WOS - OUTPUT FEATURE ACTIVATION STATUSFunctionUse this command to print out the activation statuses of all delivered features located in the FIFILE. If the parameter's value is TRUE, the activation status in the output is DEACTIVE or ACTIVE.In the BSC network elements (BSC2i, BSCi, and Flexi BSC product family, which includes BSC3i 660, BSC3i 1000/2000 and Flexi BSC), all FIFILE parameters are shown in the output. The states of unused parameters, that is, those with value FALSE, are shown as NOT IN USE. The states of used parameters are shown as ACTIVATED or DEACTIVATED, depending on the activation status of each parameter.Parametersparameter class , parameter number ;Syntax

SyntaxWOS:[] | [,...];

Parameter explanations

Parameter explanationsparameter classThis parameter defines the numerical identifier of the PRFILE parameter class you want to interrogate. The value is an integer in the range of 0-254.The parameter is not obligatory. If you give the command without parameters, or with the decimal number 255, all permissible parameters in the FIFILE are put out.parameter numberThis parameter defines the numerical identifier of the FIFILE parameter you want to interrogate. It specifies the individual parameters to be output in a certain parameter class. The value is an integer in the range of 0-9999. Grouping characters '&' and '&&' can be used in the command.The parameter can be used only if the parameter class is defined.The parameter is not obligatory. If no parameter number is given in the command, or the decimal number 10000 is given, the command puts out all parameters in the selected class.

Examples

Examples1.Interrogate the data on all parameters in the FIFILE.ZWOS;2.Interrogate the data on all parameters in parameter class 1.ZWOS:1;3.Interrogate in BSC the data on all parameters in class 2.ZWOS:2;4.Interrogate the data on parameters between 95 and 99 in parameter class 1.ZWOS:1,95&&99;

Execution printouts

Semantic error messages

Semantic error messagesIf an error occurs, the system outputs a general MML semantic error message.

Execution error messages

Execution error messagesIf an error occurs, the system outputs a general MML execution error message.