B/526/3
BS 1377-8:1990Methods of test for soils for civil engineeringpurposes. Shear strength tests (effective stress)
B/526/3
BS 1407:1970Specification for high carbon bright steel (silversteel)
ISE/31
BS 1428-D4:1963(BS 797:1963)Microchemical apparatus. Volumetric analysis.Specification for capillary pipettes
LBI/36
BS 1449-1.1:1991Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Generalspecification
ISE/10
BS 1449-1.8:1991Steel plate, sheet and strip. Carbon and carbon-manganese plate, sheet and strip. Specificationfor hot rolled narrow strip based on formability
ISE/10
Update Standards Jan 2010 Prices may be subject to change. 25
BS 4787-1:1980Internal and external wood doorsets, doorleaves and frames. Specification for dimensionalrequirements
B/538/2
BS 4811:1972Specification for the presentation of researchand development reports
IDT/2
BS 4812:1972Specification for the romanization of Japanese
IDT/2
BS 4875-8:1998Furniture. Strength and stability of furniture.Methods for determination of stability of non-domestic storage furniture
FW/0
BS 4894:1993Specification for bifurcated rivets for generalpurpose use (metric series)
FME/9/3
BS 5046:1974Method for the estimation of equivalentdiameters in the heat treatment of steel
ISE/31
BS 5248:1990Specification for aspirated hygrometer
LBI/36
BS 5252:1976Framework for colour co-ordination forbuilding purposes
STI/14
BS 5266-2:1998Emergency lighting. Code of practice forelectrical low mounted way guidance systemsfor emergency use
CPL/34/9
BS 5266-4:1999Emergency lighting. Code of practice for design,installation, maintenance and use of opticalfibre systems
CPL/34/9
BS 5266-5:1999Emergency lighting. Specification forcomponent parts of optical fibre systems
CPL/34/9
BS 5266-6:1999Emergency lighting. Code of practice for non-electrical low mounted way guidance systemsfor emergency use. Photoluminescent systems
CPL/34/9
BS 5276-2:2003Pressure vessel details (dimensions).Specification for saddle supports for horizontalcylindrical pressure vessels
PVE/1
BS 2543:2004Upholstery fabrics for end use applications.Classification
TCI/66
BS 2738-3:2004+A1:2008Spectacle lenses. Specification for thepresentation of prescriptions and prescriptionorders for ophthalmic lenses
CH/172/3
BS 2772-2:1989Colliery haulage and winding equipment.Specification for wrought steel
ISE/31
BS 2782-0:2004Methods of testing. Plastics. Introduction
PRI/21
BS 2782-7:Method 720B:1979Methods of testing plastics. Rheologicalproperties. Cup flow of phenolic and alkydmoulding materials
PRI/21
BS 2975-1:2004Sampling and analysis of glass-making sands.Methods for sampling and physical testing ofglass-making sands
LBI/36/5
BS 2979:1958Transliteration of Cyrillic and Greek characters
IDT/2
BS 3459:1985Specification for stands for drawing boards
TDW/4
BS 3509:1962Specification for spirit level vials
TDW/4
BS 4177:1992Specification for cooker control units
PEL/23
BS 4280:1968Transliteration of Arabic characters
IDT/2
BS 4315-2:1970Methods of test for resistance to air and waterpenetration. Permeable walling constructions(water penetration)
B/519/1
BS 4358:1968Glossary of terms used in air gauging withnotes on the technique
TDW/4
BS 4484-1:1969Specification for measuring instruments forconstructional works. Metric graduation andfiguring of instruments for linear measurement
TDW/4
BS 2000-272:2000Methods of test for petroleum and its products.Determination of mercaptan sulfur andhydrogen sulfide content of liquefiedpetroleum gases (LPG). Electrometric titrationmethod
PTI/13
BS 2000-306:1994Methods of test for petroleum and its products.Determination of oxidation stability of straightmineral oil
PTI/13
BS 2000-313:2001Methods of test for petroleum and its products.Determination of air release of lubricating andhydraulic oils
PTI/13
BS 2000-317:1995Methods of test for petroleum and its products.Determination of residues in liquefiedpetroleum gases. Low temperature evaporationmethod
PTI/13
BS 2000-346:1996Methods of test for petroleum and its products.Determination of polycyclic aromatics in unusedlubricating base oils and asphaltene freepetroleum fractions. Dimethyl sulphoxideextraction refractive index method
PTI/13
BS 2000-450:2000Methods of test for petroleum and its products.Diesel fuel. Assessment of lubricity using thehigh-frequency reciprocating rig (HFRR). Testmethod
PTI/13
BS 2000-454:2000Methods of test for petroleum and its products.Determination of phosphorus in gasoline.Spectrophotometric method
PTI/13
BS 2000-455:2001Methods of test for petroleum and its products.Determination of manganese in gasoline.Atomic absorption spectrometry (AAS) method
PTI/13
BS 2000-456:2000Methods of test for petroleum and its products.Determination of potassium in gasoline. Atomicabsorption spectrometry (AAS) method
PTI/13
BS 2457:1975Specification for protractors for drawing officeuse
TDW/4
BS 2459:1974Specification for set squares (fixed andadjustable) for drawing office use
TDW/4
British Standards Reviewed and Confirmed continued...
26 Update Standards Jan 2010Prices may be subject to change.
BS 5977-1:1981Lintels. Method for assessment of load
B/519/3
BS 6037-2:2004Code of practice for the planning, design,installation and use of permanently installedaccess equipment. Travelling ladders andgantries
B/514/39
BS 6133:1995Code of practice for safe operation of lead-acidstationary batteries
PEL/21
BS 6165:2002Specification for small disposable fireextinguishers of the aerosol type
FSH/2
BS 6172:2004Installation and maintenance of domestic gascooking appliances (2nd and 3rd family gases).Specification
GSE/30
BS 6259:1997Code of practice for the design, planning,installation, testing and maintenance of soundsystems
EPL/100/3
BS 6371:1983Recommendations for citation of unpublisheddocuments
IDT/2/2
BS 6381:1983Specification for drawing boards
TDW/4
BS 6404-20:1996Magnetic materials. Resistance and temperatureclassification of insulation coatings
ISE/NFE/5
BS 6643-1:1985Recharging fire extinguishers (manufactured toBS 5423 ’Specification for portable fireextinguishers’). Specification for procedure andmaterials
FSH/2
BS 6643-2:1985Recharging fire extinguishers (manufactured toBS 5423 ’Specification for portable fireextinguishers’). Specification for powder refillcharges
FSH/2
BS 5656-2:2004Escalator and moving walks. Safety rules for theconstruction and installation of escalators andmoving walks. Code of practice for theselection, installation and location of newescalators and moving walks
MHE/4
BS 5682:1998Specification for probes (quick connectors) foruse with medical gas pipeline systems
CH/121/1
BS 5854:1980Code of practice for flues and flue structures inbuildings
B/506
BS 5864:2004Installation and maintenance of gas-firedducted air heaters of rated input not exceeding70 kW net (2nd and 3rd family gases).Specification
GSE/30
BS 5867-1:2004Textiles and textile products. Curtains anddrapes. General requirements
TCI/66
BS 5884:1999Magnetic materials. Methods for thedetermination of the relative magneticpermeability of feebly magnetic materials
ISE/NFE/5
BS 5950-1:2000Structural use of steelwork in building. Code ofpractice for design. Rolled and welded sections
B/525/31
BS 5950-4:1994Structural use of steelwork in building. Code ofpractice for design of composite slabs withprofiled steel sheeting
B/525/4
BS 5950-6:1995Structural use of steelwork in building. Code ofpractice for design of light gauge profiled steelsheeting
B/525/31
BS 5950-8:2003Structural use of steelwork in building. Code ofpractice for fire resistant design
B/525/31
BS 5950-9:1994Structural use of steelwork in building. Code ofpractice for stressed skin design
B/525/31
BS 5285:1975Specification. Performance of A.C. electricventilating fans and regulators for non-industrial use
CPL/59
BS 5346:1976Specification. ISO metric trapezoidal screwthreads
FME/9/3
BS 5459-2:2000+A2:2008Specification for performance requirements andtests for office furniture. Office pedestal seatingfor use by persons weighing up to 150kg andfor use up to 24 hours a day, including type-approval tests for individual components
FW/0/3
BS 5507-1:1977Methods of test for falsework equipment. Floorcentres
B/514
BS 5507-3:1982Methods of test for falsework equipment. Props
B/514
BS 5605:1990Recommendations for citing and referencingpublished material
IDT/2/2
BS 5642-1:1978Sills and copings. Specification for window sillsof precast concrete, cast stone, clayware, slateand natural stone
B/519/3
BS 5642-2:1983Sills and copings. Specification for copings ofprecast concrete, cast stone, clayware, slate andnatural stone
B/519/3
Update Standards Jan 2010 Prices may be subject to change. 27
Help Us to Help
You!
Always quote your Customer Number
Don’t know your number?
Contact Customer Services
020 8996 9001
who will be happy to check it for you
BS 7805-2:1997Swaged collar grooved rivets. Specification forsizes from 12.7 mm up to and including 34.9mm
FME/9/3
BS 7855-1:1996Metric rivets for the attachment of frictionlinings. Specification for semi-tubular rivets
FME/9/3
BS 7856:1996Code of practice for design of alternatingcurrent, watthour meters for active energy(classes 1 and 2)
PEL/13
BS 7899-1:1997Code of practice for assessment of hazard tolife and health from fire. General guidance
FSH/16
BS 7899-2:1999Code of practice for assessment of hazard tolife and health from fire. Guidance on methodsfor the quantification of hazards to life andhealth and estimation of time to incapacitationand death in fires
FSH/16
BS 7935-1:2004Constant amplitude dynamic force calibration.Calibration and verification of non-resonantuniaxial dynamic testing systems. Method
ISE/NFE/4/6
BS 7935-2:2004Constant amplitude force calibration.Calibration of the calibration deviceinstrumentation to be used for the dynamiccalibration of non-resonant uniaxial dynamictesting systems. Method
ISE/NFE/4/6
BS 7956:2000Specification for primers for woodwork
STI/28
BS 7971-5:2004Protective clothing and equipment for use inviolent situations and in training. Footwear.Requirements and test methods
PH/3/12
BS 7971-10:2004Protective clothing and equipment for use inviolent situations and in training. Coveralls.Requirements and test methods
PH/3/12
BS 8000-2.2:1990Workmanship on building sites. Code ofpractice for concrete work. Sitework with in situand precast concrete
B/525/2
BS 8008:1996+A1:2008Safety precautions and procedures for theconstruction and descent of machine-boredshafts for piling and other purposes
B/526
BS 7188:1998+A2:2009Impact absorbing playground surfacing.Performance requirements and test methods
SW/65
BS 7371-2:1993Coatings on metal fasteners. Specification fortorque/clamping force relationship
FME/9/1
BS 7371-4:1994Coatings on metal fasteners. Specification forelectroplated nickel, nickel/chromium andcopper/nickel/chromium coatings
FME/9/1
BS 7371-6:1998Coatings on metal fasteners. Specification forhot dipped galvanized coatings
FME/9/1
BS 7371-8:1998Coatings on metal fasteners. Specification forsherardized coatings
FME/9/1
BS 7371-9:1996Coatings on metal fasteners. Specification forphosphate or phosphate and oil coatings
FME/9/1
BS 7371-10:1994Coatings on metal fasteners. Specification fororganic coatings
FME/9/1
BS 7581:1992Guide to presentation of tables and graphs
IDT/2
BS 7647:1993Specification for radio teleswitches for tariffand load control
PEL/13
BS 7668:2004Weldable structural steels. Hot finishedstructural hollow sections in weather resistantsteels. Specification
ISE/12
BS 7697:1993Nominal voltages for low voltage publicelectricity supply systems
GEL/8
BS 7801:2004Escalators and moving walks. Code of practicefor safe working on escalators and movingwalks
MHE/4
BS 7805-1:1995Swaged collar grooved rivets. Specification forsizes up to and including 10 mm diameter
FME/9/3
BS 6734:2004Antimicrobial efficacy of disinfectants forveterinary and agricultural use. Method
CH/216
BS 6785:1986Code of practice for solar heating systems forswimming pools
RHE/25
BS 6788-2:1990Neurosurgical implants. Specification formarking and packaging of implantable neuralstimulators
CH/150/3
BS 6806:2002Textiles. Determination of formaldehyde.Method for the determination of total and free(water extraction method) formaldehyde usingchromotropic acid
TCI/80
BS 6999:1989Specification for vitreous-enamelled low-carbon-steel flue pipes, other components andaccessories for solid-fuel-burning applianceswith a rated output of 45 kW
B/506
BS 7014:1989Guide to the romanization of Chinese
IDT/2
BS 7036-1:1996Code of practice for safety at powered doorsfor pedestrian use. General
MHE/31
BS 7036-2:1996Code of practice for safety at powered doorsfor pedestrian use. Straight and curved slidingdoors and prismatic and folding doors
MHE/31
BS 7036-3:1996Code of practice for safety at powered doorsfor pedestrian use. Swing doors and balanceddoors
MHE/31
BS 7036-4:1996Code of practice for safety at powered doorsfor pedestrian use. Low energy swing doors
MHE/31
BS 7036-5:1996Code of practice for safety at powered doorsfor pedestrian use. Revolving doors
MHE/31
BS 7172:1989Guide to assessment of position, size anddeparture from nominal form of geometricfeatures
TDW/4
British Standards Reviewed and Confirmed continued...
28 Update Standards Jan 2010Prices may be subject to change.
PD 0017:2001Business documents. Guidance on effectivelayout and presentation
IDT/2
PD 0018:2001Information management systems. Buildingsystems fit for audit
ICT/-
PD 0023:2001Test target for assessing output quality of black-and-white document scanners in accordancewith BS ISO 12653
IDT/1
PD 0028:2002Quantitative software management. Softwaremeasurement methods. A guide to the use ofISO/IEC and other standards for obtaining andusing software measurements for product andprocess improvement
IST/15
PD 6433:1969Guide to the application of stress analysis todesign
PVE/1
PD 6439:1969A review of the methods of calculating stressesdue to local loads and local attachments ofpressure vessels
PVE/1
PD 6461-4:2004General metrology. Practical guide tomeasurement uncertainty
SS/6
PD 6503-2:1988Toxicity of combustion products. Guide to therelevance of small-scale tests for measuring thetoxicity of combustion products of materialsand composites
FSH/16
PD 6631:1998Technical guide to ISO/IEC 13522-5:1997.Information technology. Coding of multimediaand hypermedia information. Support for base-level interactive applications (MHEG-5)
IST/37
PD 6777:2003Guide to practical implementation of JPEG 2000
IST/37
PD 7500:2003Knowledge management. Vocabulary
KMS/1
PD 7501:2003Managing culture and knowledge. Guide togood practice
KMS/1
BS EN 14662-4:2005Ambient air quality. Standard method formeasurement of benzene concentrations.Diffusive sampling followed by thermaldesorption and gas chromatography
EH/2/3
BS EN 14662-5:2005Ambient air quality. Standard method formeasurement of benzene concentrations.Diffusive sampling followed by solventdesorption and gas chromatography
EH/2/3
BS EN ISO 16000-9:2006Indoor air. Determination of the emission ofvolatile organic compounds from buildingproducts and furnishing. Emission test chambermethod
EH/2/3
BS EN ISO 16000-10:2006Indoor air. Determination of the emission ofvolatile organic compounds from buildingproducts and furnishing. Emission test cellmethod
EH/2/3
BS EN ISO 16000-11:2006Indoor air. Determination of the emission ofvolatile organic compounds from buildingproducts and furnishing. Sampling, storage ofsamples and preparation of test specimens
EH/2/3
BS ISO 5468:2006Rotary and rotary impact masonry drill bits withhardmetal tips. Dimensions
MTE/18
BS ISO 17560:2002Surface chemical analysis. Secondary-ion massspectrometry. Method for depth profiling ofboron in silicon
CII/60
BS ISO 20341:2003Surface chemical analysis. Secondary-ion massspectrometry. Method for estimating depthresolution parameters with multiple delta-layerreference materials
CII/60
PD CLC/TR 50373:2004Wind turbines. Electromagnetic compatibility
PEL/88
PD CLC/TR 50422:2003Guide for the application of the EuropeanStandard EN 50160
GEL/8
PD 0006:1995Technical guide to JPEG. Digital compression ofphotographic images
IST/37
PD 0016:2001Document scanning. Guide to scanning businessdocuments
ICT/-
BS 8204-2:2003+A1:2009Screeds, bases and in situ floorings. Concretewearing surfaces. Code of practice
B/507/6
BS 8204-3:2004+A1:2009Screeds, bases and in situ floorings. Polymermodified cementitious levelling screeds andwearing screeds. Code of practice
B/507/6
BS 8204-4:2004Screeds, bases and in situ floorings.Cementitious terrazo wearing surfaces. Code ofpractice
B/507/6
BS 8204-5:2004Screeds, bases and in situ floorings. Masticasphalt underlays and wearing surfaces. Codeof practice
B/507/6
BS 8427:2004Jug water filter systems. Specification
B/504
BS 8428:2004Protective clothing. Protection against liquidchemicals. Performance requirements forchemical protective suits with liquid-tightconnections between different parts of theclothing for emergency teams (type 3-ETequipment)
PH/3/3
BS 5252F:1976Colour matching fan
STI/14
DD 180:1989Guide for the assessment of toxic hazards in firein buildings and transport
FSH/16
BS EN 14662-1:2005Ambient air quality. Standard method formeasurement of benzene concentrations.Pumped sampling followed by thermaldesorption and gas chromatography
EH/2/3
BS EN 14662-2:2005Ambient air quality. Standard method formeasurement of benzene concentrations.Pumped sampling followed by solventdesorption and gas chromatography
EH/2/3
BS EN 14662-3:2005Ambient air quality. Standard method formeasurement of benzene concentrations.Automated pumped sampling with in situ gaschromatography
EH/2/3
Update Standards Jan 2010 Prices may be subject to change. 29
BS 5685-5:1987Electricity meters. Specification for input andoutput switching or logic arrangements formulti-rate registers for electricity meters
PEL/13
This standard has been re-declared as obsolescent asParts 1-4 have already been declared obsolescent
BS 5685-8:1991Electricity meters. Specification for impulseoperated multiple registers for use withinduction electricity meters
PEL/13
This standard has been re-declared as obsolescent asParts 1-4 have already been declared obsolescent
BS 7114-1:1988Fireworks. Classification of fireworks
CII/47
This standard has been re-declared as obsolescent asBS 7114 is being superseded by BS implementationsof the EN 14035 series but the new standards willbe issued over a period of about two years. BS 7114is cited in The Fireworks (Safety) Regulations 1997and the Regulations will not be revised until a fullset of standards is available. In the meantimesuppliers in the United Kingdom will be required bylaw to comply with BS 7114
BS 7114-2:1988Fireworks. Specification for fireworks
CII/47
This standard has been re-declared as obsolescent asBS 7114 is being superseded by BS implementationsof the EN 14035 series. The new standards will beissued over a period of about two years. BS 7114 iscited in The Fireworks (Safety) Regulations 1997 andthe Regulations will not be revised until a full set ofstandards is available. In the meantime suppliers inthe United Kingdom will be required by law tocomply with BS 7114
BS 7114-3:1988Fireworks. Methods of test for fireworks
CII/47
This standard has been re-declared as obsolescent asBS 7114 is being superseded by BS implementationsof the EN 14035 series. The new standards will beissued over a period of about two years. BS 7114 iscited in The Fireworks (Safety) Regulations 1997 andthe Regulations will not be revised until a full set ofstandards is available. In the meantime suppliers inthe United Kingdom will be required by law tocomply with BS 7114
BS 7208-2:1991Contact lenses. Method of classifying contactlens materials
CH/172
This standard has been re-declared as obsolescent asit is no longer relevant
BS 7332:1990Specification for decorative continuouslaminates (DCL) based on thermosetting resins
PRI/76
This standard has been declared as obsolescent as itis rarely used or referred to and is largelysuperseded by the BS EN 438 series which refers todifferent manufacturing parameters but covers thesame products
BS 1974:1953Specification for large aluminium alloy rivets (1⁄2in. to 1 in. nominal diameters)
FME/9/3
This standard has been re-declared as obsolescent asit is no longer used for current technologies
BS 3129:1959Specification for latex foam rubber componentsfor furniture
PRI/71
This standard has been re-declared as obsolescentfor a further period
BS 3575:1963Specification for rivets for the attachment offriction linings
FME/9/3
This standard has been re-declared as obsolescent asit is no longer used for current technologies
BS 3810-1:1964Glossary of terms used in materials handling.Terms used in connection with pallets, stillages,hand and powered trucks
MHE/7
This standard has been re-declared as obsolescentfor a further period as the national committeeconsiders it to be out of date and incomplete toreflect the current state of art
BS 3810-4:1968Glossary of terms used in materials handling.Terms used in connection with cranes
MHE/3/1
This standard has been re-declared as obsolescent asthe national committee considers it to be out ofdate and incomplete to reflect the current state ofart
BS 4620:1970Specification for rivets for general engineeringpurposes
FME/9/3
This standard has been re-declared as obsolescent asit is no longer used for current technologies
BS 4672-1:1971Guide to hazards in the transport and storageof packages. Climatic hazards
PKW/0
This standard has been re-declared as obsolescent asit is no longer relevant
BS 4672-2:1971Guide to hazards in the transport and storageof packages. Climatic hazards (maps anddiagrams)
PKW/0
This standard has been re-declared as obsolescent asit is no longer relevant
BS 5276-4:1977Pressure vessel details (dimensions).Standardized pressure vessels
PVE/1
This standard has been re-declared as obsolescent asit is no longer relevant
PD 7502:2003Guide to measurements in knowledgemanagement
KMS/1
PD 7503:2003Introduction to knowledge management inconstruction
KMS/1
PD 8010-1:2004Code of practice for pipelines. Steel pipelineson land
PSE/17/2
PD 8010-2:2004Code of practice for pipelines. Subsea pipelines
PSE/17/2
BS AU 170:1979Methods for measurement of reflectance ofrear view mirrors
AUE/12
CP 2010-2:1970Code of practice for pipelines. Design andconstruction of steel pipelines in land
PSE/17
CP 2012-1:1974Code of practice for foundations for machinery.Foundations for reciprocating machines
B/526
BRITISH STANDARDSDECLARED OBSOLESCENT
Declaration of obsolescence indicates thatthe standard is not recommended for usein new equipment but needs to beretained for the servicing of existingequipment that is expected to have along working life.
BS 275:1927Specification for dimensions of rivets (1⁄2 inch to13⁄4 inch diameter)
FME/9/3
This standard has been re-declared as obsolescent asit is no longer used for current technologies
BS 641:1951Dimensions of small rivets for general purposes
FME/9/3
This standard has been re-declared as obsolescent asit is no longer used for current technologies
BS 1109:1943Specification for cold forged mild steel rivetsfor cold closing
FME/9/3
This standard has been re-declared as obsolescent asit is no longer used for current technologies
British Standards Reviewed and Confirmed continued...
30 Update Standards Jan 2010Prices may be subject to change.
BRITISH STANDARDSPROPOSED FORWITHDRAWAL
A note of any objections to thesewithdrawals should be sent to DebbieStead, Head of Committee Service Centre– Operations, BSI Head Office, 389Chiswick High Road, London W4 4AL orvia email [email protected] by28 February, 2010.
Where any standard in this list has beenamended since publication, a proposal towithdraw also includes all amendmentspublished to date.
BS 4899-1:1991Guide to user’s requirements for technicalmanuals (based on the principles of BS 4884).Content
DS/1
This standard has been proposed for withdrawal asit conflicts with BS EN 62079:2001
BS 4899-2:1992Guide to user’s requirements for technicalmanuals (based on the principles of BS 4884).Presentation
DS/1
This standard has been proposed for withdrawal asit conflicts with BS EN 62079:2001
BRITISH STANDARDSWITHDRAWN
If any standard in this list has beenamended since publication, allamendments published to date are alsowithdrawn
BS 3015:1991Glossary of terms relating to mechanicalvibration and shock
GME/21/1
Superseded by BS ISO 2041:2009
BS 3483-B3:1982Methods for testing pigments for paints.Determination of residue on sieve (watermethod, using a manual procedure)
STI/1
Superseded by BS EN ISO 787-7:2009
BS 4361-0:1990Woodworking machines. Classification ofwoodworking machines and auxiliary machinesused for woodworking
MTE/23
This standard had been superseded byBS EN 861:1998, but was never withdrawn.BS EN 861:1998 has since been withdrawn andsuperseded by BS EN 861:2007
BS L 170:1989Specification for extruded bars and sections ofaluminium-zinc-copper-chromium alloy(solution treated, controlled stretched andartificially aged) (not exceeding 150 mmdiameter or minor sectional dimension) (Zn 5.6,Mg 2.5, Cu 1.6, Cr 0.23) (7075)
ACE/61/-/24
This standard has been re-declared as obsolescentfor a further period
BS 5X 17:1998Specification for oleoresinous varnish foraerospace purposes
ACE/65/-/3
This standard has been re-declared as obsolescentfor a further period as although there are stilldemands for this product to be used, thespecification would not be used for newtechnologies or designs
BS HC 401:1974Specification for 18% nickel maraging steelprecision castings (1600-1850 MPa)
ACE/61/-/15
This standard has been re-declared as obsolescentfor a further period as it is no longer required fornew designs
BS HC 402:1977Specification for cast iron ring pots(centrifugally cast) (suitable for piston rings upto 200 mm in diameter)
ACE/61/-/15
This standard has been re-declared as obsolescentfor a further period as it is no longer required fornew designs
BS SP 57 and 58:1955Specifications for rivet burrs for aircraft
ACE/12
This standard has been re-declared as obsolescentfor a further period
CP 143-1:1958Code of practice for sheet roof and wallcoverings. Aluminium, corrugated and troughed
B/542/6
This standard has been re-declared as obsolescent asit is no longer relevant
BS 7881:1997Method of test for petrol filters
MCE/21/6
This standard has been re-declared as obsolescentfor a further period as it is not used in theUK industry where filter companies have invested infar more sophisticated instruments to measureparticle size in fluids. The standard is retained asthere may still be a need for the standard in lessdeveloped countries where companies have not, orare unable to invest in modern instruments.However, MCE/21/6 will not maintain the standardas there is not any expertise available in this field
BS 9000-1:1989General requirements for a system forelectronic components of assessed quality.Specification of general procedures
EPL/40X
This standard has been re-declared as obsolescentfor a further period
BS 9000-5:1989General requirements for a system forelectronic components of assessed quality.Specification of qualification approval andconformance testing procedures
EPL/40X
This standard has been re-declared as obsolescentfor a further period
BS 9000-6:1989General requirements for a system forelectronic components of assessed quality.Specification of capability approval procedures
EPL/40X
This standard has been re-declared as obsolescentfor a further period
BS 9000-7:1989General requirements for a system forelectronic components of assessed quality.Specification of lot formation, releaseprocedures and certified test records
EPL/40X
This standard has been re-declared as obsolescentfor a further period
PD 6505:1982Guide to the romanization of Korean
IDT/2
This standard has been re-declared as obsolescent asit is no longer relevant
PD 6510:1983A review of the present state of the art ofassessing remanent life of pressure vessels andpressurized systems designed for hightemperature service
PVE/1
This standard has been re-declared as obsolescentby PVE/1 as there is no available expertise or desireto review and/or update the document, althoughthe content is still valuable in support of pressurevessels and boilers. It contains important contentthat is not documented in any other British Standardor Published Document and as such should remainavailable
Update Standards Jan 2010 Prices may be subject to change. 31
Please
do not send
confirmation
of
orders placed by
telephone
as it can lead to
duplication
DD CEN/TS 15749:2008Fertilizers. Determination of sulfates contentusing three different methods
CII/37
Superseded by BS EN 15749:2009
BS EN 20287:1994Paper and board. Determination of moisturecontent. Oven-drying method
PAI/11
Superseded by BS EN ISO 287:2009
BS EN 23907:1993Hardmetals. Determination of total carboncontent. Gravimetric method
ISE/65
Superseded by BS EN ISO 3907:2009
BS EN 29117:1992Methods of test for paints. Tests associated withpaint film formation. Paints and varnishes.Determination of through-dry state andthrough-dry time. Method of test
STI/10
Superseded by BS EN ISO 9117-1:2009
BS CECC 41000:1977Harmonized system of quality assessment forelectronic components: generic specification forpotentiometers
EPL/40X
Superseded by BS EN 60393-1:2009
BS ISO 2470:1999Paper, board and pulps. Measurement of diffuseblue reflectance factor (ISO brightness)
I/-
Superseded by BS ISO 2470-1:2009
BS ISO 4918:2009Resilient, textile and laminate floor coverings.Castor chair test
PRI/60
This standard has been withdrawn as it conflictswith BS EN standards already covering these tests.They are BS EN 985:2001 and BS EN 425:2002
BS 7854-4:1998Mechanical vibration. Evaluation of machinevibration by measurements on non-rotatingparts. Gas turbine driven sets excluding aircraftderivatives
GME/21/5
Superseded by BS ISO 10816-4:2009
BS 8409:2002Soft indoor play areas. Code of practice
SW/65
Superseded by BS 8409:2009 and BS EN 1176-10:2008
BS EN 1176-1:1998Playground equipment. General safetyrequirements and test methods
SW/65
Superseded by BS EN 1176-1:2008
BS EN 1176-2:1998Playground equipment. Additional specificsafety requirements and test methods forswings
SW/65
Superseded by BS EN 1176-2:2008
BS EN 1176-3:1998Playground equipment. Additional specificsafety requirements and test methods for slides
SW/65
Superseded by BS EN 1176-3:2008
BS EN 1176-4:1998Playground equipment. Additional specificsafety requirements and test methods forrunways
SW/65
Superseded by BS EN 1176-4:2008
BS EN 1176-5:1999Playground equipment. Additional specificsafety requirements and test methods forcarousels
SW/65
Superseded by BS EN 1176-5:2008
BS EN 1176-6:1998Playground equipment. Additional specificsafety requirements and test methods forrocking equipment
SW/65
Superseded by BS EN 1176-6:2008
BS EN 1176-7:1997Playground equipment. Guidance oninstallation, inspection, maintenance andoperation
SW/65
Superseded by BS EN 1176-7:2008
DD ENV 14232:2003Advanced technical ceramics. Terms, definitionsand abbreviations
RPI/13
Superseded by BS EN 14232:2009
BS 4361-20:1990Woodworking machines. Specification for singleblade circular sawing machines with travellingtable
MTE/23
This standard had been superseded by BS EN1870-1:1999, but was never withdrawn.BS EN 1870-1:1999 has since been withdrawn and superseded by BS EN 1870-1:2007
BS 4361-39:1990Woodworking machines. Nomenclature forcircular sawing machines for building sites
MTE/23
This standard had been superseded by BS EN1870-1:1999, but was never withdrawn.BS EN 1870-1:1999 has since been withdrawn and superseded by BS EN 1870-1:2007
BS 4585-1:1983Methods of test for spices and condiments.Determination of extraneous matter
AW/7
Superseded by BS EN ISO 927:2009
BS 6127-2:1982Petrographic analysis of bituminous coal andanthracite. Method of preparing coal samplesfor petrographic analysis
PTI/15
Superseded by BS ISO 7404-2:2009
BS 6127-3:1995Petrographic analysis of bituminous coal andanthracite. Method of determining maceralgroup composition of bituminous coal andanthracite
PTI/16
Superseded by BS ISO 7404-3:2009
BS 6127-5:1995Petrographic analysis of bituminous coal andanthracite. Method of determiningmicroscopically the reflectance of vitrinite
PTI/16
Superseded by BS ISO 7404-5:2009
BS 6290-4:1997Lead-acid stationary cells and batteries.Specification for classifying valve regulatedtypes
PEL/21
Superseded by BS EN 60896-21:2004 andBS EN 60896-22:2004
BS 6955-11:1994Calibration of vibration and shock pick-ups.Method of test for transverse vibrationsensitivity
GME/21/2
Superseded by BS ISO 16063-31:2009
BS 7545:1991Method for removal of corrosion products fromcorrosion test specimens of metals and alloys
ISE/NFE/8
Superseded by BS ISO 8407:2009
British Standards Withdrawn continued...
32 Update Standards Jan 2010Prices may be subject to change.
Help Us to Help
You!
Always quote your Customer Number
Don’t know your number?
Contact Customer Services
020 8996 9001
who will be happy to check it for you
BS 6068-2.49:1995(ISO 10566:1994)Water quality. Physical, chemical andbiochemical methods. Determination ofaluminium. Spectrometric method usingpyrocatechol violet
EH/3/2
BS 6325:1982(ISO 6078:1982)Glossary of terms relating to black tea
AW/8
BS 6362:1990(ISO 7598:1988)Specification for stainless steel tubes suitablefor screwing in accordance with BS 21 ’Pipethreads for tubes and fittings where pressure-tight joints are made on the threads’
ISE/8
BS 6590:1985(ISO 6898:1984)Specification for capacity ratings anddimensions of power presses, mechanical openfront type
MTE/1
BS 6986-2:1988(ISO 6770:1982)Analysis of instant tea. Methods fordetermination of free-flow and compacted bulkdensities
AW/8
BS 7030:1988(ISO 7991:1987)Method for determination of the coefficient ofmean linear thermal expansion of glass
LBI/36
BS 7034-2:1988(ISO 7884-2:1987)Viscosity and viscometric fixed points of glass.Method for the determination of viscosity byrotation viscometers
LBI/36
BS 7034-3:1988(ISO 7884-3:1987)Viscosity and viscometric fixed points of glass.Method for the determination of viscosity byfibre elongation viscometer
LBI/36
BS 7034-4:1988(ISO 7884-4:1987)Viscosity and viscometric fixed points of glass.Method for the determination of viscosity bybeam bending
LBI/36
BS 7034-5:1988(ISO 7884-5:1987)Viscosity and viscometric fixed points of glass.Method for the determination of working pointby sinking bar viscometer
LBI/36
BS 6049-2:1981(ISO 1573:1980)Methods of test for tea. Determination of lossin mass at 103ºC
AW/8
BS 6049-4:1988(ISO 1575:1987)Methods of test for tea. Determination of totalash
AW/8
BS 6049-5:1989(ISO 1576:1988)Methods of test for tea. Determination ofwater-soluble ash and water-insoluble ash
AW/8
BS 6049-6:1988(ISO 1577:1987)Methods of test for tea. Determination of acid-insoluble ash
AW/8
BS 6049-7:1981(ISO 1578:1975)Methods of test for tea. Determination ofalkalinity of water-soluble ash
AW/8
BS 6068-1.4:1993(ISO 6107-4:1993)Water quality. Glossary. An additional 18 terms
EH/3
BS 6068-2.31:1987(ISO 6333:1986)Water quality. Physical, chemical andbiochemical methods. Method fordetermination of manganese: formaldoximespectrometric method
EH/3/2
BS 6068-2.37:1990(ISO 9297:1989)Water quality. Physical, chemical andbiochemical methods. Method for thedetermination of chloride via a silver nitratetitration with chromate indicator (Mohr’smethod)
EH/3/2
BS 6068-2.47:1995(ISO 11083:1994)Water quality. Physical, chemical andbiochemical methods. Determination ofchromium (VI). Spectrometric method using 1,5-diphenylcarbazide
EH/3/2
BS 6068-2.48:1995(ISO 10359-2:1994)Water quality. Physical, chemical andbiochemical methods. Determination ofinorganically bound total fluoride afterdigestion and distillation
EH/3/2
BRITISH STANDARDS UNDERREVIEW
The following British Standardsimplement International and/or EuropeanStandards which are currently underreview to see if they should be confirmed,revised or withdrawn.
Comments are welcome and should besent to Debbie Stead, Head of CommitteeService Centre – Operations, BSI HeadOffice, 389 Chiswick High Road, LondonW4 4AL or via email [email protected] by28 February, 2010, in order to beconsidered by the relevantUK Committee.
BS 3680-8H:1996(ISO 11655:1995)Measurement of liquid flow in open channels.Measuring instruments and equipment. Methodof specifying the performance of hydrometricequipment
CPI/113/5
BS 3900-F15:1995(ISO 11503:1995)Methods of test for paints. Determination ofresistance to humidity (intermittentcondensation)
STI/10
BS 4499:1984(ISO 692:1982)Method for determination of alkali solubility ofpulp
I/-
BS 4656-34:1985(ISO 6899:1984)Accuracy of machine tools and methods of test.Specification for power presses, mechanicalopen front type
MTE/1
BS 4747-2:1995(ISO 801-2:1994)Methods for determination of saleable mass, inlots, of pulp. Pulps (such as flash-dried pulps)baled in slabs
I/-
BS 5898:1980(ISO 384:1978)Specification for principles of design andconstruction of volumetric glassware forlaboratory use
LBI/36
BS 6049-1:1981(ISO 1572:1980)Methods of test for tea. Preparation of groundsample of known dry matter content
AW/8
Update Standards Jan 2010 Prices may be subject to change. 33
BS EN ISO 2812-3:2007Paints and varnishes. Determination ofresistance to liquids. Method using anabsorbent medium
STI/10
BS EN ISO 2812-4:2007Paints and varnishes. Determination ofresistance to liquids. Spotting methods
STI/10
BS EN ISO 2812-5:2007Paints and varnishes. Determination ofresistance to liquids. Temperature-gradientoven method
STI/10
BS EN ISO 3059:2001Non-destructive testing. Penetrant testing andmagnetic particle testing. Viewing conditions
WEE/46
BS EN ISO 3166-1:2006Codes for the representation of names ofcountries and their subdivisions. Country codes
IDT/2/11
BS EN ISO 3678:1995(BS 3900-C8:1978)Paints and varnishes. Print-free test
STI/10
BS EN ISO 3822-1:1999+A1:2008Acoustics. Laboratory tests on noise emissionfrom appliances and equipment used in watersupply installations. Method of measurement
EH/1/6
BS EN ISO 4623-1:2002(BS 3900-F13:2002)Paints and varnishes. Determination ofresistance to filiform corrosion. Steel substrates
STI/10
BS EN ISO 5267-1:2001Pulps. Determination of drainability. Schopper-Riegler method
PAI/11
BS EN ISO 5455:1995(BS 308-1.4:1995)Technical drawings. Scales
TDW/4
BS EN ISO 5667-1:2006(BS 6068-6.1:2006)Water quality. Sampling. Guidance on thedesign of sampling programmes and samplingtechniques
EH/3/6
BS EN ISO 5961:1995(BS 6068-2.21:1995)Water quality. Determination of cadmium byatomic absorption spectrometry
EH/3/2
BS 7709-6:1993(ISO 10136-6:1993)Analysis of extract solutions of glass. Methodfor determination of boron (III) oxide bymolecular absorption spectrometry
LBI/36
DD 234:1996(ISO/TR 11211:1995)Grading polished diamonds. Terminology andclassification
STI/53
BS EN ISO 140-18:2006Acoustics. Measurement of sound insulation inbuildings and of building elements. Laboratorymeasurement of sound generated by rainfall onbuilding elements
EH/1/6
BS EN ISO 801-1:1997Pulps. Determination of saleable mass in lots.Pulp baled in sheet form
I/-
BS EN ISO 801-3:1997Pulps. Determination of saleable mass in lots.Unitized bales
I/-
BS EN ISO 1524:2002(BS 3900-C6:2000)Paints, varnishes and printing inks.Determination of fineness of grind
STI/10
BS EN ISO 2692:2006Geometrical product specifications (GPS).Geometrical tolerancing. Maximum materialrequirement (MMR), least material requirement(LMR) and reciprocity requirement (RPR)
TDW/4
BS EN ISO 2806:1997Industrial automation systems. Numericalcontrol of machines. Vocabulary
AMT/4
BS EN ISO 2808:2007(BS 3900-C5:2007)Paints and varnishes. Determination of filmthickness
STI/10
BS EN ISO 2812-1:2007Paints and varnishes. Determination ofresistance to liquids. Immersion in liquids otherthan water
STI/10
BS EN ISO 2812-2:2007Paints and varnishes. Determination ofresistance to liquids. Water immersion method
STI/10
BS 7034-6:1988(ISO 7884-6:1987)Viscosity and viscometric fixed points of glass.Method for the determination of softeningpoint
LBI/36
BS 7034-7:1988(ISO 7884-7:1987)Viscosity and viscometric fixed points of glass.Method for the determination of annealingpoint and strain point by beam bending
LBI/36
BS 7034-8:1988(ISO 7884-8:1987)Viscosity and viscometric fixed points of glass.Method for the determination of (dilatometric)transformation temperature
LBI/36
BS 7463-6:1995(ISO 9184-6:1994)Fibre furnish analysis of paper, board and pulps.Determination of fibre coarseness
I/-
BS 7463-7:1995(ISO 9184-7:1994)Fibre furnish analysis of paper, board and pulps.Determination of weight factors
I/-
BS 7709-1:1993(ISO 10136-1:1993)Analysis of extract solutions of glass. Methodfor determination of silicon dioxide bymolecular absorption spectrometry
LBI/36
BS 7709-2:1993(ISO 10136-2:1993)Analysis of extract solutions of glass. Methodfor determination of sodium oxide andpotassium oxide by flame spectrometricmethods
LBI/36
BS 7709-3:1993(ISO 10136-3:1993)Analysis of extract solutions of glass. Methodfor determination of calcium oxide andmagnesium oxide by flame atomic absorptionspectrometry
LBI/36
BS 7709-4:1993(ISO 10136-4:1993)Analysis of extract solutions of glass. Methodfor determination of aluminium oxide bymolecular absorption spectrometry
LBI/36
BS 7709-5:1993(ISO 10136-5:1993)Analysis of extract solutions of glass. Methodfor determination of iron (III) oxide bymolecular absorption spectrometry and flameatomic absorption spectrometry
LBI/36
British Standards Under Review continued...
34 Update Standards Jan 2010Prices may be subject to change.
BS EN ISO 11997-2:2006(BS 3900-F19:2006)Paints and varnishes. Determination ofresistance to cyclic corrosion conditions. Wet(salt fog)/dry/humidity/UV light
STI/10
BS EN ISO 12213-1:2009Natural gas. Calculation of compression factor.Introduction and guidelines
PTI/15
BS EN ISO 12213-2:2009Natural gas. Calculation of compression factor.Calculation using molar-composition analysis
PTI/15
BS EN ISO 12213-3:2009Natural gas. Calculation of compression factor.Calculation using physical properties
PTI/15
BS EN ISO 12944-5:2007Paints and varnishes. Corrosion protection ofsteel structures by protective paint systems.Protective paint systems
STI/27
BS EN ISO 13503-4:2006Petroleum and natural gas industries.Completion fluids and materials. Procedure formeasuring stimulation and gravel-pack fluidleakoff under static conditions
PSE/17/-/3
BS EN ISO 13703:2000Petroleum and natural gas industries. Designand installation of piping systems on offshoreproduction platforms
PSE/17
BS EN ISO 13704:2007Petroleum, petrochemical and natural gasindustries. Calculation of heater-tube thicknessin petroleum refineries
PSE/17/-/6
BS EN ISO 13716:2000Dentistry. Reversible-irreversible hydrocolloidimpression material systems
CH/106/2
BS EN ISO 13803:2004(BS 3900-D13:2000)Paints and varnishes. Determination ofreflection haze on paint films at 20 degrees
STI/10
BS EN ISO 13849-1:2008Safety of machinery. Safety-related parts ofcontrol systems. General principles for design
MCE/3
BS EN ISO 13850:2008Safety of machinery. Emergency stop. Principlesfor design
MCE/3
BS EN ISO 9963-1:1996(BS 6068-2.51:1996)Water quality. Determination of alkalinity.Determination of total and composite alkalinity
EH/3/2
BS EN ISO 9963-2:1996(BS 6068-2.52:1996)Water quality. Determination of alkalinity.Determination of carbonate alkalinity
EH/3/2
BS EN ISO 10438-1:2007Petroleum, petrochemical and natural gasindustries. Lubrication, shaft-sealing andcontrol-oil systems and auxiliaries. Generalrequirements
PSE/17/-/6
BS EN ISO 10438-2:2007Petroleum, petrochemical and natural gasindustries. Lubrication, shaft-sealing andcontrol-oil systems and auxiliaries. Special-purpose oil systems
PSE/17/-/6
BS EN ISO 10438-3:2007Petroleum, petrochemical and natural gasindustries. Lubrication, shaft-sealing andcontrol-oil systems and auxiliaries. General-purpose oil systems
PSE/17/-/6
BS EN ISO 10438-4:2007Petroleum, petrochemical and natural gasindustries. Lubrication, shaft-sealing andcontrol-oil systems and auxiliaries. Self-actinggas seal support systems
PSE/17/-/6
BS EN ISO 10441:2007Petroleum, petrochemical and natural gasindustries. Flexible couplings for mechanicalpower transmission. Special-purposeapplications
PSE/17/-/6
BS EN ISO 11091:1999Construction drawings. Landscape drawingpractice
B/555
BS EN ISO 11126-10:2004(BS 7079-F10:2004)Preparation of steel substrates beforeapplication of paints and related products.Specifications for non-metallic blast-cleaningabrasives. Almandite garnet
STI/21
BS EN ISO 11507:2007(BS 3900-F16:2007)Paints and varnishes. Exposure of coatings toartificial weathering. Exposure to fluorescentUV lamps and water
STI/10
BS EN ISO 6222:1999(BS 6068-4.5:1999)Water quality. Enumeration of culturable micro-organisms. Colony count by inoculation in anutrient agar culture medium
EH/3/4
BS EN ISO 7027:2000(BS 6068-2.13:2000)Water quality. Determination of turbidity
EH/3/2
BS EN ISO 7500-2:2006Metallic materials. Verification of static uniaxialtesting machines. Tension creep testingmachines. Verification of the applied force
ISE/NFE/4/1
BS EN ISO 7784-3:2006(BS 3900-E16:2000)Paints and varnishes. Determination ofresistance to abrasion. Reciprocating test panelmethod
STI/10
BS EN ISO 7980:2000(BS 6068-2.30:1987)Water quality. Determination of calcium andmagnesium. Atomic absorption spectrometricmethod
EH/3/2
BS EN ISO 8044:2000Corrosion of metals and alloys. Basic terms anddefinitions
ISE/NFE/8
BS EN ISO 8501-1:2007Preparation of steel substrates beforeapplication of paints and related products.Visual assessment of surface cleanliness. Rustgrades and preparation grades of uncoatedsteel substrates and of steel substrates afteroverall removal of previous coatings
STI/21
BS EN ISO 8504-1:2001(BS 7079-D1:2000)Preparation of steel substrates beforeapplication of paints and related products.Surface preparation methods. General principles
STI/21
BS EN ISO 8504-2:2001(BS 7079-D2:2000)Preparation of steel substrates beforeapplication of paints and related products.Surface preparation methods. Abrasive blastcleaning
STI/21
BS EN ISO 9706:2000Information and documentation. Paper fordocuments. Requirements for permanence
I/-
BS EN ISO 9934-1:2001Non-destructive testing. Magnetic particletesting. General principles
WEE/46
Update Standards Jan 2010 Prices may be subject to change. 35
BS EN ISO 15792-3:2008Welding consumables. Test methods.Classification testing of positional capacity androot penetration of welding consumables in afillet weld
WEE/39
BS EN ISO 15841:2006Dentistry. Wires for use in orthodontics
CH/106/1
BS EN ISO 16266:2008Water quality. Detection and enumeration ofPseudomonas aeruginosa. Method bymembrane filtration
EH/3/4
BS EN ISO 16276-1:2007Corrosion protection of steel structures byprotective paint systems. Assessment of, andacceptance criteria for, the adhesion/cohesion(fracture strength) of a coating. Pull-off testing
STI/27
BS EN ISO 16276-2:2007Corrosion protection of steel structures byprotective paint systems. Assessment of, andacceptance criteria for, the adhesion/cohesion(fracture strength) of a coating. Cross-cuttesting and X-cut testing
STI/27
BS EN ISO 16773-1:2007Paints and varnishes. Electrochemicalimpedance spectroscopy (EIS) on high-impedance coated specimens. Terms anddefinitions
STI/10
BS EN ISO 16773-2:2007Paints and varnishes. Electrochemicalimpedance spectroscopy (EIS) on high-impedance coated specimens. Collection of data
STI/10
BS EN ISO 17132:2007Paints and varnishes. T-bend test
STI/10
BS EN ISO 17776:2002Petroleum and natural gas industries. Offshoreproduction installations. Guidance on tools andtechniques for hazard identification and riskassessment
PSE/17
BS EN ISO 17872:2007Paints and varnishes. Guidelines for theintroduction of scribe marks through coatingson metallic panels for corrosion testing
STI/10
BS EN ISO 19903:2006Petroleum and natural gas industries. Fixedconcrete offshore structures
B/525/12
BS EN ISO 15181-1:2007Paints and varnishes. Determination of releaserate of biocides from antifouling paints.General method for extraction of biocides
STI/10
BS EN ISO 15181-2:2007Paints and varnishes. Determination of releaserate of biocides from antifouling paints.Determination of copper-ion concentration inthe extract and calculation of the release rate
STI/10
BS EN ISO 15181-3:2007(BS 3900-K3:2007)Paints and varnishes. Determination of releaserate of biocides from antifouling paints.Calculation of the zinc ethylene-bis(dithiocarbamate)(zineb) release rate bydetermination of the concentration ofethylenethiourea in the extract
STI/10
BS EN ISO 15318:2000Pulp, paper and board. Determination of 7specified polychlorinated biphenyls (PCB)
I/-
BS EN ISO 15403-1:2008Natural gas. Natural gas for use as acompressed fuel for vehicles. Designation of thequality
PTI/15
BS EN ISO 15528:2000Paints, varnishes and raw materials for paintsand varnishes. Sampling
STI/10
BS EN ISO 15535:2006General requirements for establishinganthropometric databases
PH/9/4
DD CEN/TS 15674:2007Air quality. Measurement of stationary sourceemissions. Guidelines for the elaboration ofstandardised methods
EH/2/1
DD CEN/TS 15675:2007Air quality. Measurement of stationary sourceemissions. Application of EN ISO/IEC 17025:2005to periodic measurements
EH/2/1
BS EN ISO 15792-1:2008Welding consumables. Test methods. Testmethods for all-weld metal test specimens insteel, nickel and nickel alloys
WEE/39
BS EN ISO 15792-2:2008Welding consumables. Test methods.Preparation of single-run and two-runtechnique test specimens in steel
WEE/39
BS EN ISO 14224:2006Petroleum, petrochemical and natural gasindustries. Collection and exchange of reliabilityand maintenance data for equipment
PSE/17
BS EN ISO 14270:2001Specimen dimensions and procedure formechanized peel testing resistance spot, seamand embossed projection welds
WEE/2
BS EN ISO 14272:2001Specimen dimensions and procedure for crosstension testing resistance spot and embossedprojection welds
WEE/2
BS EN ISO 14273:2001Specimen dimensions and procedure for sheartesting resistance spot, seam and embossedprojection welds
WEE/2
BS EN ISO 14402:1999(BS 6068-2.68:1999)Water quality. Determination of phenol indexby flow analysis (FIA and CFA)
EH/3/2
BS EN ISO 14505-2:2006Ergonomics of the thermal environment.Evaluation of thermal environments in vehicles.Determination of equivalent temperature
PH/9/1
BS EN ISO 14680-1:2006(BS 3900-A26:2006)Paints and varnishes. Determination of pigmentcontent. Centrifuge method
STI/10
BS EN ISO 14680-2:2006(BS 3900-A27:2006)Paints and varnishes. Determination of pigmentcontent. Ashing method
STI/10
BS EN ISO 14680-3:2006(BS 3900-A28:2000)Paints and varnishes. determination of pigmentcontent. Filtration method
STI/10
BS EN ISO 14731:2006Welding coordination. Tasks and responsibilities
WEE/36
BS EN 14884:2005Air quality. Stationary source emissions.Determination of total mercury: automatedmeasuring systems
EH/2/1
BS EN ISO 15138:2007Petroleum and natural gas industries. Offshoreproduction installations. Heating, ventilationand air-conditioning
PSE/17/-/6
British Standards Under Review continued...
36 Update Standards Jan 2010Prices may be subject to change.
BS ISO 8820-6:2007Road vehicles. Fuse-links. Single-bolt fuse-links
AUE/16
BS ISO 8820-7:2007Road vehicles. Fuse-links. Fuse-links with tabs(Type G) with rated voltage of 450 V
AUE/16
BS ISO/IEC 9281-1:1990Information technology. Picture codingmethods. Identification
IST/37
BS ISO/IEC 9281-2:1990Information technology. Picture codingmethods. Procedure for registration
IST/37
BS ISO 10303-11:1994Industrial automation systems and integration.Product data representation and exchange.Description methods: the EXPRESS languagereference manual
AMT/4
BS ISO 10716:1994Paper and board. Determination of alkalireserve
I/-
BS ISO 10754:1996Information and documentation. Extension ofthe Cyrillic alphabet coded character set fornon-slavic languages for bibliographicinformation interchange
IDT/2/7
BS ISO 11056:1999Sensory analysis. Methodology. Magnitudeestimation method
AW/12
BS ISO 11093-9:2006Paper and board. Testing of cores.Determination of flat crush resistance
PAI/11
BS ISO 11108:1996Information and documentation. Archivalpaper. Requirements for permanence anddurability
I/-
BS ISO 11451-3:2007Road vehicles. Vehicle test methods forelectrical disturbances from narrowbandradiated electromagnetic energy. On-boardtransmitter simulation
AUE/16
BS ISO 11452-8:2007Road vehicles. Component test methods forelectrical disturbances from narrowbandradiated electromagnetic energy. Immunity tomagnetic fields
AUE/16
BS ISO 128-23:1999Technical drawings. General principles ofpresentation. Lines on construction drawings
B/555
BS ISO 230-7:2006Test code for machine tools. Geometric accuracyof axes of rotation
MTE/1
BS ISO 3688:1999Pulps. Preparation of laboratory sheets for themeasurement of diffuse blue reflectance factor(ISO brightness)
I/-
BS ISO 4190-5:2006Lift (elevator) installation. Control devices,signals and additional fittings
MHE/4
DD ISO/TS 5658-1:2006Reaction to fire tests. Spread of flame.Guidance on flame spread
FSH/21
BS ISO 6107-2:2006(BS 6068-1.2:2006)Water quality. Vocabulary. Part 2
EH/3
BS ISO 6107-3:1993(BS 6068-1.3:1993)Water quality. Vocabulary. Part 3
EH/3
BS ISO 6107-8:1993(BS 6068-1.8:1993)Water quality. Vocabulary. Part 8
EH/3
BS ISO 7176-1:1999Wheelchairs. Determination of static stability
CH/173/1
BS ISO 7176-8:1998Wheelchairs. Requirements and test methodsfor static, impact and fatigue strengths
CH/173/1
BS ISO 7637-3:2007Road vehicles. Electrical disturbances fromconduction and coupling. Electrical transienttransmission by capacitive and inductivecoupling via lines other than supply lines
AUE/16
BS ISO 8587:2006Sensory analysis. Methodology. Ranking
AW/12
BS ISO 8820-5:2007Road vehicles. Fuse-links. Fuse-links with axialterminals (strip fuse-links) types SF 30 and SF 51and test fixtures
AUE/16
BS EN ISO 19904-1:2006Petroleum and natural gas industries. Floatingoffshore structures. Monohulls, semi-submersibles and spars
B/525/12
BS EN ISO 20776-1:2006Clinical laboratory testing and in vitrodiagnostic test systems. Susceptibility testing ofinfectious agents and evaluation ofperformance of antimicrobial susceptibility testdevices. Reference method for testing the invitro activity of antimicrobial agents againstrapidly growing aerobic bacteria involved ininfectious diseases
CH/212
BS EN ISO 21227-3:2007Paints and varnishes. Evaluation of defects oncoated surfaces using optical imaging.Evaluation of delamination and corrosionaround a scribe
STI/10
BS EN ISO 21427-2:2009(BS 6068-5.45:2006)Water quality. Evaluation of genotoxicity bymeasurement of the induction of micronuclei.Mixed population method using the cell lineV79
EH/3/5
BS EN ISO 21952:2007Welding consumables. Wire electrodes, wires,rods and deposits for gas-shielded arc weldingof creep-resisting steel. Classification
WEE/39
BS EN ISO 22032:2009(BS 6068-2.99:2006)Water quality. Determination of selectedpolybrominated diphenyl ethers in sedimentand sewage sludge. Method using extractionand gas chromatography/mass spectrometry
EH/3/2
BS EN ISO 22674:2006Dentistry. Metallic materials for fixed andremovable restorations and appliances
CH/106/2
BS EN ISO 24598:2007Welding consumables. Solid wire electrodes,tubular cored electrodes and electrode/fluxcombinations for submerged arc welding ofcreep-resisting steels. Classification
WEE/39
BS EN 29052-1:1992(ISO 9052-1:1989)Acoustics. Method for the determination ofdynamic stiffness. Materials used under floatingfloors in dwellings
EH/1
BS ISO 128-22:1999Technical drawings. General principles ofpresentation. Basic conventions andapplications for leader lines and reference lines
TDW/4
Update Standards Jan 2010 Prices may be subject to change. 37
BS ISO 22472:2006Ships and marine technology. Guidelines for theinstallation and operation of voyage datarecorders (VDR)
EPL/80
BS ISO 23874:2006Natural gas. Gas chromatographic requirementsfor hydrocarbon dewpoint calculation
PTI/15
BS ISO 24497-1:2007Non-destructive testing. Metal magneticmemory. Vocabulary
WEE/46
BS ISO 24497-2:2007Non-destructive testing. Metal magneticmemory. General requirements
WEE/46
BS ISO 24497-3:2007Non-destructive testing. Metal magneticmemory. Inspection of welded joints
WEE/46
DD ISO/TS 24817:2006Petroleum, petrochemical and natural gasindustries. Composite repairs for pipework.Qualification and design, installation, testingand inspection
PSE/17/-/6
BS ISO 28077:2006Photocarcinogenesis action spectrum (non-melanoma skin cancers)
CH/100
BS AU 50-1.6.3a:1995(ISO 6054-1:1994)Tyres and wheels. Tyres. Motorcycle tyres.Specifications for designations, dimensions andload ratings for code designated series(diameter codes 4 to 12) tyres
AUE/4
BS AU 50-4.6.3:1991(ISO 6054-2:1990)Tyres and wheels. Rim profiles and dimensions.Motorcycle rims. Specification for codedesignated series (diameter codes 4 to 12) rims
AUE/4
BS AU 206-2:1986(ISO 7639:1985)Diagnostic systems for road vehicles.Specification for graphical symbols fordiagnostic testers
AUE/16
BS AU 233:1989(ISO 9458:1988)Specification for starter motor electricalconnections for passenger cars
AUE/16
DD ISO/TS 16610-20:2006Geometrical product specifications (GPS).Filtration. Linear profile filters. Basic concepts
TDW/4
DD ISO/TS 16610-22:2006Geometrical product specifications (GPS).Filtration. Linear profile filters. Spline filters
TDW/4
DD ISO/TS 16610-29:2006Geometrical product specifications (GPS).Filtration. Linear profile filters. Spline wavelets
TDW/4
DD ISO/TS 16610-40:2006Geometrical product specifications (GPS).Filtration. Morphological profile filters. Basicconcepts
TDW/4
DD ISO/TS 16610-41:2006Geometrical product specifications (GPS).Filtration. Morphological profile filters. Diskand horizontal line-segment filters
TDW/4
DD ISO/TS 16610-49:2006Geometrical product specifications (GPS).Filtration. Morphological profile filters. Scalespace techniques
TDW/4
BS ISO 16750-3:2007Road vehicles. Environmental conditions andtesting for electrical and electronic equipment.Mechanical loads
AUE/16
BS ISO 16792:2006Technical product documentation. Digitalproduct definition data practices
TDW/4
BS ISO 19072-1:2007Road vehicles. Connection interface forpyrotechnic devices, two-way and three-wayconnections. Pocket interface definition
AUE/16
BS ISO 19072-2:2007Road vehicles. Connection interface forpyrotechnic devices, two-way and three-wayconnections. Test methods and generalperformance requirements
AUE/16
BS ISO 20282-1:2006Ease of operation of everyday products. Designrequirements for context of use and usercharacteristics
PH/9
BS ISO 21849:2006Aircraft and space. Industrial data. Productidentification and traceability
ACE/1
BS ISO 11564:1998Stationary source emissions. Determination ofthe mass concentration of nitrogen oxides.Naphthylethylenediamine photometric method
EH/2/1
BS ISO 11632:1998Stationary source emissions. Determination ofmass concentration of sulfur dioxide. Ionchromatography method
EH/2/1
BS ISO 11898-5:2007Road vehicles. Controller area network (CAN).High-speed medium access unit with low-powermode
AUE/16
BS ISO 13041-5:2006Test conditions for numerically controlledturning machines and turning centres. Accuracyof feeds, speeds and interpolations
MTE/1
BS ISO 13322-2:2006Particle size analysis. Image analysis methods.Dynamic image analysis methods
LBI/37
BS ISO 13542:2006Paper and board. Specification for internaldiameters of cores for reels
PAI/11
BS ISO 13985:2006Liquid hydrogen. Land vehicle fuel tanks
PVE/3/8
BS ISO/IEC TR 14759:1999Software engineering. Mock up and prototype.A categorization of software mock up andprototype models and their use
IST/15
BS ISO 15553:2006Water quality. Isolation and identification ofCryptosporidium oocysts and Giardia cysts fromwater
EH/3/4
BS ISO 15901-2:2006Pore size distribution and porosity of solidmaterials by mercury porosimetry and gasadsorption. Analysis of mesopores andmacropores by gas adsorption
LBI/37
BS ISO 16212:2008Cosmetics. Microbiology. Enumeration of yeastand mould
CW/217
DD ISO/TS 16610-1:2006Geometrical product specifications (GPS).Filtration. Overview and basic concepts
TDW/4
British Standards Under Review continued...
38 Update Standards Jan 2010Prices may be subject to change.
BS EN 13282-3Hydraulic road binder. Conformity evaluation
will supersede DD ENV 13282:2000
B/516/14
BS EN 13624 (Revision)Chemical disinfectants and antiseptics.Quantitative suspension test for the evaluationof fungicidal activity of chemical disinfectantsfor instruments used in the medical area. Testmethod and requirements (phase 2, step 1)
will supersede BS EN 13624:2003
CH/216
PD CEN/TR 13910Packaging. Report on criteria andmethodologies for life cycle analysis ofpackaging
PKW/0/-/1
BS EN 14143 (Revision)Respiratory equipment. Self-contained re-breathing diving apparatus
will supersede BS EN 14143:2003
PH/4/7
BS EN 14362-1 (Revision)Textiles. Methods for the determination ofcertain aromatic amines derived from azocolorants. Detection of the use of certain azocolorants accessible without extraction
will supersede BS EN 14362-1:2003
TCI/80
BS EN 14778-1 (Revision)Solid biofuels. Methods for sampling
will supersede DD CEN/TS 14778-1:2005
PTI/17
BS EN 14780 (Revision)Solid biofuels. Methods for sample preparation
will supersede DD CEN/TS 14780:2005
PTI/17
BS EN 14974:2006/Amendment 1Facilities for users of roller sports equipment.Safety requirements and test methods
SW/136
PD CEN/TR 15404 (Revision)Solid recovered fuels. Methods for thedetermination of ash melting behaviour byusing characteristic temperatures
will supersede DD CEN/TS 15404:2006
PTI/17
DD CEN/TS 15405 (Revision)Solid recovered fuels. Methods for thedetermination of the density of pellets andbriquettes
will supersede DD CEN/TS 15405:2006
PTI/17
DD CEN/TS 15406 (Revision)Solid recovered fuels. Methods for thedetermination of bridging properties of bulkmaterial
will supersede DD CEN/TS 15406:2006
PTI/17
BS EN 30-1-3 (Revision)Domestic cooking appliances burning gas.Safety. Appliances having a glass ceramichotplate
will supersede BS EN 30-1-3:2003
GSE/35
BS EN 30-1-4 (Revision)Domestic cooking appliances burning gas.Safety. Appliances having one or more burnerswith an automatic burner control system
will supersede BS EN 30-1-4:2002
GSE/35
BS EN 545 (Revision)Ductile iron pipes, fittings, accessories and theirjoints for water pipelines. Requirements andtest methods
will supersede BS EN 545:2006
PSE/10
BS EN ISO 734-2 (Revision)Oilseed meals. Determination of oil content.Rapid extraction method
will supersede BS EN ISO 734-2:2008
AW/307
BS EN 1254-6Copper and copper alloys. Plumbing fittings.Fittings with push-fit ends
NFE/34/3
BS EN 1254-8Copper and copper alloys. Plumbing fittings.Fittings with press ends for multilayer pipes
NFE/34/3
BS EN ISO 3377-1 (Revision)Leather. Physical and mechanical tests.Determination of tear load. Single edge tear
will supersede BS EN ISO 3377-1:2002
TCI/69
BS EN ISO 3960 (Revision)Animal and vegetable fats and oils.Determination of peroxide value. Iodometric(visual) endpoint determination
will supersede BS EN ISO 3960:2008
AW/307
BS EN ISO 5912 (Revision)Camping tents
will supersede BS EN ISO 5912:2005
TCI/74
BS EN 12620 (Revision)Aggregates for concrete
will supersede BS EN 12620:2002+A1:2008
B/502
BS EN 13041 (Revision)Soil improvers and growing media.Determination of physical properties. Dry bulkdensity, air volume, water volume, shrinkagevalue and total pore space
will supersede BS EN 13041:2000
AW/20
NEW WORK STARTED
The reference number of the committeeresponsible for each item of new workstarted is given after each entry.
Where a work item has the temporarydesignation “BS EN XXXX”, it has not yetbeen allocated a standard number by theEuropean standards body.
BS 434-1 (Revision)Bitumen road emulsions (anionic and cationic).Specification for bitumen road emulsions
will supersede BS 434-1:1984
B/510/19
BS 1134 (Revision)Assessment of surface texture. Guidance formethods and instrumentation and generalguidance
will supersede BS 1134-1:1988 and BS 1134-2:1990
TDW/4
BS 2634-1 (Revision)Roughness comparison specimens. Specificationfor turned, ground, bored, milled, shaped andplaned specimens
will supersede BS 2634-1:1987
TDW/4
BS 2634-2 (Revision)Roughness comparison specimens. Specificationfor spark-eroded, shot-blasted, grit-blasted, andpolished specimens
will supersede BS 2634-2:1987
TDW/4
BS 5837 (Revision)Trees in relation to construction.Recommendations
will supersede BS 5837:2005
B/213
BS 6180 (Revision)Barriers in and about buildings. Code ofpractice
will supersede BS 6180:1999
B/208
BS 8417 (Revision)Preservation of timber. Recommendations
will supersede BS 8417:2003
B/515
BS 8536Sustainable facility management briefing
FMW/1
BS EN 30-1-2 (Revision)Domestic cooking appliances burning gas.Safety. Appliances having forced-convectionovens and/or grills
will supersede BS EN 30-1-2:1999
GSE/35
Update Standards Jan 2010 Prices may be subject to change. 39
BS EN 61124 (Revision)Reliability testing. Compliance tests for constantfailure rate and constant failure intensity
will supersede BS EN 61124:2006
DS/1
BS EN 61300-2-10 (Revision)Fibre optic interconnecting devices and passivecomponents. Basic test and measurementprocedures. Tests. Crush resistance
will supersede BS EN 61300-2-10:1997
GEL/86/2
BS EN 61850-4 (Revision)Communication networks and systems insubstations. System and project management
will supersede BS EN 61850-4:2002
PEL/57
BS EN 61850-7-410 (Revision)Communication networks and systems forpower utility automation. Hydroelectric powerplants. Communication for monitoring andcontrol
will supersede BS EN 61850-7-410:2007
PEL/57
BS EN 61987-11Industrial-process measurement and control.Data structures and elements in processequipment catalogues. List of Properties (LOP)of measuring equipment for electronic dataexchange. Generic structures
AMT/7
BS EN 61988-4-2Plasma display panels. Panel strength measuringmethods
EPL/47
BS EN 62271-4High-voltage switchgear and controlgear. Useand handling of sulphur hexafluoride (SF6)
PEL/17/1
BS EN 62287-1 (Revision)Maritime navigation and radiocommunicationequipment and systems. Class B shipborneequipment of the automatic identificationsystem (AIS). Carrier-sense time division multipleaccess (CSTDMA) techniques
will supersede BS EN 62287-1:2006
EPL/80
BS EN 62341-5-2Organic Light Emitting Diode (OLED) displays.Mechanical endurance test methods
EPL/47
BS EN 62343Dynamic modules and devices. General andguidance
GEL/86/3
BS EN 62629Measuring methods for 3D displays
EPL/47
BS EN 16058Influence of metallic materials on waterintended for human consumption. Dynamic rigtest for assessment of nickel release fromnickel-chrome or nickel plated products
EH/6
BS EN ISO 19101 (Revision)Geographic information. Reference model
will supersede BS EN ISO 19101:2005
IST/36
BS EN ISO 27107 (Revision)Animal and vegetable fats and oils.Determination of peroxide value.Potentiometric end-point determination
will supersede BS EN ISO 27107:2008
AW/307
BS EN 60061-1:1997/Amendment 45Specification for lamp caps and holderstogether with gauges for the control ofinterchangeability and safety. Lamps caps
CPL/34/2
BS EN 60061-2:1997/Amendment 42Specification for lamp caps and holderstogether with gauges for the control ofinterchangeability and safety. Lampholders
CPL/34/2
BS EN 60061-3:1997/Amendment 43Lamps caps and holders together with gaugesfor the control of interchangeability and safety.Gauges
CPL/34/2
BS EN 60296 (Revision)Fluids for electrotechnical applications. Unusedmineral insulating oils for transformers andswitchgear
will supersede BS EN 60296:2004
GEL/10
BS EN 60350 (Revision)Electric cooking ranges, hobs, ovens and grillsfor household use. Methods for measuringperformance
will supersede BS EN 50304:2009,BS EN 60350:2009
CPL/59
BS EN 60475Method of sampling liquid dielectrics
GEL/10
BS EN 60567 (Revision)Oil-filled electrical equipment. Sampling ofgases and of oil for analysis of free anddissolved gases. Guidance
will supersede BS EN 60567:2005
GEL/10
BS EN 60704-2-14Household and similar electrical appliances. Testcode for the determination of airborneacoustical noise. Particular requirements forrefrigerators, frozen-food storage cabinets andfood freezers
CPL/59/13
BS EN 15410 (Revision)Solid recovered fuels. Method for thedetermination of the content of major elements(Al, Ca, Fe, K, Mg, Na, P, Si, Ti)
will supersede DD CEN/TS 15410:2006
PTI/17
BS EN 15411 (Revision)Solid recovered fuels. Methods for thedetermination of the content of trace elements(As, Ba, Be, Cd, Co, Cr, Cu, Hg, Mo, Mn, Ni, Pb,Sb, Se, Tl, V and Zn)
will supersede DD CEN/TS 15411:2006
PTI/17
BS EN 15413 (Revision)Solid recovered fuels. Methods for thepreparation of the test sample from thelaboratory sample
will supersede DD CEN/TS 15413:2006
PTI/17
DD CEN/TS 15480-3Identification card systems. European CitizenCard. European Citizen Card Interoperabilityusing an application interface
IST/17
DD CEN/TS 15639 (Revision)Solid recovered fuels. Methods for thedetermination of mechanical durability ofpellets
will supersede DD CEN/TS 15639:2007
PTI/17
BS EN 16051-1Inflation devices and accessories for inflatableconsumer products. Compatibility of valves andvalve adapters
SW/136
BS EN 16051-2Inflation devices and accessories for inflatableconsumer products. Safety requirements,durability, performance, compatibility and testmethods of inflators
SW/136
BS EN 16054BMX bicycles. Safety requirements and testmethods
GME/25
BS EN 16055Leather. Raw cattle hides and calf skins.Description, presentation, preservation
TCI/69
BS EN 16056Influence of metallic materials on waterintended for human consumption. Method toevaluate the passivity of stainless steel
EH/6
BS EN 16057Influence of metallic materials on waterintended for human consumption. Method todetermine the amount of lead on the surface ofcopper alloys
EH/6
New Work Started continued...
40 Update Standards Jan 2010Prices may be subject to change.
PD ISO/TR 7074Performance requirements for plastics pipes andfittings for use in underground drainage andsewage
PRI/88/1
BS ISO 7752-2Lifting appliances. Controls. Layout andcharacteristics. Basic arrangement andrequirements for mobile cranes
MHE/3/5
BS ISO 8013 (Revision)Rubber, vulcanized. Determination of creep incompression or shear
will supersede BS ISO 8013:2006
PRI/22
BS ISO 8332 (Revision)Rubber compounding ingredients. Sulfur.Methods of test
will supersede BS ISO 8332:2006
PRI/23
BS ISO 8784-2Pulp, paper and board. Microbiologicalexamination. Surface method for enumerationof yeasts and molds
PAI/11
BS ISO 9772 (Revision)Cellular plastics. Determination of horizontalburning characteristics of small specimenssubjected to a small flame
will supersede BS ISO 9772:2001
PRI/26
BS ISO 9773 (Revision)Plastics. Determination of burning behaviour ofthin flexible vertical specimens in contact with asmall-flame ignition source
will supersede BS EN ISO 9773:1999
PRI/26
BS ISO 10303-239Industrial automation systems and integration.Product data representation and exchange.Application protocol. Product lifecycle support
AMT/4
BS ISO 10360-8Geometrical Product Specifications (GPS).Acceptance and reverification tests forcoordinate measuring machines (CMM). CMMswith optical distance sensors
TDW/4
BS ISO 10360-9Geometrical Product Specifications (GPS).Acceptance and reverification tests forcoordinate measuring machines (CMM). CMMswith multiple probing systems
TDW/4
BS ISO 10502Aerospace. Hose assemblies inpolytetrafluoroethylene (PTFE) for use up to232ºC and 10500 kPa. Procurement specification
ACE/69
BS ISO 2782-2Rubber, vulcanized or thermoplastic.Determination of permeability to gases. Carriergas method
PRI/22
BS ISO 2951Vulcanized rubber. Determination of insulationresistance
PRI/22
BS ISO 3387Rubber. Determination of crystallization effectsby hardness measurements
will supersede BS 903-A63:1995
PRI/22
BS ISO 4652Rubber compounding ingredients. Carbonblack. Determination of specific surface area bynitrogen adsorption methods. Single-pointprocedures
will partially supersede BS 5293-11:1995
PRI/23
BS ISO 4658 (Revision)Acrylonitrile-butadiene rubber (NBR).Evaluation procedure
will supersede BS ISO 4658:1999
PRI/23
BS ISO 5636-3Paper and board. Determination of airpermeance (medium range). Bendtsen method
will supersede BS 6538-2:1992
PAI/11
BS ISO 5660-3Reaction-to-fire tests. Heat release, smokeproduction and mass loss rate. Guidance onmeasurement
FSH/21/5
BS ISO 5660-5Reaction-to-fire tests. Heat release, smokeproduction and mass loss rate. Heat release(cone calorimeter method) and smokeproduction rate (dynamic measurement)
FSH/21
BS ISO 6341 (Revision)Water quality. Determination of the inhibitionof the mobility of Daphnia magna Straus(Cladocera, Crustacea). Acute toxicity test
will supersede BS EN ISO 6341:1996
EH/3/5
BS ISO 6533 (Revision)Forestry machinery. Portable chain-saw fronthand-guard. Dimensions and clearances
will supersede BS ISO 6533:2001
AGE/29
BS ISO 6808 (Revision)Plastics hoses and hose assemblies for suctionand low-pressure discharge of petroleumliquids. Specification
will supersede BS EN ISO 6808:2001
PRI/66
BS EN 62642-2-2Alarm systems. Intrusion and hold-up systems.Intrusion detectors. Passive infra red detectors
GW/1
BS EN 62642-3Alarm systems. Intrusion and hold-up systems.Control and indicating equipment
GW/1
BS EN 62642-4Alarm systems. Intrusion and hold-up systems.Warning devices
GW/1
BS EN 62642-5-3Alarm systems. Intrusion and hold-up systems.Requirements for interconnections equipmentusing radio frequency techniques
GW/1
PD ISO/TR 230-8:2009/Amendment 1Test code for machine tools. Determination ofvibration levels
MTE/1/2
BS ISO 812 (Revision)Rubber, vulcanized or thermoplastic.Determination of low-temperature brittleness
will supersede BS ISO 812:2006
PRI/22
PD ISO/TR 945-2Microstructure of cast irons. Graphiteclassification by image analysis
ISE/35
BS ISO 1183-1 (Revision)Plastics. Methods for determining the density ofnon-cellular plastics. Immersion method, liquidpyknometer method and titration method
will supersede BS EN ISO 1183-1:2004
PRI/21
BS ISO 1431-1 (Revision)Rubber, vulcanized or thermoplastic. Resistanceto ozone cracking. Static and dynamic straintesting
will supersede BS ISO 1431-1:2004
PRI/22
BS ISO 1432Physical testing of rubber. Method fordetermination of stiffness at low temperature(Gehman test)
will supersede BS 903-A13:1990
PRI/22
BS ISO 2475 (Revision)Chloroprene rubber (CR). General-purposetypes. Evaluation procedure
will supersede BS ISO 2475:1999
PRI/23
BS ISO 2782-1Rubber, vulcanized or thermoplastic.Determination of permeability to gases.Manometric methods
PRI/22
Update Standards Jan 2010 Prices may be subject to change. 41
BS ISO 13742Ships and marine technology. Ship’s mooringand towing fittings. Universal fairleads withoutupper roller
SME/32/-/4
BS ISO 13755Ships and marine technology. Ship’s mooringand towing fittings. Steel rollers
SME/32/-/4
BS ISO 13767Ships and marine technology. Ship’s mooringand towing fittings. Shipside roller fairleads
SME/32/-/4
BS ISO 13776Ships and marine technology. Ship’s mooringand towing fittings. Pedestal fairleads
SME/32/-/4
BS ISO 13784-1Reaction-to-fire tests for sandwich panelbuilding systems. Test method for small rooms
FSH/21
BS ISO 13795Ships and marine technology. Ship’s mooringand towing fittings. Welded steel bollards forsea-going vessels
SME/32/-/4
BS ISO 13797Ships and marine technology. Ship’s mooringand towing fittings. Cruciform bollards
SME/32/-/4
BS ISO 13798Ships and marine technology. Ship’s mooringand towing fittings. Recessed bitts (steel platetype)
SME/32/-/4
BS ISO 13799Ships and marine technology. Ship’s mooringand towing fittings. Recessed bitts (castingtype)
SME/32/-/4
DD ISO/TS 14198Road vehicles. Ergonomic aspects of transportinformation and control systems. Calibrationtasks for methods which assess driver demanddue to the use of in-vehicle systems
AUE/12
BS ISO 14230-1Road vehicles. Diagnostic systems. Keywordprotocol 2000. Physical layer
AUE/16
BS ISO 14230-2Road vehicles. Diagnostic systems. Keywordprotocol 2000. Data link layer
AUE/16
BS ISO 13209-3Road vehicles. Open test sequence exchangeformat (OTX). Standard extensions andrequirements
AUE/16
BS ISO 13400-1Road vehicles. Diagnostic communicationbetween test equipment and vehicle overinternet protocol. General information and use-case definition
AUE/16
BS ISO 13400-2Road vehicles. Diagnostic communicationbetween test equipment and vehicle overinternet protocol. Network and transport layerrequirements and services
AUE/16
BS ISO 13400-3Road vehicles. Diagnostic communicationbetween test equipment and vehicle overinternet protocol. IEEE 802.3 based wiredvehicle interface
AUE/16
BS ISO 13470Trenchless applications of ductile iron pipessystems
PSE/10
BS ISO 13482Robots and robotic devices. Safetyrequirements. Non-medical personal care robot
AMT/4
BS ISO 13507Rubber compounds. Short names for propertiesreported in certificates of analysis
PRI/10
BS ISO 13613Ships and marine technology. Critical systemsfor propulsion and manueverability.Maintenance and testing guidelines
SME/32/-/3
BS ISO 13713Ships and marine technology. Ship’s mooringand towing fittings. Mooring chocks
SME/32/-/4
BS ISO 13728Ships and marine technology. Ship’s mooringand towing fittings. Panama chocks
SME/32/-/4
BS ISO 13729Ships and marine technology. Ship’s mooringand towing fittings. Closed chocks
SME/32/-/4
BS ISO 13733Ships and marine technology. Ship’s mooringand towing fittings. Universal fairleads withupper roller
SME/32/-/4
BS ISO 10819 (Revision)Mechanical vibration and shock. Hand-armvibration. Method for the measurement andevaluation of the vibration transmissibility ofgloves at the palm of the hand
will supersede BS EN ISO 10819:1997
GME/21/6
BS ISO 10966 (Revision)Sports and recreational equipment. Fabrics forawnings and camping tents. Specification
will supersede BS ISO 10966:2005
TCI/74
BS ISO 10993-3 (Revision)Biological evaluation of medical devices. Testsfor genotoxicity, carcinogenicity andreproductive toxicity
will supersede BS EN ISO 10993-3:2009
CH/194
BS ISO 11425 (Revision)Rubber hoses and hose assemblies forautomobile power-steering systems.Specification
will supersede BS ISO 11425:1996
PRI/66
BS ISO 12122Timber structures. Timber. Evaluation ofcharacteristic values for structural timber
B/518
BS ISO/IEC 12785-2Information technology for learning, education,and training. Content packaging. XML binding
IST/43
BS ISO/IEC 12785-3Information technology for learning, education,and training. Content packaging. Best practiceand implementation guide
IST/43
BS ISO 13073-1Ships and marine technology. Risk assessmenton anti-fouling systems on ships. Marineenvironmental risk assessment method onactive substances used for anti-fouling systemson ships
SME/32/-/2
BS ISO 13088Gas cylinders. Filling conditions and fillinginspection of acetylene cylinder bundles
PVE/3/7
BS ISO 13137Workplace atmospheres. Personal samplingpumps. Requirements and test methods
EH/2/2
BS ISO 13179-1Implants for surgery. Titanium plasma sprayedcoatings. General requirements
CH/150/1
New Work Started continued...
42 Update Standards Jan 2010Prices may be subject to change.
BS ISO 18898 (Revision)Rubber. Calibration and verification of hardnesstesters
will supersede BS ISO 18898:2006
PRI/22
BS ISO 18934 (Revision)Imaging materials. Multiple media archives.Storage environment
will supersede BS ISO 18934:2006
CPW/42
BS ISO 19701 (Revision)Methods for sampling and analysis of fireeffluents
will supersede BS ISO 19701:2005
FSH/16
BS ISO 19702Toxicity testing of fire effluents. Guidance foranalysis of gases and vapours in fire effluentsusing FTIR gas analysis
FSH/16
DD ISO/TS 19713-1Road vehicles. Inlet air cleaning equipment forinternal combustion engines and compressors.Fractional efficiency testing with fine particles(0, 3 m to 5 m optical diameter)
GSE/40
DD ISO/TS 19713-2Road vehicles. Inlet air cleaning equipment forinternal combustion engines and compressors.Fractional efficiency testing with coarseparticles (5 m to 40 m optical diameter)
GSE/40
BS ISO/IEC 19788-3Information technology for learning, educationand training. Metadata for learning resources.MLR basic application profile
IST/37
BS ISO 19980 (Revision)Ophthalmic instruments. Corneal topograpers
will supersede BS EN ISO 19980:2005
CH/172/6
BS ISO 20462-3 (Revision)Photography. Psychophysical experimentalmethods for estimating image quality. Qualityruler method
will supersede BS ISO 20462-3:2005
CPW/42
BS ISO 23274-2Hybrid-electric road vehicles. Exhaust emissionsand fuel consumption measurements
GSE/40
BS ISO 25178-1Geometrical product specifications (GPS).Surface texture. Areal. Indication of surfacetexture
TDW/4
BS ISO 14451-8Pyrotechnic articles. Pyrotechnic articles forvehicles. Requirements for igniters
AUE/7
BS ISO 14451-9Pyrotechnic articles. Pyrotechnic articles forvehicles. Requirements for actuators
AUE/7
BS ISO 14451-10Pyrotechnic articles. Pyrotechnic articles forvehicles. Requirements for semi finishedassemblies
AUE/7
BS ISO 14452Network services billing
SVS/7/4
BS ISO 14477Vegetable fats and oils. Determination oftriacylglycerols. Method by high performanceliquid chromatography (HPLC)
AW/307
BS ISO 14538Road vehicles. Conditions for testing theelectrical and electronic equipments. Functionalperformance status classification (FPSC)
GSE/40
BS ISO 14934-3Fire tests. Calibration and use of heat fluxmeters. Secondary calibration method
FSH/21
BS ISO 14990-1Earth-moving machinery. Safety of electric driveand hybrid electronic components and systems.General requirements
B/513/1
PD ISO/TR 15144-1Calculation of micro-pitting load capacity ofcylindrical spur and helical gears. Introductionand basic principles
MCE/5/-/15
BS ISO 15202-2 (Revision)Workplace air. Determination of metals andmetalloids in airborne particulate matter byinductively coupled plasma atomic emissionspectrometry. Sample preparation
will supersede BS ISO 15202-2:2001
EH/2/2
BS ISO 15494 (Revision)Plastics piping systems for industrialapplications. Polybutene (PB), polyethylene (PE)and polypropylene (PP). Specifications forcomponents and the system. Metric series
will supersede BS EN ISO 15494:2003
PRI/88/2
BS ISO 15928-5Houses. Description of performance. Energyefficiency
CB/500
BS ISO 14285Rubber and plastics gloves for the food industryand food services. Specification
CH/205/3
BS ISO 14309Rubber, vulcanized or thermoplastic. Electricalresistivity. Determination of volume and/orsurface resistivity
PRI/22
BS ISO 14371Water quality. Determination of fresh watersediment chronic toxicity to Heterocyprisincongruens (Crustacea, Ostracoda)
EH/3/5
BS ISO 14380Water quality. Determination of the acutetoxicity to Thamnocephalus platyrus (Crustacea,Anostraca) at sublethal and lethal level
EH/3/5
BS ISO 14382Workplace atmospheres. Determination oftoluene diisocyanate vapors using 1-(2-pyridyl)piperazine-coated glass fiber filters andanalysis by high performance liquidchromatography with ultraviolet andfluorescent detectors
EH/2/2
BS ISO 14451-1Pyrotechnic articles. Pyrotechnic articles forvehicles. Terminology
AUE/7
BS ISO 14451-2Pyrotechnic articles. Pyrotechnic articles forvehicles. Test methods
AUE/7
BS ISO 14451-3Pyrotechnic articles. Pyrotechnic articles forvehicles. Labelling
AUE/7
BS ISO 14451-4Pyrotechnic articles. Pyrotechnic articles forvehicles. Requirements for micro gas generators
AUE/7
BS ISO 14451-5Pyrotechnic articles. Pyrotechnic articles forvehicles. Requirements for airbag gasgenerators
AUE/7
BS ISO 14451-6Pyrotechnic articles. Pyrotechnic articles forvehicles. Requirements for airbag modules
AUE/7
BS ISO 14451-7Pyrotechnic articles. Pyrotechnic articles forvehicles. Requirements for seatbeltpretensioners
AUE/7
Update Standards Jan 2010 Prices may be subject to change. 43
09/30196573 DCBS 8530 Traditional-style half round, beadedhalf round, Victorian ogee and moulded ogeealuminium rainwater systems. Specification
B/542/6
09/30202852 DCBS 5733 General requirements for electricalaccessories. Specification
PEL/23
09/30205734 DCBS 5864 Installation and maintenance of gas-fired ducted air heaters of rated heat input notexceeding 70 kW net (2nd and 3rd familygases). Specification
GSE/30/-/7
09/30214218 DCPD 5500 AMD2 Specificartion for unfiredfusion welded pressure vessels
PVE/1
DRAFT BRITISH STANDARDSFOR PUBLIC COMMENT –ADOPTIONS
All Draft British Standards are availablefrom BSI Customer Services (see ’How toorder’ on page 2)
Most drafts are charged at£10.00 to members and£20.00 to non-members.
Larger draft documents are charged at ahigher price according to the number ofpages and are priced individually below.
Comments are welcome and should besent to Debbie Stead, Head of CommitteeService Centre – Operations, BSI HeadOffice, 389 Chiswick High Road, LondonW4 4AL by 28 February, 2010 unlessotherwise stated, to be considered by therelevant BSI committee.
Draft standards may be modified beforeadoption and issue as British Standards.
09/30100834 DCBS ISO/IEC 19788-1 Information technology.Learning, education and training. Metadata forlearning resources. Part 1. Framework
IST/43
09/30150663 DCBS ISO 22734-2 Hydrogen generators usingwater electrolysis process. Part 2. Residentialapplications
PVE/3/8
Comments for the above document are required by15 February, 2010
09/30154552 DCBS ISO 23228 Thermoplastics pipes for theconveyance of fluids. Determination of thestress-rupture resistance of pipe resin materialsusing plain strain tensile (PSGT) specimens
PRI/88/4
BS 3A 110Specification for steel nuts (Unified hexagonsand Unified threads) for shear bolts for aircraft
will supersede BS 2A 110:1962
ACE/12
BS A260 to A265Specification for metric screws
will supersede BS A 260; A 261 [...]:1976
ACE/12
BS XXXXCopper and copper alloys. Plumbing fittings.Fittings with press ends for metallic tubes
NFE/34/3
PAS XXPrint services benchmarking
PAS XXXGuidance on cell therapy
PAS XXXXGuidance on biometrics
DRAFT BRITISH STANDARDSFOR PUBLIC COMMENT –NATIONAL BRITISHSTANDARDS
You may now comment on any NationalBritish Standard online. BSI BritishStandards has launched a Draft Reviewsystem which allows access to the draftsof all National British Standards. Toenhance access of Drafts for PublicComment for the wider community, makecomments more visible and move intocollaborative working practices, you willnow be able to comment on any NationalBritish Standard by visitinghttp://www.bsigroup.com/drafts. Allyou need to do is register. This service isfree of charge.
Please note that the only standardsavailable on this service are pure BritishStandards (National Standards e.g:BS XXXX). European and internationaldocuments are not included at this time.
Deadlines for receipt of comments oneach of the individual drafts can be foundat http://www.bsigroup.com/drafts.The deadline for the following drafts is28 February, 2010 unless otherwisestated.
Should you wish to receive these drafts inhard copy format, they are available for afee from BSI Customer Services (see ’Howto order’ on page 2).
09/30170006 DCBS 6079-1 Project management. Part 1.Principles and guidelines for the managementof projects
MS/2
BS ISO/IEC 27034-2Information technology. Security techniques.Application security. Organization normativeframework
IST/33
BS ISO/IEC 27034-3Information technology. Security techniques.Application security. Application securitymanagement
IST/33
BS ISO/IEC 27034-4Information technology. Security techniques.Application security. Application securityvalidation
IST/33
BS ISO/IEC 27034-5Information technology. Security techniques.Application security. Protocols and applicationsecurity controls data structure
IST/33
BS ISO 27145-5Road vehicles. Implementation of WWH-OBDcommunication. Conformance test
AUE/16
BS ISO 27145-6Road vehicles. Implementation of WWH-OBDcommunication. External test equipment
AUE/16
BS ISO 27871Cheese and processed cheese. Determination ofnitrogen fractions
AW/5
BS ISO 28017Rubber hoses and hose assemblies, wire ortextile reinforced, for dredging applications.Specification
PRI/66
BS ISO 29904Fire chemistry. Aerosols generation andmeasurement in fire
FSH/16
PD IEC/TR 61000-1-6Electromagnetic compatibility (EMC). General.Guide to the assessment of measurementuncertainty
GEL/210/12
DD IEC/TS 62657Industrial communication networks. Wirelesscommunication network and communicationprofiles. Coexistence
AMT/7
PD 0024 (Revision)Archival documents. Guide to the interpretationof BS 5454:2000. Storage and exhibition ofarchival documents
will supersede PD 0024:2001
IDT/2/9
New Work Started continued...
44 Update Standards Jan 2010Prices may be subject to change.
09/30182882 DCBS ISO 29463-5 High-efficiency filters and filtermedia for removing particles from air. Part 5.Test method for determining the efficiency offilter elements
MCE/21
09/30185799 DCBS EN ISO 11354-1 Advanced automationtechnologies and their applications. Part 1.Framework for enterprise interoperability
AMT/5
09/30185894 DCBS EN 1344 Clay pavers. Requirements and testmethods
B/507
09/30189435 DCBS ISO 10878 Non-destructive testing. Infraredthermography. Vocabulary
WEE/46
09/30191421 DCBS EN 61169-35 Radio-frequency connectors.Part 35. Sectional specification for 2.92 seriesR.F. coaxial connectors
EPL/46/2
09/30193524 DCBS EN 62222 Fire performance ofcommunication cables installed in buildings.Update new methods of fire retardancy
EPL/46
Comments for the above document are required by5 February, 2010
09/30193710 DCBS EN 16018 Non-destructive testing.Terminology. Terms used in ultrasonic testingwith phased arrays
WEE/46
09/30194820 DCBS EN 60731 Medical electrical equipment.Dosimeters with ionization chambers as used inradiotherapy
CH/62/3
09/30195921 DCBS ISO 11057 Air quality. Test method forfiltration characterisation of cleanable filtermedia
EH/2/1
09/30196316 DCBS ISO 6361-1 Wrought aluminium andaluminium alloys. Sheets, strips and plates. Part 1. Technical conditions for inspection anddelivery
NFE/35
09/30196319 DCBS ISO 6361-2 Wrought aluminium andaluminium alloys. Sheets, strips and plates. Part 2. Mechanical properties
NFE/35
09/30180789 DCBS EN 16016-1 Non destructive testing.Radiation method. Computed tomography. Part 1. Terminology
WEE/46
09/30180795 DCBS EN 16016-2 Non destructive testing.Radiation method. Computed tomography. Part 2. Principle, equipment and samples
WEE/46
09/30180799 DCBS EN 16016-3 Non destructive testing.Radiation method. Computed tomography. Part 3. Operation and interpretation
WEE/46
09/30180804 DCBS EN 16016-4 Non destructive testing.Radiation method. Computed tomography. Part 4. Qualification
WEE/46
09/30181286 DCBS ISO IEC 24727-5 Identification cards.Integrated circuit cards programming interface.Part 5. Testing procedures£85.00 members, £170.00 non-members
IST/17
09/30182350 DCBS EN 12757-1 AMD1 Mixing machinery forcoating materials. Safety requirements. Part 1.Mixing machinery for use in vehicle refinishing
MCE/3/8
09/30182356 DCBS EN 12581 AMD1 Coating plants. Machineryfor dip coating and electrodeposition of organicliquid coating material. Safety requirements
MCE/3/8
09/30182865 DCBS ISO 29463-1 High-efficiency filters and filtermedia for removing particles from air. Part 1.Classification, performance testing and marking
MCE/21
09/30182868 DCBS ISO 29463-2 High-efficiency filters and filtermedia for removing particles from air. Part 2.Aerosol production, measuring equipment andparticle-counting statistics
MCE/21
09/30182871 DCBS ISO 29463-3 High-efficiency filters and filtermedia for removing particles from air. Part 3.Test method for flat sheet filter media
MCE/21
09/30182875 DCBS ISO 29463-4 High-efficiency filters and filtermedia for removing particles from air. Part 4.Test method for determining the leakage offilter elements (scan method)
MCE/21
09/30155614 DCBS ISO 15698-1 Steel for the reinforcement ofconcrete. Headed bars. Part 1. Requirements
ISE/9/1
09/30155621 DCBS ISO 15698-2 Steel for the reinforcement ofconcrete. Headed bars. Part 2. Test methods
ISE/9/1
09/30165649 DCBS ISO 25964-1 Information anddocumentation. Thesauri and interoperabilitywith other vocabularies. Part 1. Thesauri forinformation retrieval£18.00 members, £36.00 non-members
IDT/2/2
Comments on this draft should be submitted by 28 February, 2010 athttp://www.bsigroup.com/drafts
09/30166263 DCBS IEC 60364-5-55 AMD3 Low-voltageelectrical installations. Part 5-55. Selection anderection of electrical equipment. Otherequipment
JPEL/64
Comments for the above document are required by31 January, 2010
09/30168805 DCBS EN ISO 3107 Dentistry. Zinc oxide/eugenolcements and zinc oxide/noneugenol cements
CH/106/1
09/30170207 DCBS ISO/IEC 24787 Information technology.Identification cards. On-card biometriccomparison
IST/17
09/30170496 DCBS EN 60601-2-45 Medical electricalequipment. Part 2-45. Particular requirementsfor basic safety and essential performance ofmammographic X-ray equipment andmammographic stereotactic devices
CH/62/2
09/30173981 DCBS EN 60662 High-pressure sodium vapourlamps. Performance specifications£18.00 members, £36.00 non-members
CPL/34/1
09/30179632 DCBS EN ISO 12312-1 Eye and face protection.Sunglasses and related eyewear. Part 1.Sunglasses for general use
PH/2
Comments for the above document are required by12 February, 2010
09/30180290 DCBS EN 1247 AMD1 Foundry machinery. Safetyrequirements for ladles, pouring equipment,centrifugal casting machines, continuous andsemi continuous casting machines
MCE/3/10
Update Standards Jan 2010 Prices may be subject to change. 45
09/30203792 DCBS ISO 7010 Graphical symbols. Safety coloursand safety signs. Registered safety signs£18.00 members, £36.00 non-members
PH/8/1
09/30203860 DCBS EN 14139 Ophthalmic optics. Specificationsfor ready-to-wear spectacles
CH/172/3
09/30204392 DCBS ISO 12958 Geotextiles and geotextile-related products. Determination of water flowcapacity in their plane
B/553
Comments for the above document are required by22 January, 2010
09/30204691 DCBS ISO/IEC 26512 Software and systemsengineering. Requirements for acquirers andsuppliers of user documentation
IST/15
Comments for the above document are required by1 February, 2010
09/30204817 DCBS EN 1888 Child care articles. Wheeled childconveyances. Safety requirements and testmethods
CW/1/2
09/30204931 DCBS ISO/IEC 24800-2 Information technology.JPSearch. Part 2. Registration, identification andmanagement of schema and ontology
IST/37
09/30205279 DCBS ISO/IEC 29199-3 Information technology.JPEG XR image coding system. Part 3. MotionJPEG XR
IST/37
09/30206295 DCBS EN 16010 Plastics. Recycled plastics.Sampling procedures for testing plastics wasteand recyclates
PRI/89
09/30206298 DCBS EN 16011 Plastics. Recycled plastics. Samplepreparation
PRI/89
09/30207703 DCBS ISO/IEC 10918-5 Information technology.Digital compression and coding of continuous-tone still images. JPEG File Interchange Format(JFIF)
IST/37
09/30207815 DCBS EN 15599-1 Thermal insulation products forbuilding equipment and industrial installations.In-situ thermal insulation formed fromexpanded perlite (EP) products. Part 1.Specification for bonded and loose-fill productsbefore installation
PRI/72
09/30197681 DCBS ISO 10159 Health informatics. Messages andcommunication. Web access reference manifest
IST/35
09/30201352 DCBS ISO 7626-1 Vibration and shock.Experimental determination of mechanicalmobility. Part 1. Basic definitions andtransducers
GME/21
Comments for the above document are required by15 February, 2010
09/30201367 DCBS ISO 5264-2 Pulps. Laboratory beating. Part 2. PFI mill method
PAI/11
09/30202122 DCBS ISO 12863 Standard test method formeasuring the ignition propensity of cigarettes
FSH/21
09/30202130 DCBS ISO 13059 Round timber. Requirements forthe measurement of dimensions and methodsfor the determination of volume
B/543
09/30202602 DCBS EN 50134-3 Alarm systems. Social alarmsystems. Part 3. Local unit and controller
GW/1/12
Comments for the above document are required by19 March, 2010
09/30202766 DCBS ISO/IEC 24791-2 Information technology.Radio Frequency Identification (RFID) for itemmanagement. Software system infrastructure.Part 2. Data management
IST/34
09/30202768 DCBS ISO/IEC 24791-3 Information technology.Radio Frequency Identification (RFID) for itemmanagement. Software system infrastructure.Part 3. Device management
IST/34
09/30203242 DCBS ISO 7380-1 Hexagon socket button headscrews. Part 1. Button head (head shape A)
FME/9/3
09/30203245 DCBS ISO 7380-2 Hexagon socket button headscrews. Part 2. Button head with collar (headshape B)
FME/9/3
09/30203413 DCBS ISO/IEC 23000-11 AMD1 Informationtechnology. Multimedia application format(MPEG-A). Part 11. Stereoscopic videoapplication format
IST/37
Comments for the above document are required by19 March, 2010
09/30196322 DCBS ISO 6361-3 Wrought aluminium andaluminium alloys. Sheets, strips and plates. Part 3. Strips. Tolerances on shape anddimensions
NFE/35
09/30196325 DCBS ISO 6361-4 Wrought aluminium andaluminium alloys. Sheets, strips and plates. Part 4. Sheets and plates. Tolerances on shapeand dimensions
NFE/35
09/30196463 DCBS EN 61169-14 Radio-frequency connectors.Part 14. R.F. coaxial connectors with innerdiameter of outer conductor 12 mm with screwcoupling. Characteristic impedance 75 ohms(Type 3. 5/12)
EPL/46/2
09/30196808 DCBS ISO 11806-1 Agricultural and forestrymachinery. Safety requirements and testing forportable, hand-held, powered brush-cutters andgrass-trimmers. Part 1. Machines with integralcombustion engine
AGE/29
09/30196811 DCBS ISO 11680-1 Machinery for forestry. Safetyrequirements and testing for pole-mountedpowered pruners. Part 1. Machines fitted withan integral combustion engine
AGE/29
09/30196814 DCBS ISO 11680-2 Machinery for forestry. Safetyrequirements and testing for pole-mountedpowered pruners. Part 2. Machines for use withback-pack power source
AGE/29
09/30197343 DCBS ISO 4126-1 Safety devices for protectionagainst excessive pressure. Part 1. Safety valves
PSE/18/6
Comments for the above document are required by15 February, 2010
09/30197346 DCBS ISO 4126-4 Safety devices for protectionagainst excessive pressure. Part 4. Pilot-operated safety valves
PSE/18/6
Comments for the above document are required by15 February, 2010
09/30197353 DCBS ISO 4126-7 Safety devices for protectionagainst excessive pressure. Part 7. Common data
PSE/18/6
Comments for the above document are required by15 February, 2010
09/30197477 DCBS ISO 11287 Green tea. Definition and basicrequirements
AW/8
Comments for the above document are required by16 March, 2010
Draft British Standards for Public Comment continued...
46 Update Standards Jan 2010Prices may be subject to change.
09/30209043 DCBS EN 13922 Tanks for transport of dangerousgoods. Service equipment for tanks. Overfillprevention systems for liquid fuels
AUE/18
Comments for the above document are required by8 March, 2010
09/30209158 DCBS EN ISO 14245 Gas cylinders. Specificationsand testing of LPG cylinder valves. Self-closing
PVE/19
09/30209161 DCBS EN ISO 15995 Gas cylinders. Specificationsand testing of LPG cylinder valves. Manuallyoperated
PVE/19
09/30209360 DCBS EN 16014 Hardware for furniture. Strengthand durability of locking mechanism
FW/0/2
Comments for the above document are required by12 March, 2010
09/30209374 DCBS EN 15969-2 Tanks for transport ofdangerous goods. Digital interface for the datatransfer between tank vehicle and withstationary facilities. Part 2. Commercial andlogistic data
AUE/18
Comments for the above document are required by15 March, 2010
09/30209443 DCBS EN 15876-2 Electronic fee collection.Conformity evaluation of on-board unit androadside equipment to EN 15509. Part 2.Abstract test suite
EPL/278
09/30209524 DCBS EN 16019 Railway applications. Automaticcoupler. Performance requirements, specificinterface geometry and test method
RAE/1/-/13
09/30209615 DCBS ISO 5149-1 Refrigerating systems and heatpumps. Safety and environmental requirements.Part 1. Definitions, classification and selectioncriteria
RHE/18
09/30209618 DCBS ISO 5149-2 Refrigerating systems and heatpumps. Safety and environmental requirements.Part 2. Design, construction, testing, markingand documentation
RHE/18
09/30209621 DCBS ISO 5149-3 Refrigerating systems and heatpumps. Safety and environmental requirements.Part 3. Installation site
RHE/18
09/30208245 DCBS ISO 7051 Cross recessed raised countersunk(oval) head tapping screws
FME/9/3
09/30208248 DCBS ISO 7053 Hexagon washer head tappingscrews
FME/9/3
09/30208460 DCBS EN 15727 Ventilation for buildings. Ductsand ductwork components, leakageclassification and testing
RHE/2
Comments for the above document are required by1 March, 2010
09/30208473 DCBS EN 843-7 Advanced technical ceramics.Mechanical properties of monolithic ceramics atroom temperature. Part 7. C-ring tests
RPI/13
09/30208476 DCBS EN 843-8 Advanced technical ceramics.Mechanical properties of monolithic ceramics atroom temperature. Part 8. Guidelines forconducting proof tests
RPI/13
09/30208500 DCBS EN 58 Bitumen and bituminous binder.Sampling bituminous binders
PTI/13
09/30208703 DCBS ISO 22262-1 Air quality. Bulk materials. Part 1. Sampling and qualitative determinationof asbestos in commercial bulk materials
EH/2/3
09/30208725 DCBS EN 13037 Soil improvers and growingmedia. Determination of pH
AW/20
Comments for the above document are required by15 February, 2010
09/30208728 DCBS EN 13038 Soil improvers and growingmedia. Determination of electrical conductivity
AW/20
Comments for the above document are required by15 February, 2010
09/30208731 DCBS EN 13039 Soil improvers and growingmedia. Determination of organic content andash
AW/20
Comments for the above document are required by15 February, 2010
09/30208807 DC BS EN 13803-1 Railway applications. Track.Track alignment design parameters. Trackgauges 1435 mm and wider. Part 1. Plain line
RAE/2
09/30207822 DCBS EN 15600-1 Thermal insulation products forbuilding equipment and industrial installations.In-situ thermal insulation formed fromexfoliated vermiculite (EV) products. Part 1.Specification for bonded and loose-fill productsbefore installation
PRI/72
09/30207859 DCBS EN 16002 Flexible sheets for waterproofing.Determination of the resistance to wind load ofmechanically fastened flexible sheets for roofwaterproofing
B/546
Comments for the above document are required by30 January, 2010
09/30207865 DCBS EN 13859-1 Flexible sheets forwaterproofing. Definitions and characteristicsof underlays. Part 1. Underlays fordiscontinuous roofing
B/546/5
09/30207868 DCBS EN 13859-2 Flexible sheets forwaterproofing. Definitions and characteristicsof underlays. Part 2. Underlays for walls
B/546/5
09/30208217 DCBS ISO 1207 Slotted cheese head screws.Product grade A
FME/9/3
09/30208224 DCBS ISO 1481 Slotted pan head tapping screws
FME/9/3
09/30208227 DCBS ISO 1482 Slotted countersunk (flat) headtapping screws
FME/9/3
09/30208230 DCBS ISO 1483 Slotted raised countersunk (oval)head tapping screws
FME/9/3
09/30208233 DCBS ISO 2702 Heat-treated steel tapping screws.Mechanical properties
FME/9/3
09/30208236 DCBS ISO 4766 Slotted set screws with flat point
FME/9/3
09/30208239 DCBS ISO 7049 Cross recessed pan head tappingscrews
FME/9/3
09/30208242 DCBS ISO 7050 Cross recessed countersunk (flat)head tapping screws
FME/9/3
Update Standards Jan 2010 Prices may be subject to change. 47
09/30212950 DCBS EN 62271-100 AMD1 High-voltageswitchgear and controlgear. Part 100.Alternating current circuit-breakers
PEL/14
Comments for the above document are required by22 January, 2010
09/30212954 DCBS EN 61951-1 Secondary cells and batteriescontaining alkaline or other non-acidelectrolytes. Portable sealed rechargeable singlecells. Part 1. Nickel-cadmium
PEL/21/1
Comments for the above document are required by22 January, 2010
09/30213143 DCBS ISO/IEC 14496-1 AMD1 Informationtechnology. Coding of audio-visual objects. Part1. Systems
IST/37
Comments for the above document are required by19 March, 2010
09/30213156 DCBS EN 62496-2-2 Optical circuit boards. Testand measurement procedures. Part 2-2.Measurements. Dimensions of optical circuitboards
GEL/86
09/30213269 DCBS EN 62271-4 High-voltage switchgear andcontrolgear. Part 4. Use and handling of sulphurhexafluoride (SF6)
PEL/17/1
Comments for the above document are required by29 January, 2010
09/30213280 DCBS ISO/IEC 7816-1 Identification cards.Integrated cards. Cards with contacts. Part 1.Physical characteristics
IST/17
Comments for the above document are required by8 February, 2010
09/30213528 DCBS EN 60296 Fluids for electrotechnicalapplications. Unused mineral insulating oils fortransformers and switchgear
GEL/10
Comments for the above document are required by8 February, 2010
09/30213532 DCBS EN 60475 Method of sampling liquiddielectrics
GEL/10
Comments for the above document are required by8 February, 2010
09/30213551 DCBS EN 60567 Oil-filled electrical equipment.Sampling of gases and of oil for analysis of freeand dissolved gases. Guidance
GEL/10
Comments for the above document are required by8 February, 2010
09/30212622 DCBS EN 3682-002 Aerospace series. Connectors,plug and receptacle, electrical, rectangular,interchangeable insert type, rack to panel,operating temperature 150ºC continuous. Part 002. Specification of performance andcontact arrangements
ACE/6
Comments for the above document are required by5 February, 2010
09/30212624 DCBS EN 50550 Power frequency overvoltageprotective device for household and similarapplications (POP)
PEL/23/1
09/30212627 DCBS EN 3682-003 Aerospace series. Connectors,plug and receptacle, electrical, rectangular,interchangeable insert type, rack to panel,operating temperature 150ºC continuous. Part 003. Inserts. Product standard
ACE/6
Comments for the above document are required by5 February, 2010
09/30212628 DCBS EN 3682-004 Aerospace series. Connectors,plug and receptacle, electrical, rectangular,interchangeable insert type, rack to panel,operating temperature 150ºC continuous. Part 004. Size 2 receptacle. Product standard
ACE/6
Comments for the above document are required by5 February, 2010
09/30212729 DCBS EN 62464-2 Medical electrical equipment.Magnetic resonance equipment for medicalimaging. Part 2. Classification criteria for pulsesequences
CH/62/2
09/30212865 DCBS ISO 5149-4 Refrigerating systems and heatpumps. Safety and environmental requirements.Part 4. Operation, maintenance, repair andrecovery
RHE/18
09/30212929 DCBS EN 61850-4 Communication networks andsystems for power utility automation. Part 4.System and project management
PEL/57
09/30212942 DCBS EN 60076-18 Power transformers. Part 18.Measurement of frequency response
PEL/14
Comments for the above document are required by22 January, 2010
09/30212946 DCBS EN 61300-2-10 Fibre optic interconnectingdevices and passive component. Basic test andmeasurement procedures. Part 2-10. Tests. Crushresistance
GEL/86/2
Comments for the above document are required by31 January, 2010
09/30209756 DCBS EN 13710 European Ordering Rules.Ordering of characters from Latin, Greek,Cyrillic, Georgian and Armenian scripts
ICT/-/1
09/30210061 DCBS EN 13445-5 AMD2 Unfired pressure vessels.Part 5. Inspection and testing
PVE/1
09/30210215 DCBS EN 13445-5 AMD1 Unfired pressure vessels.Part 5. Inspection and testing
PVE/1
09/30210236 DCBS EN 1816 Resilient floor coverings.Specification for homogeneous andheterogeneous smooth rubber floor coveringswith foam backing
PRI/3/60
09/30210239 DCBS EN 1817 Resilient floor coverings.Specification for homogeneous andheterogeneous smooth rubber floor coverings
PRI/3/60
09/30210242 DCBS EN 13647 Wood flooring and woodpanelling and cladding. Determination ofgeometrical characteristics
B/543
09/30210245 DCBS EN 13228 Wood flooring. Solid woodoverlay flooring elements including blocks withan interlocking system
B/543
09/30212268 DCBS ISO 8625-4 Aerospace fluid systems.Vocabulary. Part 4. Control/actuation systems
ACE/69
09/30212527 DCBS EN 61850-7-410 Communication networksand systems for power utility automation. Part7-410. Hydroelectric power plants.Communication for monitoring and control
PEL/57
Comments for the above document are required by15 January, 2010
09/30212538 DCBS EN 60335-2-53 Household and similarelectrical appliances. Safety. Part 2-53. Particularrequirements for sauna heating appliances andinfrared cabins
CPL/61/07
09/30212621 DCBS EN 3682-001 Aerospace series. Connectors,plug and receptacle, electrical, rectangular,interchangeable insert type, rack to panel,operating temperature 150ºC continuous. Part 001. Technical specification
ACE/6
Comments for the above document are required by5 February, 2010
Draft British Standards for Public Comment continued...
48 Update Standards Jan 2010Prices may be subject to change.
prEN 2434-004Aerospace series. Paints and varnishes. Twocomponent cold curing polyurethane finish.High flexibility
The above has been issued at CEN Formal Votestage. Copies of the draft are available onrequest from the contact point (below).Contact: Committee Service CentreEmail: [email protected]
ACE/65/-/3
prEN 4662Aerospace series. Test specification for vibrationcontrol components
The above has been issued at CEN Formal Votestage. Copies of the draft are available onrequest from the contact point (below).Contact: Committee Service CentreEmail: [email protected]
ACE/12
prEN 4800-001Aerospace series. Titanium and titanium alloys.Technical specification. Plate, sheet and strip
The above has been issued at CEN Formal Votestage. Copies of the draft are available onrequest from the contact point (below).Contact: Committee Service CentreEmail: [email protected]
ACE/61/-/49
prEN 60335-2-91Household and similar electrical appliances.Safety. Particular requirements for walk-behindand hand-held lawn trimmers and lawn edgetrimmers
The above draft has been issued under theCENELEC UAP. Copies can be obtained from the Programme Manager (below). Anycomments should be submitted no later than28 February, 2010.Contact: Bob StrattonEmail: [email protected]
CPL/61/23
CEN/CENELEC UNIQUEACCEPTANCE PROCEDURE
Comments can be sent by email or bypost to named contacts at:–BSI Head Office389 Chiswick High RoadLondon W4 4ALTel: 020 8996 9000
prEN ISO 2171(ISO 2171:2007)Cereals, pulses and by-products. Determinationof ash yield by incineration
prEN ISO 5529(ISO 5529:2007)Wheat. Determination of the sedimentationindex. Zeleny test
prEN 2240-035Aerospace series. Lamps, incandescent. Lamp,code 387. Product standard
prEN 2240-036Aerospace series. Lamps, incandescent. Lamp,code 388. Product standard
prEN 2240-037Aerospace series. Lamps, incandescent. Lamp,code 394. Product standard
prEN 2240-038Aerospace series. Lamps, incandescent. Lamp,code 401. Product standard
prEN 2240-039Aerospace series. Lamps, incandescent. Lamp,code 600. Product standard
prEN 2240-040Aerospace series. Lamps, incandescent. Lamp,code 680. Product standard
prEN 2240-041Aerospace series. Lamps, incandescent. Lamp,code 682. Product standard
prEN 2240-042Aerospace series. Lamps, incandescent. Lamp,code 683. Product standard
prEN 2240-043Aerospace series. Lamps, incandescent. Lamp,code 685. Product standard
prEN 2240-044Aerospace series. Lamps, incandescent. Lamp,code 713. Product standard
prEN 2240-045Aerospace series. Lamps, incandescent. Lamp,code 714. Product standard
prEN 2240-046Aerospace series. Lamps, incandescent. Lamp,code 715. Product standard
prEN 2240-047Aerospace series. Lamps, incandescent. Lamp,code 718. Product standard
prEN 2240-048Aerospace series. Lamps, incandescent. Lamp,code 718. Product standard
prEN 2240-049Aerospace series. Lamps, incandescent. Lamp,code 757. Product standard
prEN 2240-050Aerospace series. Lamps, incandescent. Lamp,code 1064. Product standard
The above have been issued at CEN Formal Votestage. Copies of the drafts are available onrequest from the contact point (below).Contact: Committee Service CentreEmail: [email protected]
ACE/6
DOCUMENTS NOT ISSUEDAS DPCs
Comments can be sent by email or bypost to named contacts at:–BSI Head Office389 Chiswick High RoadLondon W4 4ALTel: 020 8996 9000
BS EN 14023:2005Bitumen and bituminous binders. Specificationframework for polymer modified bitumens
This standard is currently being revised by CEN.The text has been made available under theCEN UAP to member bodies for final vote.Editorial comments only are allowed at thisstage.If you have editorial comments they should bedirected to the Programme Manager (below).
Contact: Bernard Williams
Email: [email protected]
B/510/19
EN 13848-5:2008/Amendment 1Railway applications. Track. Track geometryquality. Geometric quality levels. Plain line
The above amendment has been circulated byCEN/TC 256 under the shortened UAPprocedure. Copies of the text of theamendment may be obtained from theProgramme Manager (below).
Contact: Tim Newins
Email: [email protected]
RAE/2
ISO/DIS 10672-2Non-destructive testing of welds. Acceptancelevels for radiographic testing. Aluminium andits alloys
This project created by ISO/TC 44/SC 5 is toadopt EN 12517-2:2008 as an ISO standard.Once the ISO is published CEN will consideradoption of it as an EN ISO via the UAP process.
Contact: Anne Hannan
Email: [email protected]
WEE/46
prEN 2240-031Aerospace series. Lamps, incandescent. Lamp,code 356. Product standard
prEN 2240-032Aerospace series. Lamps, incandescent. Lamp,code 376. Product standard
prEN 2240-033Aerospace series. Lamps, incandescent. Lamp,code 377. Product standard
prEN 2240-034Aerospace series. Lamps, incandescent. Lamp,code 382. Product standard
Update Standards Jan 2010 Prices may be subject to change. 49
EN 1058:2009Wood-based panels. Determination ofcharacteristic 5-percentile values andcharacteristic mean values
B/541
EN 1060-2:1995+A1:2009Non-invasive sphygmomanometers.Supplementary requirements for mechanicalsphygmomanometers
CH/205/10
EN 1060-3:1997+A2:2009Non-invasive sphygmomanometers.Supplementary requirements for electro-mechanical blood pressure measuring systems
CH/205/10
EN 1230-1:2009Paper and board intended to come into contactwith foodstuffs. Sensory analysis. Odour
CW/47/3
EN 1330-9:2009Non-destructive testing. Terminology. Termsused in acoustic emission testing
WEE/46
EN 1335-3:—Office furniture. Office work chair. Safety testmethods
CORRIGENDUM 1:November 2009
to EN 1335-3:2009FW/0/3
EN 1349:2009Industrial process control valves
PSE/7/11
EN 1501-1:1998+A2:2009Refuse collection vehicles and their associatedlifting devices. General requirements and safetyrequirements. Rear-end loaded refuse collectionvehicles
B/508/1
EN 1501-2:2005+A1:2009Refuse collection vehicles and associated liftingdevices. General requirements and safetyrequirements. Side loaded refuse collectionvehicles
B/508/1
EN 1539:2009Dryers and ovens, in which flammablesubstances are released. Safety requirements
MCE/3/8
EN 1656:2009Chemical disinfectants and antiseptics.Quantitative suspension test for the evaluationof bactericidal activity of chemical disinfectantsand antiseptics used in the veterinary area. Testmethod and requirements (phase 2, step 1)
CH/216
EN 1744-1:2009Tests for chemical properties of aggregates.Chemical analysis
B/502/6
EN 415-5:2006+A1:2009Safety of packaging machines. Wrappingmachines
MCE/3/3
EN 420:2003+A1:2009Protective gloves. General requirements andtest methods
PH/3/8
EN 621:2009Non-domestic gas-fired forced convection airheaters for space heating not exceeding a netheat input of 300 kW, without a fan to assisttransportation of combustion air and/orcombustion products
GSE/20
EN 622-4:2009Fibreboards. Specifications. Requirements forsoftboards
B/541
EN 622-5:2009Fibreboards. Specifications. Requirements fordry process boards (MDF)
B/541
EN 848-1:2007+A1:2009Safety of woodworking machines. One sidemoulding machines with rotating tool. Singlespindle vertical moulding machines
MTE/23
EN 848-2:2007+A1:2009Safety of woodworking machines. One sidemoulding machines with rotating tool. Singlespindle hand fed/integrated fed routingmachines
MTE/23
EN 859:2007+A1:2009Safety of woodworking machines. Hand fedsurface planing machines
MTE/23
EN 933-11:—Tests for geometrical properties of aggregates.Classification test for the constituents of coarserecycled aggregate
CORRIGENDUM 1:November 2009
to EN 933-11:2009B/502/6
EN 1017:—Chemicals used for treatment of water intendedfor human consumption. Half-burnt dolomite
CORRIGENDUM 1:November 2009
to EN 1017:2008CII/59
EN 1018:—Chemicals used for treatment of water intendedfor human consumption. Calcium carbonate
CORRIGENDUM 1:November 2009
to EN 1018:2006CII/59
prEN ISO 6540(ISO 6540:1980)Maize. Determination of moisture content (onmilled grains and on whole grains)
prEN ISO 11085(ISO 11085:2008)Cereals, cereals-based products and animalfeeding stuffs. Determination of crude fat andtotal fat content by the Randall extractionmethod
The above standards have been circulatedunder the UAP procedure for adoptions asEuropean Standards. Please submit anycomments by 22 January, 2010 to the contactpoint (below).Contact: Committee Service CentreEmail: [email protected]
AW/4
CEN EUROPEANSTANDARDS
EUROPEAN RATIFIED TEXTS
The documents listed below have recentlybeen issued by CEN but have not yet beenpublished as BS ENs. BSI has an obligationto adopt all ENs and to withdraw anyconflicting British Standards (BSs) or partsof BSs. The following will beimplemented as BS ENs or as amendmentsto BS ENs shortly. Notification of theirimplementation will be given in theBS EN Publications section of the relevantedition of Update Standards.
EN 3-10:2009Portable fire extinguishers. Provisions forevaluating the conformity of a portable fireextinguisher to EN 3-7
FSH/2
EN 46-1:2009Wood preservatives. Determination of thepreventive action against recently hatchedlarvae of Hylotrupes bajulus (Linnaeus).Application by surface treatment (laboratorymethod)
B/515
EN 46-2:2009Wood preservatives. Determination of thepreventive action against recently hatchedlarvae of Hylotrupes bajulus (Linnaeus). Ovicidaleffect (laboratory method)
B/515
EN 267:2009Automatic forced draught burners for liquidfuels
GSE/27
EN 343:—Protective clothing. Protection against rain
CORRIGENDUM 1:November 2009
to EN 343:2003/A1:2007PH/3
CEN/CENELEC Unique Acceptance Procedure continued...
50 Update Standards Jan 2010Prices may be subject to change.
EN 4161:2009Aerospace series. Screws, pan head, offsetcruciform recess, coarse tolerance normal shank,long thread, in alloy steel, cadmium plated.Classification. 1100 MPa (at ambienttemperature)/235ºC
ACE/12
EN 4162:2009Aerospace series. Screws 100º countersunknormal head, offset cruciform recess, coarsetolerance normal shank, medium length thread,in alloy steel, cadmium plated. 1100 MPa (at ambient temperature)/235ºC
ACE/12
EN 4163:2009Aerospace series. Screws 100º countersunknormal head, offset cruciform recess, coarsetolerance normal shank, long thread, in alloysteel, cadmium plated. 1100 MPa (at ambienttemperature)/235ºC
ACE/12
EN 4178:2009Aerospace series. Screws, pan head, six loberecess, coarse tolerance normal shank, mediumlength thread, in titanium alloy, anodized,MoS2 lubricated. 1100 MPa (at ambienttemperature)/315ºC
ACE/12
EN 4645-002:2009Aerospace series. Connectors, optical, circular,single and multipin, coupled by threaded ring,self-locking 1,25 mm diameter ferrule withremovable alignment sleeveholder. Specificationof performance and contact arrangements
ACE/6
EN 6069:2009Aerospace series. Rivet, 100º reduced flushhead, close tolerance. Inch series
ACE/12
EN 12001:2003+A1:2009Conveying, spraying and placing machines forconcrete and mortar. Safety requirements
B/513/-/8
EN 12622:2009Safety of machine tools. Hydraulic press brakes
MTE/1/1
EN 12966-1:2005+A1:2009Road vertical signs. Variable message trafficsigns. Product standard
B/509/3
EN 13029:2009Packaging. Light-gauge metal packaging.Apertures for plug-in plastic closures
PKW/0/-/4
EN 13042-1:2007+A1:2009Machines and plants for the manufacture,treatment and processing of hollow glass.Safety requirements. Gob feeder
MCE/3/13
EN 2869:2009Aerospace series. Nuts, hexagonal,slotted/castellated, normal height, normalacross flats, in heat resisting steel, passivated.Classification. 1100 MPa (at ambienttemperature)/650ºC
ACE/12
EN 3660-003:2009Aerospace series. Cable outlet accessories forcircular and rectangular electrical and opticalconnectors. Grommet nut, style A for EN 2997and EN 4067. Product standard
ACE/6
EN 3660-004:2009Aerospace series. Cable outlet accessories forcircular and rectangular electrical and opticalconnectors. Cable outlet, style A, straight,unsealed with clamp strain relief for EN 2997and EN 4067. Product standard
ACE/6
EN 3660-005:2009Aerospace series. Cable outlet accessories forcircular and rectangular electrical and opticalconnectors. Cable outlet, style A, 90º, unsealedwith clamp strain relief for EN 2997 andEN 4067. Product standard
ACE/6
EN 3757:2009Aerospace series. Nuts, anchor, self-locking,floating, self aligning, two lugs, in heatresisting steel, MoS2 lubricated. Classification.900 MPa (at ambient temperature)/315ºC
ACE/12
EN 4073:2009Aerospace series. Screws, pan head, six loberecess, coarse tolerance normal shank, mediumlength thread, in alloy steel, cadmium plated.Classification. 1100 MPa (at ambienttemperature)/235ºC
ACE/12
EN 4078:2009Aerospace series. Inserts, threaded, thin wall,locked and self-locking, in heat resisting steel,MoS2 lubricated. Classification. 1100 MPa (atambient temperature)/315ºC
ACE/12
EN 4084:2009Aerospace series. Nuts, anchor, self-locking,fixed, two lug, with counterbore, in alloy steel,cadmium plated, MoS2 lubricated.Classification. 1100 MPa (at ambienttemperature)/235ºC
ACE/12
EN 4138:2009Aerospace series. Screws, pan head, offsetcruciform recess, coarse tolerance normal shank,medium length thread, in alloy steel, cadmiumplated. Classification. 1100 MPa (at ambienttemperature)/235ºC
ACE/12
EN 1822-1:2009High efficiency air filters (EPA, HEPA and ULPA).Classification, performance testing, marking
MCE/21/3
EN 1822-2:2009High efficiency air filters (EPA, HEPA and ULPA).Aerosol production, measuring equipment,particle counting statistics
MCE/21/3
EN 1822-3:2009High efficiency air filters (EPA, HEPA and ULPA).Testing flat sheet filter media
MCE/21/3
EN 1822-4:2009High efficiency air filters (EPA, HEPA and ULPA).Determining leakage of filter elements (scanmethod)
MCE/21/3
EN 1822-5:2009High efficiency air filters (EPA, HEPA and ULPA).Determining the efficiency of filter elements
MCE/21/3
EN 1993-1-3:—Eurocode 3. Design of steel structures. Generalrules. Supplementary rules for cold-formedmembers and sheeting
CORRIGENDUM 1:November 2009
to EN 1993-1-3:2006B/525/32
EN 2240-002:2009Aerospace series. Lamps, incandescent. Maincharacteristics
ACE/6
EN 2817:2009Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5).Consumable electrode remelted. Solution treatedand precipitation treated. Bar for machining. a orD ≤ 200mm. Rm ≥ 1070 MPa
ACE/61/-/15
EN 2865:2009Aerospace series. Nuts, anchor, self-locking,floating, two lugs, with counterbore, in heatresisting steel, MoS2 lubricated. Classification.1100 MPa (at ambient temperature)/315ºC
ACE/12
EN 2866:2009Aerospace series. Nuts, anchor, self-locking,floating, one lug, with counterbore, in steel,cadmium plated, MoS2 lubricated.Classification. 1110 MPa (at ambienttemperature)/235ºC
ACE/12
EN 2867:2009Aerospace series. Nuts, anchor, self-locking,floating, one lug, with counterbore, in heatresisting steel, MoS2 lubricated. Classification.1100 MPa (at ambient temperature)/315ºC
ACE/12
Update Standards Jan 2010 Prices may be subject to change. 51
EN 15649-5:2009Floating leisure articles for use on and in thewater. Additional specific safety requirementsand test methods for Class C devices
SW/65
EN 15649-6:2009Floating leisure articles for use on and in thewater. Additional specific safety requirementsand test methods for Class D devices
SW/65
EN 15649-7:2009Floating leisure articles for use on and in thewater. Additional specific safety requirementsand test methods for Class E devices
SW/65
EN 15689:2009Railway applications. Track, Switches andcrossings. Crossing components made of castaustenitic manganese steel
RAE/2
EN 15695-1:2009Agricultural tractors and self-propelled sprayers.Protection of the operator (driver) againsthazardous substances. Cab classification,requirements and test procedures
AGE/6
EN 15695-2:2009Agricultural tractors and self-propelled sprayers.Protection of the operator (driver) againsthazardous substances. Filters, requirements andtest procedures
AGE/6
EN 15708:2009Water quality. Guidance standard for thesurveying, sampling and laboratory analysis ofphytobenthos in shallow running water
EH/3/5
EN 15838:2009Soil quality. Leaching procedures for subsequentchemical and ecotoxicological testing of soiland soil materials. Batch test using a liquid tosolid ratio of 2 l/kg dry matter
SVS/0/1
EN 15841:2009Ambient air quality. Standard method fordetermination of arsenic, cadmium, lead andnickel in atmospheric deposition
EH/2/3
CEN WORKSHOPAGREEMENTS
CWA 16026:2009Standardisation of online dispute resolutiontools
no current standard is superseded£84.00 members, £168.00 non-members
CWA 16036:2009Cyber-identity. Unique identification systems fororganizations and parts thereof
no current standard is superseded£90.00 members, £180.00 non-members
EN 14459:—Control functions in electronic systems for gasburners and gas burning appliances. Methodsfor classification and assessment
CORRIGENDUM 1:November 2009
to EN 14459:2007GSE/22
EN 14774-2:2009Solid biofuels. Determination of moisturecontent. Oven dry method. Total moisture.Simplified method
PTI/17
EN 14775:2009Solid biofuels. Determination of ash content
PTI/17
EN 14811:2006+A1:2009Railway applications. Track. Special purpose rail.Grooved and associated construction
RAE/2
EN 14891:—Liquid applied water impermeable products foruse beneath ceramic tiling bonded withadhesives. Requirements, test methods,evaluation of conformity, classification anddesignation
CORRIGENDUM 1:November 2009
to EN 14891:2007B/539
EN 15030:—Chemicals used for treatment of water intendedfor human consumption. Silver salts forintermittent use
CORRIGENDUM 1:November 2009
to EN 15030:2005CII/59
EN 15148:2009Solid biofuels. Determination of the content ofvolatile matter
PTI/17
EN 15200:—Sanitary appliances. Multifunction showercabinets
CORRIGENDUM 1:November 2009
to EN 15200:2007B/503
EN 15649-1:2009Floating leisure articles for use on and in thewater. Classification, materials, generalrequirements and test methods
SW/65
EN 15649-2:2009Floating leisure articles for use on and in thewater. Consumer information
SW/65
EN 15649-3:2009Floating leisure articles for use on and in thewater. Additional specific safety requirementsand test methods for Class A devices
SW/65
EN 13112:2002+A1:2009Tannery machines. Splitting and bandknifeshearing machines. Safety requirements
MCE/3
EN 13114:2002+A1:2009Tannery machines. Rotating process vessels.Safety requirements
MCE/3
EN 13140:2000+A1:2009Agricultural machinery. Sugar beet and fodderbeet harvesting equipment. Safety
AGE/32
EN 13146-9:2009Railway applications. Track. Test methods forfastening systems. Determination of stiffness
RAE/2
EN 13245-2:—Plastics. Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications. Profiles forinternal and external wall and ceiling finishes
CORRIGENDUM 1:November 2009
to EN 13245-2:2008PRI/82
EN 13598-2:—Plastics piping systems for non-pressureunderground drainage and sewerage.Unplasticized poly(vinyl chloride) (PVC-U),polypropylene (PP) and polyethylene (PE).Specifications for manholes and inspectionchambers in traffic areas and deepunderground installations
CORRIGENDUM 1:November 2009
to EN 13598-2:2009PRI/88/1
EN 13674-4:2006+A1:2009Railway applications. Track. Rail. Vignolerailway rails from 27 kg/m to, but excluding 46 kg/m
RAE/2
EN 13803-2:2006+A1:2009Railway applications. Track. Track alignmentdesign parameters. Track gauges 1435 mm andwider. Switches and crossings and comparablealignment design situations with abruptchanges of curvature
RAE/2
EN 13941:—Design and installation of preinsulated bondedpipe systems for district heating
CORRIGENDUM 1:November 2009
to EN 13941:2009RHE/9
EN 14214:2008+A1:2009Automotive fuels. Fatty acid methyl esters(FAME) for diesel engines. Requirements andtest methods
PTI/2
CEN European Standards continued...
52 Update Standards Jan 2010Prices may be subject to change.
EN 60439-3:—Low-voltage switchgear and controlgearassemblies. Particular requirements for low-voltage switchgear and controlgear assembliesintended to be installed in places whereunskilled persons have access for their use.Distribution boards
CORRIGENDUM 3:November 2009
to EN 60439-3:1991PEL/17/3
EN 60601-2-20:2009(IEC 60601-2-20:2009)Medical electrical equipment. Particularrequirements for the basic safety and essentialperformance of infant transport incubators
CH/62/4
EN 60603-7-1:2009(IEC 60603-7-1:2009)Connectors for electronic equipment. Detailspecification for 8-way, shielded, free and fixedconnectors
EPL/48
EN 60603-7-2:2009(IEC 60603-7-2:2007)Connectors for electronic equipment. Detailspecification for 8-way, unshielded, free andfixed connectors, for data transmissions withfrequencies up to 100MHz
EPL/48
EN 60603-7-3:2009(IEC 60603-7-3:2008)Connectors for electronic equipment. Detailspecification for 8-way, shielded, free and fixedconnectors, for data transmissions withfrequencies up to 100MHz
EPL/48
EN 60603-7-5:2009(IEC 60603-7-5:2007)Connectors for electronic equipment. Detailspecification for 8-way, shielded, free and fixedconnectors, for data transmissions withfrequencies up to 250MHz
EPL/48
EN 60603-7:2009(IEC 60603-7:2008)Connectors for electronic equipment. Detailspecification for 8-way, unshielded, free andfixed connectors
EPL/48
EN 60630:—(IEC 60630:1994/A6:2009)Maximum lamp outlines for incandescent lamps
AMENDMENT 6:November 2009
to EN 60630:1998CPL/34/1
EN 60633:—(IEC 60633:1998/A1:2009)Terminology for high-voltage direct current(HVDC) transmission
AMENDMENT 1:November 2009
to EN 60633:1999PEL/22
CEN/TS 15901-9:2009Road and airfield surface characteristics.Procedure for determining the skid resistance ofa pavement surface by measurement of thelongitudinal friction coefficient (LFCD): DWWNLskid resistance trailer
B/510/5
CEN/TS 15901-10:2009Road and airfield surface characteristics.Procedure for determining the skid resistance ofa pavement surface using a device withlongitudinal block measurement (LFCSK): theSkiddometer BV-8
B/510/5
CENELEC PUBLICATIONS
EUROPEAN RATIFIED TEXTS
The documents listed below have recentlybeen issued by CENELEC but have not yetbeen published as BS ENs. BSI has anobligation to adopt all ENs and towithdraw any conflicting BritishStandards (BSs) or parts of BSs. Thefollowing will be implemented as BS ENsor as amendments to BS ENs shortly.Notification of their implementation willbe given in the BS EN Publications sectionof the relevant edition of UpdateStandards.
EN 50173-1:—Information technology. Generic cablingsystems. General requirements
AMENDMENT 1:November 2009
to EN 50173-1:2007TCT/7
EN 55011:2009(IEC CISPR 11:2009)Industrial, scientific and medical equipment.Radio-frequency disturbance characteristics.Limits and methods of measurement
GEL/210/11
EN 60068-2-38:2009(IEC 60068-2-38:2009)Environmental testing. Tests. Test Z/AD.Composite temperature/humidity cyclic test
GEL/104
EN 60269-4:2009(IEC 60269-4:2009)Low-voltage fuses. Supplementary requirementsfor fuse-links for the protection ofsemiconductor devices
PEL/32
EN 60300-3-11:2009(IEC 60300-3-11:2009)Dependability management. Application guide.Reliability centered maintenance
DS/1
CEN REPORTS
CEN/TR 15822:2009Plastics. Biodegradable plastics in or on soil.Recovery, disposal and related environmentalissues
PRI/21
CEN TECHNICALSPECIFICATIONS
CEN/TS 15901-1:2009Road and airfield surface characteristics.Procedure for determining the skid resistance ofa pavement surface using a device withlongitudinal fixed slip ratio (LFCS): RoadSTAR
B/510/5
CEN/TS 15901-2:2009Road and airfield surface characteristics.Procedure for determining the skid resistance ofa pavement surface using a device withlongitudinal controlled slip (LFCRNL): ROAR(Road Analyser and Recorder of Norsemeter)
B/510/5
CEN/TS 15901-3:2009Road and airfield surface characteristics.Procedure for determining the skid resistance ofa pavement surface using a device withlongitudinal controlled slip (LFCA): The ADHERA
B/510/5
CEN/TS 15901-4:2009Road and airfield surface characteristics.Procedure for determining the skid resistance ofpavements using a device with longitudinalcontrolled slip (LFCT): Tatra Runway Tester (TRT)
B/510/5
CEN/TS 15901-5:2009Road and airfield surface characteristics.Procedure for determining the skid resistance ofa pavement surface using a device withlongitudinal controlled slip (LFCRDK): ROAR(Road Analyser and Recorder of Norsemeter)
B/510/5
CEN/TS 15901-6:2009Road and airfield surface characteristics.Procedure for determining the skid resistance ofa pavement surface by measurement of thesideway force coefficient (SFCS): SCRIM
B/510/5
CEN/TS 15901-7:2009Road and airfield surface characteristics.Procedure for determining the skid resistance ofa pavement surface using a device withlongitudinal fixed slip ratio (LFCG): theGripTester
B/510/5
CEN/TS 15901-8:2009Road and airfield surface characteristics.Procedure for determining the skid resistance ofa pavement surface by measurement of thesideway-force coefficient (SFCD): SKM
B/510/5
CEN Reports
54 Update Standards Jan 2010Prices may be subject to change.
CENELEC REPORTS
CLC/TR 62453-41:2009(IEC/TR 62453-41:2009)Field device tool (FDT) interface specification.Object model integration profile. Commonobject model
AMT/7
CLC/TR 62453-61:2009(IEC/TR 62453-61:2009)Field device tool (FDT) interface specification.Device type manager (DTM). Style guide forcommon object model
AMT/7
CLC/TR 62453-501:2009(IEC/TR 62453-501:2009)Field device tool (FDT) interface specification.Communication implementation for commonobject model. IEC 61784 CPF 1
AMT/7
CLC/TR 62453-502:2009(IEC/TR 62453-502:2009)Field device tool (FDT) interface specification.Communication implementation for commonobject model. IEC 61784 CPF 2
AMT/7
CLC/TR 62453-503-1:2009(IEC/TR 62453-503-1:2009)Field device tool (FDT) interface specification.Communication implementation for commonobject model. IEC 61784 CP 3/1 and CP 3/2
AMT/7
CLC/TR 62453-503-2:2009(IEC/TR 62453-503-2:2009)Field device tool (FDT) interface specification.Communication implementation for commonobject model. IEC 61784 CP 3/4, CP 3/5 and CP 3/6
AMT/7
CLC/TR 62453-506:2009(IEC/TR 62453-506:2009)Field device tool (FDT) interface specification.Communication implementation for commonobject model. IEC 61784 CPF 6
AMT/7
CLC/TR 62453-509:2009(IEC/TR 62453-509:2009)Field device tool (FDT) interface specification.Communication implementation for commonobject model. IEC 61784 CPF 9
AMT/7
CLC/TR 62453-515:2009(IEC/TR 62453-515:2009)Field device tool (FDT) interface specification.Communication implementation for commonobject model. IEC 61784 CPF 15
AMT/7
EN 61988-2-3:2009(IEC 61988-2-3:2009)Plasma display panels. Measuring methods.Image quality: defects and degradation
EPL/47
EN 61988-3-2:2009(IEC 61988-3-2:2009)Plasma display panels. Interface. Electricalinterface
EPL/47
EN 62040-3:—Uninterruptible power systems (UPS). Methodof specifying the performance and testrequirements
AMENDMENT 11:November 2009
to EN 62040-3:2001PEL/22
EN 62074-1:2009(IEC 62074-1:2009)Fibre optic interconnecting devices and passivecomponents. Fibre optic WDM devices. Genericspecification
GEL/86/2
EN 62134-1:2009(IEC 62134-1:2009)Fibre optic interconnecting devices and passivecomponents. Fibre optic closures. Genericspecification
GEL/86/2
EN 62223:2009(IEC 62223:2009)Insulators. Glossary of terms and definitions
PEL/36
EN 62282-6-300:2009(IEC 62282-6-300:2009)Fuel cell technologies. Micro fuel cell powersystems. Fuel cartridge interchangeability
GEL/105
EN 62386-205:2009(IEC 62386-205:2009)Digital addressable lighting interface. Particularrequirements for control gear. Supply voltagecontroller for incandescent lamps (device type 4)
CPL/34/3
EN 62386-206:2009(IEC 62386-206:2009)Digital addressable lighting interface. Particularrequirements for control gear. Conversion fromdigital signal into D.C. voltage (device type 5)
CPL/34/3
EN 62386-207:2009(IEC 62386-207:2009)Digital addressable lighting interface. Particularrequirements for control gear. LED modules(device type 6)
CPL/34/3
EN 60738-1:—(IEC 60738-1:2006/A1:2009)Thermistors. Directly heated positivetemperature coefficient. Generic specification
AMENDMENT 1:November 2009
to EN 60738-1:2006EPL/40X
EN 60749-20:2009(IEC 60749-20:2008)Semiconductor devices. Mechanical and climatictest methods. Resistance of plastic encapsulatedSMDs to the combined effect of moisture andsoldering heat
EPL/47
EN 60947-7-3:2009(IEC 60947-7-3:2009)Low-voltage switchgear and controlgear.Ancillary equipment. Safety requirements forfuse terminal blocks
PEL/17/2
EN 61300-2-1:2009(IEC 61300-2-1:2009)Fibre optic interconnecting devices and passivecomponents. Basic test and measurementprocedures. Tests. Vibration (sinusoidal)
GEL/86/2
EN 61300-2-12:2009(IEC 61300-2-12:2009)Fibre optic interconnecting devices and passivecomponents. Basic test and measurementprocedures. Tests. Impact
GEL/86/2
EN 61439-1:2009(IEC 61439-1:2009)Low-voltage switchgear and controlgearassemblies. General rules
PEL/17/3
EN 61439-2:2009(IEC 61439-2:2009)Low-voltage switchgear and controlgearassemblies. Power switchgear and controlgearassemblies
PEL/17/3
EN 61606-1:2009(IEC 61606-1:2009)Audio and audiovisual equipment. Digital audioparts. Basic measurement methods of audiocharacteristics. General
EPL/100
EN 61606-2:2009(IEC 61606-2:2009)Audio and audiovisual equipment. Digital audioparts. Basic measurement methods of audiocharacteristics. Consumer use
EPL/100
EN 61753-086-2:2009(IEC 61753-086-2:2009)Fibre optic interconnecting devices and passivecomponents performance standard. Non-connectorised single-mode bidirectional1490/1550 nm downstream 1310 nm upstreamWWDM devices for category C. Controlledenvironment
GEL/86/2
Update Standards Jan 2010 Prices may be subject to change. 55
IEC 61978-1:2009(Edition 2)
Fibre optic interconnecting devices and passivecomponents. Fibre optic passive chromaticdispersion compensators. Generic specification£108.48 members, £113.00 non-members
GEL/86/2
IEC 61988-5:2009Plasma display panels. Generic specification£100.80 members, £105.00 non-members
EPL/47
IEC 62150-4:2009Fibre optic active components and devices. Testand measurement procedures. Relative intensitynoise using a time-domain optical detectionsystem£57.60 members, £60.00 non-members
GEL/86/3
IEC/TR 62271-305:2009High-voltage switchgear and controlgear.Capacitive current switching capability of air-insulated disconnectors for rated voltagesabove 52 kV£73.92 members, £77.00 non-members
PEL/17/1
IEC 62341-5:2009Organic light emitting diode (OLED) displays.Environmental testing methods£57.60 members, £60.00 non-members
EPL/47
IEC 62423:2009(Edition 2)
Type F and type B residual current operatedcircuit-breakers with and without integralovercurrent protection for household andsimilar uses£134.40 members, £140.00 non-members
PEL/23/1
IEC 62540:2009Radio frequency identification (RFID) ofstationary lead acid cells and monoblocs.Tentative requirements£91.20 members, £95.00 non-members
PEL/21
IEC 62578:2009Power electronics systems and equipment.Operation conditions and characteristics ofactive infeed converter applications£199.68 members, £208.00 non-members
PEL/22
IEC CISPR 22:—Information technology equipment. Radiodisturbance characteristics. Limits and methodsof measurement
INTERPRETATION SHEET 1:October 2009
to IEC CISPR 22:2008GEL/210/11
IEC 60789:—Medical electrical equipment. Characteristicsand test conditions of radionuclide imagingdevices. Anger type gamma cameras
CORRIGENDUM 1:October 2009
to IEC 60789:2005CH/62/3
IEC 60851-1:—Winding wires. Test methods. General
AMENDMENT 2:November 2009
to IEC 60851-1:1996£17.28 members, £18.00 non-members
GEL/55
IEC 61243-3:2009(Edition 2)
Live working. Voltage detectors. Two-pole low-voltage type£199.68 members, £208.00 non-members
PEL/78
IEC 61280-1-4:2009(Edition 2)
Fibre optic communication subsystem testprocedures. General communication subsystems.Light source encircled flux measurementmethod£134.40 members, £140.00 non-members
GEL/86/3
IEC 61300-3-35:2009Fibre optic interconnecting devices and passivecomponents. Basic test and measurementprocedures. Examinations and measurements.Fibre optic connector end face visual andautomated inspection£91.20 members, £95.00 non-members
GEL/86/2
IEC 61753-111-7:2009Fibre optic interconnecting devices and passivecomponents performance standard. Sealedclosures for category A. Aerial£100.80 members, £105.00 non-members
GEL/86/2
IEC 61753-111-8:2009Fibre optic interconnecting devices and passivecomponents performance standard. Sealedclosures for category G. Ground£91.20 members, £95.00 non-members
GEL/86/2
IEC 61753-111-9:2009Fibre optic interconnecting devices and passivecomponents performance standard. Sealedclosures for category S. Subterranean£100.80 members, £105.00 non-members
GEL/86/2
IEC/TR 61916:2009(Edition 2)
Electrical accessories. Harmonization of generalrules£100.80 members, £105.00 non-members
PEL/23
IEC PUBLICATIONS
It is BSI policy to supply the UK version ofall adopted standards, which arepublished as British standards, unlessotherwise requested.
The following IEC publications areavailable from BSI Customer Services (see’How to order’ on page 2)
IEC/ISO 31010:2009Risk management. Risk assessment techniques£220.80 members, £230.00 non-members
DS/1
IEC 60079-29-4:2009Explosive atmospheres. Gas detectors.Performance requirements of open pathdetectors for flammable gases£121.92 members, £127.00 non-members
GEL/31/19
IEC 60092-306:2009(Edition 4)
Electrical installations in ships. Equipment.Luminaires and lighting accessories£83.52 members, £87.00 non-members
JPEL/18
IEC 60191-6:2009(Edition 3)
Mechanical standardization of semiconductordevices. General rules for the preparation ofoutline drawings of surface mountedsemiconductor device packages£134.40 members, £140.00 non-members
EPL/47
IEC 60335-2-30:2009(Edition 5)
Household and similar electrical appliances.Safety. Particular requirements for room heaters£108.48 members, £113.00 non-members
CPL/61/07
IEC 60404-3:—Magnetic materials. Methods of measurementof the magnetic properties of electrical steelstrip and sheet by means of a single sheet tester
AMENDMENT 2:November 2009
to IEC 60404-3:1992£30.72 members, £32.00 non-members
ISE/NFE/5
IEC 60695-1-10:2009Fire hazard testing. Guidance for assessing thefire hazard of electrotechnical products.General guidelines£73.92 members, £77.00 non-members
GEL/89
IEC Publications
56 Update Standards Jan 2010Prices may be subject to change.
ISO 6721-12:2009Plastics. Determination of dynamic mechanicalproperties. Compressive vibration. Non-resonance method£50.88 members, £53.00 non-members
PRI/21
Will be implemented as an identical British Standard
ISO 7176-9:2009(Edition 3)
Wheelchairs. Climatic tests for electricwheelchairs£57.60 members, £60.00 non-members
CH/173/1
Will be implemented as an identical British Standard
ISO 8536-6:2009(Edition 2)
Infusion equipment for medical use. Freezedrying closures for infusion bottles£74.88 members, £78.00 non-members
CH/212
Will be implemented as an identical British Standard
ISO 8724:2009(Edition 2)
Cork decorative panels. Specification£57.60 members, £60.00 non-members
PRI/81
Will not be implemented as a British Standard
ISO 9100-2:—Glass containers. Vacuum lug finishes. 33medium
CORRIGENDUM 1:November 2009
to ISO 9100-2:2005PKW/0/-/7
Will be implemented as an identical British Standard
ISO/IEC 9594-6:—Information technology. Open SystemsInterconnection. The Directory: Selectedattribute types
CORRIGENDUM 2:October 2009
to ISO/IEC 9594-6:2005IST/6
Will not be implemented as a British Standard
ISO/IEC 9594-8:—Information technology. Open SystemsInterconnection. The Directory: Public-key andattribute certificate frameworks
CORRIGENDUM 2:November 2009
to ISO/IEC 9594-8:2005IST/6
Will not be implemented as a British Standard
ISO 10077-1:—Thermal performance of windows, doors andshutters. Calculation of thermal transmittance.General
CORRIGENDUM 1:November 2009
to ISO 10077-1:2006B/540
Will be implemented as an identical British Standard
ISO 639-6:2009Codes for the representation of names oflanguages. Alpha-4 code for comprehensivecoverage of language variants£74.88 members, £78.00 non-members
TS/1
Will be implemented as an identical British Standard
ISO 1926:2009(Edition 4)
Rigid cellular plastics. Determination of tensileproperties£50.88 members, £53.00 non-members
PRI/24
Will be implemented as an identical British Standard
ISO 2062:2009(Edition 3)
Textiles. Yarns from packages. Determination ofsingle-end breaking force and elongation atbreak using constant rate of extension (CRE)tester£57.60 members, £60.00 non-members
TCI/24
Will be implemented as an identical British Standard
ISO 3046-4:2009(Edition 3)
Reciprocating internal combustion engines.Performance. Speed governing£79.68 members, £83.00 non-members
MCE/14/-/6
Will be implemented as an identical British Standard
ISO 3375:2009(Edition 2)
Textile glass. Determination of stiffness ofrovings£38.40 members, £40.00 non-members
PRI/42
Will be implemented as an identical British Standard
ISO 3691-5:2009Industrial trucks. Safety requirements andverification. Pedestrian-propelled trucks£108.48 members, £113.00 non-members
MHE/7
Will be implemented as an identical British Standard
ISO 5536:2009(Edition 2)
Milk fat products. Determination of watercontent. Karl Fischer method£50.88 members, £53.00 non-members
AW/5
Will be implemented as an identical British Standard
ISO 6194-3:2009(Edition 2)
Rotary shaft lip-type seals incorporatingelastomeric sealing elements. Storage, handlingand installation£57.60 members, £60.00 non-members
MCE/11
Will be implemented as an identical British Standard
IEC/PAS PUBLICATIONS
IEC/PAS 61753-1-3:2009Fibre optic interconnecting devices and passivecomponents performance standard. Generaland guidance for performance standards.Single-mode fibre optic connector performancefor harsh industrial operating conditions£91.20 members, £95.00 non-members
GEL/86/2
ISO PUBLICATIONS
It is BSI policy to supply the UK version ofall adopted standards, which arepublished as British standards, unlessotherwise requested.
The following ISO publications areavailable from BSI Customer Services (see’How to order’ on page 2)
ISO 5-1:2009(Edition 2)
Photography and graphic technology. Densitymeasurements. Geometry and functionalnotation£74.88 members, £78.00 non-members
CPW/42
Will be implemented as an identical British Standard
ISO 5-2:2009(Edition 5)
Photography and graphic technology. Densitymeasurements. Geometric conditions fortransmittance density£70.08 members, £73.00 non-members
CPW/42
Will be implemented as an identical British Standard
ISO 5-4:2009(Edition 3)
Photography and graphic technology. Densitymeasurements. Geometric conditions forreflection density£74.88 members, £78.00 non-members
CPW/42
Will be implemented as an identical British Standard
ISO 105-F10:—Textiles. Tests for colour fastness. Specificationfor adjacent fabric. Multifibre
AMENDMENT 1:November 2009
to ISO 105-F10:1989£14.40 members, £15.00 non-members
TCI/81
Will be implemented as an identical British Standard
ISO 148-1:2009(Edition 2)
Metallic materials. Charpy pendulum impacttest. Test method£97.92 members, £102.00 non-members
ISE/NFE/4/4
Will be implemented as an identical British Standard
IEC/PAS Publications
58 Update Standards Jan 2010Prices may be subject to change.
ISO 13351:2009(Edition 2)
Fans. Dimensions£70.08 members, £73.00 non-members
MCE/17
Will be implemented as an identical British Standard
ISO 13624-1:2009Petroleum and natural gas industries. Drillingand production equipment. Design andoperation of marine drilling riser equipment£180.48 members, £188.00 non-members
PSE/17/-/4
Will be implemented as an identical British Standard
ISO 13824:2009Bases for design of structures. Generalprinciples on risk assessment of systemsinvolving structures£122.88 members, £128.00 non-members
B/525/1
Will not be implemented as a British Standard
ISO/IEC 14165-321:2009Information technology. Fibre channel. Audiovideo (FC-AV)£166.08 members, £173.00 non-members
IST/6
Will not be implemented as a British Standard
ISO 14243-1:2009(Edition 2)
Implants for surgery. Wear of total knee-jointprostheses. Loading and displacementparameters for wear-testing machines with loadcontrol and corresponding environmentalconditions for test£70.08 members, £73.00 non-members
CH/150/4
Will be implemented as an identical British Standard
ISO 14243-2:2009(Edition 2)
Implants for surgery. Wear of total knee-jointprostheses. Methods of measurement£38.40 members, £40.00 non-members
CH/150/4
Will be implemented as an identical British Standard
ISO 14343:2009(Edition 2)
Welding consumables. Wire electrodes, stripelectrodes, wires and rods for arc welding ofstainless and heat resisting steels. Classification£74.88 members, £78.00 non-members
WEE/39
Will be implemented as an identical British Standard
ISO/IEC 14496-12:—Information technology. Coding of audio-visualobjects. ISO base media file format
AMENDMENT 1:November 2009
to ISO/IEC 14496-12:2008£131.52 members, £137.00 non-members
IST/37
Will be implemented as an identical British Standard
ISO/TR 11633-1:2009Health informatics. Information securitymanagement for remote maintenance ofmedical devices and medical informationsystems. Requirements and risk analysis£79.68 members, £83.00 non-members
IST/35
Will be implemented as an identical British Standard
ISO/TR 11633-2:2009Health informatics. Information securitymanagement for remote maintenance ofmedical devices and medical informationsystems. Implementation of an informationsecurity management system (ISMS)£145.92 members, £152.00 non-members
IST/35
Will be implemented as an identical British Standard
ISO 11664-5:2009Colorimetry. CIE 1976 L*u*v* Colour space andu’, v’ uniform chromaticity scale diagram£50.88 members, £53.00 non-members
STI/14
Will be implemented as an identical British Standard
ISO 11737-2:2009(Edition 2)
Sterilization of medical devices. Microbiologicalmethods. Tests of sterility performed in thedefinition, validation and maintenance of asterilization process£74.88 members, £78.00 non-members
CH/198
Will be implemented as an identical British Standard
ISO/TS 12033:2009Document management. Electronic imaging.Guidance for the selection of document imagecompression methods£74.88 members, £78.00 non-members
IDT/1/2
Will be implemented as an identical British Standard
ISO 12256:—Aerospace. Drives, internal, cruciform, ribbed.Metric series
CORRIGENDUM 1:November 2009
to ISO 12256:2002ACE/12
Will be implemented as an identical British Standard
ISO/TS 12813:2009Electronic fee collection. Compliance checkcommunication for autonomous systems£122.88 members, £128.00 non-members
EPL/278
Will be implemented as an identical British Standard
ISO/IEC 13170:2009Information technology. 120 mm (8,54 Gbytesper side) and 80 mm (2,66 Gbytes per side) DVD re-recordable disk for dual layer (DVD-RWfor DL)£206.40 members, £215.00 non-members
ICT/-/1
Will not be implemented as a British Standard
ISO/TR 10255:2009Document management applications. Opticaldisk storage technology, management andstandards£97.92 members, £102.00 non-members
IDT/1/2
Will be implemented as an identical British Standard
ISO 10325:2009Fibre ropes. High modulus polyethylene. 8-strand braided ropes, 12-strand braided ropesand covered ropes£45.12 members, £47.00 non-members
TCI/77
Will be implemented as an identical British Standard
ISO 10547:2009Polyester fibre ropes. Double braid construction£38.40 members, £40.00 non-members
TCI/77
Will be implemented as an identical British Standard
ISO 10554:2009Polyamide fibre ropes. Double braidconstruction£38.40 members, £40.00 non-members
TCI/77
Will be implemented as an identical British Standard
ISO 10556:2009Fibre ropes of polyester/polyolefin dual fibres£45.12 members, £47.00 non-members
TCI/77
Will be implemented as an identical British Standard
ISO 10572:2009Mixed polyolefin fibre ropes£50.88 members, £53.00 non-members
TCI/77
Will be implemented as an identical British Standard
ISO 10704:2009Water quality. Measurement of gross alpha andgross beta activity in non-saline water. Thinsource direct deposit method£70.08 members, £73.00 non-members
EH/3
Will be implemented as an identical British Standard
ISO 10874:2009Resilient, textile and laminate floor coverings.Classification£38.40 members, £40.00 non-members
PRI/3/60
Will be implemented as an identical British Standard
ISO 11545:2009(Edition 3)
Agricultural irrigation equipment. Centre-pivotand moving lateral irrigation machines withsprayer or sprinkler nozzles. Determination ofuniformity of water distribution£74.88 members, £78.00 non-members
AGE/30
Will be implemented as an identical British Standard
ISO Publications continued...
60 Update Standards Jan 2010Prices may be subject to change.
ISO 18696:—Textiles. Determination of resistance to waterabsorption. Tumble-jar absorption test
CORRIGENDUM 1:October 2009
to ISO 18696:2006TCI/24
Will be implemented as an identical British Standard
ISO/IEC 19770-2:2009Information technology. Software assetmanagement. Software identification tag£166.08 members, £173.00 non-members
IST/15
Will be implemented as an identical British Standard
ISO/IEC 19794-7:—Information technology. Biometric datainterchange formats. Signature/sign time seriesdata
CORRIGENDUM 1:December 2009
to ISO/IEC 19794-7:2007IST/44
Will be implemented as an identical British Standardby amendment to a National Standard
ISO 21809-4:2009Petroleum and natural gas industries. Externalcoatings for buried or submerged pipelinesused in pipeline transportation systems.Polyethylene coatings (2-layer PE)£113.28 members, £118.00 non-members
PSE/17/2
Will be implemented as an identical British Standard
ISO 22009:2009Space systems. Space environment (natural andartificial). Model of the earth’s magnetosphericmagnetic field£74.88 members, £78.00 non-members
ACE/68/-/4
Will be implemented as an identical British Standard
ISO/TS 22600-3:2009Health informatics. Privilege management andaccess control. Implementations£145.92 members, £152.00 non-members
IST/35
Will be implemented as an identical British Standard
ISO 22769:2009Oil of Australian sandalwood [Santalumspicatum (R.Br.) A.DC.]£57.60 members, £60.00 non-members
AW/54
Will be implemented as an identical British Standard
ISO 22915-4:2009Industrial trucks. Verification of stability. Palletstackers, double stackers and order-pickingtrucks with operator position elevating up toand including 1200 mm lift height£50.88 members, £53.00 non-members
MHE/7
Will be implemented as an identical British Standard
ISO/IEC 15944-7:2009Information technology. Business operationalview. e-Business vocabulary£254.40 members, £265.00 non-members
IST/40
Will be implemented as an identical British Standard
ISO 16245:2009Information and documentation. Boxes, filecovers and other enclosures, made fromcellulosic materials, for storage of paper andparchment documents£50.88 members, £53.00 non-members
IDT/2
Will be implemented as an identical British Standard
ISO 16894:2009Wood-based panels. Oriented strand board(OSB). Definitions, classification andspecifications£70.08 members, £73.00 non-members
B/541
Will not be implemented as a British Standard
ISO 17264:2009Road transport systems. Automatic vehicle andequipment identification. Interfaces£84.48 members, £88.00 non-members
EPL/278
Will be implemented as an identical British Standard
ISO 17267:2009Intelligent transport systems. Navigationsystems. Application programming interface(API)£194.88 members, £203.00 non-members
EPL/278
Will be implemented as an identical British Standard
ISO 17364:2009Supply chain applications of RFID. Returnabletransport items (RTIs)£93.12 members, £97.00 non-members
TW/1
Will be implemented as an identical British Standard
ISO 17365:2009Supply chain applications of RFID. Transportunits£84.48 members, £88.00 non-members
TW/1
Will be implemented as an identical British Standard
ISO 17366:2009Supply chain applications of RFID. Productpackaging£93.12 members, £97.00 non-members
TW/1
Will be implemented as an identical British Standard
ISO 17367:2009Supply chain applications of RFID. Producttagging£122.88 members, £128.00 non-members
TW/1
Will be implemented as an identical British Standard
ISO/IEC 14763-3:—Information technology. Implementation andoperation of customer premises cabling. Testingof optical fibre cabling
AMENDMENT 1:November 2009
to ISO/IEC 14763-3:2006£93.12 members, £97.00 non-members
TCT/7
Will be implemented as an identical British Standard
ISO/IEC 15423:2009(Edition 2)
Information technology. Automaticidentification and data capture techniques. Barcode scanner and decoder performance testing£118.08 members, £123.00 non-members
IST/37
Will be implemented as an identical British Standard
ISO/IEC 15444-12:—Information technology. JPEG 2000 imagecoding system. ISO base media file format
AMENDMENT 1:November 2009
to ISO/IEC 15444-12:2008£131.52 members, £137.00 non-members
IST/37
Will be implemented as an identical British Standard
ISO 15590-1:2009(Edition 2)
Petroleum and natural gas industries. Inductionbends, fittings and flanges for pipelinetransportation systems. Induction bends£108.48 members, £113.00 non-members
PSE/17/2
Will not be implemented as a British Standard
ISO/IEC 15909-2:2009Software and system engineering. High-levelpetri nets. Transfer format£180.48 members, £188.00 non-members
IST/15
Will be implemented as an identical British Standard
ISO/IEC TR 15938-8:—Information technology. Multimedia contentdescription interface. Extraction and use ofMPEG-7 descriptions
AMENDMENT 4:November 2009
to ISO/IEC TR 15938-8:2002£97.92 members, £102.00 non-members
IST/37
Will not be implemented as a British Standard. Isapproved as suitable for use in the UK
ISO/IEC TR 15944-6:2009Information technology. Business operationalview. Technical introduction to e-Businessmodelling£118.08 members, £123.00 non-members
IST/40
Will be implemented as an identical British Standard
Update Standards Jan 2010 Prices may be subject to change. 61
ISO 31000:2009Risk management. Principles and guidelines£97.92 members, £102.00 non-members
RM/1
Will be implemented as an identical British Standard
ISO 80000-1:2009Quantities and units. General£122.88 members, £128.00 non-members
SS/7
Will be implemented as an identical British Standard
ISO 80000-2:2009Quantities and units. Mathematical signs andsymbols to be used in the natural sciences andtechnology£118.08 members, £123.00 non-members
SS/7
Will be implemented as an identical British Standard
ISO 80000-10:2009Quantities and units. Atomic and nuclearphysics£145.92 members, £152.00 non-members
SS/7
Will be implemented as an identical British Standard
ISO GUIDE 34:2009(Edition 3)
General requirements for the competence ofreference material producers£113.28 members, £118.00 non-members
RMI/1
Will be implemented as an identical British Standard
ISO GUIDE 73:2009Risk management. Vocabulary£74.88 members, £78.00 non-members
RM/1
Will be implemented as an identical British Standard
ISO/TS 27105:2009Milk and milk products. Determination of hen’segg white lysozyme by HPLC£57.60 members, £60.00 non-members
AW/5
Will be implemented as an identical British Standard
ISO/TS 27106:2009Cheese. Determination of nisin A content by LC-MS and LC-MS-MS£57.60 members, £60.00 non-members
AW/5
Will be implemented as an identical British Standard
ISO/TS 27790:2009Health informatics. Document registryframework£97.92 members, £102.00 non-members
IST/35
Will be implemented as an identical British Standard
ISO/TS 29062:2009Road vehicles. Child restraint systems. Sled testmethod to enable the evaluation of side impactprotection£84.48 members, £88.00 non-members
AUE/7
Will be implemented as an identical British Standard
ISO/IEC 29141:2009Information technology. Biometrics. Tenprintcapture using biometric applicationprogramming interface (BioAPI)£97.92 members, £102.00 non-members
IST/44
Will be implemented as an identical British Standard
ISO/IEC 29171:2009Information technology. Digitally recordedmedia for information interchange and storage.Information Versatile Disk for Removable usage(iVDR) cartridge£102.72 members, £107.00 non-members
ICT/-/1
Will not be implemented as a British Standard
ISO/TR 29662:2009Petroleum products and other liquids. Guidancefor flash point testing£65.28 members, £68.00 non-members
PTI/13
Will be implemented as an identical British Standard
ISO 29861:2009Document management applications. Qualitycontrol for scanning office documents in colour£45.12 members, £47.00 non-members
IDT/1/1
Will be implemented as an identical British Standard
ISO 29945:2009Refrigerated non-petroleum-based liquefiedgaseous fuels. Dimethylether (DME). Method ofmanual sampling onshore terminals£57.60 members, £60.00 non-members
PTI/12
Will be implemented as an identical British Standard
ISO 22966:2009Execution of concrete structures£137.28 members, £143.00 non-members
B/525/2
Will not be implemented as a British Standard
ISO/IEC 23000-11:2009Information technology. Multimedia applicationformat (MPEG-A). Stereoscopic videoapplication format£93.12 members, £97.00 non-members
IST/37
Will not be implemented as a British Standard. Isapproved as suitable for use in the UK
ISO 23848-1:2009Machine tools. Ball splines. Generalcharacteristics and requirements£93.12 members, £97.00 non-members
MTE/1
Will be implemented as an identical British Standard
ISO 23848-2:2009Machine tools. Ball splines. Dynamic and staticload ratings and rating life£50.88 members, £53.00 non-members
MTE/1
Will be implemented as an identical British Standard
ISO 24153:2009Random sampling and randomizationprocedures£108.48 members, £113.00 non-members
SS/5
Will be implemented as an identical British Standard
ISO/IEC 24739-2:2009Information technology. AT attachment withpacket interface-7. Parallel transport protocolsand physical interconnect (ATA/ATAPI-7)£230.40 members, £240.00 non-members
IST/6
Will not be implemented as a British Standard
ISO 26782:—Anaesthetic and respiratory equipment.Spirometers intended for the measurement oftime forced expired volumes in humans
CORRIGENDUM 1:November 2009
to ISO 26782:2009CH/121
Will be implemented as an identical British Standardby amendment to a National Standard
ISO 26866:2009Road vehicles. Brake lining friction materials.Standard wear test procedure for commercialvehicles with air brakes£65.28 members, £68.00 non-members
AUE/11
Will be implemented as an identical British Standard
ISO 26870:2009Space systems. Launch pad and integration siteoperational documents£74.88 members, £78.00 non-members
ACE/68/-/3
Will be implemented as an identical British Standard
ISO Publications continued...
62 Update Standards Jan 2010Prices may be subject to change.
Help Us to Help
You!
Always quote your Customer Number
Don’t know your number?
Contact Customer Services
020 8996 9001
who will be happy to check it for you
Top Related