Zinc-Free KCM Hydraulic oil Super EX 46HNs-Center/kcm...KCM Hyd Oil Line Card_D.indd Created Date...
2
Quality and Performance Hydro-cracked base + zinc-free additives = 4,000-hour superior performance = money saved! KCM Quality ● Warranty approved service life of 4,000 hours. ● Fully compatible with all KCM materials and components (seals, hoses, pumps, etc.). ● Factory-filled in all KCM machines. ● The result of thousands of hours of laboratory and field-testing. ● Supported by KCM and the manufacturer’s service engineers. KCM Performance ● Outperforms conventional hydraulic oils in every significant standard. ● Provides more performance and protection than most synthetics. ● 4,000-hour interval can lower your annual hydraulic oil expenditures. Zinc-Free KCM Hydraulic oil Super EX 46HN A hydraulic oil so advanced it improves performance, provides increased protection, and lowers costs.
Transcript of Zinc-Free KCM Hydraulic oil Super EX 46HNs-Center/kcm...KCM Hyd Oil Line Card_D.indd Created Date...
Quality and PerformanceHydro-cracked base + zinc-free additives = 4,000-hour superior performance = money saved!
KCM Quality
● Warranty approved service life of 4,000 hours.
● Fully compatible with all KCM materials and components (seals, hoses, pumps, etc.).
● Factory-filled in all KCM machines.
● The result of thousands of hours of laboratory and field-testing.
● Supported by KCM and the manufacturer’s service engineers.
KCM Performance
● Outperforms conventional hydraulic oils in every significant standard.
● Provides more performance and protection than most synthetics.
● 4,000-hour interval can lower your annual hydraulic oil expenditures.
Zinc-Free KCM Hydraulic oil Super EX 46HN
A hydraulic oil so advanced it improves performance, provides increased protection, and lowers costs.
2140 Barrett Park Drive, Suite 101
Kennesaw, GA 30144 U.S.A.
www.KCMCORP.com
Leading hydraulic oils were tested side-by-side in a severe pump test to learn how well they withstood high pressures, high temperatures, and the resulting oxidation. Used oil samples were taken at 200 and 500 hours and compared to an oil sample at the start of the test. KCM 46HN samples show much less color change, indicating much less oxidation.
Test: circulating pump test, 80°C (180° F), pump pressure: 350 kg/cm2 (5,000 psi)
Oil At Start Oil After 200 Test Hours Oil After 500 Test Hours
Item Unit KCM Super EX 46HN
Viscosity Index — 125
Pour Point °C (°F) -42.5 (-44.5)
Flash Point (C.O.C) °C (°F) 238 (460.4)
Color (ASTM) — L0.5
Copper Corrosion (100°C/212°F, 3Hr) — 1(lb)
Density (15°C/60°F) (lb./in3) 0.85868 (0.31)
Kinematic Viscosity (40°C/104°F) mm2/s 47.78 cSt
Kinematic Viscosity (100°C/212°F) mm2/s 7.673 cSt
BENEFITS
Zinc-Free KCM 46HN Hydraulic Oil Conventional Zinc Hydraulic Oil
The Reduction Of Metal Wear
● Extends the life of your equipment by dramatically reducing metal wear.
● Molecularly binds to exposed metal surfaces, preventing metal-to-metal contact, even at extreme pressures.
● Prevents the generation of acids that can corrode your equipment.
● Neutralizes acids.
The Benefits Of Viscosity Retention
● Superior extreme-temperature performance. Fewer seasonal oil changes — operates down to -20°C (-4°F).
● Permits long hours of continuous equipment operation.
● Reduced “warm-up” time.
● Increased fuel efficiency.
TYPICAL VALUE
KCM 46HN
Brand “A”
Brand “B”
KCM 46HN
Brand “A”
Brand “B”
KCM 46HN
Brand “A”
Brand “B”
Oxidation inhibition and resistance against oxidation
● Pure, hydro-cracked base oil resists oxidation.
● Maintains viscosity within specifications at extreme temperatures.
● Reduces operating temperatures.
● Extends the lubricant’s service life.
● Reduces varnish and carbon deposits.
● Improves fuel efficiency.
The differences in sludge generation can be seen in the hydraulic equipment itself. Pictured below are hydraulic tanks run under identical conditions and time. One tank contained the zinc-free KCM 46HN and the other a zinc hydraulic oil.
PN for five-gallon pails: IDE VG46
PN for 265-gallon tote: IDE VG46TOTE
