ZXDSL 9806H Hardware Description v2.1

52
ZXDSL 9806H ZTE Broadband Universal Access System Hardware Description Version: 2.1 ZTE CORPORATION NO. 55, Hi-tech Road South, ShenZhen, P.R.China Postcode: 518057 Tel: (86) 755 26771900 Fax: (86) 755 26770801 URL: http://ensupport.zte.com.cn E-mail: [email protected]

description

ZXDSL 9806HZTE Broadband Universal Access SystemHardware DescriptionVersion: 2.12010-12-15

Transcript of ZXDSL 9806H Hardware Description v2.1

ZXDSL 9806HZTE Broadband Universal Access System

Hardware Description

Version: 2.1

ZTE CORPORATIONNO. 55, Hi-tech Road South, ShenZhen, P.R.ChinaPostcode: 518057Tel: (86) 755 26771900Fax: (86) 755 26770801URL: http://ensupport.zte.com.cnE-mail: [email protected]

LEGAL INFORMATIONCopyright © 2010 ZTE CORPORATION.

The contents of this document are protected by copyright laws and international treaties. Any reproduction or

distribution of this document or any portion of this document, in any form by any means, without the prior written

consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by

contractual confidentiality obligations.

All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE

CORPORATION or of their respective owners.

This document is provided “as is”, and all express, implied, or statutory warranties, representations or conditions

are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose,

title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the

use of or reliance on the information contained herein.

ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications

covering the subject matter of this document. Except as expressly provided in any written license between ZTE

CORPORATION and its licensee, the user of this document shall not acquire any license to the subject matter

herein.

ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice.

Users may visit ZTE technical support website http://ensupport.zte.com.cn to inquire related information.

The ultimate right to interpret this product resides in ZTE CORPORATION.

Revision History

Revision No. Revision Date Revision Reason

R1.0 2009-09-30 First version

R2.0 2010-05-15 Update boards information

R2.1 2010-12-15 Update boards description

Serial Number: SJ-20101208153158-003

Publishing Date: 2010-12-15(R2.1)

ContentsAbout This Manual ......................................................................................... I

Declaration of RoHS Compliance ................................................................. I

Chapter 1 Overview.................................................................................... 1-11.1 System Components .......................................................................................... 1-1

1.2 Application Scenarios ......................................................................................... 1-1

1.3 Performance Specifications................................................................................. 1-1

1.4 Interfaces .......................................................................................................... 1-2

1.5 Power Supply Requirements ............................................................................... 1-2

Chapter 2 System Hardware...................................................................... 2-12.1 Overview ........................................................................................................... 2-1

2.2 Shelf.................................................................................................................. 2-5

2.3 SCCB Card........................................................................................................ 2-6

2.4 SCCBK Card ..................................................................................................... 2-9

2.5 Daughter Cards................................................................................................ 2-13

2.6 ASTEB Card .................................................................................................... 2-14

2.7 ASTDE Card.................................................................................................... 2-15

2.8 ASTEC Card.................................................................................................... 2-16

2.9 ASTGC Card ................................................................................................... 2-17

2.10 VSTDC Card.................................................................................................. 2-18

2.11 VSTDG Card.................................................................................................. 2-19

2.12 VSTDN Card.................................................................................................. 2-20

2.13 VSTDNP Card................................................................................................ 2-21

2.14 VSTEG Card.................................................................................................. 2-22

2.15 VSTEH Card .................................................................................................. 2-23

2.16 ETCA Card .................................................................................................... 2-24

2.17 ETCD Card .................................................................................................... 2-25

2.18 SSTEB Card .................................................................................................. 2-26

2.19 ATLC Card..................................................................................................... 2-27

2.20 ATLA Card ..................................................................................................... 2-28

2.21 ATLCI Card .................................................................................................... 2-28

2.22 ATLCZ Card................................................................................................... 2-29

2.23 ATLDI Card .................................................................................................... 2-30

2.24 Power Cards .................................................................................................. 2-31

I

2.25 Backplane...................................................................................................... 2-32

2.26 Fan Box......................................................................................................... 2-32

Figures............................................................................................................. I

Tables ............................................................................................................ III

Index ...............................................................................................................V

Glossary .......................................................................................................VII

II

About This ManualPurpose

At first, thank you for choosing ZXDSL 9806H Broadband Universal Access Systemof ZTECorporation!

The ZXDSL 9806H (V2.1) provides unified narrowband and broadband access gateway inNGN. By using packet service and TDM double-bus technology, the ZXDSL 9806H (V2.1)is added with narrowband access capability. With the network development, the ZXDSL9806H can transfer to the pure broadband network smoothly.

This purpose of this manual is to let the carrier master the basic information of the ZXDSL9806H.

Intended Audience

This document is intended for:

l Product managerl Maintenance engineerl Software debugging engineer

Prerequisite Skill and Knowledge

To use this document effectively, users should have a basic concept of xDSL technologies,telecommunications technology, and Access Network.

What Is in This Manual

This manual contains the following chapters:

Chapter Summary

Chapter 1, Overview Introduces the system components, applicable

scenarios, features, interfaces and power supply

requirements.

Chapter 2, System Hardware Describes the system hardware such as shelf,

cards, backplane and fan box.

Conventions

ZTE documents employ the following typographical conventions.

Typeface Meaning

Italics References to other Manuals and documents.

“Quotes” Links on screens.

I

Typeface Meaning

Bold Menus, menu options, function names, input fields, radio button names, check

boxes, drop-down lists, dialog box names, window names.

CAPS Keys on the keyboard and buttons on screens and company name.

Note: Provides additional information about a certain topic.

Checkpoint: Indicates that a particular step needs to be checked before

proceeding further.

Tip: Indicates a suggestion or hint to make things easier or more productive

for the reader.

Mouse operation conventions are listed as follows:

Typeface Meaning

Click Refers to clicking the primary mouse button (usually the left mouse button) once.

Double-click Refers to quickly clicking the primary mouse button (usually the left mouse button)

twice.

Right-click Refers to clicking the secondary mouse button (usually the right mouse button)

once.

II

Declaration of RoHSComplianceTo minimize the environmental impact and take more responsibility to the earth we live,this document shall serve as formal declaration that the ZXDSL 9806H manufactured byZTE CORPORATION is in compliance with the Directive 2002/95/EC of the EuropeanParliament - RoHS (Restriction of Hazardous Substances) with respect to the followingsubstances:

l Lead (Pb)l Mercury (Hg)l Cadmium (Cd)l Hexavalent Chromium (Cr (VI))l PolyBrominated Biphenyls (PBB’s)l PolyBrominated Diphenyl Ethers (PBDE’s)

The ZXDSL 9806H manufactured by ZTE CORPORATION meets the requirements of EU

2002/95/EC; however, some assemblies are customized to client specifications. Addition of

specialized, customer-specified materials or processes which do not meet the requirements of

EU 2002/95/EC may negate RoHS compliance of the assembly. To guarantee compliance of the

assembly, the need for compliant product must be communicated to ZTE CORPORATION in written

form. This declaration is issued based on our current level of knowledge. Since conditions of use are

outside our control, ZTE CORPORATION makes no warranties, express or implied, and assumes no

liability in connection with the use of this information.

I

II

Chapter 1OverviewTable of Contents

System Components ..................................................................................................1-1Application Scenarios.................................................................................................1-1Performance Specifications........................................................................................1-1Interfaces ...................................................................................................................1-2Power Supply Requirements ......................................................................................1-2

1.1 System ComponentsThe ZXDSL 9806H (V2.1) is a broadband and narrowband integrated compact accessequipment.

Table 1-1 lists the components of the ZXDSL 9806H system.

Table 1-1 System Components

Item Quantity

Backplane 1

Power card 1

Control and switching card 1

User card 4 (maximum)

Fan box 1

1.2 Application ScenariosThe ZXDSL 9806H is an integrated compact access equipment. It is designed for smallnumber of users.

1.3 Performance SpecificationsTable 1-2 lists the ZXDSL 9806H performance specifications.

Table 1-2 ZXDSL 9806H Performance Specifications

Item Maximum Users

ADSL/ADSL2+ users 128

1-1

SJ-20101208153158-003|2010-12-15(R2.1) ZTE Proprietary and Confidential

ZXDSL 9806H Hardware Description

Item Maximum Users

VDSL2 users 96

SHDSL users 96

Ethernet users 64

POTS users 256

1.4 InterfacesThe ZXDSL 9806H provides the following interfaces:

l Management interfacesl Uplink interfacesl ADSL2/2+ user interfacesl VDSL2 user interfacesl SHDSL user interfacesl Ethernet user interfacesl POTS user interfaces

1.5 Power Supply RequirementsThe ZXDSL 9806H power supply requirements are as follows:

l DC: -48 V (-57 V to -40 V)l AC: 110/220 V (90 V – 286 V)

1-2

SJ-20101208153158-003|2010-12-15(R2.1) ZTE Proprietary and Confidential

Chapter 2System HardwareTable of Contents

Overview....................................................................................................................2-1Shelf...........................................................................................................................2-5SCCB Card ................................................................................................................2-6SCCBK Card..............................................................................................................2-9Daughter Cards........................................................................................................2-13ASTEB Card ............................................................................................................2-14ASTDE Card ............................................................................................................2-15ASTEC Card ............................................................................................................2-16ASTGC Card............................................................................................................2-17VSTDC Card ............................................................................................................2-18VSTDG Card............................................................................................................2-19VSTDN Card ............................................................................................................2-20VSTDNP Card..........................................................................................................2-21VSTEG Card ............................................................................................................2-22VSTEH Card ............................................................................................................2-23ETCA Card...............................................................................................................2-24ETCD Card ..............................................................................................................2-25SSTEB Card ............................................................................................................2-26ATLC Card ...............................................................................................................2-27ATLA Card ...............................................................................................................2-28ATLCI Card ..............................................................................................................2-28ATLCZ Card .............................................................................................................2-29ATLDI Card ..............................................................................................................2-30Power Cards ............................................................................................................2-31Backplane ................................................................................................................2-32Fan Box ...................................................................................................................2-32

2.1 OverviewThe ZXDSL 9806H is composed of cards, backplane and fan box.

Table 2-1 lists all ZXDSL 9806H cards.

2-1

SJ-20101208153158-003|2010-12-15(R2.1) ZTE Proprietary and Confidential

ZXDSL 9806H Hardware Description

Table 2-1 ZXDSL 9806H Cards

Type Name Function External Interfaces

SCCB System control and

switching

l One serial port (Console)

l One out-of-band NM interface (MGT)

l One digital input interface

Main

control

card

SCCBK System control and

switching

l One serial port (Console)

l One out-of-band NM interface (MGT)

l One digital input interface

FEUA Ethernet uplink Two FE electrical interfaces

FEUB Ethernet uplink l One FE electrical interface

l One FE optical interface

FEUC Ethernet uplink Two FE optical interfaces

GFUA Ethernet uplink 2 GE electrical interfaces

GFUB Ethernet uplink l One GE electrical interface

l One GE optical interface

GFUC Ethernet uplink 2 GE optical interfaces

EPNA Ethernet uplink One EPON interface

EPNDA Ethernet uplink l One EPON interface

l One GE electrical interface

EPNBA Ethernet uplink l One EPON interface

l One GE electrical interface

EPNDB Ethernet uplink Two EPON interfaces

EPNBB Ethernet uplink Two EPON interfaces

GPNDA Ethernet uplink One GPON interface

Uplink

daughter

card

GPNDB Ethernet uplink Two GPON interfaces

Voice

pro-

cessing

daughter

card

VOPCB Voice

coding/decoding,

encapsulation/de-

encapsulation, VoIP

resources

-

2-2

SJ-20101208153158-003|2010-12-15(R2.1) ZTE Proprietary and Confidential

Chapter 2 System Hardware

Type Name Function External Interfaces

ASTEB ADSL2/ADSL2+

service access, with

a built-in splitter

l One 24-port PSTN user socket

l One 24-port ADSL user socket

ASTEC ADSL2/ADSL2+

service access, with

a built-in splitter

l One 24-port PSTN user socket

l One 24-port ADSL user socket

ASTDE ADSL service

access, with a

built-in splitter

l One 16-port PSTN user socket

l One 16-port ADSL user socket

ASTGC ADSL2/ADSL2+

service access, with

a built-in splitter

l One 32-port PSTN user socket

l One 32-port ADSL+ user socket

ADSL-

subscr-

iber in-

terface

card

ATLDI ADSL service

access, with a

built-in splitter

l One 64-port PSTN user socket

l One 64-port ADSL user socket

VSTDC VDSL service

access, with a

built-in splitter

l One 16-port PSTN user socket

l One 16-port VDSL user socket

VSTDG VDSL service

access, with a

built-in splitter

l One 16-port PSTN user socket

l One 16-port VDSL user socket

VSTEG VDSL2 service

access, with a

built-in splitter

l One 24-port PSTN user socket

l One 24-port VDSL2 user socket

VSTEH VDSL2 service

access, with a

built-in splitter

l One 24-port PSTN user socket

l One 24-port VDSL2 user socket

VSTDN VDSL service

access, with a

built-in splitter

l One 16-port PSTN user socket

l One 16-port VDSL user socket

VDSL2

sub-

scriber

interface

card

VSTDNP VDSL2 service

access, without a

built-in splitter

One 16-port VDSL2 user socket

2-3

SJ-20101208153158-003|2010-12-15(R2.1) ZTE Proprietary and Confidential

ZXDSL 9806H Hardware Description

Type Name Function External Interfaces

SHDSL

sub-

scriber

interface

card

SSTEB SHDSL service

access

One 24-port SHDSL user socket

ETCA Ethernet service

access

One 16-port Ethernet user interfaceEther-

net sub-

scriber

interface

card

ETCD Ethernet service

access

16 Ethernet user interfaces

l Interfaces from 1 to 2 are GE electrical

interfaces.

l Interfaces from 3 to 16 are FE electrical

interfaces.

ATLA POTS service

access

24 POTS interfaces

ALTC POTS service

access

48 POTS interfaces

ATLCI POTS service

access

48 POTS interfaces

ATLCZ POTS service

access

48 POTS interfaces

POTS

sub-

scriber

interface

card

ATLDI POTS service

access

64 POTS interfaces

BTLC ISDN service

access

8 ISDN interfacesISDN

sub-

scriber

interface

card

BTLCE ISDN service

access

8 ISDN interfaces

ETUC E1 service access 4 E1 interfaces (coaxial)

ETUCE E1 service access 4 E1 interfaces (coaxial)

ETBC E1 service access 4 E1 interfaces (RJ45)

E1 sub-

scriber

interface

cardETBCE E1 service access 4 E1 interfaces (RJ45)

Fan card FAN Speed adjustable

fan

-

2-4

SJ-20101208153158-003|2010-12-15(R2.1) ZTE Proprietary and Confidential

Chapter 2 System Hardware

Type Name Function External Interfaces

PWDHE -48 V DC power

supply

3-core power socketPower

card

PWAHE 220 V AC/110 V AC

power supply

-48 V DC or backup

battery input

3-core power socket and AC socket International

standard compliant

2.2 ShelfStructure

Figure 2-1 and Figure 2-2 show the shelf structure.

Figure 2-1 Shelf Structure (Front View)

Figure 2-2 Shelf Structure (Side View)

Dimensions: 88.1 mm × 482.6 mm × 240 mm Height × Width × Depth

Configuration

In full configuration, the shelf can hold one backplane, one power card, one SCCB card,four user cards and one fan box. Figure 2-3 shows the full configuration.

2-5

SJ-20101208153158-003|2010-12-15(R2.1) ZTE Proprietary and Confidential

ZXDSL 9806H Hardware Description

Figure 2-3 Full Shelf Configuration

Power Consumption

The power consumption of the shelf is 135 W when the system supports the ADSL2/2+service and the shelf is in full configuration.

The power consumption of the shelf is 121 W when the system supports the VDSL serviceand the shelf is in full configuration.

2.3 SCCB CardFunctions

The following are the SCCB card functions:

l Configuration, management and control on the user cardsl Broadband service processing: Supports the access of xDSL service and Ethernet

service. Implements the data switching between the user port and uplink/cascadeport.

l Narrowband service processing: Supports the access of the voice service through theVoIP daughter card.

l Provides FE optical/electrical interfaces, GE optical/electrical interfaces, EPONinterfaces and GPON interfaces through different daughter cards.

Panels

The SCCB panels are various and provide different uplink interfaces depending on differentdaughter cards. The SCCB panels are as shown in the following figures from Figure 2-4to Figure 2-11.

2-6

SJ-20101208153158-003|2010-12-15(R2.1) ZTE Proprietary and Confidential

Chapter 2 System Hardware

Figure 2-4 SCCB Card Panel (2 FE Electrical Interfaces)

Figure 2-5 SCCB Card Panel (1 FE Electrical Interface + 1 FE Optical Interface)

Figure 2-6 SCCB Card Panel (2 FE Optical Interfaces)

Figure 2-7 SCCB Card Panel (2 GE Electrical Interfaces)

Figure 2-8 SCCB Card Panel (1 GE Electrical Interface + 1 GE Optical Interface)

2-7

SJ-20101208153158-003|2010-12-15(R2.1) ZTE Proprietary and Confidential

ZXDSL 9806H Hardware Description

Figure 2-9 SCCB Card Panel (2 GE Optical Interfaces)

Figure 2-10 SCCB Card Panel (1 GPON Interface)

Figure 2-11 SCCB Card Panel (1 EPON Interface)

Interfaces

Table 2-2 lists SCCB card interfaces.

Table 2-2 SCCB Card Interfaces

Interface Description

Uplink interface FE optical/electrical interfaces, GE

optical/electrical interfaces, EPON interfaces and

GPON interface

Local maintenance serial port CONSOLE port, for local maintenance

Out-of-band NM port MGT port, for out-of-band NM and system

debugging

Monitoring socket MONITOR, for digital input signal

Indicators

Table 2-3 lists SCCB card indicators.

2-8

SJ-20101208153158-003|2010-12-15(R2.1) ZTE Proprietary and Confidential

Chapter 2 System Hardware

Table 2-3 SCCB Card Indicators

Indicator Color Status Description

RUN Green Flashing The device is running

normally.

ON Power ONPWR Green

OFF Power OFF

ON Optical link ONL1, L2 Green

OFF Optical link OFF

ON Link ONGreen

OFF Link OFF

ON Data flow occurs.

OFF Data flow does not

occur.

LAN indicators

Yellow

Flashing Data flow occurs.

Features

Table 2-4 lists SCCB card features.

Table 2-4 SCCB Card Features

Item Feature

Maximum users l 96 ADSL/ADSL2+ users

l 64 VDSL2 users

l 96 SHDSL users

l 192 POTS users

l 64 Ethernet users

Power consumption 7.49 W

Hot Swappable Yes

2.4 SCCBK CardFunctions

The following are the SCCBK card functions:

l Configuration, management and control on the user cardsl Broadband service processing: Supports the access of xDSL service and Ethernet

service. Implements the data switching between the user port and uplink/cascadeport.

2-9

SJ-20101208153158-003|2010-12-15(R2.1) ZTE Proprietary and Confidential

ZXDSL 9806H Hardware Description

l Narrowband service processing: Supports the access of the voice service through theVoIP daughter card.

l Provides FE optical/electrical interfaces, GE optical/electrical interfaces, EPONinterfaces and GPON interfaces through different daughter cards.

Panels

The SCCBK panels are various and provide different uplink interfaces depending ondifferent daughter cards. The SCCBK panels are as shown in the following figures fromFigure 2-12 to Figure 2-22.

Figure 2-12 SCCBB Card Panel (2 FE Electrical Interfaces)

Figure 2-13 SCCBK Card Panel (1 FE Electrical Interface + 1 FE Optical Interface)

Figure 2-14 SCCBK Card Panel (2 FE Optical Interfaces)

Figure 2-15 SCCBK Card Panel (2 GE Electrical Interfaces)

2-10

SJ-20101208153158-003|2010-12-15(R2.1) ZTE Proprietary and Confidential

Chapter 2 System Hardware

Figure 2-16 SCCBK Card Panel (1 GE Electrical Interface + 1 GE Optical Interface)

Figure 2-17 SCCBK Card Panel (2 GE Optical Interfaces)

Figure 2-18 SCCBK Card Panel (1 GPON Interface)

Figure 2-19 SCCBK Card Panel (2 GPON Interfaces)

Figure 2-20 SCCBK Card Panel (1 EPON Interface)

2-11

SJ-20101208153158-003|2010-12-15(R2.1) ZTE Proprietary and Confidential

ZXDSL 9806H Hardware Description

Figure 2-21 SCCBK Card Panel (1 EPON Interface + 1 GE Electrical Interface)

Figure 2-22 SCCBK Card Panel (2 EPON Interfaces)

Interfaces

Table 2-5 lists SCCBK card interfaces.

Table 2-5 SCCBK Card Interfaces

Interface Description

Uplink interface FE optical/electrical interfaces, GE

optical/electrical interfaces, EPON interfaces and

GPON interface

Local maintenance serial port CONSOLE port, for local maintenance

Out-of-band NM port MGT port, for out-of-band NM and system

debugging

Monitoring socket MONITOR, for digital input signal

Indicators

Table 2-6 lists SCCBK card indicators.

Table 2-6 SCCBK Card Indicators

Indicator Color Status Description

RUN Green Flashing The device is running

normally.

ON Power ONPWR Green

OFF Power OFF

ON Optical link ONL1, L2 Green

OFF Optical link OFF

2-12

SJ-20101208153158-003|2010-12-15(R2.1) ZTE Proprietary and Confidential

Chapter 2 System Hardware

Indicator Color Status Description

ON Link ONGreen

OFF Link OFF

ON Data flow occurs.

OFF Data flow does not

occur.

LAN indicators

Yellow

Flashing Data flow occurs.

FeaturesTable 2-7 lists SCCBK card features.

Table 2-7 SCCBK Card Features

Item Feature

Maximum users l 96 ADSL/ADSL2+ users

l 64 VDSL2 users

l 96 SHDSL users

l 192 POTS users

l 64 Ethernet users

Power consumption 11.5 W

Hot swappable Yes

2.5 Daughter CardsFunctionsThe ZXDSL 9806H daughter cards include the uplink daughter cards and VoIP daughtercard.

l The uplink daughter cards implement the uplink function.l The VoIP daughter card provides resources of IP/UDP/RTP package functions.

InterfacesTable 2-8 lists the daughter card interfaces.

Table 2-8 Daughter Card Interfaces

Daughter Card Interface Description

FEUA 2 FE electrical interfaces 100 M Ethernet uplink

FEUB 1 FE electrical interface + 1 FE

optical interface

100 M Ethernet uplink

FEUC 2 FE optical interfaces 100 M Ethernet uplink interface

2-13

SJ-20101208153158-003|2010-12-15(R2.1) ZTE Proprietary and Confidential

ZXDSL 9806H Hardware Description

Daughter Card Interface Description

GFUA 2 GE electrical interfaces 1000 M Ethernet uplink

GFUB 1 GE electrical interface + 1 GE

optical interface

1000 M Ethernet uplink interface

GFUC 2 GE optical interfaces 1000 M Ethernet uplink

EPNA 1 EPON interface EPON ONT optical uplink

EPNDA 1 EPON interface + 1 GE electrical

interface

EPON interface is the uplink

interface. GE electrical interface is

the mirroring interface.

EPNBA 1 EPON interface + 1 GE electrical

interface

EPON interface is the uplink

interface. GE electrical interface is

the mirroring interface.

EPNDB 2 EPON interfaces One EPON interface is the working

interface. The other EPON interface

is the protection interface.

EPNBB 2 EPON interfaces One EPON interface is the working

interface. The other EPON interface

is the protection interface.

GPNDA 1 GPON interface GPON ONT optical uplink

GPNDB 2 GPON interfaces One GPON interface is the working

interface. The other GPON interface

is the protection interface.

VOPCB No external interface The VOPCB daughter card provides

VoIP resources to 128 users.

2.6 ASTEB CardFunctions

The following are the ASTEB card functions:

l Provides 24 ADSL/ADSL2+ user ports and POTS ports, implementing the access ofADSL/ADSL2+ service.

l Transfers the ATM cells to IP packets.l The maximum transmission distance is 6.5 km.l The downstream rate reaches up to 26 Mbps and the upstream rate reaches up to 1

Mbps.

Panel

Figure 2-23 shows ASTEB card panel.

2-14

SJ-20101208153158-003|2010-12-15(R2.1) ZTE Proprietary and Confidential

Chapter 2 System Hardware

Figure 2-23 ASTEB Card Panel

SocketsThere are two sockets on ASTEB card panel.

l USER: The cable is connected to the users.l PSTN: The cable is connected to the PSTN switch for transmitting voice signals.

FeaturesTable 2-9 lists ASTEB card features.

Table 2-9 ASTEB Card Features

Item Feature

Dimensions 20.5 mm × 274 mm × 231.2 mm (Height × Width

× Depth)

For the biggest frame: < 10 msecIP frame transmission delay

For the smallest frame: < 1 msec

IP frame transmission loss ratio < 10-7

IP frame transmission error ratio < 10-6

Typical power consumption 23.65 W

Hot swappable Yes

• The conditions for testing the typical power consumption are: 50% users are activated (L0 mode).The transmission distance is 3000 meters and the cable diameter is 0.5 mm.

2.7 ASTDE CardFunctionsThe following are the ASTDE card functions:

l Provides 16 ADSL/ADSL2+ user ports and POTS ports, implementing the access ofADSL/ADSL2+ service.

l Transfers the ATM cells to IP packets.l The maximum transmission distance is 6.5 km.l The downstream rate reaches up to 24 Mbps and the upstream rate reaches up to 1

Mbps.

PanelFigure 2-24 shows ASTDE card panel.

2-15

SJ-20101208153158-003|2010-12-15(R2.1) ZTE Proprietary and Confidential

ZXDSL 9806H Hardware Description

Figure 2-24 ASTDE Card Panel

SocketsThere are two sockets on ASTDE card panel.

l USER: The cable is connected to the users.l PSTN: The cable is connected to the PSTN switch for transmitting voice signals.

FeaturesTable 2-10 lists ASTDE card features.

Table 2-10 ASTDE Card Features

Item Feature

Dimensions 20.5 mm × 274 mm × 231.2 mm (Height × Width

× Depth)

For the biggest frame: < 10 msecIP frame transmission delay

For the smallest frame: < 1 msec

IP frame transmission loss ratio < 10-7

IP frame transmission error ratio < 10-6

Typical power consumption 24 W

Hot swappable Yes

• The conditions for testing the typical power consumption are: 50% users are activated (L0 mode).The transmission distance is 3000 meters and the cable diameter is 0.5 mm.

2.8 ASTEC CardFunctionsThe following are the ASTEC card functions:

l Provides 24 ADSL/ADSL2+ user ports and POTS ports, implementing the access ofADSL/ADSL2+ service.

l Transfers the ATM cells to IP packets.l The maximum transmission distance is 6.5 km.l The downstream rate reaches up to 26 Mbps and the upstream rate reaches up to 1

Mbps.

PanelFigure 2-25 shows ASTEC card panel.

2-16

SJ-20101208153158-003|2010-12-15(R2.1) ZTE Proprietary and Confidential

Chapter 2 System Hardware

Figure 2-25 ASTEC Card Panel

Sockets

There are two sockets on ASTEC card panel.

l USER: The cable is connected to the users.l PSTN: The cable is connected to the PSTN switch for transmitting voice signals.

Features

Table 2-11 lists ASTEC card features.

Table 2-11 ASTEC Card Features

Item Feature

Dimensions 20.5 mm × 274 mm × 231.2 mm (Height × Width

× Depth)

For the biggest frame: < 10 msecIP frame transmission delay

For the smallest frame: < 1 msec

IP frame transmission loss ratio < 10-7

IP frame transmission error ratio < 10-6

Typical power consumption 14.4 W

Hot swappable Yes

• The conditions for testing the typical power consumption are: 50% users are activated (L0 mode).The transmission distance is 3000 meters and the cable diameter is 0.5 mm.

2.9 ASTGC CardFunctions

The following are the ASTGC card functions:

l Provides 32 ADSL2/ADSL2+ user ports and POTS ports, implementing the access ofADSL2+ service.

l Transfers the ATM cells to IP packets.

Panel

Figure 2-26 shows ASTGC card panel.

2-17

SJ-20101208153158-003|2010-12-15(R2.1) ZTE Proprietary and Confidential

ZXDSL 9806H Hardware Description

Figure 2-26 ASTGC Panel

Sockets

There are two sockets on ASTGC card panel.

l USER: The cable is connected to the users.l PSTN: The cable is connected to the PSTN switch for transmitting voice signals.

Features

Table 2-12 lists ASTGC card features.

Table 2-12 ASTGC Card Features

Item Feature

Dimensions 20.5 mm × 274 mm × 231.2 mm (Height × Width

× Depth)

For the biggest frame: < 10 msecIP frame transmission delay

For the smallest frame: < 1 msec

IP frame transmission loss ratio < 10-7

IP frame transmission error ratio < 10-6

Typical power consumption 19.84 W

Hot swappable Yes

• The conditions for testing the typical power consumption are: 50% users are activated (L0 mode).The transmission distance is 3000 meters and the cable diameter is 0.5 mm.

2.10 VSTDC CardFunctions

The following are the VSTDC card functions:

l Provides 16 VDSL2 user ports and POTS ports, implementing the access of VDSL2service.

l The maximum transmission distance is 2.5 km.l The downstream rate reaches up to 85 Mbps and the upstream rate reaches up to 50

Mbps.

Panel

Figure 2-27 shows VSTDC card panel.

2-18

SJ-20101208153158-003|2010-12-15(R2.1) ZTE Proprietary and Confidential

Chapter 2 System Hardware

Figure 2-27 VSTDC Card Panel

SocketsThere are two sockets on VSTDC card panel.

l USER: The cable is connected to the users.l PSTN: The cable is connected to the PSTN switch for transmitting voice signals.

FeaturesTable 2-13 lists VSTDC card features.

Table 2-13 VSTDC Card Features

Item Feature

Dimensions 20.5 mm × 274 mm × 231.2 mm (Height × Width

× Depth)

For the biggest frame: < 10 msecIP frame transmission delay

For the smallest frame: < 1 msec

IP frame transmission loss ratio < 10-7

IP frame transmission error ratio < 10-6

Typical power consumption 24.4 W

Hot swappable Yes

• The conditions for testing the typical power consumption are: 50% users are activated (L0 mode).The profile 17a is configured. The transmission distance is 750 meters and the cable diameter is 0.5mm.

2.11 VSTDG CardFunctionsThe following are the VSTDG card functions:

l Provides 16 VDSL2 user ports and POTS ports, implementing the access of VDSL2service.

l The maximum transmission distance is 2.5 km.l The downstream rate reaches up to 100 Mbps and the upstream rate reaches up to

60 Mbps.

PanelFigure 2-28 shows VSTDG card panel.

2-19

SJ-20101208153158-003|2010-12-15(R2.1) ZTE Proprietary and Confidential

ZXDSL 9806H Hardware Description

Figure 2-28 VSTDG Card Panel

SocketsThere are two sockets on VSTDG card panel.

l USER: The cable is connected to the users.l PSTN: The cable is connected to the PSTN switch for transmitting voice signals.

FeaturesTable 2-14 lists VSTDG card features.

Table 2-14 VSTDG Card Features

Item Feature

Dimensions 20.5 mm × 274 mm × 231.2 mm (Height × Width

× Depth)

For the biggest frame: < 10 msecIP frame transmission delay

For the smallest frame: < 1 msec

IP frame transmission loss ratio < 10-7

IP frame transmission error ratio < 10-6

Typical power consumption 17 W

Hot swappable Yes

• The conditions for testing the typical power consumption are: 50% users are activated (L0 mode).The profile 17a is configured. The transmission distance is 750 meters and the cable diameter is 0.5mm.

2.12 VSTDN CardFunctionsThe following are the VSTDN card functions:

l Provides 16 VDSL2 user ports and POTS ports, implementing the access of VDSL2service.

l The maximum transmission distance is 2.5 km.l The downstream rate reaches up to 100 Mbps and the upstream rate reaches up to

100 Mbps.

PanelFigure 2-29 shows VSTDN card panel.

2-20

SJ-20101208153158-003|2010-12-15(R2.1) ZTE Proprietary and Confidential

Chapter 2 System Hardware

Figure 2-29 VSTDN Card Panel

Sockets

There are two sockets on VSTDN card panel.

l USER: The cable is connected to the users.l PSTN: The cable is connected to the PSTN switch for transmitting voice signals.

Features

Table 2-15 lists VSTDN card features.

Table 2-15 VSTDN Card Features

Item Feature

Dimensions 20.5 mm × 274 mm × 231.2 mm (Height × Width

× Depth)

For the biggest frame: < 10 msecIP frame transmission delay

For the smallest frame: < 1 msec

IP frame transmission loss ratio < 10-7

IP frame transmission error ratio < 10-6

Typical power consumption 21.22 W

Hot swappable Yes

• The conditions for testing the typical power consumption are: 50% users are activated (L0 mode).The profile 30a is configured. The transmission distance is 300 meters and the cable diameter is 0.4mm.

2.13 VSTDNP CardFunctions

The following are the VSTDNP card functions:

l Provides 16 VDSL2 user ports, implementing the access of VDSL2 service.l The maximum transmission distance is 2.5 km.l The downstream rate reaches up to 100 Mbps and the upstream rate reaches up to

100 Mbps.

VSTDNP Card Panel

Figure 2-30 shows VSTDNP card panel.

2-21

SJ-20101208153158-003|2010-12-15(R2.1) ZTE Proprietary and Confidential

ZXDSL 9806H Hardware Description

Figure 2-30 VSTDNP Card Panel

Sockets

There is one socket “USER” on VSTDNP card panel. The cable is connected to the users.

Features

Table 2-16 lists VSTDNP card features.

Table 2-16 VSTDNP Card Features

Item Feature

Dimensions 20.5 mm × 274 mm × 231.2 mm (Height × Width

× Depth)

For the biggest frame: < 10 msecIP frame transmission delay

For the smallest frame: < 1 msec

IP frame transmission loss ratio < 10-7

IP frame transmission error ratio < 10-6

Typical power consumption 22.3 W

Hot swappable Yes

• The conditions for testing the typical power consumption are: 50% users are activated (L0 mode).The profile 30a is configured. The transmission distance is 300 meters and the cable diameter is 0.4mm.

2.14 VSTEG CardFunctions

The following are the VSTEG card functions:

l Provides 24 VDSL2 user ports and POTS ports, implementing the access of VDSL2service.

l The maximum transmission distance is 2.5 km.l The downstream rate reaches up to 100 Mbps and the upstream rate reaches up to

60 Mbps.

Panel

Figure 2-31 shows VSTEG card panel.

2-22

SJ-20101208153158-003|2010-12-15(R2.1) ZTE Proprietary and Confidential

Chapter 2 System Hardware

Figure 2-31 VSTEG Card Panel

SocketsThere are two sockets on VSTEG card panel.

l USER: The cable is connected to the users.l PSTN: The cable is connected to the PSTN switch for transmitting voice signals.

FeaturesTable 2-17 lists VSTEG card features.

Table 2-17 VSTEG Card Features

Item Feature

Dimensions 20.5 mm × 274 mm × 231.2 mm (Height × Width

× Depth)

For the biggest frame: < 10 msecIP frame transmission delay

For the smallest frame: < 1 msec

IP frame transmission loss ratio < 10-7

IP frame transmission error ratio < 10-6

Typical power consumption 30.36 W

Hot swappable Yes

• The conditions for testing the typical power consumption are: 50% users are activated (L0 mode).The profile 17a is configured. The transmission distance is 750 meters and the cable diameter is 0.5mm.

2.15 VSTEH CardFunctionsThe following are the VSTEH card functions:

l Provides 24 VDSL2 user ports and POTS ports, implementing the access of VDSL2service.

l The maximum transmission distance is 2.5 km.l The downstream rate reaches up to 100 Mbps and the upstream rate reaches up to

60 Mbps.

PanelFigure 2-32 shows VSTEH card panel.

2-23

SJ-20101208153158-003|2010-12-15(R2.1) ZTE Proprietary and Confidential

ZXDSL 9806H Hardware Description

Figure 2-32 VSTEH Card Panel

Sockets

There are two sockets on VSTEH card panel.

l USER: The cable is connected to the users.l PSTN: The cable is connected to the PSTN switch for transmitting voice signals.

Features

Table 2-18 lists VSTEH card features.

Table 2-18 VSTEH Card Features

Item Feature

Dimensions 20.5 mm × 274 mm × 231.2 mm (Height × Width

× Depth)

For the biggest frame: < 10 msecIP frame transmission delay

For the smallest frame: < 1 msec

IP frame transmission loss ratio < 10-7

IP frame transmission error ratio < 10-6

Typical power consumption 30.36 W

Hot swappable Yes

• The conditions for testing the typical power consumption are: 50% users are activated (L0 mode).The profile 17a is configured. The transmission distance is 750 meters and the cable diameter is 0.5mm.

2.16 ETCA CardFunctions

The following are the ETCA card functions:

l Provides 16 Ethernet user ports, implementing the access of Ethernet broadbandservice.

l The ETCA card can reside in any slot for the user card .

Panel

Figure 2-33 shows ETCA card panel.

2-24

SJ-20101208153158-003|2010-12-15(R2.1) ZTE Proprietary and Confidential

Chapter 2 System Hardware

Figure 2-33 ETCA Card Panel

Interfaces

The ETCA card provides 16 FE electrical interfaces (RJ-45 Ethernet interfaces), numberingfrom 1 to 16.

Features

Table 2-19 lists ETCA card features.

Table 2-19 ETCA Card Features

Item Feature

Dimensions 20.5 mm × 274 mm × 231.2 mm (Height × Width

× Depth)

Maximum power consumption 6.8 W

Hot swappable Yes

2.17 ETCD CardFunctions

The following are the ETCD card functions:

l Provides 16 Ethernet user ports, implementing the access of Ethernet broadbandservice.

l The ETCD card can reside in any slot for the user card.

ETCD Card Panel

Figure 2-34 shows ETCD card panel.

Figure 2-34 ETCD Card Panel

Interfaces

The ETCD card provides 16 RJ-45 Ethernet interfaces.

l Interfaces from 1 to 2 are GE electrical interfaces.l Interfaces from 3 to 16 are FE electrical interfaces.

2-25

SJ-20101208153158-003|2010-12-15(R2.1) ZTE Proprietary and Confidential

ZXDSL 9806H Hardware Description

FeaturesTable 2-20 lists ETCD card features.

Table 2-20 ETCD Card Features

Item Feature

Dimensions 20.5 mm × 274 mm × 231.2 mm (Height × Width

× Depth)

Maximum power consumption 9.57 W

Hot swappable Yes

2.18 SSTEB CardFunctionsThe following are the SSTEB card functions:

l Provides 24 SHDSL user ports, implementing the access of SHDSL service.l The maximum transmission distance is 6 km.l The symmetric upstream and downstream rate ranges from 192 Kbps to 2312 Kbps.

PanelFigure 2-35 shows SSTEB card panel.

Figure 2-35 SSTEB Card Panel

SocketsThere is one socket “USER” on SSTEB card panel. The cable is connected to the users.

FeaturesTable 2-21 lists SSTEB card features.

Table 2-21 SSTEB Card Features

Item Feature

Dimensions 20.5 mm × 274 mm × 231.2 mm (Height × Width

× Depth)

For the biggest frame: < 10 msecIP frame transmission delay

For the smallest frame: < 1 msec

IP frame transmission loss ratio < 10-7

2-26

SJ-20101208153158-003|2010-12-15(R2.1) ZTE Proprietary and Confidential

Chapter 2 System Hardware

Item Feature

IP frame transmission error ratio < 10-6

Typical power consumption 24.22 W

Hot swappable Yes

• The conditions for testing the typical power consumption are: 50% users are activated (L0 mode).The transmission distance is 3000 meters and the cable diameter is 0.5 mm.

2.19 ATLC CardFunctions

The following are the ATLC card functions:

l Supports ringing and line test functions.l Provides 48 narrowband voice interfaces, implementing the access of 48 POTS users.

Panel

Figure 2-36 shows ATLC card panel.

Figure 2-36 ATLC Card Panel

Interfaces

There are two PSTN sockets on the ATLC card panel.

Features

Table 2-22 lists ATLC card features.

Table 2-22 ATLC Card Features

Item Feature

Dimensions 20.5 mm × 274 mm × 231.2 mm (Height × Width

× Depth)

Short distance: -Typical power consumption

Long distance: 27.94 W

Hot swappable Yes

• The condition for testing the typical power consumption is: 25% users hook off at the same time.

2-27

SJ-20101208153158-003|2010-12-15(R2.1) ZTE Proprietary and Confidential

ZXDSL 9806H Hardware Description

2.20 ATLA CardFunctionsThe following are the ATLA card functions:

l Supports ringing and line test functions.l Provides 24 narrowband voice interfaces, implementing the access of 24 POTS users.

PanelFigure 2-37 shows ATLA card panel.

Figure 2-37 ATLA Card Panel

InterfacesThere is one PSTN socket on the ATLA card panel.

FeaturesTable 2-23 lists ATLA card features.

Table 2-23 ATLA Card Features

Item Feature

Dimensions 20.5 mm × 274 mm × 231.2 mm (Height × Width

× Depth)

Short distance: -Typical power consumption

Long distance: 14.47 W

Hot swappable Yes

2.21 ATLCI CardFunctionsThe following are the ATLCI card functions:

l Supports ringing and line test functions.l Provides 48 narrowband voice interfaces, implementing the access of 48 POTS users.

PanelFigure 2-38 shows ATLCI card panel.

2-28

SJ-20101208153158-003|2010-12-15(R2.1) ZTE Proprietary and Confidential

Chapter 2 System Hardware

Figure 2-38 ATLCI Card Panel

InterfacesThere are two PSTN sockets on the ATLCI card panel.

FeaturesTable 2-24 lists ATLCI card features.

Table 2-24 ATLCI Card Features

Item Feature

Dimensions 20.5 mm × 274 mm × 231.2 mm (Height × Width

× Depth)

Short distance: 12.2 WTypical power consumption

Long distance: 21.32 W

Hot swappable Yes

• The condition for testing the typical power consumption is: 25% users hook off at the same time.

2.22 ATLCZ CardFunctionsThe following are the ATLCZ card functions:

l Supports ringing and line test functions.l Provides 48 narrowband voice interfaces, implementing the access of 48 POTS users.

PanelFigure 2-39 shows ATLCZ card panel.

Figure 2-39 ATLCZ Card Panel

InterfacesThere are two PSTN sockets on the ATLCZ card panel.

FeaturesTable 2-25 lists ATLCZ card features.

2-29

SJ-20101208153158-003|2010-12-15(R2.1) ZTE Proprietary and Confidential

ZXDSL 9806H Hardware Description

Table 2-25 ATLCZ Card Features

Item Feature

Dimensions 20.5 mm × 274 mm × 231.2 mm (Height × Width

× Depth)

Short distance: 16.6 WTypical power consumption

Long distance: 25.37 W

Hot swappable Yes

• The condition for testing the typical power consumption is: 25% users hook off at the same time.

2.23 ATLDI CardFunctionsThe following are the ATLDI card functions:

l Supports ringing and line test functions.l Provides 64 narrowband voice interfaces, implementing the access of 64 POTS users.

PanelFigure 2-40 shows ATLDI card panel.

Figure 2-40 ATLDI Card Panel

InterfacesThere are two PSTN sockets on the ATLDI card panel.

FeaturesTable 2-26 lists ATLDI card features.

Table 2-26 ATLDI Card Features

Item Feature

Dimensions 20.5 mm × 274 mm × 231.2 mm (Height × Width

× Depth)

Short distance: 19.6 WTypical power consumption

Long distance: 29.2 W

Hot swappable Yes

• The condition for testing the typical power consumption is: 25% users hook off at the same time.

2-30

SJ-20101208153158-003|2010-12-15(R2.1) ZTE Proprietary and Confidential

Chapter 2 System Hardware

2.24 Power CardsIntroductionThe ZXDSL 9806H uses two types of power card:

l PWDHE: The DC power supply cardl PWAHE: The AC power supply card

FunctionsThe following are the PWDHE card functions:

l -48V DC power supplyl Voltage range: -57 V DC to -40 V DCl Provides 3.3 V DC output and -48 V DC output

The following are the PWAHE card functions:

l 110 V/220 V AC power supplyl Voltage range: 90 V AC to 286 V ACl Provides 3.3 V DC output and -48 V DC outputl Provides DC backup electrical interface, supports -48 V DC or battery backup access

PanelsFigure 2-41 shows PWDHE card panel.

Figure 2-41 PWDHE Card Panel

Figure 2-42 shows PWAHE card panel.

Figure 2-42 PWAHE Card Panel

2-31

SJ-20101208153158-003|2010-12-15(R2.1) ZTE Proprietary and Confidential

ZXDSL 9806H Hardware Description

IndicatorsTable 2-27 lists PWDHE/PWAHE card indicators.

Table 2-27 PWDHE/PWAHE Card Indicators

Indicator Color Status Description

Green ON The device is running

normally.

RUN

Red ON Alarm

FeaturesTable 2-28 lists PWDHE/ PWAHE card features.

Table 2-28 PWDHE/PWAHE Card Features

Item Features

Dimensions 41.4 mm × 100 mm × 215 mm (Height × Width

× Depth)

PWDHE: 4.5 WMaximum power consumption

PWAHE: 4.5 W

2.25 BackplaneInterfacesThe backplane provides the following internal interfaces:

l Interfaces of the control and switching cardl Interfaces of the user cardl Interfaces of the power cardl Fan sockets

DimensionsDimensions: 320 mm × 84 mm (Height × Width)

2.26 Fan BoxFunctionsThe following are the fan box functions:

l The fan box resides on the left side of shelf. The air exhausts from the fan box andthe shelf temperature lowers.

l The built-in fan card tests the fan operation and implements other fan control functions.

2-32

SJ-20101208153158-003|2010-12-15(R2.1) ZTE Proprietary and Confidential

Chapter 2 System Hardware

Features

Table 2-29 lists the fan box features.

Table 2-29 Fan Box Features

Item Feature

Dimensions (excluding the handle) 85 mm × 36 mm × 255 mm (Height × Width ×

Depth)

Rotation speed l Maximum speed (indoor): 3000 rpm

l Maximum speed (outdoor): 5000 rpm

Power consumption 4 W

Hot swappable Yes

2-33

SJ-20101208153158-003|2010-12-15(R2.1) ZTE Proprietary and Confidential

ZXDSL 9806H Hardware Description

This page intentionally left blank.

2-34

SJ-20101208153158-003|2010-12-15(R2.1) ZTE Proprietary and Confidential

FiguresFigure 2-1 Shelf Structure (Front View) ..................................................................... 2-5

Figure 2-2 Shelf Structure (Side View) ...................................................................... 2-5

Figure 2-3 Full Shelf Configuration............................................................................ 2-6

Figure 2-4 SCCB Card Panel (2 FE Electrical Interfaces).......................................... 2-7

Figure 2-5 SCCB Card Panel (1 FE Electrical Interface + 1 FE OpticalInterface) ............................................................................................... 2-7

Figure 2-6 SCCB Card Panel (2 FE Optical Interfaces) ............................................. 2-7

Figure 2-7 SCCB Card Panel (2 GE Electrical Interfaces) ......................................... 2-7

Figure 2-8 SCCB Card Panel (1 GE Electrical Interface + 1 GE OpticalInterface) ............................................................................................... 2-7

Figure 2-9 SCCB Card Panel (2 GE Optical Interfaces) ............................................ 2-8

Figure 2-10 SCCB Card Panel (1 GPON Interface)................................................... 2-8

Figure 2-11 SCCB Card Panel (1 EPON Interface) ................................................... 2-8

Figure 2-12 SCCBB Card Panel (2 FE Electrical Interfaces) ................................... 2-10

Figure 2-13 SCCBK Card Panel (1 FE Electrical Interface + 1 FE OpticalInterface) ............................................................................................. 2-10

Figure 2-14 SCCBK Card Panel (2 FE Optical Interfaces)....................................... 2-10

Figure 2-15 SCCBK Card Panel (2 GE Electrical Interfaces)................................... 2-10

Figure 2-16 SCCBK Card Panel (1 GE Electrical Interface + 1 GE OpticalInterface) ............................................................................................. 2-11

Figure 2-17 SCCBK Card Panel (2 GE Optical Interfaces) ...................................... 2-11

Figure 2-18 SCCBK Card Panel (1 GPON Interface) .............................................. 2-11

Figure 2-19 SCCBK Card Panel (2 GPON Interfaces)............................................. 2-11

Figure 2-20 SCCBK Card Panel (1 EPON Interface)............................................... 2-11

Figure 2-21 SCCBK Card Panel (1 EPON Interface + 1 GE ElectricalInterface) ............................................................................................. 2-12

Figure 2-22 SCCBK Card Panel (2 EPON Interfaces) ............................................. 2-12

Figure 2-23 ASTEB Card Panel .............................................................................. 2-15

Figure 2-24 ASTDE Card Panel .............................................................................. 2-16

Figure 2-25 ASTEC Card Panel .............................................................................. 2-17

Figure 2-26 ASTGC Panel ...................................................................................... 2-18

Figure 2-27 VSTDC Card Panel.............................................................................. 2-19

Figure 2-28 VSTDG Card Panel.............................................................................. 2-20

I

ZXDSL 9806H Hardware Description

Figure 2-29 VSTDN Card Panel.............................................................................. 2-21

Figure 2-30 VSTDNP Card Panel ........................................................................... 2-22

Figure 2-31 VSTEG Card Panel.............................................................................. 2-23

Figure 2-32 VSTEH Card Panel .............................................................................. 2-24

Figure 2-33 ETCA Card Panel ................................................................................ 2-25

Figure 2-34 ETCD Card Panel ................................................................................ 2-25

Figure 2-35 SSTEB Card Panel .............................................................................. 2-26

Figure 2-36 ATLC Card Panel ................................................................................. 2-27

Figure 2-37 ATLA Card Panel ................................................................................. 2-28

Figure 2-38 ATLCI Card Panel ................................................................................ 2-29

Figure 2-39 ATLCZ Card Panel............................................................................... 2-29

Figure 2-40 ATLDI Card Panel ................................................................................ 2-30

Figure 2-41 PWDHE Card Panel............................................................................. 2-31

Figure 2-42 PWAHE Card Panel ............................................................................. 2-31

II

TablesTable 1-1 System Components ................................................................................. 1-1

Table 1-2 ZXDSL 9806H Performance Specifications ............................................... 1-1

Table 2-1 ZXDSL 9806H Cards................................................................................. 2-2

Table 2-2 SCCB Card Interfaces ............................................................................... 2-8

Table 2-3 SCCB Card Indicators ............................................................................... 2-9

Table 2-4 SCCB Card Features................................................................................. 2-9

Table 2-5 SCCBK Card Interfaces........................................................................... 2-12

Table 2-6 SCCBK Card Indicators........................................................................... 2-12

Table 2-7 SCCBK Card Features ............................................................................ 2-13

Table 2-8 Daughter Card Interfaces ........................................................................ 2-13

Table 2-9 ASTEB Card Features............................................................................. 2-15

Table 2-10 ASTDE Card Features........................................................................... 2-16

Table 2-11 ASTEC Card Features........................................................................... 2-17

Table 2-12 ASTGC Card Features .......................................................................... 2-18

Table 2-13 VSTDC Card Features .......................................................................... 2-19

Table 2-14 VSTDG Card Features .......................................................................... 2-20

Table 2-15 VSTDN Card Features .......................................................................... 2-21

Table 2-16 VSTDNP Card Features ........................................................................ 2-22

Table 2-17 VSTEG Card Features .......................................................................... 2-23

Table 2-18 VSTEH Card Features........................................................................... 2-24

Table 2-19 ETCA Card Features ............................................................................. 2-25

Table 2-20 ETCD Card Features............................................................................. 2-26

Table 2-21 SSTEB Card Features........................................................................... 2-26

Table 2-22 ATLC Card Features.............................................................................. 2-27

Table 2-23 ATLA Card Features.............................................................................. 2-28

Table 2-24 ATLCI Card Features............................................................................. 2-29

Table 2-25 ATLCZ Card Features ........................................................................... 2-30

Table 2-26 ATLDI Card Features............................................................................. 2-30

Table 2-27 PWDHE/PWAHE Card Indicators .......................................................... 2-32

Table 2-28 PWDHE/PWAHE Card Features............................................................ 2-32

Table 2-29 Fan Box Features.................................................................................. 2-33

III

Tables

This page intentionally left blank.

IndexAApplication Scenarios........................... 1-1

BBackplane .......................................... 2-32

DDaughter Cards.................................. 2-13

FFan Box ............................................. 2-32

IInterfaces ............................................. 1-2

OOverview.............................................. 2-1

PPerformance Specifications.................. 1-1Power Supply Requirements ................ 1-2

SSCCB Card .......................................... 2-6SCCBK Card........................................ 2-9Shelf..................................................... 2-5System Components ............................ 1-1

V

Index

This page intentionally left blank.

GlossaryAC- Access Control

ADSL- Asymmetric Digital Subscriber Loop

ADSL- Asymmetric Digital Subscriber Line

ATM- Asynchronous Transfer Mode

BRI- Basic Rate Interface

DC- Direct Current

EPON- Ethernet Passive Optical Network

FE- Fast Ethernet

GE- Gigabit Ethernet

GPON- Gigabit Passive Optical Network

IP- Internet Protocol

ISDN- Integrated Services Digital Network

ONT- Optical Network Terminal

POTS- Plain Old Telephone Service

PRI- Primary Rate Interface

PSTN- Public Switched Telephone Network

RTP- Real-time Transport Protocol

VII

ZXDSL 9806H Hardware Description

SHDSL- Single-pair High Digital Subscriber Line

TDM- Time Division Multiplexing

UDP- User Datagram Protocol

VDSL- Very High Speed Digital Subscriber Line

VDSL2- Very High Bit Rate Digital Subscriber Line 2

VoIP- Voice over Internet Protocol

VIII