Zublin

titel

Licht, Automatik und Sicherheit

PräsenzmelderBewegungsmelderSensorleuchten

InnovationBidirektional

2008 / 2009

LightAutomatic

and Security

Presence DetectorsMotion Detectors

Sensor Lights

Swiss Garde IR

Important technical terms Page

– high-performance relay for electronic control gear 64

– Bidirectional 19/62

– Interactive 19/62

– Close-up detection area 56

– Internal detection area 57

– Bidi module 21

– Bidi pad 21

– Bidi set 21

– Bidi module + Bidi pad = Bidi set 21

Abbreviations

MD = Motion detector

SG = Swiss Garde

IG = Infra Garde

Internal detection area: 0–3mExternal detection area: 3–8m

Close-up area: 0–5mMedium area: 5–10mRemote area: 10–16m

The present 2008 catalogue has been specially desi-gned for electrical engineers, planners and electricians.

Along with detailed technical data, recommendationsand practical examples for the planning and installationare provided also. Out of more than 100 different pro-ducts that are divided into two price classes, you willfind the right device for any application with the aid ofthis catalogue.

Please consult our experts for your projects and benefitfrom our 20 years’ experience!

We look forward to receiving your ’feedback’, as yoursatisfaction is paramount to us.

Detection areas

In this catalogue:

Word novelty: Swiss Garde MZ5000 pp. 19–21+bidirectional, interactive pp. 62–63

Novelties: Swiss Garde presence detectors pp. 5– 8/15

Swiss Garde 3000 IR p. 13

Swiss Garde UP IR pp. 15–17

Swiss Garde 360 HF p. 22

www.zublin.de

3 year warranty !

Swiss Garde

Züblin Elektro GmbH

3 year warranty !

All Züblin products are CE certified / approved by the German Technical Inspection Agency and issued with a minimum 3 year warranty!

Tarif

Table of contentswww.zublin.de

Swiss Garde 2–22

Survey 2–3

PIR hand-held transmitter 4

Presence detectors 5–8 / 15

Motion detectors 9–14 / 16–22

Infra Garde 23–32

Survey 23

Motion detectors 24–30

Z-radio 31

Camera motion detectors 32

Sensor lights and floodlights 33–54

Survey 34–35

HF sensor ceiling lights 36–39

Stainless steel sensor lights 40–44

Sensor lights 45–46 /49–50

Sensor post lights 41–43 / 46–48

Sensor floodlights 48 / 51–52

Floodlights and lights without sensor 53–54

1

Diagrams, installation examples,accessories 55–72

Swiss Garde 56–63

Miscellaneous 64–70

Accessories 67

Fax form 71

Page

Swiss Garde Presence and Motion Detectors Survey

2 Operating instructions under www.zublin.de 3

Survey

Swiss Garde320 HF Concealed

Item no 2735

Presence detectors pp. 5–8Swiss Garde

MZ 5000 pp. 19–22BidirectionalHF / HF electronic equipmentfor signal processingSwiss Garde

Motion detectors pp. 9–12360°, ceiling installationSwiss Garde

Motion detectors pp. 13–14Wall installationSwiss Garde

Motion detectors pp. 17–18Wall installationSwiss Garde

1 2 3 4 5 6 7 89

SG 360 PremiumSG 360 Premium

SG 360

Plus KI

approx. 21 m

approx. 10 m

Installation examples Pulse GeneratorItem no 3390

Connection diagrams

Connection pp. 55–69diagrams Installation examplesAccessories

Swiss Garde300 D IR

Item no 25290Item no 25320

Swiss Garde180 IR Concealed


Swiss Garde360 Presence AP

Item no 25080

Swiss Garde360 Presence Concealed

Item no 25070

Swiss Garde360 Presence KNX/EIB

Item no 25020

Swiss GardeMZ 5000

Item no 26350

Swiss GardeMZ 5000 kit

Item no 26350a

Swiss Garde360 HF

Item no 27370

HF Sensor 360 EB

Item no 2736

Swiss Garde3000 IR


Swiss Garde3000 IR Concealed


Swiss Garde290 IR


L1N

NL

Wechselschalter Busch-Wächter® Leuchte

Motion detectors pp. 15–16Presence detectorsWall installation,concealed/concealed IRSwiss Garde

Connection diagrams pp. 56–70Installation examplesAccessories

Swiss Garde360 Presence Mini

Item no 25480

3 year warranty !

Swiss Garde

M. Züblin AG

3 year warranty !

P-IR hand-held transmitter optional Item no 25320PM remote control included

P-IR hand-held transmitter optional Item no 25320

P-IR hand-held transmitter optional Item no 25320P-IR hand-held transmitter optional Item no 25320

Swiss Garde360 WM


Swiss Garde360 Premium Item no 25050Item no 25320

Swiss Garde 360 Premium concealed


Swiss Garde360 Plus


Swiss Garde360 Presence Easy


Swiss Garde300 Presence Concealed


4 5

The hand-held transmitters

Description Item no Price in Euro

PIR hand-held transmitter 25320 20.00

Mini hand-held transmitter 25310 15.00

Light offThe motion detector is switched off permanently.Reactivate with the ’AUTO’ button.

Holiday buttonIn holiday mode, the light is switched on every day at dawn for4 hours. Deactivate with the ’AUTO’ button.

LOCKPushbutton functions of the remote control are locked.Reactivation through pressing again.

RESETActivation of default values of the motion detector(Sens/Time/Lux: 3/10/10)

SENS The reach of the sensor can be set at 4 different values. The set value is illuminated on pressing the ’Play’ button.

TIME Different follow-up times and the short duration pulse functioncan be selected and read here. Illumination on pressing the’Play’ button.

LUX 4 different lux values can be set and read here.

Mini hand-held transmitterNominal voltage: DC 3 VBattery: CR 2025IR reach: approx. 6 mDimensions: 30 mm x 45 mm x 10 mmNote: The end user can switch the light on and off with

the mini hand-held transmitter.

Wand fixiert.AUTO: Sensor functionON: Light ON for 6 hours *OFF: Light OFF for 6 hours *

* after that back to the sensor function

SENDSending and storage of all set parameters in the motion detector (Sens, Time, Lux).

CURSORChoice of different parameters.

O.K Sending and storage of all set parameters in the motion detector (Sens, Time, Lux).

PLAYDisplay and check of the set parameters on the hand-held transmitter.

ON/OFFLight on or off for 6 hours each time. After that automatic backspacing to the ’Auto’ function.

AUTOAutomatic function as per settings of the motion detector.

TESTTesting of the motion detector independently of the ambient light value.

Impuls PauseWith the pulse pause button you select the pause time between 2 pulses: 20 secs or 60 secs for optimum activation of a time relay or machine.

Hand-held transmitter Swiss Garde

The Swiss Garde 360 Presence Model

Description Item no Price Euro

Swiss Garde 360 Presence concealed white 25070 125.00

Swiss Garde 360 Presence exposed white 25080 130.00

PM remote control 25090 20.00

Exposed frame 25440 15.00

Safety guard 3331 15.00

Presence detector Swiss Garde

Mounting height Sitting persons Ø Walking persons ØDiameter Diameter

2.0 m 5 m 12 m2.5 m 6 m 14 m3.0 m 7 m 16 m3.5 m 8 m ** 18 m4.0 m 9 m ** 20 m5.0 m

** Bei grösserem Erfassungsbereich muss der Zeitregler auf Maximum gestellt werden!

Your advantages

• Presence detector with large 16 m detection area• 2 independent relays for lighting and heating /

ventilation / air conditioning• Integrated short duration pulse function for the activation

of staircase switches, gongs, PLC, etc.• Remote controllable via IR remote control ON/OFF/AUTO

as well as lux value memory and operational mode• Additional pushbutton input for manual switching• Programmable as fully automatic or semiautomatic machine• Ideal for offices, schoolhouses, meeting rooms, etc.• Advantageous connecting and assembly system for quick

and easy installation• New high-performance relay with high electronic control

gear switching capacity

Concealed version With exposed frame

PIR hand-held transmitterNominal voltage: DC 3 VBattery: CR 2025IR reach: approx. 6 mDimensions: 55 mm x 85 mm x 10 mmNote: In case of manual setting of the motion detector all

parameters set via hand-held transmitter will be deleted.

Your advantages

• Setting of all LUX/SENS/time parameters manually or via PIR hand-held transmitter

• ‘Send’ key for transmission of all parameter values at the push of a button

• Buttons with optical and acoustic confirmation

• Cursor keys for simple setting of desired values

• Memory function for all set parameters

Programmable as semiautomatic

or fully automatic machine

Swiss Garde 360 PresenceFor the detection of small movements in offices and lounges

Nominal voltage: 230 Volt /50 HzDetection area: 360° / 16 mSwitching capacity relay 1: 2300 Watt /10A ohmic (cos ϕ 1.0)

1150 Watt / 5 A inductive (cos ϕ 0.5)1-light electronic control gear: 30 x 18W, 25 x 36W or 20 x 58 W max2-light electronic control gear: 20 x (2 x18 W), 15 x (2 x 36 W) or 10 x (2 x 58 W) maxRelays 2: potential-free max 5 A 230V/AC–30V/DC

Mounting height: approx. 2–4 mTwilight controller: 5–1000 luxTime controller: 2, 5, 10, 15 mins or pulse 1 secProtection class: IP 20 indoor mounting / class IITemperature: 0° C to + 40° CDimensions exposed: 85 mm x 85 mm, 75 mm depthDimensions concealed: 86 mm x 86 mm, 35 mm depth3 year warranty

Cost savings with intelligent light and heating / ventilation / air conditioning management

The Swiss Garde Presence ensures optimum energy managementwith 2 independent relays. Relay no 1 connects and controls thelighting depending on persons present and on brightness. Relay no 2 connects heating, ventilation or gongs, etc., potential-free andbrightness-independently. Both relays can be set to pulse functionor follow-up times via the time controller. According to requirements, the light (relay no 1) can be completelyswitched on and again off via the remote control provided. The automatic can thus be disconnected for lectures or on leaving theroom, and be connected again later on, according to requirements.With the predefined reach and 2-channel system, individual devicescan also be controlled via hand-held transmitter selectively. TheSwiss Garde presence detector can be applied as a fully automaticmachine with a make contact switch or as a semiautomatic ma-chine with a standard light switch. This unique technology allowssimple retrofitting of existing lighting systems!

included

Side view

Top view

Front approach = not sensitive (distance–50%)

Sidewise approach = sensitive

max 16m

max 16m

max

16

m

Presence: 6 m

Accessories optional

Exposed framefor Swiss Garde 360 Presence

Item no 25440

PM remote controlON: light completely On for 6 hrs

(then back to auto function)ON: Relay 2 press 5 secs=fully automatic machineOFF: light completely Off for 6 hrs

(then back to auto function)OFF: Relay 2 press 5 secs=semiautomatic machineAuto: standard presence detector functionLearn: store current light value

Item no 25090

Safety guardDevice protection against balls and vandalism.

Dimensions: 150 mm Ø x 80 mmItem no 3331

Further accessories see p. 67

Operating instructions under www.zublin.de

PM remote controlON: light completely On for 6 hrs

(then back to auto function)ON: Relay 2 press 5 secs=fully automatic machineOFF: light completely Off for 6 hrs

(then back to auto function)OFF: Relay 2 press 5 secs=semiautomatic machineAuto: standard presence detector functionLearn: store current light value

Item no 25090

Your advantages

• Passive infrared (PIR) presence detector for ceiling installation with EIB interface

• 4 pyrodetectors and a high-resolution lens detect smallest movements

• Fully automatic or semiautomatic machine: As a fully automatic machine, the lighting is automatically switched on and off, depending on presence and brightness. As a semiautomatic machine, the switch-on must always be carried out manually via a KNX pushbutton. Switich-off takes place automatically.

• A brightness sensor allows a reflected meter with linear output. A built-on optical filter is adjusted to the profile of the human eye.

• The light sensor can trigger in all operating modes a 0- or 1-frame, respectively, on exceeding or falling short of, respectively, a configurable lux value. The metered light value in lux can additionally be read via the bus.

6 7

Swiss GardePresence detector Swiss Garde

The Swiss Garde 360 Presence KNX/EIB model


Swiss Garde 360 Presence KNX/EIB 25020 250.00

PM remote control 25090 20.00



Spring clip adaptor 25410 10.00

Side view

Top view

Front detection =not sensitive Reach -50%

Detection tangential= sensitive


Exposed framefor all Swiss Garde presence detectors.

Item no 25440

Swiss Garde 360 PresenceKNX/EIBPresence detector with KNX/EIB interface.

Nominal voltage: 24V DC (21V DC – 30V DC)Power input: 0.5 WDetection area: 360°Reach: 16 m, presence: 6 mPIR sensors: 4 pyrodetectors for large detection areaSensitivity: adjustable via ETS3: low – standard – highMounting height: 2 m–4 mSettings: all settings are via ETS3

with remote adjustabilityReflected meter: brightness sensor with optical filter and linear outputLight value: light value in lux readable via BUS Switching criteria: movement and brightnessKNX connection: double-pole bus terminal, with 4 plug terminals

each for wires of Ø 0.6 to 0.8 mm2

IR remote control: 2 channels CH1, CH2Function of remote control: ON: light On, OFF: light Off, AUTO: Automatic.

Release time configurableReach of remote control by infra-red equipment: max 6 m (with free visibility)Battery: 1x 3V CR 2032Protection class: IP 20 indoor mounting / class IIWorking temperature range: 0 to +40 °CDimensions of detector: 86 mm x 86 mm x 35 mmDimensions of remote con-trol by infra-red equipment: 65 mm x 28 mm x 7,5 mm3 year warranty

Properties/Assembly

Newly available is the Swiss Garde 360 presence detectorKNX/EIB with EIB interface for application within building systemengineering. With 4 pyrodetectors and a high-resolution lens, itdetects the smallest movements and evaluates each signal withfirst class electronics operated via a microcontroller. The followingoperating modes are programmable with the use of our presencedetector application software:

Light control channel: Following detection of a movement, the detectorsends a 1-frame or a configurable dimming value (0…100%). In case of absence of movement the presence detector sends a 0-frame or a secondconfigurable dimming value (0…100%) on expiry of a configurable follow-up time. Heating / air conditioning / ventilation control channel: thisoutput switches only after checking 2 to 20 consecutive observation win-dows of equal length, in each one of which at least one movement hasbeen detected. Master/slave mode: can be configured by setting the parameters via ETS3.With the optional IR remote control, the lighting channel can be switchedon or off unconditionally. After expiry of the configurable release time or by activating the AUTO button, the detector returns to its normal state.

NEW 08

included

Your advantages

• Motion detector with large detection area up to max 24 m diameter

• Settings of all parameters LUX/SENS/Time manually or via PIR hand-held transmitter

• Integrated short duration pulse function for the activation of staircase switches or gongs, etc.

• Short duration pulse pause time adjustable via PIR remote control to 20 or 60 secs

• Larger pulse pause time prevents switching noises • Additional pushbutton input for manual switching• Ideal for offices, schoolrooms, warehouses, corridors, etc.• Saves energy costs• New high-performance relay with high electronic control


The Swiss Garde 360 Presence Easy Concealed Model


Swiss Garde 360 Presence Easy 25470 98.00




Swiss Garde 360 Presence EasyVersion 360° with large 24 m detection area for concealed ceiling installation, 1-channel

Nominal voltage: 230 V / 50 HzSwitching capacity: 2300 Watt /10A ohmic (cos ϕ 1.0)

1150 Watt / 5 A inductive (cos ϕ 0.5)1-light electronic control gear: 30 x18W, 25 x 36 W or 20 x 58 W max2-light electronic control gear: 20 x (2 x18 W), 15 x (2 x 36 W) or 10 x (2 x 58 W) max

Detection area: 360°Reach: 12 m presence, max 24 m diameterMounting height: approx. 2 m–6 mTwilight controller: 5–2000 luxTime controller: 0.7 secs short duration pulse or 10 secs to 12 minsProtection class: IP 20 indoor mounting / class IITemperature range: 0° C to + 40° CDimensions: 86 mm x 86 mm x 35 mm 3 year warranty

Properties/Assembly

The Swiss Garde 360 Presence Easy is a 1-channel presencedetector detecting the smallest movements with 4 pyrodetec-tors. It is suited for offices, schoolrooms, lounges and corridors,etc., and features a large detection area with 16 m diameter aswell as an integrated short duration pulse function. The high-performance relay allows the direct connection of fluorescentlights, and the high electronic control gear switching capacityensures a long life cycle. The Swiss Garde Presence Easy is remote controllable with the PIR hand-held transmitter, with justa push of the button to set the preferred parameter values.

NEW 08

optional

max. 16m

Side view

Top view


max 24 m

max 24 m

max

24

m

90 mm


2.0 m 3 m 12 m2.5 m 4 m 14 m3.0 m 5 m 16 m3.5 m 6 m 18 m4.0 m 20 m

max 12 m presence

max 24 m motion



Mini hand-held transmitterAUTO: sensor function

ON: light ON for 6 hours *

OFF: light OFF for 6 hours *

* then back again to sensor functionItem no 25310

Spring clip adaptorFor simple mounting without concealed socket. Dimensions: 57.5 mm x 57.5 mm

Item no 25410

Sending of the set parameters

Cursor for selecting the parameters

Storage of the selected parameters

Playing back the set parameters

Trial run

Setting of the pause time between 2 pulses

Holiday programs

Deactivation of the key function Item no 25320 see p.4

PIR hand-held transmitter



Präsenzmelder Swiss Garde

Your advantages

• Sensor with smallest dimensions (diameter sensor head: 37 mm)

• Ceiling installation device with spring clips for easy and quick assembly

• All parameters remote controllable via PIR hand-held transmitter !

• Time controller with integrated short duration pulse function, reach and light controller

• Modular pins between power supply box and sensor• Advantageous connecting and assembly system for easy

and quick installation

8

The Swiss Garde 360 Presence Mini Model


Swiss Garde 360 Presence Mini 25480 65.00



Presence detector Swiss Garde

Swiss Garde 360 Presence MiniSensor with smallest dimensions. Remote controllable with PIR hand-held transmitter.



Detection area: approx. 360° / 6 – 8 m (installed height 2.5 – 3.5m)Time controller: pulse, approx. 10, 30 secs, 1, 2, 6, 8, 12 minsTwilight controller: 10, 50, 150, 2000 luxTemperature range: -20 °C to + 55 °CProtection class: IP 20 (indoor mounting), class II,

Technical Inspection Agency SouthDimensions: sensor 37 Ø x 32 mm,Hole: 31 – 34 mmRelay unit: 127 x 23 x 23 mm3 year warranty

Cost savings with intelligent light management

The Swiss Garde Presence Mini ensures optimum energy man-agement. The sensor head is small and inconspicuous. It can befastened in the ceiling quickly and easily by means of the springclips provided. All parameters can be set via remote control atthe push of a button! The follow-up time can be set to pulsefunction or 1–12 mins via the time controller. The light connectedto relay no 1 is switched off automatically as soon as the naturalbrightness exeeds the value set in the device.The Swiss GardePresence monitors rooms up to 60m2, and with an additionalsensor up to 120 m2. Switched with 4 systems in parallel, up to500 m2 are covered.

Side view

Top view

9

Motion Detector Swiss Garde


2.0 m 3 m 5 m2.5 m 4 m 6 m3.0 m 5 m 7 m3.5 m 6 m 8 m4.0 m 10 m

Swiss Garde 360 PremiumVersion 360° with extra large detection area,waterproof for indoor and outdoor mounting



Detection area: 360°Reach: max 30 mMounting height: approx. 2 m– 4 mTwilight controller: 10–2000 luxTime controller: 10 secs to 12 mins short duration pulse 0.7 secsProtection class: IP 44 indoor and outdoor mounting / class IITemperature range: -20°C to +55°CDimensions: 125 mm diameter, height: 75 mm 3 year warranty

Properties/Assembly

The motion detector Swiss Garde 360 Premium is suited for large-area rooms, such as underground car parks, for which a splash-proof motion detector with a large detection area is desired. Dueto the adjustable ‘sens’ reach, the detection area adjusted opti-mally.

For larger installations we recommend the activation of the shortduration pulse function and to activate a time relay or a staircaseswitch.

The Swiss Garde 360 Premium Model


Swiss Garde 360 Premium white 25050 98.00




1 2 3 4 5 6 7 89


SG 360

Plus KI

approx. 21 m

approx. 10 m

Side view

Top view

Front approach =not sensitive (distance–50%)


max 30m






Trial run


Holiday programs






* then back again to sensor function

Item no 25310






Trial run


Holiday programs







Item no 25310

Safety guardDevice protection against balls and vandalism.

Dimensions: 150 mm Ø x 80 mmItem no 3331

Mounting height Sitting persons Ø Diameter

2.0 m 20 m2.5 m 24 m3.0 m 26 m3.5 m 28 m4.0 m 30 m

NEW 08


Sidewise approach= sensitive

max 30m

max

30

m


optionaloptional

3.2

9

32

1.5

5 10

37

37

127

450

23

23

Hole: 31– 34 mm

Your advantages

• Motion detector with large detection area up to max 30 m diameter




• Larger pulse pause time prevents switching noises • Ideal for underground car parks, staircases, warehouses,

corridors, etc.• Saves energy costs• New high-performance relay with high electronic control




10 11

Swiss Garde

max. 16m

Side view

Top view



max 16m

Swiss Garde 360 PlusVersion 360° with large detection area for concealed ceiling installation


1150 Watt / 5 A inductive (cos ϕ 0.5)1-light electronic control gear: 30 x18 W, 25 x 36 W or 20 x 58 W max2-light electronic control gear: 20 x (2 x18 W), 15 x (2 x 36 W) or 10 x (2 x 58 W) max

Detection area: 360°Reach: 6 m to 8 m, max 16 m diameterMounting height: approx. 2 m – 4 mTwilight controller: 10 – 2000 luxTime controller: 0.7 secs short duration pulse or 10 secs to 12 minsProtection class: IP 20 indoor mounting / class IITemperature range: 0° C to + 40° CDimensions: 86 mm x 86 mm x 35 mm 3 year warranty

Properties/Assembly

The motion detector Swiss Garde 360 Plus is suited for concealedceiling installation in larger rooms, such as underground car parks,staircases and corridors, for which a detection area of up to 16 mis desired. It is the ‘favourite’ of architects preferring a discrete,hardly visible motion detector. The detection area can be adjustedoptimally by means of the adjustable reach. We recommend toswitch in parallel up to 4 Swiss Garde 360 Plus.

Short duration pulse function

For larger installations, such as in schoolhouses, staircases,warehouses, etc., we recommend to apply the short durationpulse function and to energise the light via a time relay.

The Swiss Garde 360 Plus Models


Swiss Garde 360 Plus white 25000 80.00

Swiss Garde 360 Plus black 25190 90.00






Your advantages

• Discrete and flat design, special colours on request!• Motion detector with large detection area up to

max 16 m diameter• Settings of all parameters LUX/SENS/TIME manually or

via PIR hand-held transmitter• Integrated short duration pulse function for the activation

of staircase switches or gongs, etc.• Short duration pulse pause time adjustable via PIR remote

control to 20 or 60 secs• Larger pulse pause time prevents switching noises• Additional pushbutton input for manual switching• Ideal for underground car parks, staircases, warehouses,

corridors, etc.• Saves energy costs• New high-performance relay with high electronic control







Spring clip adaptorFor simple mounting without concealed socket.Dimensions: 57.5 mm x 57.5 mm

Item no 25410

The Swiss Garde 360 Premium Concealed Models


Swiss Garde 360 Premium concealed 25060 98.00





Side view

Top view



max 30m

The application ofthree IR sensors withLED display allowsoptimal functions.

Your advantages

• Motion detector with large detection area up to 30 m diameter!• Settings of all parameters LUX/SENS/TIME manually or via

PIR hand-held transmitter• Integrated short duration pulse function for the activation of

staircase switches or gongs, etc.• Short duration pulse pause time adjustable via IR remote

control to 20 or 60 secs• Larger pulse pause time prevents switching noises • New performance relay with high electronic control gear

switching capacity• Ideal for underground car parks, staircases, warehouses,

corridors, etc. - saves energy costs• New high-performance relay with high electronic control








Item no 25410





Trial run


Holiday programs



Mounting height Sitting persons ØDiameter

2.0 m 20 m2.5 m 24 m3.0 m 26 m3.5 m 28 m4.0 m 30 m5.0 m 32 m

** For larger detection areas the time controller must be set to maximum!





Trial run


Holiday programs



max 30m

max

30

m

Exposed frameFor exposed installation on concrete ceilings, etc.

Item no 25400

max 16m

max

16

m

optional optional

Exposed frameSwiss Garde 360 Pluswith exposed frame

Item no 25400

Flat, discrete desing and large detection area.


Swiss Garde 360 Premium ConcealedVersion 360° with large 24 m detection area for concealed ceiling installation



Detection area: 360°Reach: 6-16 m, max 30 m diameterMounting height: approx. 2 m – 4 mTwilight controller: 10 – 2000 luxTime controller: 0.7 secs short duration pulse or 10 secs to 12 minsProtection class: IP 20 indoor mounting / class IITemperature range: 0° C to + 40° CDimensions: 86 mm x 86 mm x 35 mm 3 year warranty

Properties/Assembly

The motion detector Swiss Garde 360 Premium Concealed is suited forconcealed ceiling installation in larger rooms, such as offices and corri-dors, for which a detection area up to 30 m is desired. The detectionarea can be adjusted optimally by means of the adjustable reach. Werecommend to connect in parallel up to 4 Swiss Gard 360 Premiums.


For larger installations, such as in schoolhouses, staircases, ware-houses, etc., we recommend the application of the short durationpulse function and to energise the light via a time relay.

13

The Swiss Garde 3000 IR Model


Swiss Garde 3000 IR Concealed+Exposed 26400 120.00



Swiss Garde

optional


12

Your advantages

• Settings of all parameters LUX/SENS/Time manually or via IR hand-held transmitter

• 24 V version for PLC and feeble current installations• large detection area of max 16 m diameter with 3 Top-

quality pyrodetectors• Device can be installed into a standard switch box• Adjustable ‘SENS’ detection reach• Elegant, discrete, motion detector favoured by architects• Concealed or exposed installation (by means of exposed

frame)

Swiss Garde 360 24V ConcealedVersion 360° with large detection area for concealed or exposed ceiling installation

Nominal voltage: 20-26V AC or DCSwitching capacity: 5ADetection area: 360°Reach: 6 m to 16 mMounting height: approx. 2 m – 8 m, max 16 m diameterTwilight controller: 10 – 2000 luxTime controller: 0.7 secs short duration pulse, 7 secs to 9 minsProtection class: IP 20 indoor mounting / class IITemperature range: 0° C to + 40° CDimensions: 86 mm x 86 mm x 35 mm 3 year warranty

Properties/Assembly

The motion detector Swiss Garde 360 24V Concealed is suited forconcealed ceiling installation in larger rooms, such as offices andcorridors, for which a detection area of up to 16 m is desired. It is the‘favourite’ of architects preferring a discrete, hardly visible motiondetector. The detection area can be adjusted optimally by means ofthe adjustable reach. We recommend to connect in parallel up to 4 Swiss Garde 360 24V Concealed.

Short duration pulse version

For larger installations, such as in schoolhouses, staircases, warehouses, etc., we recommend to apply the short duration pulse function and to energise the light via a time relay.

The Swiss Garde 360 24V Concealed Model


Swiss Garde 360 24V white 25500 120.00





max. 16m

Side view

Top view



max 16m







Item no 25410





Trial run


Holiday programs



Safety guardDevice protection against balls and vandalism.Dimensions: 150 mm Ø x 80 mm

Further accessories see p. 67Item no 3331

max 16m

max

16

m

optional

Your advantages


• Optional mini hand-held transmitter On/Off/Automatic• Flat installation on a cover plate or wall installation on an

exposed socket• Detection 180° horizontally, 90° vertically, mounting at

1– 5 m height• Standard timer and integrated short duration pulse for the

activation of staircase switches and gongs, etc.• Preset standard parameters• Test function with PIR hand-held transmitter• Programming stays intact in case of power failure• ON/OFF/AUTO and holiday function etc. via PIR hand-held

transmitter• New high-performance relay










Trial run


Holiday programs



NEW 08

For ceiling installation For wall installation with cover plate with exposed socketl

Exposed socket and cover plate

included in delivery

Swiss Garde 3000 IRVersion for concealed ceiling installation with creep zone protection

Nominal voltage: 230 V / 50 HzSwitching capacity: 2300 Watt / 10A ohmic (cos ϕ 1,0)

1150 Watt / 5 A inductive (cos ϕ 0,5)1-light electronic control gear: 30 x18 W, 25 x 36 W or 20 x 58 W max , 2-light electronic control gear: 20 x (2 x18 W), 15 x (2 x 36 W) or 10 x (2 x 58 W) max

Detection area: 200° horizontally + 360° creep zone protectionMounting height: approx. 1m – 5 mReach: approx.14 m front and approx. 7 m sidewise, Ø 5m creep

zone protectionTwilight controller: 5 – 2000 LuxTime controller: short duration pulse or 10 secs to 12 minsProtection class: IP 54 Splash-proof / class IITemperature range: -30° C to + 55° CDimensions: 86 mm x 86 mm x 68 mm (on plate)

70 mm x 70 mm x 88 mm (on exposed socket)3 year warranty

Properties/Assembly

The Swiss Garde 3000 IR is a perfect handyman, ideal for ceilingand wall installations outdoors and indoors. Depending on require-ments, it can be clicked onto a round exposed socket, a flat coverplate 87 x 87 mm, or onto the Züblin 500W and 150W floodlights.The new detector is a flexible all-rounder with small dimensionsand a timer with integrated short duration pulse. It is waterproofIP54, provided with a detection area of 180° and another one thatis 360° directed downwards, and is remote controllable with thewell-known PIR hand-held transmitter.

IIPP5544

CLICK !The Swiss Garde 3000 IR is delivered with a roundexposed socket and a square cover plate; ideal forwall or flat ceiling installations!

The application of threeIR sensors with LED display allows optimalfunctions.


The little flexible and flat all-rounder !

Click !

Side view

Top view



200° horizontally + 360° creep zone protection

14


15

Presence Detector Swiss Garde

The Swiss Garde 290 IR Model


Swiss Garde 290 IR 25250 95.00



0

Swiss Garde 290 IR Corner InstallationNominal voltage: 230 V / 50 HzSwitching capacity: 2000 Watt /10A ohmic (cos ϕ 1.0)

1000 Watt / 5 A inductive (cos ϕ 0.5)Detection area: approx. 360°/15mReaches IR Regulation: 6 m to 15 m, depending on mounting heightTime controller: 0.7 secs short duration pulse or 10 secs to 12 minsLight value: approx. 10 lux – 2000 luxProtection class: IP 44Temperature range: -20° C to + 55° CDimensions: 130 mm x 115 mm(+40) x 80 mm

heightxdepthxwidth3 year warranty

Properties/Assembly

The Swiss Garde 290 IR is designed for corner installation andmonitors 2 house fronts with a 360°/15 m detection area simulta-neously.

The reach, follow-up time and lux value can be set at the devicedirectly or via the PIR remote control.Monitoring of the right and left house fronts can be determinedindividually with the aid of a suitable blind.Ideal mounting height: 2 – 4 m, waterproof IP44.


In case too many electronic control gears and fluorescent lightsare energised, we recommend the short duration pulse functionwith a timing relay.

15m

15m

Top view



Setting of the potentiometer manually or via PIR remote control.

Your advantages


• Large 360°/15 m detection area with creep zone protection• Simple and quick installation with slide closure• Preset standard parameters• Test function with PIR hand-held transmitter• Programming stays intact in case of power failure• Integrated short duration pulse function with pause time

selectable via PIR hand-held transmitter• ON/OFF/AUTO and holiday function etc. adjustable

via PIR hand-held transmitter• Reach control via PIR hand-held transmitter and via blind• Mini hand-held transmitter for ON/OFF/AUTO switching

as an option• Transmission of all selected parameters at the push

of a button


Item no 25320 see p.4





Item no 25310





Trial run


Holiday programs

Deactivation of the key function


IP44

15m

Side view


Your advantages


• Concealed presence detector, suited for wall installation at a height of 1 m – 2.5 m

• Device can be installed in any standard switch box• Additional pushbutton input for manual switching• Additional switch contact for the control of heating /

ventilation / air conditioning • Detection reach adjustable via ‘SENS’ potentiometer• Simple installation with factory program setting • New high-performance relay

Swiss Garde 300 PresenceConcealedPresence detector for wall installation

Nominal voltage: 230 V / 50 HzSwitching capacity channel1: 2000 Watt / 500 VA 10 A (cos ϕ 1.0),

channel 2: 500 W, 1-light electronic control gear: 30 x18 W, 25 x 36 W or 20 x 58 W max2-light electronic control gear: 20 x (2 x18 W), 15 x (2 x 36 W) or 10 x (2 x 58 W) max

Detection area: 180°Reach: 6 m – 10 m, presence: 3 – 4 mMounting height: approx. 1 m – 2.5 mTwilight controller: 5 – 1000 luxTime controller: short duration pulse 0.7 secs, 7 secs to 5 minsProtection class: IP 44 for outdoor and indoor mounting / class IITemperature range: -20° C to + 50° CDimensions: 86 mm x 86 mm x 35 mm 3 year warranty

Properties/Assembly

The Swiss Garde 300 Presence Concealed is ideal for assemblyabove a door or at the height of the switch to replace a pushbut-ton. It is suited for offices and meeting rooms etc in which installa-tion of ceiling detectors is not ideal. The automatic light control,depending on presence and daylight, prevents unnecessary powerconsumption by means of the cut-off mechanism.

The Swiss Garde 300 Presence Concealed Model


Swiss Garde 300 Presence Concealed 25210 110.00

Swiss Garde 300 Presence 24 V Concealed 25230 110.00

Swiss Garde 300 Presence KNX/EIB 25240 250.00






Mounting height Reach

1.0 m 6 m1.5 m 7 m2.0 m 8 m2.5 m 9 m3.0 m 10 m

Application of pyrodetectors for optimal detection area

IP44










Trial run


Holiday programs




optional optional

NEW

Available from

1.1.08


17

Motion Detector Swiss GardeMotion Detector Swiss Garde

16

Side view 90° vertical detection

Top view/detection180°/10m



The Swiss Garde 300 D IR Model


Swiss Garde 300 D IR, white incl. hand-held transmitter 25290 80.00



.00

Your advantages

• Setting of all parameters LUX/SENS/Time manually or via PIR hand-held transmitter

• Optional mini hand-held transmitter On/Off/Automatic• Additional pushbutton input for manual switching• Fits into any standard switch box• Can be combined with other branded switch programs• Detection 180° horizontally, 90° vertically, mounting

at 1– 5 m height• Standard timer and integrated short duration pulse for

the activation of staircase switches and gongs, etc.• Preset standard parameters• Test function with PIR hand-held transmitter• Programming stays intact in case of power failure• Integrated short duration pulse function with pause time

selectable via PIR hand-held transmitter• ON/OFF/AUTO and holiday function etc. via PIR hand-

held transmitter• New high-performance relay










Trial run


Holiday programs



New electronic with levelling of reach!

NEW 08

max 10 m

max 10 m

The Swiss Garde 180 IR Concealed Model


Swiss Garde 180 IR Concealed white 25280 80.00



0

Swiss Garde 180 IR ConcealedFor wall installation


1150 Watt / 5 A inductive (cos ϕ 0.5), 1-light electronic control gear: 30 x18 W, 25 x 36 W or 20 x 58 W max2-light electronic control gear: 20 x (2 x18 W), 15 x (2 x 36 W) or 10 x (2 x 58 W) max

Detection area: 180°Reach: 12 m maxMounting height: approx. 1 m – 1.5 mTwilight controller: 10 –1000 luxTime controller: 7 secs short duration pulse or 10 secs to 12 minsProtection class: IP 20 for indoor mounting / class IITemperature range: -20° C to + 50° CDimensions: 86 mm x 86 mm x 35 mm 3 year warranty

Properties/Assembly

Swiss Garde 180 IR Concealed is ideal for assembly at theheight of the switch to replace a pushbutton. It features a dis-crete design. The detection area can be adjusted optimally bymeans of the adjustable reach.

Short duration pulse version

For larger installations, such as in schoolhouses, staircases,warehouses, etc., we recommend to apply the short durationpulse function and to energise the light via a time relay.

Top view



Your advantages




• Larger pulse pause time prevents switching noises• Additional pushbutton input for manual switching• New high-performance relay with high electronic control

gear switching capacity• Preset standard parameters• Test function with PIR hand-held transmitter• Programming stays intact in case of power failure










Trial run


Holiday programs



Application of two pyrodetectors for optimal detection area

max 12 m

max 12 m

max

12

m


Swiss Garde 300 D IRVersion for concealed wall installation


1150 Watt / 5 A inductive (cos ϕ 0.5), 1-light electronic control gear: 30 x18 W, 25 x 36 W or 20 x 58 W max2-light electronic control gear: 20 x (2 x18 W), 15 x (2 x 36 W) or 10 x (2 x 58 W) max

Detection area: 180° /90°/12mMounting height: approx. 1 m – 2.5 mReach: approx. 6-10 mTwilight controller: 10 –2000 luxTime controller: 0.7 secs short duration pulse or 10 secs to 12 minsProtection class: IP 20 indoor mounting / class IITemperature range: -0° C to + 35° CDimensions: 86 mm x 86 mm x 35 mm 3 year warranty

Properties/Assembly

The Swiss Garde 300 D IR detects horizontally and vertically by means of 3 pyrodetectors. It is therefore suited for installationat a height of 1 – 2.5 m and offers advantages in the staircasewith its vertical detection. It fits into any standard switch boxand, with its standard timer and integrated short duration pulsefunction, is suited for direct light switching or also for energising relays and staircase switches. The new detector is remote con-trollable via the PIR hand-held transmitter. With an additional intermediate frame, the Swiss Garde 300 D IR fits into the German branded switch programs as per DIN 49075. The 50 x50 mm cover plate is available in pure white, similar to RAL9010. Other colours on request.

optional optional

Covering fits into the brandedswitch programsas per DIN 49075

max

10

m



18

Swiss Garde 360 WMWaterproof IP 44 version for wall installation

Nominal voltage: 230 V / 50 HzSwitching capacity: 2000 Watt / 10 A (cos ϕ 1.0)

500 VA / 2.5 A (cos ϕ 0.5)Detection area: 180°Reach: 6 m – 10 m, depending on mounting heightMounting height: approx. 1 m – 3 mTwilight controller: 5 –1000 luxTime controller: 7 secs to 5 minsProtection class: IP 44 for outdoor and indoor mounting / class IITemperature range: -20° C to + 50° CDimensions: 86 mm x 86 mm x 35 mm 3 year warranty

Properties/Assembly

Swiss Garde 360 WM is waterproof and ideal for assemblyabove a door or at the height of the switch to replace a pushbut-ton. It can be applied outdoors and indoors and features a dis-crete design. The aluminium version is optimally integrated onconcrete walls or is recommended in combination with alumini-um or stainless steel lights.The detection area can be adjustedoptimally by means of the adjustable reach.

Swiss Garde 360 WM Short Duration PulseShort duration pulse model for time relay or gongTechnical data as for WM model/ Pause time: approx. 5 secs - 60 secs

The pause time between 2 pulses is 30 secs. This is advanta-geous for avoiding unnecessary pulse noises. For larger installa-tions, such as in schoolhouses, staircases, warehouses, etc., werecommend to apply short duration motion detectors and to ac-tivate the light via a time relay.

The Swiss Garde 360 WM Models


Swiss Garde 360 WM white 25100 65.00

Swiss Garde 360 WM aluminium 25110 65.00





Side view

Top view



Application of two pyrodetectors for optimal detection area

Aluminium model, suitable for installationon concrete walls or in combinationwith aluminium or stainless steel lights.

Mounting height Reach

1.0 m 6 m1.5 m 7 m2.0 m 8 m2.5 m 9 m3.0 m 10 m

Your advantages

• Splash-proof IP 44 for outdoor mounting• Concealed motion detector, suited for wall installation at a

height of 1 m – 3 m• Device can be installed in any standard switch box• Detection reach adjustable via ‘SENS’ potentiometer• Optimal for assembly above a door• Concealed installation in inlet socket (outdoors and indoors)

or exposed installation with exposed frame


Exposed framefor all Swiss Garde models ofseries 360 and 180, (except E-CH)

Item no 25400

IP44

Safety guardDevice protection against balls and vandalism.Dimensions: 150 mm Ø x 80 mmItem no 3331

19

The Swiss Garde MZ5000 Kit Models


Swiss Garde MZ5000 kit 26350a 220.00

v

Motion detectorNominal voltage 230V, 50HzDetection area 360° + 200°/16 m(over the entire area)Creep zone protection with360°-vertical detection Internal limitation of reach2 integrated relays 16 A / 10A2 time controllers, light and holiday controller

Pluggable HF aerial moduleReach 100 m free visibilityIntegrated programming key

5 year warranty, CE, Technical Inspection Agency South, IP 54, RoHS compliant

Swiss Garde MZ 5000HF control pad 2-wayReach 100 m free visibility2-way, 433 MHzBidirectional information exchangeOn, Off, Holiday and Test functionLight value storage, reach controller, etc.250 channels, 4 programmable at a time10 programmable acoustic signals Controllable sound levelLED signal lamp

MZ5000 will then switch on the light for 3.5 hours everyevening, as if you were at home. And for the time after, thesensor will work with its standard detection functions. The additional interactivity between 2 sensors makes the SwissGarde MZ 5000 an outstanding innovation. The wireless in-teractivity allows brilliant installations for more security andpower saving.

Swiss Garde MZ 5000 – for protection, comfort and power savingThe new Swiss Garde MZ 5000 is a premium motion detectorfor outdoor and indoor mounting. It switches the light on andoff according to requirements, and an excellent 360°+200°/15m detection area ensures quick and reliable detec-tion. Most modern electronics with holiday function and lev-elling of reach offers many functions for maximum comfortand security.

First motion detector with bidirectional information exchangeIf the Swiss Garde MZ 5000 is retrofitted with a pluggable aer-ial module and a control pad, the detector is interactive. Nowyou can switch it on and off across doors and walls and receive signals from each one of your detectors. For example,an alarm signal will warn you if there is someone in thegarage, and a ding-dong will sound, as soon as there is some-one at the entrance.

Security functionsBefore your holiday, just activate the security mode aroundyour home for maximum protection. Your Swiss Garde

Now you can control your motion detector across the walls!First motion detector with bidirectional information exchange

Light control – from the comfort of your sofaFor the first time a motion detector can be easily switched on and off across doors and walls and be programmed to security!

Advantageous: control pad with wall holder in light switch format.Operation: On/Off/Automatic, Holiday, Acoustics/Sound level, Party, etc.

Now you know when someone is here !As soon as someone approaches the sensor, thelight is switched on immediately and, additionally,the detector sends a radio signal to the controlpad. Depending on programming, you will hear ading-dong, an alarm signal or a ring tone.

Swiss Garde MZ 5000 white, Item no 26350Action kit Item no 26350AComplete set with detector, Bidi module and control pad

optional

Item no 25320 see p.4









Trial run


Holiday programs

Deactivation of the key function



Swiss Garde MZ 5000For ceiling and wall installation with 2 relays and large detection area

Nominal voltage: 230 V / 50 HzSwitching capacity relay 1: max 2300 W light bulbs (cos ϕ = 1)

max 1150 VA inductive (cos ϕ = 0.5)Switching capacity relay 2: max 5 A

Detection area: 180° + 360° / 15 m over the entire areaTime controller: 3 secs to 30 mins /+short duration pulseLight value storage: 2 lux to daylightHoliday controller: 2-8 hrs from duskProtection class: IP 54, RoHS, CETemperature: -25° C to + 55° CDimensions: 95 mm x 109 mm x 107 mm (height x width x depth)5 year warranty

Creep zone protection with 360° vertical detection Internal limitation of reach2 integrated relays 16A/5A

Excellent for more security and power saving!

The Swiss Garde MZ 5000 is a premium motion detector for out-door mounting or for mounting in hallways, staircases, garages,workshops, etc. Its 16 A relay switches loads of up to 2300 Watt,and the additional 5 A relay is mostly used for the activation ofventilators and ventilation systems. The Swiss Garde MZ 5000can be made into a motion detector with bidirectional informa-tion exchange by means of a bidirectional cartridge.

Motion Detector bidirectional Swiss Garde

21


20

Swiss Garde MZ 5000 Bidirectional


Bidi module (aerial white) 26800 25.00

Bidi module (aerial black) 26810 25.00

Bidi module (aerial aluminium) 26820 25.00

Bidi pad (control pad white) 26370 50.00

Bidi pad (control pad aluminium) 26360 50.00

Bidi moduleReach: 100 m free visibilityTransmission frequency: 433 MHzHF sender and receiver modulePluggable (Bidi mode)Send/Receive data:can be combined with max 2 control padsand/or 4MZ 5000 BidirectionalBidirectional information exchange

CE, IP 54, RoHS compliant5 year warranty

Bidirectional module can be applied at the standard modelwith a few hand movements.

Bidi module + Bidi pad = Bidi set

Relay 1 OFF (12hrs)Relay 1 AUTORelay 1 ON (12hrs)

LED

Holiday mode(3.5 hrs)

Choice of tune

Sound level ofring tone

Relay 2 OFF (12hrs)Relay 2 AUTORelay 2 ON (12hrs)

Learn key (lux value)

Party mode (max 6 hrs)

Trial run

Programming key

Loudspeaker

Controlpad

Reaches:5 m, 10 m, 15 m

Your advantages

• Bidirectional information exchange• HF programming across walls• Switching On/Off, shock lighting, etc. on distances up

to 100 m (free visibility)• Control pad with 10 acoustic signals• Motion detector for recognition, for example:

- Alarm sound at the garage- Ding-dong at the entrance

• Conversion from motion detector to bidirectional function in no time at all

• Interactivity between the motion detectors• Flexible parallel circuit without cable (also over different

fuse groups)• Two-way or one-way initialisation

Swiss Garde MZ 5000


Swiss Garde MZ 5000 white 26350 130.00

Swiss Garde MZ 5000 black 26340 130.00

Swiss Garde MZ 5000 aluminium 26330 130.00

Corner socket white 26510 10.00

Corner socket black 26530 10.00

Corner socket aluminium 26520 10.00

Side view Top view

DuskHoliday modeOFF, 2-8 hrs

Tilt LSensor tilt left(adjustment of reach)

LuxTwilight sensorfor relay 1Learn, 2-daylight

Time 2Follow-up time relay 2Pulse, 3 secs – 30 mins

Time 1Follow-up time relay1Pulse, 3 secs – 30 mins

Tilt RSensor tilt right(adjustment of reach)

To reach the controllers: Carefully pull the sensor head out of the anchorage.The sensor head can be rotated by +/- 45°.

Your advantages

• 1-screw or 2-screw mounting for simple and quick installation

• 2-screw mounting corresponds to Swiss Garde MZ 2000 screws, for simple and quick replacement

• Wide wiring space for easy assembly • Wall and ceiling, indoor or outdoor corner mounting possible• Large detection area: 180°+ 360°/15m• Time, light and holiday controller with internal setting of

reach, short duration pulse function• Light value storage with memory• 2 relays for light + heating / ventilation / air conditioning• 15 m detection area, sidewise also• 5 year warranty, IP 54, CE, RTTE

Swiss Garde MZ5000 + Bidi set = Swiss Garde MZ 5000 Bidirectional

Lens blindsincluded

Wide connection space for simple and easy ceiling or wall installation.

Swiss Garde MZ 5000 bidirectionalWith bidirectional information exchange. Sending and receiving information via HF control pad

Control padReach: 100 m free visibilityTransmission frequency: 433 MHzBidirectional information exchangeOn, Off, Holiday and Test functionLight value storage, etc.Adjustment of reach: 5 m, 10 m, 15m250 channels, 4 programmable at a time10 acoustic signals, controllable sound level2 LED signal lampsCE, IP 54, RoHS compliantDimensions control pad: 150mm x 50mm x 16mmDimensions with holder: 162mm x 85mm x 17mm

NEW

NEW

15 m

3 year warranty !

S

wiss Garde MZ 5000

M. Züblin AG

3 yearwarranty !

IP54

IP54

Corner socket for outdooror indoor corner mounting

Bidirectional, interactiveSee p. 62, 63

Assembly

The Swiss Garde MZ 5000 Bidirectional features interactivity be-tween two detectors and bidirectional information exchange witha control pad. For maximum radio reach, the MZ 5000 shouldnot be mounted on or near metal and iron, and the mountingheight should be at least 2 – 2.5 m. Due to the interactivity, twoMZ 5000s can be connected wirelessly in parallel, and thisacross different fuse groups.

Before final installation we recommend to check the radio trans-mission by means of the control pad and to remove parasitic frequencies and also materials and devices reducing the reach.

Bidirectional, interactiveSee p. 62, 63

180°/ 360°



22

Swiss Garde 360 HFHF wall installation and ceiling detector

Nominal voltage: 230 V / 50 HzHF transmitter power: 1 mWSwitching capacity: 1000 Watt / 5 A, 500 VA (cos ϕ 1.0)

500 VA inductive (cos ϕ 0.5)Detection area: 360° wall or ceiling installationReach: 1-8 m controllableTwilight: approx. 10-1000 luxTime set: approx. 5 secs - 30 minsProtection class: IP 20, I, CEDimensions: 40 mm x 30 mm x 120 mm 3 year warranty

Properties/Assembly

The Swiss Garde HF switches the lighting on and off automaticallydepending on motion and daylight. Due to its high frequency tech-nology, the integrated sensor reacts to the smallest movements ofthe person moving, even without ‘free visibility’.The sensor is particularly suited for interior rooms, reduces currentconsumption and saves on energy costs.

HF Sensor 360 Assembly

Nominal voltage: 230 V / 50 HzHF transmitter power: 1 mWSwitching capacity: 1000 Watt / 5 A, 500 VA (cos ϕ 1.0)Detection area: 360° ceiling , or 160° wall installation Reach: 1-12 m controllableTwilight: approx. 20 lux daylightTime set: approx. 8 secs - 12 minsProtection class: IP 20, I, CEDimensions: 90 mm x 40 mm x 43 mm 3 year warranty

The HF Sensor 360 Assembly is suited for light or ceiling installa-tion. It can be installed invisibly behind a wooden plate or a ceilingprovided with holes, and requires for detection only an opening of35 mm or 2 x 5 mm diameter.

The Swiss Garde HF Model


Swiss Garde 360 HF 2737 80.00

HF Sensor 360 Assembly 2736 75.00

Swiss Garde 320 HF Concealed 27350 98.00

max 8m

Your advantages

• HF sensor reacts well even with temperatures of 30 – 40° Celsius

• Detects smallest movements even without free visibility• Can be installed behind the ceiling (with wood, open

metal, etc)• Time and light values and reach are adjustable• Switching of lighting according to requirements, saves

current and energy coss• Ideal in corridors, staircases, vestibules and garages, etc

Side view

max 8m

max

8m

360°

Wall installation

Ceiling installation

360°

160°

max 8m

max

8m

max

8m

max 4m


approx. 1000 mW < 1 mW

The HF sensor sendsout a signal requiringless than 1 mW andthus emits 1000 timesless than a convention-al mobile phone!

Swiss Garde 320 HF ConcealedNominal voltage: 230 V / 50 HzFrequency range: 10,525 GHzHF transmitter power: 1 mWSwitching capacity: 2300 Watt / 10A (cos ϕ 1,0) 1150 VA / 5A inductive (cos ϕ = 0,5)Detection area: 180° wall installationMounting height: Wall installation 1.1m – 1.5mReach: Controllable 1-8 m / front max 15mTwilight: approx. 10-1000 luxTime set: approx. 8 secs – 12minsProtection class: IP20,I, CEDimensions: 80 mm x 80 mm x 20 mm3 year warranty

The Swiss Garde 360 Assembly is suited for concealed wall andceiling installation.

Available from

1.1.08

NEW 08

Motion detectorspp. 24–30Infra Garde

Infra Garde Survey

23

Infra GardeCamtec PIRItem no 3330

Infra GardeCamtec PIR Camera

Item no 4030

Infra GardeCamtec Dummy

Item no 7535

Installable dimmer

Item no 6072

Radio SwitchHF Radio Pushbutton

Item no 6040

Infra Recept10A ReceiverItem no 6050

Infra DetecRF 180

Item no 6010

Infra Garde12V

Item no 3323

Infra Garde180 Concealed

Item no 3220

Infra Garde140 Plus

Item no 3020

Infra Garde200 Plus

Item no 3060

Infra Garde270 Concealed

Item no 3120

Infra Garde360 ExposedItem no 3327

Radio remote controlsp. 31

Infra Garde

Camerasp. 32

Camtec

3 yearwarranty !

Infra Garde

M. Züblin AG

3 yearwarranty !

Infra Garde360 PresenceItem no 3505

Infra GardeMaxum

Item no 3070

Infra ReceiverAdaptor PlugItem no 6070

Infra Garde

25

Motion Detector Infra Garde

24

The Infra Garde 360 Presence model


Infra Garde 360 Presence 3505 98.00

IR hand-held transmitter 3506 20.00


Your advantages

• Two independent relays for lighting, heating, ventilation, etc.• IR hand-held transmitter On/Off/Automatic: applicable

selectively!• IR remote control adjustable to relay 1 (channel 1) or

relay 2 (channel 2)• Time controller with integrated short duration pulse function

and light controller• Advantageous connecting and assembly system

Safety guard(Option)

4 pyrode-tectors

L = Phase = RedN = Neutral Conductor = BlueL’ = Connected = BrownPotential-free 5A = Black

Presence and Motion



Item no 3331

The Infra Garde 360 Exposed model


Infra Garde 360 Exposed white 3327 45.00


Infra Garde 360 ExposedNominal voltage: 230 V / 50 HzSwitching capacity: 2000 W / 10 A (cos ϕ 1.0)

500 VA / 2.5 A (cos ϕ 0.5)Detection area: 360°Reach: 6 m to 16 m depending on mounting heightMounting height: between 2 m and 4 m at the ceilingTwilight controller: 5 –1000 lux Time controller: 8 secs to 7 minsProtection class: IP 20 indoor mounting / class IITemperature: 0° C to + 55° CDimensions: 118 mm diameter x 60 mm 3 year warranty

Properties/Assembly

The Infra Garde 360 Exposed is installed at the ceiling and issuited for assembly in garages or in the corridor.

The integrated plastic guard in front of the lens protects the lensagainst vandalism. The detection area can be adjusted optimallyby means of the adjustable reach.

Top view

Front approach = not sensitive(distance–50%)


Your advantages

• Large detection area up to max 16 m diameter with 3 IR sensors

• Reach controller• Time and twilight controller• Good cost/performance ratio• Simple exposed ceiling installation• Integrated lens safety guard• LED display



Item no 3331

with integrated pulse function

Infra Garde 360 PresenceInfra Garde 360 Presence:Nominal voltage: 230 V / 50 HzSwitching capacity relay 1: max 2000 W / 10 A (cos ϕ 1.0) 500 VA / 2.5 A (cos ϕ 0.5)

Switching capacity relay 2: potential-free contact max 5 ADetection area: 360°Reach: 12 m max, 8 m presence depending on heightMounting height: between 2 m and 4 m at the ceilingTwilight controller: 5 –1000 lux (relay 1 only)Time set: pulse, 2, 5, 10, 15 minsProtection class: IP 20 interior / class IITemperature: 0° C to + 40° CDimensions: 125 mm Ø x 75 mm3 year warranty

IR hand-held transmitter:Nominal voltage: 1 x battery 12 V type 23 AReach: 5 m - 6 m front to switchgear 360 presenceDimensions: 70mm x 25mm x 13mm

Properties/Assembly

The Infra Garde presence detector detects the smallest move-ments with 4 pyrodetectors and a high-resolution lens, and eval-uates every signal by means of first-class electronics. The InfraGarde Presence ensures optimal energy management through 2independent relays. Relay no 1 switches and controls the lightingdepending on persons present and on brightness. Relay no 2switches the heating, ventilation or gongs, etc, potential-free andindependently of brightness. Both relays can be set to pulsefunction or follow-up time via time controller. The light connectedto relay no 1 is switched off automatically, as soon as the naturalbrightness exceeds the value set on the device. Depending onrequirements, the light (relay no 1) can be entirely switched onand again off via the remote control provided. In this way the automatic can be disconnected for talks or on leaving the roomand again be reconnected later on according to requirements.With the predefined reach, individual devices can also be con-trolled selectively via a hand-held transmitter. The Infra GardePresence monitors rooms of up to 100 m2 and can be switchedin parallel for additional surfaces without any problems. The twofirst-class power relays switch up to 2000 W and ensure flawlessfunctioning even with FLs or energy-saving lamps. The newpresence detector is planned in a way to allow for its quick andeasy installation!

included


27


26

Infra Garde 270For corner and wall installation

Nominal voltage: 230 V / 50 HzSwitching capacity: 1000 W / 5 A (cos ϕ 1.0)

250 VA / 1.25 A (cos ϕ 0.5)Detection area: 270°Reach: 12 m front and 6 m sideMounting height: between 2 and 3 m at the cornerTwilight controller: 5-1000 luxTime controller: 20 secs - 10 minsProtection class: IP 44 splash-proof / class IITemperature: -25° C to +55° CDimensions: 70 mm x 80 mm x 120 mm 3 year warranty

Properties/Assembly

The Infra Swiss Garde 270 features a large detection area of270°. With its integrated corner socket, it is planned for externalcorner assembly at heights of 2 m – 4 m. It can, however, also be mounted on the wall without a corner socket.The IP 44 waterproof sensor is equipped with controllers for re-ach, time and light. All values can be adjusted continuously. TheInfra Garde 270 monitors 2 house fronts at the same time, with adetection reach of 6 m each. A competitive motion detector witha 3 year warranty!

IP44

The Infra Garde 270 model


Infra Garde 270 white 3120 60.00

Side view

Top view



Your advantages

• 270° detection area at 2 levels• Adjustable detection reach with reach controller• Time, reach and light controller• Demountable corner socket, advantageous construction

for waterproof corner socket even under difficult assembly conditions

• Pivoted and inclinable sensor head

Infra Garde

The Infra Garde Maxum model


Infra Garde Maxum white 3070 65.00

Infra Garde Maxum black 3080 65.00

Infra Garde Maxum aluminium 3090 65.00


Infra Garde MaxumNominal voltage: 230 V / 50 HzSwitching capacity: 2000 W / 500 VA Detection area: 360°+ 200°/15 mReach: 12 m front + 6 m sideTwilight controller: 5-1000 luxTime controller: approx. 5 secs – 12 minsProtection class: IP 55Dimensions: approx. 166 mm x 78 mm x 65 mm 3 year warranty

Properties/Assembly

The Infra Garde Maxum switches the lighting on and off auto-matically, depending on motion and daylight. It features a largeand dense detection area and is suited for wall installation at aheight of 2-3 m. The 1-screw (or 2-screw) fastening system al-lows quick assembly. Due to its unique blind system, the reachcan be adjusted to 15 m or 8 m with a few hand movements.Visibility or not of the optical warning system with flashing redLEDs can be selected at the same time. The activated warningsystem ensures maximum deterrence.

Your advantages

• Excellent connecting system for quick assembly• Large detection area 360°+ 200°/12m• 6 detection levels with creep zone protection• Unique blind system for control of reach with one hand

movement• Connectable optical LED warning system• Flat design, projection 65 mm only• Time, light and reach controller• Holiday circuit with time controller for continuous lighting

from twilight (max 8 hrs)• Ideal for exterior lighting, industrial areas, underground

car parks, staircases, warehouses, corridors, etc.• Protection class IP 55, CE, Technical Inspection

Agency South


Safety guardDevice protection against balls and vandalism.Dimensions: 160 mm x 120 mm x 75 mm

Item no 3071

Maximum detection !360° + 200°/12 m

Reach 12 mLED visible

Reach 6 mLED invisible

Reach 12 mLED invisible

Reach 6 mLED visible

White Black Aluminium


The Infra Garde 180 Concealed model


Infra Garde 180 concealed white 3220 55.00


Infra Garde

29


28

Light «On» Automatic«Sensor»

Light «Off»

Your advantages

• Concealed wall installation at a height of 1 m – 1.5 m

• Integrated short duration pulse function

• Fits into any standard device socket

• Integrated On/Automatic/Off switch

• Detection 180° at a horizontal level

• Competitive concealed motion detector

The Infra Garde 200 and 140 models


Infra Garde 200 Plus white 3060 55.00

Infra Garde 200 Plus black 3050 55.00

Infra Garde 140 Plus white 3020 45.00

Infra Garde Plus 140 black 3010 45.00


Side view

1 Front approach = not sensitive(distance–50%)

2 Sidewise approach= sensitive

1 1

2 2

Black

Top view140°

Top view200°



Item no 3011

Your advantages

• Simple and quick assembly• Detection area 200° or 140° at three different detection levels• Integrated short duration pulse function for the activation

of staircase switches, gongs, etc.• Sensor head can be inclined by 45° and be rotated by 20°

each time• Hinge clamp and snap fits• Switch-on of sensor via external break switch possible

(2 secs power failure)• Simple determination of detection area with blind clips or

levelling of the sensor head.

Standard circuit

With the option to activate the motion detector via an external pushbutton.

With clips for lens cover

Any adjustable detection area due to clips.

With integrated pulse function

Infra Garde 200 Plusand 140 PlusNominal voltage: 230 V / 50 HzSwitching capacity: 1000 W / 5 A (cos ϕ 1.0)

250 VA / 1.25 A (cos ϕ 0.5)Detection area: Infra Garde 200 = 200° / Infra Garde 140 = 140°Reach: 12 m front and 6 m sideMounting height: between 2 and 3.5 m at the wallTwilight controller: 5-1000 luxTime controller: 1 sec pulse, 8 secs to 7 minsProtection class: IP 44 splash-proof / class IITemperature: -25° C to +55° CDimensions: 98 mm x 102 mm x 96 mm3 year warranty

Properties/Assembly

The Infra Garde 200 or 140 is a universal motion detector forsimple and quick assembly. The sensor head can be rotated 45° vertically and 20° horizontally each time. In addition, the detection area can be determined through lens cover clips. Excellent cost/performance ratio. With a sensor head inclineddownwards, it is often assembled shifted sideways above adoor. A hinge clamp and snap fit facilitate the assembly.

IP44

With integrated

pulse function

max 8 m

max

8 m


Side view

Top view



Infra Garde 180 ConcealedFor concealed wall installation with On/Automatic/Off manual control switch


250 VA / 1.25 A (cos ϕ 0.5)Detection area: 180°Reach: 8 m front and 5 m sideMounting height: between 1 m and 1.5 m at the wallTwilight controller: 5-1000 luxTime controller: 1 sec pulse, 7 secs to 12 minsProtection class: IP 20 indoor mounting / class IITemperature: 0° C to +40° CDimensions: 80 mm x 80 mm x 53 mm3 year warranty

Properties/Assembly

The Infra Garde 180 Concealed is ideal for assembly at theheight of the manual control switch.

It detects at a horizontal level with an aperture angle of 5 degrees.In this way smaller animals are not detected.

Assembly is suited particularly for vestibules, corridors, staircas-es, WCs, garages, etc., and the measurements are planned forinstallation into a standard inlet socket.

A particularity of this sensor is that the manual control switch ishidden in the upper part of the casing and hardly visible. Thestandard OnOff light switch function and the automatic functioncan be set via the manual control switch.

Z-Radio 433 MHz Radio Remote Control

31

The Z-Radio models


Infra Detec RF DC 6 V 6010 60.00

Concealed installation dimmer 6072 45.00

Radio receiver RE 10 A 6050 40.00

Internal adaptor plug 6070 30.00

Radio pushbutton 6040 25.00


30

Infra Detec RFNominal voltage: DC 6 V (4 x 1.5 V LR6)Transmitting power: 2 … 5 mW ERP, Freq.: 433.92 MHzReach, free visibility: max 50 m (30 m)Time controller: approx. 5 secs - 5 mins pauseDetection area: approx. 180º / 12 mDimensions: 120 mm x 88 mm x 125 mm3 year warranty

Properties/Assembly

The light or other consumer loads can be switched on or off wi-relessly with modern high frequency technology. The radio signalworks with distances up to 30 metres across doors and walls! Inthis, hand-held transmitters, radio motion detectors, radio gongsand 10A receivers can be freely combined.Choose yourself whether the radio motion detector is to activatethe light, the gong or both together at the same time! Or whetherthe light is to be controlled automatically by the sensor in the ga-rage and the sensor at the entrance! Different codings with 256combinations allow distribution into different groups. Disturban-ces from the outside can this way be prevented and the functi-ons be optimised!

IP44I ETS 30020

Your advantages

• Undesired but also desired visits will be announced in your home automatically

• 230 V model for electric supply or DC 6 V model available• A pleasant ding-dong will be heard and/or the lighting is

switched on automatically• With no annoying cables, simple and quick installation

Radio pushbuttonNominal voltage: 12 V DCDistance max: 50 m free visibilityDimensions: 80 mm x 80 mm x 18 mm

Radio Receiver 10 ANominal voltage: 230 V ACSwitching capacity: 10 A / 230 V ACTime controller: 5 secs to 5 mins (in combination with BWM)Possible number of codes: 256Working temperature: -10° C to +45° CDimensions: 80 mm x 80 mm x 36 mm

Concealed Installation DimmerNominal voltage: 230 V ACSwitching capacity: 60 W– 250 W for Ohm resistive loadsReception: 30 m maxDimensions: 47 mm x 47 mm x 40 mm

For combination with radio pushbutton andhand-held transmitter!

The Infra Garde 12V model


Infra Garde 12V white 3323 60.00

Infra Garde 12VNominal voltage: 12 V DC or AC.50 / 60 HzSwitching capacity: 5 A max for 12 to 230 AC / 5 A max for 12 to 30 DCDetection area: 120°Reach: max 10 m frontMounting height: between 2 m and 3 m at the wallTwilight controller: 5-1000 luxTime controller: 6 secs to 12 minsProtection class: IP 44 splash-proof / class IITemperature: -25° C to +55° CDimensions: 60 mm x 70 mm x 110 mm3 year warranty

Properties/Assembly

The Infra Garde 12V is operated with 12 V AC or DC and is idealin combination with a solar system, for camping, on a ship or ina summer house, wherever no electric supply is available or alow current cable is desired.

The mounting base allows both wall and ceiling installation.

The low current device can be connected to a 12V battery and ismostly found with solar systems or in summer houses (Pleasenote: the voltage must be at least 11Volt!). Assembly and the lay-ing of extensive electric power lines in gardens or buildings canbe saved with the Infra Garde 12V!

IP54

Ceiling installation Wall installation

Standard Infra Garde 12 Volt

Nominal voltage: 12V DC or AC /50/60 Hz

Switching capacity: 5A max for 12–230V AC

5A max for 12–30V DC

Top view



Side view

Your advantages

• The Infra Garde 12 V can be operated with 12 Volt DC or AC feed

• Ideal for application with a solar system in camping or on watercrafts

• Ceiling or wall installation, 120° detection area• Detection reach adjustable with «SENS» potentiometer

Item no 6072

Item no 6050 Item no 6040

Internal adaptor plugNominal voltage: 230 V ALPossible number of codes: 256Dimensions: 80 mm x 60 mm x 125 mm

Item no 6070


Side view

Top view



Camtec Camera

32

The Infra Garde Camtec models


Infra Garde Camtec motion detector 3330 82.00

Camtec sensor camera (with integrated video camera) 4030 130.00

Camtec dummy camera 7535 34.00

Infra Garde CamtecMotion detector in camera design!


250 VA / 1.25 A (cos ϕ 0.5)Detection area: 360°+120°Reach: 12 m front and 6 m sideMounting height: between 2 m and 3.5 m at the wallTwilight controller: 5-1000 luxTime controller: 8 secs to 7 minsProtection class: IP 44 splash-proof / class IITemperature: -25° C to +55° CDimensions: 98 mm x 102 mm x 96 mm3 year warranty

Properties/Assembly

The new camera motion detector from Züblin, along with thestandard version with motion detector, is also available with agenuine integrated camera which can be connected to a monitoror TV set. The motion detector then triggers an acoustic signalreminding to check the monitor, or it switches the light automati-cally on in order to illuminate the monitored area.

Intruders in the illuminated monitored area are displayed clearlyon the monitor! Much better than recorder takings!

IP44

Side view

Innovation

Versions

1. 360°/120° motion detector 2. Sensor video camera3. Dummy camera

120°+ 360° lens!

Mini-TV TV 128Item no 46700

20m incl.

Camera Camtec Item no 40300

230 V AC

Camtec sensor camera:

• Switch on the shock lighting !

• Acoustic warning !

• Watch the monitor !

• Activate the recorder !

Or digital video cassetterecorder DVR 4MDItem no 44000

The motion detector with maximum deterrence!Double 15 m detection area with backfield monitoring

Your advantages

• 230 V / 50 Hz motion detector and sensor camera available

• Doouble detection area: 360° +120°

• Adjustable horizontally and vertically

• Massive IP 44 aluminium casing for outdoor mounting

• Maximum deterrence!

Infra Garde Camtec for double security!Intruders will be even more deterred in the future! Infra GardeCamtec switches the shock lighting on automatically and scaresoff undesired visitors with its camera look additionally.

In camera direction, a whole house front of up to 12 m length ismonitored and, below the device, a 360° sensor ensures maxi-mum creep zone protection.The new motion detector thus moni-tors in front of, below and behind the camera, and this way in-truders do not stand any chance.

Intruders approaching from behind are also detected by the mo-tion detector and trigger the shock lighting or an acoustic signal!This means more security with an outstanding detection area!

Video camera

12 m2,5 m


• Stainless steel lights

• Ceiling lights

• Sensor lights

• Post lights

• Post floodlights

• Sensor floodlights

• Sensor lanterns

SensorLights

SensorLights

3534

Sensor Lights Survey

Sensor ceiling lightspp. 36–37

Stainless steel sensor lightsp. 40

Cerc Lamp 360 E

Item no 2720

Cerc Lamp360 PL

Item no 2710

HF Glass 80 WSensor ceiling lights

Item no 2732

HF DekoSensor ceiling lights

Item no 2734

HF BlancoSensor ceiling lights

Item no 2735

Sensor ceiling lightspp. 38–39

Stainless steel sensor lightspp. 41–44

Sensor wall lights and lanternspp. 45–46

Lan-Tec360

Item no 2006

Kube-Tec360

Item no 2008

Ruby-Tec200

Item no 2205

Post-Tec200 Ruby

Item no 2545

Ball-Tec200

Item no 2200

Post-Tec200 Ball

Item no 2540

Co-Tec360

Item no 2489

Post-Tec200 Cove

Item no 2547

Ruby-Tec 360


Corner socket for:Co-Tec 360Ruby-Tec 360Globe-Tec 360Ball-Tec 200Ruby-Tec 200Co-Tec

360Item no 2489Item no 25320

Globe-Tec 360 opal


Globe-Tec 360 clear


Globe lamp200 clear blackItem no 2310

Alu-Laterne200 black

Item no 2210

Alu-Laterne200 white

Item no 2220

Post lantern200 white

Item no 2530

Globe lamp200 clear whiteItem no 2320

Globe lamp200 opal blackItem no 2330

Globe lamp200 opal whiteItem no 2340

Sensor floodlightspp. 51–52

Sensor post lightspp. 46–47

GardenRuby black

Item no 2610

GardenRuby white

Item no 2620

GardenDC 180 blackItem no 2510

GardenDC 180 whiteItem no 2520

Sensor floodlightwith stand

Item no 1270Homelite blackItem no 2050

Homelite whiteItem no 2060

BulpirBH-2 black

Item no 2030

BulpirBH-1 white

Item no 2020

BulpirBH-1 black

Item no 2010

12

Optional PIR hand-held transmitter:

HF Glass 120 WSensor ceiling lights

Item no 2733

HF SlimSensor wall lights

Item no 2731

HF Quad 160 WSensor ceilings lights

Item no 2739

HF Quad 80 WSensor ceilings lights

Item no 2738

Post lantern200 black

Item no 2535

Sensor floodlights with stand Sensor lightsSensor house number lights

pp. 48–50


3 yearwarranty !

M. Züblin AG

3 yearwarranty !

Pro 150/180white Item no 1265

Pro 500/140white Item no 9812

Pro 150/3000 IR white Item no 1290

Pro 500/3000 IR white Item no 1280

HF Blanco and DecoOpal Glass LightsFlat HF sensor ceiling or wall lights with 8 m detection area and invisible HF sensor

Nominal voltage: 230 V – 50 HzFrequency range: 5.8 GHzIlluminant: 2 x 40 W, E27 (excl.), 1 x 60 W BlancoDetection area: 360° /12 m, 6 m radiusMounting height: approx. 2 m - 3 m or wall installationLight controller: approx. 10 - 2000 luxTime controller: approx. 8 secs - 12 minsTemperature: -10° C to +55° CProtection class: IP 20, I, CEDimensions: 300 mm Ø x 100 mm3 year warranty

Properties/Assembly

The HF ceiling light switches the lighting on and off automatical-ly, depending on motion and daylight. Due to its high-frequencytechnology, the integrated sensor reacts to smallest movementsof the moving person even without ‘free visibility’. The HF ceilinglights are mainly suited for interior rooms and, compared withconventional lights, they reduce current consumption and saveon energy costs.

The HF Glass 120 W and 80 W models


HF glass 120 W 2733 119.00

HF glass 80 W 2732 96.00

Wall lights

HF Glass 120 W or 80 W80 W and 120 W glass lights

Nominal voltage: 230 V – 50 HzFrequency range: 5.8 GHzIlluminant: 2 x 40 W, E27 (excl.) / 3 x 40 W, E27 (excl.)Detection area: 360° /12 m, 6 m radiusMounting height: approx. 2 m - 3 m or wall installationLight controller: approx. 10 - 2000 luxTime controller: approx. 8 secs - 12 minsTemperature: -10° C to +55° CProtection class: IP 20, I, CEDimensions: 400 mm Ø x 130 mm / 320 mm Ø x 110 mm3 year warranty

Properties/AssemblyThe HF ceiling light switches the lighting on and off automatical-ly, depending on motion and daylight. Due to its high-frequencytechnology, the integrated sensor reacts to smallest movementsof the moving person even without ‘free visibility’. The HF ceilinglights are mainly suited for interior rooms and, compared withconventional lights, they reduce current consumption and saveon energy costs.

37

The HF Blanco and Deco models


HF Blanco with sensor 2735 70.00

60 W-Blanco without sensor 8650 19.50

HF Deco 2734 75.00

Sensor Lights Ceiling and wall lights

36

Side view

Top view

Quick detection with 360° detectionarea regardless of temperature.

Side view

Top view

12 m

12 m

12 m

12 m

12 m

12 m

Your advantages

• HF sensor wall and ceiling light

• Detection of smallest movements of the moving person even without ‘free visibility’

• Pleasant design without visible sensor

• Adjustable time, light value and reach controls

• Switching of the lighting according to requirements; saves current and energy costs

• Ideal in corridors, staircases, vestibules and garages, etc.

Your advantages







approx. 1000 mW < 1 mW

The HF ceiling lightsends out a signalrequiring less than 1 mW and thus emits1000 times less than a conventional mobilephone! approx. 1000 mW < 1 mW

The HF ceiling lightsends out a signalrequiring less than 1 mW and thus emits1000 times less than a conventional mobilephone!

The HF ceiling light is high-tech with anappealing design, quick response time,and saves energy costs.

The HF ceiling light is high-tech with anappealing design,quick response time,and saves energycosts.


Fig. Similar Fig. Similar

HF-Blanco

HF-Deko

120 W3 x 40 W

80 W2 x 40 W

NEW 08


The Cerc Lamp 360 PL and 360 E models


Cerc lamp 360 PL white 2710 65.00

Cerc lamp 360 E white 2720 65.00

Ceiling Lights

Cerc Lamp 360 PL and 360 EFlat sensor ceiling lights

Cerc lamp 360 PLNominal voltage: 230 V, 50 HzSwitching capacity: 2 x 9 W (G-23) (excl.)Detection area: 360° max 4 m radiusTwilight controller: 5 - 300 luxTime controller: 20 secs - 10 minsDimensions: 290 mm Ø x 90 mmFor indoor mounting only3 year warranty

Cerc lamp 360 ENominal voltage: 230 V, 50 HzSwitching capacity: max 3 x 40 W (E 14) (300 W) (excl.)Detection area: 360° max 4 m radiusTwilight controller: 5 - 300 luxTime controller: 5 secs - 15 minsDimensions: 300 mm Ø x 130 mmFor indoor mounting only3 year warranty

39

Sensor Lights Ceiling and Wall Lights

38

Cerc Lamp 360PL

Cerc Lamp 360E

Side view

max 8 m

max

8 m Top view

Your advantages







Your advantages

• Motion detector with 8 m detection area, also applicable outdoors

• Brilliancy 2 x 9 W PL or 3 x 40 W E

• Detection angle 360° with exit angle 110°

• Quick and simple installation

• Also suited for outdoor mounting

Properties/Assembly

The sensor ceiling lights are suited for the lighting controlaccording to requirements, in vestibules, cellars, garages, WCs,etc. The light is reliably switched on, and the follow-up time canbe set via the time controller, and the response threshold via thelux controller. Due to its PL lights, the Cerc Lamp PL is particu-larly suited for rooms in which the light stays switched on for alonger period and where the on/off switching frequencies arenot very high. The Cerc Lamp E is ideal if quick turn-on timesare desired in corridors and halls.

HF Quad 160 W or 80 WHF Quad 160 WNominal voltage: 230 V – 50 HzFrequency range: 5.8 GHzIlluminant: 2 x 40 W, E14 (excl.) / 4 x 40 W, E14 (excl.)Detection area: 360° /12 m, 6 m radiusMounting height: approx. 2 m - 3 m or wall installationLight controller: approx. 10 - 2000 luxTime controller: approx. 8 secs - 12 minsTemperature: -10° C to +55° CProtection class: IP 20, I, CEDimensions: 460 mm x 460 mm x 70 mm320 mm x 250 mm x 65 mm3 year warranty

HF SlimNominal voltage: 230 V – 50 HzFrequency range: 5.8 GHzIlluminant: 2 x 40 W, E14 (excl.) Detection area: 360° / 12 m, 6 m radiusMounting height: approx. 2 m - 3 m or wall installationLight controller: approx. 10 - 2000 luxTime controller: approx. 8 secs - 12 minsTemperature: -10° C to +55° CProtection class: IP 20, I, CEDimensions: 600 mm x 130 mm x 95 mm3 year warranty

Properties/AssemblyThe HF ceiling light switches the lighting on and off automati-cally, depending on motion and daylight. Due to its high-fre-quency technology, the integrated sensor reacts to smallestmovements of the moving person even without ‘free visibility’.The HF ceiling lights are mainly suited for interior rooms and,compared with conventional lights, they reduce current con-sumption and save on energy costs.


Top view


max

12

m

max 12 m

Side view

max 8 m

HF Quad 160 W

HF Quad 80 W

HF Slim

The HF Quad 160 W / 80 W and HF Slim models


HF Quad 160 W 2739 150.00

HF Quad 80 W 2738 96.00

HF Slim 2731 90.00

max 12 m

NEW 08


The Post-Tec 200 Cove and Co-Tec 360 models


Post-Tec 200 Cove, stainless steel 2547 130.00

Co-Tec 360 opal, stainless steel 2489 110.00

Corner socket, stainless steel 9867 10.00

Stainless Steel Sensor Lights

Post-Tec 200 Cove undCo-Tec 360Modern stainless steel post light with a detection area of 200° and lamp for wall installation with a detection area of 360°.

Post-Tec 200 CoveNominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27) (excl.)Parallel switching capacity: 1000 W / 250 VADetection area: 200°/8 mReach controller: 3 – 8 m front, 2 – 6 m sideTime controller: 5 secs - 5 minsProtection class: IP 44 splash-proof Dimensions: 845 mm x 100 mm Ø x 200 mm3 year warranty

Co-Tec 360Nominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27) Parallel switching capacity: 1000 W / 250 VADetection area: 360° / 16 m ØTwilight controller: 15 – 2000 luxTime controller: 10 secs - 12 minsProtection class: IP 44 splash-proof Dimensions: 350 mm x 100 mm x 170 mm3 year warranty

IP44

IP44

41

Post-Tec 200 Cove

Co-Tec 360

200°

Sensor Lights Stainless Steel

40

The Globe-Tec 360 clear and opal / Co-Tec 360 opal / Ruby-Tec 360 models


Globe-Tec 360 opal, stainless steel 2481 110.00

Globe-Tec 360 clear, stainless steel 2480 110.00

Co-Tec 360 opal, stainless steel 2489 110.00

Ruby-Tec 360 stainless steel 2485 110.00



Globe-Tec 360 Clear and OpalPremium stainless steel wall lights with 360° sensor

Globe-Tec 360 clear / opalNominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27) (excl.)Detection area: 360° / 16 m ØTwilight controller: 15 - 1000 luxTime controller: 10 secs - 12 minsProtection class: IP 44 splash-proof Dimensions: 400 mm x 200 mm x 210 mm3 year warranty

IP44

opal

clear

Co-Tec 360

Ruby-Tec 360

Your advantages

• Setting of time, lux and reach values at the push of a button

• Time, lux and reach controllers also adjustable manually• Stainless steel light with 360°/ 16 m Ø detection area• Corner installation with additional corner socket possible• Simple connection with 2-screw mounting• CE, IP44 for outdoor mounting

Co-Tec 360 / Ruby-Tec 360Premium stainless steel wall lights with 360° sensor

Co-Tec 360 / Ruby-Tec 360Nominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27) (excl.)Detection area: 360° / 16 m ØTwilight controller: 15 - 1000 luxTime controller: 5 secs - 5 minsProtection class: IP 44 splash-proof Dimensions Co-Tec: 350 mm x 100 mm x 170 mmDimensions Ruby-Tec: 420 mm x 100 mm x 170 mm3 year warranty

IP44

Your advantages

Post-Tec 200 Cove

• Massive stainless steel post light with integrated 200° motion detector

• Holiday, time, lux and reach controllers

• Premium stainless steel with robust glass

• Different glasses attachable

• Garden light IP44, splash-proof for outdoor mounting

Co-Tec 360

• The stainless steel sensor light Cove-Tec with 360° / 16 Ø m detection area

• Holiday, time, lux and reach controllers


• Different glasses attachable


Side view

Post-Tec

2,5m

approx. 200°/ 8 m

Co-Tec 360Front view

16 m

Side view

2,5m

approx. 200°/ 8 m

Socket for corner installationItem no 9867

Replacement glass for:

Globe-Tec 360 clear Item no 10002Globe-Tec 360 opal Item no 10001Co-Tec 360 opal Item no 10028Ruby-Tec 360 opal Item no 10005

optional optional

1 m

Socket for corner installationItem no 9867Replacement glass for Co-Tec 360 opalItem no 10028


2,5m1 m2,5m1 m

The Post-Tec 200 and Ruby-Tec 200 models


Post-Tec 200 Ruby, stainless steel 2545 130.00

Ruby-Tec 200, stainless steel 2205 120.00


Stainless Steel

Post-Tec 200 Ruby undRuby-Tec 200Premium stainless steel wall and post light with 200° sensor

Post-Tec 200 RubyNominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27), 18 W PL, 23 W PLParallel switching capacity: 1000 W / 250 VADetection area: approx. 200°Reach controller: 3 – 8 m front / 2 – 6 m sideTwilight controller: 5 – 1000 luxTime controller: 5 secs - 5 minsProtection class: IP 44, splash-proof Dimensions: 850 mm x 100 mm x 200 mm3 year warranty

Ruby-Tec 200Nominal voltage: 230 V, 50 HzSwitching capacity: 18 W, 23 W PL (E27)Parallel switching capacity: 1000 W / 250 VADetection area: approx. 200°Reach controller: 4 – 12 m front / 2 – 6 m sideTwilight controller: 5 – 1000 luxTime controller: 5 secs - 5 minsProtection class: IP 44, splash-proof3 year warranty

IP44

IP44

43


42

Post-Tec 200 Ruby

Ruby-Tec 200

The Post-Tec 200 and Ball-Tec 200 models


Post-Tec 200 Ball, stainless steel 2540 140.00

Ball-Tec 200, stainless steel 2200 130.00


Post-Tec 200 Ball undBall-Tec 200Premium stainless steel wall and post light with 200° sensor

Post-Tec 200 BallNominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27) Parallel switching capacity: 1000 W / 250 VADetection area: approx. 200°Reach controller: 3 – 8 m front / 2 – 6 m sideTwilight controller: 5 – 1000 luxTime controller: 5 secs - 5 minsProtection class: IP 44 splash-proof Dimensions: 850 mm x 200 mm x 200 mm3 year warranty

Ball-Tec 200Nominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27) Parallel switching capacity: 1000 W / 250 VADetection area: approx. 200°Reach controller: 4 – 12 m front / 2 – 6 m sideTwilight controller: 5 – 1000 luxTime controller: 5 secs - 5 minsProtection class: IP 44 splash-proof Dimensions: 480 mm x 200 mm x 240 mm3 year warranty

IP44

IP44 Premium and top quality!4 controllers!

Post-Tec 200 Ball

Ball-Tec 200

Your advantages

Post-Tec 200 Ball• Massive stainless steel post light with integrated

200° motion detector• Time, lux and reach controllers• Additional switching output for connection of further lights• Premium stainless steel with robust glass• Garden light IP44, splash-proof for outdoor mounting

Ball-Tec 200• The stainless steel sensor light Ball-Tec with 200° /

12 m detection area• Massive stainless steel light with adjustable detection area• 4 controllers behind a folding lens holder• Holiday controller for continuous lighting and presence

simulation• Corner installation with additional corner socket possible• Simple connection with 2-screw mounting

Your advantages

Post-Tec 200 Ruby• Massive stainless steel post light with integrated

200° motion detector• Time, lux and reach controllers• Additional switching output for connection of further lights• Premium stainless steel with robust glass• Garden light IP44, splash-proof for outdoor mounting

Ruby-Tec 200• The stainless steel sensor light Ruby-Tec with 200° /

12 m detection area• Massive stainless steel light with adjustable detection area• 4 controllers behind a folding lens holder• Holiday controller for continuous lighting and presence

simulation• Corner installation with additional corner socket possible• Simple connection with 2-screw mounting

Socket for corner installationItem no 9867Replacement glass forPost-Tec 200 RubyItem no 10005Replacement glass forRuby-Tec 200 Item no 10007 (plastics)

Premium and top quality!4 controllers!

200°

Post-Tec 200 BallFront view

Ball-Tec 200Top view

approx. 200°/ 6 m

Side view

200°

Post-Tec 200 RubyFront view

approx. 200°/ 6 m

Side view

Ruby-Tec 200Top view

Socket for corner installationItem no 9867Replacement glass for Post-Tec 200 BallItem no 10008


45

The Kube-Tec 360 and Lan-Tec 360 models


Kube-Tec 360 stainless steel 2008 95.00

Lan-Tec 360 stainless steel 2006 95.00


44

Kube-Tec 360 andLan-Tec 360Premium stainless steel wall light with 360° sensor

Kube-Tec 360Nominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27)Parallel switching capacity: 1000 W / 250 VADetection area: 360°Reach: max 16 m / 6 m – 8 m side,

depending on heightMounting height: approx. 1.8 m – 3 m wallTwilight controller: 5 – 1000 luxTime controller: 5 secs - 5 minsProtection class: IP 44, splash-proof Dimensions: 350 mm x 230 mm x 110 mm3 year warranty

Lan-Tec 360Nominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27)Parallel switching capacity: 1000 W / 250 VADetection area: 360°Reach: max 16 m / 6 m – 8 m side,

depending on heightMounting height: approx. 1.8 m – 3 m wallTwilight controller: 5 – 1000 luxTime controller: 5 secs - 5 minsProtection class: IP 44, splash-proof Dimensions: 350 mm x 220 mm x 100 mm3 year warranty

IP44

IP44

Real 360° detection area with 3 pyrodetectors!

max 16 m

Kube-Tec 360

Lan-Tec 360

Sensor Lights

Your advantages

• Shapely, flat stainless steel lights for outdoors

• Time, lux and reach controllers

• 360° / 8 m detection area, monitoring of 16 m house front possible


• Bulb holder directed upwards; prevents short circuits through illuminants


Premium and top quality!Real 360ºdetection area!

The Globe Lamp 200 clear and opal models


Globe lamp 200 clear white 2320 65.00

Globe lamp 200 clear black 2310 65.00

Globe lamp 200 opal white 2340 65.00

Globe lamp 200 opal black 2330 65.00

Globe Lamp 200 clear and opalWall sensor light with 200° detection area

Globe lamp 200Nominal voltage: 230 V, 50 HzSwitching capacity: 60 WParallel switching capacity: 1000 W / 250 VADetection area: 200° / max 12 mAdjustable: 160° horizontally / 60° verticallyTwilight controller: 5 – 300 luxTime controller: 5 secs - 5 minsProtection class: IP 44, splash-proof Dimensions: 250 mm x 200 mm x 170 mm3 year warranty

IP44

black opal

white clear

Your advantages

• Pivoted and inclinable 200° / 12 m detection area

• Additional clip as lens blind for exact restriction of thedetection area

• Elegant assembly with snap fits

• Time and lux controllers

• Casing made of robust polycarbonate

• Switch-on of the sensor via external break switch possible (2 secs power failure)

• CE, IP44 for indoor and outdoor mounting


200 degree monitoring,adjustable horizontally andvertically. With possibility of parallel connection, additional load up to 1000Watt, pushbutton function.

Globe lamp 200Top view

Replacement glass clear for globe lamp 200 Item no 10002Replacement glass opalfor globe lamp 200 Item no 10001


Post Lights

47

Sensor Post Lights

46

The Aluminium Lantern 200 and Post Lantern 200 models


Aluminium lantern 200 white 2220 70.00

Aluminium lantern 200 black 2210 70.00

Post lantern 200 white 2530 95.00

Post lantern 200 black 2535 95.00

Aluminium Lantern 200 andPost Lantern 200Wall post sensor light with 200° detection area

Aluminium lantern 200Nominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27)Parallel switching capacity: 1000 W / 250 VADetection area: 200°Reach: max 12 m Mounting height: approx. 1.8 – 3 m wallTwilight controller: 5 – 1000 luxTime controller: 5 secs - 5 minsProtection class: IP 44 splash-proof Dimensions: 420 mm x190 mm x 200 mm3 year warranty

Post lantern 200Nominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27)Parallel switching capacity: 1000 W / 250 VADetection area: 200°Reach: approx. 6 m frontTwilight controller: 5 – 1000 luxTime controller: 5 secs - 5 minsProtection class: IP 44 splash-proof Dimensions: 1100 mm x 400 mm x 200 mm3 year warranty IP44

IP44

Premium and top quality!

Post Lantern 200

Aluminium Lantern 200 Your advantages

Aluminium Lantern 200

• Decorative 60 W lantern black or white

• Pivoted and inclinable 200°/ 12 m detection area

• Additional clip as lens blind for exact restriction of the detection area

• Simple assembly with external screws


• Timer activation via external break switch possible (power failure)

• Casing made of robust aluminium, sensor of polycarbonate


Post Lantern 200

• Massive post light with 200° motion detector


• Additional switching output for the connection of further lights


• Robust aluminium with glass

• Decorative

• Casing made of robust aluminium, sensor of polycarbonate


The Garden Ruby and Garden DC 180 models


Garden Ruby white 2620 90.00

Garden Ruby black 2610 90.00

Garden DC 180 white 2520 90.00

Garden DC 180 black 2510 90.00

Garden Ruby undGarden DC 180Garden lights with 200° detection area

Garden RubyNominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27)Parallel switching capacity: 1000 W / 250 VADetection area: approx. 200°Adjustable: approx. 2 – 6 m frontTwilight controller: 5 – 300 luxTime controller: 5 secs - 5 minsProtection class: IP 44, splash-proof Dimensions: 900 mm x 200 mm x 100 mm3 year warranty

Garden DC 180Nominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27)Parallel switching capacity: 1000 W / 250 VADetection area: approx. 200°Adjustable: approx. 2 – 6 m frontTwilight controller: 5 – 300 luxTime controller: 5 secs - 5 minsProtection class: IP 44, splash-proof Dimensions: 900 mm x 200 mm x 200 mm3 year warranty IP44

IP44

Garden DC 180

Garden Ruby

Your advantages

• Massive and decorative post light with integrated motion detector

• Detection area approx. 200°/6 m



• Additional switching output for connection of further lights

• Robust aluminium with glass


200°

Garden DC 180Garden Ruby

Side view

2,5m1 m

approx. 200°/ 6 m


200 degree monitoring,adjustable horizontally andvertically. With possibility of parallel connection, additional load up to 1000Watt, pushbutton function.

Alu lantern 200Top view

Replacement glass for RubyItem no 10005Replacement glass for Garden Item no 10050


2,5m1,8 m

Sensor Lights

49

Sensor Post Floodlight

48

The Sensor Floodlight 500/200, 500 W with Stand model


Sensor floodlight 500 W with stand 1270 60.00

Sensor Floodlight 500 W with Stand and180° Motion DetectorSensor floodlightNominal voltage: 230 V, 50 HzSwitching capacity: 150 W (400 W) (halogen)Detection area: approx. 180° / 12 mAdjustable: 300° horizontally / 90° verticallyTwilight controller: approx. 5 – 300 luxTime controller: approx. 5 secs - 5 minsProtection class: IP 44, splash-proof Dimensions: 125 mm x 1200 mm to 1800 mmHalogen lamp: 500 W (incl.)3 year warranty

Mobile Automatic Light

The mobile automatic light is ideal for building sites, garages,crafting rooms or in gardens. It switches the light on automati-cally on dangerous steps or building sites and can be applied inthe next place after finishing work. This is safety made flexible.

Your advantages

• 500 W sensor floodlight with large detection area

• Reach approx. 12 m, detection angle 180°

• Time, light and reach controllers

• Adjustable height, 1.2 m – 1.8 m

• Waterproof IP54

180

approx. 180°/ 12 m

Side view

The Bulpir BH-1 and Bulpir BH-2 models


Bulpir BH-1 white 2020 30.00

Bulpir BH-1 black 2010 30.00

Bulpir BH-2 black 2030 30.00

Bulpir BH-1 und Bulpir BH-2Wall lights with 110° detection area

Bulpir BH-1Nominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27)Detection area: approx. 110° / 7 mAdjustable: 160° horizontallyMounting height: between 1.5 m and 2.5 m on the wallTwilight controller: 5 – 300 luxTime controller: 5 secs - 5 minsDimensions: 250 mm x 110 mm x 110 mm3 year warranty

Bulpir BH-2 with dimmer functionNominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27)Detection area: approx. 110° / 7 mAdjustable: 160° horizontallyMounting height: between 1.5 m and 2.5 mBase light: 15 W (fixed as from twilight)Twilight controller: 5 – 300 luxTime controller: 5 secs - 5 minsDimensions: 250 mm x 110 mm x 110 mm3 year warranty

IP44

IP44

Bulpir BH-1

Bulpir BH-2

Your advantages Bulpir BH-1

• 60 W sensor lights with pivoted 110°/7 m detection area

• BH-1 available in black and white, BH-2 in black


• For 60 W and max 75 W bulb


BH-2 with dimmer function!

• 60 W sensor light with pivoted 110°/7 m detection area, standlight approx. 15 W, full light output approx. 60 W

• With continuous lighting for orientation from twilight

• Suitable as house number light, numbers available

• Max 75 W bulb applicable


12With dimmerfunction!

ca. 110˚ /12m

2,5m ca. 60˚

approx. 110°/ 7 m

Bulpir BH-1

Bulpir BH-2

IP54


Sensor Floodlight

51

The Pro 500/3000 IR and Pro 150/3000 IR models


Pro 500/3000 IR black 1285 140.00

Pro 500/3000 IR white 1280 140.00

Pro 150/3000 IR black 1295 130.00

Pro 150/3000 IR white 1290 130.00



Your advantages


• Optional mini hand-held transmitter On/Off/Automatic• Flat installation on a cover plate or wall installation on an

exposed socket• Detection 180° horizontally, 90° vertically, mounting at

1– 5 m height• Test function with PIR hand-held transmitter• Programming stays intact in case of power failure• ON/OFF/AUTO and holiday function etc. via PIR hand-held

transmitter• New high-performance relay• Special robust floodlight










Trial run


Holiday programs



Side view

Top view



200° horizontally + 360° creep zone protection

NEW 08

Pro 500/3000 IR +Pro 150/3000 IRRemote controllable sensor floodlights

Nominal voltage: 230 V / 50 HzSwitching capacity: 500 + 1800 Watt / 10A ohmic (cos ϕ 1,0)

150 + 2150 Watt / 10A ohmic (cos ϕ 1,0)Detection area: 200° horizontally + 360° creep zone protectionMounting height: approx. 2m – 5 mReach: approx.14 m front and approx. 7 m sidewise,

Ø 5m creep zone protectionTwilight controller: 5 – 2000 LuxTime controller: short duration pulse or 10 secs to 12 minsProtection class: IP 54 Splash-proof / class IITemperature range: -30° C to + 50° CDimensions 500/3000: 215 mm x 270 mm x 140 mmDimensions 150/3000: 140 mm x 175 mm x 115 mm3 year warranty

Properties/Assembly

The sensor floodlights are installed at a height of 2–5 m. Settings are done via the PIR hand-held transmitter and switch-on /switch-off can also be carried out with the mini hand-held transmitter!

CLICK !The Swiss Garde 3000 IR is simplyclicked onto the floodlight!

Click !

IIPP5544

Pro 150/3000 IR

Pro 500/3000 IR

The Homelite model


Homelite white 2060 35.00

Homelite black 2050 35.00

HomeliteWall light with 90° detection area

Nominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27)Detection area: approx. 90° / max 8 mAdjustable: fixedMounting height: approx. 1 – 2 mTwilight controller: 10 – 300 luxTime controller: 20 secs - 10 minsDimensions: 250 mm x 100 mm x 100 mm3 year warranty

IP44

Sensor Lights

50

Your advantages

• 60 W sensor lights with approx. 90°/ 8 m detection area

• Available white or black


• Simple and quick assembly


ca. 90˚ /12m

2m

90°

approx. 90°/ 8 m


Sensor Floodlight

52

500 W

Floodlights and LightsFloodlights and Lights without sensor

1. Extensive frame for

maximum cooling

2. Stainless steel screws for

optimum weather resistance

3. Premium illuminant for

long life

1

2

3

Twilight Switch PC 24With Integrated TimerNominal voltage: 220 / 240 V ACSwitching capacity: 2000 W / 10 A Twilight controller: approx. 5 – 300 luxDead time on/off: approx. 60 secsDead time: 2, 4, 6, 8 hrs, or twilightDimensions: 74 mm x 95 mm x 45 mmTemperature range: -30 to +50 °C3 year warranty

Item no 7520

60 W-BlancoSwitchable in Parallel

with HF Blanco !

150 W

The Pro 500/ 140 / Pro 150/180 models


Pro 500/140 white 9812 18.00

Pro 500/140 black 9810 18.00

Pro 150/180 white 1265 15.00

Pro 150/180 black 1255 15.00

Pro 500/140 / Pro 150/180Sensor Floodlight with 140°+180° Detection Area

Pro 500/140Nominal voltage: 230 V, 50 HzSwitching capacity: 500 W (900 W) Detection area: approx. 140° / 12 mAdjustable: 300° horizontally / 90° verticallyTwilight controller: approx. 5 – 300 luxTime controller: approx. 5 secs - 5 minsHalogen lamp: 500 W incl.Dimensions: 200 mm x 270 mm x 200 mm3 year warranty

Pro 150/180Nominal voltage: 230 V, 50 HzSwitching capacity: 150 W (400 W) Detection area: approx. 180° / 12 mAdjustable: 300° horizontally / 90° verticallyTwilight controller: approx. 5 – 300 luxTime controller: approx. 5 secs - 5 minsHalogen lamp: 150 W incl.Dimensions: 125 mm x 170 mm x 100 mm3 year warranty

IP54

IP54

Pro 150/180

Your advantages

• Competitive sensor floodlight

• Pivoted and inclinable 140°+180° / 12 m detection area (6 m each side)


• Casing of sensor made of polycarbonate

• CE, IP44 for outdoor mounting

Pro 500/140

180

Pro 500/140 Pro 150/180

2,5m

approx. 180°/ 12 m

Side view

approx. 140°/ 12 m

Side view

NEW 08


Lights and Floodlights without Sensor

54

Description Item no Price Euro Replacement glass

Floodlight 1000 W white 9083 30.00

Floodlight 1000 W black 9082 30.00

Floodlight 500 W white 8060P 20.00

Floodlight 500 W black 8050P 20.00

Floodlight 300 W white 8520 15.00

SFloodlight 300 W black 8510 15.00

Floodlight 150 W white 8120P 15.00

Floodlight 150 W black 8110P 15.00

Floodlight 500 W portable 8210 12.00

Floodlight 150 W portable 8310 10.00

Floodlight 500 W stand 8420 30.00

Post Ball post light 8972 100.00 10008

Post Ruby post light 8982 100.00 10005

Socket for corner installation 9867 10.00

Garden Light 90 globe clear, white 8920 70.00 10050

Garden Light 90 globe clear, black 8910 70.00 10050

Garden Light 90 Ruby, white 8960 80.00 10005

GGarden Light 90 Ruby, black 8950 80.00 10005

Globe-Tec 8775 45.00 10002

Ruby-Tec 8770 45.00 10005

Longlite white 8620 10.00

Longlite black 8610 10.00

60 W-Blanco 8650 19.50

Floodlight 300 Watt

Nominal voltage: 230 V, 50 HzSwitching capacity: 300 W Protection class: IP 23Halogen lamp: 300 W (incl.)Dimensions: 170 x 215 x 60 mm3 year warranty

Floodlight 150 Watt


Floodlight 1000 Watt


Floodlight 500 W / 150 W portable

Nominal voltage: 230 V, 50 HzSwitching capacity: 500 W / 150 W Protection class: IP 44Cable: H05.-RNF approx. 2 mHalogen lamp: 500 W / 150 W (incl.)3 year warranty

Floodlight 500 W stand

Nominal voltage: 230 V, 50 HzSwitching capacity: 500 WProtection class: IP 44Height: 1.2 – 1.8 mCable: H05.-RNF approx. 2 mHalogen lamp: 500 W (incl.)3 year warranty

Floodlight 500 Watt


Garden Light

Nominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27)Protection class: IP 44Dimensions: approx. 900 x 200 x 200 / 100 mm3 year warranty

Post Lamp Ball+Ruby

Nominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27)Protection class: IP 44Dimensions: 850 x 200 x 200 / 100 mm3 year warranty

Longlite

Nominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27)Protection class: IP 44Dimensions: 250 x 100 x 100 mm3 year warranty

Ruby-Tec

Nominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27), 18 W, 23 W PLProtection class: IP 44Dimensions: 480 x 100 x 210 mm3 year warranty

Socket for corner installation for Globe-Tec, Ruby-Tec and various lights with sensor

IP54

IP54

IP54

IP54

IP54

IP44

IP44

IP54

IP44

IP44

Socket for corner installation for Globe-Tec, Ruby-Tec and various lights with sensor

60 W-Blanco

Nominal voltage: 230 V - 50 HzIlluminant: 60 W E27 (excl.)Protection class: IP20, Klasse II, CEDimensions: 300 mm Ø x 100 mm3 year warranty

IP20

IP44

NEW 08

NEW 08


Globe-Tec

Nominal voltage: 230 V, 50 HzSwitching capacity: 60 W (E27)Protection class: IP 44Dimensions: 480 x 200 x 220 mm3 year warranty

Installation examples Page

Installation examples 2 + 3: garages and multi-storey car parks 56

Installation examples 4 + 5: wet rooms and toilets 57

Installation example 6: corridors and halls 58

Installation example 7: staircases 59

Installation example 8: warehouses 60

Installation example 9: schoolrooms 61

Installation Swiss Garde MZ 5000: interactivity 62

Installation examples 10 + 11: multi-storey car park / warehouse with MZ 5000 63

MiscellaneousHigh-performance relay for electronic control gears, FL and PL lamps 64

Short duration pulse function 64

Assembly of presence and motion detectors 65

Disturbance sources and trouble shooting 66

Accessories 67

Connection diagrams 68–69

Table of contents

55

56 57

Garages and multi-storey car parksDue to the lighting in garages and multi-storey car parks beingnecessary only temporarily and in certain areas, the savings potential is particularly high. Please note for your planning: Avoidinstallation of the motion detectors directy above the vehiclebonnet. The engine heat can lead to small turbulences whichcould trigger a switching pulse in the motion detector.2. The entrances and the staircase and lift accesses should belocated within a close-up range of the sensor. We recommendthis to be within a 5 m range. The Swiss Garde Premium is ideal for monitoring larger surfaces,such as in multi-storey car parks, etc. Position the motion detec-tor in a way so as not to allow persons or cars to approach it directly. This would otherwise lead to a decrease of the reach.If more than 4 detectors are switched in parallel, we recommendto use the short duration pulse function model which is providedwith a time switch.On using the Swiss Garde 360 Premium we recommend, if everpossible, to monitor the car park area within a 12 m detectionarea, as sometimes only small movements occur in there over alonger period. Within the cruising range, the distance to the nextmotion detector can well even be 16 m!

Installation examples 4 + 5 Swiss GardeInstallation examples 2 + 3 Swiss Garde

ToilettenIn wet rooms and toilets little light is used.The current saving potential is therefore particularly great.Please note: The entry must be located within the closer-updetection area of the motion detector.Avoid any mirrors within the closer-up detection area of thesensor. This could lead to disturbances in conjunction with the lighting. If this is the case, cover the respective lens partwith a blind.Ventilators close to the motion detectors can lead to draught leading in turn to an undesired switch-on of the light. Place thedevice within sufficient distance from the ventilator and insertthe gasket for concealed installations.Make sure that the toilet cubicles are located within the detec-tion area also. For this, ceiling motion detectors would be high-ly recommended.

Lux measurement test (rooms with windows)In various light measurements at the ceiling, approx. 20 luxwere measured for dark or black floors, respectively, and ap-prox. 50 lux for white floors, all against the same natural expo-sure to light. Set the twilight controller to the minimum of 5 – 10lux for white floors!

SG 360 Concealed Plus

SG 360 Concealed Plus KI

approx. 7.5 m

appro

x. 4 m

Cerc Lamp





1 2 3 4 5 6 7 89


SG 360

Plus KI

approx. 21 m

approx. 10 m

Installation example 3

Installation example 2:

Swiss Garde 360 Premium Installation example 5

Swiss Garde 360 Concealed Plus

Installation example 2: car parkIn order to make the largest possible saving on current, care should be taken in big lighting installations not to connect all lights in parallel.Often enough it is sufficient to switch on a smaller lighting group, as only part of the area is driven in or passed.

In the present case 4 lighting groups were provided for.

Given that each arriving or departing vehicle passes the drives, a small lighting group with a Swiss Garde 360 Premium (max 30 m diameter)was installed, which is switched on permanently. In this case only the left-hand or the right-hand car park half is often used. For this reason3 further lighting groups of Swiss Garde 360 Premiums were provided for, of which one is on the left and the other one on the right. Thestaircase and lift accesses are within a close-up range.

Installation example 5: wet roomsMake sure that free visibility of the motion detector is provided for in wet rooms. The detection applied here above the partition wall crossesis only applicable if the toilet cubicles are not entirely secluded by the partition walls (height of the partition walls up to 2 m max).

In individual secluded cubicles, Swiss Garde 360 Plus or 180 Concealed can be used. Set the follow-up time at the motion detector to atleast 5 – 10 mins, as over certain periods there is only little movement. The movements to be detected in this case are all within close rangeof the motion detector.

appr

ox. 4

m

approx. 7.5 m

Installation example 3:Swiss Garde 360 Premium

2 x Swiss Garde 360 Premium @ Euro 98.–

Total: 196.00 net

Detection area up to 30 m! Switching capacity 3000 W



approx. 4.2 m

appro

x. 3 m



Installationsbeispiel 4

Installation example 4:Swiss Garde 360 Plus

2 x Swiss Garde 360 Plus @ Euro 80.00

Total: 160.00


Installation indoor stadium

At the new indoor stadium, a total of 620 copies of Swiss Garde Presence and 150 copies of Swiss Garde 360 Premium have been installed.

The presence detectors have mainly been installed in lounges and also in rooms with a need for heating and ventilation, while the 360 degree ceiling detectors control the lighting in the corridors.

ca. 2.5 m

ca. 7.2 m

with safety guard with safety guard

T30

Office 16m 2Y30-E-47

30-E-45ELEVATOR

483.50 MuM

TR. KERN 4

30-E-43A

R30 best newly actuatedMotion detector on both sides, possibly in hollow ceiling as well

.

EWI

RECEPTION

30-E-39

OFFICE

30-E-39D

30-E-41

30-E-39C

SECRETARIATE

WINDF.

FLP

F30

INV.30-E-35C

WC H30-E-35A

30-E-31A

CLOAKROOM 75

WC D30-E-37A

T30

CORR

IDO

R

30-E

-39A

30-E

-37B

WC

D.

30-E

-35B

WC

H.

GATE

STORAGE ROOM

30-E-37C

Disabled persons’ shower

Disabled persons’ shower

30-E-23B30-E-27B

VESTIBULEVESTIBULE

30-E-101CORRIDOR

30-E-19A

30-E-19C

SHOWER

CLOAKROOM 75

SHOWER

30-E-23C

30-E-23A

CLOAKROOM 75

30-E-31B

VESTIBULE

30-E-31C

SHOWER

30-E-27C

SHOWER

30-E-27A

CLOAKROOM 75

30-E-32

INDOOR DEVICES THEORY

30-E-20A30-E-22

JANITORIAL ROOM

R30 best newly actuatedMotion detector on both sides, possibly in hollow ceiling as well

30-E-19B

VESTIBULE

SG 360 UP Plus

SG 360 WM

SG 360 UP Premium SG 360 UP Premium

48.5 m

20.0

m

5.0m

5.0m 10.0m 15.0m

Swiss Garde 360 Premium Concealed Swiss Garde 360 Plus

Swiss Garde 360 Wall Installation

Installation example 7 Swiss Garde

59


58

Corridors and hallsCorridors and halls are transit places in which the operation ofthe light is often forgotten about. The saving potential is there-fore great. Please note: Entries and exits and also lift and staircases accesses must belocated within close range. For long corridors without doors onthe sides a detection gap in between would do no harm.Front detection in case of direct approach reduces the reach byover 50 %. If ever possible, allow for the sensor to be shiftedsideways to the walking direction.For larger installations we recommend the application of theshort duration pulse function or the switching of several groupswith max 4 motion detectors in parallel.

Halls and corridors

Please note: In halls and corridors of over 12 m length we rec-ommend to apply a motion detector at the beginning and at theend of the corridor.Such installation proves itself better than a motion detector inthe middle, particularly if any doors lead into the corridor at thebeginning and at the end.Use a Swiss Garde MZ 2000 above the door at the corridor beginning and end, or a Swiss Garde 360 Wall Installation Con-cealed for perfect elegance. In this, make sure that the motiondetector is provided for in the middle above the door or, evenbetter, at the opening side above the door, and never at the sideof the door hinge!

Installation example 6Use a Swiss Garde 360 Premium Concealed for 1b, c and 1d.These ceiling motion detectors can be installed concealed or ex-posed, and they are in this case combined with a Swiss Garde180 Concealed for wall installation at a height of the manual con-trol switch for 1a.

With the wall switch, you can keep as an option in special casesto switch the light on or off entirely with the manual controlswitch of the Swiss Garde 180 Concealed.The manual control switch of the Swiss Garde 180 Concealedcan be locked and, according to requirements, be made to beoperated by certain persons only.

Motion detector at the height of the manual control switch

As detection at the height of the manual control switch is basical-ly weaker, we recommend to provide for an additional concealeddetector every 8 m in a long corridor, as lateral detection is re-duced every time to approx. 4 m in case of direct approach.


2 x Swiss Garde 360 Premium Concealed @ Euro 98.00

1 x Swiss Garde 360 Plus @ Euro 80.00

Total: 276.00 net

StaircasesLighting control in staircases is mostly effected via an externaltime relay. For optimum control of the time relay we recommendto use the short duration pulse function. Please note:The entries to the staircase must be within close range (within 5m) of the detector. In case of several floors we recommend toswitch in parallel max 2 floors with 4 motion detectors.In staircases, wall or ceiling detectors can be used. As there arenumerous and quick movements, a concealed detector at theheight of the pushbutton before the entry or exit, respectively, ofthe stairs will be sufficient in most cases.Due to the difference in height, ceiling motion detectors, such asthe Swiss Garde 360 Premium, are suited for large staircaseswith mezzanines.


Swiss Garde 360 Wall Installation

Swiss Garde 360 Premium

2 x Swiss Garde 360 Wall Installation @ Euro 80.00

2 x Swiss Garde 360 Premium @ Euro 98.00

Total: 356.00

Installation example 7

1c.

ca. 7.2 m

ca. 1

0.8

m

Swiss Garde 180 WM

Swiss Garde 180 WM





61


60

Warehouses and high rack warehousesIn warehouses, detection between the storage racks or thestored products is primarily solved by a device with a small de-tection angle or detection at one level. For wall installation, werecommend to apply the Infra Garde 140° Plus or the SwissGarde MZ 2000 with a mono lens.

In case a solution with ceiling installation is desired, the maxi-mum mounting height should not exceed 6 m, as otherwise toomany detection gaps might occur. For this, we recommend touse the Swiss Garde 360 Premium with a large 30 m detectionarea, or the Swiss Garde MZ 2000 with mono lens.

Set up different lighting groups with one connection in parallel,as often the light in parts of the warehouse is used not at all oronly a little. With the new Swiss Garde MZ 5000 you can switchin parallel different lighting groups flexibly and thus achieve opti-mum saving of energy savings! (see p. 78)

In small and not very clearly arranged warehouses we recom-mend an HF motion detector. It also watches ‘around the cornerand switches the light on if free visibility is obstructed by manystored products.

Installations example 8:

4 x Swiss Garde MZ 5000 @ Euro 130.002 x Bidi Module @ Euro 25.00

1 x Swiss Garde 360 Premium Euro 98.001 x Swiss Garde 360 Premium Concealed @ Euro 98.00

Total: 766.00

SchoolroomsIn order to detect the small movements produced by sitting per-sons in schoolrooms, presence detectors are used exclusively. Toachieve optimum energy saving, the Swiss Garde 360 Presencecan be set to fully automatic. In this, the light must be operatedvia the On/Off manual switch as usual. The light will, however, beswitched off if someone forgets to switch it off by hand.

The Swiss Garde 360 Presence as a ‘fully automatic machine’switches the light on automatically in case there is not enoughnatural light available. The fully automatic machine can also beactivated manually via the R-terminal with a make contact switch.After that, the set follow-up time at the presence detector expiresand the light is switched off in case there is no more movementaround.

According to requirements, the Swiss Garde 360 Presence Mini orthe Infra Garde 360 Presence (Exposed) can also be applied.


3 x Swiss Garde 360 Presence @ Euro 125.00

Total: 375.00

Swiss Garde 360 PlusItem no 25000

Swiss Garde 360 PremiumItem no 25050

Swiss Garde 360 Premium Concealed

Item no 25060

Swiss Garde 360Presence MiniItem no 2548

Infra Garde360 PresenceItem no 3505

Swiss Garde360 PresenceItem no 2507

2 x Swiss Garde MZ 5000 + Bidi module

= bidirectional and interactive

SG 360 Premium Concealed

SG 360 Premium Concealed

SG MZ 5000+ Bidi module


SG MZ 5000

SG MZ 5000

SG 360 Presence

SG 360 Presence

SG 360 Presence

Presence detector pp. 6-8

(pp. 9-12)

(pp. 13-15)

Swiss Garde MZ 5000 white Item no 26350Bidi module (aerial model) white Item no 26800


Only coupled devices (with 64k possibilies of coded transmitters)can switch on a receiver. If equipped with the bidi module, twoareas that are independent of the fuse groups, can (subsequently)be interconnected.

Installation Swiss Garde MZ5000 Swiss Garde Swiss Garde

62 63

Swiss Garde MZ 5000 BidirectionalThe Swiss Garde MZ 5000 can be extended with a few handmovements by means of the bidirectional function. Remove thecartridge at the back of the sensor head and insert in its place thebidirectional cartridge (with aerial).

(Un-) Installation of a bidi module

Disconnect the detector from the mains before installation. Gently push the locking plate (e.g. with a screw driver) and pullout the cartridge from the detector downwards. Then insert thebidi module from below into the detector until it engages in thesnap fit.

After that your MZ 5000 Bidirec-tional is ready for programming.Press successively the program-ming key at the bidi module andthe one at the control pad (or at another motion detector), then the bidirectional couple is in pro-gramming mode for 5 minutes.

As soon as the MZ 5000 with bidi module and the control padhave each received a signal fromthe counterpart, the couple is initialised. During these 5 minutesprogramming mode, press addi-tionally e.g. the ‘Auto’ key on thecontrol pad and activate the motion detector by stepping intothe detection area.

4 channels are available for coupling, which allow you to link a maximum of 5 devices between themselves via radio.

Upon each command received by the CP, the detectors sendsback an acknowledgement sign (indicated acoustically or optically on the CP).

Bidi moduleProgramming key

Each detector can redirectthe command of its motiondetection to a maximum of4 devices.A repeater function is, however, not possible!

Please note: ensure each time a distance of at least 2 m approxi-mately between radio,transmitter and recei-ver units.

World Novelty:Swiss Garde MZ5000bidirectional + interactive

Swiss Garde MZ 5000 InteractivityThe interactivity between 2 Swiss Garde motion detectors allowswireless connection in parallel even across different fuse groups.

To produce the interactivity, both MZ 5000s must be equipped witha bidi module. After connection of the motion detectors to the 230V mains supply, press the programming keys of the bidi moduleapplied. After that the programming time of 5 minutes will start,during which the two MZ 5000s can be coupled. For the coupling,each one of the two detectors requires a signal from its counter-part, which is done by the detector being switched on (the light be-ing switched on). To this end, activate the respective detector bystepping into the detection area. Switching on the relay effects thebidi module applied sending its specific signal to the other detec-tor, which also works as initialisation.

One-sided initialisation

If activation of both detectors has been carried out, both detectorswill also be switched in parallel, that is, they switch each other on if a movement is detected.If required, a one-sided initialisation can also be effected, so thatonly one of the two motion detectors can switch on the other de-tector. To this end, activate only one of the detectors during the 5 minute programming time by stepping into the detection area,and make sure the second detector cannot send a signal to thefirst one.The first MZ 5000 can now switch one the second one automati-cally, if, however, a person steps into the detection area with thesecond MZ 5000, the first detector will not be switched off.

Wireless and flexible connection in parallel

The light in warehouses, workshops or garages can be controlledoptimally with the flexible interactivity between 2 Swiss Garde MZ5000s.Depending on circumstances, little frequented areas can be pro-vided with separate lighting group to allow this to be switched on ifrequired, while the light in the more frequented area is controlledby several MZ 5000s switched in parallel.In this, the connection in parallel is flexible and can be adjusted ifthe warehouse contents are rearranged. If later on all lights are tobe switched on, the new combination can be set up in a few min-utes. approx. 1000 mW < 1 mW/1Sek

The Swiss Garde MZ 5000 sendsout a signal during a second, that only requires 1 mW. A con-ventional mobile phone emitsabout 1000 times more over thesame time!

By switching off the transmitting function of the bidi module, one-way communication is possible as well, e.g., first detector within theout-side area, second detector in the office. The light in the office is also switched on automatically if someone steps into the detectionarea outside. If the monitored area is stepped into in the office, only the light in the office will be switched on.

The maximum reach is 100 m in the fields. The reach is damped downdepending on local circumstances (such as an interior, depending onbrickwork or ceiling).



Multi-storey car parkOne-sided connection in parallel:The first detector can switch on the second detector through one-sided initialisation, but not the other way round.

Two-sided interactivity:Connection in parallel in a conventional way; in case of movementwithin the detection area, the ‘coupled’ device, along with the direct-ly connected lights, is activated as well! Activation is effected bothways.

WarehouseDifferent groups can be connected wirelessly in parallel via theinteractivity, this across different fuse groups.In this, the connection in parallel is flexible and can be effected one-sidedly or two-sidedly! 4 Swiss Garde MZ 5000s with bidi module can be connected wirelessly in parallel. Each one of the 4 detectors can additionally be connected in parallel with furtherdetectors in a conventional way.

Installation examples 10 + 11


65

Short duration pulse …Technology by ZüblinThe short duration pulse models by Züblin were specially devel-oped to control larger lighting groups via an external time relay(staircase switch or time switch). These devices replace conven-tional illuminated buttons or can be freely combined with thesame.

The use of short duration pulse models has many advan-tages: The relay of the motion detector is being preserved.

In rooms with many movements over longer periods, the relay of the motion detector is activated over many hours. Incase of larger lightings (e.g. many fluorescent lights with highswitch-on current) the heavy load on the relay can shorten itslife. This is not the case with the short duration pulse function.Here, the relay is loaded only every 20 or 60 seconds duringthe short duration period of approx. 1 second, and the life ofthe relay is thus multiplicated.

Retrofitting of well proven installations with a time relay(staircase switch) and illuminated buttons. In anterooms, corridors and staircases, the lighting control via time relay andpushbuttons has proved itself for many years.The combination of pushbuttons with short duration pulse motion detectors has proved itself in an outstanding manner.The switches can be connected in any order in parallel and can be connected to the same time relay (staircase switch,time switch).However, we recommend to connect in parallel only a maxi-mum of 6 Swiss Garde short duration pulses.

Continuous currents harm time relays and time switches.We therefore strongly recommend not to connect any motiondetectors with long follow-up time to the time relay directly.Should this still be necessary, the switched phase of the mo-tion detector should be connected at the output of the timeswitch!With the Swiss Garde and the adjustable pause time, largerlighting controls can be provided optimally through time switch-es or time relays: switching noises are reduced to a minimumand the life of the relay is increased to a maximum!

Disturbance Sources

Control of a time relay via a pulse generator

With a pulse generator, it is possible to connect a standardmotion detector to a time relay. In this, the desired phase andneutral conductor are connected to the pulse relay. In case of activation of the switched phase for the set time, the poten-tial-free contact is closed for approx. 0.3 – 0.8 secs. After apause time of approx. 50 secs, a further pulse is released untilthere is no person left within the detection area of the sensor.Standard motion detectors can be connected to a short dura-tion pulse generator in parallel without any problems. If requi-red, motion detectors with short duration pulse can also beconnected to the output of the generator additionally. Fixed pulse duration=0.3 secs

Pause length selectable from 5 to 50 secs

220V

0VShort dura-tion pulse

Push-button

Machine Light

Connection to staircase switches

Short Duration Pulse

64

InstallationInstallation at a height of 2.5 m

The mounting height of 2.5 m is optimalfor a motion detector within the outsidearea. The metered values indicated wererecorded at an ambient temperature of20 °C against side approach.

Installation instructions

1. The motion detector must be mounted to a fixed wall, as anymovement of the motion detector itself has the same effect as a heat movement within the monitored area.

2. On determining the place and themounting height, the distance from thestreet and neighbouring lots, etc., shouldbe taken into account in order to avoid any unwanted parasitic couplings.(Reaches for trains/trucks up to 50 m!)

3. Installation sideways of the walking direction ensures the safest functon.In case of direct approach, the reach is

partly reduced considerably (to 5 m). As infra-red rays cannotpermeate firm objects, free visibility of the motion detectorshould be ensured.

4. All passive infra-red motion detectors react to rapid changesof the locally present temperature beams.For example, moving raindrops on the lens can deflect the temperature beams, disturb the local conditions and trigger aconnection. All motion detectors should therefore be installed, if ever possible, with a protection against rain, wind and directsolar radiation on installation in order to prevent undesired connections.The casing of the motion detector is, however, sufficientlysplash-proof to allow for the device to be mounted without protection against rain.

2,5 m

Short duration pulse generatorConventional motion detectors can be connected to a time relayvia a short duration pulse generator. Several standard motion de-tectors can be connected in parallel to a pulse generator.

RecommendationWe recommend to connect in parallel only a maximum of 3 – 4motion detectors. From a technical point of view it is perfectlypossible to switch in parallel up to 10 motion detectors or more.In this, however, parasitic couplings, such as high switch-on currents, interferences, etc, are summed up, and in case of mal-function of one or more motion detectors, trouble shooting be-comes very time-consuming. In case of a small and clear swit-ching, the cause is found out quickly.

Activation of Electronic Con-trol Gears, FL and PL LightsElectronic control gears, FL and PL lights generate high inrushcurrents which shorten the lives of the relays integrated withinthe motion detectors. For this reason Züblin applies a specialhigh-performance relay in the Swiss Garde models which carriesout many switchings in spite of high inrush currents. The relaywhich is certified as per EU standards, performs more than40,000 switchings, if you follow our recommendations.

Maximum switching capacity / Nominal voltage:Light bulbs and halogen lamps max 2300 W1-light electronic control gear: 30 x18 W, 25 x 36 W or 20 x 58 W max2-light electronic control gear: 20 x (2 x 18 W), 15 x (2x 36 W) or 10 x (2 x 58 W) max

5. Between the motion detector and the connected lighting, aminimum distance of 1.5 m must not be gone below. Lights with-in the sensor area could otherwise trigger the pulse for renewedswitch-on after switch-off due to the change of heat. Emittersmust not be directed straight towards the motion detector. Extra-neous light can impair the functioning (e.g. twilight sensor).

6. The reach can be influenced by rotating and pivoting the sen-sor part or through partial cover of the lens with the blind. Ifmains parallel inductances, such as relays, air gap switches, flu-orescent lamps or transformers are switched, the application ofan RC quenching circuit (item no 33260) is recommended in par-allel with the consumer load. Parallel inductances can generateovervoltages on switch-off in the region of 3,000 – 4,000 V.

7. After installation the setting controllers must always pointdownwards, as otherwise the detection is directed upwards.Lateral detection can then no longer be carried out!

8. Motion detectors are not suited for use with burglary and hold-up alarm systems, as the prescribed sabotage safety and a mul-tiple pulse counter are missing.

9. Ceiling installation: For installation, for example, under project-ing roofs or under balconies, motion detectors Professional LINEand Alarmtech are suitable.

By simply rotating the sensor casing, the device can be preparedfor ceiling installation. After installation the setting screws mustagain point downwards.

Important: bear in mind a mounting height of max 6 m!

Swiss Garde models with high-performance relaysrecommended for electronic control gears:

Swiss Garde Presence AP Item no 25080Swiss Garde Presence Concealed Item no 25070Swiss Garde 360 Premium Item no 25050Swiss Garde 360 Premium Concealed Item no 25060Swiss Garde 360 Plus Item no 25000Swiss Garde 290 IR Item no 25250Swiss Garde 300 Presence Concealed Item no 25210Swiss Garde 180 IR Concealed Item no 25280

Despite the high switching capacity of the relays used, we recommend to connect a relay or air gap switch upstream of inductive loads, energy-saving lamps and fluorescent lights, and to activate these via the short duration pulse function. This way you will increase the life of the relay by many years!


Accessories

67

Disturbance Sources

66

Disturbance Sources, Causesand Trouble ShootingSeveral factors can impair the correct functioning of a motiondetector, such as changes of temperature and reflexions withinthe detection area or the connection of inductive loads. Beloware briefly listed the most common disturbances, their causesand applicable trouble shooting.

1. The reach is too small or the switch-on of the light is too late, respectively.

Main causes:– The sensor / detection area is directed downwards too

steeply.– Front and direct approach towards the detector– Rain, fog or damp air– Reach controller set to minimum

To remedy these disturbances, we recommend to check the de-tection area. Please bear in mind that a person’s head eradiatesthe most heat and should therefore be within the detection area.As the heat rises, the upper detection area should be situated atthe height of the forehead or above! In case of front approach the installation place should be cor-rected. Installation in the middle above the door facilitates directstepping up towards the detector. It is better to fasten the detec-tor at 2 m sideways of the door! In damp air, such as in showers,the reach is shortened. Do bear this in mind in your planning.All Swiss Garde 360 ceiling detectors and all Busch-Wächtersare provided with a reach controller. Set the reach to maximumwithin the interior area, provided there is no draught!

2. Variations of reach

The main causes are fluctuations of temperature or direct ap-proach. High outside temperatures and bad ‘conditions of visibil-ity’ due to fog,rain or snow can temporarily shorten the reach.Excessive reaches occur if very hot heat sources, such astrucks, trains or buses, pass by at high speed. With these hot airtwirls, reaches of up to 50 m can be generated! In such cases,incline the outdoor detector downwards to a sufficient extent.

The automatic stabilisation of the reach of the Busch-Wächterreacts against the abovementioned effects, but for physical rea-sons it cannot guarantee 100 % values under al circumstances!

3. The light switches on and off for no reason.

Causes:– light bulb within the detection area – draught, wind– mains variations, interferences– daytime operation within the outside area: not possible!

Constant movements within the detection area, such as vehicles,winds moving bushes and trees, ventilators, light switching on and off, can cause the motion detector to switch on and off or totrigger it, respectively. Cover up the entire motion detector with abox (e.g. packing of the motion detector) and check whether themotion detector switches off entirely. In this, make sure that thebox is placed correctly and is not held onto by hand! If the lightswitches off, you will be certain that there is an external distur-bance source and that the motion detector works correctly. If not,the cause might be in the connected load. Redirect the motiondetector again in case of external disturbance sources or coverthe respective lens parts with clips or blinds. Please note: duringdaytime operation the sunlight can trigger a switch-on! Turn thecontroller to nighttime operation.

Draught, wind: The gasket must be inserted for the 360° con-cealed models because of possible draught caused by ventila-tors.

Please note: For inductive loads or time switches, switch in par-allel only up to a maximum of 4 motion or presence detectors.

4. The light does not switch off.

Causes:– inductive loads, interference– reflective surfaces, etc.– constant movement within the detection area– daytime operation (not possible within the outside area:

sunlight!)

Inductive loads:

Fluorescent lights, energy-saving lamps, electronic control gears, transformers, etc., are inductive loads which generate in-verse voltage and cause the motion detector to start the deadtime again. Switch on an RC quenching circuit between switchedphase and neutral conductor for the protection of the motion detector.

Electronic control:

In some motion detectors, resistance/condensers protect theintegrated relay against interference voltage peaks of the con-nected load. Such protective circuit causes a small capacitystandby current of below 1m A to flow if the relay is open (lightswitched off). If the motion detector is not loaded, a residualvoltage can be measured at the switched phase. In case of sev-eral motion detectors connected in parallel, the currents will addup. In conventional loads no difficulties would arise from this, but in electronic loads, such as an electronic time relay withsmall control current, this can lead to permanent switch-on.

To minimise the residual voltage, an RC quenching circuit can be installed in parallel to the load on each motion detector, theresidual voltage, however, will basically not be eliminated com-pletely. Such residual voltage can also be minimised or eveneliminated by switching in parallel a resistance or small electricbulb (also applied as control lamp). For the reasons mentioned,we recommend for electronic relays and time switches, to onlyswitch in parallel a maximum of 4 motion detectors or to use amechanical relay.

Reflective surfaces:

Mirrors, glass cabinets, light marble and sometimes even water-drops on the lens can cause disturbances. IR radiations are reflect-ed and trigger circuits. Cover up the respective lens parts. Heatedfloors can reduce the reach!

5. The light does not switch on

Causes:– the lamp is not working– there is no mains voltage– twilight value is set too low (dark)– connected incorrectly

Check the illuminant, the power supply and the twilight controller.Rotate the twilight controller to a very bright 1000 lux. In the shortduration pulse motion detector or in short duration pulse settings,the light will flash up only shortly up to 55 secs after the pause time!


Safety Guard

Safety guard for Swiss Garde 360 Presence and Motion Detector, Pluswhite 150 Øx80mm 3331 15.00

Safety guard for Infra Garde 200, Infra Garde 140white 160x120x90mm 3011 15.00

Safety guard for Swiss Garde 360 wall installationstainless steel 120x95x50mm 3031 10.00

Safety guard for Infra Garde Maxumwhite 160x120x90mm 3071 10.00

Mounting Accessories

Pulse generator230V, 50 Hz 3390 10.00for time switch control 50 x 20 x 20 mm

Compact RC quenching circuit (condenser)For the protection against overvoltage and 3326 5.00malfunctions (cycles) in mains parallelinductances, such as relays, transformers or PL lights, etc.0,1 µF (100n +100R x 2)Dimensions: 23 x 13 x 7mmCan be connected to the motion detector

VaristorTo be installed for the protection against interference 3328 3.00voltage peaks (switch pulses of the mains),between phase and neutral conductor of the motion detector. Overvoltage of 10MV–K275Dimensions: 11 mm x 4 mm


Connection Diagrams Presence Detector

68

Connection Diagrams Motion Detectors

69

Infra Garde 200 Plus or 140 Plus withadditional activation via a break contact switch.

Infra Garde 200/140 Plus and Infra Garde 180Concealed with RC circuit to inhibit peak voltages.

RC circuit or relay circuit to inhibit peak voltages.

LN

LN L1

Maxum Inductive load

RC element(100μF/100Ω

Activation of staircase switch.Infra Garde Maxum

Activation via a break contact switchInfra Garde Maxum

Standard connection without control via external switches.

N L

LNPE

L

Parallel circuit with other lights or motion detectors.

LN L

LNPE

L N L

Connection with control via external push-buttons. (e.g. holiday mode, light ‘On’)

Parallel circuit of an additional light (without motion detector).

N L

LNPE

L N L

Aluminium Lantern 200 or Globe Lamp200 with additional break contact switch.

LN

L N

Swiss Garde 360 Presence as a fully auto-matic machine with additional activation viaa make contact switch.

Swiss Garde 360 Presence as a semiauto-matic machine with an external switch. Thelight can be switched on and off manuallythrough switches.

5A

LN

L L1S N

HLK

Swiss Garde Presence Mini with 2 relays and additional activation via a make contactswitch.

Swiss Garde 360 Presence Parallel Connection as a fully automaticmachine with additional activation via a make contact switch.

5A

LN

L L1S N

HLK

5A L L1S N

HLK

Swiss Garde 360 Presence Parallel Connection as a semiautomaticmachine with additional external switches.

LN

L NR L L NR L

Swiss Garde 360 Plus with additionalactivation via a make contact switch.

LN

L NR L

Swiss Garde 360 Premium Concea-led with additional activation via amake contact switch.

LN

L NR L

Swiss Garde 360 Plus or Premium Parallel Con-nection Concealed with additional activation viaexternal pushbuttons. (Recommendation: switchin parallel only up to max 4 motion detectors)

Connection with activation via an external switch. (Light fully On)

Stainless Steel LightsBall-Tec 200, Ruby-Tec 200, Post-Tec 200 Ball and Post-Tec 200 Ruby

Swiss Garde Infra Garde

LN

L N L

LN

LampLN L1Normally closed contact pushbutton

LN

L N LRelay

RC

LN

LampLN L1

Maxum

LN L

Staircase automatic

Normallyopencontactpushbutton

-

N L

LNPE

L

N L

LNPE

L

5A

LN

L L1S N

HLK

Potential-free Potential-free

5A

LN

L L1S N

5A

LN

L L1S N

HLK

5A L L1S N

HLK


Sender FA C S I M I L E

Order Number:

Our Ref.:

Item Number : Quantity: Text:

Remark:

E-mail address:

Date:

Order

Please send me your newsletters to the below e-mail address:______________________________

Please send me:___________________________________

M. Züblin AGNeue Winterthurerstr. 308304 WallisellenFax +41 44 8782233

70 71

Advertising Material

Order your advertising material pack from

M. Züblin AG under tel: +41 44 878 22 22

A4 Brochure Holder- A4 brochure action kit

Swiss Garde MZ 5000

- A4 brochure Swiss Garde MZ 5000

- Züblin Catalogue 2008

- A6 brochure Z-radio remote control

- Motion detector manual

A4 Brochure Racks- A4 brochure action kit

Swiss Garde MZ 5000


A3 Brochure Racks- A3 brochure action kit


A3 Demo Boards- Swiss Garde MZ 5000

Installation and 25W electric bulb

2m Rollup Demo Wall- Illustration of Swiss Garde MZ 5000

Brochure Racks

Brochure HoldersDemo Boards


Notes

72

General Terms of Delivery and Payment of Züblin Elektro GmbH

1. ScopeThe following terms apply exclusively for all deliveries and services (hereafter called only ‘services’), including future ones, unless otherwise agreed inwriting. The terms and conditions of our customers only apply as far we have agreed to these in writing.

2. Conclusion of Agreement Our offers are without engagement. Agreements only materialise following our written confirmation of order or delivery. Members of our staff, in particular,are bound to confirm in writing any verbal additional agreements or promises which would go beyond the content of the written agreement or would alterthe present General Terms of Delivery and Payment to our disadvantage.

The illustrations, drawings or details of colours, weight and measurement relating to our offer are only approximate values, unless explicitly specified asbinding. DIN tolerances apply in case of complaints about DIN standardised products.

3. Prices Our prices apply on an ex works basis excluding packing and turnover tax as valid each time.

4. PaymentPayments are to be made within 30 days from date of invoice strictly net into our designated account. Payments are deemed effected only to the extentto which we can freely access the monies at our bank. Cheques and drafts are accepted for payment only; bank service charges are for the customer’saccount. These are payable immediately.

In case of late payment, we will charge interest to the amount of 8 points above the base rate, but mininum 10 %.

Retention of payments or offset against counterclaims is only admissible to the extent to which the counterclaims are undisputed or legally ascertained.

5. Passing of risk and short deliveriesThe risk is passed over to the customer as soon as we have handed over the product to the carrier or, should the dispatch be delayed through no fault ofour own, notified he customer of the readiness for dispatch, even in case we have accepted the costs of further services, such as forwarding charges.

6. Delivery periodThe delivery period commences with the dispatch of the confirmation of order, but not before clarification of all details relating to the execution of orderand technical issues and also receipt of an agreed down payment. The delivery period is deemed met if the product has left the factory by the expiringdate or readiness for dispatch has been advised, should the dispatch be delayed through no fault of our own. Shipments are charged the cost of postageand packing costs to the amount of Euro 6.00. For express deliveries the standard postal rates apply.

As regards late delivery, in case of simple negligence our liability is limited to a flat-rate compensaton to the amount of 0.5 % per complete week, but tono more than 5 % of the late delivered order value. A claim for damages in lieu of delivery in accordance with item 9 remains unaffected by this. Our delivery is subject to timely and correct supply to ourselves by our subcontractors.

7. Retention of titleWe retain title to the delivered product until receipt of all payments due and the irrevocable credit entry of all accepted cheques and drafts arising from thebusiness connection with the customer. Should a current account with business partners be in place, retention of title refers to the recognised balance.

The customer has the right to resell the product that is subject to retention of title, in an ordinary course of business; he will, however, assign to us in advance with immediate effect all claims to their full amount, which might arise from the resale or subsequent use on behalf of a customer, against the sameor third parties. The customer has the right to collect the claims assigned to us, as long as he meets his payment obligations from the proceeds collected.

If the customer no longer meets his payment obligations, we have the right to require the customer to advise us of the claims assigned and their debtors, toprovide us with all necessary details to enable us to make collection, to hand over all respective documents and to advise his debtors of such assignment.Redemption of product that is subject to retention of title, does not mean withdrawal from the Agreement. In case we declare withdrawal, we will be entitledto our discretionary utilisation of said product.

If the value of the securities exceeds our claims by more than 10 %, we will insofar release our securities at our own option on the customer’s request.

8. Liability for defectsAny defects are to be advised to us in writing without delay, but not later than 8 days following receipt of the product, and latent defects not later than 3 days following their detection. If such time limits are exceeded, all claims and rights arising under our liability for defects will lapse. The limitation period is 12 months from delivery, unless we have breached our obligations intentionally or in a grossly negligent manner or have maliciously concealedthe defect.

In case of justified complaints we will deliver a substitute or rectify the product at our own option. The costs of supplementary performance arising fromthe fact that the purchased product was transferred upon delivery to a place other than the commercial premises of the customer, will not be borne.

The violation of the rights of third parties is only deemed a defect if such industrial property rights exist within the European Economic Area (EEA).

9. General liabilityAny claims of whatever nature for damages against us are excluded if we, our legal representatives or auxiliary persons have caused the damage throughsimple negligence. Such exemption from liability does not apply in case of bodily harm or in taking over a contractual guarantee or in case of violation ofessential contractual obligations which would jeopardise performance of the purpose of the agreement. In this, our liability is, however, limited to thescope of the guarantee or, in case of gross violation of essential contractual obligations, to contractually anticipated damages, respectively. Any claimsunder the Product Liability Act will remain unaffected.

With the exeption of claims arising from liability for defects, under the Product Liability Act and for injury to life or limb or damage to health, claims fordamages will lapse one year after the customer has become aware of the damage and his liability to pay damages or should have become aware of thesame without gross negligence.

10. Place of performance, court of jurisdiction, applicable lawPlace of performance for all services arising under the delivery contracts is our registered office. For all disputes arising from the delivery contract, courtof jurisdiction is the one in charge of our registered office. We have the right, however, to also take legal action at the court of jurisdiction covering theregistered office of the customer.

German law is applicable. The United Nations Convention on Contracts for the International Sale of Goods dated 11.04.1980 is excluded.

Für Sicherheit,Komfort und Stromersparnis !For security,comfort and power saving !

M.Züblin AGNeue Winterthurerstrasse 308304 WallisellenTelephone +41 44 878 22 22Fax +41 44 878 22 33www.zublin.de

Zublin

Documents

Transcript of Zublin