ZirCAD - Ivoclar Vivadent NZ · Now you only need one assortment to customise and glaze your...
Transcript of ZirCAD - Ivoclar Vivadent NZ · Now you only need one assortment to customise and glaze your...
A na
tura
l gra
dien
t of c
hrom
a an
d tr
ansl
ucen
cy
The Worlds first polychromatic LS2 press ingot
The most aesthetic, high strength multi-translucent zirconia
For Aesthetics, Performance and Reliability, make it e.max.Visit www.makeitemax.com to learn more.
• Premium Aesthetics: Natural gradient of chroma and translucency
Proven reliability• Monolithic High Strength*:
• Increased Productivity: Maximum aesthetics without need for characterisation
ZirCADMULTI
PressMULTI
August – October 2018
* ZirCAD has up to 30% higher flexural strength and 50% higher fracture toughness compared to common high translucent zirconia materials. LS2 strength is 500MPa.
THREE
MONTHEDITION
Please keep this copy
Crown & Bridge
Shades: 8 polychromatic discs BL1, A1, A2, A3, B1, B2, C2, D2Translucency: MT Multi (Medium Translucency Multi)Sizes: Ø98.5mm, 16 and 20mm thicknesses
IPS e.max® ZirCADINNOVATIVE AND VERSATILE ZIRCONIUM OXIDE
IPS e.max® ZIRCAD MultiIPS e.max ZirCAD Multi is a new polychromatic zirconia from Ivoclar Vivadent that provides a whole new level of strength and durability. Designed for both the anterior and posterior region, the integrated progression of shade and translucency in the material maximises the appearance of monolithic crowns and bridges. Extended indication range:• Up to 3-unit bridges in the posterior region
850MPa
SpeedCEM®
Plus Sample Pack for Labs
SpeedCEM® PlusSpeedCEM Plus is used for the permanent cementation of crowns and bridges on natural teeth and on implant abutments that are made of the following restorative materials:• Oxide ceramics such as zirconium oxide, e.g. IPS e.max® ZirCAD• Metal and metal-based restorations• Lithium disilicate glass-ceramics, e.g. IPS e.max®
682455WW
A BIG PLUS
FOR ZIRCONIA
1mmmaterial thickness
Extensive spectrum of indications – Minimal layer thicknessesIngots available:
IPS e.max® Press –THE ORIGINAL 500MPa
• Innovative Multi ingots• HT ingots with high translucency• MT ingots with pronounced brightness• LT ingots with low translucency• MO ingots with medium opacity• HO ingots with high opacity
• Impulse ingots with opalescent effect
Ideal for
ZirCADIPS
®
e.max
2Prices exclude GST, freight & installation, and may change without notice. E & OE.
0508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz
IPS e.max® Ceram SelectionAllows you to combine creativity and passion and offers Enamel and Effect materials that inspire professionals with their brilliant shades and impressive light-optical properties.IPS e.max Ceram Selection comprises twelve materials that are especially designed to give you more room for creativity and individuality in the layering technique. The materials are used in combination with the existing IPS e.max Ceram materials and facilitate the creation of individualised characteristics - with the aim to achieve highly aesthetic, natural looking restorations.The twelve shades are divided into three groups:• Special Enamel – shaded Enamel materials• Light Reflector – light reflecting Effect materials• Light Absorber – light absorbing Effect materials
Crown & Bridge
IPS e.max®
Ceram FOR CUSTOMISED AESTHETIC LAYERING
Programat® Furnace RangeThe Press and Ceramic Furnaces
S1 1600A compact furnace for the sintering of frameworks made of IPS e.max ZirCAD, Zenostar and other zirconium oxide materials at a temperature of up to 1,600 °C.
EP5010 The latest generation in press furnaces. The innovative integrated thermographic camera measures the exact temperature at the surface of the fired object and the investment ring.
P310Characterised by its exceptional user friendliness. The desired programme can be selected quickly and comfortably, either on the high-resolution touch-screen or the proven membrane sealed keypad.
Renfert Genius Brush SetHigh quality, natural hair brushes in a modern design with a protective tip function integrated in the handle.• Includes one each
of size: 2, 4, 6, 8
3Prices exclude GST, freight & installation, and may change without notice. E & OE.
0508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz
Digital
3Shape Lab Scanners• Best value for money – Get advanced scanning features
and CAD design workflows at an affordable price• Fast scanning – High scan speeds let you complete more
cases in less time• Latest technologies – 5 MP cameras, Blue LED and multi-
line scanning for optimal detail capture and accuracy
PrograMill PM7PrograMill PM7 sets new industrial standards for the digital production of restorations in the dental laboratory. This high-powered machine is capable of processing a variety of materials in wet and dry mode and is suitable for a wide spectrum of indications. The high dynamics and efficiency of the machine result in precise and fast production results. The 5-axis machining process is controlled via the integrated PC with touch screen monitor. • 970 Watt power• Servomotors for high speed milling• Intuitive operation and touch-screen display• Integrated CNC PC and intelligent machine management• Ionisor and automatic self cleaning Active Air Suction
Digital DentureDigital Denture is a complete manufacturing process for the rapid digital production of removable full-arch dentures. This innovative process integrates the treatment steps in the dental practice with the digital manufacturing processes in the lab.
GO DIGITAL… WITH HELP FROM THE IVOCLAR DIGITAL TEAM
CHOOSE THE CORRECT MATERIAL FOR YOU• Fixed prosthetics• Removable prosthetics• Process-supporting materials
Ivoclar Digital TeamExcellence in sales and support
Ivoclar Vivadent suppo Digital Team to help digital ready. Our Au
detailed background i with the requisite kno
digital needs, from Digital
Call today on 0508 486 252 and ask for more infomation
and a quote!
1 SCAN
2 MILL
Register for our
3Shape / Ivoclar
Vivadent events at
dentevents.com
AVAILABLE - LIMITED STOCK
ONLY!
>> NEW entry level E scanner range
4Prices exclude GST, freight & installation, and may change without notice. E & OE.
0508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz
Otoflash Curing Unit with Gas Flash-curing device for rapid and reliable curing of light curable resins.The device can be used for the photopolymerisation of all light-curable materials where the curing takes place at a wavelength of 280-580 nm.• Two bulbs• 10 flashes per second• Protective gas, prevents oxygen inhibition layer• Integrated elapsed time meter• Required for biocompatability of long-term intraoral devices/restorations
4 CUREStore in a cool, dark
placeBring back to room
temperature prior to printingAvoid heat Get great printing
results
Printing Material Storage Tips!
Digital
Asiga MAX™
The Asiga MAX is the world’s most advanced lab 3D printer offering exceptional productivity in a small footprint.
Model Materials
GO DIGITAL… WITH HELP FROM THE IVOCLAR DIGITAL TEAM®
Ivoclar Digital TeamExcellence in sales and support
You
deserve the
best support!
CHOOSE THE
IVOCLAR
DIGITAL TEAMIvoclar Vivadent suppo Digital Team to help digital ready. Our Au
detailed background i with the requisite kno
digital needs, from Digital
rts you with an extensive your business become stralasian team have a n digital dentistry, along wledge to cover all your 3D Printing through to Dentures
Call today on 0508 486 252 and ask for more infomation
and a quote!
3 PRINT
ASIGA PlasGRAY V2
ASIGA DentaMODEL
DETAX Freeprint Tray UV
WhipMix Veriguide Clear
5Prices exclude GST, freight & installation, and may change without notice. E & OE.
0508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz
Removables
SR Vivodent® S DCLThe exceptionally aesthetic tooth for sophisticated needsThe SR Vivodent S DCL tooth line is aesthetically and prosthetically optimised to meet the individual needs of today’s and tomorrow’s patients.The shade intensity, brilliance and translucency of these tooth lines closely imitate the properties of natural teeth, resulting in dental prostheses that integrate exceptionally well into the oral surroundings.
Highly cross-linked DCL materialThe new teeth are entirely made of highly cross-linked DCL acrylic (Double Cross-Linked). The result is a material that displays a higher compressive strength but a similar flexibility to conventional PMMA. For this reason, improved denture longevity can be expected.
Advantages• Innovative mould design• A-D and bleach shades• Closely imitate the properties of natural teeth• Highly cross-linked DCL material
Tooth ConsignmentsTooth consignments allow you to keep a good selection of teeth at your fingertips.For effective management of your teeth stock, tooth consignments consist of up to 150 sets of teeth for you to use and replenish on a monthly basis.
A–D and Bleach shades are frequently used in combination prosthetics.
Talk to your Territory Manager about how Tooth Consignments can help your business
PapillameterFacialmeter
Contact your Territory Manager to request a FREE copy of our NEW
Ivoclar Vivadent Teeth Poster
A-DAND BLEACH
SHADES
6Prices exclude GST, freight & installation, and may change without notice. E & OE.
0508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz
Removables
IvoBase® Injector The fully automatic injection unitWith the IvoBase Injector, you can benefit from a fully automated injection and polymerisation process for special PMMA resin materials which are coordinated with the system.
Advantages• “All-in-one“ injector, quick and easy setting into operation
possible• Controlled polymerisation shrinkage for optimal accuracy of fit• No water and compressed air connection necessary (plug and
play)• Compact, modern and ergonomic design; requires only a small
space• OSD indicator: current operating status visible from a great
distance• RMR key for a clear reduction of the residual monomer content• USB port for software updates via PC/Internet• Direct flask heating without water bath permits clean
polymerisation process without annoying steam• Maintenance friendly and easy replacement of the heating
elements due to the removable cover• Versatile injector with various Ivoclar Vivadent and reserve
programmes
Quality products from a single manufacturerThe appropriate tooth for every indication. The highly aesthetic and functional SR Phonares® II tooth line is recommended for the fabrication of quality dentures with IvoBase.
Precision due to the compensation of shrinkageThe consistent flow of material compensates for volume shrinkage during the polymerisation process. The result: precision fit, excellent finish, glossy basal surface.
For health’s sakeAs a result of the predosed units, users benefit from consistent, accurate mixing ratios. In addition, direct skin contact with the monomer is avoided.
BUYAn IvoBase
Injector,
Get a FREE
Flask Set, Hybrid
Kit & HI Kit 20 Pink-V
7Prices exclude GST, freight & installation, and may change without notice. E & OE.
0508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz
Metal Ceramics
IPS InLine®
The traditional Metal-Ceramic
IPS InLine is a leucite-containing veneering ceramic for the conventional layering technique.With IPS InLine, you will achieve the desired shade easily, the desired result quickly and furthermore, IPS InLine restorations are beautiful!
IPS Style®
The Next Generation Metal Ceramic
IPS Style is the first metal-supported ceramic to contain the patented oxyapatite crystal. These crystals in combination with leucite and fluorapatite crystals and the matching glass phases are responsible for the excellent handling characteristics and optical properties of this low-fusing mixed glass-ceramic.
Make it fastIPS Style’s low shrinkage saves you time.
Make it easy The material’s ease of use ensures reliable results.
Make it natural. The patented oxyapatite controls the translucency and depth effect.
Advantages• Easy shade matching• Fast results• Beautiful restorations
Alloys• Ceramic alloys• Implant alloys• Base metal alloys
Equipment• Ceramic furnaces• Press furnaces• Investment materials
Your Benefits
• IPS Style is quick, owing to its low shrinkage • IPS Style is easy because of the individual handling of the
layering materials• IPS Style is aesthetic thanks to the lifelike translucency and
depth effect
Features
• High firing stability of the materials• Flexible contouring properties• Patented oxypatite crystals in all materials
8Prices exclude GST, freight & installation, and may change without notice. E & OE.
0508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz
Alloys | Characterisation
Ivoclar Vivadent Alloys
IPS IvocolorUniversal stains and glazes
IPS Ivocolor is a universal range of Stain and Glaze materials for the Press, CAD and layering ceramics from Ivoclar Vivadent and the IPS e.max ZirCAD zirconia materials.Now you only need one assortment to customise and glaze your restorations. This allows you to work more effectively, improve the economic efficiency of the lab and achieve restorations of a consistently high quality. To ensure that the success of the firing process is not left to chance, we have designed the Programat® series of ceramic furnaces for your efficient use.You can now access selections specifically designed for the IPS Ivocolor firing programmes – saved in your Programat® ceramic furnace.
What advantages does IPS Ivocolor offer you?• Individual freedom in customising restorations due to select
shade compositions• Streamlined handling due to a new paste formulation• High gloss obtainable at firing temperatures as low as 710°C• Untainted gloss results – no grey or white discolouration• Suitable for both high- and low-fusing IPS ceramic materials
MinigoldMinigold is a reduced gold crown and bridge alloy demonstrating outstanding properties.• Wide range of indications• Excellent resistance to oral conditions• Certified biocompatibility• Type 4• Colour: Yellow
Callisto CPGThe palladium-containing, cobalt-based ceramic alloy is characterised by its low density, its wide range of indications and applications.• Low material consumption due to very
low density• Compatible with the most popular
veneering ceramics• Type 5• Colour: White
Aquarius XHA clinically proven silver-free high gold ceramic alloy demonstrating outstanding properties.• Clinically proven• Wide range of indications• Excellent resistance to oral conditions• Certified biocompatibility• Colour: Yellow
MaxigoldGold crown and bridge alloy particularly for full crowns and longspan bridges.• Excellent resistance to oral conditions• Certified biocompatibility• Type 3• Colour: Yellow
High-quality, biocompatible dental alloysWe can look back on a long history of developing high-quality biocompatible dental alloys. Each alloy product is subject to stringent quality checks. A suitable product can be flexibly selected for every indication. The range of alloys includes high-gold alloys, gold-reduced alloys, palladium-based alloys and predominantly base alloys.
IPS Ivocolor Shade Dentine
SD 0
SD 1
SD 2
SD 3
SD 4
SD 5
SD 6
SD 7
SD 8
Shade Incisal
SI 1
SI 2
SI 3
Essence BasicIPS Ivocolor Essence
E 01
E 02
E 03
E 04
E 05
E 06
E 07
E 08
E 09
E 10
E 11
E 12
E 13
E 14
E 15
E 16
E 17
E 18
E 19
E 20
E 21
E 22
E 23
9Prices exclude GST, freight & installation, and may change without notice. E & OE.
0508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz
Erio Workstations
Sole 1 Compact and versatile Single place workstation with adjustable height – from a minimum of 86cm to a maximum of 100cm. Supplied with: • Two drawers with plastic trays
for the working place • Service drawer unit with three
drawers• Includes light shelf, stainless
steel protection plate, compressed air nozzle and integrated vacuum extraction
Erio Filters Type 2004 Yellow RFI 0054 /5
Sole 2Complete dual station • Built-in extraction, lights,
shelves, micromotor holder and air hoses
Erio BoxWorkstation designed to rough trim plaster, to cut and polish metals, to finish precious metals, etc for a cleaner laboratory.• 80cm working space• 1000W extractor motor• 4760cm2 main filter capacity• LED Lamp• Independent adjustment of the air
pressure for the air gun• Micro motor knee control holder • Magnifying lens and automatic
start-stop suction which activates simultaneously when the micro-motor is switched on
Articulators | Workstations
Quadrant• With pins• Wall Clear (726741)• Wall Blue (726743)• Wall-less Clear (726742)• Wall-less Blue (726744)
Artimax® ArticulatorsPremium Tray System• Pins are always registered on the accurate original location not being affected
by dimensional distortion caused by stone setting expansion• Dimensionally true foundation for your crowns & bridges
Why Artimax?• Speed – Takes LESS than 5 minutes per case• Accuracy – eliminates die sway & rotation problems for maximum die stability• Efficiency – Artimax is more efficient than any other system• Versatility – greater than any other brand• Closed Bite Auto Articulation
Full Arch• Wall Clear (726738)• Wall with Silver pins (726740)• Wall-less Clear (726737)• Wall-less with Silver pins (726739)
10Prices exclude GST, freight & installation, and may change without notice. E & OE.
0508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz
LUSTROLSilicone based gloss varnish for sealing and smoothing of permanent soft mollosil® and Molloplast® B silicone based relinings, odour- and tasteless, transparent. • Mixing ratio 1:1
Consumables
Hinriplast® N
Resin-reinforced, fine-flowing super hard type 4 stone• Extremely smooth surface and excellent
edge stability• Resin additives provide longer storage• Use for: Die models, dental arches,
sectioned models, master models in precious and non precious alloys and metal ceramic restorations, check models
• Golden Brown (727983), Ivory (727981), Apricot (727979), Pearl-Grey (727985)
Hinridur® SSynthetic stone Type 3A creamy synthetic hard stone especially suitable for prosthetics and orthodontics. The super-white colour is specially recommended for orthodontic work, and the yellow for working models.• Yellow (727919)• Super-White (727921)
Hinrizit Speed Natural stoneConventional hard stone with a shorter setting time, but with no loss of compressive strength or accuracy. Especially suitable for quick repairs and urgent work. Impressions can be removed after just 10 minutes.• Yellow (727913)
Ernst Hinrichs Dental… Innovation, Quality & Reliability
*Gloss varnish, bottle of catalyst, bottle of pipettes.
Good Morning SprayAntibacterial spray solution for A-silicone based relinings, inhibits plaque and delays accumulation of oral microorganisms for 24 hours, without any adverse effects on the natural oral flora.• Bacteriostatic effect (inhibits bacteria growth) due to
the special combination of active substances, with chlorhexidine and ethereal oils
LUSTER® Extraoral Kit
Specially developed for use on hybrid ceramic restorations providing pre-polishing and high gloss polishing for a coordinated two-stage system. • Occlusal surfaces, cusps and fissures can
be optimally processed without polishing pastes
LUSTER® Twist Kits
Especially developed for the simple high-gloss polishing of all ceramic restorations. • The flexible polishing discs make
it possible to adapt to any surface structure and to reach difficult areas such as occlusal surfaces
• 4 grades of diamond grit
LUSTER® Intraoral Kit
This kit contains specially formulated diamonds to make adjustments to IPS e.max as well as the two-step e.max polishing system to re-glaze IPS e.max® intraorally after the restoration has been placed.
11Prices exclude GST, freight & installation, and may change without notice. E & OE.
0508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz
Renfert
MT3 TrimmersAdvantages• Strong, quiet operation• Quick change of the trimmer table angle using the practical tipping mechanism
(90°/ 98°)• Safety: when the front door is opened a safety switch stops the motor and
water• Uniform coverage by the optimally positioned spray tube prevents clogging of
the trimmer disc• A 10° inclination of the unit provides an optimum view of the model• Easy guidance of the plaster model with the aid of slotted angle lines on the
trimmer table
MT3 Wet Trimmer
“The stable front door can be completely removed and cleaned in a few steps using the quick-release lock. The spray tube can also be removed as easily as the trimmer table for cleaning.”
with Klettfix discDisc plaster quantity: 18kgMaterial type: plaster & investmentApplication: wet
with Marathon discDisc plaster quantity: 1000kgMaterial type: plasterApplication: wet & dry
View all the benefits athttps://youtu.be/nfoPlJRYzX8
* Terms & Conditions apply
12Prices exclude GST, freight & installation, and may change without notice. E & OE.
0508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz
Renfert
EASYview 3DAdvantages• The 3D mode enables natural hand-eye coordination when performing delicate
tasks• Fatigue-free, ergonomic work possible thanks to sustained natural, healthy
posture when viewing objects on the monitor• High-resolution photos and video sequences can be generated in full HD quality
for documentation and communication via a network or integrated USB stick
Details• Precise, safe and controlled work possible under 15x or 20x magnification• Allows a perfect view of objects thanks to daylight LEDs with 5,000 Kelvin• Material-optimised image reproduction using 4 different object modes• Virtually latency-free work permits handling in real time• Full HD 3D monitor with special 3D eyeglasses ensures sharp high-definition
image reproduction• Updateable for the latest software and features• Ideally suited for training purposes and presentations through connection
options for additional 2D monitors or a projector
EASYview 3D Video microscopeand monitor
View all the benefits athttps://youtu.be/RRQODZSvY0g
Talk to your Territory Manager about a demonstration TODAY!
Includes: EASY view 3D head with power supply unit and power cord (incl. LED-lighting), support arm with cable and base with universal clamp, 3D monitor with power supply unit and power cord, 3D polarization glasses, 4 GB USB memory stick, mouse, foot switch, desk pad, Quick Start Guide
* Terms & Conditions apply
13Prices exclude GST, freight & installation, and may change without notice. E & OE.
0508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz
Renfert
Basic masterFine sandblasting unit• Precise blasting with the special mixing chamber technology
(Venturi principle)• Large volume blasting chamber provides maximum freedom
of movement• Ventilation slots ensure optimal ventilation of the blasting
chamber and a clear view (PerfectView-Concept)
Basic classicFine sandblasting unit• Precise blasting with the special mixing
chamber technology (Venturi principle)• Can be extended to 2 tanks without the
use of tools• Efficient working due to the tank
selection switch inside the sandblasting chamber
Vario basicRecyclable and fine sandblasting unit• Can be upgraded with 1 to 4 microblasting tanks• 50% less abrasive consumption due to intelligent
extraction system (only unusable fine dust is removed)• PerfectView:
Innovative LED Technology for best contour and detail recognition
1x 25-70µm, 1x 70-250µm
Fine sandblasting units
* Terms & Conditions apply
1x 25-70µm, 1x 70-250µm
Sandblaster AbrasivesRolloblast 5kg 707001 - 50µm
706997 - 100µm
Cobra 5kg 707000 - 50µm
706990 - 110µm
14Prices exclude GST, freight & installation, and may change without notice. E & OE.
0508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz
Renfert
die:master silver/gold set• Layer thickness: 13µm 705623
die:master blue set• Layer thickness: 20µm 705622
die:master ivory set• Layer thickness: 10µm 705627
die:masterDie varnishesThe die:master system provides you with perfect die preparation as a working basis for conventional and all-ceramic restorations.• Optimally prepared and protected working base with coordinated system components• Hard-wearing die surface due to specially developed plaster hardener and sealer• Effective ultra thin isolating layer on the working base without damage to the varnish• A wide range of hard-wearing die varnishes in four layer thicknesses
and 7 colours• Individual refills available for all components
die:master sets
GEO CrowaxModelling and special waxes• Very good modelling and carving characteristics due to
coordinated material properties• High precision and fitting accuracy due to low shrinkage• Easy adaption of the cervical and undercut wax due to soft and
slightly elastic wax consistency 722092 - Green-transparent, medium hard, 80g
708075 - Blue-transparent, medium hard, 80g 722094 - Red-transparent, medium hard, 80g 708077 - Beige-opaque, medium hard, 80g 708078 - Gray-opaque, medium hard, 80g 708079 - Cervical and undercut wax, red-transparent, soft-medium hard, 80g
Waxlectric IIElectric wax knife with two handpieces• Temperature setting to a precise degree ensures controlled
working processes• Direct access of preferred working temperatures using the
programming function• Fast heat-up rate and low heat transfer to the handle thanks to
the heating element integrated in the tip
Individual Refills
Available
15Prices exclude GST, freight & installation, and may change without notice. E & OE.
0508 IVOCLAR (486 252) www.ivoclarvivadent.co.nz
Dental Photography - Key for successful anterior restorations
1-day Lecture & Hands-on
Wednesday 14 November 2018 - Auckland
Szabolcs Hant6.5 CPD
Aesthetic Restorations with IPS e.max® 2-day Lecture & Hands-on
Monday 12 - Tuesday 13 November 2018 - Auckland
Szabolcs Hant13 CPD
To register for these events, and to see the full calendar of courses and programmes for New Zealand, please visit: www.ivoclarvivadent.co.nz/icdelearn
Ivoclar Vivadent Professional Development 2018
CHRISTCHURCHPhone: 0-3-366 0025Fax: 0-3-377 1625
AUCKLAND (Head Office)Phone: 0-9-914 9999Fax: 0-9-914 9990
Website: www.ivoclarvivadent.co.nz
FREEPHONE: 0508 486 252
Email: [email protected]
Prices do not include GST or Freight & may change without notice • Prices are not applicable to Government, Corporate or Overseas Accounts • Prices valid from 1 August - 31 October 2018These specials are available while stocks last or until the next publication of IVOLAB • E & OE.
Modern digital cameras are versatile and are able to capture photographs with a great amount of detail. However, it is essential to learn the appropriate methods & techniques to handle these sophisticated gadgets to use them optimally in the Dental settings.
In this course, you will learn a coordinated structured approach for capturing effective photographs with your camera and flashes for the purpose of documentation and shade communication.
This lecture will provide a great insight and useful tips for utilising a digital camera as a tool in the Dental Office, & will enhance the level of expertise for both new and experienced photographers.
Imitating nature has always been a great challenge for human race. Creating lifelike restorations is an arduous task, which only a few highly skilled technicians can undertake.
Newer materials are much better & can achieve great results. However, the number of options & techniques could be confusing.
In this course I will show you, how to, and what to choose from the IPS e.max range to create aesthetic restorations resembling natural dentition.
Utilising photographs and free software tools, I will demonstrate how to gather enough data to create a layering diagram, and techniques to choose the appropriate powders for the layering.
Visit the website for updates on the education program
Digital Dentistry & Dental TechnologySYDNEY 21-22 September 2018
STAMFORD PLAZA SYDNEY AIRPORT
TWO DAYS OF LECTURES AND WORKSHOPS ON
DIGITAL DENTISTRY FOR DENTISTS, SPECIALISTS,
DENTAL TECHNICIANS AND DENTAL PROSTHETISTS
MULTIPLE CONCURRENT LECTURES AND WORKSHOPS
dentevents presents...
www.dentaltechnology.com.au
Organised by Dentevents™ a division of Main Street Publishing Pty Ltd ABN 74 065 490 655
www.dentevents.com • [email protected] • Tel: (02) 9929 1900 • Fax: (02) 9929 1999
REGISTRATION FEES
$660 inc gst
EARLYBIRD PRICING
$550 before 21 August
$440 before 21 July
$330 before 21 June
INCLUSIONSRegistration fee includes participation in TWO full days of education (12 CPD hours).
Multiple lectures and workshops are being run concurrently to allow you to build your own program to suit your specific interests. Price is all inclusive.
PROGRAMME DETAILS
FRIDAY 21 SEPTEMBER
9.00Am - 5.00pm - educAtion
5.00pm - 8.00pm - cocktAils
SATURDAY 22 SEPTEMBER
9.00Am - 5.00pm - educAtion
12HOURS CPD
mAJor sponsor educAtion sponsors industry supporters
See www.dentaltechnology.com.au to register and for full details
PROGRAMME DETAILS
FRIDAY 21 SEPTEMBER
9.00Am - 5.00pm - educAtion
5.00pm - 8.00pm - cocktAils
SATURDAY 22 SEPTEMBER
9.00Am - 5.00pm - educAtion
REGISTRATION FEES
AUD $660EARLYBIRD PRICING
$550 before 21 August
$440 before 21 July
12HOURS CPD
Digital Smile Design, Digital Dentures, Digital Orthodontics, Digital Implantology, Digital Restorations, CAD and CAM, 3D Printing, Intraoral Scanning, Milling and much more...
Lectures and workshops with US digital dentistry
guru Lee Culp and more than a dozen other experts in clinical and technical dentistry all in one place...
creativity, aesthetic
reliability, reproducibility
Manual vs Digital All CeramicsWhat can I do with CAD CAM technology? Where do I apply manual work? Bringing these topics together.
1-day Lecture ONLY Wednesday 12 September 2018 – Christchurch
1-day Lecture & Workshop Friday 14 September 2018 – Auckland
Roger Zund
5 or 7 CPD
LECTURE ONLY
CHRISTCHURCH
OR
LECTURE &
HANDS-ON
AUCKLAND
This lecture/workshop will focus on the strategic points to achieve aesthetic and successful restorations for anterior teeth (IPS e.max® ZirCAD MT or IPS e.max® CAD) - staining and Cut-Back technique.