Virtual Learning Environment (VLE) Virtual Learning Environment (VLE) YES VLE URL YES VLE URL .
Zoom User Manual frog vle
-
Upload
victor-tan -
Category
Documents
-
view
245 -
download
0
Transcript of Zoom User Manual frog vle
-
7/27/2019 Zoom User Manual frog vle
1/54
Zoom
WIMAX & WIFI Gateway
-
7/27/2019 Zoom User Manual frog vle
2/54
Zoom User Manual V1.0
1
Contents....................................................................................... 1
About this Manual.............................................................................. 4
Purpose ...................................................................................... 4
Prerequisite Skills and Knowledge ............................................................ 4
Conventions Used in this Document ............................................................ 5
Chapter 1 Introduction....................................................................... 6
Product Overview ............................................................................. 6
Product Package .............................................................................. 7
Connectors ................................................................................... 8
LED Indicators .............................................................................. 10
Chapter 2 Installation...................................................................... 11
Chapter 3 Web Interface..................................................................... 15
Chapter 4 Reference manual.................................................................. 18
Contents
-
7/27/2019 Zoom User Manual frog vle
3/54
Zoom User Manual V1.0
2
User Interface Introduction ................................................................. 19
Basic Setup ................................................................................. 20
Step1 : Yes ID ............................................................................ 20
Step2 : Device SSID ....................................................................... 21
Confirmation (Step3) ...................................................................... 23
Complete (Step4) .......................................................................... 24
Status ...................................................................................... 25
Status | WiMAX Status ..................................................................... 25
Status | Device Status .................................................................... 26
Status | Lease Status ..................................................................... 27
WiFi ........................................................................................ 28
VoIP ........................................................................................ 33
Network ..................................................................................... 34
Network | Basic ........................................................................... 35
-
7/27/2019 Zoom User Manual frog vle
4/54
Zoom User Manual V1.0
3
Network | Internet Protocol ............................................................... 37
Network | DHCP Server ..................................................................... 38
Network | Lease Reservation ............................................................... 40
Network | Port Forwarding ................................................................. 41
Management .................................................................................. 42
Management | Password ..................................................................... 42
Management | Device Time .................................................................. 44
Management | Device Name .................................................................. 45
Management | Device Name .................................................................. 46
Control Panel ............................................................................... 47
Control Panel | Software .................................................................. 47
Control Panel | Dynamic DNS ............................................................... 49
Control Panel | About ..................................................................... 53
-
7/27/2019 Zoom User Manual frog vle
5/54
Zoom User Manual V1.0
4
Purpose
This document provides information and procedures on installation and configuration of Zoom WiMax and WiFi Gateway. You
could utilize the theoretical information in this guide to setup your device.
Prerequisite Skills and Knowledge
To use this document effectively, you should have a working knowledge of Local Area Networking (LAN) concepts and wireless
Internet access infrastructures. In addition, you should be familiar with the following:
Hardware installers should have a working knowledge of basic electronics and mechanical assembly, and should understand
related local building codes.
Network administrators should have a solid understanding of software installation procedures for network operating systems
under Microsoft Windows 95, 98, Millennium, 2000, NT, and Windows XP,Windows 7 and general networking operations and
troubleshooting knowledge.
About this Manual
-
7/27/2019 Zoom User Manual frog vle
6/54
Zoom User Manual V1.0
5
Conventions Used in this Document
The following typographic conventions and symbols are used throughout this document:
Very important information. Failure to observe this may result in damage.
Important information that should be observed.
Additional information that may be helpful but which is not required.
bold Menu commands, buttons and input fields are displayed in bold
codeFile names, directory names, form names, and system-generated output
such as error messages are displayed in constant-width type
Placeholder for certain values, e.g. user inputs
[value] Input field format, limitations, and/or restrictions.
-
7/27/2019 Zoom User Manual frog vle
7/54
Zoom User Manual V1.0
6
Product Overview
Thank you for choosing Zoom WIMAX and WIFI Gateway.
Zoom WIMAX and WIFI Gateway is an all-in-one device that
integrates WiMAX, Wi-Fi and VoIP service. Compliant with IEEE
802.16e WiMAX standard and Wi-Fi 802.11b/g/n, Zoom provides
extended coverage and high performance wireless connectivity with
minimized capital expenses.
Product Overview
Chapter 1 Introduction
-
7/27/2019 Zoom User Manual frog vle
8/54
Zoom User Manual V1.0
7
Product Package
Item Qty
1 Zoom WIMAX and WIFI Gateway. 1
2 User Manual 1
3 Power Adapter 1
4 RJ-45 Ethernet cable 1
If any of the items mentioned above are missing or damaged, please contact our customer support immediately.
-
7/27/2019 Zoom User Manual frog vle
9/54
Zoom User Manual V1.0
8
Connectors
1. WPSButton: Press WPS button to establish wireless connection
without setup the device.
Step1: Press the WPS button on Zoom, and the WPS LED
indicator will start flashing.
Step2: And then press the WPS button on the client you wish to
connect within 2 minutes.
2. RESET Button (Reboot/ Reset): Press and hold the Reset button
for less than 5 seconds to reboot the device. Or press and hold the
Reset button for more than 5 seconds to reset IP address, device
name and login password settings of device to factory default.
3. Telephone Port (RJ-11): Connect your telephone to the device
using an RJ-11 telephone cable.
-
7/27/2019 Zoom User Manual frog vle
10/54
Zoom User Manual V1.0
9
4. LAN Port (RJ-45): This port is for connecting the device to your PC
or other network equipment (such as hubs or switches) with an RJ-45
Ethernet cable.
5. DC-12V Port (Power Adapter Socket): Connect the power adapter
provided with the device.
-
7/27/2019 Zoom User Manual frog vle
11/54
Zoom User Manual V1.0
10
LED Indicators
LED Description
Off AC Input not active or Power FailPower
On Power On
Off LAN Device Disconnect
On LAN Device ConnectEthernet
Flashing Data Packet Transmit
Off VoIP disable (Not registered or RJ11 not connected)
On Device registered and on hookVoIP
Flashing Device registered and off hookOff Wi-Fi disable
On Wi-Fi enableWi-Fi
Flashing Data Packet Transmit
Off WPS Off
WPS lights up when button is pressed;Wi-Fi WPSOn
WPB lights off when release WPS button
Flashing Scanning until Network entry successfullyWiMAX Signal
Strength On Displays Signal Strength
-
7/27/2019 Zoom User Manual frog vle
12/54
Zoom User Manual V1.0
11
Please follow the steps below to install the device:
Step 1: Place the device on a flat work surface.
Step 2: Connect the device Ethernet port to your PC with an RJ-45
Ethernet cable that is supplied.
Step 3: Connect a standard telephone to the device VoIP port using a
standard phone cable.
Step 4: Insert the power cord into the device's DC-12V power jack.
Step 5: Insert the power cord into power outlet.
Step 6: The device will start the boot process. Please wait for a few
seconds to let the boot process complete.
Chapter 2 Installation
Installation
-
7/27/2019 Zoom User Manual frog vle
13/54
Zoom User Manual V1.0
12
Step 7: Select Local Area Connection Status from the Windows task
bar and click Properties.
Local Area Connection Status
-
7/27/2019 Zoom User Manual frog vle
14/54
Zoom User Manual V1.0
13
Step 8: Double click on the Internet Protocol (TCP/IP).
Local Area Connection Properties
-
7/27/2019 Zoom User Manual frog vle
15/54
Zoom User Manual V1.0
14
Step 9: Select Obtain an IP address automatically and click OK.
Step 10: At this point, the device should have been connected to the
WiMAX Base station successfully. This can be verified by
observing the signal strength LEDs (Please refer to Visual
Indications section in Chapter 1 of this manual to find the
location of these LEDs on the device). At least one of these
LEDs should be glowing continuously to confirm the successful
connection to the Base Station. Now you can start browsing the
Internet.
Internet Protocol (TCP/IP) Properties
-
7/27/2019 Zoom User Manual frog vle
16/54
Zoom User Manual V1.0
15
Please follow the steps below to configure your device
through the web interface:
Step 1: Open the Web browser and enter the default IP
address of the device, which is: http://192.168.1.1/
Web Browser
Chapter 3 Web Interface
-
7/27/2019 Zoom User Manual frog vle
17/54
Zoom User Manual V1.0
16
Step 2: Enter the administrator login password to access
web management interface. The default Password
is admin.
Welcome Page
-
7/27/2019 Zoom User Manual frog vle
18/54
Zoom User Manual V1.0
17
Step 3: The page shown here will be displayed on your
browser after login. You can now configure the
device settings.
User Interface
-
7/27/2019 Zoom User Manual frog vle
19/54
Zoom User Manual V1.0
18
The main menu is located on the left side of the screen and each main menu item contains sub-items on the top right of the screen.
You can refer to the menu structure below:
Menu Items Sub Items Menu Items Sub Items Menu Items Sub Items
Basic Setup - VoIP - Control Panel Software
Dynamic DNS
About
Status WiMAX StatusDevice Status
Lease Staus
Network BasicInternet Protocol
DHCP Server
Lease Reservation
Port Forwarding
RebootLogout
Reconnect
-
WiFi - Management Password
Device Time
Device Name
Restore To Factory
Chapter 4 Reference manual
Please click Apply button every time the settings are changed to save the changes.
-
7/27/2019 Zoom User Manual frog vle
20/54
Zoom User Manual V1.0
19
User Interface Introduction
Reboot/Logout/Reconnect
There are 3 buttons in the lower left corner. Clicking Reboot
will restart your device. Click the Logout button to logout from
the web interface. When the Reconnect button is clicked the
device will attempt reconnection to the Base Station.
Wi-Fi Indicator
VoIP Indicator
WiMAX Signal Indicator
UI Introduction
-
7/27/2019 Zoom User Manual frog vle
21/54
Zoom User Manual V1.0
20
Basic Setup
Basic Setup is just like a simple setup wizard that could
help you setup your device by following the steps.
Step1 : Yes ID
Please enter theYes ID and Password on theYes Card
provided in the product package for the first time. And
re-enter the password on the Password Confirmation field.
Cancel Button: Click the Cancel button to clear all
input fields on this window.
Next>> Button: Click Next button to continue the setup
process.
Basic Setup > Step1 : Yes ID
-
7/27/2019 Zoom User Manual frog vle
22/54
Zoom User Manual V1.0
21
Step2 : Device SSID
Network Name (SSID): Define the service set
identifier that represents the name of your
network. (Default value will be Yes Zoom - last 6
digits of your device MAC Address)
SSID Broadcast: Broadcast your SSID into open
air by checking this checkbox that is checked in
default. Otherwise uncheck the checkbox to make
your device invisible unless a wireless client
already knows the SSID.Basic Setup > Step2 : Device SSID
-
7/27/2019 Zoom User Manual frog vle
23/54
Zoom User Manual V1.0
22
Security: Check this checkbox to enable Wi-Fi
Protected Access (WPA) wireless security.
Key Pass Phrase: This field will appear if you
enable the option above. Enter the key you would
like to use for your wireless security in 8~63
characters or 64 hex digits.
Button: Click Next button to continue the setup
process.
Basic Setup > Step2 : Device SSID > WPA Key
Be aware that other computer in the same range of your wireless network would be able to see your network if you
enable SSID Broadcast, so we strongly recommend you to enable the security option at the same time to ensure
others could not access your network.
-
7/27/2019 Zoom User Manual frog vle
24/54
Zoom User Manual V1.0
23
Confirmation (Step3)
You can double confirm the input data in the previous setup
process here.
-
7/27/2019 Zoom User Manual frog vle
25/54
Zoom User Manual V1.0
24
Complete (Step4)
The setup wizard is complete! You can view the status by
clicking on the Status page link (in blue) to redirect to the
Status page.
Basic Setup > Complete
-
7/27/2019 Zoom User Manual frog vle
26/54
Zoom User Manual V1.0
25
Status
Status | WiMAX Status
Select Status > WiMAX Status to display the WiMAX
connection status.
Refresh Button: Click the Refresh button to refresh the
current WiMAX connection status.
Auto Button: Click the Auto button to update the status
information periodically.
Status > WiMAX Status
-
7/27/2019 Zoom User Manual frog vle
27/54
Zoom User Manual V1.0
26
Status | Device Status
Select Status > Device Status to display the status of device
system uptime and WAN information.
Refresh Button: Click the Refresh button to update the
current device status.
Auto Button: Click the Auto button to update the status
information periodically.
Status > Device Status
-
7/27/2019 Zoom User Manual frog vle
28/54
Zoom User Manual V1.0
27
Status | Lease Status
Select Status > Lease Status to view the current status of
client host PC such as host name, host PCs MAC address,
IP address, and remaining lease time.
Refresh Button: Click the Refresh button to display the
updated information of the client host PC.
Auto Button: Click the Auto button to refresh the
information automatically.
Status > Lease Status
-
7/27/2019 Zoom User Manual frog vle
29/54
Zoom User Manual V1.0
28
WiFi
Select WiFi to enable/disable and configure the Wi-Fi
interface.
Wireless Settings:
Interface status: Enable or disable the Wi-Fi
interface by clicking this button.
Network Name (SSID): Define the service set
identifier that represents the name of your network.
(Default value will be Yes Zoom - last 6 digits of
your device MAC Address)
Radio Channel: Select the appropriate channel for
your Wi-Fi network.WiFi
-
7/27/2019 Zoom User Manual frog vle
30/54
Zoom User Manual V1.0
29
Working Mode: Select the wireless operation mode
for your Wi-Fi network. (The selection contains
802.11b/g/n, 802.11b/g, 802.11g/n, 802.11b only,
802.11g only and 802.11n only)
Bandwidth: Select the channel bandwidth for
802.11n only.
Transmit Power: Select the Wi-Fi transmit power
from the drop down menu.
RTS Threshold: Specify the packet size threshold of
the device by changing the request-to-send (RTS)
value. (Range : 256 to 2432)
CTS Protection Mode: Set Clear to send (CTS)
protection mode to Auto to ensures computers on a
network can connect to a wireless router when many
communications devices are present.
-
7/27/2019 Zoom User Manual frog vle
31/54
Zoom User Manual V1.0
30
Preamble Length: Define the length of preamble,
either short or long.
SSID Broadcast: Broadcast your SSID into open air
by checking this checkbox, which is checked in
default. Otherwise uncheck the checkbox to make
your device invisible unless a wireless client already
knows the SSID.
Security:
Authentication: Select the Wi-Fi security method.
Encryption: Select the Wi-Fi encryption algorithm.
WiFi >Security
-
7/27/2019 Zoom User Manual frog vle
32/54
Zoom User Manual V1.0
31
ACL Setting:
System Default: Select the filter action for the
device access control.
Disable: Select disable to disable access control
(ACL) feature.
Allow: To create a MAC filter list that allows the
specific clients to have access to the wireless
network.
Insert Button: Click Insert to add MAC address (up
to 10) to the list.
Del Button: Click Del to remove MAC address from
the list.
WiFi > Access Control List
WiFi > Access Control List > Allow
-
7/27/2019 Zoom User Manual frog vle
33/54
Zoom User Manual V1.0
32
Deny: To create a MAC filter list that will block the
specific clients to have access to the wireless
network.
Insert Button: Click Insert to add MAC address (up
to 10) to the list.
Del Button: Click Del to remove MAC address from
the list.
Cancel Button: Click the Cancel buttonto clear the
changes that you have made on this window.
Apply Button:The changes that you have made on this
window can be saved in the device by clicking the Apply
button.
WiFi > Access Control List > Deny
-
7/27/2019 Zoom User Manual frog vle
34/54
Zoom User Manual V1.0
33
VoIP
Select VoIPto enable or disable the VoIP feature.
Enable Line1: Check on this checkbox to enable
VoIP feature or uncheck it to disabled.
Cancel Button: Click the Cancel buttonto clear the
changes that you have made on this window.
ApplyButton: The changes that you have made on
this window can be saved in the device by clicking
the Apply button.
VoIP
-
7/27/2019 Zoom User Manual frog vle
35/54
Zoom User Manual V1.0
34
Network
Web Login from Internet
This function enables the Zoom to be accessed from external networks, typically from the internet. To enable this function, follow the
procedures below:
Step 1: Go to Network. Then click Basic.
Step 2: Ensure that Enable Web Login from Internet is checked.
Step 3: Specify the Web Login Port from Internet to use. Default is 8080.
Step 4: When done, click Apply to save the settings.
Enabling Web Login from Internet may expose Zoom to unauthorized access.
-
7/27/2019 Zoom User Manual frog vle
36/54
Zoom User Manual V1.0
35
Network | Basic
Select Network > Basicto configure the basic network
settings.
Operation Mode: Displays the operation mode of the
firewall.
Enable Firewall: Click the checkbox to enable device
firewall.
Enable Web Login from Internet: Enabling thisoption
will allow you to access the device from other networks
by https.
Web Login Port from Internet: Define a specific port
number for security access control (Matches numbers in
range of 1 through 65536).
Network > Basic
-
7/27/2019 Zoom User Manual frog vle
37/54
Zoom User Manual V1.0
36
Enable ping from internet: The device will respond to a
ping request from the internet if this option is enabled.
Enable UPnP IGD: When this option is enabled, certain
Windows applications would setup the port forwarding
rule dynamically.
DMZ IP Address: The IP address of DMZ should be
entered here.
Cancel Button: Click the Cancel buttonto clear the
changes that you have made on this window.
ApplyButton: The changes that you have made on
this window can be saved in the device by clicking
the Apply button.
The firewall feature can be used to block unauthorized access while allowing only the authorized communications
from the Internet. This feature also allows the device to be managed over the Internet by authorized personnel.
-
7/27/2019 Zoom User Manual frog vle
38/54
Zoom User Manual V1.0
37
Network | Internet Protocol
Select Network > Internet Protocolto configure the internet
protocol.
Connection Mode: Displays the current connection
mode of the device to the WiMAX network.
Host Name: Enter the host name provided by your
service provider (optional).
Cancel Button: Click the Cancel buttonto clear the
changes that you have made on this window.
ApplyButton: The changes that you have made on this
window can be saved in the device by clicking the Apply
button.Network > Internet Protocol
-
7/27/2019 Zoom User Manual frog vle
39/54
Zoom User Manual V1.0
38
Network | DHCP Server
Select Network > DHCP Server to configure the internal
DHCP server settings. This device has a built-in DHCP server
that can be used for managing the allotment of IP address for
the devices connected to the LAN Port of the device.
Enable DHCP Server: Enable DHCP Server by clicking
on the checkbox.
DHCP Server IP address: Enter the IP address for
device's DHCP server.
DHCP Starting IP address/ DHCP Ending IP address:
Define the IP address range that will be supported by the
DHCP server.
DHCP Lease Time: Specify the IP address renewal
time.
Network > DHCP Server
-
7/27/2019 Zoom User Manual frog vle
40/54
Zoom User Manual V1.0
39
Cancel Button: Click the Cancel buttonto clear the
changes that you have made on this window.
ApplyButton: The changes that you have made on this
window can be saved in the device by clicking the Apply
button.
-
7/27/2019 Zoom User Manual frog vle
41/54
Zoom User Manual V1.0
40
Network | Lease Reservation
Select Network > Lease Reservation to assign the specific
IP addresses to the specific client device connected to the
LAN port.
Add Button: Click the Add button to enter the lease
reservation information.
Del Button: Click the Del button to delete the selected
lease reservation information. Before clicking Del, one or
more of information items must be selected by enabling
the checkbox on the Select column of the table.
Cancel Button: Click the Cancel buttonto clear the
changes that you have made on this window.
ApplyButton: The changes that you have made on this
window can be saved in the device by clicking the Apply
button.
Network > Lease Reservation
-
7/27/2019 Zoom User Manual frog vle
42/54
Zoom User Manual V1.0
41
Network | Port Forwarding
Select Network > Forwardingto manage the additional port
forwarding rules.
Add Button: Click the Add button to insert new port
forwarding rule. When adding a new port forwarding rule,
please select TCP or UDP, and then enter port and IP
information such as WAN port range, LAN IP address,
and LAN port range.
Del Button: Click the Del button to delete the selected
port forwarding rule.
Cancel Button: Click the Cancel buttonto clear the
changes that you have made on this window.
ApplyButton: The changes that you have made on this
window can be saved in the device by clicking the Apply
button.
Network > Port Forwarding
-
7/27/2019 Zoom User Manual frog vle
43/54
Zoom User Manual V1.0
42
Management
Management | Password
Select Management > Password to change the login
credential.
New Login Password: Enter a new password.
Confirm New Login Password: Re-enter the new
password to confirm.
Cancel Button: Click the Cancel buttonto clear the
changes that you have made on this window.
ApplyButton: The changes that you have made on
this window can be saved in the device by clicking
the Apply button.
Management > Password
-
7/27/2019 Zoom User Manual frog vle
44/54
Zoom User Manual V1.0
43
Forgot your password?
Press and hold the Reset button for more than 5 seconds to reset IP address, device name and login
password to factory default. (Please see Connector section in CHAPTER 1 of this document to find the location
of Reset button on the device)
Factory default password?
The factory default password is admin.
We strongly recommend you to change the login credential for device security.
-
7/27/2019 Zoom User Manual frog vle
45/54
Zoom User Manual V1.0
44
Management | Device Time
Select Management > Device Timeto set the time zone.
Current Local Time: Displays current local time.
Time Zone: Select the proper time zone for your location
from the drop-down menu.
Auto Adjust for Daylight Saving Time: You may enable
this option if your location observes Daylight Savings
Time.
Cancel Button: Click the Cancel buttonto clear the
changes that you have made on this window.
ApplyButton: The changes that you have made on
this window can be saved in the device by clicking
the Apply button.Management > Device Time
-
7/27/2019 Zoom User Manual frog vle
46/54
Zoom User Manual V1.0
45
Management | Device Name
Select Management > Device Name to define a specific
name for your device, so that you can login to this device from
any PC on your internal network by entering the device name
on the address bar. The default name is Yes Zoom - last 6
digits of your device MAC Address.
Device Name: Displays the current device name.
New Device Name: Enter a new device name for
your device.
Cancel Button: Click the Cancel buttonto clear the
changes that you have made on this window.
ApplyButton: The changes that you have made on
this window can be saved in the device by clicking
the Apply button.
Management > Device Name
-
7/27/2019 Zoom User Manual frog vle
47/54
Zoom User Manual V1.0
46
Management | Device Name
Select Management > Restore To Factoryto clear all users
configuration and restore to factory default settings.
Apply: Click the Apply button to reset the device settings
to factory default.
Management > Restore To Factory
-
7/27/2019 Zoom User Manual frog vle
48/54
Zoom User Manual V1.0
47
Control Panel
Control Panel | Software
Select Control Panel > Software to manage the software of
your device.
Software Upgrade
Install IPKG: Click Browse button to select the IPKG file
and then click Upgrade button to install the selected
IPKG. Or click the Remove button to delete the IPKG file.
Configuration Backup
Configuration: Enter the full file path or locate the
backup file which you want to restore by clicking on
Browse button and click Restore button to restore Control Panel > Software
-
7/27/2019 Zoom User Manual frog vle
49/54
Zoom User Manual V1.0
48
the selected backup file.
Otherwise, click on Browse button to select where
you want to save your backup file and click on Save
button to save the backup file.
-
7/27/2019 Zoom User Manual frog vle
50/54
Zoom User Manual V1.0
49
Control Panel | Dynamic DNS
Dynamic Domain Name Service (DDNS)
Dynamic Domain Name Service (DDNS) is a service that allows an internet device such as the Zoom to be remotely reachable by
the user although it does not have a fixed IP address. It allows the user to create a friendly URL address (example:
zoom.ddnsservice.com) for easy access to the Zoom remotely. Below is a list of DDNS service providers supported on the Zoom:
www.dyndns.org
www.dyns.cx
www.zoneedit.com
-
7/27/2019 Zoom User Manual frog vle
51/54
Zoom User Manual V1.0
50
To use the DDNS service, you will need to register an account with one of above DDNS service providers. Then follow the
procedures below to set up the DDNS on Zoom:
Step 1: Go to Control Panel. Then click Dynamic DNS.Step 2: Ensure that Enable DDNS is checked.
Step 3: Select the DDNS Service Providerand then fill up the DDNS User Name, Password and Host Name.
Step 4: When done, click Apply to save the settings
-
7/27/2019 Zoom User Manual frog vle
52/54
Zoom User Manual V1.0
51
How to use Web Login With DDNS?
To remotely accessed Zoom, please ensure you have followed procedures specified in Dynamic Domain Name Service (DDNS)
and Web Login from Internet.
Step 1: On the browser, type in the user selected URL together with https and port number into the address bar (example:
https://zoom.ddnsservice.com:8080).
Step 2: You will need to click allow on the warning message displayed on the browser to accept the device certificate.
Step 3: Browser will load the login page.
Step 4: Log into Zoom as per normal.
-
7/27/2019 Zoom User Manual frog vle
53/54
Zoom User Manual V1.0
52
Select Control Panel > Dynamic DNSto configure the DDNS
settings.
Enable DDNS: Check the checkbox to enable the
Dynamic Domain Name Service in order to keep the
domain name associated.
DDNS Service Provider: Select the address of DDNS
service provider from the drop-down menu.
Cancel Button: Click the Cancel buttonto clear the
changes that you have made on this window.
ApplyButton: The changes that you have made on
this window can be saved in the device by clicking
the Apply button.Control Panel > Dynamic DNS
-
7/27/2019 Zoom User Manual frog vle
54/54
Zoom User Manual V1.0
53
Control Panel | About
Select Control Panel > About to display the basic
information about the device: Service Provider,
Product Name, WAN port MAC address, LAN Port
MAC address, Model ID, Device hardware version
and Serial ID.
Control Panel > About