ZNID-GPON-2804P

✓ Standard ITU G.984 GPON

✓ Low profile "wall-plate" style

✓ No exposed fiber or power

✓ Secure attachment

✓ AC or DC powering

"Wall-Plate" ONT for secure and uncluttereddeployments

zNID 2800P Series FiberJACK® GPON ONT

The standards-based Zhone 2800 Series FiberJACK® GPON ONTs comply with standard OMCI definitions, and are manageable at remote sites supporting the fullrange of FCAPS functions including supervision, monitoring and maintenance.

Flexible management means the Zhone 2800 Series FiberJACK® GPON ONTs may beprovisioned using the same intuitive Web interface and CLI as the Zhone 2400, 2600and 4200 Series ONTs, as well as through GPON-standard OMCI, USP (UnifiedService Provisioning), the Zhone Network Management System (ZMS), or using aTR-069 compliant ACS. Software upgrades and configuration backups can behandled automatically by the ZMS using the CPE Manager feature.

and Hospitality deployments requiring secure, zero-footprint wideband access. The FiberJACK wall-plate style ONTsoffer full RG functionality in a low-profile package that keeps power and fiber connections safely hidden within the wall,preventing loss of service due to accidental disconnection, tampering or theft. Rental Housing (Apartments, Condos)and Campus (Dorms, Temporary Housing) deployments will similarly benefit from this robust and low maintenance ONT.

The Zhone 2800 Series FiberJACK GPON ONTs provide customers with 4 10/100/1000BaseT LAN ports, all with PoE capability, allowing for convenient connections to IP phones, switches, and PCs. Configurable per-port PoE limitshelp direct PoE power where it is needed. High-speed internet access and IPTV services are also easily provisioned

All Zhone 2800 Series FiberJACK GPON ONTs mount in a standard single-gang wallbox and are available in two powering versions: AC models are wired directly to the 120/240 VAC supply while DC models may be powered via adedicated CAT5 link from the wiring/powering closet. DC models may also be powered over a 2-wire feed from an in-house 48V distribution system that may also provide battery backup. DC/DC conversion in the ONT ensures that the PoE voltages are presented within spec even when longer 2-wire power feed runs incur significant voltage drops.

Hospitality installations will appreciate the guest-friendly LED indicator modes (Day, Night, Off) on the Zhone 2800 Series FiberJACK GPON ONTs. Extensive diagnostics in the ONT (run locally on the ONT or remotely from the NOC)reduce service call disruptions. A silent alarm is triggered upon removal of the ONT faceplate.

With LLDP-MED support for voice VLAN advertisement and Zhone's Dynamic VLAN Mapping capability for handling complex sets of packet classification rules, operators can expertly manage traffic on each ONT LAN port to provide optimum customer experiences.

The Zhone 2800 Series FiberJACK GPON ONTs comply with standard OMCI definitions, and are manageableat remote sites supporting the full range of FCAPS functions including supervision, monitoring and maintenance.

Flexible management means the Zhone 2800 Series FiberJACK GPON ONTs may be provisioned using the same intuitive Web interface and CLI as the Zhone 2400, 2600 and 4200 Series ONTs, as well as through GPON-standard OMCI, USP (Unified Service Provisioning), the Zhone Network Management System (ZMS), or using a TR-069 compliant ACS. Software upgrades and configuration backups can be handled automatically by the ZMS using the CPE Manager feature.

through flexible management features via the ONT's built-in WebUI, OMCI or USP (Unified Service Provisioning).

The Zhone 2800 Series FiberJACK® GPON ONTs provide the ultimate efficient installation experience for Enterprise

Technical Specifications

DATASHEET

DATASHEETDATASHEETDATASHEETDATASHEETDATASHEETDATASHEETDATASHEET

Dimensions

■ Faceplate:- 5 5/8" H x 4" W x 1 3/16" D- 143mm H x 102 mm W x 30mm D

■ Base:- 2 3/4" H x 1 3/4" W x 1 1/4" D (from wallsurface)- 70mm H x 45 mm W x 32mm D (from wallsurface)

Weight

■ 1.0 LB (0.45 kg)

Power

■ AC Models:- 100-240 VAC 50/60 Hz- Max Power = 40W (ONT + 20W PoE load)- Max Power = 12W (ONT only)

■ DC Models:- 48 VDC (nom.)- Max Power = 40W (ONT + 20W PoE load)- Max Power = 10W (ONT only)

Interfaces

■ GPON- SC/APC connector- Full ITU-T G.984 compliance- 1310nm Tx (Upstream)

- Fixed SFF optics- Tx Line Rate: 1.25 Gbps- Tx Launch Power: +0.5 to +5.0 dBm- Rx Line Rate: 2.5 Gbps- Rx Receiver Sensitivity: -28 dBm- Rx Input Power Overload: -8 dBm- Dying gasp support

■ Ethernet- RJ-45 Jacks- 4 x 10/100/1000 Base-T ports- Meets IEEE 802.3 specifications- Auto-MDI/MDIX and auto speed supported- Per-port Link/Activity, Speed, and PoE status

- PoE support on all ports- Max 20W PoE load per ONT (AC models)- Max 20W PoE load per ONT (DC models)

■ Controls and Indicators- ONT Power On/Off (recessed slide switch)- ONT Reset (recessed push-button switch)- LED Indicator Mode (push-button switch)- LED indicators for Status, Alarm, WAN, and

Config

Standards Support

■ ITU-T G.984 compliant■ IEEE 802.3 Ethernet■ IEEE 802.1q/p VLANs■ IEEE 802.3u Fast Ethernet■ IEEE 802.3ab 1000Base-T■ 802.3at compliant■ 802.1x (specific models)

Protocol Support

■ GPON- Fully ITU-T G.984 compliant framing- 32 T-CONTs per device- 32 GEM Ports per device- Activation with automatic discovered SN and

password in conformance with ITU-T G.984.3- AES-128 Decryption with key generation and

switching- FEC (Forward Error Correction)- 802.1p mapper service profile on U/S- Support for Multicast GEM Port QoS

■ QOS- Ethernet bridging/switching per IEEE

802.1d/802.1q- Traffic management (priority queuing)

- QoS with support for IEEE 802.1p + DSCPVLANS

■ VLANs- Per port IEEE 802.1Q VLAN ID processing- All VLAN IDs supported- VLAN tagging/untagging- VLAN Stacking (QinQ)- VLAN Switching

■ IPTV- IGMP v2 Snooping- VLAN support

■ Layer 2- 802.3n flow control- Automatic MAC learning and aging- Unlimited # of MAC addresses for

OMCI-configured flows- Support for up to 4,096 MAC addresses for RG

traffic flows- Broadcast storm control- LLDP-MED

■ IP Routing and Firewall- PPPoE- NAT/NAPT- Port forwarding- DHCP Server- DNS Server- UPnP

Management

■ OMCI■ Web UI■ CLI■ SNMP■

TR-069

Regulatory Compliance

■ CE■ UL■ FCC Part 15, Class B■ FDA 21CFR1040

Operating Requirements

■ Temperature: 0°C to +40°C■ Humidity: 5% to 95% relative humidity

(non-condensing)

zNID 2800P Series FiberJACK® GPON ONT

- 1490nm Rx (Downstream)

■

USP (Unified Service Provisioning)

indicators

DATASHEET

DATASHEETDATASHEETDATASHEETDATASHEETDATASHEETDATASHEETDATASHEETDATASHEETDATASHEETDATASHEET

Ordering Information

ZNID-GPON-2804P-WAC

ZNID-GPON-2804P-WDC

2012201220122012201220122012201220122012

19 March 2014 09:22:21

zNID 2800P Series FiberJACK® GPON ONT

2014

Indoor GPON ONT, 4 x GE w/PoE, AC PoweredFiberJACK

Indoor GPON ONT, 4 x GE w/PoE, DC PoweredFiberJACK