Zoeller Pump Company - Amazon S3...Reserve Powered Design:€For unusual conditions, a reserve...
2
Model 49 Features The Water Ridd'r III model submersible pump is designed for use in residential or light commercial dewatering applications and can be used to transfer groundwater or effluent. The pump includes a cast iron motor housing with a corrosion-resistant, baked-on enamel finish and is designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance! This attention to detail is an inherent feature of every pump, making it one of the most reliable in the industry. Includes a tethered, float-operated mechanical switch. Includes a plastic carrying handle for easy transport. Hermetically sealed to be watertight, dust-tight, and completely submersible. Reserve Powered Design: For unusual conditions, a reserve safety factor is engineered into the design of every pump. Specifications Motor Characteristics Horse Power 1/4 HP Voltage 115 V Phase 1 Ph Hertz 60 Hz RPM 3450 RPM Type Permanent split capacitor Insulation Class B Amps 3.8 Amps Pump Characteristics Operation Automatic Auto On/ Off Points 11-1/4" / 4-1/8" (28.6 cm / 10.5 cm) Discharge Size 1-1/2" NPT Solids Handling 3/8" (9.5 mm) spherical solids Cord Length 9' (3 m) standard Cord Type UL listed, 3-wire cord and plug Max Head 18' (5.5 m) Max Flow Rate 32 GPM (121 LPM) Max Operating Temp 104° F (40° C) Cooling Oil filled Motor Protection Auto reset thermal overload Materials Characteristics Cap Glass-filled polypropylene Motor Housing Cast iron Pump Housing Glass-filled polypropylene Base Glass-filled polypropylene Upper Bearing Ball bearing Lower Bearing Ball bearing Mechanical Seals Carbon and ceramic Impeller Type Non-clogging vortex Impeller Engineered plastic Hardware Stainless steel Gasket NBR FM2419_Ea
Transcript of Zoeller Pump Company - Amazon S3...Reserve Powered Design:€For unusual conditions, a reserve...
Model 49
FeaturesThe Water Ridd'r III model submersible pump is designed for use in residentialor light commercial dewatering applications and can be used to transfergroundwater or effluent. The pump includes a cast iron motor housing with acorrosion-resistant, baked-on enamel finish and is designed to provide greatheat dissipation from the motor, ensuring a long service life. As with everyZoeller pump, each one is 100% pressure-tested, submerged and run to ensurequality and reliability for years of trouble-free performance! This attention todetail is an inherent feature of every pump, making it one of the most reliable inthe industry.
Includes a tethered, float-operated mechanical switch.Includes a plastic carrying handle for easy transport.Hermetically sealed to be watertight, dust-tight, and completely submersible.
Reserve Powered Design: For unusual conditions, a reserve safety factor isengineered into the design of every pump.
SpecificationsMotor CharacteristicsHorse Power 1/4 HPVoltage 115 VPhase 1 PhHertz 60 HzRPM 3450 RPMType Permanent split capacitorInsulation Class BAmps 3.8 Amps
Pump CharacteristicsOperation AutomaticAuto On/ Off Points 11-1/4" / 4-1/8" (28.6 cm / 10.5 cm)Discharge Size 1-1/2" NPTSolids Handling 3/8" (9.5 mm) spherical solidsCord Length 9' (3 m) standardCord Type UL listed, 3-wire cord and plugMax Head 18' (5.5 m)Max Flow Rate 32 GPM (121 LPM)Max Operating Temp 104° F (40° C)Cooling Oil filledMotor Protection Auto reset thermal overload
Materials CharacteristicsCap Glass-filled polypropyleneMotor Housing Cast ironPump Housing Glass-filled polypropyleneBase Glass-filled polypropyleneUpper Bearing Ball bearingLower Bearing Ball bearingMechanical Seals Carbon and ceramicImpeller Type Non-clogging vortexImpeller Engineered plasticHardware Stainless steelGasket NBR
FM2419_Ea
ModelModel Number Seal Mode Volts Phase Amps HP Lbs Kg
WM49 Single Auto 115 1 3.8 1/4 11 5
Optional pump stand (P/N 10-2421) available. The stand, made of durable, non-corrosive ABS, attaches securely to the pump and is intended to reduce cloggingby debris, eliminate the need for bricks or blocks under the pump, and provide the ability to raise the intake by adding sections of 1-1/2" or 2" (DN40 or DN50)PVC.
Model 49
Your Peace of Mind is Our Top Priority®
3649 Cane Run Rd | Louisville, KY 40211 USA1-800-928-7867 | Fax: +1 502-774-3624
www.zoeller.comProduct information presented here reflects conditions at time of publication. Consult factory regarding discrepancies or inconsistencies. Copyright 2013. All rights reserved.
