Dual-mode SureFit Tube
▪ Safest LED T8 on the market▪ Double-end wired with safety switches▪ Ballast compatible▪ AC Line Voltage friendly▪ Patented safety design for anti-shock protection▪ Available in 4-ft and 2-ft, all colors▪ Universal driver (110V-277V)▪ Works with shunted and non-shunted sockets▪ DLC 4.2 qualified
G3 Dimmable LED Tube
▪ Ideal energy saving replacement for traditional T12 and T8 fluorescent lamps▪ TRIAC base (forward phase) dimmer support.entrances, schools, museum and commercial building▪ Double-ended tubes may be installed in either shunted or non-shunted lamp holders▪ Patented safety design for anti-shock protection▪ Driver style: field-replaceable internal driver▪ Lighting is brighter
8-ft Linear Strip Conversion Kit/G13 Socket
▪ Low maintenance cost▪ Suitable for all G13 T8 bi-pin LED tube (double-end LED tube is strongly recommended for safety reasons)▪ Pre-wired conversion kit bracket for easy installation▪ Pre-drilled holes for 8-4I to 2-2I conversion and ballast cover installation▪ Universal driver (110V-277V)
G5 SureFit U-bend LED Tube
▪ UL OOLV certified for plug and play, and UL IFAR certified for direct wire▪ Fits all standard 2'x2' U-bend troffers and sockets▪ Works with Instant Start and Rapid Start ballasts, as well as AC-in line voltage from 110V-277V▪ Double-end wired and does not require the change of the sockets within the fixture, as it supports both shunted and non-shunted tombstones (sockets)▪ Field-replaceable internal driver
EasiFit® T5 Ballast-Compatible LED Tube
▪ Direct-fit, plug & play with T5HO ballast▪ Full nano plastic housing body, giving it the exact look and feel of fluorescent T5 and a very wide lighting angle▪ Fits nicely into the existing T5 fixture without any rewiring▪ Lighting is brighter
LED Cooler Tube
Omni A19 Screw-in LED Bulb▪ Same look-and-feel of an incandescent bulb▪ No dark zone on the base of the bulb▪ Light shines bright and is below the base▪ Driver-less technology▪ Rated for enclosed fixtures▪ Energy efficient▪ Cost-effective▪ Non-dimmable
CF-LED® Lamp PL Replacement▪ 50% energy saving and 75% maintenance reduction▪ Cost-effective▪ Rated for enclosed fixture▪ GX23-2 & G24Q bases are dual-mode: ballast-compatible and line voltage friendly ▪ E26 & GU24 bases are line voltage friendly ▪ Can be installed horizontally or vertically with the same beam spread as traditional lamps
▪ Qualifies for Utility Rebates▪ IP65 rating for moisture proof ▪ LED alternative for refrigerator lighting▪ National grocers, supermarkets, and conveni-ence stores are the perfect target audience for the CoolerTube
aleddra 1Product Catalog4 2 5 . 4 3 0 . 4 5 5 5 | s a l e s @ a l e d d r a . c o m | a l e d d r a . c o m
CF-LED® U-Lamp HID/MH Replacement
▪ AC friendly (ballast must be bypassed)▪ Compact design and half the weight of LEC Corn Light▪ Up to 80% energy savings!▪ Cost-effective HID/MH replacement▪ Mounting style: Base-up (BU), Horizontal or Base-Down (BD)▪ 22W to 50W may be used with enclosed fixture with sufficient housing space▪ 80W not recommended for enclosed fixture
8-ft LED Tube / PLL LED Lamp
▪ UL Rated▪ Made in Italy▪ Non-shunted sockets▪ Only available at Aleddra!
▪ Ballast bypass (Type B)▪ Double-end wired on line voltage▪ Universal driver 110V-277V▪ Clear and frosted lens▪ All popular 8 f-t bases available (FA8, R17D, G13)
▪ Ballast bypass (Type B)▪ Target Replacement Lamps: FT40W/2G11▪ Efficacy: 125 lm/w▪ Energy efficient▪ Cost-effective
Disc Light
▪ Easy integration to new fixture construction▪ Application: Ceiling Light, Flush Mount Fixtures▪ Integral driver-on-board▪ Line-voltage dimmable▪ Title 24 compliant
EasiFit® Troffer Kit
▪ Easy installation, no screw needed▪ Size: 2x2 and 2x4▪ 0-10V Dimmable ▪ Certified for utility rebate▪ DLC Premium listed▪ 7-year warranty (10-year optional)
UFO Highbay Fixture
▪ Saves up to 70% energy as compared to existing highbay fixtures▪ Stylish and modern design and a lower profile▪ Designed for indoor lowbay or highbay application▪ DLC 4.0 qualified for utlity rebate application
Linear Highbay Fixture
▪ Saves up to 70% energy as compared to existing highbay fixtures▪ Meanwell driver ▪ Samsung LED ▪ Motion sensor: optional▪ DLC 4.0 qualified for utility rebate application
Slim Lowbay Canopy
▪ Energy-efficient & cost-effective replacement for existing traditional lowbay canopy luminaire▪ Built with top of the line LEDs and the reputable Meanwell driver ▪ Canopy light uses aluminum die-casting heat sink and exterior ▪ Sleek and asthetic appearance▪ IP65 wet location▪ Ideal for gas station canopy lighting applications
Quick Mounting Wall Pack▪ More than 85% light transmission glass lens ▪ Application: outdoor walkways, security lighting, building entrances, schools, museum and commercial building▪ Back fins on base cover, providing efficient heat dissipation▪ Photocell installed by default▪ 0-10V dimmable for great energy savings▪ Light guard for dark-sky compliance (optional)▪ Vandal protection guard (optional)▪ Photo control and motion sensor (optional)
Slim Vapor Tight▪ Sizes: 2-ft, 4-ft, 8-ft▪ IP65 rated▪ Motion Sensor (optional)▪ Emergency Backup (optional)▪ 180 minutes on battery▪ Battery check by remote control▪ 5-year warranty
Economy LED Vapor Tight Luminaire
▪ Up to 50% Energy Savings▪ Longer operational life▪ Lower maintenance costs▪ IP65 rated ▪ Motion sensor optional ▪ 10-year warranty
LED Flood Light
▪ Compact and light weight▪ Wide range of wattage▪ Higher wattage models can be used for sports field lighting▪ Samsung LED doides▪ 5-year warranty
Slim Shoebox Fixture▪ Energy-efficient and cost-effective replacement for existing parking lot lighting luminaire▪ Slim exterior design yields less wind drag, protective cover on the back prevents bird from nesting▪ Light Distribution: Type III & Type V ▪ Options: Wireless dimming controller, Photocell, 480V driver, square/round mounting brackets ▪ IP65 wet location
aleddra 2Product Catalog4 2 5 . 4 3 0 . 4 5 5 5 | s a l e s @ a l e d d r a . c o m | a l e d d r a . c o m
G5 T8 LED Tube Ballast & AC Compatible | 2-ft & 4-ft
Features▪ Safest LED T8 on the market▪ Double-end wired with safety switches▪ Ballast compatible▪ AC Line Voltage friendly▪ Patented safety design for anti-shock protection▪ Patented replaceable driver to extend LED tube life to 10 years▪ Available in 4-ft and 2-ft, all colors▪ Universal driver (110V-277V)▪ The SureFit tube comes with a field replaceable driver▪ Works with shunted and non-shunted sockets
Product Compliance & Certifications: ▪ UL and cUL Type A/Type B listed (OOLV/OOLV7.E479597)▪ UL and cUL classified (IFAR/IFAR7.E325073)▪ DLC 4.2 qualified
Specifications
Description
Size 2-ft, 4-ft
Lens Type Clear, Diffused
Driver Style Field-replaceable internal driver
Ballast Instant Start
Efficacy Clear lens ≥ 140 lm/w Diffused Lens ≥ 120 lm/w
Color 2700K, 3000K, 3500K 4000K, 5000K, 6000K
CRI > 80
Input Voltage 110V-277V (50-60Hz)
Operating Temp. -20ºF to 122ºF
Power Consumption 2-ft @ 10W, 4-ft @ 15W
Light Output Clear @ 2100lm Diffused @ 1800lm
Beam Angle 180º
Warranty 5-year warranty/50,000 hours
Maintenance personnel can now easily insert a G5 SureFit tube in a fixture just like they would do for an ordinary T8 fluorescent. When the ballast fails, electricians may bypass the ballast for further energy savings. When wired double ended on line voltage, patented saftey switches on both ends make the G5 tube the safest LED T8 on the market.
DOUBLE-END WIRED W/ SAFETY SWITCHESPatented safety switches protect an installer from electric shock hazard, unlike some products on the market, the G5 works with existing T8/T12 sockets, shunted or non-shunted. Furthermore, adds an additional fail safe in case of accidental future fluorescent reinsertion by custodial staff.
AC-LINE VOLTAGE FRIENDLYIt works with direct input voltage from 110V to 277V
THE SUREFIT TUBEIt has a field replaceable driver. You may opt to purchase the field replaceable driver at time of product purchase, effectively extending the product's warranty from 5 years to 10 years. Standard warranty is 5 years/50,000 hours
DARE-YOU-TO-TOUCH-IT TESTIf the other manufacturer inserts one end of their tube into a live fixture and will not touch the pins of the exposed end, then it is not a safe product.
2-ft Ordering InformationModel #
LLT-2-T8-10W-DBA-D-27KLLT-2-T8-10W-DBA-D-30KLLT-2-T8-10W-DBA-D-35KLLT-2-T8-10W-DBA-D-40KLLT-2-T8-10W-DBA-D-50KLLT-2-T8-10W-DBA-D-60KLLT-2-T8-10W-DBA-C-27KLLT-2-T8-10W-DBA-C-30KLLT-2-T8-10W-DBA-C-35KLLT-2-T8-10W-DBA-C-40KLLT-2-T8-10W-DBA-C-50KLLT-2-T8-10W-DBA-C-60K
Size
2-ft2-ft2-ft2-ft2-ft2-ft2-ft2-ft2-ft2-ft2-ft2-ft
Lens
DiffusedDiffusedDiffusedDiffusedDiffusedDiffusedClearClearClearClearClearClear
Wattage
10W10W10W10W10W10W10W10W10W10W10W10W
Lumen
1100lm1100lm1100lm1200lm1200lm1200lm1300lm1300lm1300lm1400lm1400lm1400lm
Color
2700K3000K3500K4000K5000K6000K2700K3000K3500K4000K5000K6000K
4-ft Ordering InformationModel #
LLT-4-T8-15W-DBA-D-27KLLT-4-T8-15W-DBA-D-30KLLT-4-T8-15W-DBA-D-35KLLT-4-T8-15W-DBA-D-40KLLT-4-T8-15W-DBA-D-50KLLT-4-T8-15W-DBA-D-60KLLT-4-T8-15W-DBA-C-27KLLT-4-T8-15W-DBA-C-30KLLT-4-T8-15W-DBA-C-35KLLT-4-T8-15W-DBA-C-40KLLT-4-T8-15W-DBA-C-50KLLT-4-T8-15W-DBA-C-60K
Size
4-ft4-ft4-ft4-ft4-ft4-ft4-ft4-ft4-ft4-ft4-ft4-ft
Lens
DiffusedDiffusedDiffusedDiffusedDiffusedDiffusedClearClearClearClearClearClear
Wattage
15W15W15W15W15W15W15W15W15W15W15W15W
Lumen
1650lm1650lm1650lm1800lm1800lm1800lm1950lm1950lm1950lm2100lm2100lm2100lm
Color
2700K3000K3500K4000K5000K6000K2700K3000K3500K4000K5000K6000K
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
T8 LED Linear Tube G3 Dimmable Double-end
Features
▪ Ideal energy saving replacement for traditional T12 and T8 fluorescent lamps▪ TRIAC base (forward phase) dimmer support.entrances, schools, museum and commercial building▪ Double-ended tubes may be installed in either shunted or non-shunted lamp holders▪ Patented safety design for anti-shock protection▪ Driver style: field-replaceable internal driver
Product Compliance & Certifications: ▪ UL 1598C Classified: #E325073
DescriptionSpecifications
Length 4-ft
Efficacy ≥ 100 LPW (diffused lens)
Color 30K, 41K, 50K, 60K
CRI > 80
Input Voltage 110V-277V (50-60Hz)
Operating Temp. -20ºF-122ºF
Power 4-ft at 18W
Lumen Output 4-ft at 1800lm
Beam Angle 120º
Dimmable via TRIAC based dimmer
Rated Life up to 50,000 hours
Warranty 5-year warranty (12 hours/day usage)
Aleddra’s third-generation double-ended EasiRetrofit® LED tube lamp is now dimmable via TRIAC based dimmer. It has been UL-classified according to the latest 1598C safety standards. It is an ideal energy saving replacement for traditional T12 and T8 fluorescent lamps. The double-ended tubes can be installed in either shunted or non-shunted lamp holders, saving 50-70% installation time and associated labor costs compared to retrofits using standard single-ended LED tubes.
Wiring Diagram
Ordering InformationProduct #
LLT-4-T8-D-SW-120-DM2-D-10-30K*LLT-4-T8-D-SW-120-DM2-D-10-41KLLT-4-T8-D-SW-120-DM2-D-10-50KLLT-4-T8-D-SW-120-DM2-D-10-60K*LLT-4-T8-C-SW-120-DM2-D-10-30K*LLT-4-T8-C-SW-120-DM2-D-10-41KLLT-4-T8-C-SW-120-DM2-D-10-50KLLT-4-T8-C-SW-120-DM2-D-10-60K*LLT-4-T8-D-SW-120-DM1-D-10-30K*LLT-4-T8-D-SW-120-DM1-D-10-41KLLT-4-T8-D-SW-120-DM1-D-10-50KLLT-4-T8-D-SW-120-DM1-D-10-60K*LLT-4-T8-C-SW-120-DM1-D-10-30K*LLT-4-T8-C-SW-120-DM1-D-10-41KLLT-4-T8-C-SW-120-DM1-D-10-50KLLT-4-T8-C-SW-120-DM1-D-10-60K*
Lens
DiffusedDiffusedDiffusedDiffusedClearClearClearClearDiffusedDiffusedDiffusedDiffusedClearClearClearClear
Input Voltage
277V277V277V277V277V277V277V277V110V110V110V110V110V110V110V110V
The third-generation EasiRetrofit® LED tube features a patented field-replaceable driver. It can be installed into the existing tube in less than 2 minutes. It minimizes the repair and replacement downtime in the field and also doubles the lifetime of the LED tube to 10 years at a fraction of the cost of a new tube replace-ment.
Black square indicates ballast. Always ensure that the working voltage is 100v to 277v. This product is directly connected to the power supply. No ballast or starter is needed.
IMPORTANT:Before replacing the existing fluorescent tube, the ballast and starter must be bypassed and the circuit reconnected.
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
8-ft LED T8 Tube
Features
▪ Ballast bypass (Type B)
▪ Double-end wired on line voltage
▪ Universal driver 110V-277V
▪ Clear and frosted lens
▪ All popular 8 f-t bases available (FA8, R17D, G13)
▪ Efficacy: 130 lm/w
▪ CRI: 85
Product Compliance & Certifications: ▪ ETL
DescriptionSpecifications
Base FA8, R17D, G13
Color 30K, 35K, 40K, 50K, 60K
CRI 85
Input Voltage 110V-277V
Operating Temp. -20ºF-122ºF
Power Factor >0.95
Lumen Output 5200lm
Rated Life up to 50,000 hours
Warranty 5-year warranty
The 8-ft LED T8 Tube from Aleddra saves the end user the trouble of converting 8-ft to 4-ft fixtures. It can use the existing fixture and socket directly on line-voltage without replacing the sockets.
The 8-ft LED Tube can save up to 60% energy consumption and minimize the installation costs. It is the ideal option for the 8-ft T8/T12 retrofit.
Ordering InformationProduct #
AL-T8-40P8FT-FA8-30KAL-T8-40P8FT-FA8-35KAL-T8-40P8FT-FA8-40KAL-T8-40P8FT-FA8-50KAL-T8-40P8FT-FA8-60KAL-T8-40P8FT-R17D-30KAL-T8-40P8FT-R17D-35KAL-T8-40P8FT-R17D-40KAL-T8-40P8FT-R17D-50KAL-T8-40P8FT-R17D-60KAL-T8-40P8FT-R17D (G13) 30KAL-T8-40P8FT-R17D (G13) 35KAL-T8-40P8FT-R17D (G13) 40KAL-T8-40P8FT-R17D (G13) 50KAL-T8-40P8FT-R17D (G13) 60K
Length
8-ft8-ft8-ft8-ft8-ft8-ft8-ft8-ft8-ft8-ft8-ft8-ft8-ft8-ft8-ft
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
Base
FA8FA8FA8FA8FA8R17DR17DR17DR17DR17DG13G13G13G13G13
Wattage
40W40W40W40W40W40W40W40W40W40W40W40W40W40W40W
Color
3000K3500K4000K5000K6000K3000K3500K4000K5000K6000K3000K3500K4000K5000K6000K
Wiring without Ballast Diagram
FA8
R17D
G13
G5 SureFit U-bend LED Tube 2’
Features▪ UL OOLV certified for plug and play, and UL IFAR certified for direct wire▪ Fits all standard 2'x2' U-bend troffers and sockets▪ Works with Instant Start and Rapid Start ballasts, as well as AC-in line voltage from 110V-277V▪ Double-end wired and does not require the change of the sockets within the fixture, as it supports both shunted and non-shunted tombstones (sockets)▪ Field-replaceable internal driver
Product Compliance & Certifications: ▪ DLC 4.2 qualified▪ UL Type A/Type B listed (OOLV #E479597)▪ UL Type B classified (IFAR #E325073)
Description
Specifications
Lens Type clear, diffused
Efficacy clear lens ≥ 120 LPW diffused lens ≥ 100 LPW
Color 27K, 30K, 35K, 40K, 50K
CRI > 80
Input Voltage 110V-277V (50-60Hz)
Operating Temp. -20ºF-122ºF
Power 15W
Light Output clear @ 1800lm diffused @ 1500lm
Beam Angle 160º
Ballast Instant Start, Rapid Start
Rated Life up to 50,000 hours
Warranty 5-year warranty
Aleddra’s SureFit® T8 U-bend tube is a smart choice for retrofitting existing fluorescent U-bend T8’s with an energy efficient replace-ment without taking the costly alternative of complete fixture upgrades.
Aleddra’s 2-ft U-bend T8 tube has a 6” separation between the two legs and will fit all standard 2’x2’ U-bend troffers and sockets.
The U-bend tube is double-end wired and does not require the change of the sockets within the fixture, as it supports both shunted and non-shunted tombstones (sockets). It works with Instant Start and Rapid Start ballasts, as well as AC-in line voltage from 110V-277V.
Using a BallastThe SureFit® U-bend tube can directly replace the existing fluorescent U-bend without rewiring.
Using Line VoltageThe installation process is simple and straightforward.
▪ Bypass the ballast
▪ Connect line voltage directly to the stockets (hot on one end and neutral on the other)
▪ Insert the U-bend tubeOrdering InformationProduct #
LLT-2U-T8-15W-BA-C-27KLLT-2U-T8-15W-BA-C-30KLLT-2U-T8-15W-BA-C-35KLLT-2U-T8-15W-BA-C-40KLLT-2U-T8-15W-BA-C-50KLLT-2U-T8-15W-BA-D-27KLLT-2U-T8-15W-BA-D-30KLLT-2U-T8-15W-BA-D-35KLLT-2U-T8-15W-BA-D-40KLLT-2U-T8-15W-BA-D-50K
Lens
ClearClearClearClearClearDiffusedDiffusedDiffusedDiffusedDiffused
Color Temp.
2700K3000K3500K4000K5000K2700K3000K3500K4000K5000K
Photos
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
T8/T12 Conversion Kit 8-ft Linear Strip Fixture Conversion
Features
▪ Low maintenance cost
▪ Suitable for all G13 T8 bi-pin LED tube (double-end
LED tube is strongly recommended for safety reasons)
▪ Pre-wired conversion kit bracket for easy installation
▪ Nice white-paint glossy finish for professional look
▪ Pre-drilled holes for 8-4I to 2-2I conversion and ballast
cover installation
Product Compliance & Certifications:
▪ UL Certified
Description
Aleddra’s T8/T12 conversion kit is designed for
8-ft linear fluorescent tube retrofit. Aleddra is well
known for its EasiRetroFit® double-end LED tube
among the lighting professional. Now with this
conversion kit, the end user with an 8-ft linear
strip can order both. The LED tube and the con-
version kit that can give you energy efficiency
and low costs for all your lighting retrofit
projects.
Details
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
Each kit includes:
G13 T8 bi-pin sockets (tombstones)
Available Kits(8-4I) Conversion Kit8-ft lamps to four 4-ft lamps
(2-2I) Conversion Kit8-ft lamp to four 4-ft lamps
8-4I conversion kit can be reconfigured in the field to 2-2I kit, saving the end user the trouble of having exact counts on both fixtures.
Ordering Information
Product #
Kit-T8-8-4IKit-T8-8-2I
Description
Two 8-ft to four 4-ft lamp conversion kitOne 8-ft to two 4-ft lamp conversion kit
EasiFit® T5 Ballast-Compatible Plastic LED Tube
Features
▪ Direct-fit, plug & play with T5HO ballast
▪ Full nano plastic housing body, giving it the exact
look and feel of fluorescent T5 and a very wide
lighting angle
▪ Fits nicely into the existing T5 fixture without any
rewiring
▪ Lighting is brighter
Product Compliance & Certifications: ▪ UL Type A certified▪ DLC 4.2 qualified
Description
Specifications
Socket Type G5 (standard T5 lamp socket)
Efficacy 104-117 LPW
Color 30K, 35K, 40K, 50K
CRI > 80
Input Voltage 110V-277V (50-60Hz)
Operating Temp. -4ºF-113ºF
Power 28W
Light Output 2900lm to 3200lm
Beam Angle 185º
Warranty 5-years/50,000 hours
Aleddra’s EasiFit® T5 LED tube lamp is a UL
Type A internal driver tube that is compatible
with F54 T5HO ballasts. With a price almost
comparable to a T5 tube, our EasiFit® tube
lasts longer and has great energy savings.
The end user can achieve savings on the
retrofit investment.
The EasiFit® T5 LED tube features a ful l nano
plastic body housing, giving it the exact look
and feel of the f luorescent T5 and has a very
wide l ighting angle. It fits nicely into the
existing T5 fixture without any rewiring, and
the best part is that the l ight is brighter.
Ordering Information
Product #
LLT-4-T5-22-30KLLT-4-T5-22-35KLLT-4-T5-22-40KLLT-4-T5-22-50K
Lumen
2900300032003200
Color
3000K3500K4000K5000K
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
PLL LED Lamp - Ballast Bypass
Features
▪ Ballast bypass (Type B)
▪ Target Replacement Lamps: FT40W/2G11
▪ Efficacy: 125 lm/w
▪ Energy efficient
▪ Cost-effective
▪ 5-year warranty
Product Compliance & Certifications:
▪ UL certified
DescriptionSpecifications
Base 2G11
Color 30K, 35K, 40K, 50K
Wattage 17W
Efficacy 125lm/w
Length 22”
Input Voltage 110V-277V
Operating Temp. -4ºF-120ºF
Power Factor 0.9
Dimmable Non-dimmable
Light Output 30K/35K: 2100lm 40K/50K: 2200lm
Rated Life up to 50,000 hours
Warranty 5-year warranty
Aleddra’s PLL LED lamp is designed for replacing 2-ft 40W PLL lamp (2G11 base) that is used pre-dominantly with 2x2 troffer fixtures. This retrofit lamp avoids the costly fixture upgrade, saves 57.5% on lighting energy consumption from the start, and removes ballast maintenance costs once and for all for the end user. The PLL lamp is UL certified and comes with 5-year warranty.
Ordering InformationProduct #
APLL-23W-2800-BP-30KAPLL-23W-2800-BP-35K APLL-23W-2800-BP-40K APLL-23W-2800-BP-50K
Length
22”22”22”22”
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
Base
2G112G112G112G11
Color
3000K3500K4000K5000K
Lumen
2100210022002200
Wattage
17W17W17W17W
LED CoolerTube External Driver | 4-ft 5-ft 6-ft
Features
▪ Qualifies for Utility Rebates
▪ IP65 rating for moisture proof
▪ LED alternative for refrigerator lighting
▪ National grocers, supermarkets, and convenience
stores are the perfect target audience for the
CoolerTube
Product Compliance & Certifications: ▪ cULus▪ DLC
Specifications
Lens Type clear
Driver Type external driver
Input Voltage 100V-277VAC (50-60Hz)
Output Voltage 36V DC
Efficacy > 95 LPW (clear lens)
Color 30K, 35K, 40K, 45K, 50K
CRI > 80
Operating Temp. -20ºF-122ºF
Power Factor > .90
Beam Angle 170º
Warranty 5-year
Description
A l e d d r a , w i t h i t s s t ro n g i n d u s t r y re p u t a t i o n
w i t h t h e E a s i R e t ro fi t ® L E D t u b e f o r T 1 2 / T 8
re p l a c e m e n t s , i s n o w o f fe r i n g a n L E D
a l t e r n a t i v e f o r re f r i g e r a to r l i g h t i n g .
T h e C o o l e r Tu b e i s d e s i g n e d w i t h a 1 7 0
d e g re e b e a m a n g l e , m e e t i n g t h e n e e d s o f
m e rc h a n d i s e l i g h t i n g o n b o t h s i d e s o f t h e
L E D l i g h t , w h i l e m a i n t a i n i n g a h i g h e f fi c a c y
a t 9 5 l m / w a n d a p o w e r f a c to r 0 . 9 0 .
N a t i o n a l g ro c e r s , s u p e r m a r ke t s , a n d c o n -
v e n i e n c e s to re s a re t h e p e r fe c t t a rg e t c u s -
to m e r f o r t h e C o o l e r Tu b e . I t i s u s e d i n c o o l -
e r s a n d re f r i g e r a to r s . I n a d d i t i o n t h e y b e n e -
fi t f ro m A l e d d r a’s E a s i R e t ro fi t T 8 L E D t u b e
f o r t h e i r c e i l i n g l i g h t i n g .
T h e fe a t u re s o f t h e C o o l e r Tu b e e xc e e d a n y
c o m p e t i t i v e p ro d u c t s o n t h e m a r ke t .
Ordering InformationProduct #
LLT-4-FR-C-22W-35KLLT-4-FR-C-22W-40KLLT-4-FR-C-22W-50KLLT-5-FR-C-22W-35KLLT-5-FR-C-22W-40KLLT-5-FR-C-22W-50KLLT-6-FR-C-30W-35KLLT-6-FR-C-30W-40KLLT-6-FR-C-30W-50K
Length
4-ft4-ft4-ft4-ft5-ft5-ft6-ft6-ft6-ft
Lens
ClearClearClearClearClearClearClearClearClear
Color
3500K4000K5000K3500K4000K5000K3500K4000K5000K
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
LED E26 Screw-In Bulb E26 Base
Features
▪ Same look-and-feel of an incandescent bulb ▪ Driver-less technology▪ Rated for enclosed fixtures▪ Energy efficient▪ Cost-effective▪ Long lasting ▪ Non-dimmable▪ 2-year warranty
Product Compliance & Certifications: ▪ ULSpecifications
DescriptionBulb Type LED A19, LED A21
Base E26
Color 2700K, 4100K
CRI >80
Beam Angle 200º
Input Voltage AC90-135V
Wattage 8W, 10W
Lumen 8W @ 800lm
10W @ 1050lm
Operating Temp. -20ºF to 120ºF
Rated Life 15,000 hoursWarranty 2 year warranty
The first LED screw-in bulb looks exactly like the incandescent bulb. There is no dark zone on the base of the bulb and the light shines below the base. Nobody will steal it. The most cost-effective direct replacement of 60W/75W incandescent bulb with 8W/10W A19 LED screw-in. Start the saving now.
Ordering InformationProduct Model Wattage Color
AA19-8W-27K 8W 2700KAA19-8W-41K 8W 4100KAA21-10W-27K 10W 2700KAA21-10W-41K 10W 4100K
Dimensions
A19 2.36” in diameter, 4.25” in heightA21 2.625” in diameter, 4.40” in height
The traditional A19 LED lamp has a hard cutoff of light at the dark base zone.
The Aleddra A19 bulb doesn’t have a dark zone at the base and puts out light beyond the base.
Before After
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
CF-LED® Lamp E26, GX23-2, G24Q, GU24 bases
Features
▪ 50% energy saving and 75% maintenance reduction
▪ Cost-effective
▪ Rated for enclosed fixture
▪ GX23-2 & G24Q bases are dual-mode: ballast-compatible
and line voltage friendly
▪ E26 & GU24 bases are line voltage friendly
▪ Can be installed horizontally or vertically with the same
beam spread as traditional lamps
▪ 5-year warranty
Product Compliance & Certifications: ▪ UL and cUL Type A/Type B listed (OOLV/OOLV7.E479597)▪ UL and cUL classified (IFAR/IFAR7.E325073)▪ LDL Pending
Specifications
Efficacy 120 LPW
Socket Type E26, GU24 GX23-2 (2-pin), G24Q, (4-pin)
Color 3000K, 4000K, 5000K
CRI > 80
Input Voltage 110V-277V
Operating Temp. -20ºF to 122ºF
Wattage 6W, 11W
Beam Angle 360º
Warranty 5-year warranty
Description
Aleddra’s CF-LED® lamp offers the first 360-degree LED PL lamp with 100 lm/w efficacy. Unlike other LED PL lampson the market today, this revolutionary lamp can be installed either vertically or horizontally with the same beam spread as traditional lamps.
Size6W: 1 3/8”W x 1 3/8”L x 4.5”H (top to socket edge, not including the in-socket length)
11W: 1 3/8”W x 1 3/8”L x 6.1”H (top to socket edge, not including the in-socket length)
Ordering Information (GX23-2/G24Q)
Model #
APL-6-D-GX23-2-30KAPL-6-D-GX23-2-40KAPL-6-D-GX23-2-50KAPL-11-D-GX23-2-30KAPL-11-D-GX23-2-40KAPL-11-D-GX23-2-50KAPL-6-D-G24Q-30KAPL-6-D-G24Q-40KAPL-6-D-G24Q-50KAPL-11-D-G24Q-30KAPL-11-D-G24Q-40KAPL-11-D-G24Q-50K
Socket
GX23-2GX23-2GX23-2GX23-2GX23-2GX23-2G24QG24QG24QG24QG24QG24Q
Lumen
790lm790lm790lm1240lm1240lm1240lm790lm790lm790lm1240lm1240lm1240lm
Replace HID Wattage
13W13W13W26W26W26W13W13W13W26W26W26W
Wattage
6W6W6W11W11W11W6W6W6W11W11W11W
Color
3000K4000K5000K3000K4000K5000K3000K4000K5000K3000K4000K5000K
Ordering Information (E26/GU24)
Model #
APL-6-A-E26-30KAPL-6-A-E26-40KAPL-6-A-E26-50KAPL-11-A-E26-30KAPL-11-A-E26-40KAPL-11-A-E26-50KAPL-6-A-GU24-30KAPL-6-A-GU24-40KAPL-6-A-GU24-50KAPL-11-A-GU24-30KAPL-11-A-GU24-40KAPL-11-A-GU24-50K
Socket
E26E26E26E26E26E26GU24GU24GU24GU24GU24GU24
Lumen
790lm790lm790lm1240lm1240lm1240lm790lm790lm790lm1240lm1240lm1240lm
Replace HID Wattage
13W13W13W26W26W26W13W13W13W26W26W26W
Wattage
6W6W6W11W11W11W6W6W6W11W11W11W
Color
3000K4000K5000K3000K4000K5000K3000K4000K5000K3000K4000K5000K
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
CF-LED® U-Lamp E26, E39 HID/MH Replacement
Features
▪ AC friendly (ballast must be bypassed)▪ Compact design and half the weight of LEC Corn Light▪ Up to 80% energy savings!▪ Cost-effective HID/MH replacement▪ Mounting style: Base-up (BU), Horizontal or Base-Down (BD)▪ 22W to 50W may be used with enclosed fixture with sufficient housing space▪ 80W not recommended for enclosed fixture▪ 5-year warrantyProduct Compliance & Certifications: ▪ cULus Listed▪ DLC 4.0 (E39 base)▪ LDL (E26 base)▪ Patent Pending
Specifications
Description
Aleddra’s CF-LED® U-lamp is the most cost-effective retrofit option for HID lamp with up to 80% energy savings. Compared to LED Corn Light, it is superior in two aspects: half of the weight and smaller in size, which makes it a much better option for enclosed HID fixtures.
This CF-LED U-lamp operates with 110 to 277V AC line voltage without any ballast. It is immediately available in E26 and E39 (mogul base) base.
Efficacy >95 LPW
Socket Type E26, E39, G24Q (22W only)
Color 3000K, 4000K, 5000K
CRI > 80 (>90 optional)
Input Voltage 110V-277V (bypassing ballast)
Operating Temp. -20ºF to 122ºF
Wattage 22W, 30W, 50W, 80W
Beam Angle 360º
Warranty 5-year warranty/50,000 hours
Ordering InformationModel #
ALJ12-22U-830-G24QALJ12-22U-840-G24QALJ12-22U-850-G24QALJ16-22U-830-E26ALJ16-22U-840-E26ALJ16-22U-850-E26ALJ16-30U-830-E26ALJ16-30U-840-E26ALJ16-30U-850-E26
Color
3000K4000K5000K3000K4000K5000K3000K4000K5000K
Wattage
22W22W22W22W22W22W30W30W30W
Replace HID Wattage
65W65W65W65W65W65W100W100W100W
Lumen
2100lm2100lm2100lm2100lm2100lm2100lm3400lm3400lm3400lm
Ordering InformationModel #
ALJ16-50U-830-E26ALJ16-50U-840-E26ALJ16-50U-850-E26ALJ16-50U-830-E39ALJ16-50U-840-E39ALJ16-50U-850-E39ALJ16-80U-830-E39ALJ16-80U-840-E39ALJ16-80U-850-E39
Color
3000K4000K5000K3000K4000K5000K3000K4000K5000K
Wattage
50W50W50W50W50W50W80W80W80W
Replace HID Wattage
175W175W175W175W175W175W250W250W250W
Lumen
5000lm5000lm5000lm5000lm5000lm5000lm7500lm7500lm7500lm
Wattage Diameter Length22W 2.28” 7.48”30W 3.28” 9.56”50W 3.58” 9.84”80W 5” 11.61”
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
Disc Light Round LED Light Engine
Features
▪ Easy integration to new fixture construction▪ Application: Ceiling Light, Flush Mount Fixtures▪ Integral driver-on-board▪ Line-voltage dimmable▪ Title 24 compliant▪ 5 year warranty
Product Compliance & Certifications: ▪ UL CertifiedSpecifications
DescriptionColor 3000K, 4000K
CRI 80
Input Voltage 110V AC
Operating Temp. -20ºF to 120ºF
Wattage 17W, 28W
Lumen 17W @ 1200lm
28W @ 2200lm
Dimming Yes
Rated Life 50,000 hours
Warranty 5 year warranty
The Disc Light is a cost-effective, high-performance
retrofit option for ceiling light, drum fixtures, and flush
mounted fixtures, without going through the trouble of
replacing the complete fixture. Its line-voltage dimma-
ble, making ideal replacement for dimmable incandes-
cent light or CFL light (bypass ballast).
Ordering InformationModel #
AL-4RLE-90-30KAL-4RLE-90-40KAL-7RLE-90-30KAL-7RLE-90-40K
Dimension
4”4”7”7”
Wattage
17W17W28W28W
Max Lumens-Dimmable @CRI80 @3000K
1200lm1200lm2200lm2200lm
Color
3000K4000K3000K4000K
Dimensions
0.78”
0.76”
4.40”
3.5”
3.33”4.40”
7.40”
7.40”
3.5”
5.42”
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
EasiFit® Troffer Kit 2x4, 2x2
Features
▪ Easy installation, no screw needed
▪ 0-10V Dimmable
▪ Certified for utility rebate
Product Compliance & Certifications: ▪ UL▪ DLC 4.2 Premium
DescriptionSpecifications
Efficacy ≥ 126 LM/W
Color 30K (50W), 35K, 40K, 50K
CRI > 80
Input Voltage 110V-277V
Operating Temp. -20ºF-122ºF
Power Factor >0.90
Size 2x2: 22.52”L x 20.67”W x 2.6”H 2x4: 46.61”L x 20.67”W x 2.6”H
Weight 2x2 at 5.3lbs 2x4 at 10.8lbs
Dimming 0-10V dimmable
Warranty 7-year (10-year optional)
Aleddra’s EasiFit® Troffer Retrofit Kit is an
energy-efficient and cost-effective replace -
ment for an existing l inear troffer luminaire.
It fits into the existing troffer housing, saving
the labor of removing it and the trouble of
disposing it . At the same time, i t provides a
more aesthetic appearance than the old
fixture. The 0-10V dimming makes it control -
lable by the dayl ighting harvest system for
further energy savings.
The EasiFit® Troffer Kit is UL/DLC certified
for uti l i ty rebate.
Ordering InformationProduct #
AT-R4-15W-XDZ-35KAT-R4-15W-XDZ-40KAT-R4-15W-XDZ-50KAT-R4-25W-XDZ-35KAT-R4-25W-XDZ-40KAT-R4-25W-XDZ-50KAT-R4-36W-XDZ-35KAT-R4-36W-XDZ-40KAT-R4-36W-XDZ-50KAT-R7-25W-XDZ-35KAT-R7-25W-XDZ-40KAT-R7-25W-XDZ-50KAT-R7-36W-XDZ-35KAT-R7-36W-XDZ-40KAT-R7-36W-XDZ-50K
Size
2x22x22x22x22x22x22x22x22x22x42x42x42x42x42x4
Wattage
15W15W15W25W25W25W36W36W36W25W25W25W36W36W36W
Lumen
202520252025330033003300500050005000337533753375500050005000
Color
3500K4000K5000K3500K4000K5000K3500K4000K5000K3500K4000K5000K3500K4000K5000K
Photos
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
Linear Highbay Fixture 150W, 240W, 320W
Features
▪ Saves up to 70% energy as compared to existing
highbay fixtures
▪ Meanwell driver
▪ 0-10V dimming by default
▪ Motion sensor: optional
Product Compliance & Certifications:
▪ ETL
▪ DLC 4.2
Specifications
Efficacy >103 LPW
CRI > 80
Color 5000K
Beam Angle 120º
Input Voltage 110V-277V
Operating Temp. -20ºF-122ºF
Dimming 0-10V
Warranty 5-year/50,000 hours
Ordering InformationProduct #
AHLB-421-W150-50KAHLB-420-W240-50KAHLB-420-W320-50K
Wattage
150W240W320W
Lumen
16950 lm26700 lm33700 lm
Size
2x32x42x4
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
Description
Aleddra’s Highbay F ixture features a sty l ish design and a s l im profile . I t is des igned for any indoor lowbay or h ighbay appl icat ion. I t saves 70% energy as compared to ex ist ing h ighbay fixtures . I t is DLC 4 .2 qual ified for ut i l i ty rebate appl icat ion.
* 30K, 35K, 40K models are made to order* 480V driver made to order
UFO Highbay Fixture 60W, 100W, 150W, 210W
Features
▪ Saves up to 70% energy as compared to existing
highbay fixtures
▪ Stylish and modern design and a lower profile
▪ Designed for indoor lowbay or highbay application
▪ DLC 4.0 qualified for utlity rebate application
Product Compliance & Certifications:
▪ DLC 4.0
Ordering InformationProduct #
AHB-W060-50KAHB-W100-50KAHB-W150-50KAHB-W200-50K
Wattage
60W100W150W210W
Lumen
6500120001750027000
Voltage
110V-277V110V-277V110V-277V100V-277V
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
Description
Aleddra’s UFO luminai re features a sty l ish des ign and a lower profile . I t is des igned for any indoor lowbay or h ighbay appl icat ions. I t saves up to 70% energy as compared to the ex ist ing h ighbay fixtures .
The UFO Highbay is DLC 4 .0 qual ified for ut i l i ty rebate appl icat ion. The defaul t co lor is 5000K and other colors are opt ional . I t can a lso accommodate the customer ’s need for spc ia l beam angles : 30 , 60 , 90 , or 120 degrees.
Specifications
Driver Meanwell driver
Efficacy >120 LPW
Wattage 60W, 100W, 150W, 210W
Color 5000K
CRI > 70
Input Voltage 110V-277V
Operating Temp. -20ºF-122ºF
Dimming 1-10V dimmable
Beam Angle 120º
Warranty 5-year/50,000 hours
OD9.13” x H3.78”40W, 60W
OD13.46” x H7.64” 100W, 150W, 200W
Light Distribution
* 30K, 35K, 40K models made to order* 30, 60, 90, 150 degree beam angle made to order* 480V driver made to order
Economy LED Vapor Tight Luminaire 2’, 4’
Features
▪ Up to 50% Energy Savings
▪ Longer operational life
▪ Lower maintenance costs
▪ IP65 rated
▪ Motion sensor optional
▪ 10-year warranty
Product Compliance & Certifications:
▪ UL certified
Specifications
Models 2-lamp & 3-lamp available
Size 2-ft & 4-ft
Input Voltage 90V-305V (50-60Hz)
Operating Temp. -40ºF-140ºF
Warranty 10-year warranty
Ordering InformationProduct #
VTF-2-2VTF-4-2VTF-4-3
Length
2-ft4-ft4-ft
# of Tube
223
Voltage
110V-277V110V-277V110V-277V
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
Description
Aleddra’s Economy Vapor T ight luminai re is a cost -ef fect ive upgrade for ex ist ing f luorescent vapor t ight fixtures .
The immediate benefits include a 50% savings on energy consumption, longer operational l i fe , and lower maintenance costs.
The Economy Vapor Tight fixture comes in a 2-lamp or 3- lamp configuration in 2-ft or 4-ft models.
It has an IP65 rating, so it can be used in any wet location.
It ’s ideal for stairwells , parking garages, and loading docks.
Use with Aleddra’s LED Tube
The Economy vapor tight fixture is recommended to be used with Aleddra’s LED tube that is UL and DLC certified for straightforward utility rebate application. With the standard G13 bi-pin sockets, the end user can easily upgrade to the latest Aleddra LED tube down the road.
The vapor tight fixture comes with a 10-year warranty. The fixture tombstones are double-end wired as shown on the right.
*Motion sensor(optional)
*Lamp is not included and should be purchased
Slim Vapor Tight
Features
▪ Sizes: 2-ft, 4-ft, 8-ft
▪ Unique design and appearance, wide beam angle
▪ Various Product Applications: Parking lots, gas
stations, supermarkets, office indoor lighting and
more.
▪ Motion Sensor (optional)
▪ Emergency Backup (optional)
▪ 180 minutes on battery (6W light output)
▪ Battery check by remote control
▪ 5-year warranty
Product Compliance & Certifications:
▪ UL certified
▪ IP65 rated
Specifications
Description
Size 2ft, 4-ft, 8-ft
Efficacy 120lm/w
Color 5000K
CRI ≥82
Beam Angle 270º
Input Voltage 90-305VAC
Power Factor >0.9
Operating Temp. -14ºF to 104ºF
Rated Life 50,000 hours
Warranty 5-year warranty
The Slim Vapor Tight is the best quality enclosure that has a unique appearance and has a wide beam angle. Its built-in aluminum heat sink provides cooling and improves safety. It is IP65 rated. Optional features include the Motion Sensor and the Emergency Backup.
Ordering InformationProduct #
AVT-2FT-20W-50KAVT-2FT-20W-50K-MSAVT-2FT-25W-50K-EBAVT-2FT-25W-50K-MS+EBAVT-4FT-36W-50KAVT-4FT-36W-50K-MSAVT-4FT-45W-50K-EBAVT-4FT-45W-50K-MS+EBAVT-8FT-70W-50KAVT-8FT-70W-50K-MSAVT-8FT-70W-50K-EBAVT-8FT-70W-50K-MS+EB
Size
2-ft2-ft2-ft2-ft4-ft4-ft4-ft4-ft8-ft8-ft8-ft8-ft
Wattage
20W20W25W25W36W36W45W45W70W70W70W70W
Color
5000K5000K5000K5000K5000K5000K5000K5000K5000K5000K5000K5000K
*Other colors made to order
Before AfterDimensionsLength
23.62”47.24”94.48”
Width
3.70”3.70”3.70”
Height
2.36”2.36”2.36”
Type
2-ft, 20W4-ft, 36W8-ft, 70W
*MS (Motion Sensor) *EB (Emergency Backup)
Lumen
256025603200320046004600576057608960896089608960
LED Flood Light 40W, 70W
Features▪ Compact and light weight, wide range of wattage
▪ Higher wattage models can be used for sports
field lighting
▪ Samsung LED doides
▪ Yoke mount bracket with easy lighting direction
adjustment
▪ IP65 for wet location
Product Compliance & Certifications:
▪ ETL
▪ DLC
Ordering InformationProduct #
AL-FL220-W030-60-30KAL-FL220-W030-60-40KAL-FL220-W030-60-50KAL-FL280-W050-60-30KAL-FL280-W050-60-40KAL-FL280-W050-60-50KAL-FL330-W100-60-30KAL-FL330-W100-60-40KAL-FL330-W100-60-50KAL-FL390-W140-60-30KAL-FL390-W140-60-40KAL-FL390-W140-60-50KAL-FL390-W210-60-30KAL-FL390-W210-60-40KAL-FL390-W210-60-50KAL-FL675-W400-60-30KAL-FL675-W400-60-40KAL-FL675-W400-60-50KAL-FL675-W600-60-30KAL-FL675-W600-60-40KAL-FL675-W600-60-50K
Wattage
30W30W30W50W50W50W
100W100W100W140W140W140W210W210W210W400W400W400W600W600W600W
Lumen
26502900300043004550470087009500
10000128001370014000180001940020000432004500046000570005960061000
Weight
3.43.43.47.07.07.0
10.110.110.118.018.018.024.924.924.948.048.048.062.862.862.8
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
Description
Aleddra’s LED F lood L ight is des igned with versat i l i ty in mind. I t ’s compact and l ight weight . I t comes in a wide range of wattage , f rom 30W to 600W, for a l l types of outdoor l ight ing appl icat ions. The h igher wattage models can be used for spor ts fie ld l ight ing. I ts yoke mount bracket prov ides easy adjustment for d i f ferent l ight ing d i rect ion. When mount ing on the bui ld ing , i t can be used as a good wal lpack fixture . I t can a lso be used on the ground or as a wal l wash l ight . The defaul t beam angle is 60 degrees. We a lso of fer many other beam angles on a made-to-order basis .
Specifications
Driver Meanwell driver
Efficacy 85-95 LM/W
Color 30K, 40K, 50K
Wattage 30W to 600W
CRI > 70
Input Voltage 110V-277V (50-60Hz)
Operating Temp. -40ºF-122ºF
Power Factor >0.90
Warranty 5-year warranty
400W: 28”H x 21”W 600W: 28”H x 27”W
Slim Shoebox Fixture 80W, 100W, 150W, 200W, 300W
Features
▪ Energy-efficient and cost-effective replacement
for existing parking lot lighting luminaire
▪ Slim exterior design yields less wind drag, protec-
tive cover on the back prevents bird from nesting
▪ Light Distribution: Type III & Type V
▪ Surge protection
▪ Options: Wireless dimming controller, Photocell,
480V driver, square/round mounting brackets
▪ IP65 wet location
Product Compliance & Certifications:
▪ UL
▪ DLC 4.0
Ordering InformationProduct #
ASB-SBL-3-80W-50KASB-SBL-3-100W-50KASB-SBL-3-150W-50KASB-SBL-3-200W-50KASB-SBL-3-300W-50K
Wattage
80W100W150W200W300W
Light Output
9840 lm12300 lm18450 lm24600 lm37000 lm
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
Description
Aleddra’s S l im Shoebox luminai re is an energy-effic ient and cost -ef fect ive rep lacement for ex ist ing park ing lot l ight ing luminai res . I ts s l im exter ior des ign y ie lds less wind drag and the protect ive cover on the back prevents b i rd f rom nest ing on top of the fixture .
I t is UL cer t ified for wet locat ion l ight ing and comes with IP65 rat ing. The defaul t mount ing opt ion is a s l ipfitter. Other square and round brackets are ava i lab le upon request and can be eas i ly serv iceable in the fie ld .
The fixture is warranted for 5 years and the L70 hours of i ts LED d iode exceed 100,000 hours .
As an opt ion , the fixture can be equipped wi th a 7-p in NEMA receptac le for use wi th a 3- in -1 wi re less contro l -le r that a l lows the fac i l i ty management team to turn on/off , set d imming leve l , schedule photocel l act iva -t ion , and program mult ip le fixtures through a centra l -i zed wire less l ight ing management system.
Specifications
Lens Type Type III and Type V
Driver Meanwell driver
Efficacy 123 LPW
Wattage 80W - 300W
Color 50K (other colors optional)
CRI >82
Input Voltage 110V-277V
Power Factor >0.90
Operating Temp. -40ºF-140ºF
Dimming Wireless dimming optional
Rated Life up to 50,000 hours
Warranty 5-year warranty
Dimension: 30”x14.5”x3.5”Weight: 200W 27.6 lbs, 300W 28.4 lbs
Other color made to order.
Optional: Photo Cell, Wireless dimming controller, 480V driver Square/Round mounting brackets
3-in-1 Wireless Controller & System
Ethernet Gateway▪ Network Type: star-mesh repeater▪ Range: 3 km line of sight▪ Standard: IEEE 802.15.4▪ Frequency: 902-928MHz▪ Power: +24 dBm▪ Number of controllers supported: 2,000▪ Connection: 3G Cellular or 10/100 Ethernet▪ Temperature: -22 to 158 °F▪ Input voltage: 120V (transformer needed for 277V)▪ Cellular carrier certified▪ IP66 rated▪ FCC and IC compliant▪ 5-year limited warranty
Ordering InformationProduct #
TOP900TLXTOP900TLX-EMWX-LVE-180ULumeWave Gateway 2.0Luminsight Desktop Central Management Software
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
Microwave Sensor▪ Detecting range: Pedestrian: 100’ Small vehicle: 165’ Truck: 400’▪ Connection to TOP900 wireless controller▪ Bi-level timeout, tri-level timeout▪ IP65▪ Power: +24 dBm▪ Temperature: -22 to 158 °F▪ Size: 3.5”x3.5”x3.5”▪ FCC approved, UL listed▪ 5-year limited warranty
Wireless Controller Wireless Controller Lite Microwave Sensor
TOP900LTX/E Wireless Controller▪ 3-in-1 wireless controller: Wireless on-off and dimming (0-10V) Integrated Photo-cell Centralized lighting management▪ Input voltage: 110-277V (480V optional)▪ Motion sensor (optional)▪ Secure AES 128-bit encryption▪ Wireless standard: IEEE 802.15.4 Frequency: 902-928MHz Range: 1 mile▪ IP66▪ FCC approved, UL 916/773 listed, RoHS compliant▪ Title 24 compliant▪ 5-year limited warranty
Product Description
Wireless ControllerWireless Controller LiteMicrowave SensorEthernet GatewayLighting Management System
Slim Lowbay Canopy 40W, 70W
Features
▪ Energy-efficient & cost-effective replacement for
existing traditional lowbay canopy luminaire
▪ Built with top of the line LEDs and the reputable
Meanwell driver
▪ IP65 wet location
▪ Die-cast aluminum housing
▪ Ideal for parking garage or low-ceiling canopy
lighting applications
▪ Mounting Options: Surface mount, Pole mount,
Base-plate mount
Product Compliance & Certifications:
▪ UL
▪ DLC 4.0
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
Description
Aleddra’s S l im Lowbay Canopy Luminai re is an energy effic ient and cost -ef fect ive rep lacement for an ex ist -ing t rad i t ional lowbay canopy luminai re . I t ’s bu i l t wi th top of the l ine LEDs and the reputable Meanwel l dr iver, which means , fewer maintenance costs .
I ts IP65 rat ing makes i t idea l for wet locat ions. The S l im Lowbay Canopy Luminai re is UL cer t ified and DLC qual ified for ut i l i ty rebate . I t comes with a 5-year, 50 ,000 hours warranty.
The appl icat ion is idea l for park ing garage or low-ce i l -ing canopy l ight ing appl icat ions.
Specifications
Driver Meanwell driver
Efficacy ≥ 105 LM/W
Color 5000K
CRI > 80
Input Voltage 110V-277V
Power Factor >0.95
Operating Temp. -40ºF-122ºF
Rated Life up to 50,000 hours
Warranty 5-year warranty
Option A: Surface Mount Option B: Pole Mount Option C: Base-plate mount
Ordering InformationProduct #
ACP-24-40W-50KACP-24-70W-50K
Wattage
40W70W
Lumen
43007750
Replacing
150W250W
Weight
5.5lbs6.4lbs
* 5000K in stock, other colors made to order
Dimension: 10.5” x 10.5” x 4”
Quick Mounting Wall Pack AWP-WPL 4 Series
Features▪ More than 85% light transmission glass lens ▪ Application: outdoor walkways, security lighting, building entrances, schools, museum and commercial building▪ Back fins on base cover, providing efficient heat dissipation▪ Photocell installed by default▪ 0-10V dimmable for great energy savings▪ Light guard for dark-sky compliance (optional)▪ Vandal protection guard (optional)▪ Photo control and motion sensor (optional)▪ 5-year warranty
Product Compliance & Certifications: ▪ UL, DLC 4.2▪ IP65 rated
Specifications
Description
Efficacy 100-115 lm/w
Color 5000K
CRI >80
Input Voltage 110V-277V
Operating Temp. -40ºF-140ºF
Wattage 40W, 60W, 80W, 120W
Power Factor >0.94
Photocell Built-in
Dimmable 0-10V
Rated Life up to 76,000 hours
Warranty 5-year warranty
The Quick Mounting Wall Pack is an energy-efficient and cost-effective replacement for the existing wallpack luminaire. Ideal for wet location with its IP65 rating. Superior die-cast aluminum housing with high-durability and long lasting color. A light guard can be attached to the fixture for dary-sky compliant application. Vandal protection guard is alsoavailable.
Dimensions
Ordering InformationProduct #
AWP-WPL-4-40W-50KAWP-WPL-4-60W-50KAWP-WPL-4-90W-50KAWP-WPL-4-120W-50K
Wattage
40W60W90W120W
Lumen
4320lm6545lm9800lm12720lm
Color
5000K5000K5000K5000K
Size
40/60W: 9.25” x 14.3”90/120W: 8.9” x 18.3”
Vandal Guard
Light Guard
aleddra425.430.4555 | [email protected] | [email protected] | www.aleddra.com
Top Related