1 ISO/TC67 presentation to ISO/TC67/SC4 Stavanger 23,24 May 2011
Global standards used locally worldwide
ISO Technical Committee 67
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas
industries
Neil Reeve
Chairman
up
2 ISO/TC67 presentation to ISO/TC67/SC4 Stavanger 23,24 May 2011
ISO/TC 67
Title Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
Scope Standardization of the materials, equipment and offshore structures used in the drilling, production, transport by pipelines and processing of liquid and gaseous
hydrocarbons within the petroleum, petrochemical and natural gas industries
Excluded: aspects of offshore structures subject to IMO requirements (ISO/TC 8).
3 ISO/TC67 presentation to ISO/TC67/SC4 Stavanger 23,24 May 2011
Kazan - Sept 2009
ISO/TC 67 Vision
Global Standards Used Locally Worldwide
4 ISO/TC67 presentation to ISO/TC67/SC4 Stavanger 23,24 May 2011
Goals ISO/TC 67
Prepare standards required by this industry
Prepare standards that are adopted worldwide by bodies such as ABNT (Brazil), API (USA), CEN (Europe), GOST R (Russian Federation), GSO (Gulf Region) and SAC (China)
Prepare standards that are recognized by regulators
Publish standards that enable companies to minimize their specifications
Deliver standards to the target dates on the agreed work programme
WG8 Materials, welding,
etc.
ISO/TC 67organisation and secretariat
(flag)
• Re-established in 1989 with ANSI/API holding secretariat (till 2009)• Member countries: 28 participating, 32 observing• Involves more than 3000 engineers around the globe• Last annual plenary meeting, Doha, Qatar – 26, 27 October 2010• Next annual meeting, Moscow, September 2011• MC meets three times per year • Published standards: 150 • Current work programme: > 71 standards (new + revisions)
6 ISO/TC67 presentation to ISO/TC67/SC4 Stavanger 23,24 May 2011
Benefits from standards
Cost Reduction - Increase Business Efficiency
Simplify design and procurement; Variety Control
Interchangeability of equipment
Promote stable and global market
Enhance Technical Integrity
Safety, Health and protection of the Environment
Maximise availability, minimise lost revenue
Establish a Common Technology Base
Technology transfer / Sharing best practice / Remove barriers to trade (WTO)
Support Legislation where linked
Safety and Environmental Regulations (e.g. Process Safety Management, US)
Procurement Legislation (e.g. European Directives)
Essential Requirements (e.g. ‘New Approach’ European Directives)
7 ISO/TC67 presentation to ISO/TC67/SC4 Stavanger 23,24 May 2011
Facts and figures – ISO/TC67
150 published standards
70 standards on the work programme (new and rev’s)
Standards are adopted as national standards worldwide
Europe (CEN) has adopted 135 standards as European EN ISO standards.
60 member countries involved
More than 3000 experts actively involved
8 ISO/TC67 presentation to ISO/TC67/SC4 Stavanger 23,24 May 2011
Participating MembersObserving Members
TC67 COUNTRY MEMBERS
Membership continues to grow
9 ISO/TC67 presentation to ISO/TC67/SC4 Stavanger 23,24 May 2011
ISOTC67 has published 150 standards.
API has adopted 76 of these as joint API / ISO standards.
CEN has adopted 135 of these as joint European EN ISO standards.
China, Gulf Region, Russia, Kazakhstan etc. have also adopted many of these ISO standards
Companies use these as the basis for their company standards
10 ISO/TC67 presentation to ISO/TC67/SC4 Stavanger 23,24 May 2011
Standards published by ISO/TC67 in 2010 -1
ISO 21457 Petroleum, petrochemical and natural gas industries -- Materials selection and corrosion control for oil and gas production systems
ISO 28460 Petroleum and natural gas industries – Installation and equipment for liquified natural gas – Ship to shore interface
ISO 21809-5 Petroleum and natural gas industries -- External coatings for buried and submerged pipelines used in pipeline transportation systems – Part 5: External concrete coatings
ISO TS 12747 Petroleum and natural gas industries --Pipeline transportation systems – Pipeline life extension
ISO 13500:2008/Amd 1 Petroleum and natural gas industries – Drilling fluid materials – Specifications and tests
ISO 10426-1:2009/Cor 1 Petroleum and natural gas industries -- Offshore production installations -- Requirements and guidelines for emergency response -- Amendment 1
ISO 17078-1/Amd 1 Petroleum and natural gas industries – Drilling and production equipment – Part 1: Side-pocket mandrels
ISO 17078-4 Petroleum and natural gas industries -- Drilling and production equipment – Part 4: Practices for side pocket mandrels and related equipment
ISO 28781 Petroleum and natural gas industries –Downhole equipment - Subsurface tubing mounted formation barrier valves and related equipment
ISO 13628-1:2005/Amd 1 Petroleum and natural gas industries -- Design and operation of subsea production systems – Part 1: General requirements and recommendations
ISO 13828-4 Petroleum and natural gas industries -- Design and operation of subsea production systems – Part 4: Subsea wellhead and tree equipment
ISO 13680 Petroleum and natural gas industries – Corrosion resistant alloy seamless tubes for use as casing, tubing and coupling stock
ISO 13678 Petroleum and natural gas industries – Evaluation and testing of thread compounds for use with casing, tubing, linepipe and drill stem elements
10
Wide range of globally relevant subjects
11 ISO/TC67 presentation to ISO/TC67/SC4 Stavanger 23,24 May 2011
Standards published by ISO/TC67 in 2010 - 2
ISO TS 27469 Petroleum and natural gas industries – Method of test for offshore fire dampers
ISO 19901-3 Petroleum and natural gas industries -- Specific requirements for offshore structures – Part 3: Topsides structure
ISO 19906 Petroleum and natural gas industries -- Arctic offshore structures
ISO TS 29001 Petroleum, petrochemical and natural gas industries – Sector-specific quality management systems – Requirements for product and service supply organizations
11
12 ISO/TC67 presentation to ISO/TC67/SC4 Stavanger 23,24 May 2011
June 2010, Washington 12
ISO/TC67 Target publication in 2011 - 1ISO 15546 – P&ngi – Aluminium alloy drill pipe
ISO 20312 – P&ngi - Recommended practice for design and operating limits of drill stem of aluminium drill string
ISO 23936-2 – Pp&ngi – Non-metallic materials in contact with media related to oil and gas
ISO 15589-2 – P&ngi – Cathodic protection of pipeline transportation systems – Part 2: Offshore pipelines
ISO 21809-1 – P&ngi – External coatings for buried or submerged pipelines used in pipeline transportation systems – Part 1: Polyolefin coatings (3- layer PE and 3- layer PP)
ISO 21809-2 – P&ngi – External coatings for buried or submerged pipelines used in pipeline transportation systems – Part 2: Single-layered fusion-bonded epoxy coatings
ISO TS 12747 – P&ngi – Pipeline transportation systems – Pipeline life extension
ISO 12490 – P&ngi – Pipeline transportation systems – Actuation, mechanical integrity and sizing for pipeline valves
ISO 10414-2 – P&ngi – Field testing of drilling fluids – Part 2: Oil-based fluids
ISO 13501 – P&ngi – Drilling fluids – Processing systems evaluation
ISO 10426-2 – P&ngi – Cements and materials for well cementing – Part 2: Testing of well cements
ISO 13503-1 – P&ngi – Completion fluids and materials – Measurement of viscous properties of completion fluids
Note:P&ngi – Petroleum and natural gas industries
.... and more coming
13 ISO/TC67 presentation to ISO/TC67/SC4 Stavanger 23,24 May 2011
June 2010, Washington 13
ISO/TC67 Target publication in 2011 - 2ISO 13534 – P&ngi – Drilling and production equipment – Inspection, maintenance, repair and remanufacture of hoisting
equipment
ISO 13535 – P&ngi – Drilling and production equipment – Hoisting equipment
ISO 13628-15 – P&ngi – Design and operation of subsea production systems – Part 15: Subsea structures and manifolds
ISO 13628-16 – P&ngi – Design and operation of subsea production systems – Part 16: Specification for flexible pipe ancilliary equipment
SO 13628-17 – P&ngi – Design and operation of subsea production systems – Part 17: Guidelines for flexible pipe ancillary equipment
ISO 11960 – P&ngi – Steel pipes for use as casing and tubing for wells
ISO 13679 – P&ngi – Procedures for testing casing and tubing connections
ISO 10437 – P&ngi – Steam turbines - Special-purpose specifications
ISO 13706 – Pp&ngi – Air-cooled heat exchangers
ISO 12211 – Pp&ngi – Spiral-type plate heat exchangers
ISO 12212 – Pp&ngi – Hairpin-type plate heat exchangers
ISO 19905-1 – P&ngi – Site-specific assessment of mobile offshore units – Part 1:Jack-ups
ISO 21049 – Pumps – Shaft sealing systems for centrifugal and rotary pumps
14 ISO/TC67 presentation to ISO/TC67/SC4 Stavanger 23,24 May 2011
Response to Macondo and Montara (1)
ISO/TC 67 is reacting to the Macondo (US) and Montara (Australia) accidents:
Prepared action plan including immediate and longer term needs ISO/TC67 document N 1119.
Working closely with all actors involved including American Petroleum Institute (API), International Regulators Forum (IRF), CEN, North Sea Offshore Authorities Forum (NSOAF), Oil and Gas Producers Association (OGP),….
The learnings from an accident in one country must be transferred globally.
International standards developed by ISO/TC 67 are one way of achieving this.
Stakeholders are requested to support and participate actively.
15 ISO/TC67 presentation to ISO/TC67/SC4 Stavanger 23,24 May 2011
Response to Macondo and Montara (2)
Summary standard response needed for:
- Well integrity
- Well control / equipment
- Cementing
- Development and implementation of HSE management systems
- Competence of personnel
16 ISO/TC67 presentation to ISO/TC67/SC4 Stavanger 23,24 May 2011
…………….. API and CEN
17 ISO/TC67 presentation to ISO/TC67/SC4 Stavanger 23,24 May 2011
Global Regulators’ use
ABNTAGA
AODC
ASTM
AS/NZS
CAN/CSA
DMAC DS EN IE
CIS
OIS
AIM
CA
NACENFP
A
NORSOK
NZSOIM
L
UKOOA
Other
0
50
100
150
200
250
7 3 3
26
3
225
33
3 6
55
25
4 3
26
3 4
50
14
73
11
152145
4 7 7 314
6
35
7
49
10 6 4 3 3
2729
54
59 standards from ISO TC 67
OGP report 426
18 ISO/TC67 presentation to ISO/TC67/SC4 Stavanger 23,24 May 2011
Personal recommendations
1. When trading internationally, use the International Standards (ISOs, IECs, ITUs)
2. Companies should maintain a corporate standards system
3. Companies should keep project specifications simple, based on corporate standards
4. Companies should actively participate in development of international standards that are key to them
5. Use ISO/IEC guide 21 for the procedure for national adoption of ISO/IEC standards
6. Adopt as many as possible ISO/IEC standards with as few changes as possible
19 ISO/TC67 presentation to ISO/TC67/SC4 Stavanger 23,24 May 2011
Summary
ISO/TC 67 has a solid portfolio of 150 standards for the oil and gas industry adopted and used all over the world.
They are developed by experts from oil and gas companies, regulators, manufacturers and certification bodies.
The standards are used by companies and accepted by regulators around the world.
“Cooperation, not competition” in standards.
20 ISO/TC67 presentation to ISO/TC67/SC4 Stavanger 23,24 May 2011
Questions
Thank you
ISO/TC 67
http://www.iso.org
Top Related